Commit c2065d43ae ("ASoC: Intel: kbl_da7219_max98357a: remap jack
pins") maps kcontrols for Headphone and Headset Mic jacks for this
driver so that PulseAudio and PipeWire can handle jack detection events
for these peripherals.
The DA7219 codec used here can also distinguish between Headphone and
Line Out connections that go into the same physical port. Expose the
latter to userspace as a kcontrol as well and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-9-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit ecd77d494e ("ASoC: Intel: bytcr_wm5102: Add jack detect
support") maps kcontrols for Headphone and Headset Mic jacks for this
driver so that PulseAudio and PipeWire can handle jack detection events
for these peripherals.
The WM5102 codec used here can also distinguish between Headphone and
Line Out connections that go into the same physical port. Expose the
latter to userspace as a kcontrol as well and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-8-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit bbdd4ea219 ("ASoC: Intel: bxt_da7219_max98357a: remap jack
pins") maps kcontrols for Headphone and Headset Mic jacks for this
driver so that PulseAudio and PipeWire can handle detection events for
these peripherals.
The DA7219 codec used here can also distinguish between Headphone and
Line Out connections that go into the same physical port. Expose the
latter to userspace as a kcontrol as well and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-7-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The DA7219 codec used
here can detect Headphones, Headset Mic and Line Out connections. Expose
each to userspace as kcontrols and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-6-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5682, RT1015
and RT1015p codecs used here can detect Headphone and Headset Mic
connections. Expose the former two to userspace as kcontrols.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-5-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5682, RT5682s,
NAU8825 and NAU8821 codecs used here can detect Headphone and Headset
Mic connections. Expose both to userspace as kcontrols and add the
necessary widgets. Split the jack and pin structs per-codec to
accommodate for per-codec differences.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-4-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5645 codec used
here can detect Headphone and Headset Mic connections. Expose both to
userspace as kcontrols.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-3-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The DA7219 codec used
here can detect Headphones, Headset Mic and Line Out connections. Expose
each to userspace as kcontrols and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-2-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In stress cases involving module insertion/removal followed by
playback/capture, it can happen that capture/playback is started
before the codec enumeration completes.
The codec driver registers its components with the ASoC framework
during the probe stage, so there is currently no way for the card
creation to wait for the codec enumeration/initialization to complete.
In addition, when the capture/playback starts, the ASoC framework uses
pm_runtime_get_sync() to properly refcount and power-manage
devices. This is problematic in the SoundWire case because pm_runtime
is enabled during the enumeration/initialization stage, so
pm_runtime_get_sync() will return -EACCESS which is
ignored. Additional errors will happen when setting the pm_runtime
status as 'active' because the parent is not properly resumed,
resulting in an error such as:
"rt711 sdw:0:025d:0711:00: runtime PM trying to activate child device
sdw:0:025d:0711:00 but parent (sdw-master-0) is not active"
This patch suggests enabling pm_runtime during the probe, but marking
the device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
Closes: https://github.com/thesofproject/linux/issues/4328
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update binding for yaml and remove the old related txt bindings. Note that
we are also adding the undocumented pinctrl-single,slew-rate property. And
we only use the first example from the old binding.
As we are mostly using a generic compatible across various SoCs, let's not
start adding matches for random pin group node naming. Let's standardize on
pin group node name ending in -pins with an optional instance number
suffix.
As a pin group may have additional pins added to it later on, let's always
use -pins rather than -pin for the gropu name.
Most of the dts files have been updated already for the pin group node
names with a few changes still pending.
Cc: Nishanth Menon <nm@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230721082654.27036-1-tony@atomide.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In stress cases involving module insertion/removal followed by
playback/capture, it can happen that capture/playback is started
before the codec enumeration completes.
The codec driver registers its components with the ASoC framework
during the probe stage, so there is currently no way for the card
creation to wait for the codec enumeration/initialization to complete.
In addition, when the capture/playback starts, the ASoC framework uses
pm_runtime_get_sync() to properly refcount and power-manage
devices. This is problematic in the SoundWire case because pm_runtime
is enabled during the enumeration/initialization stage, so
pm_runtime_get_sync() will return -EACCESS which is
ignored. Additional errors will happen when setting the pm_runtime
status as 'active' because the parent is not properly resumed,
resulting in an error such as:
"rt711 sdw:0:025d:0711:00: runtime PM trying to activate child device
sdw:0:025d:0711:00 but parent (sdw-master-0) is not active"
This patch suggests enabling pm_runtime during the probe, but marking
the device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
Closes: https://github.com/thesofproject/linux/issues/4328
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The RT5682 needs specific attention: there are two regmap in
rt5682_priv struct, one is sdw_regmap which is for IO transfer, and
the other is used for registers control.
We need to set both regmaps when we set cache only. Because if we set
rt5682->sdw_regmap only, rt5682->regmap won't set/get the right value
when it call regmap_write/read(rt5682->sdw_regmap, ...). If we set
rt5682->regmap only, regmap_write(rt5682->sdw_regmap, ...) is used
in rt5682_clock_config which will be called by the ..bus_config ops.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SoundWire bus may start after the probe where the SoundWire ASoC
components are registered. This creates a time window where the card
can be created and the registers be accessed.
As discussed on the mailing list, we can't really control when codecs
are enumerated and initialized, but we can make sure the access to the
codecs is cached until the hardware is accessible.
This patch configures regcache_cache_only() with a 'true' parameter in
the probe function, and a 'false' parameter in the io_init routine.
The rt5682 is handled through a different patch due to its specific
cache handling.
Link: https://lore.kernel.org/alsa-devel/20230503144102.242240-1-krzysztof.kozlowski@linaro.org/
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason the first batch of SoundWire codec drivers squelch
errors in the SoundWire probe callback.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove kernel-doc warnings:
drivers/iommu/iommu.c:3261: warning: Function parameter or member 'group'
not described in 'iommu_group_release_dma_owner'
drivers/iommu/iommu.c:3261: warning: Excess function parameter 'dev'
description in 'iommu_group_release_dma_owner'
drivers/iommu/iommu.c:3275: warning: Function parameter or member 'dev'
not described in 'iommu_device_release_dma_owner'
drivers/iommu/iommu.c:3275: warning: Excess function parameter 'group'
description in 'iommu_device_release_dma_owner'
Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Fixes: 89395ccedb ("iommu: Add device-centric DMA ownership interfaces")
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230731112758.214775-1-wangzhu9@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
IPMMU hardware on R-Car Gen3 and RZ/G2 is simple. Each bus-master
device like eMMC host and PCIe controllers has a micro-TLB of
The IPMMU, and after enabled it, all transactions of the device are
under the IPMMU.
eMMC host ---(micro-TLB of eMMC)--- IPMMU cache --- IPMMU main
PCIe --------(micro-TLB of PCIe)--- IPMMU cache --- IPMMU main
Now this IPMMU driver allows eMMC host, and it is safe to use
the IPMMU. So, we can assume that it is safe to use the IPMMU
from PCIe devices too, because all PCIe devices transactions will
go to the micro-TLB of PCIe. So, add a new condition whether
the device is a PCIe device or not in the ipmmu_device_is_allowed()
which will be called if the PCIe host controller has iommu-map
property.
This can improve CPU load because the PCIe controllers only have
a capability for lower 32-bit memory area so that this can avoid
using swiotlb.
Note that IPMMU on R-Car Gen4 is different than R-Car Gen3 and
RZ/G2's one, especially OS-ID. But, for now, the IPMMU driver
takes care of OS-ID 0 only. In other words, all PCIe devices will
go to the micro-TLB of PCIe.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230728014659.411751-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
force_aperture was intended to false only by GART drivers that have an
identity translation outside the aperture. This does not describe sprd, so
add the missing 'force_aperture = true'.
Fixes: b23e4fc4e3 ("iommu: add Unisoc IOMMU basic driver")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This patch fixes the following sparse warning:
drivers/iommu/apple-dart.c:1279:1: sparse: warning: symbol 'apple_dart_pm_ops' was not declared. Should it be static?
No functional change intended.
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Acked-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20230720232155.3923-1-minhuadotchen@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
We add the prefix "mediatek," for the lastest ports header file name,
For example, include/dt-bindings/memory/mediatek,mt8188-memory-port.h.
Add a new entry for this.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230602090227.7264-8-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add iova_region_larb_msk for mt8188. We separate the 16GB iova regions
by each device's larbid/portid.
Refer to include/dt-bindings/memory/mediatek,mt8188-memory-port.h
As commented in the code, larb19(21) means it's larb19 while its SW index
is 21.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230602090227.7264-7-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
MT8188 has 3 IOMMU, containing 2 MM IOMMUs, one is for vdo, the other
is for vpp. and 1 INFRA IOMMU.
Signed-off-by: Chengci.Xu <chengci.xu@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230602090227.7264-6-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Prepare for MT8188. In MT8188, the register which enables IOMMU for
INFRA masters are in the secure world for security concerns, therefore we
add a SMC command for INFRA masters to enable IOMMU in ATF.
Signed-off-by: Chengci.Xu <chengci.xu@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230602090227.7264-5-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If there are many ports in a infra master, current flow will update
the INFRA register many times. This patch saves all ports to portid_msk
in the front of mtk_iommu_config(), then update only once for the IOMMU
configure. After this, we could avoid send too many SMC calls to ATF in
MT8188.
Prepare for MT8188, also reduce the indention without functional change.
Signed-off-by: Chengci.Xu <chengci.xu@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230602090227.7264-4-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Prepare for mt8188 to fix a two IOMMU HWs share pagetable issue.
We have two MM IOMMU HWs in mt8188, one is VPP-IOMMU, the other is
VDO-IOMMU. The 2 MM IOMMU HWs share pagetable don't work in this case:
a) VPP-IOMMU probe firstly.
b) VDO-IOMMU probe.
c) The master for VDO-IOMMU probe (means frstdata is vpp-iommu).
d) The master in another domain probe. No matter it is vdo or vpp.
Then it still create a new pagetable in step d). The problem is
"frstdata->bank[0]->m4u_dom" was not initialized. Then when d) enter, it
still create a new one.
In this patch, we create a new variable "share_dom" for this share
pgtable case, it should be helpful for readable. and put all the share
pgtable logic in the mtk_iommu_domain_finalise.
In mt8195, the master of VPP-IOMMU probes before than VDO-IOMMU
from its dtsi node sequence, we don't see this issue in it. Prepare for
mt8188.
Fixes: 645b87c190 ("iommu/mediatek: Fix 2 HW sharing pgtable issue")
Signed-off-by: Chengci.Xu <chengci.xu@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230602090227.7264-3-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add descriptions for mt8188 IOMMU which also use ARM Short-Descriptor
translation table format.
In mt8188, there are two smi-common HW and IOMMU, one is for vdo(video
output), the other is for vpp(video processing pipe). They connects
with different smi-larbs, then some setting(larbid_remap) is different.
Differentiate them with the compatible string.
Something like this:
IOMMU(VDO) IOMMU(VPP)
| |
SMI_COMMON_VDO SMI_COMMON_VPP
--------------- ----------------
| | ... | | ...
larb0 larb2 ... larb1 larb3 ...
We also have an IOMMU that is for infra master like PCIe.
And infra master don't have the larb and ports.
Signed-off-by: Chengci.Xu <chengci.xu@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230602090227.7264-2-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
There are some warnings reported by coccinelle:
./drivers/platform/x86/hp/hp-bioscfg/spmobj-attributes.c:317:35-42:
WARNING opportunity for kmemdup
./drivers/platform/x86/hp/hp-bioscfg/spmobj-attributes.c:270:40-47:
WARNING opportunity for kmemdup
./drivers/platform/x86/hp/hp-bioscfg/spmobj-attributes.c:233:36-43:
WARNING opportunity for kmemdup
Use kmemdup rather than duplicating its implementation.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://lore.kernel.org/r/20230803032027.3044851-1-lizetao1@huawei.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Update steps how password encoding size is evaluated
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://lore.kernel.org/r/20230731203141.30044-8-jorge.lopez2@hp.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Updates steps how enum possible values size is evaluated
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://lore.kernel.org/r/20230731203141.30044-7-jorge.lopez2@hp.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Update steps taken to evaluate prerequisites size value
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://lore.kernel.org/r/20230731203141.30044-5-jorge.lopez2@hp.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Replace the word 'HACK' with 'step' from source code
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://lore.kernel.org/r/20230731203141.30044-4-jorge.lopez2@hp.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Address memory leaks while handling elements in packages.
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://lore.kernel.org/r/20230731203141.30044-2-jorge.lopez2@hp.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add an introduction about HID meant for the casual programmer
that is trying either to fix his device or to understand
what is going wrong.
Signed-off-by: Marco Morandini <marco.morandini@polimi.it>
Co-authored-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>