Commit graph

388,156 commits

Author SHA1 Message Date
Felipe Balbi
341a71c790 usb: musb: remove all 'select' from Kconfig
those are quite unnecessary, the only thing
we need to be careful about is USB_OTG_UTILS
which get properly selected by PHY drivers.

For now, MUSB will select only USB_OTG_UTILS
until we add stubs for the cases when PHY
layer isn't enabled.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-05 13:22:40 +02:00
Kukjin Kim
d97fedef91 gpio: samsung: fixes build warning with s3c2410_defconfig
commit 7b45ed96 ("ARM: S3C24XX: handle s3c2412 eints using new
infrastructure") introduced build warning and this patch fixes
that:

drivers/gpio/gpio-samsung.c: In function 's3c24xx_gpiolib_fbank_to_irq':
drivers/gpio/gpio-samsung.c:1126:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses]

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-05 20:21:36 +09:00
Heiko Stuebner
1c8408e313 ARM: S3C24XX: handle s3c2412 eints using new infrastructure
The s3c2412 handles the eints 0 to 3 different than all the other SoCs
of the 24xx range. These eints must be acked and masked in the regular
bits as well as the bits 0 to 3 of the eint registers, which are unused
on the other SoCs.

This of course can be realized using the new infrastructure with the
eint bits in the main register being the parent interrupts of the
same bits in the eint register.

The s3c2412 therefore gets its own IRQ_EINT0 to 4 constants that
reside in the newly created gap before IRQ_EINT4. gpio-samsung, as the
only user of these is modified to return the correct values when
handling gpio_to_irq requests on s3c2412 based machines.

Due to lack of hardware this is compile tested only, but should
hopefully work as intended.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-05 20:21:31 +09:00
Heiko Stuebner
9eecbe5096 ARM: S3C24XX: add soc_is_s3c2412 option
Makes it possible to identify s3c2412 SoCs.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-05 20:21:26 +09:00
Heiko Stuebner
5424f2188a ARM: S3C24XX: include first 4 bits of the eint register in irq mapping
This patch moves the irq numbers starting with EINT4 4 points down to
enable the inclusion of the first 4 bits of EINT register into the mapping
removing the need for special offset handling.

For most S3C24XX architectures this will simply create 4 additional unused
interrupts, but enables the S3C2412 to make use of the new infrastructure
to realize its special handling of the EINT0 to EINT3 interrupts.

All affected parts of the Samsung code (arch + drivers) seem to use the
real interrupt defines (IRQ_something) and not any form of S3C2410_IRQ(x)
whose numbering is changed here starting from S3C2410_IRQ(32).

This patch was runtime-tested on a s3c2416 based board.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-05 20:21:21 +09:00
Heiko Stuebner
4245944c71 ARM: S3C24XX: transform s3c2412 irqs into new structure
Contains only the new mapping structure. The special handling
of the eint0 to eint3 interrupts still needs to be solved.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-05 20:21:16 +09:00
Heiko Stuebner
0da09930d5 ARM: S3C24XX: modify s3c2412 irq init to initialize all irqs
Combines the two independent init steps for the irqs into one.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-05 20:21:09 +09:00
Heiko Stuebner
d3d5a2c9e6 ARM: S3C24XX: move s3c2412 irq init to common code
Base for further cleanups

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-05 20:21:04 +09:00
Heiko Stuebner
592957085e ARM: S3C24XX: use samsung_sync_wakemask in s3c2412 pm
Originally the s3c2412 used a overidden irq chip to set the rtc wakeup flag.
But with using the samsung_sync_wakemask function the same can be achieved
without introducing soc specific irq functions.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-05 20:20:59 +09:00
Heiko Stuebner
f0301673ff ARM: S3C24XX: transform s3c2440 irqs into new structure
As always a mapping structure is everything needed.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-05 20:20:54 +09:00
Heiko Stuebner
70644ade48 ARM: S3C24XX: transform s3c2442 irqs into new structure
Simply declare a correct mapping structure to use the common irq code.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-05 20:20:49 +09:00
Heiko Stuebner
7cefed5e6b ARM: S3C24XX: integrate s3c2440 irqs into common init
Now all the arch_initcalls for s3c244x irqs are gone.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-05 20:20:43 +09:00
Heiko Stuebner
2286cf467e ARM: S3C24XX: move s3c2440 irqs to common irq code
Will be integrated in the following patch.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-05 20:20:38 +09:00
Heiko Stuebner
ce6c164bf0 ARM: S3C24XX: create dedicated irq init functions for s3c2440 and s3c2442
s3c2440 and s3c2442 need separate init functions, as the s3c2440 contains
even more differing irqs that will be moved in the following patch.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-05 20:20:33 +09:00
Heiko Stuebner
6f8d7ea275 ARM: S3C24XX: move s3c244x irq init to common irq code
Base for further modifications.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-05 20:20:27 +09:00
Romain Naour
ad38bdd15d ARM: SAMSUNG: Remove unused plat-samsung/time.c
Signed-off-by: Naour Romain <romain.naour@openwide.fr>
Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-05 20:19:54 +09:00
Romain Naour
6a5a2e3b0d ARM: S5PC100: Add samsung-time support for s5pc100
Signed-off-by: Naour Romain <romain.naour@openwide.fr>
Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-05 20:19:54 +09:00
Romain Naour
04a49b710d ARM: S3C64XX: Add samsung-time support for s3c64xx
Signed-off-by: Naour Romain <romain.naour@openwide.fr>
[tomasz.figa@gmail.com: tested on a Tiny6410 board]
Reviewed-and-Tested-by: Tomasz Figa <tomasz.figa@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-05 20:19:53 +09:00
Romain Naour
7f78b6eb5f ARM: S3C24XX: Add samsung-time support for s3c24xx
Signed-off-by: Naour Romain <romain.naour@openwide.fr>
Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com>
[heiko@sntech.de: tested on a s3c2416 based machine]
Reviewed-and-Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-05 20:16:38 +09:00
Romain Naour
c1fcd403ce ARM: SAMSUNG: Rename s5p-time to samsung-time
Signed-off-by: Naour Romain <romain.naour@openwide.fr>
Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-05 20:15:55 +09:00
Nishanth Menon
43febb27dc usb: gadget: composite: fix kernel-doc warnings
A few trivial fixes for composite driver:

Warning(include/linux/usb/composite.h:165): No description found for parameter
	'fs_descriptors'
Warning(include/linux/usb/composite.h:165): Excess struct/union/enum/typedef
	member 'descriptors' description in 'usb_function'
Warning(include/linux/usb/composite.h:321): No description found for parameter
	'gadget_driver'
Warning(drivers/usb/gadget/composite.c:1777): Excess function parameter 'bind'
	description in 'usb_composite_probe'

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Kosina <trivial@kernel.org>
Cc: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-05 13:15:00 +02:00
Stephen Hemminger
fbe2d3616c EDAC: Make sysfs functions static
Fixes lots of sparse warnings here.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-03-05 11:33:57 +01:00
Axel Lin
ea88b132ac regulator: max8649: Use enable_is_inverted flag with regulator_enable_regmap and friends APIs
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-05 17:56:40 +08:00
Axel Lin
318c658b7c regulator: 88pm8607: Use enable_is_inverted flag with regulator_enable_regmap and friends APIs
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-05 17:56:40 +08:00
Axel Lin
51dcdafcb7 regulator: core: Add enable_is_inverted flag to indicate set enable_mask bits to disable
Add enable_is_inverted flag to indicate set enable_mask bits to disable
when using regulator_enable_regmap and friends APIs.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-05 17:56:39 +08:00
Kukjin Kim
eb50cd0b2a ARM: S5PV210: remove useless ifdef in common.h
The mach-s5pv210 should be complied with selecting CPU_S5PV210,
so the 'ifdef' in common.h is not required.

Reported-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-05 18:37:10 +09:00
Kukjin Kim
968f52148a ARM: S5PC100: remove useless ifdef in common.h
The mach-s5pc100 should be complied with selecting CPU_S5PC100,
so the 'ifdef' in common.h is not required.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-05 18:37:10 +09:00
Mark Brown
0ac682db5c Merge remote-tracking branch 'regulator/fix/doc' into regulator-enable-invert 2013-03-05 17:36:10 +08:00
Carolyn Wyborny
603e86fa39 igb: Fix for lockdep issue in igb_get_i2c_client
This patch fixes a lockdep warning in igb_get_i2c_client by
refactoring the initialization and usage of the i2c_client
completely.  There is no on the fly allocation of the single
client needed today.

Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-05 01:25:27 -08:00
Heiko Carstens
f6a70a0707 s390/mm: fix flush_tlb_kernel_range()
Our flush_tlb_kernel_range() implementation calls __tlb_flush_mm() with
&init_mm as argument. __tlb_flush_mm() however will only flush tlbs
for the passed in mm if its mm_cpumask is not empty.

For the init_mm however its mm_cpumask has never any bits set. Which in
turn means that our flush_tlb_kernel_range() implementation doesn't
work at all.

This can be easily verified with a vmalloc/vfree loop which allocates
a page, writes to it and then frees the page again. A crash will follow
almost instantly.

To fix this remove the cpumask_empty() check in __tlb_flush_mm() since
there shouldn't be too many mms with a zero mm_cpumask, besides the
init_mm of course.

Cc: stable@vger.kernel.org
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-03-05 10:21:36 +01:00
Daniel Vetter
15239099d7 drm/i915: enable irqs earlier when resuming
We need it to restore the ilk rc6 context, since the gpu wait no
requires interrupts. But in general having interrupts around should
help in code sanity, since more and more stuff is interrupt driven.

This regression has been introduced in

commit 3e9605018a
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Tue Nov 27 16:22:54 2012 +0000

    drm/i915: Rearrange code to only have a single method for waiting upon the ring

Like in the driver load code we need to make sure that hotplug
interrupts don't cause havoc with our modeset state, hence block them
with the existing infrastructure. Again we ignore races where we might
loose hotplug interrupts ...

Note that the driver load part of the regression has already been
fixed in

commit 52d7ecedac
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Sat Dec 1 21:03:22 2012 +0100

    drm/i915: reorder setup sequence to have irqs for output setup

v2: Add a note to the commit message about which patch fixed the
driver load part of the regression. Stable kernels need to backport
both patches.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=54691
Cc: stable@vger.kernel.org (for 3.8 only, plese backport
			    52d7ecedac first)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reported-and-Tested-by: Ilya Tumaykin <itumaykin@gmail.com>
Reviewed-by: Chris wilson <chris@chris-wilson.co.uk> (v1)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-05 10:21:36 +01:00
Heiko Carstens
a7bb1ae749 s390/mm: fix vmemmap size calculation
The size of the vmemmap must be a multiple of PAGES_PER_SECTION, since the
common code always initializes the vmemmap in such pieces.
So we must round up in order to not have a too small vmemmap.

Fixes an IPL crash on 31 bit with more than 1920MB.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-03-05 10:21:35 +01:00
Martin Schwidefsky
6551fbdfd8 s390: critical section cleanup vs. machine checks
The current machine check code uses the registers stored by the machine
in the lowcore at __LC_GPREGS_SAVE_AREA as the registers of the interrupted
context. The registers 0-7 of a user process can get clobbered if a machine
checks interrupts the execution of a critical section in entry[64].S.

The reason is that the critical section cleanup code may need to modify
the PSW and the registers for the previous context to get to the end of a
critical section. If registers 0-7 have to be replaced the relevant copy
will be in the registers, which invalidates the copy in the lowcore. The
machine check handler needs to explicitly store registers 0-7 to the stack.

Cc: stable@vger.kernel.org
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-03-05 10:21:35 +01:00
Paul Bolle
fdc5663c1b HID: Kconfig: fix "-- help---"
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-03-05 10:16:45 +01:00
Carolyn Wyborny
ed65bdd8c0 igb: Fix link setup for I210 devices
This patch changes the setup copper link function to use a switch
statement for the PHY id's available for the given PHY types.  It
also adds a case for the I210 PHY id, so the appropriate setup link
function is called for it.

Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-05 01:16:45 -08:00
Alexander Duyck
e4f7dbb17e igb: Drop BUILD_BUG_ON check from igb_build_rx_buffer
On s390 the igb driver was throwing a build error due to the fact that a frame
built using build_skb would be larger than 2K.  Since this is not likely to
change at any point in the future we are better off just dropping the check
since we already had a check in igb_set_rx_buffer_len that will just disable
the usage of build_skb anyway.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-05 01:08:45 -08:00
Stéphane Marchesin
0920a48719 drm/i915: Increase the RC6p threshold.
This increases GEN6_RC6p_THRESHOLD from 100000 to 150000. For some
reason this avoids the gen6_gt_check_fifodbg.isra warnings and
associated GPU lockups, which makes my ivy bridge machine stable.

Signed-off-by: Stéphane Marchesin <marcheu@chromium.org>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-05 10:02:00 +01:00
Bruce Allan
e08f626b33 e1000e: workaround DMA unit hang on I218
At 1000Mbps link speed, one of the MAC's internal clocks can be stopped for
up to 4us when entering K1 (a power mode of the MAC-PHY interconnect).  If
the MAC is waiting for completion indications for 2 DMA write requests into
Host memory (e.g. descriptor writeback or Rx packet writing) and the
indications occur while the clock is stopped, both indications will be
missed by the MAC causing the MAC to wait for the completion indications
and be unable to generate further DMA write requests.  This results in an
apparent hardware hang.

Work-around the issue by disabling the de-assertion of the clock request
when 1000Mbps link is acquired (K1 must be disabled while doing this).

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-05 01:01:43 -08:00
Dave Airlie
64e38a8c8d Merge branch 'drm-nouveau-fixes-3.9' of git://anongit.freedesktop.org/git/nouveau/linux-2.6
misc regression fixes from Ben.

* 'drm-nouveau-fixes-3.9' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
  drm/nv50-: prevent some races between modesetting and page flipping
  drm/nouveau/i2c: drop parent refcount when creating ports
  drm/nv84: fix regression in page flipping
  drm/nouveau: Fix typo in init_idx_addr_latched().
  drm/nouveau: Disable AGP on PowerPC again.
  drm/nve0/graph: some random reg moved on kepler
2013-03-05 18:53:15 +10:00
Konrad Rzeszutek Wilk
67e2cba459 zcache/debug: Coalesce all debug under CONFIG_ZCACHE_DEBUG
and also define this extra attribute in the Kconfig entry.

Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-05 16:43:10 +08:00
Konrad Rzeszutek Wilk
1dba904ca9 zcache: Module license is defined twice.
The other (same license) is at the end of the file.

Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-05 16:43:10 +08:00
Konrad Rzeszutek Wilk
86d7de66dd zcache: Move the last of the debugfs counters out
We now have in zcache-main only the counters that are
are not debugfs related.

Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-05 16:43:10 +08:00
Konrad Rzeszutek Wilk
9c0ad59ef4 zcache/debug: Use an array to initialize/use debugfs attributes.
It makes it neater and also allows us to piggyback on that
in the zcache_dump function.

Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-05 16:43:09 +08:00
Konrad Rzeszutek Wilk
95bdaee214 zcache: Move debugfs code out of zcache-main.c file.
Note that at this point there is no CONFIG_ZCACHE_DEBUG
option in the Kconfig. So in effect all of the counters
are nop until that option gets re-introduced in:
zcache/debug: Coalesce all debug under CONFIG_ZCACHE_DEBUG

Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
[v1: Fixed conflicts due to rebase]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-05 16:43:09 +08:00
Konrad Rzeszutek Wilk
a96138be77 zcache: Make the debug code use pr_debug
as if you are debugging this driver you would be using 'debug'
on the command line anyhow - and this would dump the debug
data on the proper loglevel.

While at it also remove the unconditional #define ZCACHE_DEBUG.

Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-05 16:41:35 +08:00
Konrad Rzeszutek Wilk
e0d11aed19 zcache: The last of the atomic reads has now an accessory function.
And now we can move the code ([inc|dec]_zcache_[*]) to their own file
with a header to make them nops or feed in debugfs.

Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-05 16:41:35 +08:00
Konrad Rzeszutek Wilk
6f4336fbbe zcache: Provide accessory functions for counter decrease.
This way we can have all wrapped with these functions and
can disable/enable this with CONFIG_DEBUG_FS.

Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
[v2: Rebase on top of staging/zcache: Fix/improve zcache writeback code, tie to a config option]
[v3: Rebase on top of zcache: Fix compile warnings due to usage of debugfs_create_size_t]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-05 16:41:35 +08:00
Konrad Rzeszutek Wilk
3f007ca449 zcache: Provide accessory functions for counter increase
This is the first step in moving the debugfs code out of the
main file in-to another file. And also allow the code to run
without CONFIG_DEBUG_FS defined.

Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
[v2: Rebase on top staging/zcache: Fix/improve zcache writeback code, tie to a config option]
[v3: Rebase on top of zcache: Fix compile warnings due to usage of debugfs_create_size_t]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-05 16:41:35 +08:00
Konrad Rzeszutek Wilk
7937d74aa2 zcache: s/int/bool/ on the various options.
There are so many, but this allows us to at least have them
right in as bool.

Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
[v1: Rebase on ramster->zcache move]
[v2: Rebase on staging/zcache: Fix/improve zcache writeback code, tie to a config option]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-05 16:41:35 +08:00
Charndeep Grewal
1e70bd46a5 staging: android: logger: enforce GID and CAP check on log flush
Restrict log flushing to those in the logs group, or
anyone with CAP_SYSLOG.

Cc: Android Kernel Team <kernel-team@android.com>
Cc: Charndeep Grewal <csgrewa@tycho.ncsc.mil>
Signed-off-by: Charndeep Grewal <csgrewa@tycho.ncsc.mil>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-05 16:38:44 +08:00