Commit graph

1,215,304 commits

Author SHA1 Message Date
Paolo Bonzini
63dbc67cf4 KVM: SEV: remove ghcb variable declarations
To avoid possible time-of-check/time-of-use issues, the GHCB should
almost never be accessed outside dump_ghcb, sev_es_sync_to_ghcb
and sev_es_sync_from_ghcb.  The only legitimate uses are to set the
exitinfo fields and to find the address of the scratch area embedded
in the ghcb.  Accessing ghcb_usage also goes through svm->sev_es.ghcb
in sev_es_validate_vmgexit(), but that is because anyway the value is
not used.

Removing a shortcut variable that contains the value of svm->sev_es.ghcb
makes these cases a bit more verbose, but it limits the chance of someone
reading the ghcb by mistake.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-08-04 13:33:07 -04:00
Paolo Bonzini
7588dbcebc KVM: SEV: only access GHCB fields once
A KVM guest using SEV-ES or SEV-SNP with multiple vCPUs can trigger
a double fetch race condition vulnerability and invoke the VMGEXIT
handler recursively.

sev_handle_vmgexit() maps the GHCB page using kvm_vcpu_map() and then
fetches the exit code using ghcb_get_sw_exit_code().  Soon after,
sev_es_validate_vmgexit() fetches the exit code again. Since the GHCB
page is shared with the guest, the guest is able to quickly swap the
values with another vCPU and hence bypass the validation. One vmexit code
that can be rejected by sev_es_validate_vmgexit() is SVM_EXIT_VMGEXIT;
if sev_handle_vmgexit() observes it in the second fetch, the call
to svm_invoke_exit_handler() will invoke sev_handle_vmgexit() again
recursively.

To avoid the race, always fetch the GHCB data from the places where
sev_es_sync_from_ghcb stores it.

Exploiting recursions on linux kernel has been proven feasible
in the past, but the impact is mitigated by stack guard pages
(CONFIG_VMAP_STACK).  Still, if an attacker manages to call the handler
multiple times, they can theoretically trigger a stack overflow and
cause a denial-of-service, or potentially guest-to-host escape in kernel
configurations without stack guard pages.

Note that winning the race reliably in every iteration is very tricky
due to the very tight window of the fetches; depending on the compiler
settings, they are often consecutive because of optimization and inlining.

Tested by booting an SEV-ES RHEL9 guest.

Fixes: CVE-2023-4155
Fixes: 291bd20d5d ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT")
Cc: stable@vger.kernel.org
Reported-by: Andy Nguyen <theflow@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-08-04 13:33:06 -04:00
Paolo Bonzini
4e15a0ddc3 KVM: SEV: snapshot the GHCB before accessing it
Validation of the GHCB is susceptible to time-of-check/time-of-use vulnerabilities.
To avoid them, we would like to always snapshot the fields that are read in
sev_es_validate_vmgexit(), and not use the GHCB anymore after it returns.

This means:

- invoking sev_es_sync_from_ghcb() before any GHCB access, including before
  sev_es_validate_vmgexit()

- snapshotting all fields including the valid bitmap and the sw_scratch field,
  which are currently not caching anywhere.

The valid bitmap is the first thing to be copied out of the GHCB; then,
further accesses will use the copy in svm->sev_es.

Fixes: 291bd20d5d ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-08-04 13:33:06 -04:00
Alexandre Ghiti
c3bcc65d4d
riscv: Start of DRAM should at least be aligned on PMD size for the direct mapping
So that we do not end up mapping the whole linear mapping using 4K
pages, which is slow at boot time, and also very likely at runtime.

So make sure we align the start of DRAM on a PMD boundary.

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reported-by: Song Shuai <suagrfillet@gmail.com>
Fixes: 3335068f87 ("riscv: Use PUD/P4D/PGD pages for the linear mapping")
Tested-by: Song Shuai <suagrfillet@gmail.com>
Link: https://lore.kernel.org/r/20230704121837.248976-1-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-08-04 10:28:04 -07:00
Palmer Dabbelt
f8069826eb
Merge patch series "RISC-V: Fix a few kexec_file_load(2) failures"
Petr Tesarik <petrtesarik@huaweicloud.com> says:

From: Petr Tesarik <petr.tesarik.ext@huawei.com>

The kexec_file_load(2) syscall does not work at least in some kernel
builds. For details see the relevant section in this blog post:

https://sigillatum.tesarici.cz/2023-07-21-state-of-riscv64-kdump.html

This patch series handles an additional relocation types, removes the need
to implement a Global Offset Table (GOT) for the purgatory and fixes the
placement of initrd.

* b4-shazam-merge:
  riscv/kexec: load initrd high in available memory
  riscv/kexec: handle R_RISCV_CALL_PLT relocation type

Link: https://lore.kernel.org/r/cover.1690365011.git.petr.tesarik.ext@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-08-04 10:28:03 -07:00
Torsten Duwe
49af7a2cd5
riscv/kexec: load initrd high in available memory
When initrd is loaded low, the secondary kernel fails like this:

 INITRD: 0xdc581000+0x00eef000 overlaps in-use memory region

This initrd load address corresponds to the _end symbol, but the
reservation is aligned on PMD_SIZE, as explained by a comment in
setup_bootmem().

It is technically possible to align the initrd load address accordingly,
leaving a hole between the end of kernel and the initrd, but it is much
simpler to allocate the initrd top-down.

Fixes: 838b3e2848 ("RISC-V: Load purgatory in kexec_file")
Signed-off-by: Torsten Duwe <duwe@suse.de>
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Cc: stable@vger.kernel.org
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/all/67c8eb9eea25717c2c8208d9bfbfaa39e6e2a1c6.1690365011.git.petr.tesarik.ext@huawei.com/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-08-04 10:27:44 -07:00
Torsten Duwe
d0b4f95a51
riscv/kexec: handle R_RISCV_CALL_PLT relocation type
R_RISCV_CALL has been deprecated and replaced by R_RISCV_CALL_PLT. See Enum
18-19 in Table 3. Relocation types here:

https://github.com/riscv-non-isa/riscv-elf-psabi-doc/blob/master/riscv-elf.adoc

It was deprecated in ("Deprecated R_RISCV_CALL, prefer R_RISCV_CALL_PLT"):

a0dced8501

Recent tools (at least GNU binutils-2.40) already use R_RISCV_CALL_PLT.
Kernels built with such binutils fail kexec_load_file(2) with:

 kexec_image: Unknown rela relocation: 19
 kexec_image: Error loading purgatory ret=-8

The binary code at the call site remains the same, so tell
arch_kexec_apply_relocations_add() to handle _PLT alike.

Fixes: 838b3e2848 ("RISC-V: Load purgatory in kexec_file")
Signed-off-by: Torsten Duwe <duwe@suse.de>
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Cc: Li Zhengyu <lizhengyu3@huawei.com>
Cc: stable@vger.kernel.org
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/all/b046b164af8efd33bbdb7d4003273bdf9196a5b0.1690365011.git.petr.tesarik.ext@huawei.com/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-08-04 10:27:11 -07:00
Kui-Feng Lee
9eab71bd88 selftests/bpf: fix the incorrect verification of port numbers.
Check port numbers before calling htons().

According to Dan Carpenter's report, Smatch identified incorrect port
number checks. It is expected that the returned port number is an integer,
with negative numbers indicating errors. However, the value was mistakenly
verified after being translated by htons().

Major changes from v1:

 - Move the variable 'port' to the same line of 'err'.

Fixes: 539c7e67aa ("selftests/bpf: Verify that the cgroup_skb filters receive expected packets.")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/bpf/cafd6585-d5a2-4096-b94f-7556f5aa7737@moroto.mountain/
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20230804165831.173627-1-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-08-04 10:20:33 -07:00
Arınç ÜNAL
2900083269 ARM: dts: BCM5301X: Add DT for ASUS RT-AC3100
ASUS RT-AC3100 is ASUS RT-AC88U without the external switch. Move the
shared bindings to bcm47094-asus-rt-ac3100.dtsi.

Remove the fixed-link node on port@7 as commit ba4aebce23 ("ARM: dts:
BCM5301X: Describe switch ports in the main DTS") states it's not
necessary.

Replace the copyright notice with an author notice.

Rename the model name from Asus to ASUS on bcm47094-asus-rt-ac88u.dts.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230803071454.5902-2-arinc.unal@arinc9.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2023-08-04 10:08:49 -07:00
Arınç ÜNAL
d90d0fa916 dt-bindings: arm: bcm: add bindings for ASUS RT-AC3100
Add ASUS RT-AC3100 under BCM47094 based boards.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230803071454.5902-1-arinc.unal@arinc9.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2023-08-04 10:08:38 -07:00
Li Zetao
a24c8b5111 fs/Kconfig: Fix compile error for romfs
There are some compile errors reported by kernel test robot:

arm-linux-gnueabi-ld: fs/romfs/storage.o: in function `romfs_dev_read':
storage.c:(.text+0x64): undefined reference to `__brelse'
arm-linux-gnueabi-ld: storage.c:(.text+0x9c): undefined reference to `__bread_gfp'
arm-linux-gnueabi-ld: fs/romfs/storage.o: in function `romfs_dev_strnlen':
storage.c:(.text+0x128): undefined reference to `__brelse'
arm-linux-gnueabi-ld: storage.c:(.text+0x16c): undefined reference to `__bread_gfp'
arm-linux-gnueabi-ld: fs/romfs/storage.o: in function `romfs_dev_strcmp':
storage.c:(.text+0x22c): undefined reference to `__bread_gfp'
arm-linux-gnueabi-ld: storage.c:(.text+0x27c): undefined reference to `__brelse'
arm-linux-gnueabi-ld: storage.c:(.text+0x2a8): undefined reference to `__bread_gfp'
arm-linux-gnueabi-ld: storage.c:(.text+0x2bc): undefined reference to `__brelse'
arm-linux-gnueabi-ld: storage.c:(.text+0x2d4): undefined reference to `__brelse'
arm-linux-gnueabi-ld: storage.c:(.text+0x2f4): undefined reference to `__brelse'
arm-linux-gnueabi-ld: storage.c:(.text+0x304): undefined reference to `__brelse'

The reason for the problem is that the commit
"925c86a19b" ("fs: add CONFIG_BUFFER_HEAD") has added a new config
"CONFIG_BUFFER_HEAD" that controls building the buffer_head code, and
romfs needs to use the buffer_head API, but no corresponding config has
beed added. Select the config "CONFIG_BUFFER_HEAD" in romfs Kconfig to
resolve the problem.

Fixes: 925c86a19b ("fs: add CONFIG_BUFFER_HEAD")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308031810.pQzGmR1v-lkp@intel.com/
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Tested-by: Li Zetao <lizetao1@huawei.com>
Signed-off-by: Li Zetao <lizetao1@huawei.com>
[axboe: fold in Christoph's incremental]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-08-04 11:04:05 -06:00
Enlin Mu
fe8c3623ab pstore/ram: Check start of empty przs during init
After commit 30696378f6 ("pstore/ram: Do not treat empty buffers as
valid"), initialization would assume a prz was valid after seeing that
the buffer_size is zero (regardless of the buffer start position). This
unchecked start value means it could be outside the bounds of the buffer,
leading to future access panics when written to:

 sysdump_panic_event+0x3b4/0x5b8
 atomic_notifier_call_chain+0x54/0x90
 panic+0x1c8/0x42c
 die+0x29c/0x2a8
 die_kernel_fault+0x68/0x78
 __do_kernel_fault+0x1c4/0x1e0
 do_bad_area+0x40/0x100
 do_translation_fault+0x68/0x80
 do_mem_abort+0x68/0xf8
 el1_da+0x1c/0xc0
 __raw_writeb+0x38/0x174
 __memcpy_toio+0x40/0xac
 persistent_ram_update+0x44/0x12c
 persistent_ram_write+0x1a8/0x1b8
 ramoops_pstore_write+0x198/0x1e8
 pstore_console_write+0x94/0xe0
 ...

To avoid this, also check if the prz start is 0 during the initialization
phase. If not, the next prz sanity check case will discover it (start >
size) and zap the buffer back to a sane state.

Fixes: 30696378f6 ("pstore/ram: Do not treat empty buffers as valid")
Cc: Yunlong Xing <yunlong.xing@unisoc.com>
Cc: stable@vger.kernel.org
Signed-off-by: Enlin Mu <enlin.mu@unisoc.com>
Link: https://lore.kernel.org/r/20230801060432.1307717-1-yunlong.xing@unisoc.com
[kees: update commit log with backtrace and clarifications]
Signed-off-by: Kees Cook <keescook@chromium.org>
2023-08-04 10:03:20 -07:00
Javier Martinez Canillas
a5ae331edb
drm: Drop select FRAMEBUFFER_CONSOLE for DRM_FBDEV_EMULATION
The commit c242f48433 ("drm: Make FB_CORE to be selected if DRM fbdev
emulation is enabled") changed DRM_FBDEV_EMULATION from 'depends on FB'
to an effective 'select FB_CORE', so any config that previously had DRM=y
and FB=n now has FB_CORE=y and FRAMEBUFFER_CONSOLE=y.

This leads to unmet direct dependencies detected for FRAMEBUFFER_CONSOLE
as reported by Arthur Grillo, e.g:

WARNING: unmet direct dependencies detected for FRAMEBUFFER_CONSOLE
  Depends on [n]: VT [=n] && FB_CORE [=y] && !UML [=y]
  Selected by [y]:
  - DRM_FBDEV_EMULATION [=y] && HAS_IOMEM [=y] && DRM [=y] && !EXPERT [=n]

Arnd Bergmann suggests to drop the select FRAMEBUFFER_CONSOLE for the
DRM_FBDEV_EMULATION Kconfig symbol, since a possible use case could
be to enable DRM fbdev emulation but without a framebuffer console.

Fixes: c242f48433 ("drm: Make FB_CORE to be selected if DRM fbdev emulation is enabled")
Reported-by: Arthur Grillo <arthurgrillo@riseup.net>
Closes: https://lore.kernel.org/dri-devel/20230726220325.278976-1-arthurgrillo@riseup.net
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Arthur Grillo <arthurgrillo@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804125156.1387542-1-javierm@redhat.com
2023-08-04 18:49:15 +02:00
Mark Brown
672dbf97f6 kselftest/arm64: Use the tools/include compiler.h rather than our own
The BTI test program started life as standalone programs outside the
kselftest suite so provided it's own compiler.h. Now that we have updated
the tools/include compiler.h to have all the definitions that we are using
and the arm64 selftsets pull in tools/includes let's drop our custom
version.

__unreachable() is named unreachable() there requiring an update in the
code.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230728-arm64-signal-memcpy-fix-v4-6-0c1290db5d46@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
2023-08-04 17:36:52 +01:00
Mark Brown
db7a89f706 kselftest/arm64: Use shared OPTIMZER_HIDE_VAR() definiton
We had open coded the definition of OPTIMIZER_HIDE_VAR() as a fix but now
that we have the generic tools/include available and that has had a
definition of OPTIMIZER_HIDE_VAR() we can switch to the define.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230728-arm64-signal-memcpy-fix-v4-5-0c1290db5d46@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
2023-08-04 17:36:52 +01:00
Mark Brown
35d7bc983a kselftest/arm64: Make the tools/include headers available
Make the generic tools/include headers available to the arm64 selftests so
we can reduce some duplication.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230728-arm64-signal-memcpy-fix-v4-4-0c1290db5d46@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
2023-08-04 17:36:52 +01:00
Mark Brown
51e6ac1fa4 tools include: Add some common function attributes
We don't have definitions of __always_unused or __noreturn in the tools
version of compiler.h, add them so we can use them in kselftests.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230728-arm64-signal-memcpy-fix-v4-3-0c1290db5d46@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
2023-08-04 17:36:52 +01:00
Mark Brown
e5d51a6650 tools compiler.h: Add OPTIMIZER_HIDE_VAR()
Port over the definition of OPTIMIZER_HIDE_VAR() so we can use it in
kselftests.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230728-arm64-signal-memcpy-fix-v4-2-0c1290db5d46@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
2023-08-04 17:36:52 +01:00
Mark Brown
d6da04b6fb kselftest/arm64: Exit streaming mode after collecting signal context
When we collect a signal context with one of the SME modes enabled we will
have enabled that mode behind the compiler and libc's back so they may
issue some instructions not valid in streaming mode, causing spurious
failures.

For the code prior to issuing the BRK to trigger signal handling we need to
stay in streaming mode if we were already there since that's a part of the
signal context the caller is trying to collect. Unfortunately this code
includes a memset() which is likely to be heavily optimised and is likely
to use FP instructions incompatible with streaming mode. We can avoid this
happening by open coding the memset(), inserting a volatile assembly
statement to avoid the compiler recognising what's being done and doing
something in optimisation. This code is not performance critical so the
inefficiency should not be an issue.

After collecting the context we can simply exit streaming mode, avoiding
these issues. Use a full SMSTOP for safety to prevent any issues appearing
with ZA.

Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230728-arm64-signal-memcpy-fix-v4-1-0c1290db5d46@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
2023-08-04 17:36:52 +01:00
Daniel Borkmann
21ce6abe17 selftests/bpf: Add test for detachment on empty mprog entry
Add a detachment test case with miniq present to assert that with and
without the miniq we get the same error.

  # ./test_progs -t tc_opts
  #244     tc_opts_after:OK
  #245     tc_opts_append:OK
  #246     tc_opts_basic:OK
  #247     tc_opts_before:OK
  #248     tc_opts_chain_classic:OK
  #249     tc_opts_delete_empty:OK
  #250     tc_opts_demixed:OK
  #251     tc_opts_detach:OK
  #252     tc_opts_detach_after:OK
  #253     tc_opts_detach_before:OK
  #254     tc_opts_dev_cleanup:OK
  #255     tc_opts_invalid:OK
  #256     tc_opts_mixed:OK
  #257     tc_opts_prepend:OK
  #258     tc_opts_replace:OK
  #259     tc_opts_revision:OK
  Summary: 16/0 PASSED, 0 SKIPPED, 0 FAILED

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20230804131112.11012-2-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-08-04 09:35:39 -07:00
Daniel Borkmann
d210f9735e bpf: Fix mprog detachment for empty mprog entry
syzbot reported an UBSAN array-index-out-of-bounds access in bpf_mprog_read()
upon bpf_mprog_detach(). While it did not have a reproducer, I was able to
manually reproduce through an empty mprog entry which just has miniq present.

The latter is important given otherwise we get an ENOENT error as tcx detaches
the whole mprog entry. The index 4294967295 was triggered via NULL dtuple.prog
which then attempts to detach from the back. bpf_mprog_fetch() in this case
did hit the idx == total and therefore tried to grab the entry at idx -1.

Fix it by adding an explicit bpf_mprog_total() check in bpf_mprog_detach() and
bail out early with ENOENT.

Fixes: 053c8e1f23 ("bpf: Add generic attach/detach/query API for multi-progs")
Reported-by: syzbot+0c06ba0f831fe07a8f27@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20230804131112.11012-1-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-08-04 09:35:39 -07:00
D Scott Phillips
5cd474e573 arm64: sdei: abort running SDEI handlers during crash
Interrupts are blocked in SDEI context, per the SDEI spec: "The client
interrupts cannot preempt the event handler." If we crashed in the SDEI
handler-running context (as with ACPI's AGDI) then we need to clean up the
SDEI state before proceeding to the crash kernel so that the crash kernel
can have working interrupts.

Track the active SDEI handler per-cpu so that we can COMPLETE_AND_RESUME
the handler, discarding the interrupted context.

Fixes: f5df269618 ("arm64: kernel: Add arch-specific SDEI entry code and CPU masking")
Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com>
Cc: stable@vger.kernel.org
Reviewed-by: James Morse <james.morse@arm.com>
Tested-by: Mihai Carabas <mihai.carabas@oracle.com>
Link: https://lore.kernel.org/r/20230627002939.2758-1-scott@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
2023-08-04 17:35:33 +01:00
Zeng Heng
d1890517ac kselftest/arm64: add RCpc load-acquire to hwcap test
Add the RCpc and various features check in the set of hwcap tests.

Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230803133905.971697-1-zengheng4@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
2023-08-04 17:33:38 +01:00
Joey Gouly
d70175b147 selftests/arm64: add HWCAP2_HBC test
Add a test for the newly added HWCAP2_HBC.

Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230804143746.3900803-3-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
2023-08-04 17:32:13 +01:00
Joey Gouly
7f86d128e4 arm64: add HWCAP for FEAT_HBC (hinted conditional branches)
Add a HWCAP for FEAT_HBC, so that userspace can make a decision on using
this feature.

Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230804143746.3900803-2-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
2023-08-04 17:32:13 +01:00
Anshuman Khandual
90d6867722 perf: pmuv3: Remove comments from armv8pmu_[enable|disable]_event()
The comments in armv8pmu_[enable|disable]_event() are blindingly obvious,
and does not contribute in making things any better. Let's drop them off.
Functional change is not intended.

Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20230802090853.1190391-1-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
2023-08-04 17:23:57 +01:00
Zhang Jianhua
4e0bacd65e arm64: fix build warning for ARM64_MEMSTART_SHIFT
When building with W=1, the following warning occurs.

arch/arm64/include/asm/kernel-pgtable.h:129:41: error: "PUD_SHIFT" is not defined, evaluates to 0 [-Werror=undef]
  129 | #define ARM64_MEMSTART_SHIFT            PUD_SHIFT
      |                                         ^~~~~~~~~
arch/arm64/include/asm/kernel-pgtable.h:142:5: note: in expansion of macro ‘ARM64_MEMSTART_SHIFT’
  142 | #if ARM64_MEMSTART_SHIFT < SECTION_SIZE_BITS
      |     ^~~~~~~~~~~~~~~~~~~~

The generic PUD_SHIFT was defined in include/asm-generic/pgtable-nopud.h,
however the #ifndef __ASSEMBLY__ guard in this header file makes it unavailable
for assembly files. While someone .S file include the <asm/kernel-pgtable.h>,
the build warning would occur. Now move the macro ARM64_MEMSTART_SHIFT and
ARM64_MEMSTART_ALIGN to arch/arm64/mm/init.c where it is used only, to avoid
this issue.

Signed-off-by: Zhang Jianhua <chris.zjh@huawei.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20230804075615.3334756-1-chris.zjh@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
2023-08-04 17:19:44 +01:00
Mateusz Guzik
ed192c59f8 file: mostly eliminate spurious relocking in __range_close
Stock code takes a lock trip for every fd in range, but this can be
trivially avoided and real-world consumers do have plenty of already
closed cases.

Just booting Debian 12 with a debug printk shows:
(sh) min 3 max 17 closed 15 empty 0
(sh) min 19 max 63 closed 31 empty 14
(sh) min 4 max 63 closed 0 empty 60
(spawn) min 3 max 63 closed 13 empty 48
(spawn) min 3 max 63 closed 13 empty 48
(mount) min 3 max 17 closed 15 empty 0
(mount) min 19 max 63 closed 32 empty 13

and so on.

While here use more idiomatic naming.

An avoidable relock is left in place to avoid uglifying the code.
The code was not switched to bitmap traversal for the same reason.

Tested with ltp kernel/syscalls/close_range

Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Message-Id: <20230727113809.800067-1-mjguzik@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-04 17:57:56 +02:00
Luca Weiss
df04d166d1 clk: qcom: gcc-sm6350: Fix gcc_sdcc2_apps_clk_src
GPLL7 is not on by default, which causes a "gcc_sdcc2_apps_clk_src: rcg
didn't update its configuration" error when booting. Set .flags =
CLK_OPS_PARENT_ENABLE to fix the error.

Fixes: 131abae905 ("clk: qcom: Add SM6350 GCC driver")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230804-sm6350-sdcc2-v1-1-3d946927d37d@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-04 08:54:29 -07:00
Benjamin Coddington
3b816601e2 nfsd: Fix race to FREE_STATEID and cl_revoked
We have some reports of linux NFS clients that cannot satisfy a linux knfsd
server that always sets SEQ4_STATUS_RECALLABLE_STATE_REVOKED even though
those clients repeatedly walk all their known state using TEST_STATEID and
receive NFS4_OK for all.

Its possible for revoke_delegation() to set NFS4_REVOKED_DELEG_STID, then
nfsd4_free_stateid() finds the delegation and returns NFS4_OK to
FREE_STATEID.  Afterward, revoke_delegation() moves the same delegation to
cl_revoked.  This would produce the observed client/server effect.

Fix this by ensuring that the setting of sc_type to NFS4_REVOKED_DELEG_STID
and move to cl_revoked happens within the same cl_lock.  This will allow
nfsd4_free_stateid() to properly remove the delegation from cl_revoked.

Link: https://bugzilla.redhat.com/show_bug.cgi?id=2217103
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2176575
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Cc: stable@vger.kernel.org # v4.17+
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-08-04 11:38:33 -04:00
Darrick J. Wong
ce85a1e046 xfs: stabilize fs summary counters for online fsck
If the fscounters scrubber notices incorrect summary counters, it's
entirely possible that scrub is simply racing with other threads that
are updating the incore counters.  There isn't a good way to stabilize
percpu counters or set ourselves up to observe live updates with hooks
like we do for the quotacheck or nlinks scanners, so we instead choose
to freeze the filesystem long enough to walk the incore per-AG
structures.

Past me thought that it was going to be commonplace to have to freeze
the filesystem to perform some kind of repair and set up a whole
separate infrastructure to freeze the filesystem in such a way that
userspace could not unfreeze while we were running.  This involved
adding a mutex and freeze_super/thaw_super functions and dealing with
the fact that the VFS freeze/thaw functions can free the VFS superblock
references on return.

This was all very overwrought, since fscounters turned out to be the
only user of scrub freezes, and it doesn't require the log to quiesce,
only the incore superblock counters.  We prevent other threads from
changing the freeze level by calling freeze_super_excl with a custom
freeze cookie to keep everyone else out of the filesystem.

The end result is that fscounters should be much more efficient.  When
we're checking a busy system and we can't stabilize the counters, the
custom freeze will do less work, which should result in less downtime.
Repair should be similarly speedy, but that's in a later patch.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2023-08-04 08:20:57 -07:00
Mark Brown
69af56ae56 arm64/fpsimd: Sync and zero pad FPSIMD state for streaming SVE
We have a function sve_sync_from_fpsimd_zeropad() which is used by the
ptrace code to update the SVE state when the user writes to the the
FPSIMD register set.  Currently this checks that the task has SVE
enabled but this will miss updates for tasks which have streaming SVE
enabled if SVE has not been enabled for the thread, also do the
conversion if the task has streaming SVE enabled.

Fixes: e12310a0d3 ("arm64/sme: Implement ptrace support for streaming mode SVE registers")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230803-arm64-fix-ptrace-ssve-no-sve-v1-3-49df214bfb3e@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-08-04 16:18:32 +01:00
Mark Brown
507ea5dd92 arm64/fpsimd: Sync FPSIMD state with SVE for SME only systems
Currently we guard FPSIMD/SVE state conversions with a check for the system
supporting SVE but SME only systems may need to sync streaming mode SVE
state so add a check for SME support too.  These functions are only used
by the ptrace code.

Fixes: e12310a0d3 ("arm64/sme: Implement ptrace support for streaming mode SVE registers")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230803-arm64-fix-ptrace-ssve-no-sve-v1-2-49df214bfb3e@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-08-04 16:18:31 +01:00
Mark Brown
045aecdfcb arm64/ptrace: Don't enable SVE when setting streaming SVE
Systems which implement SME without also implementing SVE are
architecturally valid but were not initially supported by the kernel,
unfortunately we missed one issue in the ptrace code.

The SVE register setting code is shared between SVE and streaming mode
SVE. When we set full SVE register state we currently enable TIF_SVE
unconditionally, in the case where streaming SVE is being configured on a
system that supports vanilla SVE this is not an issue since we always
initialise enough state for both vector lengths but on a system which only
support SME it will result in us attempting to restore the SVE vector
length after having set streaming SVE registers.

Fix this by making the enabling of SVE conditional on setting SVE vector
state. If we set streaming SVE state and SVE was not already enabled this
will result in a SVE access trap on next use of normal SVE, this will cause
us to flush our register state but this is fine since the only way to
trigger a SVE access trap would be to exit streaming mode which will cause
the in register state to be flushed anyway.

Fixes: e12310a0d3 ("arm64/sme: Implement ptrace support for streaming mode SVE registers")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230803-arm64-fix-ptrace-ssve-no-sve-v1-1-49df214bfb3e@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-08-04 16:18:31 +01:00
Dmitry Baryshkov
d93cf453f5 drm/msm/dpu: fix the irq index in dpu_encoder_phys_wb_wait_for_commit_done
Since commit 1e7ac595fa ("drm/msm/dpu: pass irq to
dpu_encoder_helper_wait_for_irq()") the
dpu_encoder_phys_wb_wait_for_commit_done expects the IRQ index rather
than the IRQ index in phys_enc->intr table, however writeback got the
older invocation in place. This was unnoticed for several releases, but
now it's time to fix it.

Fixes: d7d0e73f7d ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550924/
Link: https://lore.kernel.org/r/20230802100426.4184892-2-dmitry.baryshkov@linaro.org
2023-08-04 18:15:17 +03:00
Tony Lindgren
dfe2aeb226 serial: 8250: Fix oops for port->pm on uart_change_pm()
Unloading a hardware specific 8250 driver can produce error "Unable to
handle kernel paging request at virtual address" about ten seconds after
unloading the driver. This happens on uart_hangup() calling
uart_change_pm().

Turns out commit 04e82793f0 ("serial: 8250: Reinit port->pm on port
specific driver unbind") was only a partial fix. If the hardware specific
driver has initialized port->pm function, we need to clear port->pm too.
Just reinitializing port->ops does not do this. Otherwise serial8250_pm()
will call port->pm() instead of serial8250_do_pm().

Fixes: 04e82793f0 ("serial: 8250: Reinit port->pm on port specific driver unbind")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230804131553.52927-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-04 17:14:38 +02:00
Dmitry Baryshkov
34202be952 drm/msm/dpu: initialise clk_rate to 0 in _dpu_core_perf_get_core_clk_rate
When removing the core perf tune overrides, I also occasionaly removed the
initialisation of the clk_rate variable. Initialise it to 0 to let max()
correctly calculate the maximum of requested clock rates.

Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 6a4bc73915 ("drm/msm/dpu: drop separate dpu_core_perf_tune overrides")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/551321/
Link: https://lore.kernel.org/r/20230804094804.36053-1-dmitry.baryshkov@linaro.org
2023-08-04 18:10:55 +03:00
Andrea Righi
b055448843 rust: fix bindgen build error with UBSAN_BOUNDS_STRICT
With commit 2d47c6956a ("ubsan: Tighten UBSAN_BOUNDS on GCC") if
CONFIG_UBSAN is enabled and gcc supports -fsanitize=bounds-strict, we
can trigger the following build error due to bindgen lacking support for
this additional build option:

   BINDGEN rust/bindings/bindings_generated.rs
 error: unsupported argument 'bounds-strict' to option '-fsanitize='

Fix by adding -fsanitize=bounds-strict to the list of skipped gcc flags
for bindgen.

Fixes: 2d47c6956a ("ubsan: Tighten UBSAN_BOUNDS on GCC")
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230711071914.133946-1-andrea.righi@canonical.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2023-08-04 17:10:50 +02:00
Alice Ryhl
1d24eb2d53 rust: delete ForeignOwnable::borrow_mut
We discovered that the current design of `borrow_mut` is problematic.
This patch removes it until a better solution can be found.

Specifically, the current design gives you access to a `&mut T`, which
lets you change where the `ForeignOwnable` points (e.g., with
`core::mem::swap`). No upcoming user of this API intended to make that
possible, making all of them unsound.

Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Fixes: 0fc4424d24 ("rust: types: introduce `ForeignOwnable`")
Link: https://lore.kernel.org/r/20230706094615.3080784-1-aliceryhl@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2023-08-04 17:10:50 +02:00
Boqun Feng
b3d8aa84bb rust: allocator: Prevent mis-aligned allocation
Currently the rust allocator simply passes the size of the type Layout
to krealloc(), and in theory the alignment requirement from the type
Layout may be larger than the guarantee provided by SLAB, which means
the allocated object is mis-aligned.

Fix this by adjusting the allocation size to the nearest power of two,
which SLAB always guarantees a size-aligned allocation. And because Rust
guarantees that the original size must be a multiple of alignment and
the alignment must be a power of two, then the alignment requirement is
satisfied.

Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Co-developed-by: "Andreas Hindborg (Samsung)" <nmi@metaspace.dk>
Signed-off-by: "Andreas Hindborg (Samsung)" <nmi@metaspace.dk>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Cc: stable@vger.kernel.org # v6.1+
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Fixes: 247b365dc8 ("rust: add `kernel` crate")
Link: https://github.com/Rust-for-Linux/linux/issues/974
Link: https://lore.kernel.org/r/20230730012905.643822-2-boqun.feng@gmail.com
[ Applied rewording of comment as discussed in the mailing list. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2023-08-04 17:10:31 +02:00
Jani Nikula
26e60294e8 drm/i915/sdvo: fix panel_type initialization
Commit 3f9ffce576 ("drm/i915: Do panel VBT init early if the VBT
declares an explicit panel type") started using -1 as the value for
unset panel_type. It gets initialized in intel_panel_init_alloc(), but
the SDVO code never calls it.

Call intel_panel_init_alloc() to initialize the panel, including the
panel_type.

Reported-by: Tomi Leppänen <tomi@tomin.site>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8896
Fixes: 3f9ffce576 ("drm/i915: Do panel VBT init early if the VBT declares an explicit panel type")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.1+
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Tested-by: Tomi Leppänen <tomi@tomin.site>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803122706.838721-1-jani.nikula@intel.com
2023-08-04 17:37:15 +03:00
Radu Bacrau
abe8ff435f firmware: stratix10-rsu: query spt addresses
Extend Intel Remote System Update (RSU) driver to get SPT
(Sub-Partition Table) addresses. The query SPT address can be used
to determine if the RSU QSPI layout is 32kB or 64kB aligned.
The alignment can be determined by minus the upper with the lower of
the SPT addresses.

This patch depends on patch:
firmware: stratix10-svc: Generic Mailbox Command

Signed-off-by: Radu Bacrau <radu.bacrau@intel.com>
Signed-off-by: Kah Jing Lee <kah.jing.lee@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20230727192907.982070-2-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-04 16:31:37 +02:00
Teh Wen Ping
34949a31fb firmware: stratix10-svc: Generic Mailbox Command
Add generic mailbox command that can support SDM command. User can use this
command to send SDM mailbox command. User have to specified an input file
which contain the command data and an output file for SDM response to be
copied over.

Signed-off-by: Teh Wen Ping <wen.ping.teh@intel.com>
Signed-off-by: Kah Jing Lee <kah.jing.lee@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20230727192907.982070-1-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-04 16:31:37 +02:00
Alper Nebi Yasak
dff054e691 firmware: coreboot: framebuffer: Allow building with simpledrm
The coreboot framebuffer driver registers a "simple-framebuffer" device
based on the information from the firmware, after checking that it's
compatible with the formats listed in simplefb.h. It was added before
simpledrm, and its Kconfig marked as dependent on the simplefb driver.

The simpledrm driver can also handle "simple-framebuffer" devices and
the coreboot framebuffer works fine with it on a 'Lick' Chromebook.
Allow building the coreboot framebuffer driver with simpledrm as well.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20230725174334.887485-1-alpernebiyasak@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-04 16:31:32 +02:00
Zev Weiss
8306d6f35d peci: Constify struct peci_controller_ops
As with most ops structs, we never modify it at runtime, and keeping
function pointers in read-only memory is generally a good thing
security-wise.

Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Link: https://lore.kernel.org/r/20230327224315.11135-1-zev@bewilderbeest.net
Reviewed-by: Iwona Winiarska <iwona.winiarska@intel.com>
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
Link: https://lore.kernel.org/r/20230623142805.577612-1-iwona.winiarska@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-04 16:21:30 +02:00
Rob Herring
a436194d0e cdx: Explicitly include correct DT includes
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Nipun Gupta <nipun.gupta@amd.com>
Link: https://lore.kernel.org/r/20230717150355.1749845-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-04 16:21:20 +02:00
Zhang Shurong
2fd84b9b83 uio: pruss: fix to check return value of platform_get_irq() in pruss_probe()
The platform_get_irq might be failed and return a negative result. So
there should have an error handling code.

Fixed this by adding an error handling code.

Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Link: https://lore.kernel.org/r/tencent_8E383752B54E5BF860711E500AD8A8971208@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-04 16:21:04 +02:00
Rob Clark
05d56d8079 dma-buf/sync_file: Fix docs syntax
Fixes the warning:

  include/uapi/linux/sync_file.h:77: warning: Function parameter or member 'num_fences' not described in 'sync_file_info'

Fixes: 2d75c88fef ("staging/android: refactor SYNC IOCTLs")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230724145000.125880-1-robdclark@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-04 16:20:39 +02:00
Nam Cao
1422b526fb staging: rtl8712: fix race condition
In probe function, request_firmware_nowait() is called to load firmware
asynchronously. At completion of firmware loading, register_netdev() is
called. However, a mutex needed by netdev is initialized after the call
to request_firmware_nowait(). Consequently, it can happen that
register_netdev() is called before the driver is ready.

Move the mutex initialization into r8712_init_drv_sw(), which is called
before request_firmware_nowait().

Reported-by: syzbot+b08315e8cf5a78eed03c@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-staging/000000000000d9d4560601b8e0d7@google.com/T/#u
Fixes: 8c213fa591 ("staging: r8712u: Use asynchronous firmware loading")
Cc: stable <stable@kernel.org>
Signed-off-by: Nam Cao <namcaov@gmail.com>
Link: https://lore.kernel.org/r/20230731110620.116562-1-namcaov@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-04 16:20:13 +02:00
Zhu Wang
ac19020be0 staging: fieldbus: arcx-anybus: Do not check 0 for platform_get_irq()
Since platform_get_irq() never returned zero, so it need not to check
whether it returned zero, and we use the return error code of
platform_get_irq() to replace the current return error code, for that
platform_get_irq() may return -EINVAL or -ENXIO.

Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Link: https://lore.kernel.org/r/20230803092701.52697-1-wangzhu9@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-04 16:19:55 +02:00