As per NVMe command set specification 1.0c Storage tag size is 7 bits.
Fixes: 4020aad85c ("nvme: add support for enhanced metadata")
Signed-off-by: Ankit Kumar <ankit.kumar@samsung.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The insertion of an empty frame was introduced with
commit db0b124f02 ("igc: Enhance Qbv scheduling by using first flag bit")
in order to ensure that the current cycle has at least one packet if
there is some packet to be scheduled for the next cycle.
However, the current implementation does not properly check if
a packet is already scheduled for the current cycle. Currently,
an empty packet is always inserted if and only if
txtime >= end_of_cycle && txtime > last_tx_cycle
but since last_tx_cycle is always either the end of the current
cycle (end_of_cycle) or the end of a previous cycle, the
second part (txtime > last_tx_cycle) is always true unless
txtime == last_tx_cycle.
What actually needs to be checked here is if the last_tx_cycle
was already written within the current cycle, so an empty frame
should only be inserted if and only if
txtime >= end_of_cycle && end_of_cycle > last_tx_cycle.
This patch does not only avoid an unnecessary insertion, but it
can actually be harmful to insert an empty packet if packets
are already scheduled in the current cycle, because it can lead
to a situation where the empty packet is actually processed
as the first packet in the upcoming cycle shifting the packet
with the first_flag even one cycle into the future, finally leading
to a TX hang.
The TX hang can be reproduced on a i225 with:
sudo tc qdisc replace dev enp1s0 parent root handle 100 taprio \
num_tc 1 \
map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \
queues 1@0 \
base-time 0 \
sched-entry S 01 300000 \
flags 0x1 \
txtime-delay 500000 \
clockid CLOCK_TAI
sudo tc qdisc replace dev enp1s0 parent 100:1 etf \
clockid CLOCK_TAI \
delta 500000 \
offload \
skip_sock_check
and traffic generator
sudo trafgen -i traffic.cfg -o enp1s0 --cpp -n0 -q -t1400ns
with traffic.cfg
#define ETH_P_IP 0x0800
{
/* Ethernet Header */
0x30, 0x1f, 0x9a, 0xd0, 0xf0, 0x0e, # MAC Dest - adapt as needed
0x24, 0x5e, 0xbe, 0x57, 0x2e, 0x36, # MAC Src - adapt as needed
const16(ETH_P_IP),
/* IPv4 Header */
0b01000101, 0, # IPv4 version, IHL, TOS
const16(1028), # IPv4 total length (UDP length + 20 bytes (IP header))
const16(2), # IPv4 ident
0b01000000, 0, # IPv4 flags, fragmentation off
64, # IPv4 TTL
17, # Protocol UDP
csumip(14, 33), # IPv4 checksum
/* UDP Header */
10, 0, 48, 1, # IP Src - adapt as needed
10, 0, 48, 10, # IP Dest - adapt as needed
const16(5555), # UDP Src Port
const16(6666), # UDP Dest Port
const16(1008), # UDP length (UDP header 8 bytes + payload length)
csumudp(14, 34), # UDP checksum
/* Payload */
fill('W', 1000),
}
and the observed message with that is for example
igc 0000:01:00.0 enp1s0: Detected Tx Unit Hang
Tx Queue <0>
TDH <32>
TDT <3c>
next_to_use <3c>
next_to_clean <32>
buffer_info[next_to_clean]
time_stamp <ffff26a8>
next_to_watch <00000000632a1828>
jiffies <ffff27f8>
desc.status <1048000>
Fixes: db0b124f02 ("igc: Enhance Qbv scheduling by using first flag bit")
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
It is possible (verified on a running system) that frames are processed
by igc_tx_launchtime with a txtime before the start of the cycle
(baset_est).
However, the result of txtime - baset_est is written into a u32,
leading to a wrap around to a positive number. The following
launchtime > 0 check will only branch to executing launchtime = 0
if launchtime is already 0.
Fix it by using a s32 before checking launchtime > 0.
Fixes: db0b124f02 ("igc: Enhance Qbv scheduling by using first flag bit")
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The flags IGC_TXQCTL_STRICT_CYCLE and IGC_TXQCTL_STRICT_END
prevent the packet transmission over slot and cycle boundaries.
This is important for taprio offload where the slots and
cycles correspond to the slots and cycles configured for the
network.
However, the Qbv offload feature of the i225 is also used for
enabling TX launchtime / ETF offload. In that case, however,
the cycle has no meaning for the network and is only used
internally to adapt the base time register after a second has
passed.
Enabling strict mode in this case would unnecessarily prevent
the transmission of certain packets (i.e. at the boundary of a
second) and thus interferes with the ETF qdisc that promises
transmission at a certain point in time.
Similar to ETF, this also applies to CBS offload that also should
not be influenced by strict mode unless taprio offload would be
enabled at the same time.
This fully reverts
commit d8f45be01d ("igc: Use strict cycles for Qbv scheduling")
but its commit message only describes what was already implemented
before that commit. The difference to a plain revert of that commit
is that it now copes with the base_time = 0 case that was fixed with
commit e17090eb24 ("igc: allow BaseTime 0 enrollment for Qbv")
In particular, enabling strict mode leads to TX hang situations
under high traffic if taprio is applied WITHOUT taprio offload
but WITH ETF offload, e.g. as in
sudo tc qdisc replace dev enp1s0 parent root handle 100 taprio \
num_tc 1 \
map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \
queues 1@0 \
base-time 0 \
sched-entry S 01 300000 \
flags 0x1 \
txtime-delay 500000 \
clockid CLOCK_TAI
sudo tc qdisc replace dev enp1s0 parent 100:1 etf \
clockid CLOCK_TAI \
delta 500000 \
offload \
skip_sock_check
and traffic generator
sudo trafgen -i traffic.cfg -o enp1s0 --cpp -n0 -q -t1400ns
with traffic.cfg
#define ETH_P_IP 0x0800
{
/* Ethernet Header */
0x30, 0x1f, 0x9a, 0xd0, 0xf0, 0x0e, # MAC Dest - adapt as needed
0x24, 0x5e, 0xbe, 0x57, 0x2e, 0x36, # MAC Src - adapt as needed
const16(ETH_P_IP),
/* IPv4 Header */
0b01000101, 0, # IPv4 version, IHL, TOS
const16(1028), # IPv4 total length (UDP length + 20 bytes (IP header))
const16(2), # IPv4 ident
0b01000000, 0, # IPv4 flags, fragmentation off
64, # IPv4 TTL
17, # Protocol UDP
csumip(14, 33), # IPv4 checksum
/* UDP Header */
10, 0, 48, 1, # IP Src - adapt as needed
10, 0, 48, 10, # IP Dest - adapt as needed
const16(5555), # UDP Src Port
const16(6666), # UDP Dest Port
const16(1008), # UDP length (UDP header 8 bytes + payload length)
csumudp(14, 34), # UDP checksum
/* Payload */
fill('W', 1000),
}
and the observed message with that is for example
igc 0000:01:00.0 enp1s0: Detected Tx Unit Hang
Tx Queue <0>
TDH <d0>
TDT <f0>
next_to_use <f0>
next_to_clean <d0>
buffer_info[next_to_clean]
time_stamp <ffff661f>
next_to_watch <00000000245a4efb>
jiffies <ffff6e48>
desc.status <1048000>
Fixes: d8f45be01d ("igc: Use strict cycles for Qbv scheduling")
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
it is assigned first, so it does not need to initialize the assignment.
Link: https://lore.kernel.org/all/20230711185353.3218-1-zeming@nfschina.com/
Signed-off-by: Li zeming <zeming@nfschina.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
The 'correct_ret_addr' pointer is always set in the later code, no need
to initialize it at definition time.
Link: https://lore.kernel.org/all/20230704194359.3124-1-zeming@nfschina.com/
Signed-off-by: Li zeming <zeming@nfschina.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Replace occurences of the pattern "PAGE_SHIFT - 9" in the passthru and
loop targets with PAGE_SECTORS_SHIFT.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The enable_trace_eprobe() function enables all event probes, attached
to given trace probe. If an error occurs in enabling one of the event
probes, all others should be roll backed. There is a bug in that roll
back logic - instead of all event probes, only the failed one is
disabled.
Link: https://lore.kernel.org/all/20230703042853.1427493-1-tz.stoyanov@gmail.com/
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 7491e2c442 ("tracing: Add a probe that attaches to trace events")
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Add the quirk as SM953 is reporting bogus namespace ID.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217593
Reported-by: Clemens Springsguth <cspringsguth@gmail.com>
Tested-by: Clemens Springsguth <cspringsguth@gmail.com>
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Since commit e17090eb24 ("igc: allow BaseTime 0 enrollment for Qbv")
it is possible to enable taprio offload with a basetime of 0.
However, the check if taprio offload is already enabled (and thus -EALREADY
should be returned for igc_save_qbv_schedule) still relied on
adapter->base_time > 0.
This can be reproduced as follows:
# TAPRIO offload (flags == 0x2) and base-time = 0
sudo tc qdisc replace dev enp1s0 parent root handle 100 stab overhead 24 taprio \
num_tc 1 \
map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \
queues 1@0 \
base-time 0 \
sched-entry S 01 300000 \
flags 0x2
# The second call should fail with "Error: Device failed to setup taprio offload."
# But that only happens if base-time was != 0
sudo tc qdisc replace dev enp1s0 parent root handle 100 stab overhead 24 taprio \
num_tc 1 \
map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \
queues 1@0 \
base-time 0 \
sched-entry S 01 300000 \
flags 0x2
Fixes: e17090eb24 ("igc: allow BaseTime 0 enrollment for Qbv")
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Only set adapter->taprio_offload_enable after validating the arguments.
Otherwise, it stays set even if the offload was not enabled.
Since the subsequent code does not get executed in case of invalid
arguments, it will not be read at first.
However, by activating and then deactivating another offload
(e.g. ETF/TX launchtime offload), taprio_offload_enable is read
and erroneously keeps the offload feature of the NIC enabled.
This can be reproduced as follows:
# TAPRIO offload (flags == 0x2) and negative base-time leading to expected -ERANGE
sudo tc qdisc replace dev enp1s0 parent root handle 100 stab overhead 24 taprio \
num_tc 1 \
map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \
queues 1@0 \
base-time -1000 \
sched-entry S 01 300000 \
flags 0x2
# IGC_TQAVCTRL is 0x0 as expected (iomem=relaxed for reading register)
sudo pcimem /sys/bus/pci/devices/0000:01:00.0/resource0 0x3570 w*1
# Activate ETF offload
sudo tc qdisc replace dev enp1s0 parent root handle 6666 mqprio \
num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
queues 1@0 1@1 2@2 \
hw 0
sudo tc qdisc add dev enp1s0 parent 6666:1 etf \
clockid CLOCK_TAI \
delta 500000 \
offload
# IGC_TQAVCTRL is 0x9 as expected
sudo pcimem /sys/bus/pci/devices/0000:01:00.0/resource0 0x3570 w*1
# Deactivate ETF offload again
sudo tc qdisc delete dev enp1s0 parent 6666:1
# IGC_TQAVCTRL should now be 0x0 again, but is observed as 0x9
sudo pcimem /sys/bus/pci/devices/0000:01:00.0/resource0 0x3570 w*1
Fixes: e17090eb24 ("igc: allow BaseTime 0 enrollment for Qbv")
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In the current implementation the flags adapter->qbv_enable
and IGC_FLAG_TSN_QBV_ENABLED have a similar name, but do not
have the same meaning. The first one is used only to indicate
taprio offload (i.e. when igc_save_qbv_schedule was called),
while the second one corresponds to the Qbv mode of the hardware.
However, the second one is also used to support the TX launchtime
feature, i.e. ETF qdisc offload. This leads to situations where
adapter->qbv_enable is false, but the flag IGC_FLAG_TSN_QBV_ENABLED
is set. This is prone to confusion.
The rename should reduce this confusion. Since it is a pure
rename, it has no impact on functionality.
Fixes: e17090eb24 ("igc: allow BaseTime 0 enrollment for Qbv")
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
If defer close timeout value is set to 0, then there is no
need to include files in the deferred close list and utilize
the delayed worker for closing. Instead, we can close them
immediately.
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Delay release TTM BOs when the kernel default setting is init_on_free.
This offloads the overhead of clearing the system memory to the work
item and potentially a different CPU. This could be very beneficial when
the application does a lot of malloc/free style allocations of system
memory.
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>.
Link: https://patchwork.freedesktop.org/patch/msgid/20230708011355.853-1-rajneesh.bhardwaj@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
On s390 systems (aka mainframes), it has classic channel devices for
networking and permanent storage that are currently even more common
than PCI devices. Hence it could have a fully functional s390 kernel
with CONFIG_PCI=n, then the relevant iomem mapping functions
[including ioremap(), devm_ioremap(), etc.] are not available.
In LKP error report at below on s390:
------
ld: kernel/dma/coherent.o: in function `dma_init_coherent_memory':
coherent.c:(.text+0x102): undefined reference to `memremap'
ld: coherent.c:(.text+0x226): undefined reference to `memunmap'
ld: kernel/dma/coherent.o: in function `dma_declare_coherent_memory':
coherent.c:(.text+0x8b8): undefined reference to `memunmap'
ld: kernel/dma/coherent.o: in function `dma_release_coherent_memory':
coherent.c:(.text+0x9aa): undefined reference to `memunmap'
------
In the config file, several Kconfig options are:
------
'# CONFIG_PCI is not set'
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_DMA_DECLARE_COHERENT=y
------
So, enabling OF_EARLY_FLATTREE will select DMA_DECLARE_COHERENT
and cause above building errors even though they are not needed
because CONFIG_PCI is disabled.
Here let OF_EARLY_FLATTREE depend on HAS_IOMEM so that it won't
be built to cause compiling error if PCI is unset.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306211329.ticOJCSv-lkp@intel.com/
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20230707135852.24292-9-bhe@redhat.com
Signed-off-by: Rob Herring <robh@kernel.org>
CFG_STM32MP1_SCMI_SHM_SYSRAM will be disabled by default for STM32MP13x
SoCs in future OP-TEE version and the OP-TEE SMCI server uses only
the OP-TEE native shared memory registered by clients.
To be compatible by default with this configuration this patch removes
the shared memory in the SCMI configuration and the associated reserved
memory in SRAM.
Fixes: 9005aeddd9fc ("ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP13")
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Since the OP-TEE commit "plat-stm32mp1: scmi_server: default use OP-TEE
shared memory", integrated in OP-TEE 3.22.0-rc1, the default configuration
for STM32MP15x SoCs changes and CFG_STM32MP1_SCMI_SHM_SYSRAM is disabled
by default and the OP-TEE SMCI server uses OP-TEE native shared memory
registered by clients.
To be compatible with this configuration and the next OP-TEE versions,
this patch removes in the STM32MP15 SCMI device tree the SHMEM used by
OP-TEE SCMI and the associated reserved memory in the last 4KByte page
of SRAM.
Fixes: ea3414e1249e ("ARM: dts: stm32: move SCMI related nodes in a dedicated file for stm32mp15")
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
There is some instablity with some eMMC modules on ROCK Pi 4 SBCs running
in HS400 mode. This ends up resulting in some block errors after a while
or after a "heavy" operation utilising the eMMC (e.g. resizing a
filesystem). An example of these errors is as follows:
[ 289.171014] mmc1: running CQE recovery
[ 290.048972] mmc1: running CQE recovery
[ 290.054834] mmc1: running CQE recovery
[ 290.060817] mmc1: running CQE recovery
[ 290.061337] blk_update_request: I/O error, dev mmcblk1, sector 1411072 op 0x1:(WRITE) flags 0x800 phys_seg 36 prio class 0
[ 290.061370] EXT4-fs warning (device mmcblk1p1): ext4_end_bio:348: I/O error 10 writing to inode 29547 starting block 176466)
[ 290.061484] Buffer I/O error on device mmcblk1p1, logical block 172288
[ 290.061531] Buffer I/O error on device mmcblk1p1, logical block 172289
[ 290.061551] Buffer I/O error on device mmcblk1p1, logical block 172290
[ 290.061574] Buffer I/O error on device mmcblk1p1, logical block 172291
[ 290.061592] Buffer I/O error on device mmcblk1p1, logical block 172292
[ 290.061615] Buffer I/O error on device mmcblk1p1, logical block 172293
[ 290.061632] Buffer I/O error on device mmcblk1p1, logical block 172294
[ 290.061654] Buffer I/O error on device mmcblk1p1, logical block 172295
[ 290.061673] Buffer I/O error on device mmcblk1p1, logical block 172296
[ 290.061695] Buffer I/O error on device mmcblk1p1, logical block 172297
Disabling the Command Queue seems to stop the CQE recovery from running,
but doesn't seem to improve the I/O errors. Until this can be investigated
further, disable HS400 mode on the ROCK Pi 4 SBCs to at least stop I/O
errors from occurring.
Fixes: 246450344d ("arm64: dts: rockchip: rk3399: Radxa ROCK 4C+")
Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Link: https://lore.kernel.org/r/20230705144255.115299-3-chris.obbard@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
There is some instablity with some eMMC modules on ROCK Pi 4 SBCs running
in HS400 mode. This ends up resulting in some block errors after a while
or after a "heavy" operation utilising the eMMC (e.g. resizing a
filesystem). An example of these errors is as follows:
[ 289.171014] mmc1: running CQE recovery
[ 290.048972] mmc1: running CQE recovery
[ 290.054834] mmc1: running CQE recovery
[ 290.060817] mmc1: running CQE recovery
[ 290.061337] blk_update_request: I/O error, dev mmcblk1, sector 1411072 op 0x1:(WRITE) flags 0x800 phys_seg 36 prio class 0
[ 290.061370] EXT4-fs warning (device mmcblk1p1): ext4_end_bio:348: I/O error 10 writing to inode 29547 starting block 176466)
[ 290.061484] Buffer I/O error on device mmcblk1p1, logical block 172288
[ 290.061531] Buffer I/O error on device mmcblk1p1, logical block 172289
[ 290.061551] Buffer I/O error on device mmcblk1p1, logical block 172290
[ 290.061574] Buffer I/O error on device mmcblk1p1, logical block 172291
[ 290.061592] Buffer I/O error on device mmcblk1p1, logical block 172292
[ 290.061615] Buffer I/O error on device mmcblk1p1, logical block 172293
[ 290.061632] Buffer I/O error on device mmcblk1p1, logical block 172294
[ 290.061654] Buffer I/O error on device mmcblk1p1, logical block 172295
[ 290.061673] Buffer I/O error on device mmcblk1p1, logical block 172296
[ 290.061695] Buffer I/O error on device mmcblk1p1, logical block 172297
Disabling the Command Queue seems to stop the CQE recovery from running,
but doesn't seem to improve the I/O errors. Until this can be investigated
further, disable HS400 mode on the ROCK Pi 4 SBCs to at least stop I/O
errors from occurring.
While we are here, set the eMMC maximum clock frequency to 1.5MHz to
follow the ROCK 4C+.
Fixes: 1b5715c602 ("arm64: dts: rockchip: add ROCK Pi 4 DTS support")
Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Tested-By: Folker Schwesinger <dev@folker-schwesinger.de>
Link: https://lore.kernel.org/r/20230705144255.115299-2-chris.obbard@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning: GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE.
Correct the interrupt flags, assuming the author of the code wanted same
logical behavior behind the name "ACTIVE_xxx", this is:
ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230707063335.13317-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning: GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE.
Correct the interrupt flags, assuming the author of the code wanted same
logical behavior behind the name "ACTIVE_xxx", this is:
ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Link: https://lore.kernel.org/r/20230707063335.13317-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning: GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE.
Correct the interrupt flags, assuming the author of the code wanted same
logical behavior behind the name "ACTIVE_xxx", this is:
ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230707063335.13317-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The audio-graph-card driver uses the 'label' property to register the
sound card in the system, but the currently assigned string is too
generic and cannot be supported by alsa-project/alsa-ucm-conf:
card 0: Analog [Analog]
Use the more specific naming "rk3588-es8316", which is still generic
enough to be shared with other compatible boards, e.g. Rock 5A. The
audio card will be listed as:
card 0: rk3588es8316 [rk3588-es8316]
While at it, update also the DT node name, as there will be additional
sound related nodes available, i.e. for HDMI. Note that this involves
moving the node one position up, to preserve the alphabetical order.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230707162822.676024-1-cristian.ciocaltea@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
smatch reports
drivers/platform/x86/intel/int3472/clk_and_regulator.c:263:28: warning: symbol
'skl_int3472_regulator_second_sensor' was not declared. Should it be static?
This variable is only used in its defining file, so it should be static.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230702134419.3438361-1-trix@redhat.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
ACPICA commit c71a12dfc66593fa9730c62a519161c4a7fca9f6
remove SEEK_SET/SEEK_END duplicate macro on zephyr header which through
error while run zephyr CI jobs.
Link: c71a12df
Signed-off-by: Najumon B.A <najumon.ba@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit a597e3b247df72aec0f6e056c95abe2d973ac10c
Link: a597e3b2
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 2250f71fe77396db21df805222ffcbf19e1e7896
Make the code simpler and more readable.
Link: 2250f71f
Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 0a43d3521582b5234f69e8bb535e83325387525a
Avoid trailing semicolons in macro, and it's not readable to put macro ACPI_STATE_COMMON and other
variables in the same line.
So modify the macro and just put it in a single line.
Link: 0a43d352
Signed-off-by: George Guo <guodongtai@kylinos.cn>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit aea0a5cfce262ce2ab16fd96d87c12cf5e756380
We're storing a persistent pointer to an ephemeral local variable
which technically is a dangling pointer and the compiler is correct.
However, since we never indirect the pointer, this is a safe
operation and we can suppress the warning.
Also, some C run-times (like MUSL) aren't including <stdint.h>
indirectly so we must include it explicitly or we won't have the
type definition for uintptr_t.
Fixes issue #867.
Link: aea0a5cf
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
cap_offset is a u16 field, so multiplying with TPMI_CAP_OFFSET_UNIT
(which is equal to 1024) to covert to bytes will cause overflow. This
will be a problem once more TPMI features are added.
This field is not used except for calculating pfs->vsec_offset. So, leave
cap_offset field unchanged and multiply with TPMI_CAP_OFFSET_UNIT while
calculating pfs->vsec_offset.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20230622195717.3125088-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The commit in Fixes has introduced some "enum p9_session_flags" values
larger than a char.
Such values are stored in "v9fs_session_info->flags" which is a char only.
Turn it into an int so that the "enum p9_session_flags" values can fit in
it.
Fixes: 6deffc8924 ("fs/9p: Add new mount modes")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Dominique Martinet <asmadeus@codewreck.org>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Fix the below checkpatch errors & warnings:
ERROR: that open brace { should be on the previous line
ERROR: space prohibited before that ',' (ctx:WxV)
ERROR: space required after that ',' (ctx:WxV)
ERROR: code indent should use tabs where possible
ERROR: switch and case should be at the same indent
WARNING: please, no spaces at the start of a line
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: space prohibited before semicolon
WARNING: Block comments use a trailing */ on a separate line
WARNING: Block comments use * on subsequent lines
WARNING: braces {} are not necessary for any arm of this statement
WARNING: Missing a blank line after declarations
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the below checkpatch warnings:
WARNING: static const char * array should probably be static const char * const
+static const char *gfxhub_client_ids[] = {
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
+ unsigned i;
WARNING: static const char * array should probably be static const char * const
+static const char *gfxhub_client_ids[] = {
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
+ unsigned i;
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix below checkpatch warnings:
WARNING: braces {} are not necessary for single statement blocks
WARNING: braces {} are not necessary for any arm of this statement
WARNING: Block comments should align the * on each line
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In restore process worker, pinned BO cause update PTE fail, then
the function re-schedule the restore_work. This will generate dead loop.
Signed-off-by: gaba <gaba@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1:
the dceflck sysnode is not aviable on GFX v9.4.3 chip.
v2:
simplify code logic using helper function: amdgpu_device_has_display_hardware().
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Due to a coding typo.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix below checkpatch warnings:
WARNING: else is not generally useful after a break or return
+ return true;
+ } else {
WARNING: else is not generally useful after a break or return
+ return true;
+ } else {
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the smu driver_table is used for all types of smu
tables data transcation (e.g: PPtable, Metrics, i2c, Ecc..).
it is necessary to hold this lock to avoiding data tampering
during the i2c read operation.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix below checkpatch warnings:
WARNING: quoted string split across lines
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: void function return statements are not generally useful
WARNING: braces {} are not necessary for any arm of this statement
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix below checkpatch warnings:
WARNING: else is not generally useful after a break or return
+ return true;
+ } else {
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the below checkpatch warnings:
WARNING: static const char * array should probably be static const char * const
+static const char *gfxhub_client_ids[] = {
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
+ unsigned i;
WARNING: Missing a blank line after declarations
+ int i;
+ adev->gmc.VM_L2_CNTL = RREG32_SOC15(GC, 0, mmGCVM_L2_CNTL);
WARNING: Missing a blank line after declarations
+ int i;
+ WREG32_SOC15(GC, 0, mmGCVM_L2_CNTL, adev->gmc.VM_L2_CNTL);
WARNING: braces {} are not necessary for single statement blocks
+ if (!time) {
+ DRM_WARN("failed to wait for GRBM(EA) idle\n");
+ }
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix below checkpatch errors & warnings:
ERROR: trailing statements should be on next line
+ default: BUG();
ERROR: trailing statements should be on next line
WARNING: braces {} are not necessary for single statement blocks
WARNING: braces {} are not necessary for any arm of this statement
WARNING: Block comments use * on subsequent lines
WARNING: Missing a blank line after declarations
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix below checkpatch warnings:
WARNING: Consider removing the code enclosed by this #if 0 and its #endif
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: quoted string split across lines
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the below warning:
WARNING: Prefer [subsystem eg: netdev]_warn([subsystem]dev, ... then
dev_warn(dev, ... then pr_warn(... to printk(KERN_WARNING ...
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>