Commit graph

388,156 commits

Author SHA1 Message Date
Lee Jones
c28f800475 ARM: ux500: Provide a means to obtain the SMSC9115 clock when DT is enabled
Device Tree names devices differently to how some frameworks expect
them. Until we can move a platform over to the new way of obtaining
resources, we have to use the OF_DEV_AUXDATA() macros to craft a
device name which can be used in searches during allocation time.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-01 23:23:19 +01:00
Lee Jones
fa17f9f3ef ARM: ux500: Include the PRCMU's Secure Registers in DB8500's DT
Currently we only include the PRCMU's primary registers when
referencing the register count in the 'reg' property. This patch
expands that count to include the secure registers also.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-01 23:22:08 +01:00
Lee Jones
7cf261dd1e ARM: ux500: Change IRQ from low-to-high edge triggered to high-to-low
When the STMPE IRQ is triggered to be active high level-sensitive, the
Nomadik GPIO controller it uses complains, although it still works.
Recently we attempted to move triggering to low-to-high in an attempt
to prevent the warning; however, this ensured that the IRQ was actually
missed completely. Now we have a solution which both works and keeps the
GPIO controller happy.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-01 23:20:14 +01:00
Randy Dunlap
8eae508b7c hsi: fix kernel-doc warnings
Fix kernel-doc warnings in hsi files:

  Warning(include/linux/hsi/hsi.h:136): Excess struct/union/enum/typedef member 'e_handler' description in 'hsi_client'
  Warning(include/linux/hsi/hsi.h:136): Excess struct/union/enum/typedef member 'pclaimed' description in 'hsi_client'
  Warning(include/linux/hsi/hsi.h:136): Excess struct/union/enum/typedef member 'nb' description in 'hsi_client'
  Warning(drivers/hsi/hsi.c:434): No description found for parameter 'handler'
  Warning(drivers/hsi/hsi.c:434): Excess function parameter 'cb' description in 'hsi_register_port_event'

Don't document "private:" fields with kernel-doc notation.
If you want to leave them fully documented, that's OK, but
then don't mark them as "private:".

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Carlos Chinea <carlos.chinea@nokia.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-01 13:39:00 -08:00
Tkhai Kirill
cb29529ea0 sunsu: Fix panic in case of nonexistent port at "console=ttySY" cmdline option
If a machine has X (X < 4) sunsu ports and cmdline
option "console=ttySY" is passed, where X < Y <= 4,
than the following panic happens:

Unable to handle kernel NULL pointer dereference
TPC: <sunsu_console_setup+0x78/0xe0>
RPC: <sunsu_console_setup+0x74/0xe0>
I7: <register_console+0x378/0x3e0>
Call Trace:
 [0000000000453a38] register_console+0x378/0x3e0
 [0000000000576fa0] uart_add_one_port+0x2e0/0x340
 [000000000057af40] su_probe+0x160/0x2e0
 [00000000005b8a4c] platform_drv_probe+0xc/0x20
 [00000000005b6c2c] driver_probe_device+0x12c/0x220
 [00000000005b6da8] __driver_attach+0x88/0xa0
 [00000000005b4df4] bus_for_each_dev+0x54/0xa0
 [00000000005b5a54] bus_add_driver+0x154/0x260
 [00000000005b7190] driver_register+0x50/0x180
 [00000000006d250c] sunsu_init+0x18c/0x1e0
 [00000000006c2668] do_one_initcall+0xe8/0x160
 [00000000006c282c] kernel_init_freeable+0x12c/0x1e0
 [0000000000603764] kernel_init+0x4/0x100
 [0000000000405f64] ret_from_syscall+0x1c/0x2c
 [0000000000000000]           (null)

1)Fix the panic;
2)Increment registered port number every successful
probe.

Signed-off-by: Kirill Tkhai <tkhai@yandex.ru>
CC: David Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-01 13:31:36 -08:00
Russell King
ded3ef0fa7 ARM: Fix broken commit 0cc41e4a21 corrupting kernel messages
Commit 0cc41e4a21 (arch: remove direct definitions of KERN_<LEVEL>
uses) is broken - not enough thought was put into changing:

	.asciz	"string"

to

	.asciz	"string1" "string2"

The problem is that each string gets _separately_ NUL terminated, so
the result is a string containing:

	"string1\0string2\0"

rather than:

	"string1string2\0"

With our new printk levels, this ends up as - eg, KERN_DEBUG "string":

	0x01 0x00 0x07 0x00 "string" 0x00

which produces lots of \x01 in the kernel log.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-01 21:09:59 +00:00
Dan Carpenter
81ce0dbc11 sctp: use the passed in gfp flags instead GFP_KERNEL
This patch doesn't change how the code works because in the current
kernel gfp is always GFP_KERNEL.  But gfp was obviously intended
instead of GFP_KERNEL.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-01 15:59:56 -05:00
Neil Horman
d8c6f4b9b7 ipv[4|6]: correct dropwatch false positive in local_deliver_finish
I had a report recently of a user trying to use dropwatch to localise some frame
loss, and they were getting false positives.  Turned out they were using a user
space SCTP stack that used raw sockets to grab frames.  When we don't have a
registered protocol for a given packet, we record it as a drop, even if a raw
socket receieves the frame.  We should only record the drop in the event a raw
socket doesnt exist to receive the frames

Tested by the reported successfully

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: William Reich <reich@ulticom.com>
Tested-by: William Reich <reich@ulticom.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: William Reich <reich@ulticom.com>
CC: eric.dumazet@gmail.com
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-01 15:56:29 -05:00
David S. Miller
9e0aab8649 Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
John W. Linville says:

====================
This is another flurry of fixes intended for the 3.9 stream...

A mac80211 pull from Johannes:

"Seth fixes a stupid bug I introduced into one of his earlier patches,
Chun-Yeow fixes mesh forwarding and Felix fixes monitor mode. I myself
fixed a small locking issue and, the biggest change here, removed some
nl80211 information with which sometimes the per wiphy information was
getting too large for the typical 4k-minus-overhead. In my -next tree I
have a patch to allow splitting that and add back the information
removed now."

An iwlwifi pull from Johannes:

"I have a fix for a pretty important bug regarding DMA mapping, that
could cause the DMA engine to overwrite data we wanted to send to it, so
that the next time we send it it would be bad. This particularly affects
calibration results. Other than that, three little fixes for the MVM
driver."

But wait, there's more!

Avinash Patil fixes an incorrectly timed delay in mwifiex.

Bing Zhao prevents a crash in SD8688 caused by failing to properly
set a flag before issuing a command.

Felix Fietkau is the big here this time, providing a trio of minor
ath9k fixes and correcting the advertised interface combinations for
rt2x00 when mesh support is disabled.

Finally, Hauke Mehrtens gives us a patch that correctlin initializes
a spin lock in the bcma code.

Please let me know if there are problems!
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-01 15:54:12 -05:00
Linus Torvalds
cc73dc04c7 Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6
Pull CIFS fixes from Steve French:
 "Four cifs fixes (including for kernel bug #53221 and samba bug #9519)"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: bugfix for unreclaimed writeback pages in cifs_writev_requeue()
  cifs: set MAY_SIGN when sec=krb5
  POSIX extensions disabled on client due to illegal O_EXCL flag sent to Samba
  cifs: ensure that cifs_get_root() only traverses directories
2013-03-01 12:05:13 -08:00
Tim Gardner
5140a8ceaa autofs4 - autofs4_catatonic_mode(): remove redundant null check on kfree()
smatch analysis:

  fs/autofs4/waitq.c:46 autofs4_catatonic_mode() info: redundant null check on wq->name.name calling kfree()

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: autofs@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-01 12:04:39 -08:00
Peter Huewe
9d8072e7c3 autofs - Fix sparse warning: context imbalance in autofs4_d_automount() different lock contexts for basic block
Sparse complains:

  fs/autofs4/root.c:409:9: sparse: context imbalance in 'autofs4_d_automount' - different lock contexts for basic block

This was introduced by commit f55fb0c243 ("autofs4 - dont clear
DCACHE_NEED_AUTOMOUNT on rootless mount")

The function autofs4_d_automount can be left with the (&sbi->fs_lock)
held if sbi->version <= 4 and simple_empty(dentry) == false so the
warning seems valid.

--> Add an spin_unlock in this case before we jump to done

Unfortunately compile tested only.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-01 12:04:39 -08:00
Paul Gortmaker
180e001cd5 btrfs: fixup/remove module.h usage as required
We want to avoid module.h where posible, since it in turn includes
nearly all of header space.  This means removing it where it is not
required, and using export.h where we are only exporting symbols via
EXPORT_SYMBOL and friends.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-03-01 15:01:01 -05:00
Guillaume Nault
8b82547e33 l2tp: Restore socket refcount when sendmsg succeeds
The sendmsg() syscall handler for PPPoL2TP doesn't decrease the socket
reference counter after successful transmissions. Any successful
sendmsg() call from userspace will then increase the reference counter
forever, thus preventing the kernel's session and tunnel data from
being freed later on.

The problem only happens when writing directly on L2TP sockets.
PPP sockets attached to L2TP are unaffected as the PPP subsystem
uses pppol2tp_xmit() which symmetrically increase/decrease reference
counters.

This patch adds the missing call to sock_put() before returning from
pppol2tp_sendmsg().

Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-01 14:13:09 -05:00
John W. Linville
98b7ff9a49 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem 2013-03-01 13:52:03 -05:00
Johannes Berg
24af717c35 mac80211: fix VHT MCS calculation
The VHT MCSes we advertise to the AP were supposed to
be restricted to the AP, but due to a bug in the logic
mac80211 will advertise rates to the AP that aren't
even supported by the local device. To fix this skip
any adjustment if the NSS isn't supported at all.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-01 19:20:25 +01:00
Lans Zhang
2dead15fb8 x86_64: Use __BOOT_DS instead_of __KERNEL_DS for safety
In startup_32, the running code still uses the initial GDT
located in setup. Thus, __BOOT_DS is preferred. Currently
__KERNEL_DS is lucky to equal to __BOOT_DS, but this is
not always a safe way.

Signed-off-by: Lans Zhang <lans.zhang2008@gmail.com>
Link: http://lkml.kernel.org/r/51300267.6000008@gmail.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-03-01 10:18:33 -08:00
Josef Bacik
124fe663f9 Btrfs: delete inline extents when we find them during logging
Apparently when we do inline extents we allow the data to overlap the last chunk
of the btrfs_file_extent_item, which means that we can possibly have a
btrfs_file_extent_item that isn't actually as large as a btrfs_file_extent_item.
This messes with us when we try to overwrite the extent when logging new extents
since we expect for it to be the right size.  To fix this just delete the item
and try to do the insert again which will give us the proper sized
btrfs_file_extent_item.  This fixes a panic where map_private_extent_buffer
would blow up because we're trying to write past the end of the leaf.  Thanks,

Cc: stable@vger.kernel.org
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-03-01 11:47:21 -05:00
Steven Noonan
45e27161c6 xenbus: fix compile failure on ARM with Xen enabled
Adding an include of linux/mm.h resolves this:
	drivers/xen/xenbus/xenbus_client.c: In function ‘xenbus_map_ring_valloc_hvm’:
	drivers/xen/xenbus/xenbus_client.c:532:66: error: implicit declaration of function ‘page_to_section’ [-Werror=implicit-function-declaration]

CC: stable@vger.kernel.org
Signed-off-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-03-01 10:55:00 -05:00
Konrad Rzeszutek Wilk
884ac2978a xen/pci: We don't do multiple MSI's.
There is no hypercall to setup multiple MSI per PCI device.
As such with these two new commits:
-  08261d87f7
   PCI/MSI: Enable multiple MSIs with pci_enable_msi_block_auto()
- 5ca72c4f7c
   AHCI: Support multiple MSIs

we would call the PHYSDEVOP_map_pirq 'nvec' times with the same
contents of the PCI device. Sander discovered that we would get
the same PIRQ value 'nvec' times and return said values to the
caller. That of course meant that the device was configured only
with one MSI and AHCI would fail with:

ahci 0000:00:11.0: version 3.0
xen: registering gsi 19 triggering 0 polarity 1
xen: --> pirq=19 -> irq=19 (gsi=19)
(XEN) [2013-02-27 19:43:07] IOAPIC[0]: Set PCI routing entry (6-19 -> 0x99 -> IRQ 19 Mode:1 Active:1)
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
ahci: probe of 0000:00:11.0 failed with error -22

That is b/c in ahci_host_activate the second call to
devm_request_threaded_irq  would return -EINVAL as we passed in
(on the second run) an IRQ that was never initialized.

CC: stable@vger.kernel.org
Reported-and-Tested-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-03-01 10:54:21 -05:00
David Sterba
83c8266acc btrfs: try harder to allocate raid56 stripe cache
The stripe hash table is large, starting with allocation order 4 and can go as
high as order 7 in case lock debugging is turned on and structure padding
happens.

Observed mount failure:

mount: page allocation failure: order:7, mode:0x200050
Pid: 8234, comm: mount Tainted: G        W    3.8.0-default+ #267
Call Trace:
 [<ffffffff81114353>] warn_alloc_failed+0xf3/0x140
 [<ffffffff811171d2>] ? __alloc_pages_direct_compact+0x92/0x250
 [<ffffffff81117ac3>] __alloc_pages_nodemask+0x733/0x9d0
 [<ffffffff81152878>] ? cache_alloc_refill+0x3f8/0x840
 [<ffffffff811528bc>] cache_alloc_refill+0x43c/0x840
 [<ffffffff811302eb>] ? is_kernel_percpu_address+0x4b/0x90
 [<ffffffffa00a00ac>] ? btrfs_alloc_stripe_hash_table+0x5c/0x130 [btrfs]
 [<ffffffff811531d7>] kmem_cache_alloc_trace+0x247/0x270
 [<ffffffffa00a00ac>] btrfs_alloc_stripe_hash_table+0x5c/0x130 [btrfs]
 [<ffffffffa003133f>] open_ctree+0xb2f/0x1f90 [btrfs]
 [<ffffffff81397289>] ? string+0x49/0xe0
 [<ffffffff813987b3>] ? vsnprintf+0x443/0x5d0
 [<ffffffffa0007cb6>] btrfs_mount+0x526/0x600 [btrfs]
 [<ffffffff8115127c>] ? cache_alloc_debugcheck_after+0x4c/0x200
 [<ffffffff81162b90>] mount_fs+0x20/0xe0
 [<ffffffff8117db26>] vfs_kern_mount+0x76/0x120
 [<ffffffff811801b6>] do_mount+0x386/0x980
 [<ffffffff8112a5cb>] ? strndup_user+0x5b/0x80
 [<ffffffff81180840>] sys_mount+0x90/0xe0
 [<ffffffff81962e99>] system_call_fastpath+0x16/0x1b

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-03-01 10:13:05 -05:00
Wang Shilong
88e081bf82 Btrfs: cleanup to make the function btrfs_delalloc_reserve_metadata more logic
The original code is a little confusing and not clear, The right
way to deal with the kernel code like this:
		[...]
		if (ret)
			goto out;
		[...]

So i move the common clean_up code to the place labeled with
out_fail, this will be easier to maintain.

Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-03-01 10:13:04 -05:00
Wang Shilong
a9870c0e03 Btrfs: don't call btrfs_qgroup_free if just btrfs_qgroup_reserve fails
commit eb6b88d92c leads into another bug.
If it is just because qgroup_reserve fails, the function btrfs_qgroup_free
should not be called, otherwise, it will cause the wrong quota accounting.

Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-03-01 10:13:04 -05:00
Wang Shilong
235fdb8ef2 Btrfs: remove reduplicate check about root in the function btrfs_clean_quota_tree
The check work has been done just before the function btrfs_clean_quota_tree
is called, it is not necessary to check it again, remove it.

Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-03-01 10:13:04 -05:00
Wang Shilong
84cbe2f725 Btrfs: return ENOMEM rather than use BUG_ON when btrfs_alloc_path fails
Return ENOMEM rather trigger BUG_ON, fix it.

Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com>
Reviewed-by: Miao Xie <miaox@cn.fujitsu.com>
Reviewed-by: Zach Brown <zab@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-03-01 10:13:04 -05:00
Wang Shilong
06b3a860dc Btrfs: fix missing deleted items in btrfs_clean_quota_tree
Steps to reproduce:

	i=0
	ncases=100

	mkfs.btrfs <disk>
	mount <disk> <mnt>
	btrfs quota enable <mnt>
	btrfs qgroup create 2/1 <mnt>
	while [ $i -le $ncases ]
	do
		btrfs qgroup create 1/$i <mnt>
		btrfs qgroup assign 1/$i 2/1 <mnt>
		i=$(($i+1))
	done

	btrfs quota disable <mnt>
	umount <mnt>
	btrfsck <mnt>

You can also use the commands:
	btrfs-debug-tree <disk> | grep QGROUP

You will find there are still items existed.The reasons why this happens
is because the original code just checks slots[0]==0 and returns.
We try to fix it by deleting the leaf one by one.

Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-03-01 10:13:03 -05:00
Marco Porsch
7cbf9d017d mac80211: fix oops on mesh PS broadcast forwarding
Introduced with de74a1d903
"mac80211: fix WPA with VLAN on AP side with ps-sta".
Apparently overwrites the sdata pointer with non-valid data in
the case of mesh.
Fix this by checking for IFTYPE_AP_VLAN.

Signed-off-by: Marco Porsch <marco@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-01 16:09:41 +01:00
Johannes Berg
645e77def9 nl80211: increase wiphy dump size dynamically
Given a device with many channels capabilities the wiphy
information can still overflow even though its size in
3.9 was reduced to 3.8 levels. For new userspace and
kernel 3.10 we're going to implement a new "split dump"
protocol that can use multiple messages per wiphy.

For now though, add a workaround to be able to send more
information to userspace. Since generic netlink doesn't
have a way to set the minimum dump size globally, and we
wouldn't really want to set it globally anyway, increase
the size only when needed, as described in the comments.
As userspace might not be prepared for large buffers, we
can only use 4k.

Also increase the size for the get_wiphy command.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-01 15:05:19 +01:00
Wei Yongjun
073093819d efivarfs: convert to use simple_open()
This removes an open coded simple_open() function and
replaces file operations references to the function
with simple_open() instead.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: Matthew Garret <mjg59@srcf.ucam.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-03-01 13:59:56 +00:00
Chen Gang
a72d9002f8 xen/xen-blkback: preq.dev is used without initialized
If call xen_vbd_translate failed, the preq.dev will be not initialized.
Use blkif->vbd.pdevice instead (still better to print relative info).

Note that before commit 01c681d4c7
(xen/blkback: Don't trust the handle from the frontend.)
the value bogus, as it was the guest provided value from req->u.rw.handle
rather than the actual device.

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Acked-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-03-01 08:41:43 -05:00
Andrew de los Reyes
8af6c08830 Revert "HID: Fix logitech-dj: missing Unifying device issue"
This reverts commit 596264082f.

The reverted commit was a workaround needed when drivers became unable
to communicate with devices during probe(). Now that such
communication is possible, the workaround is not needed.

Signed-off-by: Andrew de los Reyes <adlr@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-03-01 14:14:59 +01:00
Andrew de los Reyes
a9dd22b730 HID: logitech-dj: Allow incoming packets during probe().
Historically, logitech-dj communicated with the device during probe()
to query the list of devices attached. Later, a change was introduced
to hid-core that prevented incoming packets for a device during
probe(), as many drivers are unable to handle such input. That change
broke the device enumeration in logitech-dj, so commit
596264082f was introduced to workaround that by waiting for
normal input before enumerating devices.

Now that drivers can opt-in to receive input during probe, this patch
changes logitech-dj to do that, so that it can successfully complete
enumeration of devices during probe().

Signed-off-by: Andrew de los Reyes <adlr@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-03-01 14:14:35 +01:00
Andrew de los Reyes
c849a6143b HID: Separate struct hid_device's driver_lock into two locks.
This patch separates struct hid_device's driver_lock into two. The
goal is to allow hid device drivers to receive input during their
probe() or remove() function calls. This is necessary because some
drivers need to communicate with the device to determine parameters
needed during probe (e.g., size of a multi-touch surface), and if
possible, may perfer to communicate with a device on host-initiated
disconnect (e.g., to put it into a low-power state).

Historically, three functions used driver_lock:

- hid_device_probe: blocks to acquire lock
- hid_device_remove: blocks to acquire lock
- hid_input_report: if locked returns -EBUSY, else acquires lock

This patch adds another lock (driver_input_lock) which is used to
block input from occurring. The lock behavior is now:

- hid_device_probe: blocks to acq. driver_lock, then driver_input_lock
- hid_device_remove: blocks to acq. driver_lock, then driver_input_lock
- hid_input_report: if driver_input_lock locked returns -EBUSY, else
  acquires driver_input_lock

This patch also adds two helper functions to be called during probe()
or remove(): hid_device_io_start() and hid_device_io_stop(). These
functions lock and unlock, respectively, driver_input_lock; they also
make a note of whether they did so that hid-core knows if a driver has
changed the lock state.

This patch results in no behavior change for existing devices and
drivers. However, during a probe() or remove() function call in a
driver, that driver may now selectively call hid_device_io_start() to
let input events come through, then optionally call
hid_device_io_stop() to stop them.

Signed-off-by: Andrew de los Reyes <adlr@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-03-01 14:13:07 +01:00
Andrzej Hajda
fbe31057fa regulator: fixed regulator_bulk_enable unwinding code
Unwinding code disables all successfully enabled regulators.
Error is logged for every failed regulator.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-01 20:03:46 +08:00
Alessandro Rubini
41e9f3f71b watchdog: sp805_wdt depends on ARM
The SP805 driver is only used by the Spear machines, and uses
writel_relaxed, which is not available on all architectures.

The dependency from CONFIG_ARM avoids compilation problems under
randomconfig when CONFIG_ARM_AMBA is enabled for x86 builds.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com>
Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01 12:56:26 +01:00
Kumar, Anil
e20880e60f watchdog: davinci_wdt: update to devm_* API
Update the code to use devm_* API so that driver
core will manage resources.

Signed-off-by: Kumar, Anil <anilkumar.v@ti.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01 12:56:18 +01:00
Mrugesh Katepallewar
362ce5aeeb watchdog: davinci_wdt: use devm managed clk get
Get the clock using devm_clk_get().

Signed-off-by: Mrugesh Katepallewar <mrugesh.mk@ti.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01 12:56:14 +01:00
Joachim Eastwood
a6a1bcd370 watchdog: at91rm9200: add DT support
Add DT support for at91rm9200_wdt.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01 12:55:27 +01:00
Fabio Porcedda
c1fd5f6402 watchdog: add timeout-sec property binding
this patchset add the timeout-sec property to the following drivers:
orion_wdt, pnx4008_wdt, s3c2410_wdt and at91sam9_wdt.

The at91sam9_wdt is tested on evk-pr3,
the other drivers are compile tested only.

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Cc: Masanari Iida <standby24x7@gmail.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01 12:53:45 +01:00
Wenyou Yang
490ac7af8b watchdog: at91sam9_wdt: Convert to use the watchdog framework
According to Documentation/watchdog/convert_drivers_to_kernel_api.txt,
remove the file_operations struct, miscdevice, and obsolete includes

Since the at91sam watchdog inherent characteristics, add the watchdog
operations: at91wdt_start, at91wdt_stop and at91wdt_ping.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: linux-watchdog@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
2013-03-01 12:49:53 +01:00
Pali Rohár
2dd7b24467 watchdog: omap_wdt: Add option nowayout
Like other watchdog drivers, this patch adds new option nowayout
which overwrite WATCHDOG_NOWAYOUT.

Signed-off-by: Pali Rohar <pali.rohar@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01 12:49:02 +01:00
Fabio Porcedda
3048253ed9 watchdog: core: dt: add support for the timeout-sec dt property
Add support for watchdog drivers to initialize/set the timeout field
of the watchdog_device structure. The timeout field is initialised
either with the module timeout parameter value (if valid) or with the
timeout-sec dt property (if valid). If both are invalid the initial
value is unchanged.

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01 12:48:36 +01:00
Hauke Mehrtens
e3e83d0001 watchdog: bcm47xx_wdt.c: add hard timer
The more recent devices have a watchdog timer which could be configured
for over 2 hours and not just 2 seconds like the first generation
devices. For those devices do not use the extra software timer, but
directly program the time into the register. This will automatically be
used if the timer supports more than a minute.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01 12:47:31 +01:00
Hauke Mehrtens
93aed1f02a watchdog: bcm47xx_wdt.c: rename wdt_time to timeout
Rename wdt_time to timeout to name it like the other watchdog
driver do it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01 12:47:28 +01:00
Hauke Mehrtens
a39068929a watchdog: bcm47xx_wdt.c: rename ops methods
Rename the methods registered to struct watchdog_ops bcm47xx_wdt_ops in
order to add an other struct watchdog_ops using different ops in the
next patch.
Also rename WDT_MAX_TIME to WDT_SOFTTIMER_MAX.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01 12:47:19 +01:00
Hauke Mehrtens
f82dedf812 watchdog: bcm47xx_wdt.c: use platform device
Instead of accessing the function to set the watchdog timer directly,
register a platform driver the platform could register to use this
watchdog driver.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01 12:47:16 +01:00
Hauke Mehrtens
5434a04db9 watchdog: bcm47xx_wdt.c: convert to watchdog core api
Convert the bcm47xx_wdt.c driver to the new watchdog core api.

The nowayout parameter is now added unconditionally to the module.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01 12:47:13 +01:00
Guenter Roeck
52e5cc4efa watchdog: Convert BookE watchdog driver to watchdog infrastructure
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01 12:46:28 +01:00
Jingoo Han
04ecc7dc8e watchdog: s3c2410_wdt: Use devm_* functions
Use devm_* functions to make cleanup paths more simple.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01 12:45:34 +01:00
Wolfram Sang
e4504daba1 watchdog: remove old STMP3xxx driver
Now that the new driver is in place, we can remove the old one.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01 12:44:40 +01:00