Depending on hardware implementaion of DWC I2S controller may support
TDM mode if enabled in SoC at design time.
Unfortunately there is no way to detect TDM capability for DWC by
reading registers. Anyway, if such capability enabled, TDM mode
can be enabled and configured by dai-tdm-slot-* DT options.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Link: https://lore.kernel.org/r/20230622200031.120168-1-fido_max@inbox.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
dlc->of_node will be set on snd_soc_get_dlc(), but we want
1) protect it by mutex, 2) set only when successed.
This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878rc1kerv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Different PCM devices may have different PCM hardware parameters. It
requires PCM hardware parameters set separately if there is more than
one rpmsg sound card.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230625065412.651870-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Required CPU/Codec/Platform dlc (snd_soc_dai_link_component) are similar
but not same, and very complex. Current implementation is very confusable
and it will be more complex if multi Component was supported.
This patch cleanup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o7l9blsn.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current snd_soc_get_dai_id() is initializing dlc *manually*,
but it will might be a problem if dlc had new extra parameter.
This patch uses default initialization, otherwise, non initialized
part will be strange value.
This is prepare for multi Component support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pm5pblst.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add compatible and use DID to check rt5733.
The only difference bwtween rt5733 and rt5739 is the output range and
voltage step. These two chips can be distinguished from the DIE id.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1688048996-25606-3-git-send-email-cy_huang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Modern Qualcomm SoCs have a REFGEN (reference voltage generator)
regulator, providing reference voltage to on-chip IP, like PHYs.
Add a driver to support toggling that regulator.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230628-topic-refgen-v3-2-9fbf0e605d23@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Modern Qualcomm SoCs have a REFGEN (reference voltage generator)
regulator, providing reference voltage to on-chip IP, like PHYs.
It's controlled through MMIO and we can toggle it or read its state back.
Describe it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230628-topic-refgen-v3-1-9fbf0e605d23@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
With unsigned int type we never ever can pass 64-bit value.
Remove never properly worked code.
Note, there are no users in kernel for this size of register
offsets or data.
This reverts commit afcc00b91f.
Also revert other 64-bit code excerpts in the regmap implementation
that had been induced by the false impression made by the above
mentioned change that there is a support of that data size.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230622183613.58762-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
An additional-devs subnode can be present in the simple-card top node.
This subnode is used to declared some "virtual" additional devices.
Create related devices from this subnode and avoid this subnode presence
to interfere with the already supported subnodes analysis.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230623085830.749991-14-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Industrial I/O devices can be present in the audio path.
These devices needs to be used as audio components in order to be
fully integrated in the audio path.
This support allows to consider these Industrial I/O devices as
auxiliary audio devices and allows one to control them using mixer
controls.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230623085830.749991-13-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SND_SOC_DAPM_* helpers family are used to build widgets array in a
static way.
Convert them to return a compound literal in order to use them in both
static and dynamic way.
With this conversion, the different SND_SOC_DAPM_* parameters can be
computed by the code and the widget can be built based on this parameter
computation.
static int create_widget(char *input_name)
{
struct snd_soc_dapm_widget widget;
char name*;
...
name = input_name;
if (!name)
name = "default";
widget = SND_SOC_DAPM_INPUT(name);
...
}
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230623085830.749991-12-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A helper, iio_read_max_channel_raw() exists to read the available
maximum raw value of a channel but nothing similar exists to read the
available minimum raw value.
This new helper, iio_read_min_channel_raw(), fills the hole and can be
used for reading the available minimum raw value of a channel.
It is fully based on the existing iio_read_max_channel_raw().
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230623085830.749991-11-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This FIXME comment is more a TODO one.
It is a note when someone will need for this currently unsupported case.
Change from FIXME to TODO.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230623085830.749991-10-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use max_array() to get the maximum value from an array instead of a
custom local loop.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230623085830.749991-9-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce min_array() (resp max_array()) in order to get the
minimal (resp maximum) of values present in an array.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230623085830.749991-8-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the mutex.h inclusion order as it seems to be the only one
misplaces.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230623085830.749991-7-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The code uses a local variable to initialize a null pointer in order to
avoid accessing this null pointer later on.
Simply removed the 'unused' variable and check for the null pointer just
before accessing it.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230623085830.749991-6-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The raw values notes mention 'ADC counts' and are not fully accurate.
Reword the notes in order to remove the 'ADC counts' and describe the
conversion needed between a raw value and a value in the standard units.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230623085830.749991-5-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current implementation returns the error code as part of the
default switch case.
This can lead to returning an incorrect positive value in case of
iio_avail_type enum entries evolution.
In order to avoid this case, be more strict in error checking.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230623085830.749991-4-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add acpi machine id's for vangogh platform and configure
driver data to enable SOF sound card support on newer boards.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://lore.kernel.org/r/20230707120730.1948445-4-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Extend the Vangogh machine driver to support a variant based on the
Nuvoton NAU88L21 Codec and the Analog Devices MAX98388 Speaker
Amplifier.
Additionally, enable probing via ACPI match table for this and future
hardware revisions.
Co-developed-by: Lucas Tanure <lucas.tanure@collabora.com>
Signed-off-by: Lucas Tanure <lucas.tanure@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230705214800.193244-4-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation for supporting ACPI probing, move DMI quirk handling
logic at the probe's top, to be able to return as quickly as possible in
case there is no DMI matching.
Additionally, simplify the code by replacing dmi_check_system() and
related callback with dmi_first_match(). While at it, also drop a few
unnecessary empty lines.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230705214800.193244-3-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The "acp5x_mach" string is provided for both driver name and
MODULE_ALIAS. Since they need to match, ensure DRV_NAME macro is used in
both locations.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230705214800.193244-2-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Export config_acp_dma() and config_pte_for_stream() functions.
These functions will be used to restore stream configuration during
system level resume.
Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Link: https://lore.kernel.org/r/20230626135515.1252063-8-Syed.SabaKareem@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Store the 'xfer_resolution' of the stream in private data structure,
it will be used to reprogram the xfer_resolution for the active stream
during system level resume.
Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Link: https://lore.kernel.org/r/20230626135515.1252063-7-Syed.SabaKareem@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>