Make quirk_enable_clear_retrain_link() an early quirk so that any later
fixups can rely on dev->clear_retrain_link to have been already
initialised.
[bhelgaas: reorder to just before it becomes possible to call
pcie_retrain_link() earlier]
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2305310049000.59226@angie.orcam.me.uk
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Move code polling for the Link Training bit to clear into a function of its
own.
[bhelgaas: reorder to clean up before exposing to PCI core]
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2306111605060.64925@angie.orcam.me.uk
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The call netdev_{put, hold} of dev_{put, hold} will check NULL, so there
is no need to check before using dev_{put, hold}, remove it to silence the
warning:
./drivers/infiniband/core/cma.c:4812:2-9: WARNING: NULL check before dev_{put, hold} functions is not needed.
Link: https://lore.kernel.org/r/20230614014328.14007-1-yang.lee@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5521
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The flags parameter to the request notify verb is a bitmask. But, rxe
driver treats cq->notify as an int. If someone ever set both the
IB_CQ_SOLICITED and the IB_CQ_NEXT_COMP bits rxe_cq_post could fail to
generate a completion event. This patch treats the notify flags as a bit
mask consistently and can handle the above case correctly.
Link: https://lore.kernel.org/r/20230612162244.20038-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Remove all the open coded magic on slot->file_ptr by introducing two
helpers that return the file pointer and the flags instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230620113235.920399-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Two of the three callers want them, so return the more usual format,
and shift into the FFS_ form only for the fixed file table.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230620113235.920399-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The SCM inflight mechanism has nothing to do with the fact that a file
might be a regular file or not and if it supports non-blocking
operations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230620113235.920399-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that this only checks O_NONBLOCK and FMODE_NOWAIT, the helper is
complete overkilļ, and the comments are confusing bordering to wrong.
Just inline the check into the caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230620113235.920399-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
sort() in Linux is based on heapsort which is not a stable sort
algorithm - equal elements are being reordered. For reserved memory in
the device tree this happens mainly for dynamic allocations: They do not
have an address to sort with, so they are reordered somewhat randomly
when adding/removing other unrelated reserved memory nodes.
Functionally this is not a big problem, but it's confusing during
development when all the addresses change after adding unrelated
reserved memory nodes.
Make the order stable by sorting dynamic allocations according to
the node order in the device tree. Static allocations are not affected
by this because they are still sorted by their (fixed) address.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230510-dt-resv-bottom-up-v2-2-aeb2afc8ac25@gerhold.net
Signed-off-by: Rob Herring <robh@kernel.org>
Right now dynamic reserved memory regions are allocated either
bottom-up or top-down, depending on the memblock setting of the
architecture. This is fine when the address is arbitrary. However,
when using "alloc-ranges" the regions are often placed somewhere
in the middle of (free) RAM, even if the range starts or ends next
to another (static) reservation.
Try to detect this situation, and choose explicitly between bottom-up
or top-down to allocate the memory close to the other reservations:
1. If the "alloc-range" starts at the end or inside an existing
reservation, use bottom-up.
2. If the "alloc-range" ends at the start or inside an existing
reservation, use top-down.
3. If both or none is the case, keep the current
(architecture-specific) behavior.
There are plenty of edge cases where only a more complex algorithm
would help, but even this simple approach helps in many cases to keep
the reserved memory (and therefore also the free memory) contiguous.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230510-dt-resv-bottom-up-v2-1-aeb2afc8ac25@gerhold.net
Signed-off-by: Rob Herring <robh@kernel.org>
Amir has implemented lots of features in overlayfs and is very active in
maintenance.
Make this official in the MAINTAINERS file.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Using the old mount api to remount an overlayfs superblock via
mount(MS_REMOUNT) all mount options will be silently ignored. For
example, if you create an overlayfs mount:
mount -t overlay overlay -o lowerdir=/mnt/a:/mnt/b,upperdir=/mnt/upper,workdir=/mnt/work /mnt/merged
and then issue a remount via:
# force mount(8) to use mount(2)
export LIBMOUNT_FORCE_MOUNT2=always
mount -t overlay overlay -o remount,WOOTWOOT,lowerdir=/DOESNT-EXIST /mnt/merged
with completely nonsensical mount options whatsoever it will succeed
nonetheless. This prevents us from every changing any mount options we
might introduce in the future that could reasonably be changed during a
remount.
We don't need to carry this issue into the new mount api port. Similar
to FUSE we can use the fs_context::oldapi member to figure out that this
is a request coming through the legacy mount api. If we detect it we
continue silently ignoring all mount options.
But for the new mount api we simply report that mount options cannot
currently be changed. This will allow us to potentially alter mount
properties for new or even old properties. It any case, silently
ignoring everything is not something new apis should do.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
thread.bad_cause is saved in arch_uprobe_pre_xol(), it should be restored
in arch_uprobe_{post,abort}_xol() accordingly, otherwise the save operation
is meaningless, this change is similar with x86 and powerpc.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Fixes: 74784081aa ("riscv: Add uprobes supported")
Link: https://lore.kernel.org/r/1682214146-3756-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Attempt VMA lock-based page fault handling first, and fall back to the
existing mmap_lock-based handling if that fails.
A simple running the ebizzy benchmark on Lichee Pi 4A shows that
PER_VMA_LOCK can improve the ebizzy benchmark by about 32.68%. In
theory, the more CPUs, the bigger improvement, but I don't have any
HW platform which has more than 4 CPUs.
This is the riscv variant of "x86/mm: try VMA lock-based page fault
handling first".
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Link: https://lore.kernel.org/r/20230523165942.2630-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When probing for an ACPI-specified IPMI device, the code would request
that the acpi_ipmi module be loaded ACPI operations through IPMI can be
performed. This could happen through module load context, for instance,
if an I2C module is loaded that caused the IPMI interface to be probed.
This is not allowed because a synchronous module load in this context
can result in an deadlock, and I was getting a warning:
[ 23.967853] WARNING: CPU: 0 PID: 21 at kernel/module/kmod.c:144 __request_module+0x1de/0x2d0
[ 23.968852] Modules linked in: i2c_i801 ipmi_ssif
The IPMI driver is not dependent on acpi_ipmi, so just change the called
to request_module_nowait to make the load asynchronous.
Signed-off-by: Corey Minyard <minyard@acm.org>
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint. Also absolute path
starting with /schemas is preferred.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230609140754.65158-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint. Also absolute path
starting with /schemas is preferred.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230609140749.65102-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Now that the driver core allows for struct class to be in read-only
memory, move the ipmi_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Corey Minyard <minyard@acm.org>
Cc: openipmi-developer@lists.sourceforge.net
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Message-Id: <20230620143701.577657-2-gregkh@linuxfoundation.org>
Signed-off-by: Corey Minyard <minyard@acm.org>
A recent patch incorrectly did not include IB_ACCESS_RELAXED_ORDERING in
the list of supported access flags for the rxe driver. The driver actually
does nothing related to relaxed ordering but it causes no problems to
include it as supported but with no effect. This change caused ib_send_bw
and friends to not run correctly.
The correct approach is for the driver to allow any of the optional access
flags and otherwise ignore them. This patch adds IB_ACCESS_OPTIONAL to the
list of rxe supported flags.
Fixes: 02ed253770 ("RDMA/rxe: Introduce rxe access supported flags")
Link: https://lore.kernel.org/r/20230613171654.19334-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230609140655.64529-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
The current way how lowcomms is configured is due configfs entries. Each
comms configfs entry will create a lowcomms connection. Even the local
connection itself will be stored as a lowcomms connection, although most
functionality for a local lowcomms connection struct is not necessary.
Now in some scenarios we will see that dlm_controld reports a -EEXIST
when configure a node via configfs:
... /sys/kernel/config/dlm/cluster/comms/1/addr: write failed: 17 -1
Doing a:
cat /sys/kernel/config/dlm/cluster/comms/1/addr_list
reported nothing. This was being seen on cluster with nodeid 1 and it's
local configuration. To be sure the configfs entries are in sync with
lowcomms connection structures we always call dlm_midcomms_close() to be
sure the lowcomms connection gets removed when the configfs entry gets
dropped.
Before commit 07ee38674a ("fs: dlm: filter ourself midcomms calls") it
was just doing this by accident and the filter by doing:
if (nodeid == dlm_our_nodeid())
return 0;
inside dlm_midcomms_close() was never been hit because drop_comm() sets
local_comm to NULL and cause that dlm_our_nodeid() returns always the
invalid nodeid 0.
Fixes: 07ee38674a ("fs: dlm: filter ourself midcomms calls")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
There is a spelling mistake in a dev_err message. Fix it. Also fix
grammar and add space between last word and (%d)".
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20230620095620.2522058-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>:
This patchset adds compressed offload support to Qualcomm audioreach drivers.
Currently it supports AAC, MP3 and FALC along with gapless.
Tested this on SM8450 and sc7280.
Merge series from Mark Brown <broonie@kernel.org>:
Several of the Everest Semi CODECs only support single register read and
write operations and therefore do not benefit from using the rbtree
cache over the maple tree cache, convert them to the more modern maple
tree cache.
Merge series from Mark Brown <broonie@kernel.org>:
Many of the Realtek I2C/SPI devices only support single register read
and write operations so don't benefit from using the rbtree cache
instead of the more modern maple tree cache, convert them to maple tree.
Now that the driver core allows for struct class to be in read-only
memory, move the hidg_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at load time.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230620094412.508580-11-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the driver core allows for struct class to be in read-only
memory, move the usb_gadget_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at load time.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230620094412.508580-10-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the driver core allows for struct class to be in read-only
memory, move the mon_bin_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at load time.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230620094412.508580-9-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the driver core allows for struct class to be in read-only
memory, move the udc_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at load time.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230620094412.508580-8-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the driver core allows for struct class to be in read-only
memory, move the role_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at load time.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230620094412.508580-7-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The hibernation feature enabled for Xilinx Versal NET SoC in DWC3 IP.
As the DWC3 IP supports the hibernation feature, to handle the wakeup
or hibernation interrupt, add host mode "wakeup" interrupt-names
optional property in the binding schema to capture remote-wakeup and
connect/ disconnect event in the hibernation state and increased maxItems
to 4 for the interrupts and interrupt-names property.
We have a dedicated IRQ line specifically for the hibernation feature.
When the "wakeup" IRQ line is triggered, it initiates a hibernation
interrupt, causing the system to wake up from the hibernation state.
Signed-off-by: Piyush Mehta <piyush.mehta@amd.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230619105032.2888128-1-piyush.mehta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In previous patches we removed 5G code since the hardware that uses this
driver does not support 5G. There is still some 5G related code, remove it.
All the removed defines are unused and we can safely remove "N-5G" from the
rtllib_modes array.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20230619155203.6039-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove a comparison to true reported by checkpatch.
CHECK: Using comparison to true is error prone
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20230619150953.22484-5-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unnecessary return statement from the void function
rtl92e_config_mac(). Issue found by checkpatch.
WARNING: void function return statements are not generally useful
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20230619150953.22484-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert a sequence of else if statements that all check the same
variable to a single switch statement. With a switch statement it is
easier to see what is going on. Additionally this clears a checkpatch
warning.
WARNING: braces {} are not necessary for any arm of this statement
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20230619150953.22484-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clean up brace coding style in if/else statements to improve
readability and clear checkpatch issues.
CHECK: braces {} should be used on all arms of this statement
CHECK: Unbalanced braces around else statement
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20230619150953.22484-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the following checkpatch blank line issues:
- CHECK: Please don't use multiple blank lines
- CHECK: Blank lines aren't necessary before a close brace '}'
- CHECK: Blank lines aren't necessary after an open brace '{'
Signed-off-by: Franziska Naepelt <franziska.naepelt@gmail.com>
Link: https://lore.kernel.org/r/20230619181246.19112-1-franziska.naepelt@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Additional declaration of struct vchiq_instance was introduced in the
commit 726e79f8a6 ("staging: vchiq_arm: pass vchiq instance to
service callbacks"). Drop the extra declaration.
Fixes: 726e79f8a6 ("staging: vchiq_arm: pass vchiq instance to service callbacks")
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Link: https://lore.kernel.org/r/20221221074047.233473-1-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
smatch warning:
drivers/accel/qaic/qaic_data.c:620 qaic_free_object() error:
dereferencing freed memory 'obj->import_attach'
obj->import_attach is detached and freed using dma_buf_detach().
But used after free to decrease the dmabuf ref count using
dma_buf_put().
drm_prime_gem_destroy() handles this issue and performs the proper clean
up instead of open coding it in the driver.
Fixes: ff13be8303 ("accel/qaic: Add datapath")
Reported-by: Sukrut Bellary <sukrut.bellary@linux.com>
Closes: https://lore.kernel.org/all/20230610021200.377452-1-sukrut.bellary@linux.com/
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230614161528.11710-1-quic_jhugo@quicinc.com