Some ATS-capable peripherals can issue requests to the processor to service
peripheral page requests using PCIe PRI (the Page Request Interface). IOMMU
supports PRI using PPR log buffer. IOMMU writes PRI request to PPR log
buffer and sends PPR interrupt to host. When there is no space in the
PPR log buffer (PPR log overflow) it will set PprOverflow bit in 'MMIO
Offset 2020h IOMMU Status Register'. When this happens PPR log needs to be
restarted as specified in IOMMU spec [1] section 2.6.2.
When handling the event it just resumes the PPR log without resizing
(similar to the way event and GA log overflow is handled).
Failing to handle PPR overflow means device may not work properly as
IOMMU stops processing new PPR events from device.
[1] https://www.amd.com/system/files/TechDocs/48882_3.07_PUB.pdf
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20230628051624.5792-3-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Each IOMMU has three log buffers (Event, GA and PPR log). Once a buffer
becomes full, IOMMU generates an interrupt with the corresponding overflow
status bit, and stop processing the log. To handle an overflow, the IOMMU
driver needs to disable the log, clear the overflow status bit, and
re-enable the log. This procedure is same among all types of log
buffer except it uses different overflow status bit and enabling bit.
Hence, to consolidate the log buffer restarting logic, introduce a helper
function amd_iommu_restart_log(), which caller can specify parameters
specific for each type of log buffer.
Also rename MMIO_STATUS_EVT_OVERFLOW_INT_MASK as
MMIO_STATUS_EVT_OVERFLOW_MASK.
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20230628051624.5792-2-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
IOMMU v2 found in newer Rockchip SoCs, e.g. RK356x and RK3588, support
placing directory and page tables in up to 40-bit addressable physical
memory.
Remove the use of GFP_DMA32 flag for IOMMU v2 now that the physical
address to the directory table is correctly written to DTE_ADDR.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20230617182540.3091374-3-jonas@kwiboo.se
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The physical address to the directory table is currently encoded using
the following bit layout for IOMMU v2.
31:12 - Address bit 31:0
11: 4 - Address bit 39:32
This is also the bit layout used by the vendor kernel.
However, testing has shown that addresses to the directory/page tables
and memory pages are all encoded using the same bit layout.
IOMMU v1:
31:12 - Address bit 31:0
IOMMU v2:
31:12 - Address bit 31:0
11: 8 - Address bit 35:32
7: 4 - Address bit 39:36
Change to use the mk_dtentries ops to encode the directory table address
correctly. The value written to DTE_ADDR may include the valid bit set,
a bit that is ignored and DTE_ADDR reg read it back as 0.
This also update the bit layout comment for the page address and the
number of nybbles that are read back for DTE_ADDR comment.
These changes render the dte_addr_phys and dma_addr_dte ops unused and
is removed.
Fixes: 227014b33f ("iommu: rockchip: Add internal ops to handle variants")
Fixes: c55356c534 ("iommu: rockchip: Add support for iommu v2")
Fixes: c987b65a57 ("iommu/rockchip: Fix physical address decoding")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20230617182540.3091374-2-jonas@kwiboo.se
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Clear pasid state in device amd_iommu_free_device() path. It will make
sure no new ppr notifier is registered in free path.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20230609105146.7773-3-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When unbinding pasid - a race condition exists vs outstanding page faults.
To prevent this, the pasid_state object contains a refcount.
* set to 1 on pasid bind
* incremented on each ppr notification start
* decremented on each ppr notification done
* decremented on pasid unbind
Since refcount_dec assumes that refcount will never reach 0:
the current implementation causes the following to be invoked on
pasid unbind:
REFCOUNT_WARN("decrement hit 0; leaking memory")
Fix this issue by changing refcount_dec to refcount_dec_and_test
to explicitly handle refcount=1.
Fixes: 8bc54824da ("iommu/amd: Convert from atomic_t to refcount_t on pasid_state->count")
Signed-off-by: Daniel Marcovitch <dmarcovitch@nvidia.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20230609105146.7773-2-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Per the reasoning in commit 4bf7fda4dc ("iommu/dma: Add config for
PCI SAC address trick") and its subsequent revert, this mechanism no
longer serves its original purpose, but now only works around broken
hardware/drivers in a way that is unfortunately too impactful to remove.
This does not, however, prevent us from solving the performance impact
which that workaround has on large-scale systems that don't need it.
Once the 32-bit IOVA space fills up and a workload starts allocating and
freeing on both sides of the boundary, the opportunistic SAC allocation
can then end up spending significant time hunting down scattered
fragments of free 32-bit space, or just reestablishing max32_alloc_size.
This can easily be exacerbated by a change in allocation pattern, such
as by changing the network MTU, which can increase pressure on the
32-bit space by leaving a large quantity of cached IOVAs which are now
the wrong size to be recycled, but also won't be freed since the
non-opportunistic allocations can still be satisfied from the whole
64-bit space without triggering the reclaim path.
However, in the context of a workaround where smaller DMA addresses
aren't simply a preference but a necessity, if we get to that point at
all then in fact it's already the endgame. The nature of the allocator
is currently such that the first IOVA we give to a device after the
32-bit space runs out will be the highest possible address for that
device, ever. If that works, then great, we know we can optimise for
speed by always allocating from the full range. And if it doesn't, then
the worst has already happened and any brokenness is now showing, so
there's little point in continuing to try to hide it.
To that end, implement a flag to refine the SAC business into a
per-device policy that can automatically get itself out of the way if
and when it stops being useful.
CC: Linus Torvalds <torvalds@linux-foundation.org>
CC: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Vasant Hegde <vasant.hegde@amd.com>
Tested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/b8502b115b915d2a3fabde367e099e39106686c8.1681392791.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Remove the race where a hotplug of a device into an existing group will
have the device installed in the group->devices, but not yet attached to
the group's current domain.
Move the group attachment logic from iommu_probe_device() and put it under
the same mutex that updates the group->devices list so everything is
atomic under the lock.
We retain the two step setup of the default domain for the
bus_iommu_probe() case solely so that we have a more complete view of the
group when creating the default domain for boot time devices. This is not
generally necessary with the current code structure but seems to be
supporting some odd corner cases like alias RID's and IOMMU_RESV_DIRECT or
driver bugs returning different default_domain types for the same group.
During bus_iommu_probe() the group will have a device list but both
group->default_domain and group->domain will be NULL.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/10-v3-328044aa278c+45e49-iommu_probe_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Move the list_add_tail() for the group_device into the critical region
that immediately follows in __iommu_probe_device(). This avoids one case
of unlocking and immediately re-locking the group->mutex.
Consistently make the caller responsible for setting dev->iommu_group,
prior patches moved this into iommu_init_device(), make the no-driver path
do this in iommu_group_add_device().
This completes making __iommu_group_free_device() and
iommu_group_alloc_device() into pair'd functions.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/9-v3-328044aa278c+45e49-iommu_probe_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Have release fully clean up the iommu related parts of the struct device,
no matter what state they are in.
Split the logic so that the three things owned by the iommu core are
always cleaned up:
- Any attached iommu_group
- Any allocated dev->iommu and its contents including a fwsepc
- Any attached driver via a struct group_device
This fixes a minor bug where a fwspec created without an iommu_group being
probed would not be freed.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/8-v3-328044aa278c+45e49-iommu_probe_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
These are not used outside iommu.c, they should not be available to
modular code.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/7-v3-328044aa278c+45e49-iommu_probe_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
It makes logical sense that once the driver is attached to the device the
sysfs links appear, even if we haven't fully created the group_device or
attached the device to a domain.
Fix the missing error handling on sysfs creation since
iommu_init_device() can trivially handle this.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v3-328044aa278c+45e49-iommu_probe_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Move the driver init and destruction code into two logically paired
functions.
There is a subtle ordering dependency in how the group's domains are
freed, the current code does the kobject_put() on the group which will
hopefully trigger the free of the domains before the module_put() that
protects the domain->ops.
Reorganize this to be explicit and documented. The domains are cleaned up
by iommu_deinit_device() if it is the last device to be deinit'd from the
group. This must be done in a specific order - after
ops->release_device() and before the module_put(). Make it very clear and
obvious by putting the order directly in one function.
Leave WARN_ON's in case the refcounting gets messed up somehow.
This also moves the module_put() and dev_iommu_free() under the
group->mutex to keep the code simple.
Building paired functions like this helps ensure that error cleanup flows
in __iommu_probe_device() are correct because they share the same code
that handles the normal flow. These details become relavent as following
patches add more error unwind into __iommu_probe_device(), and ultimately
a following series adds fine-grained locking to __iommu_probe_device().
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v3-328044aa278c+45e49-iommu_probe_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Instead of returning the struct group_device and then later freeing it, do
the entire free under the group->mutex and defer only putting the
iommu_group.
It is safe to remove the sysfs_links and free memory while holding that
mutex.
Move the sanity assert of the group status into
__iommu_group_free_device().
The next patch will improve upon this and consolidate the group put and
the mutex into __iommu_group_remove_device().
__iommu_group_free_device() is close to being the paired undo of
iommu_group_add_device(), following patches will improve on that.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v3-328044aa278c+45e49-iommu_probe_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This is the only caller, and it doesn't need the generality of the
function. We already know there is no iommu_group, so it is simply two
function calls.
Moving it here allows the following patches to split the logic in these
functions.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v3-328044aa278c+45e49-iommu_probe_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
No reason to open code this, use the proper helper functions.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v3-328044aa278c+45e49-iommu_probe_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This is a step toward making __iommu_probe_device() self contained.
It should, under proper locking, check if the device is already associated
with an iommu driver and resolve parallel probes. All but one of the
callers open code this test using two different means, but they all
rely on dev->iommu_group.
Currently the bus_iommu_probe()/probe_iommu_group() and
probe_acpi_namespace_devices() rejects already probed devices with an
unlocked read of dev->iommu_group. The OF and ACPI "replay" functions use
device_iommu_mapped() which is the same read without the pointless
refcount.
Move this test into __iommu_probe_device() and put it under the
iommu_probe_device_lock. The store to dev->iommu_group is in
iommu_group_add_device() which is also called under this lock for iommu
driver devices, making it properly locked.
The only path that didn't have this check is the hotplug path triggered by
BUS_NOTIFY_ADD_DEVICE. The only way to get dev->iommu_group assigned
outside the probe path is via iommu_group_add_device(). Today the only
caller is VFIO no-iommu which never associates with an iommu driver. Thus
adding this additional check is safe.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v3-328044aa278c+45e49-iommu_probe_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Fix the axes and add home button support as suggested by Hans de Goede.
Signed-off-by: Thomas GENTY <tomlohave@gmail.com>
Link: https://lore.kernel.org/r/20230714105117.192938-1-tomlohave@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The Documentation/process/deprecated.rst suggests to use flexible array
members to provide a way to declare having a dynamically sized set of
trailing elements in a structure.This makes code robust agains bunch of
the issues described in the documentation, main of which is about the
correctness of the sizeof() calculation for this data structure.
Due to above, prefer struct_size() over open-coded versions.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230714091748.89681-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
BITS_TO_BYTES() is the existing macro which takes care about full
bytes that may fully hold the given amount of bits. Use it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230714091748.89681-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now, spi_add_device_locked() has just a line on top of __spi_add_device().
Besides that, it has a single caller. So, just kill it and embed its parts
into the caller.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230714091748.89681-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The commit 0c79378c01 ("spi: add ancillary device support")
added a dozen of duplicating lines of code. We may move them
to the __spi_add_device(). Note, that the code may be called
under the mutex.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230714091748.89681-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The internal analog power and hp Vref of es8326 should always be on to
reduce pop noise. The HP_VOL and HP_CAL are moved to es8326_mute function
so they are turned on at last and turned off at first.
Also, the calibration should be done manually once during start-up
to reduce DC offset on headphone.
Signed-off-by: Zhu Ning <zhuning0077@gmail.com>
Link: https://lore.kernel.org/r/20230714032453.3334-1-zhuning0077@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the class-D internal register setting during initialization
to be compatible with most speaker designs to avoid noise.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20230712062553.31066-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To get the changes in:
e910baa9c1 ("KVM: arm64: vgic: Add Apple M2 PRO/MAX cpus to the list of broken SEIS implementations")
That makes this perf source code to be rebuilt:
CC /tmp/build/perf-tools/util/arm-spe.o
The changes in the above patch don't affect things that are used in
arm-spe.c (things like MIDR_NEOVERSE_N1, etc). Unsure if Apple M2 has
SPE (Statistical Profiling Extension) :-)
That addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a driver for Schweitzer Engineering Laboratories SEL-3350 computers
front LEDs and power supplies. LED and power supply status is provided
by the Intel SoC GPIO.
Signed-off-by: Robert Joslyn <robert.joslyn@redrectangle.org>
Link: https://lore.kernel.org/r/20230713035714.807819-1-robert.joslyn@redrectangle.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add debugfs interface for debugging TPMI configuration and register
contents. This shows PFS (PM Feature structure) for each TPMI device.
For each feature, show full register contents and allow to modify
register at an offset.
This debugfs interface is not present on locked down kernel with no
DEVMEM access and without CAP_SYS_RAWIO permission.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230712225950.171326-3-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Some of the PM features can be locked or disabled. In that case, write
interface can be locked.
This status is read via a mailbox. There is one TPMI ID which provides
base address for interface and data register for mail box operation.
The mailbox operations is defined in the TPMI specification. Refer to
https://github.com/intel/tpmi_power_management/ for TPMI specifications.
An API is exposed to feature drivers to read feature control status.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230712225950.171326-2-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
v6.5-rc1 + recent pdx86 simatic-ipc patches for
merging into the LED subsystem for v6.6.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmSxSdMUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9xdyAf9HQ841da0W+ZQCxgcltLZtd5cyLbp
HC1VcjjkA/xLzFpKQOAT3fXijxGWprI8nbzAnA1UT1qqy2dn6Q31OarZ/ubraQvs
kQxCPV2HBXMlYeTktRbvvnHRSHE/dvqzEYY1Ktk1+fEqJvCwrw5E7Zig2Y9Vj+J2
KMTvXuSgImY18mgWaX0aUDnxV2M7vVmgvctxiW2MZyJ7oaz2rnv8jDc9Trpr5oBj
MJzuGp9JhVDCcUsEMpuyx6DdejOoxEQ/pL30faYEqzTu/dBFRqkt7ACyODdeFfdT
mx3kcE8um9Z/qKf6vsEh4kpEPMA4vTDlVBxBRwwpUTADOZrypV0/FPPoEg==
=0t7p
-----END PGP SIGNATURE-----
Merge tag 'ib-pdx86-simatic-v6.6' into review-hans
Immutable branch between pdx86 simatic branch and LED due for the v6.6 merge window
v6.5-rc1 + recent pdx86 simatic-ipc patches for
merging into the LED subsystem for v6.6.
We recently introduced a way to name additional modules to load for each
device. Use that instead of wdtmode to load the watchdog module. This
patch does not change behaviour, it is just style.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Link: https://lore.kernel.org/r/20230713144832.26473-4-henning.schild@siemens.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
In order to know which hwmon modules to load one would have to usually
first probe from user-land i.e. with sensors-detect and create a config
for each machine. But here we know exactly what machines we are dealing
with, so we can request those howmon modules without user-mode detection
and config files.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Link: https://lore.kernel.org/r/20230713144832.26473-3-henning.schild@siemens.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This is the panel variant of a device we already did have. All the same,
just no LEDs.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Link: https://lore.kernel.org/r/20230713144832.26473-2-henning.schild@siemens.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
We do not use PCI any longer since
commit 446f0cf9e0 ("platform/x86: simatic-ipc: drop custom P2SB bar code")'
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Link: https://lore.kernel.org/r/20230706161040.21152-2-henning.schild@siemens.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Siemens Simatic Industrial PCs can monitor the voltage of the CMOS
battery with two bits that indicate low or empty state. This can be GPIO
or PortIO based.
Here we model that as a hwmon voltage. The core driver does the PortIO
and provides boilerplate for the GPIO versions. Which are split out to
model runtime dependencies while allowing fine-grained kernel
configuration.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230706154831.19100-3-henning.schild@siemens.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
To pick the changes in:
b848b26c66 ("net: Kill MSG_SENDPAGE_NOTLAST")
5e2ff6704a ("scm: add SO_PASSPIDFD and SCM_PIDFD")
4fe38acdac ("net: Block MSG_SENDPAGE_* from being passed to sendmsg() by userspace")
b841b901c4 ("net: Declare MSG_SPLICE_PAGES internal sendmsg() flag")
That don't result in any changes in the tables generated from that
header.
But while updating I noticed we were not handling MSG_BATCH and MSG_ZEROCOPY in the
hard coded table for the msg flags table, add them.
This silences this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Mikhalitsyn <alexander@mihalicyn.com>
Cc: David Howells <dhowells@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZLFGuHDwUGDGXdoR@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the parent node is not a syscon type, then fallback and check
if we can get a regmap from our own node. This no longer forces
us to make the parent of this node a syscon node when that might
not be appropriate.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20230713200957.134480-1-afd@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The ida_alloc_range() function returns negative error codes on error.
On success it returns values in the min to max range (inclusive). It
never returns more then INT_MAX even if "max" is higher. It never
returns values in the 0 to (min - 1) range.
The bug is that "min" is an unsigned int so negative error codes will
be promoted to high positive values errors treated as success.
Fixes: 1a14bf0fc7 ("iommu/sva: Use GFP_KERNEL for pasid allocation")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/6b32095d-7491-4ebb-a850-12e96209eaaf@kili.mountain
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If fwnode_graph_get_remote_endpoint() fails, 'fwnode' is known to be NULL,
so fwnode_handle_put() is a no-op.
Release the reference taken from a previous fwnode_graph_get_port_parent()
call instead.
Also handle fwnode_graph_get_port_parent() failures.
In order to fix these issues, add an error handling path to the function
and the needed gotos.
Fixes: ca50c197bd ("[media] v4l: fwnode: Support generic fwnode for parsing standardised properties")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add driver for TI DS90UB953 FPD-Link III Serializer.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add driver for TI DS90UB913 FPD-Link III Serializer.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add driver for TI DS90UB960 FPD-Link III Deserializer.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add DT bindings for TI DS90UB960 FPD-Link III Deserializer.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add DT bindings for TI DS90UB953 FPD-Link III Serializer.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add DT bindings for TI DS90UB913 FPD-Link III Serializer.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
An ATR is a device that looks similar to an i2c-mux: it has an I2C
slave "upstream" port and N master "downstream" ports, and forwards
transactions from upstream to the appropriate downstream port. But it
is different in that the forwarded transaction has a different slave
address. The address used on the upstream bus is called the "alias"
and is (potentially) different from the physical slave address of the
downstream chip.
Add a helper file (just like i2c-mux.c for a mux or switch) to allow
implementing ATR features in a device driver. The helper takes care of
adapter creation/destruction and translates addresses at each transaction.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>