Commit graph

1,215,304 commits

Author SHA1 Message Date
Arnd Bergmann
fcb66ee8d1
ASoC: tas2781: fix Kconfig dependencies
The new driver has two modules that both get enabled for build testing
when all codecs are selected. The comlib part has an i2c dependency,
so this remains disabled on builds without i2c, but then the other
one fails to link:

ERROR: modpost: "tasdevice_dev_bulk_write" [sound/soc/codecs/snd-soc-tas2781-fmwlib.ko] undefined!
ERROR: modpost: "tasdevice_dev_update_bits" [sound/soc/codecs/snd-soc-tas2781-fmwlib.ko] undefined!
ERROR: modpost: "tasdevice_dev_bulk_read" [sound/soc/codecs/snd-soc-tas2781-fmwlib.ko] undefined!
ERROR: modpost: "tasdevice_dev_read" [sound/soc/codecs/snd-soc-tas2781-fmwlib.ko] undefined!
ERROR: modpost: "tasdevice_dev_write" [sound/soc/codecs/snd-soc-tas2781-fmwlib.ko] undefined!

There are many ways to address this, adding an explicit dependency seems
to be the clearest method that keeps the structure of the driver otherwise
unchanged.

Fixes: ef3bcde75d ("ASoC: tas2781: Add tas2781 driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/Message-Id: <20230622101205.3180938-1-arnd@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-22 23:31:28 +01:00
Syed Saba Kareem
3eb96217c1
ASoC: amd: acp: remove acp poweroff function
BIOS invokes ACP Power off sequence based on ACP device state.
Remove redundant code from ACP PCI driver for ACP Power off sequence.

Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Link: https://lore.kernel.org/r/Message-Id: <20230622152406.3709231-4-Syed.SabaKareem@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-22 23:31:27 +01:00
Syed Saba Kareem
ad60672394
ASoC: amd: acp: clear pdm dma interrupt mask
Clear pdm dma interrupt mask in acp_dmic_shutdown().

'Fixes: c32bd332ce ("ASoC: amd: acp: Add generic support for
PDM controller on ACP")'

Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Link: https://lore.kernel.org/r/Message-Id: <20230622152406.3709231-1-Syed.SabaKareem@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-22 23:31:26 +01:00
Maxim Kochetkov
fb180283c0
ASoC: codecs: max98090: Allow dsp_a mode
TDM mode for max98090 is dsp_a compatible with such limitations:
1) Up to four timeslots supported.
2) Only 16 bits timeslots supported.
3) Only 2 active timeslots (L/R) supported.

We want to setup TDM mode only when dsp_a mode is selected. So move
M98090_REG_TDM_FORMAT/M98090_REG_TDM_CONTROL registers setup from
max98090_set_tdm_slot() to the max98090_dai_set_fmt(). Also extend
max98090_set_tdm_slot() with all TDM limitations check.

Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Link: https://lore.kernel.org/r/Message-Id: <20230622142038.63388-1-fido_max@inbox.ru>
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-22 23:31:25 +01:00
Namhyung Kim
d7c2d34d72 perf test: Remove x permission from lib/stat_output.sh
The commit fc51fc87b1 factored out the helper functions to a library
but the new file had execute permission.  Due to the way it detects
the shell test scripts, it showed up in the perf test list unexpectedly.

  $ ./perf test list 2>&1 | grep 86
   76: x86 bp modify
   77: x86 Sample parsing
   78: x86 hybrid
   86:                        <---- (here)

  $ ./perf test -v 86
   86:                                                                 :
  --- start ---
  test child forked, pid 1932207
  test child finished with 0
  ---- end ----
  : Ok

As it's a collection of library functions, it should not run as is.
Let's remove the execute permission.

Fixes: fc51fc87b1 ("perf test: Move all the check functions of stat CSV output to lib")
Acked-by: Ian Rogers <irogers@google.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230622055832.83476-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-06-22 14:34:14 -07:00
Sean Christopherson
63e2f55cab Documentation/process: Add a maintainer handbook for KVM x86
Add a KVM x86 doc to the subsystem/maintainer handbook section to explain
how KVM x86 (currently) operates as a sub-subsystem, and to soapbox on
the rules and expectations for contributing to KVM x86.

Reviewed-by: Like Xu <likexu@tencent.com>
Link: https://lore.kernel.org/r/20230411171651.1067966-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-06-22 14:25:38 -07:00
Sean Christopherson
b7dac767c9 Documentation/process: Add a label for the tip tree handbook's coding style
Add a label for the tip tree's "Coding style notes" so that a forthcoming
KVM x86 handbook can reference/piggyback the tip tree's preferred coding
style.

Link: https://lore.kernel.org/r/20230411171651.1067966-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-06-22 14:25:02 -07:00
Conor Dooley
1ffe6ddc5c
dt-bindings: riscv: cpus: switch to unevaluatedProperties: false
To permit validation of cpu nodes, swap "additionalProperties: true"
out for "unevaluatedProperties: false".

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230615-viper-stoic-1ff8efd7d51d@spud
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-06-22 14:23:53 -07:00
Conor Dooley
3c1b4758a9
dt-bindings: riscv: cpus: add a ref the common cpu schema
To permit validation of RISC-V cpu nodes, "additionalProperties: true"
needs to be swapped for "unevaluatedProperties: false". To facilitate
this in a way that passes dt_binding_check, a reference to the cpu
schema is required.

Disallow the generic cache-op-block-size property that that drags in,
since the RISC-V CBO extensions do not require a common size, and have
individual properties.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230615-dubiously-parasail-79d34cefedce@spud
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-06-22 14:23:52 -07:00
Miquel Raynal
6eef895581
spi: sun6i: Use the new helper to derive the xfer timeout value
A helper was recently added to the core to factorize common code between
drivers, like the amount of time a driver should wait for a transfer to
happen.

It is of course possible to use a default value (like eg. 1s) but it is
way stronger to adapt this amount of time to the transfer. Indeed, long
transfers (eg. 4MiB) on a slow single-spi bus might take more than the
usual second of timeout and prevent lengthy transfers.

The core helper was heavily inspired by the logic applied in this
driver, the only difference being the minimum amount of time which was
enlarged from 0.1s to 0.5s.

Use this helper instead of open-coding it.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jernej Škrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/Message-Id: <20230622090634.3411468-4-miquel.raynal@bootlin.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-22 22:22:54 +01:00
Miquel Raynal
e0205d6203
spi: atmel: Prevent false timeouts on long transfers
A slow SPI bus clocks at ~20MHz, which means it would transfer about
2500 bytes per second with a single data line. Big transfers, like when
dealing with flashes can easily reach a few MiB. The current DMA timeout
is set to 1 second, which means any working transfer of about 4MiB will
always be cancelled.

With the above derivations, on a slow bus, we can assume every byte will
take at most 0.4ms. Said otherwise, we could add 4ms to the 1-second
timeout delay every 10kiB. On a 4MiB transfer, it would bring the
timeout delay up to 2.6s which still seems rather acceptable for a
timeout.

The consequence of this is that long transfers might be allowed, which
hence requires the need to interrupt the transfer if wanted by the
user. We can hence switch to the _interruptible variant of
wait_for_completion. This leads to a little bit more handling to also
handle the interrupted case but looks really acceptable overall.

While at it, we drop the useless, noisy and redundant WARN_ON() call.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Ryan Wanner <ryan.wanner@microchip.com>
Link: https://lore.kernel.org/r/Message-Id: <20230622090634.3411468-3-miquel.raynal@bootlin.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-22 22:22:49 +01:00
Vadym Kochan
ad5c18c75d dt-bindings: mtd: marvell-nand: Convert to YAML DT scheme
Switch the DT binding to a YAML schema to enable the DT validation.

There was also an incorrect reference to dma-names being "rxtx" where
the driver and existing device trees actually use dma-names = "data" so
this is corrected in the conversion.

Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230619040742.1108172-2-chris.packham@alliedtelesis.co.nz
2023-06-22 23:09:04 +02:00
Miquel Raynal
bae825ccfd dt-bindings: mtd: ti,am654: Prevent unevaluated properties
Reference mtd-physmap.yaml which contains all the relevant properties
for this device. Add "unevaluatedProperties: false" to avoid any
spurious addition of random properties.

Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/linux-mtd/20230619092916.3028470-18-miquel.raynal@bootlin.com
2023-06-22 23:08:49 +02:00
Miquel Raynal
2beb46f04b dt-bindings: mtd: mediatek: Prevent NAND chip unevaluated properties
nand-on-flash-bbt is a generic property which may apply to any raw NAND
chip, it does not need to be listed in each controller
description. The raw NAND chip description file which contains the
property is already referenced, so no need to mention the property here
again.

Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/linux-mtd/20230619092916.3028470-17-miquel.raynal@bootlin.com
2023-06-22 23:08:45 +02:00
Miquel Raynal
18d07864e5 dt-bindings: mtd: mediatek: Reference raw-nand-chip.yaml
The mediatek NAND controller should reference the new raw-nand-chip.yaml
binding instead of the original nand-chip.yaml which does not contain
*all* the properties that may be used to fully describe the NAND
devices, certain properties being actually described under
nand-controller.yaml.

Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/linux-mtd/20230619092916.3028470-16-miquel.raynal@bootlin.com
2023-06-22 23:08:42 +02:00
Miquel Raynal
be907ba6c5 dt-bindings: mtd: stm32: Prevent NAND chip unevaluated properties
List all the possible properties in the NAND chip as per the example and
set unevaluatedProperties to false in the NAND chip section.

Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Christophe Kerello <christophe.kerello@foss.st.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/linux-mtd/20230619092916.3028470-15-miquel.raynal@bootlin.com
2023-06-22 23:08:38 +02:00
Miquel Raynal
d028c1cf2c dt-bindings: mtd: rockchip: Prevent NAND chip unevaluated properties
List all the possible properties in the NAND chip as per the example and
set unevaluatedProperties to false in the NAND chip section.

Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/linux-mtd/20230619092916.3028470-14-miquel.raynal@bootlin.com
2023-06-22 23:08:35 +02:00
Miquel Raynal
1dcd314282 dt-bindings: mtd: intel: Prevent NAND chip unevaluated properties
nand-ecc-mode is a generic property which may apply to any raw NAND
chip, it does not need to be listed in each controller
description. Instead, let's reference the raw NAND chip description file
which contains the property. The description contained
"additionalProperties: false" which is wrong as other properties such as
partitions might very well be added in the final .dts, and anyway needs
to be converted into "unexpectedProperties: false" to fit the property
change new requirements.

Cc: Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/linux-mtd/20230619092916.3028470-13-miquel.raynal@bootlin.com
2023-06-22 23:08:31 +02:00
Miquel Raynal
129a70a17c dt-bindings: mtd: denali: Prevent NAND chip unevaluated properties
Ensure all raw NAND chip properties are valid by referencing the
relevant schema and set unevaluatedProperties to false in the NAND chip
section to avoid spurious additions of random properties.

Doing this in one location also saves us from dupplicating the
description of the NAND chip object.

Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/linux-mtd/20230619092916.3028470-12-miquel.raynal@bootlin.com
2023-06-22 23:08:26 +02:00
Miquel Raynal
74b7e3bd28 dt-bindings: mtd: brcmnand: Prevent NAND chip unevaluated properties
Ensure all raw NAND chip properties are valid by referencing the
relevant schema and set unevaluatedProperties to false in the NAND chip
section to avoid spurious additions of random properties.

Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Kamal Dasu <kdasu.kdev@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/linux-mtd/20230619092916.3028470-11-miquel.raynal@bootlin.com
2023-06-22 23:08:23 +02:00
Miquel Raynal
e37eaf5ebc dt-bindings: mtd: meson: Prevent NAND chip unevaluated properties
Ensure all raw NAND chip properties are valid by referencing the
relevant schema and set unevaluatedProperties to false in the NAND chip
section to avoid spurious additions of random properties.

Cc: Liang Yang <liang.yang@amlogic.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/linux-mtd/20230619092916.3028470-10-miquel.raynal@bootlin.com
2023-06-22 23:07:11 +02:00
Miquel Raynal
d58d29623a dt-bindings: mtd: sunxi: Prevent NAND chip unevaluated properties
nand-ecc-mode is a generic property which may apply to any raw NAND
chip, it does not need to be listed in each controller
description. Instead, let's reference the raw NAND chip description file
which contains the property. The description contained
"additionalProperties: false" which is wrong as other properties such as
partitions might very well be added in the final .dts, and anyway needs
to be converted into "unexpectedProperties: false" to fit the property
change new requirements.

Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Samuel Holland <samuel@sholland.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/linux-mtd/20230619092916.3028470-9-miquel.raynal@bootlin.com
2023-06-22 23:05:22 +02:00
Miquel Raynal
711be9c35a dt-bindings: mtd: ingenic: Prevent NAND chip unevaluated properties
List all the possible properties in the NAND chip as per the example and
set unevaluatedProperties to false in the NAND chip section.

Cc: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/linux-mtd/20230619092916.3028470-8-miquel.raynal@bootlin.com
2023-06-22 23:05:18 +02:00
Miquel Raynal
7578bb1f92 dt-bindings: mtd: qcom: Prevent NAND chip unevaluated properties
List all the possible properties in the NAND chip as per the example and
set unevaluatedProperties to false in the NAND chip section.

Cc: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/linux-mtd/20230619092916.3028470-7-miquel.raynal@bootlin.com
2023-06-22 23:05:14 +02:00
Miquel Raynal
411a1215a0 dt-bindings: mtd: qcom: Fix a property position
qcom,boot-partitions is a NAND chip property, not a NAND controller
property. Move the description of the property into the NAND chip
section and just enable the property in the if/else block.

Fixes: 5278cc93a9 ("dt-bindings: mtd: qcom_nandc: document qcom,boot-partitions binding")
Cc: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/linux-mtd/20230619092916.3028470-6-miquel.raynal@bootlin.com
2023-06-22 23:05:10 +02:00
Miquel Raynal
efdd296323 dt-bindings: mtd: Describe nand-ecc-mode
This property has been extensively used for almost two decades already,
a lot of device trees use it, this is not the preferred way to configure
the ECC engines but we cannot just ignore it. Describe the property,
list the exact strings which have once been supported and mark it
deprecated.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/linux-mtd/20230619092916.3028470-5-miquel.raynal@bootlin.com
2023-06-22 23:04:53 +02:00
Miquel Raynal
17241a02a8 dt-bindings: mtd: Mark nand-ecc-placement deprecated
The nand-ecc-placement property has been deprecated for a long time
already, it does not really mean something useful for the ECC engines
and is anyway in the vast majority of cases totally useless. Just mark
it deprecated to avoid appealing people to use it.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/linux-mtd/20230619092916.3028470-4-miquel.raynal@bootlin.com
2023-06-22 23:04:50 +02:00
Miquel Raynal
46721a1c9f dt-bindings: mtd: Create a file for raw NAND chip properties
In an effort to constrain as much as we can the existing binding, we
want to add "unevaluatedProperties: false" in all the NAND chip
descriptions part of NAND controller bindings. But in order to do that
properly, we also need to reference a file which contains all the
"allowed" properties. Right now this file is nand-chip.yaml but in
practice raw NAND controllers may use additional properties in their
NAND chip children node. These properties are listed under
nand-controller.yaml, which makes the "unevaluatedProperties" checks
fail while the description are valid. We need to move these NAND chip
related properties into another file, because we do not want to pollute
nand-chip.yaml which is also referenced by eg. SPI-NAND devices.

Let's create a raw-nand-chip.yaml file to reference all the properties a
raw NAND chip description can contain. The chain of inheritance becomes:
  nand-controller.yaml <- raw-nand-chip.yaml
  raw-nand-chip.yaml   <- nand-chip.yaml
  spi-nand.yaml        <- nand-chip.yaml

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/linux-mtd/20230619092916.3028470-3-miquel.raynal@bootlin.com
2023-06-22 23:04:20 +02:00
Miquel Raynal
da787688a5 dt-bindings: mtd: Accept nand related node names
There is no addition there, but the mtd.yaml file is so generic, it can
be referenced by a wide variety of devices, including nand ones which
already define the node name to "nand@<cs>". Right now it does not lead
to any failure but when we will constrain more the schema, this will
become a problem because we want the mtd-wide properties like label or
partitions to be available for the callers.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/linux-mtd/20230619092916.3028470-2-miquel.raynal@bootlin.com
2023-06-22 23:03:21 +02:00
Bo Liu
efd2ed9351 mtd: sm_ftl: Fix typos in comments
Fix typo in the description of the 'succesfull'.

Signed-off-by: Bo Liu <liubo03@inspur.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230621020331.1508-1-wangdeming@inspur.com
2023-06-22 23:00:43 +02:00
Andy Shevchenko
2a3110e3f9 MAINTAINERS: Add bitfield.h to the BITMAP API record
From time to time changes are tending to go to bitfield.h
header while it may affect other bit operataions. Add
bitfiled.h to the BITMAP API record.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
2023-06-22 13:57:42 -07:00
Andy Shevchenko
f4bc6c12b0 MAINTAINERS: Add bits.h to the BITMAP API record
>From time to time changes are tending to go to the bits.h
headers while it may affect other bit operataions. Add
the bits.h to the BITMAP API record.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
2023-06-22 13:57:41 -07:00
Randy Dunlap
839cad5fa5 cpumask: fix function description kernel-doc notation
Use kernel-doc notation for the function description to prevent
a warning:

lib/cpumask.c:160: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * Returns an arbitrary cpu within srcp1 & srcp2.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
2023-06-22 13:57:41 -07:00
Gavin Shan
cdd2d06fbc nodemask: Drop duplicate check in for_each_node_mask()
The return value type is changed from 'int' to 'unsigned int' since
commit 0dfe54071d ("nodemask: Fix return values to be unsigned").
Besides, the conversion between 'int' and 'unsigned int' on the
parameter @node is guaranteed to be safe due to the limited range of
MAX_NUMNODES and CONFIG_NODES_SHIFT. By the way, '(node >= 0)' should
have been '(node) >= 0' actually.

It's unnecessary to check if their return values are greater or equal
to 0 in for_each_node_mask(). Remove it.

No functional change intended.

Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
2023-06-22 13:57:41 -07:00
Yury Norov
c1d2ba10f5 lib/bitmap: drop optimization of bitmap_{from,to}_arr64
bitmap_{from,to}_arr64() optimization is overly optimistic on 32-bit LE
architectures when it's wired to bitmap_copy_clear_tail().

bitmap_copy_clear_tail() takes care of unused bits in the bitmap up to
the next word boundary. But on 32-bit machines when copying bits from
bitmap to array of 64-bit words, it's expected that the unused part of
a recipient array must be cleared up to 64-bit boundary, so the last 4
bytes may stay untouched when nbits % 64 <= 32.

While the copying part of the optimization works correct, that clear-tail
trick makes corresponding tests reasonably fail:

test_bitmap: bitmap_to_arr64(nbits == 1): tail is not safely cleared: 0xa5a5a5a500000001 (must be 0x0000000000000001)

Fix it by removing bitmap_{from,to}_arr64() optimization for 32-bit LE
arches.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/lkml/20230225184702.GA3587246@roeck-us.net/
Fixes: 0a97953fd2 ("lib: add bitmap_{from,to}_arr64")
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
2023-06-22 13:57:41 -07:00
Yury Norov
c4c14c2906 lib/test_bitmap: increment failure counter properly
The tests that don't use expect_eq() macro to determine that a test is
failured must increment failed_tests explicitly.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/lkml/20230225184702.GA3587246@roeck-us.net/
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
2023-06-22 13:57:41 -07:00
Paolo Bonzini
2623b3dc87 KVM/arm64 fixes for 6.4, take #4
- Correctly save/restore PMUSERNR_EL0 when host userspace is using
   PMU counters directly
 
 - Fix GICv2 emulation on GICv3 after the locking rework
 
 - Don't use smp_processor_id() in kvm_pmu_probe_armpmu(), and
   document why...
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAmSB9zEPHG1hekBrZXJu
 ZWwub3JnAAoJECPQ0LrRPXpDJc4P+gIQog8QCPo7YhFPo2JstbK7P6Nxn7j1JuL+
 c+0tsiB1CaSa3D7i9JQO7hTJdwGxu6r+oCzxF7zsp6nIOItP1CwQVQyBlTV7XpY5
 Gh0sM4VwFC7F7bYV9LD1KaJc7W2BwpsZgRGp5ddZwLXp6uujJNuFPyaynYJU+JIy
 /ps+wHF19ZMUohkPUx690tglfWmJws6Km4KBVACIf4KznRfTxaOEfIb0iQJKNHP/
 6zpxz37Iwiad+KI/mudjAeE/DwUd3PjVc9Lvc5NRsencC30+K7Yz2mxsFXkgicKS
 wUJ9Sh0sxuu/joRNfd71CcN3J2/zgOZIoobOKE5n9nBIWPrWA9SckqJ1QwwgOeHH
 DQcoH2YZ1CTUgYemqlXwJku3ZF22ottQDFfgXGCiLS9M2+vMDrY+prbTOAI7euCz
 6nLTeqANZq7dDzZjqnuq0BLHEAjHkBklE6TaUYa9/wVV1PQ+1+ifBzxUC5BPGwap
 PZ8XKBMQqO4C+l2THLRFp4qbQ37GBy6h6FKb8TvCCW2FmFdWUIu/FlhJRyJ+tEr3
 PhDhYJR4yH7H6Xk2xnrJZmatf2g69rj2pbzbru/mhYZgyruSEAllCtEB44XUik6a
 9xFet49oLWGyQNxYOlc5moVIn6OQfUZ04joNQlUuhLCB9CgiMSu3IbBG5lthqE0B
 esw3Yk/R
 =JwZ/
 -----END PGP SIGNATURE-----

Merge tag 'kvmarm-fixes-6.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.4, take #4

- Correctly save/restore PMUSERNR_EL0 when host userspace is using
  PMU counters directly

- Fix GICv2 emulation on GICv3 after the locking rework

- Don't use smp_processor_id() in kvm_pmu_probe_armpmu(), and
  document why...
2023-06-22 15:28:26 -04:00
Douglas Anderson
7b59e8ae92 arm64: dts: qcom: sc7280: Mark SCM as dma-coherent for chrome devices
Just like for sc7180 devices using the Chrome bootflow (AKA trogdor
and IDP), sc7280 devices using the Chrome bootflow also need their
firmware marked dma-coherent. On sc7280 this wasn't causing WiFi to
fail to startup, since WiFi works differently there. However, on
sc7280 devices we were still getting the message at bootup after
commit 7bd6680b47 ("Revert "Revert "arm64: dma: Drop cache
invalidation from arch_dma_prep_coherent()"""):

 qcom_scm firmware:scm: Assign memory protection call failed -22
 qcom_rmtfs_mem 9c900000.memory: assign memory failed
 qcom_rmtfs_mem: probe of 9c900000.memory failed with error -22

We should mark SCM properly just like we did for trogdor.

Fixes: 7bd6680b47 ("Revert "Revert "arm64: dma: Drop cache invalidation from arch_dma_prep_coherent()""")
Fixes: 7a1f4e7f74 ("arm64: dts: qcom: sc7280: Add basic dts/dtsi files for sc7280 soc")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230616081440.v2.4.I21dc14a63327bf81c6bb58fe8ed91dbdc9849ee2@changeid
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-06-22 12:20:12 -07:00
Douglas Anderson
a54b7fa6b9 arm64: dts: qcom: sc7180: Mark SCM as dma-coherent for trogdor
Trogdor devices use firmware backed by TF-A instead of Qualcomm's
normal TZ. On TF-A we end up mapping memory as cacheable.
Specifically, you can see in Trogdor's TF-A code [1] in
qti_sip_mem_assign() that we call qti_mmap_add_dynamic_region() with
MT_RO_DATA. This translates down to MT_MEMORY instead of
MT_NON_CACHEABLE or MT_DEVICE. Apparently Qualcomm's normal TZ
implementation maps the memory as non-cacheable.

Let's add the "dma-coherent" attribute to the SCM for trogdor.

Adding "dma-coherent" like this fixes WiFi on sc7180-trogdor
devices. WiFi was broken as of commit 7bd6680b47 ("Revert "Revert
"arm64: dma: Drop cache invalidation from
arch_dma_prep_coherent()"""). Specifically at bootup we'd get:

 qcom_scm firmware:scm: Assign memory protection call failed -22
 qcom_rmtfs_mem 94600000.memory: assign memory failed
 qcom_rmtfs_mem: probe of 94600000.memory failed with error -22

From discussion on the mailing lists [2] and over IRC [3], it was
determined that we should always have been tagging the SCM as
dma-coherent on trogdor but that the old "invalidate" happened to make
things work most of the time. Tagging it properly like this is a much
more robust solution.

[1] https://chromium.googlesource.com/chromiumos/third_party/arm-trusted-firmware/+/refs/heads/firmware-trogdor-13577.B/plat/qti/common/src/qti_syscall.c
[2] https://lore.kernel.org/r/20230614165904.1.I279773c37e2c1ed8fbb622ca6d1397aea0023526@changeid
[3] https://oftc.irclog.whitequark.org/linux-msm/2023-06-15

Fixes: 7bd6680b47 ("Revert "Revert "arm64: dma: Drop cache invalidation from arch_dma_prep_coherent()""")
Fixes: 7ec3e67307 ("arm64: dts: qcom: sc7180-trogdor: add initial trogdor and lazor dt")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230616081440.v2.3.Ic62daa649b47b656b313551d646c4de9a7da4bd4@changeid
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-06-22 12:20:12 -07:00
Douglas Anderson
9a5f0b11e4 arm64: dts: qcom: sc7180: Mark SCM as dma-coherent for IDP
sc7180-idp is, for most intents and purposes, a trogdor device.
Specifically, sc7180-idp is designed to run the same style of firmware
as trogdor devices. This can be seen from the fact that IDP has the
same "Reserved memory changes" in its device tree that trogdor has.

Recently it was realized that we need to mark SCM as dma-coherent to
match what trogdor's style of firmware (based on TF-A) does [1]. That
means we need this dma-coherent tag on IDP as well.

Without this, on newer versions of Linux, specifically those with
commit 7bd6680b47 ("Revert "Revert "arm64: dma: Drop cache
invalidation from arch_dma_prep_coherent()"""), WiFi will fail to
work. At bootup you'll see:

  qcom_scm firmware:scm: Assign memory protection call failed -22
  qcom_rmtfs_mem 94600000.memory: assign memory failed
  qcom_rmtfs_mem: probe of 94600000.memory failed with error -22

[1] https://lore.kernel.org/r/20230615145253.1.Ic62daa649b47b656b313551d646c4de9a7da4bd4@changeid

Fixes: 7bd6680b47 ("Revert "Revert "arm64: dma: Drop cache invalidation from arch_dma_prep_coherent()""")
Fixes: f5ab220d16 ("arm64: dts: qcom: sc7180: Add remoteproc enablers")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230616081440.v2.2.I3c17d546d553378aa8a0c68c3fe04bccea7cba17@changeid
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-06-22 12:20:12 -07:00
Douglas Anderson
c0877829ad dt-bindings: firmware: qcom,scm: Document that SCM can be dma-coherent
Trogdor devices use firmware backed by TF-A instead of Qualcomm's
normal TZ. On TF-A we end up mapping memory as cacheable. Specifically,
you can see in Trogdor's TF-A code [1] in qti_sip_mem_assign() that we
call qti_mmap_add_dynamic_region() with MT_RO_DATA. This translates
down to MT_MEMORY instead of MT_NON_CACHEABLE or MT_DEVICE.

Let's allow devices like trogdor to be described properly by allowing
"dma-coherent" in the SCM node.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230616081440.v2.1.Ie79b5f0ed45739695c9970df121e11d724909157@changeid
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-06-22 12:20:12 -07:00
Gavin Shan
2230f9e117 KVM: Avoid illegal stage2 mapping on invalid memory slot
We run into guest hang in edk2 firmware when KSM is kept as running on
the host. The edk2 firmware is waiting for status 0x80 from QEMU's pflash
device (TYPE_PFLASH_CFI01) during the operation of sector erasing or
buffered write. The status is returned by reading the memory region of
the pflash device and the read request should have been forwarded to QEMU
and emulated by it. Unfortunately, the read request is covered by an
illegal stage2 mapping when the guest hang issue occurs. The read request
is completed with QEMU bypassed and wrong status is fetched. The edk2
firmware runs into an infinite loop with the wrong status.

The illegal stage2 mapping is populated due to same page sharing by KSM
at (C) even the associated memory slot has been marked as invalid at (B)
when the memory slot is requested to be deleted. It's notable that the
active and inactive memory slots can't be swapped when we're in the middle
of kvm_mmu_notifier_change_pte() because kvm->mn_active_invalidate_count
is elevated, and kvm_swap_active_memslots() will busy loop until it reaches
to zero again. Besides, the swapping from the active to the inactive memory
slots is also avoided by holding &kvm->srcu in __kvm_handle_hva_range(),
corresponding to synchronize_srcu_expedited() in kvm_swap_active_memslots().

  CPU-A                    CPU-B
  -----                    -----
                           ioctl(kvm_fd, KVM_SET_USER_MEMORY_REGION)
                           kvm_vm_ioctl_set_memory_region
                           kvm_set_memory_region
                           __kvm_set_memory_region
                           kvm_set_memslot(kvm, old, NULL, KVM_MR_DELETE)
                             kvm_invalidate_memslot
                               kvm_copy_memslot
                               kvm_replace_memslot
                               kvm_swap_active_memslots        (A)
                               kvm_arch_flush_shadow_memslot   (B)
  same page sharing by KSM
  kvm_mmu_notifier_invalidate_range_start
        :
  kvm_mmu_notifier_change_pte
    kvm_handle_hva_range
    __kvm_handle_hva_range
    kvm_set_spte_gfn            (C)
        :
  kvm_mmu_notifier_invalidate_range_end

Fix the issue by skipping the invalid memory slot at (C) to avoid the
illegal stage2 mapping so that the read request for the pflash's status
is forwarded to QEMU and emulated by it. In this way, the correct pflash's
status can be returned from QEMU to break the infinite loop in the edk2
firmware.

We tried a git-bisect and the first problematic commit is cd4c718352 ("
KVM: arm64: Convert to the gfn-based MMU notifier callbacks"). With this,
clean_dcache_guest_page() is called after the memory slots are iterated
in kvm_mmu_notifier_change_pte(). clean_dcache_guest_page() is called
before the iteration on the memory slots before this commit. This change
literally enlarges the racy window between kvm_mmu_notifier_change_pte()
and memory slot removal so that we're able to reproduce the issue in a
practical test case. However, the issue exists since commit d5d8184d35
("KVM: ARM: Memory virtualization setup").

Cc: stable@vger.kernel.org # v3.9+
Fixes: d5d8184d35 ("KVM: ARM: Memory virtualization setup")
Reported-by: Shuai Hu <hshuai@redhat.com>
Reported-by: Zhenyu Zhang <zhenyzha@redhat.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Message-Id: <20230615054259.14911-1-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-06-22 15:14:57 -04:00
Tejun Heo
81621430c8 Revert "cgroup: Avoid -Wstringop-overflow warnings"
This reverts commit 36de5f303c.

The commit caused boot failures on some configurations due to cgroup
hierarchies not being created at all.

Signed-off-by: Tejun Heo <tj@kernel.org>
2023-06-22 08:51:14 -10:00
Maciej Fijalkowski
b7a0345723 ice: use ice_down_up() where applicable
ice_change_mtu() is currently using a separate ice_down() and ice_up()
calls to reflect changed MTU. ice_down_up() serves this purpose, so do
the refactoring here.

Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-06-22 11:14:28 -07:00
Christophe JAILLET
1dacc49782 ice: Remove managed memory usage in ice_get_fw_log_cfg()
There is no need to use managed memory allocation here. The memory is
released at the end of the function.

Use kzalloc()/kfree() to simplify the code.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-06-22 11:14:24 -07:00
Johannes Berg
31b5a54762 wifi: ieee80211: fix erroneous NSTR bitmap size checks
The complete profile bit together with the NSTR link pair
present bit indicate whether or not the NSTR bitmap is,
the NSTR bitmap size just indicates how big it is.

Fixes: 7b6f08771b ("wifi: ieee80211: Support validating ML station profile length")
Fixes: 5c1f97537b ("wifi: mac80211: store BSS param change count from assoc response")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-22 19:52:09 +02:00
Anton Protopopov
fbc5669de6 bpf, docs: Document existing macros instead of deprecated
The BTF_TYPE_SAFE_NESTED macro was replaced by the BTF_TYPE_SAFE_TRUSTED,
BTF_TYPE_SAFE_RCU, and BTF_TYPE_SAFE_RCU_OR_NULL macros. Fix the docs
correspondingly.

Fixes: 6fcd486b3a ("bpf: Refactor RCU enforcement in the verifier.")
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20230622095424.1024244-1-aspsk@isovalent.com
2023-06-22 19:47:32 +02:00
Anton Protopopov
2404dd01b5 bpf, docs: BPF Iterator Document
Fix the description of the seq_info field of the bpf_iter_reg structure which
was wrong due to an accidental copy/paste of the previous field's description.

Fixes: 8972e18a43 ("bpf, docs: BPF Iterator Document")
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20230622095407.1024053-1-aspsk@isovalent.com
2023-06-22 19:44:22 +02:00
Wilken Gottwalt
0d67bbc48c hwmon: (corsair-psu) add support for reading PWM values and mode
Add support for reading PWM values and mode,
and update documentation accordingly.

Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>
Link: https://lore.kernel.org/r/ZJSASByXpzoZ0XyH@monster.localdomain
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-22 10:42:39 -07:00
Guenter Roeck
dd5219ce4f hwmon: (pmbus/adm1275) Disable ADC while updating PMON_CONFIG
According to ADI, changing PMON_CONFIG while the ADC is running can have
unexpected results. ADI recommends halting the ADC with PMON_CONTROL
before setting PMON_CONFIG and then resume after. Follow ADI
recommendation and disable ADC while PMON_CONFIG is updated.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230614163605.3688964-3-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-22 10:39:58 -07:00