Commit graph

1,215,304 commits

Author SHA1 Message Date
Jonas Kuenstler
fa2a1ec504 arm64: dts: imx8mp-phyboard-pollux: Add missing usdhc clocks assignment
Add the missing usdhc2 root clock to 200MHz to be able to support
SDR104 mode for SD-Card on phyBOARD-Pollux-i.MX8MP.

Signed-off-by: Jonas Kuenstler <j.kuenstler@phytec.de>
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-19 15:52:54 +08:00
Teresa Remmet
6fe88df72e arm64: dts: imx8mp-phycore-som: Update regulator output voltages
Set the regulator voltages to the min and max values the i.MX8MP
requires and not what the PMIC provides.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-19 15:52:52 +08:00
Teresa Remmet
c2d28a0c49 arm64: dts: imx8mp-phycore-som: Add regulator names
Add regulator-names for more meaningful description.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-19 15:52:50 +08:00
Teresa Remmet
1a5a034332 arm64: dts: imx8mp-phycore-som: Remove LDO2 and LDO4 pmic nodes
We do not touch LDO2 and LDO4 in linux as they are bypassed.
So remove them completely from device tree.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-19 15:52:48 +08:00
Teresa Remmet
b34f668154 arm64: dts: imx8mp-phycore-som: Correct pad settings
Do not set reserved bits 0 and 3 in pad configuration.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-19 15:52:46 +08:00
Teresa Remmet
2d3779dd1e arm64: dts: imx8mp-phycore-som: Order properties alphabetically
Rearrange properties in order:
- compatible
- reg
- other generic properties
- device specific properties
- vendor specific properties
- status

And use alphabetical order inside a group.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-19 15:52:43 +08:00
Christian Hemp
312ab09419 arm64: dts: imx8mp-phycore-som: Remove eth phy interrupt
In some occasions the ethernet phy IRQ can not be detected correctly
by the SoC. This leads to a non detected link in Linux. The problem is
caused by the buffer that adjusts the voltage between ethernet phy
and SoC. To workaround this, remove the IRQ support for the ethernet
phy and use polling instead.

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-19 15:52:32 +08:00
Alexander Stein
c982ecfa79 arm64: dts: freescale: add initial device tree for MBa93xxLA SBC board
This adds support for TQMa93xx module and MBa93xxLA SBC board.
TQMa93xx is a SOM using i.MX93 SOC. The SOM features PMIC, RAM, e-MMC and
some optional peripherals like SPI-NOR, RTC, EEPROM, gyroscope and
secure element.
TQMa93xxLA is a solder on type SOM and can be used directly on MBa93XXLA.
TQMa93xxCA is a feature compatible, socketable type SOM.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-19 15:48:05 +08:00
Markus Niebel
0010947dbc dt-bindings: arm: add TQMa93xxLA SOM
TQMa93xxLA is a SOM variant in the TQ-Systems GmbH TQMa93xx series using
NXP i.MX93 CPU on an LGA type board.
MBa93xxCA is a starterkit base board for TQMa93xxLA on an adapter board.

Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-19 15:47:19 +08:00
Lucas Stach
53cab4d871 soc: imx: imx8mp-blk-ctrl: register HSIO PLL clock as bus_power_dev child
The blk-ctrl device is deliberately placed outside of the GPC power
domain as it needs to control the power sequencing of the blk-ctrl
domains together with the GPC domains.

Clock runtime PM works by operating on the clock parent device, which
doesn't translate into the neccessary GPC power domain action if the
clk parent is not part of the GPC power domain. Use the bus_power_device
as the parent for the clock to trigger the proper GPC domain actions on
clock runtime power management.

Fixes: 2cbee26e5d ("soc: imx: imx8mp-blk-ctrl: expose high performance PLL clock")
Reported-by: Yannic Moog <Y.Moog@phytec.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-19 15:44:02 +08:00
Peter Zijlstra
d07f09a1f9 sched/fair: Propagate enqueue flags into place_entity()
This allows place_entity() to consider ENQUEUE_WAKEUP and
ENQUEUE_MIGRATED.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230531124604.274010996@infradead.org
2023-07-19 09:43:59 +02:00
Peter Zijlstra
e4ec3318a1 sched/debug: Rename sysctl_sched_min_granularity to sysctl_sched_base_slice
EEVDF uses this tunable as the base request/slice -- make sure the
name reflects this.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230531124604.205287511@infradead.org
2023-07-19 09:43:59 +02:00
Peter Zijlstra
5e963f2bd4 sched/fair: Commit to EEVDF
EEVDF is a better defined scheduling policy, as a result it has less
heuristics/tunables. There is no compelling reason to keep CFS around.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230531124604.137187212@infradead.org
2023-07-19 09:43:58 +02:00
Peter Zijlstra
e8f331bcc2 sched/smp: Use lag to simplify cross-runqueue placement
Using lag is both more correct and simpler when moving between
runqueues.

Notable, min_vruntime() was invented as a cheap approximation of
avg_vruntime() for this very purpose (SMP migration). Since we now
have the real thing; use it.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230531124604.068911180@infradead.org
2023-07-19 09:43:58 +02:00
Peter Zijlstra
76cae9dbe1 sched/fair: Commit to lag based placement
Removes the FAIR_SLEEPERS code in favour of the new LAG based
placement.

Specifically, the whole FAIR_SLEEPER thing was a very crude
approximation to make up for the lack of lag based placement,
specifically the 'service owed' part. This is important for things
like 'starve' and 'hackbench'.

One side effect of FAIR_SLEEPER is that it caused 'small' unfairness,
specifically, by always ignoring up-to 'thresh' sleeptime it would
have a 50%/50% time distribution for a 50% sleeper vs a 100% runner,
while strictly speaking this should (of course) result in a 33%/67%
split (as CFS will also do if the sleep period exceeds 'thresh').

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230531124604.000198861@infradead.org
2023-07-19 09:43:58 +02:00
Peter Zijlstra
147f3efaa2 sched/fair: Implement an EEVDF-like scheduling policy
Where CFS is currently a WFQ based scheduler with only a single knob,
the weight. The addition of a second, latency oriented parameter,
makes something like WF2Q or EEVDF based a much better fit.

Specifically, EEVDF does EDF like scheduling in the left half of the
tree -- those entities that are owed service. Except because this is a
virtual time scheduler, the deadlines are in virtual time as well,
which is what allows over-subscription.

EEVDF has two parameters:

 - weight, or time-slope: which is mapped to nice just as before

 - request size, or slice length: which is used to compute
   the virtual deadline as: vd_i = ve_i + r_i/w_i

Basically, by setting a smaller slice, the deadline will be earlier
and the task will be more eligible and ran earlier.

Tick driven preemption is driven by request/slice completion; while
wakeup preemption is driven by the deadline.

Because the tree is now effectively an interval tree, and the
selection is no longer 'leftmost', over-scheduling is less of a
problem.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230531124603.931005524@infradead.org
2023-07-19 09:43:58 +02:00
Peter Zijlstra
99d4d26551 rbtree: Add rb_add_augmented_cached() helper
While slightly sub-optimal, updating the augmented data while going
down the tree during lookup would be faster -- alas the augment
interface does not currently allow for that, provide a generic helper
to add a node to an augmented cached tree.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230531124603.862983648@infradead.org
2023-07-19 09:43:58 +02:00
Peter Zijlstra
86bfbb7ce4 sched/fair: Add lag based placement
With the introduction of avg_vruntime, it is possible to approximate
lag (the entire purpose of introducing it in fact). Use this to do lag
based placement over sleep+wake.

Specifically, the FAIR_SLEEPERS thing places things too far to the
left and messes up the deadline aspect of EEVDF.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230531124603.794929315@infradead.org
2023-07-19 09:43:58 +02:00
Peter Zijlstra
e0c2ff903c sched/fair: Remove sched_feat(START_DEBIT)
With the introduction of avg_vruntime() there is no need to use worse
approximations. Take the 0-lag point as starting point for inserting
new tasks.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230531124603.722361178@infradead.org
2023-07-19 09:43:58 +02:00
Peter Zijlstra
af4cf40470 sched/fair: Add cfs_rq::avg_vruntime
In order to move to an eligibility based scheduling policy, we need
to have a better approximation of the ideal scheduler.

Specifically, for a virtual time weighted fair queueing based
scheduler the ideal scheduler will be the weighted average of the
individual virtual runtimes (math in the comment).

As such, compute the weighted average to approximate the ideal
scheduler -- note that the approximation is in the individual task
behaviour, which isn't strictly conformant.

Specifically consider adding a task with a vruntime left of center, in
this case the average will move backwards in time -- something the
ideal scheduler would of course never do.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230531124603.654144274@infradead.org
2023-07-19 09:43:58 +02:00
Ingo Molnar
752182b24b Linux 6.5-rc2
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmS0at0eHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG6m8H/RZCd2DWeM94CgK5
 DIxNLxu90PrEcrOnqeHFJtQoSiUQTHeseh9E4BH0JdPDxtlU89VwYRAevseWiVkp
 JyyJPB40UR4i2DO0P1+oWBBsGEG+bo8lZ1M+uxU5k6lgC0fAi96/O48mwwmI0Mtm
 P6BkWd3IkSXc7l4AGIrKa5P+pYEnm0Z6YAZILfdMVBcLXZWv1OAwEEkZNdUuhE3d
 5DxlQ8MLzlQIbe+LasiwdL9r606acFaJG9Hewl9x5DBlsObZ3d2rX4vEt1NEVh89
 shV29xm2AjCpLh4kstJFdTDCkDw/4H7TcFB/NMxXyzEXp3Bx8YXq+mjVd2mpq1FI
 hHtCsOA=
 =KiaU
 -----END PGP SIGNATURE-----

Merge tag 'v6.5-rc2' into sched/core, to pick up fixes

Sync with upstream fixes before applying EEVDF.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2023-07-19 09:43:25 +02:00
Chin Yik Ming
48b5583719 sched/headers: Rename task_struct::state to task_struct::__state in the comments too
The rename in 2f064a59a1 ("sched: Change task_struct::state") missed the
comments.

[ mingo: Improved the changelog. ]

Signed-off-by: Chin Yik Ming <yikming2222@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Link: https://lore.kernel.org/r/20230717064952.2804-1-yikming2222@gmail.com
2023-07-19 09:42:58 +02:00
Artur Weber
ee37a457af ARM: dts: exynos: Add Samsung Galaxy Tab 3 8.0 boards
Introduce support for the Galaxy Tab 3 8.0 series of boards:

 - Samsung Galaxy Tab 3 8.0 WiFi (SM-T310/lt01wifi)
 - Samsung Galaxy Tab 3 8.0 3G (SM-T311/lt013g)
 - Samsung Galaxy Tab 3 8.0 LTE (SM-T315/lt01lte)

What works:

 - Display and backlight
 - Touchscreen
 - GPIO buttons, hall sensor
 - WiFi and Bluetooth
 - USB, fuel gauge, charging
 - Accelerometer and magnetometer
 - Audio: speaker, microphone, headset
 - WiFi model only: light sensor

Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Link: https://lore.kernel.org/r/20230714101229.30641-1-aweber.kernel@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-07-19 09:34:34 +02:00
Krzysztof Kozlowski
982655cb0e ARM: dts: samsung: s5pv210-smdkv210: correct ethernet reg addresses (split)
The davicom,dm9000 Ethernet Controller accepts two reg addresses.

Fixes: b672b27d23 ("ARM: dts: Add Device tree for s5pc110/s5pv210 boards")
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20230713152926.82884-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-07-19 09:33:00 +02:00
Krzysztof Kozlowski
cf0cb2af6a ARM: dts: samsung: s3c6410-mini6410: correct ethernet reg addresses (split)
The davicom,dm9000 Ethernet Controller accepts two reg addresses.

Fixes: a43736deb4 ("ARM: dts: Add dts file for S3C6410-based Mini6410 board")
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20230713152926.82884-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-07-19 09:32:14 +02:00
Jaewon Kim
74641f4a79 arm64: dts: exynos: add pwm node for exynosautov9-sadk
Add pwm node to support fan on exynosautov9-sadk board.
PWM channel 3 of ExynosAutov9 is connected to fan for SoC cooling
in SADK board.

Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Link: https://lore.kernel.org/r/20230718062200.79306-3-jaewon02.kim@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-07-19 09:31:27 +02:00
Jaewon Kim
8188b984de dt-bindings: pwm: samsung: add exynosautov9 compatible
Add samsung,exynosautov9-pwm compatible string to binding document.

Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Link: https://lore.kernel.org/r/20230718062200.79306-2-jaewon02.kim@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-07-19 09:31:22 +02:00
Fabio Estevam
ec20d468d0 ARM: dts: imx: Remove regulators from simple-bus
Regulators should not be placed under simple-bus.

Move it outside simple-bus to fix the following schema warnings:

regulators: $nodename:0: 'regulators' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
From schema: site-packages/dtschema/schemas/simple-bus.yaml

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-19 15:30:26 +08:00
Rob Herring
66ba9c05fc ARM: imx: Drop unused includes
Several includes are not needed, so drop them.

of_platform.h (for now) implicitly includes platform_device.h and of.h, so
add explicit includes of those as needed.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-19 15:28:44 +08:00
Arnd Bergmann
b3d2b014b2 RDMA/irdma: Fix building without IPv6
The new irdma_iw_get_vlan_prio() function requires IPv6 support to build:

x86_64-linux-ld: drivers/infiniband/hw/irdma/cm.o: in function `irdma_iw_get_vlan_prio':
cm.c:(.text+0x2832): undefined reference to `ipv6_chk_addr'

Add a compile-time check in the same way as elsewhere in this file to avoid
this by conditionally leaving out the ipv6 specific bits.

Fixes: f877f22ac1 ("RDMA/irdma: Implement egress VLAN priority")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230718193835.3546684-1-arnd@kernel.org
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-07-19 10:13:10 +03:00
Fabio Estevam
5aafda608f arm64: dts: imx8mn-evk: Add camera support
Add support for the OV5640 camera.

Tested with the following commands:

media-ctl -l "'ov5640 2-003c':0 -> 'csis-32e30000.mipi-csi':0 [1]"
media-ctl -V "'ov5640 2-003c':0 [fmt:UYVY8_1X16/640x480 field:none]"
media-ctl -V "'crossbar':0 [fmt:UYVY8_1X16/640x480 field:none]"
media-ctl -V "'mxc_isi.0':0 [fmt:UYVY8_1X16/640x480 field:none]"
v4l2-ctl --device /dev/video0 --set-fmt-video=width=640,height=480,pixelformat=YUYV
v4l2-ctl --stream-mmap -d /dev/video0;
gst-launch-1.0 -v v4l2src device=/dev/video0 ! video/x-raw,width=640,height=480 ! waylandsink

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-19 15:04:49 +08:00
Fabio Estevam
e8abdd58a1 arm64: dts: imx8mn-evk: Add HDMI support
imx8mn-evk has a MIPI DSI port that can be used with a ADV7535 MIPI
DSI to HDMI bridge.

Add support for it.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-19 15:04:40 +08:00
Mao Zhu
03df47c1bb can: ucan: Remove repeated word
Delete one of repeated word 'information' in comment.

Signed-off-by: Mao Zhu <zhumao001@208suo.com>
Link: https://lore.kernel.org/all/20230718163718.461137-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-07-19 09:04:36 +02:00
Marc Kleine-Budde
b38eb89112 Merge patch series "can: kvaser_pciefd: Add support for new Kvaser PCI Express devices"
Jimmy Assarsson <extja@kvaser.com> says:

This patch series adds support for a range of new Kvaser PCI Express
devices based on the SmartFusion2 SoC, to the kvaser_pciefd driver.

In the first patch, the hardware specific constants and functions are
moved into a driver_data struct.

In the second patch, we add the new devices and their hardware
specific constants and functions.

Changes in v2:
- Rebased on
  can: kvaser_pciefd: Fixes and improvements
  https://lore.kernel.org/all/20230529134248.752036-1-extja@kvaser.com
- Dropped
  can: kvaser_pciefd: Wrap register read and writes with macros
  https://lore.kernel.org/linux-can/20230523094354.83792-17-extja@kvaser.com
  since the driver became a lot cleaner when using FIELD_{GET,PREP} and GENMASK.
  Moved some parts of the patch into
  can: kvaser_pciefd: Move hardware specific constants and functions into a driver_data struct
  Removed macros reading/writing registers.
- Link to v1: https://lore.kernel.org/all/20230523094354.83792-14-extja@kvaser.com

Link: https://lore.kernel.org/all/20230622151153.294844-1-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-07-19 09:04:21 +02:00
Jimmy Assarsson
f33ad6776b can: kvaser_pciefd: Add support for new Kvaser pciefd devices
Add support for new Kvaser pciefd devices, based on SmartFusion2 SoC.

Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20230622151153.294844-3-extja@kvaser.com
[mkl: mark structs as static]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-07-19 09:03:10 +02:00
Jimmy Assarsson
c2ad812956 can: kvaser_pciefd: Move hardware specific constants and functions into a driver_data struct
Move hardware specific address offsets, interrupt masks and DMA mapping
function, into struct kvaser_pciefd_driver_data, as a step towards adding
new devices based on different hardware.

Co-developed-by: Martin Jocic <majoc@kvaser.com>
Signed-off-by: Martin Jocic <majoc@kvaser.com>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20230622151153.294844-2-extja@kvaser.com
[mkl: mark structs as static]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-07-19 09:01:21 +02:00
Marc Kleine-Budde
2e12d79f56 Merge patch series "can: xilinx_can: Add support for reset"
Michal Simek <michal.simek@amd.com> says:

IP core has option reset line which can be wired that's why add
support for optional reset.

Changes in v2:
- Add Conor's ACK
- Fix use-after-free in xcan_remove reported by Marc.
- Link to v1: https://lore.kernel.org/all/cover.1689084227.git.michal.simek@amd.com

Link: https://lore.kernel.org/all/cover.1689164442.git.michal.simek@amd.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-07-19 08:57:05 +02:00
Rob Herring
22d8e8d633 can: Explicitly include correct DT includes
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/all/20230714174757.4060748-1-robh@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-07-19 08:55:28 +02:00
Srinivas Neeli
25000fc785 can: xilinx_can: Add support for controller reset
Add support for an optional reset for the CAN controller using the reset
driver. If the CAN node contains the "resets" property, then this logic
will perform CAN controller reset.

Signed-off-by: Srinivas Neeli <srinivas.neeli@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/all/ab7e6503aa3343e39ead03c1797e765be6c50de2.1689164442.git.michal.simek@amd.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-07-19 08:55:28 +02:00
Michal Simek
62bd0232d7 dt-bindings: can: xilinx_can: Add reset description
IP core has input for reset signal which can be connected that's why
describe optional reset property.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/all/bfaed896cc51af02fe5f290675313ab4dcab0d33.1689164442.git.michal.simek@amd.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-07-19 08:55:28 +02:00
Fabio Estevam
99e5d6d274 arm64: dts: imx8mm-evk: Add camera support
Add support for the OV5640 camera.

Tested with the following commands:

media-ctl -l "'ov5640 2-003c':0 -> 'csis-32e30000.mipi-csi':0 [1]"
media-ctl -V "'ov5640 2-003c':0 [fmt:UYVY8_1X16/640x480 field:none]"
media-ctl -V "'csis-32e30000.mipi-csi':0 [fmt:UYVY8_1X16/640x480 field:none]"
media-ctl -V "'csi':0 [fmt:UYVY8_1X16/640x480 field:none]";
v4l2-ctl --stream-mmap -d /dev/video0

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-19 14:49:12 +08:00
Rob Herring
ef2c1c84bc soc: imx: Explicitly include correct DT includes
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-19 14:45:34 +08:00
Frank Li
bce0734548 arm64: dts: imx8qm-mek: delete A72 thermal zone
The A72 nodes have been deleted in this DTB. Removes the corresponding
thermal zone to ensure a successful build.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-19 14:34:03 +08:00
Frank Li
36e81d6a90 arm64: dts: imx8qm: add thermal zone and cooling map
Add thermal zone and cooling map for cpufreq.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-19 14:34:01 +08:00
Frank Li
88114e1080 arm64: dts: imx8qm: add cpu frequency table
Add A53 and A72 opp_table.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-19 14:33:50 +08:00
Yashwanth Varakala
055e38c763 arm64: dts: imx8mp-phyboard-pollux-rdk: Fix led sub-node names
Dtschema of the leds sub-node names expects "led-1" instead of led1.
So, the sub-node names are corrected according to the regexes.

Signed-off-by: Yashwanth Varakala <y.varakala@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-19 14:30:47 +08:00
Rob Herring
e06b83d8a4 ARM: hisi: Drop unused includes
of_platform.h is not needed, so drop it.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2023-07-19 06:29:04 +00:00
Artur Weber
bf93349b11 Input: mms114 - add support for touch keys
MELFAS MMS114 and similar touchscreens have support for touch keys.
Enable support of them in the driver. The keycodes to emit can be
controlled by the linux,keycodes DT property.

Sidenote - the MAX_TOUCHKEYS value is set to 15, as that's the
maximum value that the ID field can contain. I don't have access
to any datasheets that could confirm or deny whether this is accurate.

Most downstream drivers I've been able to find only use up to 2 keys
(though I did find a driver that mentioned up to 4, but only 2 were
used). They don't have any checks for a maximum keycode value, it is
just extracted from the ID bits (0xf mask).

The drivers I've been able to find also don't use touch ID 0; I assume
that it is never used, so the keycodes provided in the DT start from
touch ID 1. I suppose this is in-line with the regular behavior
for touch IDs in touchscreen events, as there the provided touch ID
is always lowered by 1, which would cause an overflow if it was 0...
Just in case, we quietly return if the touch ID is set to 0 here.

The implementation of the linux,keycodes property handling code was
adapted from the msg2638 driver.

Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Link: https://lore.kernel.org/r/20230714100424.29798-3-aweber.kernel@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-07-18 23:21:23 -07:00
Artur Weber
21c133be02 dt-bindings: mms114: Add linux,keycodes property for touch keys
MELFAS MMS114 and similar touchscreens have support for touch keys.
Add the linux,keycodes property which can be used to set up the
keycodes for the touch keys.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Link: https://lore.kernel.org/r/20230714100424.29798-2-aweber.kernel@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-07-18 23:21:11 -07:00
Rob Herring
e0d64db2a8 ARM: dts: hisilicon: Fix "status" values
The defined value for "status" is "disabled", not "disable".

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2023-07-19 06:18:24 +00:00