Klocwork reported array 'port_dstate_str' of size 10 may use index value(s)
10..15.
Add a fix to correct the index of array.
Cc: stable@vger.kernel.org
Signed-off-by: Bikash Hazarika <bhazarika@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230607113843.37185-8-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Klocwork tool reported pointer 'rport' returned from call to function
fc_bsg_to_rport() may be NULL and will be dereferenced.
Add a fix to validate rport before dereferencing.
Cc: stable@vger.kernel.org
Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230607113843.37185-7-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Klocwork warning: Buffer Overflow - Array Index Out of Bounds
Driver uses fc_els_flogi to calculate size of buffer. The actual buffer is
nested inside of fc_els_flogi which is smaller.
Replace structure name to allow proper size calculation.
Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230607113843.37185-6-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Klocwork reported warning of rport maybe NULL and will be dereferenced.
rport returned by call to fc_bsg_to_rport() could be NULL and dereferenced.
Check valid rport returned by fc_bsg_to_rport().
Cc: stable@vger.kernel.org
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230607113843.37185-5-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Klocwork reported warning of NULL pointer may be dereferenced. The routine
exits when sa_ctl is NULL and fcport is allocated after the exit call thus
causing NULL fcport pointer to dereference at the time of exit.
To avoid fcport pointer dereference, exit the routine when sa_ctl is NULL.
Cc: stable@vger.kernel.org
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230607113843.37185-4-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In the error exits in target_setup_session(), if a branch is taken to
free_sess: transport_free_session() may call to target_free_cmd_counter()
and then fall through to call target_free_cmd_counter() a second time.
This can, and does, sometimes cause seg faults since the data field in
cmd_cnt->refcnt has been freed in the first call.
Fix this problem by simply returning after the call to
transport_free_session(). The second call is redundant for those cases.
Fixes: 4edba7e4a8 ("scsi: target: Move cmd counter allocation")
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Link: https://lore.kernel.org/r/20230613144259.12890-1-rpearsonhpe@gmail.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hyper-V synthetic SCSI devices do not support the MAINTENANCE_IN SCSI
command, so scsi_report_opcode() always fails, resulting in messages like
this:
hv_storvsc <guid>: tag#205 cmd 0xa3 status: scsi 0x2 srb 0x86 hv 0xc0000001
The recently added support for command duration limits calls
scsi_report_opcode() four times as each device comes online, which
significantly increases the number of messages logged in a system with many
disks.
Fix the problem by always marking Hyper-V synthetic SCSI devices as not
supporting scsi_report_opcode(). With this setting, the MAINTENANCE_IN SCSI
command is not issued and no messages are logged.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1686343101-18930-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Replace of_get_property() and of_translate_address() calls with a single
call to of_address_to_resource().
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230406010738.1269781-1-robh@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The tegra and tegra needs to be freed in the error handling path, otherwise
it will be leaked.
Fixes: 2db04f16b5 ("clk: tegra: Add EMC clock driver")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221209094124.71043-1-yuancan@huawei.com
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Fix the I/O hang that arises because of the MSIx vector not having a mapped
online CPU upon receiving completion.
SCSI cmds take the blk_mq route, which is setup during init. Reserved cmds
fetch the vector_no from mq_map after init is complete. Before init, they
have to use 0 - as per the norm.
Reviewed-by: Gilbert Wu <gilbert.wu@microchip.com>
Signed-off-by: Sagar Biradar <Sagar.Biradar@microchip.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230519230834.27436-1-sagar.biradar@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Minor cosmetic change, aligned with files in U-Boot:
- change obsolete SPDX id : GPL-2.0+ and use the same license
GPL-2.0-only for the 2 files
- use correct mail address gabriel.fernandez@foss.st.com
- remove extra space
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20230510184305.v2.1.I417093ddcea282be479f10a37147d1935a9050b7@changeid
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Include the header file linux/of_address.h to avoid compilation errors
triggered by of_property_read_reg() being undeclared.
Fixes: d0b2461678 ("ata: Use of_property_read_reg() to parse "reg"")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306141702.ZaO9V2lk-lkp@intel.com/
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Smatch detected this potential error pointer dereference
clk_wzrd_register_divider(). If devm_clk_hw_register() fails then
it sets "hw" to an error pointer and then dereferences it on the
next line. Return the error directly instead.
Fixes: 5a853722eb ("staging: clocking-wizard: Add support for dynamic reconfiguration")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/f0e39b5c-4554-41e0-80d9-54ca3fabd060@kili.mountain
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
sparse points out an embarrasing bug in an older patch of mine,
which uses the register offset instead of an __iomem pointer:
drivers/clk/pxa/clk-pxa3xx.c:167:9: sparse: sparse: Using plain integer as NULL pointer
Unlike sparse, gcc and clang ignore this bug and fail to warn
because a literal '0' is considered a valid representation of
a NULL pointer.
Fixes: 3c816d950a ("ARM: pxa: move clk register definitions to driver")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202305111301.RAHohdob-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230511105845.299859-1-arnd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Smatch detected an off by one in this code:
drivers/clk/bcm/clk-raspberrypi.c:374 raspberrypi_discover_clocks()
error: buffer overflow 'data->hws' 16 <= 16
The data->hws[] array has RPI_FIRMWARE_NUM_CLK_ID elements so the >
comparison needs to changed to >=.
Fixes: 12c90f3f27 ("clk: bcm: rpi: Add variant structure")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/5a850b08-d2f5-4794-aceb-a6b468965139@kili.mountain
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Convert platform_get_resource(),devm_ioremap_resource() to a single
call to devm_platform_ioremap_resource(), as this is exactly what this
function does.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230428070005.41192-1-yang.lee@linux.alibaba.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Use separate local variables to hold the respective values retrieved from
the Link Control Register and the Link Status Register. Improves
readability and it makes it possible for the compiler to detect actual
uninitialised use should this code change in the future.
[bhelgaas: reorder to clean up before exposing to PCI core]
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2306110252260.64925@angie.orcam.me.uk
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Use dev->link_active_reporting to determine whether Data Link Layer Link
Active Reporting is available rather than re-retrieving the capability.
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2305310125370.59226@angie.orcam.me.uk
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Use dev->link_active_reporting to determine whether Data Link Layer Link
Active Reporting is available rather than re-retrieving the capability.
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2305310124100.59226@angie.orcam.me.uk
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Use dev->link_active_reporting to determine whether Data Link Layer Link
Active Reporting is available rather than re-retrieving the capability.
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2305310028150.59226@angie.orcam.me.uk
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Determine whether Data Link Layer Link Active Reporting is available before
calling any fixups so that the cached value can be used there and later on.
[bhelgaas: move to set_pcie_port_type() where other PCIe init is done]
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2305310122210.59226@angie.orcam.me.uk
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
addr2line may fail to send expected values causing perf to wait
indefinitely. Add a 1 second timeout (twice the timeout for reading from
/proc/pid/maps) so that such reads don't cause perf to appear to lock
up.
There are already checks that the file for addr2line contains a debug
section but this isn't always sufficient. The problem was observed when
a valid elf file would set the configuration for binutils addr2line,
then a later read of vmlinux with ELF debug sections would cause a
failing write/read which would block indefinitely.
As a service to future readers, if the io hits eof or an error, cleanup
the addr2line process.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20230608061812.3715566-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In situations like reading from a pipe it can be useful to have a
timeout so that the caller doesn't block indefinitely. Implement a
simple one based on poll.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: http://lore.kernel.org/lkml/20230608061812.3715566-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Found by leak sanitizer:
```
==1632594==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 21 byte(s) in 1 object(s) allocated from:
#0 0x7f2953a7077b in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:439
#1 0x556701d6fbbf in perf_env__read_cpuid util/env.c:369
#2 0x556701d70589 in perf_env__cpuid util/env.c:465
#3 0x55670204bba2 in x86__is_amd_cpu arch/x86/util/env.c:14
#4 0x5567020487a2 in arch__post_evsel_config arch/x86/util/evsel.c:83
#5 0x556701d8f78b in evsel__config util/evsel.c:1366
#6 0x556701ef5872 in evlist__config util/record.c:108
#7 0x556701cd6bcd in test__PERF_RECORD tests/perf-record.c:112
#8 0x556701cacd07 in run_test tests/builtin-test.c:236
#9 0x556701cacfac in test_and_print tests/builtin-test.c:265
#10 0x556701cadddb in __cmd_test tests/builtin-test.c:402
#11 0x556701caf2aa in cmd_test tests/builtin-test.c:559
#12 0x556701d3b557 in run_builtin tools/perf/perf.c:323
#13 0x556701d3bac8 in handle_internal_command tools/perf/perf.c:377
#14 0x556701d3be90 in run_argv tools/perf/perf.c:421
#15 0x556701d3c3f8 in main tools/perf/perf.c:537
#16 0x7f2952a46189 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
SUMMARY: AddressSanitizer: 21 byte(s) leaked in 1 allocation(s).
```
Fixes: f7b58cbdb3 ("perf mem/c2c: Add load store event mappings for AMD")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Ravi Bangoria <ravi.bangoria@amd.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20230613235416.1650755-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Polarfire:
- new Kconfig symbol name (SOC_MICROCHIP_POLARFIRE) for Microchip FPGA
clock drivers
PIC32:
- use of_property_read_bool() to read "microchip,pic32mzda-sosc" boolean
DT property in clk-pic32mzda
AT91:
- convert clock dt-bindings to YAML
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCZIbdSAAKCRCejrg/N2X7
/Z1YAP0dB3oouxYfkobwo8aNGITJexaN9cR27nrwdIsUBY75JAD+K5grvxQGzfwx
2gkcNIVx8R/tmA/PdO3jRDXL3VLmPQo=
=cHai
-----END PGP SIGNATURE-----
Merge tag 'clk-microchip-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into clk-microchip
Pull Microchip clk driver updates from Claudiu Beznea:
Polarfire:
- new Kconfig symbol name (SOC_MICROCHIP_POLARFIRE) for Microchip FPGA
clock drivers
PIC32:
- use of_property_read_bool() to read "microchip,pic32mzda-sosc" boolean
DT property in clk-pic32mzda
AT91:
- convert clock dt-bindings to YAML
* tag 'clk-microchip-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
dt-bindings: clocks: at91sam9x5-sckc: convert to yaml
dt-bindings: clocks: atmel,at91rm9200-pmc: convert to yaml
clk: microchip: Use of_property_read_bool() for boolean properties
clk: microchip: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIRE
- Remove CLK_SET_RATE_PARENT flag from LDB clocks on i.MX6SX
- Keep UART clocks enabled during kernel boot if earlycon is set
- Drop the imx_unregister_clocks as there are no users for it
- Switch to _safe iterator on imx_clk_scu_unregister to avoid use after free
- Add determine_rate op to the imx8m composite clock
- Use device managed API for iomap and kzalloc for i.MXRT1050,
i.MX8MN, i.MX8MP and i.MX93 clock controller drivers
- Add missing interrupt DT property for the i.MX8M clock controller
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEdRlgxHYCb3ovKt456LNSLBEEo7YFAmSJrSQACgkQ6LNSLBEE
o7alDxAAnmaNybOvV+StMxZ9Q/3b7OQef/2597rlwTdX0TgiJywil/3z2slS6BpV
shq3tY9ANRkele0vSKdbFUGqR6VlyAQ+yoIYxa+QOhxksJEfUeXCbN0bIn28ipc2
HtBokoG8iBFY9JHDA9AC3eWeWP4yzjrYs+ojV2JlKgDuXtKcasn+LahTiGUEKFF6
vzsOiZQm83NNHdsn4cpfPGDsLBkbtWy4OdlaBRxGNn0ZeFIvZ2CeZslk29sMPftD
dLo7nAgCDnl7oMZ6gr3a9P4HgV5wcuB7rjH8TwGHjepj1/SqsekZhNbcgCcVvG6f
/1UIq5slvkSyG1MmsuiyLD824rXtEDrp+I2y7xj8TRVMynmPa7/sAaCRgwsGkXUk
RGBteV24Ef18c2OWrm174HcHxA2Nmxg/W6H18JWVFt/CnGb1/IV2pHmfM64YCKjz
00TJl5Hd9BsTDMnA/nKs2lfjbkCkHL2BX8WwMqmQvqjzY0NBiNplewB9+8c6DN5Y
CKiL+7kDuRgIk83Ainsozt7EdMIxp9n1jgtXYjqdckvtqOkwSpll8B7OjtuXt/jV
DgaM4RAOQE5vekG/HyUr79ruApDawDIBWzLksKPj9iMX2gsDK9rttBBXWC9qEr4l
3gr/XHTHhqGExbwFLwh8xEjO0mzr7ThVpWQZmqBke90C58rn/f8=
=eunH
-----END PGP SIGNATURE-----
Merge tag 'clk-imx-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux into clk-imx
Pull i.MX clk driver updates from Abel Vesa:
- Remove CLK_SET_RATE_PARENT flag from LDB clocks on i.MX6SX
- Keep UART clocks enabled during kernel boot if earlycon is set
- Drop the imx_unregister_clocks as there are no users for it
- Switch to _safe iterator on imx_clk_scu_unregister to avoid use after free
- Add determine_rate op to the imx8m composite clock
- Use device managed API for iomap and kzalloc for i.MXRT1050,
i.MX8MN, i.MX8MP and i.MX93 clock controller drivers
- Add missing interrupt DT property for the i.MX8M clock controller
* tag 'clk-imx-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux:
clk: imx: clk-imx8mp: improve error handling in imx8mp_clocks_probe()
clk: imx93: fix memory leak and missing unwind goto in imx93_clocks_probe
clk: imx: clk-imx8mn: fix memory leak in imx8mn_clocks_probe
dt-bindings: clock: imx8m: Add missing interrupt property
clk: imx: clk-imxrt1050: fix memory leak in imxrt1050_clocks_probe
clk: imx: composite-8m: Add imx8m_divider_determine_rate
clk: imx: scu: use _safe list iterator to avoid a use after free
clk: imx: drop imx_unregister_clocks
clk: imx6ul: retain early UART clocks during kernel init
clk: imx: imx6sx: Remove CLK_SET_RATE_PARENT from the LDB clocks
ASM_NL is useful not only in *.S files but also in .c files for using
inline assembler in C code.
On ARC, however, ASM_NL is evaluated inconsistently. It is expanded to
a backquote (`) in *.S files, but a semicolon (;) in *.c files because
arch/arc/include/asm/linkage.h defines it inside #ifdef __ASSEMBLY__,
so the definition for C code falls back to the default value defined in
include/linux/linkage.h.
If ASM_NL is used in inline assembler in .c files, it will result in
wrong assembly code because a semicolon is not an instruction separator,
but the start of a comment for ARC.
Move ASM_NL (also __ALIGN and __ALIGN_STR) out of the #ifdef.
Fixes: 9df62f0544 ("arch: use ASM_NL instead of ';' for assembler new line character in the macro")
Fixes: 8d92e992a7 ("ARC: define __ALIGN_STR and __ALIGN symbols for ARC")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
You do not need to decide the buffer size statically.
Use getline() to grow the line buffer as needed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
This reverts commit cead61a671.
It exported __stack_smash_handler and __guard, while they may not be
defined by anyone.
The code *declares* __stack_smash_handler and __guard. It does not
create weak symbols. If no external library is linked, they are left
undefined, but yet exported.
If a loadable module tries to access non-existing symbols, bad things
(a page fault, NULL pointer dereference, etc.) will happen. So, the
current code is wrong and dangerous.
If the code were written as follows, it would *define* them as weak
symbols so modules would be able to get access to them.
void (*__stack_smash_handler)(void *) __attribute__((weak));
EXPORT_SYMBOL(__stack_smash_handler);
long __guard __attribute__((weak));
EXPORT_SYMBOL(__guard);
In fact, modpost forbids exporting undefined symbols. It shows an error
message if it detects such a mistake.
ERROR: modpost: "..." [...] was exported without definition
Unfortunately, it is checked only when the code is built as modular.
The problem described above has been unnoticed for a long time because
arch/um/os-Linux/user_syms.c is always built-in.
With a planned change in Kbuild, exporting undefined symbols will always
result in a build error instead of a run-time error. It is a good thing,
but we need to fix the breakage in advance.
One fix is to define weak symbols as shown above. An alternative is to
export them conditionally as follows:
#ifdef CONFIG_STACKPROTECTOR
extern void __stack_smash_handler(void *);
EXPORT_SYMBOL(__stack_smash_handler);
external long __guard;
EXPORT_SYMBOL(__guard);
#endif
This is what other architectures do; EXPORT_SYMBOL(__stack_chk_guard)
is guarded by #ifdef CONFIG_STACKPROTECTOR.
However, adding the #ifdef guard is not sensible because UML cannot
enable the stack-protector in the first place! (Please note UML does
not select HAVE_STACKPROTECTOR in Kconfig.)
So, the code is already broken (and unused) in multiple ways.
Just remove.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
The sprd_div_helper_round_rate() function calls divider_round_rate()
which calls divider_round_rate_parent() which calls
divider_determine_rate(). This call chain converts back and forth from
the rate request structure to make a determine_rate clk_op fit with a
round_rate clk_op. Simplify the code here by directly calling
divider_determine_rate() instead.
This fixes a smatch warning where an unsigned long is compared to less
than zero, which is impossible. This makes sprd_div_helper_round_rate()
unnecessary as well so simply remove it and fold it into the only caller
left.
Reported-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Closes: https://lore.kernel.org/r/45fdc54e-7ab6-edd6-d55a-473485608473@oracle.com
Cc: Maxime Ripard <maxime@cerno.tech>
Fixes: 302d2f836d ("clk: sprd: composite: Switch to determine_rate")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20230613195443.1555132-1-sboyd@kernel.org
Reviewed-by: Maxime Ripard <mripard@kernel.org>
When HEADER_ARCH was introduced, the MRPROPER_FILES (then MRPROPER_DIRS)
list wasn't adjusted, leaving SUBARCH as part of the path argument.
This resulted in the "mrproper" target not cleaning up arch/x86/... when
SUBARCH was specified. Since HOST_DIR is arch/$(HEADER_ARCH), use it
instead to get the correct path.
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Azeem Shaikh <azeemshaikh38@gmail.com>
Cc: linux-um@lists.infradead.org
Fixes: 7bbe7204e9 ("um: merge Makefile-{i386,x86_64}")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230606222442.never.807-kees@kernel.org
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230530163041.985456-1-azeemshaikh38@gmail.com
Merge series from Chen-Yu Tsai <wenst@chromium.org>:
This series is a cleanup and improvement of the MT6358 regulator driver.
Various discrepancies were found while preparing to upstream MT8186
device trees, which utilize the MT6366 PMIC, that is also covered by
this driver.
Patches 1~8 should go through the regulator tree, and patch 9 through
the soc tree.
This series can be seen as two parts:
Part 1 - Fixing bogus regulators (patches 1~4 and 9)
There are some regulators listed in the bindings and driver that have no
corresponding pin on the actual hardware. MediaTek says these are a
hardware construct for shared control of the same regulator in the
VCN33 case and an alternative control scheme for low power suspend.
In the VCN33 case, there's only one actual regulator, so we merge the
two and rename them to match the hardware pin. No existing devices use
these AFAICT, so this should be safe to change.
In the *_SSHUB case, the two extra regulators refer to alternative
configuration registers of the same regulators. They are intended for
the SoC's low power mode companion processor to use, not the main
processor or OS. It should be left to the implementation to choose
which set of registers to actually control.
Part 2 - Code cleanup (patches 5 and 6)
Various tables in the regulator driver were not constant, even though
they are just lookup tables. With some reworking of the code, they are
made constant.
Also, some regulators that have a single linear range were using linear
range helpers. This is more complicated than just declaring the range
and step directly in the description. This is simplified to use the
latter approach.
Please have a look. After this series is done I'll send out patches for
the MT6366 PMIC, which is what started this. That will also include
updated YAML bindings for MT6366. I think we can merge MT6358 bindings
into them afterwards.
[1] https://lore.kernel.org/linux-arm-kernel/20230609075032.2804554-1-wenst@chromium.org/
A recent fix stopped clearing PF_IO_WORKER from current->flags on exit,
which meant that we can now call inc/dec running on the worker after it
has been removed if it ends up scheduling in/out as part of exit.
If this happens after an RCU grace period has passed, then the struct
pointed to by current->worker_private may have been freed, and we can
now be accessing memory that is freed.
Ensure this doesn't happen by clearing the task worker_private field.
Both io_wq_worker_running() and io_wq_worker_sleeping() check this
field before going any further, and we don't need any accounting etc
done after this worker has exited.
Fixes: fd37b88400 ("io_uring/io-wq: don't clear PF_IO_WORKER on exit")
Reported-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add check for the return value of kstrdup() and return the error
if it fails in order to avoid NULL pointer dereference.
Fixes: e163fdb3f7 ("pstore/ram: Regularize prz label allocation lifetime")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230614093733.36048-1-jiasheng@iscas.ac.cn
The Linux build process on x86 roughly consists of compiling all input
files, statically linking them into a vmlinux ELF file, and then taking
and turning this file into an actual bzImage bootable file.
vmlinux has in this process two main purposes:
1) It is an intermediate build target on the way to produce the final
bootable image.
2) It is a file that is expected to be used by debuggers and standard
ELF tooling to work with the built kernel.
For the second purpose, a vmlinux file is typically collected by various
package build recipes, such as distribution spec files, including the
kernel's own tar-pkg target.
When building a kernel supporting KASLR with CONFIG_X86_NEED_RELOCS,
vmlinux contains also relocation information produced by using the
--emit-relocs linker option. This is utilized by subsequent build steps
to create vmlinux.relocs and produce a relocatable image. However, the
information is not needed by debuggers and other standard ELF tooling.
The issue is then that the collected vmlinux file and hence distribution
packages end up unnecessarily large because of this extra data. The
following is a size comparison of vmlinux v6.0 with and without the
relocation information:
| Configuration | With relocs | Stripped relocs |
| x86_64_defconfig | 70 MB | 43 MB |
| +CONFIG_DEBUG_INFO | 818 MB | 367 MB |
Optimize a resulting vmlinux by adding a postlink step that splits the
relocation information into vmlinux.relocs and then strips it from the
vmlinux binary.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20220927084632.14531-1-petr.pavlu@suse.com
Now user_events auto-cleanup upon the last reference by default. This
makes it not possible to use the dynamics event file via tracefs.
Document that auto-cleanup is enabled by default and remove the refernce
to /sys/kernel/tracing/dynamic_events file to make this clear.
Link: https://lkml.kernel.org/r/20230614163336.5797-7-beaub@linux.microsoft.com
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Now that user_events does not honor persist events the dynamic_events
file cannot be easily used to test parsing and matching cases.
Update dyn_test to use the direct ABI file instead of dynamic_events so
that we still have testing coverage until persist events and
dynamic_events file integration has been decided.
Link: https://lkml.kernel.org/r/20230614163336.5797-6-beaub@linux.microsoft.com
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
User events now auto cleanup upon the last reference put. Update
ftrace_test to ensure this works as expected. Ensure EBUSY delays
while event is being deleted do not cause transient failures by
waiting and re-attempting.
Link: https://lkml.kernel.org/r/20230614163336.5797-5-beaub@linux.microsoft.com
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently user events need to be manually deleted via the delete IOCTL
call or via the dynamic_events file. Most operators and processes wish
to have these events auto cleanup when they are no longer used by
anything to prevent them piling without manual maintenance. However,
some operators may not want this, such as pre-registering events via the
dynamic_events tracefs file.
Update user_event_put() to attempt an auto delete of the event if it's
the last reference. The auto delete must run in a work queue to ensure
proper behavior of class->reg() invocations that don't expect the call
to go away from underneath them during the unregister. Add work_struct
to user_event struct to ensure we can do this reliably.
Add a persist flag, that is not yet exposed, to ensure we can toggle
between auto-cleanup and leaving the events existing in the future. When
a non-zero flag is seen during register, return -EINVAL to ensure ABI
is clear for the user processes while we work out the best approach for
persistent events.
Link: https://lkml.kernel.org/r/20230614163336.5797-4-beaub@linux.microsoft.com
Link: https://lore.kernel.org/linux-trace-kernel/20230518093600.3f119d68@rorschach.local.home/
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>