Adds the required quirk to enable the Cirrus amp and correct pins
on the ASUS ROG G614J series which uses an SPI connected Cirrus amp.
While this works if the related _DSD properties are made available, these
aren't included in the ACPI of these laptops (yet).
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230704044619.19343-5-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adds the required quirk to enable the Cirrus amp and correct pins
on the ASUS ROG GA402X series which uses an I2C connected Cirrus amp.
While this works if the related _DSD properties are made available, these
aren't included in the ACPI of these laptops (yet).
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230704044619.19343-3-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adds the required quirk to enable the Cirrus amp and correct pins
on the ASUS ROG GV601V series which uses an I2C connected Cirrus amp.
While this works if the related _DSD properties are made available, these
aren't included in the ACPI of these laptops (yet).
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230704044619.19343-2-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit 456be42aa7.
The assumption VMEM_MAX_PHYS should match ident_map_size
is wrong. At least discontiguous saved segments (DCSS)
could be loaded at addresses beyond ident_map_size and
dcssblk device driver might fail as result.
Reported-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
During sampling event initialization, a check is done if that
particular CPU the event is to be installed on is actually online.
This check is not necessary, as it is also performed in the
system call entry point. Therefore remove this check.
No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The casts are written in two different notations:
(cast) expression
and
(cast)expression
Convert statements with the first notation to the second notation.
No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Remove debug_sprint_event() statement right after an pr_err()
statement. No additional debug information is generated.
No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The op argument is hardcoded in the parameter list of function pr_err.
Make the op code part of the text printed by pr_err.
No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Print the error message when the FAILURE flag is set.
This saves on pr_err statement as the text of the error message
is identical in both failures.
Also observe reverse Xmas tree variable declarations in this function.
No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Remove most debug statements which are not needed anymore from
the CPU Measurement counter facility device driver.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
First of all move PV-only ELF notes inside the XEN_PV conditional; note
that
- HV_START_LOW is dropped altogether, as it was meaningful for 32-bit PV
only,
- the 32-bit instance of VIRT_BASE is dropped, as it would be dead code
once inside the conditional,
- while PADDR_OFFSET is not exactly unused for PVH, it defaults to zero
there, and the hypervisor (or tool stack) complains if it is present
but VIRT_BASE isn't.
Then have the "supported features" note actually report reality: All
three of the features there are supported and/or applicable only in
certain cases.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/f99bacc6-2a2f-41b0-5c0b-e01b7051cb07@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Commit ae870a68b5 ("arm64/mm: Convert to using
lock_mm_and_find_vma()") made do_page_fault() to use 'vma' even if
CONFIG_PER_VMA_LOCK is not defined, but the declaration is still in the
ifdef.
As a result, building kernel without the config fails with undeclared
variable error as below:
arch/arm64/mm/fault.c: In function 'do_page_fault':
arch/arm64/mm/fault.c:624:2: error: 'vma' undeclared (first use in this function); did you mean 'vmap'?
624 | vma = lock_mm_and_find_vma(mm, addr, regs);
| ^~~
| vmap
Fix it by moving the declaration out of the ifdef.
Fixes: ae870a68b5 ("arm64/mm: Convert to using lock_mm_and_find_vma()")
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=kSeX
-----END PGP SIGNATURE-----
Merge tag 'block-6.5-2023-07-03' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
"Mostly items that came in a bit late for the initial pull request,
wanted to make sure they had the appropriate amount of linux-next soak
before going upstream.
Outside of stragglers, just generic fixes for either merge window
items, or longer standing bugs"
* tag 'block-6.5-2023-07-03' of git://git.kernel.dk/linux: (25 commits)
md/raid0: add discard support for the 'original' layout
nvme: disable controller on reset state failure
nvme: sync timeout work on failed reset
nvme: ensure unquiesce on teardown
cdrom/gdrom: Fix build error
nvme: improved uring polling
block: add request polling helper
nvme-mpath: fix I/O failure with EAGAIN when failing over I/O
nvme: host: fix command name spelling
blk-sysfs: add a new attr_group for blk_mq
blk-iocost: move wbt_enable/disable_default() out of spinlock
blk-wbt: cleanup rwb_enabled() and wbt_disabled()
blk-wbt: remove dead code to handle wbt enable/disable with io inflight
blk-wbt: don't create wbt sysfs entry if CONFIG_BLK_WBT is disabled
blk-mq: fix two misuses on RQF_USE_SCHED
blk-throttle: Fix io statistics for cgroup v1
bcache: Fix bcache device claiming
bcache: Alloc holder object before async registration
raid10: avoid spin_lock from fastpath from raid10_unplug()
md: fix 'delete_mutex' deadlock
...
-----BEGIN PGP SIGNATURE-----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=/j96
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.5-2023-07-03' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
"The fix for the msghdr->msg_inq assigned value being wrong, using -1
instead of -1U for the signed type.
Also a fix for ensuring when we're trying to run task_work on an
exiting task, that we wait for it. This is not really a correctness
thing as the work is being canceled, but it does help with ensuring
file descriptors are closed when the task has exited."
* tag 'io_uring-6.5-2023-07-03' of git://git.kernel.dk/linux:
io_uring: flush offloaded and delayed task_work on exit
io_uring: remove io_fallback_tw() forward declaration
io_uring/net: use proper value for msg_inq
* fix build warning with W=1
* drop error handling for debugfs
-----BEGIN PGP SIGNATURE-----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=nBDw
-----END PGP SIGNATURE-----
Merge tag 'hsi-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi
Pull HSI updates from Sebastian Reichel:
- fix build warning with W=1
- drop error handling for debugfs
* tag 'hsi-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
HSI: omap_ssi_port: Drop error checking for debugfs_create_dir
HSI: fix ssi_waketest() declaration
* Add new Qualcomm PMI8998/PM660 SMB2 charger
* bq256xx: support systems without thermistors
* cros_pchg: fix peripheral device status after system resume
* axp20x_usb_power: add support for AXP192
* qcom-pon: add support for pm8941
* at91-reset: prepare to expose reset reason to sysfs
* switch all I2C drivers back to use .probe instead of .probe_new
* convert some more DT bindings to YAML
* misc. cleanups
-----BEGIN PGP SIGNATURE-----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=9vtE
-----END PGP SIGNATURE-----
Merge tag 'for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
- Add new Qualcomm PMI8998/PM660 SMB2 charger
- bq256xx: support systems without thermistors
- cros_pchg: fix peripheral device status after system resume
- axp20x_usb_power: add support for AXP192
- qcom-pon: add support for pm8941
- at91-reset: prepare to expose reset reason to sysfs
- switch all I2C drivers back to use .probe instead of .probe_new
- convert some more DT bindings to YAML
- misc cleanups
* tag 'for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits)
MAINTAINERS: add documentation file for Microchip SAMA5D2 shutdown controller
dt-bindings: power: reset: atmel,sama5d2-shdwc: convert to yaml
dt-bindings: power: reset: atmel,at91sam9260-shdwc: convert to yaml
power: reset: at91-reset: change the power on reason prototype
power: reset: qcom-pon: add support for pm8941-pon
dt-bindings: power: reset: qcom-pon: define pm8941-pon
power: supply: add Qualcomm PMI8998 SMB2 Charger driver
dt-bindings: power: supply: qcom,pmi8998-charger: add bindings for smb2 driver
power: supply: rt9467: Make charger-enable control as logic level
power: supply: Switch i2c drivers back to use .probe()
power: reset: add HAS_IOPORT dependencies
dt-bindings: power: supply: axp20x: Add AXP192 compatible
power: supply: axp20x_usb_power: Add support for AXP192
power: supply: axp20x_usb_power: Remove variant IDs from VBUS polling check
power: supply: axp20x_usb_power: Use regmap field for VBUS disabling
power: supply: axp20x_usb_power: Use regmap fields for USB BC feature
power: supply: axp20x_usb_power: Use regmap fields for VBUS monitor feature
power: supply: axp20x_usb_power: Simplify USB current limit handling
power: supply: hwmon: constify pointers to hwmon_channel_info
power: supply: twl4030_madc_battery: Refactor twl4030_madc_bat_ext_changed()
...
The bulk of these patches relates to the moving to a void-returning
remove callback.
The i.MX HiFi remoteproc driver gets its pm_ops helpers updated to
resolve build warnings about "defined but not used" variables in certain
configurations.
The ST STM32 remoteproc driver is extended to allow using a SCMI reset
controller to hold boot, and has an error message corrected.
The Qualcomm Q6V5 PAS driver gains a missing "static" qualifier on
adsp_segment_dump().
-----BEGIN PGP SIGNATURE-----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=9t2a
-----END PGP SIGNATURE-----
Merge tag 'rproc-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"The bulk of these patches relates to the moving to a void-returning
remove callback.
The i.MX HiFi remoteproc driver gets its pm_ops helpers updated to
resolve build warnings about 'defined but not used' variables in
certain configurations.
The ST STM32 remoteproc driver is extended to allow using a SCMI reset
controller to hold boot, and has an error message corrected.
The Qualcomm Q6V5 PAS driver gains a missing 'static' qualifier on
adsp_segment_dump()"
* tag 'rproc-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (23 commits)
remoteproc: qcom_q6v5_pas: staticize adsp_segment_dump()
remoteproc: stm32: Fix error code in stm32_rproc_parse_dt()
remoteproc: stm32: Allow hold boot management by the SCMI reset controller
dt-bindings: remoteproc: st,stm32-rproc: Rework reset declarations
remoteproc: imx_dsp_rproc: use modern pm_ops
remoteproc: wkup_m3: Convert to platform remove callback returning void
remoteproc: stm32: Convert to platform remove callback returning void
remoteproc: st: Convert to platform remove callback returning void
remoteproc: virtio: Convert to platform remove callback returning void
remoteproc: rcar: Convert to platform remove callback returning void
remoteproc: qcom_wcnss: Convert to platform remove callback returning void
remoteproc: qcom_q6v5_wcss: Convert to platform remove callback returning void
remoteproc: qcom_q6v5_pas: Convert to platform remove callback returning void
remoteproc: qcom_q6v5_mss: Convert to platform remove callback returning void
remoteproc: qcom_q6v5_adsp: Convert to platform remove callback returning void
remoteproc: pru: Convert to platform remove callback returning void
remoteproc: omap: Convert to platform remove callback returning void
remoteproc: mtk_scp: Convert to platform remove callback returning void
remoteproc: meson_mx_ao_arc: Convert to platform remove callback returning void
remoteproc: keystone: Convert to platform remove callback returning void
...
This drops the last of_match_ptr() from the hwspinlock drivers, solving
the resulting "defined but not used" warning/error.
-----BEGIN PGP SIGNATURE-----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=L4Kp
-----END PGP SIGNATURE-----
Merge tag 'hwlock-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull hwspinlock update from Bjorn Andersson:
"This drops the last of_match_ptr() from the hwspinlock drivers,
solving the resulting 'defined but not used' warning/error"
* tag 'hwlock-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
hwspinlock: omap: drop of_match_ptr for ID table
After a change to the bnxt_re driver, it fails to link when
CONFIG_INFINIBAND_USER_ACCESS is disabled:
aarch64-linux-ld: drivers/infiniband/hw/bnxt_re/ib_verbs.o: in function `bnxt_re_handler_BNXT_RE_METHOD_ALLOC_PAGE':
ib_verbs.c:(.text+0xd64): undefined reference to `ib_uverbs_get_ucontext_file'
aarch64-linux-ld: drivers/infiniband/hw/bnxt_re/ib_verbs.o:(.rodata+0x168): undefined reference to `uverbs_idr_class'
aarch64-linux-ld: drivers/infiniband/hw/bnxt_re/ib_verbs.o:(.rodata+0x1a8): undefined reference to `uverbs_destroy_def_handler'
The problem is that the 'bnxt_re_uapi_defs' structure is built
unconditionally and references a couple of functions that are never
really called in this configuration but instead require other functions
that are left out.
Adding an #ifdef around the new code, or a Kconfig dependency would
address this problem, but adding the compile-time check inside of the
UAPI_DEF_CHAIN_OBJ_TREE_NAMED() macro seems best because that also
addresses the problem in other drivers that may run into the same
dependency.
Fixes: 360da60d6c ("RDMA/bnxt_re: Enable low latency push")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
resume support in vdpa/solidrun
structure size optimizations in virtio_pci
new pds_vdpa driver
immediate initialization mechanism for vdpa/ifcvf
interrupt bypass for vdpa/mlx5
multiple worker support for vhost
viirtio net in Intel F2000X-PL support for vdpa/ifcvf
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmSi95cPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpJ58H/A++mwjLsoiJ/3xgf2S2Fn0p0lkgxg61LrjD
Q9p8zstG/BndRvv018XcJKoklaHpb4WcmNctKRNZJ6BjPj+ZwdADuSzoaUNurPD4
M3s/nXVWvg7/2FifGDpCzQpyw0MR0Ip6/yqtdTl4vuLZGxI1nNGDfYbDgc3vZeCp
pYTLsl/XUPzix4iJouEQqy5rmlUia3IE751aECrdk58z17lDo/Znar4hsXF0acQY
+G6C/MNZQgf1rtJIl901h54W8rAoubxeda80uXSQk9fDyPG/wZYh2wFBGPi9qYa+
9E+tOgHprMZ7G5GEopDdd19UctuW7M+YXPWZa1ijp8EZXmMpzuo=
=5tdF
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- resume support in vdpa/solidrun
- structure size optimizations in virtio_pci
- new pds_vdpa driver
- immediate initialization mechanism for vdpa/ifcvf
- interrupt bypass for vdpa/mlx5
- multiple worker support for vhost
- viirtio net in Intel F2000X-PL support for vdpa/ifcvf
- fixes, cleanups all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
vhost: Make parameter name match of vhost_get_vq_desc()
vduse: fix NULL pointer dereference
vhost: Allow worker switching while work is queueing
vhost_scsi: add support for worker ioctls
vhost: allow userspace to create workers
vhost: replace single worker pointer with xarray
vhost: add helper to parse userspace vring state/file
vhost: remove vhost_work_queue
vhost_scsi: flush IO vqs then send TMF rsp
vhost_scsi: convert to vhost_vq_work_queue
vhost_scsi: make SCSI cmd completion per vq
vhost_sock: convert to vhost_vq_work_queue
vhost: convert poll work to be vq based
vhost: take worker or vq for flushing
vhost: take worker or vq instead of dev for queueing
vhost, vhost_net: add helper to check if vq has work
vhost: add vhost_worker pointer to vhost_virtqueue
vhost: dynamically allocate vhost_worker
vhost: create worker at end of vhost_dev_set_owner
virtio_bt: call scheduler when we free unused buffs
...
* Eager page splitting optimization for dirty logging, optionally
allowing for a VM to avoid the cost of hugepage splitting in the stage-2
fault path.
* Arm FF-A proxy for pKVM, allowing a pKVM host to safely interact with
services that live in the Secure world. pKVM intervenes on FF-A calls
to guarantee the host doesn't misuse memory donated to the hyp or a
pKVM guest.
* Support for running the split hypervisor with VHE enabled, known as
'hVHE' mode. This is extremely useful for testing the split
hypervisor on VHE-only systems, and paves the way for new use cases
that depend on having two TTBRs available at EL2.
* Generalized framework for configurable ID registers from userspace.
KVM/arm64 currently prevents arbitrary CPU feature set configuration
from userspace, but the intent is to relax this limitation and allow
userspace to select a feature set consistent with the CPU.
* Enable the use of Branch Target Identification (FEAT_BTI) in the
hypervisor.
* Use a separate set of pointer authentication keys for the hypervisor
when running in protected mode, as the host is untrusted at runtime.
* Ensure timer IRQs are consistently released in the init failure
paths.
* Avoid trapping CTR_EL0 on systems with Enhanced Virtualization Traps
(FEAT_EVT), as it is a register commonly read from userspace.
* Erratum workaround for the upcoming AmpereOne part, which has broken
hardware A/D state management.
RISC-V:
* Redirect AMO load/store misaligned traps to KVM guest
* Trap-n-emulate AIA in-kernel irqchip for KVM guest
* Svnapot support for KVM Guest
s390:
* New uvdevice secret API
* CMM selftest and fixes
* fix racy access to target CPU for diag 9c
x86:
* Fix missing/incorrect #GP checks on ENCLS
* Use standard mmu_notifier hooks for handling APIC access page
* Drop now unnecessary TR/TSS load after VM-Exit on AMD
* Print more descriptive information about the status of SEV and SEV-ES during
module load
* Add a test for splitting and reconstituting hugepages during and after
dirty logging
* Add support for CPU pinning in demand paging test
* Add support for AMD PerfMonV2, with a variety of cleanups and minor fixes
included along the way
* Add a "nx_huge_pages=never" option to effectively avoid creating NX hugepage
recovery threads (because nx_huge_pages=off can be toggled at runtime)
* Move handling of PAT out of MTRR code and dedup SVM+VMX code
* Fix output of PIC poll command emulation when there's an interrupt
* Add a maintainer's handbook to document KVM x86 processes, preferred coding
style, testing expectations, etc.
* Misc cleanups, fixes and comments
Generic:
* Miscellaneous bugfixes and cleanups
Selftests:
* Generate dependency files so that partial rebuilds work as expected
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmSgHrIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroORcAf+KkBlXwQMf+Q0Hy6Mfe0OtkKmh0Ae
6HJ6dsuMfOHhWv5kgukh+qvuGUGzHq+gpVKmZg2yP3h3cLHOLUAYMCDm+rjXyjsk
F4DbnJLfxq43Pe9PHRKFxxSecRcRYCNox0GD5UYL4PLKcH0FyfQrV+HVBK+GI8L3
FDzUcyJkR12Lcj1qf++7fsbzfOshL0AJPmidQCoc6wkLJpUEr/nYUqlI1Kx3YNuQ
LKmxFHS4l4/O/px3GKNDrLWDbrVlwciGIa3GZLS52PZdW3mAqT+cqcPcYK6SW71P
m1vE80VbNELX5q3YSRoOXtedoZ3Pk97LEmz/xQAsJ/jri0Z5Syk0Ok0m/Q==
=AMXp
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM64:
- Eager page splitting optimization for dirty logging, optionally
allowing for a VM to avoid the cost of hugepage splitting in the
stage-2 fault path.
- Arm FF-A proxy for pKVM, allowing a pKVM host to safely interact
with services that live in the Secure world. pKVM intervenes on
FF-A calls to guarantee the host doesn't misuse memory donated to
the hyp or a pKVM guest.
- Support for running the split hypervisor with VHE enabled, known as
'hVHE' mode. This is extremely useful for testing the split
hypervisor on VHE-only systems, and paves the way for new use cases
that depend on having two TTBRs available at EL2.
- Generalized framework for configurable ID registers from userspace.
KVM/arm64 currently prevents arbitrary CPU feature set
configuration from userspace, but the intent is to relax this
limitation and allow userspace to select a feature set consistent
with the CPU.
- Enable the use of Branch Target Identification (FEAT_BTI) in the
hypervisor.
- Use a separate set of pointer authentication keys for the
hypervisor when running in protected mode, as the host is untrusted
at runtime.
- Ensure timer IRQs are consistently released in the init failure
paths.
- Avoid trapping CTR_EL0 on systems with Enhanced Virtualization
Traps (FEAT_EVT), as it is a register commonly read from userspace.
- Erratum workaround for the upcoming AmpereOne part, which has
broken hardware A/D state management.
RISC-V:
- Redirect AMO load/store misaligned traps to KVM guest
- Trap-n-emulate AIA in-kernel irqchip for KVM guest
- Svnapot support for KVM Guest
s390:
- New uvdevice secret API
- CMM selftest and fixes
- fix racy access to target CPU for diag 9c
x86:
- Fix missing/incorrect #GP checks on ENCLS
- Use standard mmu_notifier hooks for handling APIC access page
- Drop now unnecessary TR/TSS load after VM-Exit on AMD
- Print more descriptive information about the status of SEV and
SEV-ES during module load
- Add a test for splitting and reconstituting hugepages during and
after dirty logging
- Add support for CPU pinning in demand paging test
- Add support for AMD PerfMonV2, with a variety of cleanups and minor
fixes included along the way
- Add a "nx_huge_pages=never" option to effectively avoid creating NX
hugepage recovery threads (because nx_huge_pages=off can be toggled
at runtime)
- Move handling of PAT out of MTRR code and dedup SVM+VMX code
- Fix output of PIC poll command emulation when there's an interrupt
- Add a maintainer's handbook to document KVM x86 processes,
preferred coding style, testing expectations, etc.
- Misc cleanups, fixes and comments
Generic:
- Miscellaneous bugfixes and cleanups
Selftests:
- Generate dependency files so that partial rebuilds work as
expected"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (153 commits)
Documentation/process: Add a maintainer handbook for KVM x86
Documentation/process: Add a label for the tip tree handbook's coding style
KVM: arm64: Fix misuse of KVM_ARM_VCPU_POWER_OFF bit index
RISC-V: KVM: Remove unneeded semicolon
RISC-V: KVM: Allow Svnapot extension for Guest/VM
riscv: kvm: define vcpu_sbi_ext_pmu in header
RISC-V: KVM: Expose IMSIC registers as attributes of AIA irqchip
RISC-V: KVM: Add in-kernel virtualization of AIA IMSIC
RISC-V: KVM: Expose APLIC registers as attributes of AIA irqchip
RISC-V: KVM: Add in-kernel emulation of AIA APLIC
RISC-V: KVM: Implement device interface for AIA irqchip
RISC-V: KVM: Skeletal in-kernel AIA irqchip support
RISC-V: KVM: Set kvm_riscv_aia_nr_hgei to zero
RISC-V: KVM: Add APLIC related defines
RISC-V: KVM: Add IMSIC related defines
RISC-V: KVM: Implement guest external interrupt line management
KVM: x86: Remove PRIx* definitions as they are solely for user space
s390/uv: Update query for secret-UVCs
s390/uv: replace scnprintf with sysfs_emit
s390/uvdevice: Add 'Lock Secret Store' UVC
...
Fairly small changes this cycle.
* An additional static inline function when kgdb is not enabled to
reduce boilerplate in arch files.
* kdb will now handle input with linefeeds more like carriage return.
This will make little difference for interactive use but can make
it script to use expect-like interaction with kdb.
* A couple of warning fixes.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
-----BEGIN PGP SIGNATURE-----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=wAuD
-----END PGP SIGNATURE-----
Merge tag 'kgdb-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb updates from Daniel Thompson:
"Fairly small changes this cycle:
- An additional static inline function when kgdb is not enabled to
reduce boilerplate in arch files
- kdb will now handle input with linefeeds more like carriage return.
This will make little difference for interactive use but can make
it script to use expect-like interaction with kdb
- A couple of warning fixes"
* tag 'kgdb-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kdb: move kdb_send_sig() declaration to a better header file
kdb: Handle LF in the command parser
kdb: include kdb_private.h for function prototypes
kgdb: Provide a stub kgdb_nmicallback() if !CONFIG_KGDB
Function do_qc has two main uses: (1) to re-sync the local quota changes
(qd) to the master quotas, and (2) normal quota changes. In the case of
normal quota changes, the change can be positive or negative, as the
quota usage goes up and down.
Before this patch function do_qc was distinguishing one from another by
whether the resulting value is or isn't zero: In the case of a re-sync
(called do_sync) the quota value is moved from the temporary value to a
master value, so the amount is added to one and subtracted from the
other. The problem is that since the values can be positive or negative
we can occasionally run into situations where we are not doing a re-sync
but the quota change just happens to cancel out the previous value.
In the case of a re-sync extra references and locks are taken, and so
do_qc needs to release them. In the case of a normal quota change, no
extra references and locks are taken, so it must not try to release
them.
The problem is: if the quota change is not a re-sync but the value just
happens to cancel out the original quota change, the resulting zero
value fools do_qc into thinking this is a re-sync and therefore it must
release the extra references. This results in problems, mainly having to
do with slot reference numbers going smaller than zero.
This patch introduces new constants, QC_SYNC and QC_CHANGE so do_qc can
really tell the difference. For QC_SYNC calls it must release the extra
references acquired by gfs2_quota_unlock's call to qd_check_sync. For
QC_CHANGE calls it does not have extra references to put.
Note that this allows quota changes back to a value of zero, and so I
removed an assert warning related to that.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Replace kmap_local_page() + memcpy() + kunmap_local() sequences with
memcpy_{from,to}_page() where we are not doing anything else with the
mapped page.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Replace the remaining instances of kmap_atomic() ... kunmap_atomic()
with kmap_local_page() ... kunmap_local().
In gfs2_write_buf_to_page(), we can call flush_dcache_page() after
unmapping the page.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
kmap_atomic() is deprecated in favor of kmap_local_{folio,page}().
Therefore, replace kmap_atomic() with kmap_local_page() in
gfs2_internal_read() and stuffed_readpage().
kmap_atomic() disables page-faults and preemption (the latter only for
!PREEMPT_RT kernels), However, the code within the mapping/un-mapping in
gfs2_internal_read() and stuffed_readpage() does not depend on the
above-mentioned side effects.
Therefore, a mere replacement of the old API with the new one is all that
is required (i.e., there is no need to explicitly add any calls to
pagefault_disable() and/or preempt_disable()).
Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Commit 27a2660f1e ("gfs2: Dump nrpages for inodes and their glocks")
added some locking around reading inode->i_data.nrpages. That locking
doesn't do anything really, so get rid of it.
With that, the glock argument to ->go_dump() can be made const again as
well.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
All the remaining users of gfs2_freeze_lock_shared() set freeze_gh to
&sdp->sd_freeze_gh and flags to 0, so remove those two parameters.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Replace sd_freeze_state with a new SDF_FROZEN flag.
There no longer is a need for indicating that a freeze is in progress
(SDF_STARTING_FREEZE); we are now protecting the critical sections with
the sd_freeze_mutex.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
So far, at mount time, gfs2 would take the freeze glock in shared mode
and then immediately drop it again, turning it into a cached glock that
can be reclaimed at any time. To freeze the filesystem cluster-wide,
the node initiating the freeze would take the freeze glock in exclusive
mode, which would cause the freeze glock's freeze_go_sync() callback to
run on each node. There, gfs2 would freeze the filesystem and schedule
gfs2_freeze_func() to run. gfs2_freeze_func() would re-acquire the
freeze glock in shared mode, thaw the filesystem, and drop the freeze
glock again. The initiating node would keep the freeze glock held in
exclusive mode. To thaw the filesystem, the initiating node would drop
the freeze glock again, which would allow gfs2_freeze_func() to resume
on all nodes, leaving the filesystem in the thawed state.
It turns out that in freeze_go_sync(), we cannot reliably and safely
freeze the filesystem. This is primarily because the final unmount of a
filesystem takes a write lock on the s_umount rw semaphore before
calling into gfs2_put_super(), and freeze_go_sync() needs to call
freeze_super() which also takes a write lock on the same semaphore,
causing a deadlock. We could work around this by trying to take an
active reference on the super block first, which would prevent unmount
from running at the same time. But that can fail, and freeze_go_sync()
isn't actually allowed to fail.
To get around this, this patch changes the freeze glock locking scheme
as follows:
At mount time, each node takes the freeze glock in shared mode. To
freeze a filesystem, the initiating node first freezes the filesystem
locally and then drops and re-acquires the freeze glock in exclusive
mode. All other nodes notice that there is contention on the freeze
glock in their go_callback callbacks, and they schedule
gfs2_freeze_func() to run. There, they freeze the filesystem locally
and drop and re-acquire the freeze glock before re-thawing the
filesystem. This is happening outside of the glock state engine, so
there, we are allowed to fail.
From a cluster point of view, taking and immediately dropping a glock is
indistinguishable from taking the glock and only dropping it upon
contention, so this new scheme is compatible with the old one.
Thanks to Li Dong <lidong@vivo.com> for reporting a locking bug in
gfs2_freeze_func() in a previous version of this commit.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Here is the big set of USB and Thunderbolt driver updates for 6.5-rc1.
Included in here are:
- Lots of USB4/Thunderbolt additions and updates for new hardware
types and fixes as people are starting to get access to the hardware
in the wild
- new gadget controller driver, cdns2, added
- new typec drivers added
- xhci driver updates
- typec driver updates
- usbip driver fixes
- usb-serial driver updates and fixes
- lots of smaller USB driver updates
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZKKcVw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynEIQCgzJgnMCB81mirXlY1ZpCSDFqN8KIAnjRc27/1
vnUzldMQGY/FiS549gD9
=G3yz
-----END PGP SIGNATURE-----
Merge tag 'usb-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for 6.5-rc1.
Included in here are:
- Lots of USB4/Thunderbolt additions and updates for new hardware
types and fixes as people are starting to get access to the
hardware in the wild
- new gadget controller driver, cdns2, added
- new typec drivers added
- xhci driver updates
- typec driver updates
- usbip driver fixes
- usb-serial driver updates and fixes
- lots of smaller USB driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (265 commits)
usb: host: xhci-plat: Set XHCI_STATE_REMOVING before resuming XHCI HC
usb: host: xhci: Do not re-initialize the XHCI HC if being removed
usb: typec: nb7vpq904m: fix CONFIG_DRM dependency
usbip: usbip_host: Replace strlcpy with strscpy
usb: dwc3: gadget: Propagate core init errors to UDC during pullup
USB: serial: option: add LARA-R6 01B PIDs
usb: ulpi: Make container_of() no-op in to_ulpi_dev()
usb: gadget: legacy: fix error return code in gfs_bind
usb: typec: fsa4480: add support for Audio Accessory Mode
usb: typec: fsa4480: rework mux & switch setup to handle more states
usb: typec: ucsi: call typec_set_mode on non-altmode partner change
USB: gadget: f_hid: make hidg_class a static const structure
USB: gadget: f_printer: make usb_gadget_class a static const structure
USB: mon: make mon_bin_class a static const structure
USB: gadget: udc: core: make udc_class a static const structure
USB: roles: make role_class a static const structure
dt-bindings: usb: dwc3: Add interrupt-names property support for wakeup interrupt
dt-bindings: usb: Add StarFive JH7110 USB controller
dt-bindings: usb: dwc3: Add IPQ9574 compatible
usb: cdns2: Fix spelling mistake in a trace message "Wakupe" -> "Wakeup"
...
The .adjphase operation is an operation that is implemented only by certain
PHCs. The sysfs device attribute node for querying the maximum phase
adjustment supported should not be exposed on devices that do not support
.adjphase.
Fixes: c3b60ab7a4 ("ptp: Add .getmaxphase callback to ptp_clock_info")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/netdev/20230627162146.GA114473@dev-arch.thelio-3990X/
Link: https://lore.kernel.org/all/CA+G9fYtKCZeAUTtwe69iK8Xcz1mOKQzwcy49wd+imZrfj6ifXA@mail.gmail.com/
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Message-ID: <20230627232139.213130-1-rrameshbabu@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Here is the big set of tty/serial driver updates for 6.5-rc1.
Included in here are:
- tty_audit code cleanups from Jiri
- more 8250 cleanups from Ilpo
- samsung_tty driver bugfixes
- 8250 lock port updates
- usual fsl_lpuart driver updates and fixes
- other small serial driver fixes and updates, full details in the
shortlog.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZKKVTQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl+wACgwWX8fdrkBHASPVkcYOn8xa27E08AnjNz2Y8K
vvOII6EEYKwFjEkjAoIX
=By18
-----END PGP SIGNATURE-----
Merge tag 'tty-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of tty/serial driver updates for 6.5-rc1.
Included in here are:
- tty_audit code cleanups from Jiri
- more 8250 cleanups from Ilpo
- samsung_tty driver bugfixes
- 8250 lock port updates
- usual fsl_lpuart driver updates and fixes
- other small serial driver fixes and updates, full details in the
shortlog
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (58 commits)
tty_audit: make data of tty_audit_log() const
tty_audit: make tty pointers in exposed functions const
tty_audit: make icanon a bool
tty_audit: invert the condition in tty_audit_log()
tty_audit: use kzalloc() in tty_audit_buf_alloc()
tty_audit: use TASK_COMM_LEN for task comm
Revert "8250: add support for ASIX devices with a FIFO bug"
serial: atmel: don't enable IRQs prematurely
tty: serial: Add Nuvoton ma35d1 serial driver support
tty: serial: fsl_lpuart: add earlycon for imx8ulp platform
tty: serial: imx: fix rs485 rx after tx
selftests: tty: add selftest for tty timestamp updates
tty: tty_io: update timestamps on all device nodes
tty: fix hang on tty device with no_room set
serial: core: fix -EPROBE_DEFER handling in init
serial: 8250_omap: Use force_suspend and resume for system suspend
tty: serial: samsung_tty: Use abs() to simplify some code
tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() when iterating clk
tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() in case of error
serial: 8250: Apply FSL workarounds also without SERIAL_8250_CONSOLE
...
Here is a set of staging driver updates for 6.5-rc1. It's a small
update this merge window, nothing major at all, overall just under 1000
lines of code removed, not a huge churn.
Nothing major to highlight here either, just lots of small coding style
fixes.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZKKS2A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykQigCcCLPB/BGgwbWFaqoAHK6qecn82XcAnj+VcXSw
v9Jj6mYpg7PDpXqv6o/c
=NcdL
-----END PGP SIGNATURE-----
Merge tag 'staging-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is a set of staging driver updates for 6.5-rc1. It's a small
update this merge window, nothing major at all, overall just under
1000 lines of code removed, not a huge churn.
Nothing major to highlight here either, just lots of small coding
style fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'staging-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (62 commits)
staging: rtl8192e: Remove whitespace and blank lines
staging: rtl8192e: remove 5G related code
staging: rtl8192e: remove comparison to true
staging: rtl8192e: remove return statement from void function
staging: rtl8192e: convert else if sequence to switch
staging: rtl8192e: clean up brace coding style issues
staging: rtl8723bs: Fix blank line issues
staging: rtl8723bs: Fix block comment issue
staging: rtl8723bs: Fix indentation issues
staging: vchiq_arm: Remove extra struct vchiq_instance declaration
staging: rtl8192e: Rename variable InitialGainHandler
staging: rtl8192e: Rename variable LeisurePSLeave
staging: rtl8192e: Rename variable SetBWModeHandler
staging: rtl8192e: Rename variable SetWirelessMode
staging: rtl8192e: Rename RTLLIB_LINKED_SCANNING
staging: rtl8192e: Rename RTLLIB_LINKED to MAC80211_LINKED
staging: rtl8192e: Rename RTLLIB_NOLINK to MAC80211_NOLINK
staging: rtl8192e: Rename state to link_state
staging: rtl8192e: Rename rtllib_state to rtl_link_state
staging: rtl8192e: Remove unused enum led_ctl_mode
...
Here are a small set of changes for 6.5-rc1 for some driver core
changes. Included in here are:
- device property cleanups to make it easier to write "agnostic"
drivers when regards to the firmware layer underneath them (DT vs.
ACPI)
- debugfs documentation updates
- devres additions
- sysfs documentation and changes to handle empty directory creation
logic better
- tiny kernfs optimizations
- other tiny changes
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZKKSEQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymoowCfT+Joha+cz4edAFUvd55lKPPJJFsAoNiprHmX
di37sirvn6vo54Hk0Nyq
=qqTo
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here are a small set of changes for 6.5-rc1 for some driver core
changes. Included in here are:
- device property cleanups to make it easier to write "agnostic"
drivers when regards to the firmware layer underneath them (DT vs.
ACPI)
- debugfs documentation updates
- devres additions
- sysfs documentation and changes to handle empty directory creation
logic better
- tiny kernfs optimizations
- other tiny changes
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
sysfs: Skip empty folders creation
sysfs: Improve readability by following the kernel coding style
drivers: fwnode: fix fwnode_irq_get[_byname]()
ata: ahci_platform: Make code agnostic to OF/ACPI
device property: Implement device_is_compatible()
ACPI: Move ACPI_DEVICE_CLASS() to mod_devicetable.h
base/node: Use 'property' to identify an access parameter
driver core: device.h: add some missing kerneldocs
kernfs: fix missing kernfs_idr_lock to remove an ID from the IDR
isa: Remove unnecessary checks
MAINTAINERS: add entry for auxiliary bus
debugfs: Correct the 'debugfs_create_str' docs
serial: qcom_geni: Comment use of devm_krealloc rather than devm_krealloc_array
iio: adc: Use devm_krealloc_array
hwmon: pmbus: Use devm_krealloc_array
This reverts commit a9dc8d0442.
The standard for KUnit is to not build tests at all when required
functionality is missing, rather than doing test "skip". Restore this
for the fortify tests, so that architectures without
CONFIG_ARCH_HAS_FORTIFY_SOURCE do not emit unsolvable warnings.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/CAMuHMdUrxOEroHVUt7-mAnKSBjY=a-D3jr+XiAifuwv06Ob9Pw@mail.gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Here is the big set of char/misc and other driver subsystem updates for
6.5-rc1.
Lots of different, tiny, stuff in here, from a range of smaller driver
subsystems, including pulls from some substems directly:
- IIO driver updates and additions
- W1 driver updates and fixes (and a new maintainer!)
- FPGA driver updates and fixes
- Counter driver updates
- Extcon driver updates
- Interconnect driver updates
- Coresight driver updates
- mfd tree tag merge needed for other updates
on top of that, lots of small driver updates as patches, including:
- static const updates for class structures
- nvmem driver updates
- pcmcia driver fix
- lots of other small driver updates and fixes
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZKKNMw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylhlQCfZrtz8RIbau8zbzh/CKpKBOmvHp4An3V64hbz
recBPLH0ZACKl0wPl4iZ
=A83A
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.5-rc1.
Lots of different, tiny, stuff in here, from a range of smaller driver
subsystems, including pulls from some substems directly:
- IIO driver updates and additions
- W1 driver updates and fixes (and a new maintainer!)
- FPGA driver updates and fixes
- Counter driver updates
- Extcon driver updates
- Interconnect driver updates
- Coresight driver updates
- mfd tree tag merge needed for other updates on top of that, lots of
small driver updates as patches, including:
- static const updates for class structures
- nvmem driver updates
- pcmcia driver fix
- lots of other small driver updates and fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (243 commits)
bsr: fix build problem with bsr_class static cleanup
comedi: make all 'class' structures const
char: xillybus: make xillybus_class a static const structure
xilinx_hwicap: make icap_class a static const structure
virtio_console: make port class a static const structure
ppdev: make ppdev_class a static const structure
char: misc: make misc_class a static const structure
/dev/mem: make mem_class a static const structure
char: lp: make lp_class a static const structure
dsp56k: make dsp56k_class a static const structure
bsr: make bsr_class a static const structure
oradax: make 'cl' a static const structure
hwtracing: hisi_ptt: Fix potential sleep in atomic context
hwtracing: hisi_ptt: Advertise PERF_PMU_CAP_NO_EXCLUDE for PTT PMU
hwtracing: hisi_ptt: Export available filters through sysfs
hwtracing: hisi_ptt: Add support for dynamically updating the filter list
hwtracing: hisi_ptt: Factor out filter allocation and release operation
samples: pfsm: add CC_CAN_LINK dependency
misc: fastrpc: check return value of devm_kasprintf()
coresight: dummy: Update type of mode parameter in dummy_{sink,source}_enable()
...
Commit a8707f5538 ("irqchip/gic-v3: Add Rockchip 3588001 erratum
workaround") mentioned RK3588S (the slimmed down variant of RK3588)
being affected, but did not check for its compatible value. Thus the
quirk is not applied on RK3588S. Since the GIC ITS node got added to the
upstream DT, boards using RK3588S are no longer booting without this
quirk being applied.
Fixes: 06cdac8e84 ("arm64: dts: rockchip: add GIC ITS support to rk3588")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230703164129.193991-1-sebastian.reichel@collabora.com
We normally rely on the irq_to_cpuid_[un]lock() primitives to make
sure nothing will change col->idx while performing a LPI invalidation.
However, these primitives do not cover VPE doorbells, and we have
some open-coded locking for that. Unfortunately, this locking is
pretty bogus.
Instead, extend the above primitives to cover VPE doorbells and
convert the whole thing to it.
Fixes: f3a059219b ("irqchip/gic-v4.1: Ensure mutual exclusion between vPE affinity change and RD access")
Reported-by: Kunkun Jiang <jiangkunkun@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Zenghui Yu <yuzenghui@huawei.com>
Cc: wanghaibin.wang@huawei.com
Tested-by: Kunkun Jiang <jiangkunkun@huawei.com>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20230617073242.3199746-1-maz@kernel.org
The irq to block mapping is fixed, and interrupts from the first block
will always be routed to the first parent IRQ. But the parent interrupts
themselves can be routed to any available CPU.
This is used by the bootloader to map the first parent interrupt to the
boot CPU, regardless wether the boot CPU is the first one or the second
one.
When booting from the second CPU, the assumption that the first block's
IRQ is mapped to the first CPU breaks, and the system hangs because
interrupts do not get routed correctly.
Fix this by passing the appropriate bcm6434_l1_cpu to the interrupt
handler instead of the chip itself, so the handler always has the right
block.
Fixes: c7c42ec2ba ("irqchips/bmips: Add bcm6345-l1 interrupt controller")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230629072620.62527-1-jonas.gorski@gmail.com
- Add lots of Device Tree bindings / support
- Turn off LED strings when display is blank
- Switch I2C drivers from .probe_new() to .probe()
- Remove superfluous NULL checks
- Only obtain PWM information once and do it in .probe()
- Fix-ups
- Ensure locks are obtained and held when required
-----BEGIN PGP SIGNATURE-----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=pKT7
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Functionality:
- Add lots of Device Tree bindings / support
- Turn off LED strings when display is blank
- Switch I2C drivers from .probe_new() to .probe()
- Remove superfluous NULL checks
- Only obtain PWM information once and do it in .probe()
Fix-ups:
- Ensure locks are obtained and held when required"
* tag 'backlight-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: led_bl: Take led_access lock when required
video: backlight: lp855x: Get PWM for PWM mode during probe
dt-bindings: backlight: lp855x: Convert to YAML and modernize
dt-bindings: backlight: pwm: Make power-supply not required
backlight: pwm_bl: Remove unneeded checks for valid GPIOs
backlight: Switch i2c drivers back to use .probe()
backlight: lm3630a: Turn off both led strings when display is blank
dt-bindings: leds: backlight: ktz8866: Add reg property and update example
When checking if the workarounds were applied successfully, the
read-back mask should also contain the bits being set: it's possible
that in a call to wa_write_clr_set(), the cleared bits are not a
superset of the set bits.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230630203509.1635216-8-lucas.demarchi@intel.com
The comment on the parameter being 0 to avoid the read back doesn't
apply as this is not a call to wa_add(), but rather to
wa_write_clr_set(). So, this register is actually checked and it's
according to the Bspec that the register is RW, not RO.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230630203509.1635216-7-lucas.demarchi@intel.com
Most of the context workarounds tweak masked registers, but not all. For
masked registers, when writing the value it's sufficient to just write
the wa->set_bits since that will take care of both the clr and set bits
as well as not overwriting other bits.
However there are some workarounds, the registers are non-masked. Up
until now the driver was simply emitting a MI_LOAD_REGISTER_IMM with the
set_bits to program the register via the GPU in the WA bb. This has the
side effect of overwriting the content of the register outside of bits
that should be set and also doesn't handle the bits that should be
cleared.
Kenneth reported that on DG2, mesa was seeing a weird behavior due to
the kernel programming of L3SQCREG5 in dg2_ctx_gt_tuning_init(). With
the GPU idle, that register could be read via intel_reg as 0x00e001ff,
but during a 3D workload it would change to 0x0000007f. So the
programming of that tuning was affecting more than the bits in
L3_PWM_TIMER_INIT_VAL_MASK. Matt Roper noticed the lack of rmw for the
context workarounds due to the use of MI_LOAD_REGISTER_IMM.
So, for registers that are not masked, read its value via mmio, modify
and then set it in the buffer to be written by the GPU. This should take
care in a simple way of programming just the bits required by the
tuning/workaround. If in future there are registers that involved that
can't be read by the CPU, a more complex approach may be required like
a) issuing additional instructions to read and modify; or b) scan the
golden context and patch it in place before saving it; or something
else. But for now this should suffice.
Scanning the context workarounds for all platforms, these are the
impacted ones with the respective registers
mtl: DRAW_WATERMARK
mtl/dg2: XEHP_L3SQCREG5, XEHP_FF_MODE2
ICL has some non-masked registers in the context workarounds:
GEN8_L3CNTLREG, IVB_FBC_RT_BASE and VB_FBC_RT_BASE_UPPER, but there
shouldn't be an impact. The first is already being manually read and the
other 2 are intentionally overwriting the entire register. Same
reasoning applies to GEN12_FF_MODE2: the WA is intentionally
overwriting all the bits to avoid a read-modify-write.
v2: Reword commit message wrt GEN12_FF_MODE2 and the changed behavior
on preparatory patches.
v3: Also skip reading if clear|set bits covers everything
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Matt Roper <matthew.d.roper@intel.com>
Link: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23783#note_1968971
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230630203509.1635216-4-lucas.demarchi@intel.com
Right now context workarounds don't do a rmw and instead only write to
the register. Since 2 separate programmings to the same register are
coalesced into a single write, this is not problematic for
GEN12_FF_MODE2 since both TDS and GS timer are going to be written
together and the other remaining bits be zeroed.
However in order to fix other workarounds that may want to preserve the
unrelated bits in the same register, context workarounds need to
be changed to a rmw. To prepare for that, move the programming of
GEN12_FF_MODE2 to a single place so the value passed for "clear" can
be all the bits. Otherwise the second workaround would be dropped as
it'd be detected as overwriting a previously programmed workaround.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230630203509.1635216-3-lucas.demarchi@intel.com