For reducing the unnecessary use of controls_rwsem in the drivers,
this patch adds a new variant for snd_ctl_find_*() helpers:
snd_ctl_find_id_locked() and snd_ctl_find_numid_locked() look for a
kctl element inside the card->controls_rwsem -- that is, doing the
very same as what snd_ctl_find_id() and snd_ctl_find_numid() did until
now. snd_ctl_find_id() and snd_ctl_find_numid() remain same,
i.e. still unlocked version, but they will be switched to locked
version once after all callers are replaced.
The patch also replaces the calls of snd_ctl_find_id() and
snd_ctl_find_numid() in a few places; all of those are places where we
know that the functions are called properly with controls_rwsem held.
All others are without rwsem (although they should have been).
After this patch, we'll turn on the locking in snd_ctl_find_id() and
snd_ctl_find_numid() to be more race-free.
Link: https://lore.kernel.org/r/20230718141304.1032-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The controls_rwsem of snd_card object is rather an internal lock, and
not really meant to be used by others for its data protection.
This patch addresses it by replacing the controls_rwsem usages with
the own (new) mutex.
Note that the up_write() and down_write() calls around
gbaudio_remove_component_controls() are simply dropped without
replacement. These temporary up/down were a workaround since
gbaudio_remove_component_controls() itself took the rwsem. Now it was
also gone, we can clean up the workaround, too.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Cc: Mark Greer <mgreer@animalcreek.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: Alex Elder <elder@kernel.org>
Cc: greybus-dev@lists.linaro.org
Link: https://lore.kernel.org/r/20230718141304.1032-8-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use the standard snd_ctl_activate_id() helper instead of an open code
for code simplification.
Acked-by: Mark Brown <broonie@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: "Nuno Sá" <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20230718141304.1032-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To assure the proper locking, add the lockdep check to
__snd_ctl_remove(), __snd_ctl_add_replace() and other internal
functions to handle user controls.
Link: https://lore.kernel.org/r/20230718141304.1032-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
So far, snd_ctl_remove() requires its caller to take
card->controls_rwsem manually before the call for avoiding possible
races. However, many callers don't care and miss the locking.
Basically it's cumbersome and error-prone to enforce it to each
caller. Moreover, card->controls_rwsem is a field that should be used
only by internal or proper helpers, and it's not to be touched at
random external places.
This patch is an attempt to make those calls more consistent: now
snd_ctl_remove() takes the card->controls_rwsem internally, just like
other API functions for kctls. Since a few callers already take the
controls_rwsem locks, the patch removes those locks at the same time,
too.
Link: https://lore.kernel.org/r/20230718141304.1032-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use the standard snd_ctl_remove_id() helper instead of open code for
removing a kctl. This helps for avoiding possible races.
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230718141304.1032-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use the standard snd_ctl_remove_id() helper function instead of open
code. This allows us to reduce the manual card->rwsem lock in the
caller side.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Johan Hovold <johan@kernel.org>
Cc: Alex Elder <elder@kernel.org>
Cc: greybus-dev@lists.linaro.org
Link: https://lore.kernel.org/r/20230718141304.1032-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_ctl_rename() expects that card->controls_rwsem is held in the
caller side for avoiding possible races, but actually no one really
did that. It's likely because this operation is done usually only at
the device initialization where no race can happen. But, it's still
safer to take a lock, so we just take the lock inside snd_ctl_rename()
like most of other API functions do.
Link: https://lore.kernel.org/r/20230718141304.1032-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If the user set an MTU value, it usually means that there are special
requirements for the MTU. But if an interface gots activated, the MTU was
always recalculated and then the user set value was overwritten.
The only reason why this user set value has to be overwritten, is when the
MTU has to be decreased because batman-adv is not able to transfer packets
with the user specified size.
Fixes: c6c8fea297 ("net: Add batman-adv meshing protocol")
Cc: stable@vger.kernel.org
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
If an interface changes the MTU, it is expected that an NETDEV_PRECHANGEMTU
and NETDEV_CHANGEMTU notification events is triggered. This worked fine for
.ndo_change_mtu based changes because core networking code took care of it.
But for auto-adjustments after hard-interfaces changes, these events were
simply missing.
Due to this problem, non-batman-adv components weren't aware of MTU changes
and thus couldn't perform their own tasks correctly.
Fixes: c6c8fea297 ("net: Add batman-adv meshing protocol")
Cc: stable@vger.kernel.org
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Most variables of type struct pwm_chip * are named "chip", there are
only three outliers called "pc". Change these three to "chip", too, for
consistency.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
function clk_prepare_enable may fail in ep93xxfb_probe, therefore,
add a return value check to clk_prepare_enable and handle the
error.
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Signed-off-by: Helge Deller <deller@gmx.de>
This func misses checking for platform_get_irq()'s call and may passes the
negative error codes to request_irq(), which takes unsigned IRQ #,
causing it to fail with -EINVAL, overriding an original error code.
Fix this by stop calling request_irq() with invalid IRQ #s.
Fixes: 1630d85a83 ("au1200fb: fix hardcoded IRQ")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Don't populate the const read-only arrays on the stack but instead
make them static const. Use smaller types to use less storage for
the arrays. Also makes the object code a little smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
There are many places c->vc_cell_height is used in the code of
vgacon_cursor(). Caching the value to a local variable makes the code
much easier to follow.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Helge Deller <deller@gmx.de>
The return value is neither used, nor vgacon_doresize() returns an
error. So change the reurn type to void.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Helge Deller <deller@gmx.de>
Most of the forward declarations in vgacon are not needed. Drop them.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Helge Deller <deller@gmx.de>
Switch vgacon_scrolldelta() and vgacon_restore_screen() positions, so
that the former is not needed to be forward-declared.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Helge Deller <deller@gmx.de>
After commit d2ccd7bc8a ("tcp: avoid resetting ACK timer in DCTCP"),
tcp_enter_quickack_mode() is only used from net/ipv4/tcp_input.c.
Fixes: d2ccd7bc8a ("tcp: avoid resetting ACK timer in DCTCP")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20230718162049.1444938-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
entries and bind debugfs files would display wrong data on NETSYS_V2 and
later because instead of using mtk_get_ib1_pkt_type the driver would use
MTK_FOE_IB1_PACKET_TYPE which corresponds to NETSYS_V1(.x) SoCs.
Use mtk_get_ib1_pkt_type so entries and bind records display correctly.
Fixes: 03a3180e5c ("net: ethernet: mtk_eth_soc: introduce flow offloading support for mt7986")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/c0ae03d0182f4d27b874cbdf0059bc972c317f3c.1689727134.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In most cases UDP sockets use the default data ready callback.
Leverage the indirect call wrapper for such callback to avoid an
indirect call in fastpath.
The above gives small but measurable performance gain under UDP flood.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/d47d53e6f8ee7a11228ca2f025d6243cc04b77f3.1689691004.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit says:
====================
r8169: revert two changes that caused regressions
This reverts two changes that caused regressions.
====================
Link: https://lore.kernel.org/r/ddadceae-19c9-81b8-47b5-a4ff85e2563a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wei Fang says:
====================
clean up the FEC driver
When reading the codes of the FEC driver recently, I found there are
some redundant or invalid codes, these codes make the FEC driver a
bit messy and not concise, so this patch set has cleaned up the FEC
driver. At present, I only found these, but I believe these are not
all, I will continue to clean up the FEC driver in the future.
====================
Link: https://lore.kernel.org/r/20230718090928.2654347-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Three members of struct fec_enet_private have not been used since
they were first introduced into the FEC driver (commit 6605b730c0
("FEC: Add time stamping code and a PTP hardware clock")). Namely,
last_overflow_check, rx_hwtstamp_filter and base_incval. These
unused members make the struct fec_enet_private a bit messy and
might confuse the readers. There is no reason to keep them in the
FEC driver any longer.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://lore.kernel.org/r/20230718090928.2654347-4-wei.fang@nxp.com
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The fec_enet_init() is only invoked when the FEC driver probes, and
the network device of FEC is not been brought up at this moment. So
the fec_set_mac_address() does nothing and just returns zero when it
is invoked in the fec_enet_init(). Actually, the MAC address is set
into the hardware through fec_restart() which is also called in the
fec_enet_init().
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://lore.kernel.org/r/20230718090928.2654347-3-wei.fang@nxp.com
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the commit 95698ff617 ("net: fec: using page pool to manage
RX buffers") has been applied, all the rx packets, no matter small
packets or large packets are put directly into the kernel networking
buffers. That is to say, the rx copybreak function has been removed
since then, but the related code has not been completely cleaned up.
So the purpose of this patch is to clean up the remaining related
code of rx copybreak.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://lore.kernel.org/r/20230718090928.2654347-2-wei.fang@nxp.com
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'clock_in_out' property is optional, and it can be one of two enums.
The binding does not specify what is the behavior when the property is
missing altogether.
Hence, add a default value that the driver can use.
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230718090914.282293-1-eugen.hristev@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 3f4ca5fafc.
Commit 3f4ca5fafc ("tcp: avoid the lookup process failing to get sk in
ehash table") reversed the order in how a socket is inserted into ehash
to fix an issue that ehash-lookup could fail when reqsk/full sk/twsk are
swapped. However, it introduced another lookup failure.
The full socket in ehash is allocated from a slab with SLAB_TYPESAFE_BY_RCU
and does not have SOCK_RCU_FREE, so the socket could be reused even while
it is being referenced on another CPU doing RCU lookup.
Let's say a socket is reused and inserted into the same hash bucket during
lookup. After the blamed commit, a new socket is inserted at the end of
the list. If that happens, we will skip sockets placed after the previous
position of the reused socket, resulting in ehash lookup failure.
As described in Documentation/RCU/rculist_nulls.rst, we should insert a
new socket at the head of the list to avoid such an issue.
This issue, the swap-lookup-failure, and another variant reported in [0]
can all be handled properly by adding a locked ehash lookup suggested by
Eric Dumazet [1].
However, this issue could occur for every packet, thus more likely than
the other two races, so let's revert the change for now.
Link: https://lore.kernel.org/netdev/20230606064306.9192-1-duanmuquan@baidu.com/ [0]
Link: https://lore.kernel.org/netdev/CANn89iK8snOz8TYOhhwfimC7ykYA78GA3Nyv8x06SZYa1nKdyA@mail.gmail.com/ [1]
Fixes: 3f4ca5fafc ("tcp: avoid the lookup process failing to get sk in ehash table")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230717215918.15723-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, there are two major issues with stmmac driver statistics
First of all, statistics in stmmac_extra_stats, stmmac_rxq_stats
and stmmac_txq_stats are 32 bit variables on 32 bit platforms. This
can cause some stats to overflow after several minutes of
high traffic, for example rx_pkt_n, tx_pkt_n and so on.
Secondly, if HW supports multiqueues, there are frequent cacheline
ping pongs on some driver statistic vars, for example, normal_irq_n,
tx_pkt_n and so on. What's more, frequent cacheline ping pongs on
normal_irq_n happens in ISR, this makes the situation worse.
To improve the driver, we convert those statistics to 64 bit, implement
ndo_get_stats64 and update .get_ethtool_stats implementation
accordingly. We also use per-queue statistics where necessary to remove
the cacheline ping pongs as much as possible to make multiqueue
operations faster. Those statistics which are not possible to overflow
and not frequently updated are kept as is.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20230717160630.1892-3-jszhang@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
FWICT, the common style in other network drivers: the network
statistics are not cleared since initialization, follow the common
style for stmmac.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20230717160630.1892-2-jszhang@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEH7ZpcWbFyOOp6OJbrB3Eaf9PW7cFAmS3s90ACgkQrB3Eaf9P
W7dl5A/+N59cq4fk7k8V4KQ/MWIB42quzq6lem8nqSams7tGaug1AyJkr4urZdjg
DwlmpGHEw4yWmHiOdzbPwgqOsqYyhzbcwU2RPNuDgdtkJm6CigbddJbIFfx8HvMu
zKLtnKJ7QDGf0TdVjuTcx0DQjsK4rxPzr445iZmvZ3g9rcomkxQZ/LDozjH2QZhc
LYkLrjt09kqLpd5Dkco5/ZuAYGJF4ujAHNTDVkdCuRQFmb+WsfLpzcpT5AtJLGeU
Q/9TfZwI3YH0AbfdpBL8qhDAVYzwTcx6ldWZLbSJNSUUTswg0H7tF+JyBR3wt626
9B+qsSWEvLuA0WFIKdOz484Dt/h3ggTgoEEDVjDEaDLenx3ESx3A8jv4f7IL2EMs
edjTSphj8ZTQv4uw/1CBNIdTbujEtvf4FhkagSvrUoUYOGvobcvqvsvCGzac0d+K
5x7bMSJU9Cnv8YYAB8xbhIN5LqE1+1bPiNHk4xAxW5qfYvO0E2rjwd52DYgCeV2G
GRDbnhAmtrk9HHdtAelWSZyI6tJJNG0H43KSjBUNEdHcVB2bz8iGLHFr72+cAfKp
I0nR3EoGYKQGZHIXiAtqSZIbEHlpU080pclT5WDEJJG0yLR0PwnDiVTrEI2AngCP
dkSvJCi5wwMCx+HljBY0JyH8CDDu3YS1SpfXzEe5lqset4ai4CI=
=e8vA
-----END PGP SIGNATURE-----
Merge tag 'ipsec-next-2023-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2023-07-19
Just a leftover from the last development cycle:
1) delete a clear to zero of encap_oa, it is not needed anymore.
From Leon Romanovsky.
* tag 'ipsec-next-2023-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: delete not-needed clear to zero of encap_oa
====================
Link: https://lore.kernel.org/r/20230719100228.373055-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit adds a function to dump a DRM GPU VA space and a macro for
drivers to register the struct drm_info_list 'gpuvas' entry.
Most likely, most drivers might maintain one DRM GPU VA space per struct
drm_file, but there might also be drivers not having a fixed relation
between DRM GPU VA spaces and a DRM core infrastructure, hence we need the
indirection via the driver iterating it's maintained DRM GPU VA spaces.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230720001443.2380-3-dakr@redhat.com
Add infrastructure to keep track of GPU virtual address (VA) mappings
with a decicated VA space manager implementation.
New UAPIs, motivated by Vulkan sparse memory bindings graphics drivers
start implementing, allow userspace applications to request multiple and
arbitrary GPU VA mappings of buffer objects. The DRM GPU VA manager is
intended to serve the following purposes in this context.
1) Provide infrastructure to track GPU VA allocations and mappings,
using an interval tree (RB-tree).
2) Generically connect GPU VA mappings to their backing buffers, in
particular DRM GEM objects.
3) Provide a common implementation to perform more complex mapping
operations on the GPU VA space. In particular splitting and merging
of GPU VA mappings, e.g. for intersecting mapping requests or partial
unmap requests.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Matthew Brost <matthew.brost@intel.com>
Tested-by: Donald Robson <donald.robson@imgtec.com>
Suggested-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230720001443.2380-2-dakr@redhat.com
Commit fcaa174a9c ("scsi/sg: don't grab scsi host module reference") make
a mess how blk_get_queue() is called, blk_get_queue() returns true on
success while the caller expects it returns 0 on success.
Fix this problem and also add a corresponding error message on failure.
Fixes: fcaa174a9c ("scsi/sg: don't grab scsi host module reference")
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Closes: https://lore.kernel.org/all/87lefv622n.fsf@linux.ibm.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230705024001.177585-1-yukuai1@huaweicloud.com
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The DTS code coding style expects exactly one space before and after '='
sign.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Gather Data Sampling (GDS) is a hardware vulnerability which allows
unprivileged speculative access to data which was previously stored in
vector registers.
Intel processors that support AVX2 and AVX512 have gather instructions
that fetch non-contiguous data elements from memory. On vulnerable
hardware, when a gather instruction is transiently executed and
encounters a fault, stale data from architectural or internal vector
registers may get transiently stored to the destination vector
register allowing an attacker to infer the stale data using typical
side channel techniques like cache timing attacks.
This mitigation is different from many earlier ones for two reasons.
First, it is enabled by default and a bit must be set to *DISABLE* it.
This is the opposite of normal mitigation polarity. This means GDS can
be mitigated simply by updating microcode and leaving the new control
bit alone.
Second, GDS has a "lock" bit. This lock bit is there because the
mitigation affects the hardware security features KeyLocker and SGX.
It needs to be enabled and *STAY* enabled for these features to be
mitigated against GDS.
The mitigation is enabled in the microcode by default. Disable it by
setting gather_data_sampling=off or by disabling all mitigations with
mitigations=off. The mitigation status can be checked by reading:
/sys/devices/system/cpu/vulnerabilities/gather_data_sampling
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Add support for Renesas versa3 clock driver(5p35023).
The clock generator provides 6 output clocks.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230705171000.85786-3-biju.das.jz@bp.renesas.com
[sboyd@kernel.org: Add newline to printk]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Document Renesas versa3 clock generator(5P35023) bindings.
The 5P35023 is a VersaClock programmable clock generator and
is designed for low-power, consumer, and high-performance PCI
Express applications. The 5P35023 device is a three PLL
architecture design, and each PLL is individually programmable
and allowing for up to 6 unique frequency outputs.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230705171000.85786-2-biju.das.jz@bp.renesas.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Due to lack of maintenance and stall of development for a few years now,
and since no new features will ever be added upstream, remove support
for OX810 and OX820 restart feature.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>