Commit graph

1,215,304 commits

Author SHA1 Message Date
Zahari Doychev
7cfffd5fed net: flower: add support for matching cfm fields
Add support to the tc flower classifier to match based on fields in CFM
information elements like level and opcode.

tc filter add dev ens6 ingress protocol 802.1q \
	flower vlan_id 698 vlan_ethtype 0x8902 cfm mdl 5 op 46 \
	action drop

Signed-off-by: Zahari Doychev <zdoychev@maxlinear.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12 17:01:45 -07:00
Zahari Doychev
d7ad70b5ef net: flow_dissector: add support for cfm packets
Add support for dissecting cfm packets. The cfm packet header
fields maintenance domain level and opcode can be dissected.

Signed-off-by: Zahari Doychev <zdoychev@maxlinear.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12 17:01:45 -07:00
Jakub Kicinski
fbf6f482b6 Merge branch 'mptcp-fixes'
Matthieu Baerts says:

====================
selftests: mptcp: skip tests not supported by old kernels (part 3)

After a few years of increasing test coverage in the MPTCP selftests, we
realised [1] the last version of the selftests is supposed to run on old
kernels without issues.

Supporting older versions is not that easy for this MPTCP case: these
selftests are often validating the internals by checking packets that
are exchanged, when some MIB counters are incremented after some
actions, how connections are getting opened and closed in some cases,
etc. In other words, it is not limited to the socket interface between
the userspace and the kernelspace.

In addition to that, the current MPTCP selftests run a lot of different
sub-tests but the TAP13 protocol used in the selftests don't support
sub-tests: one failure in sub-tests implies that the whole selftest is
seen as failed at the end because sub-tests are not tracked. It is then
important to skip sub-tests not supported by old kernels.

To minimise the modifications and reduce the complexity to support old
versions, the idea is to look at external signs and skip the whole
selftest or just some sub-tests before starting them. This cannot be
applied in all cases.

Similar to the second part, this third one focuses on marking different
sub-tests as skipped if some MPTCP features are not supported. This
time, only in "mptcp_join.sh" selftest, the remaining one, is modified.
Several techniques are used here to achieve this task:

- Before starting some tests:

  - Check if a file (sysctl knob) is present: that's what patch 12/17 is
    doing for the userspace PM feature.

  - Check if a required kernel symbol is present in /proc/kallsyms:
    patches 9, 10, 14 and 15/17 are using this technique.

  - Check if it is possible to setup a particular network environment
    requiring Netfilter or TC: if the preparation step fail, the linked
    sub-test is marked as skipped. Patch 5/17 is doing that.

  - Check if a MIB counter is available: patches 7 and 13/17 do that.

  - Check if the kernel version is newer than a specific one: patch 1/17
    adds some helpers in mptcp_lib.sh to ease its use. That's not ideal
    and it is only used as last resort but as mentioned above, it is
    important to skip tests if they are not supported not to have the
    whole selftest always being marked as failed on old kernels. Patches
    11 and 17/17 are checking the kernel version. An alternative would
    be to ignore the results for some sub-tests but that's not ideal
    too. Note that SELFTESTS_MPTCP_LIB_NO_KVERSION_CHECK env var can be
    set to 1 not to skip these tests if the running kernel doesn't have
    a supported version.

- After having launched the tests:

  - Adapt the expectations depending on the presence of a kernel symbol
    (patch 6/17) or a kernel version (patch 8/17).

  - Check is a MIB counter is available and skip the verification if
    not. Patch 4/17 is using this technique.

Before skipping tests, SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var
value is checked: if it is set to 1, the test is marked as "failed"
instead of "skipped". MPTCP public CI expects to have all features
supported and it sets this env var to 1 to catch regressions in these
new checks.

Patch 2/17 uses 'iptables-legacy' if available because it might be
needed when using an older kernel not supporting iptables-nft.

Patch 3/17 adds some helpers used in the other patches mentioned to
easily mark sub-tests as skipped.

Patch 16/17 uniforms MPTCP Join "listener" tests: it was imported code
from userspace_pm.sh but without using the "code style" and ways of
using tools and printing messages from MPTCP Join selftest.

Link: https://lore.kernel.org/stable/CA+G9fYtDGpgT4dckXD-y-N92nqUxuvue_7AtDdBcHrbOMsDZLg@mail.gmail.com/ [1]
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
====================

Link: https://lore.kernel.org/r/20230609-upstream-net-20230610-mptcp-selftests-support-old-kernels-part-3-v1-0-2896fe2ee8a3@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12 16:55:45 -07:00
Matthieu Baerts
6673851be0 selftests: mptcp: join: skip mixed tests if not supported
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the support of a mix of subflows in v4 and v6 by the
in-kernel PM introduced by commit b9d69db87f ("mptcp: let the
in-kernel PM use mixed IPv4 and IPv6 addresses").

It looks like there is no external sign we can use to predict the
expected behaviour. Instead of accepting different behaviours and thus
not really checking for the expected behaviour, we are looking here for
a specific kernel version. That's not ideal but it looks better than
removing the test because it cannot support older kernel versions.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: ad3493746e ("selftests: mptcp: add test-cases for mixed v4/v6 subflows")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12 16:55:43 -07:00
Matthieu Baerts
96b84195df selftests: mptcp: join: uniform listener tests
The alignment was different from the other tests because tabs were used
instead of spaces.

While at it, also use 'echo' instead of 'printf' to print the result to
keep the same style as done in the other sub-tests. And, even if it
should be better with, also remove 'stdbuf' and sed's '--unbuffered'
option because they are not used in the other subtests and they are not
available when using a minimal environment with busybox.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 178d023208 ("selftests: mptcp: listener test for in-kernel PM")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12 16:55:43 -07:00
Matthieu Baerts
0471bb479a selftests: mptcp: join: skip PM listener tests if not supported
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the support of PM listener events introduced by commit
f8c9dfbd87 ("mptcp: add pm listener events").

It is possible to look for "mptcp_event_pm_listener" in kallsyms to know
in advance if the kernel supports this feature.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 178d023208 ("selftests: mptcp: listener test for in-kernel PM")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12 16:55:43 -07:00
Matthieu Baerts
632978f0a9 selftests: mptcp: join: skip MPC backups tests if not supported
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the support of sending an MP_PRIO signal for the initial
subflow, introduced by commit c157bbe776 ("mptcp: allow the in kernel
PM to set MPC subflow priority").

It is possible to look for "mptcp_subflow_send_ack" in kallsyms because
it was needed to introduce the mentioned feature. So we can know in
advance if the feature is supported instead of trying and accepting any
results.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 914f6a59b1 ("selftests: mptcp: add MPC backup tests")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12 16:55:42 -07:00
Matthieu Baerts
ff8897b518 selftests: mptcp: join: skip fail tests if not supported
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the support of the MP_FAIL / infinite mapping introduced
by commit 1e39e5a32a ("mptcp: infinite mapping sending") and the
following ones.

It is possible to look for one of the infinite mapping counters to know
in advance if the this feature is available.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: b6e074e171 ("selftests: mptcp: add infinite map testcase")
Cc: stable@vger.kernel.org
Fixes: 2ba18161d4 ("selftests: mptcp: add MP_FAIL reset testcase")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12 16:55:42 -07:00
Matthieu Baerts
f2b492b04a selftests: mptcp: join: skip userspace PM tests if not supported
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the support of the userspace PM introduced by commit
4638de5aef ("mptcp: handle local addrs announced by userspace PMs")
and the following ones.

It is possible to look for the MPTCP pm_type's sysctl knob to know in
advance if the userspace PM is available.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 5ac1d2d634 ("selftests: mptcp: Add tests for userspace PM type")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12 16:55:42 -07:00
Matthieu Baerts
9db34c4294 selftests: mptcp: join: skip fullmesh flag tests if not supported
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the support of the fullmesh flag for the in-kernel PM
introduced by commit 2843ff6f36 ("mptcp: remote addresses fullmesh")
and commit 1a0d6136c5 ("mptcp: local addresses fullmesh").

It looks like there is no easy external sign we can use to predict the
expected behaviour. We could add the flag and then check if it has been
added but for that, and for each fullmesh test, we would need to setup a
new environment, do the checks, clean it and then only start the test
from yet another clean environment. To keep it simple and avoid
introducing new issues, we look for a specific kernel version. That's
not ideal but an acceptable solution for this case.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 6a0653b96f ("selftests: mptcp: add fullmesh setting tests")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12 16:55:42 -07:00
Matthieu Baerts
07216a3c5d selftests: mptcp: join: skip backup if set flag on ID not supported
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

Commit bccefb7624 ("selftests: mptcp: simplify pm_nl_change_endpoint")
has simplified the way the backup flag is set on an endpoint. Instead of
doing:

  ./pm_nl_ctl set 10.0.2.1 flags backup

Now we do:

  ./pm_nl_ctl set id 1 flags backup

The new way is easier to maintain but it is also incompatible with older
kernels not supporting the implicit endpoints putting in place the
infrastructure to set flags per ID, hence the second Fixes tag.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: bccefb7624 ("selftests: mptcp: simplify pm_nl_change_endpoint")
Cc: stable@vger.kernel.org
Fixes: 4cf86ae84c ("mptcp: strict local address ID selection")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12 16:55:42 -07:00
Matthieu Baerts
36c4127ae8 selftests: mptcp: join: skip implicit tests if not supported
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the support of the implicit endpoints introduced by
commit d045b9eb95 ("mptcp: introduce implicit endpoints").

It is possible to look for "mptcp_subflow_send_ack" in kallsyms because
it was needed to introduce the mentioned feature. So we can know in
advance if the feature is supported instead of trying and accepting any
results.

Note that here and in the following commits, we re-do the same check for
each sub-test of the same function for a few reasons. The main one is
not to break the ID assign to each test in order to be able to easily
compare results between different kernel versions. Also, we can still
run a specific test even if it is skipped. Another reason is that it
makes it clear during the review that a specific subtest will be skipped
or not under certain conditions. At the end, it looks OK to call the
exact same helper multiple times: it is not a critical path and it is
the same code that is executed, not really more cases to maintain.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 69c6ce7b6e ("selftests: mptcp: add implicit endpoint test case")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12 16:55:42 -07:00
Matthieu Baerts
425ba80312 selftests: mptcp: join: support RM_ADDR for used endpoints or not
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

At some points, a new feature caused internal behaviour changes we are
verifying in the selftests, see the Fixes tag below. It was not a UAPI
change but because in these selftests, we check some internal
behaviours, it is normal we have to adapt them from time to time after
having added some features.

It looks like there is no external sign we can use to predict the
expected behaviour. Instead of accepting different behaviours and thus
not really checking for the expected behaviour, we are looking here for
a specific kernel version. That's not ideal but it looks better than
removing the test because it cannot support older kernel versions.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 6fa0174a7c ("mptcp: more careful RM_ADDR generation")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12 16:55:42 -07:00
Matthieu Baerts
ae947bb2c2 selftests: mptcp: join: skip Fastclose tests if not supported
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the support of MP_FASTCLOSE introduced in commit
f284c0c773 ("mptcp: implement fastclose xmit path").

If the MIB counter is not available, the test cannot be verified and the
behaviour will not be the expected one. So we can skip the test if the
counter is missing.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 01542c9bf9 ("selftests: mptcp: add fastclose testcase")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12 16:55:42 -07:00
Matthieu Baerts
d4c81bbb86 selftests: mptcp: join: support local endpoint being tracked or not
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

At some points, a new feature caused internal behaviour changes we are
verifying in the selftests, see the Fixes tag below. It was not a uAPI
change but because in these selftests, we check some internal
behaviours, it is normal we have to adapt them from time to time after
having added some features.

It is possible to look for "mptcp_pm_subflow_check_next" in kallsyms
because it was needed to introduce the mentioned feature. So we can know
in advance what the behaviour we are expecting here instead of
supporting the two behaviours.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 86e39e0448 ("mptcp: keep track of local endpoint still available for each msk")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12 16:55:42 -07:00
Matthieu Baerts
4a0b866a3f selftests: mptcp: join: skip test if iptables/tc cmds fail
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

Some tests are using IPTables and/or TC commands to force some
behaviours. If one of these commands fails -- likely because some
features are not available due to missing kernel config -- we should
intercept the error and skip the tests requiring these features.

Note that if we expect to have these features available and if
SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var is set to 1, the tests
will be marked as failed instead of skipped.

This patch also replaces the 'exit 1' by 'return 1' not to stop the
selftest in the middle without the conclusion if there is an issue with
NF or TC.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 8d014eaa92 ("selftests: mptcp: add ADD_ADDR timeout test case")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12 16:55:42 -07:00
Matthieu Baerts
47867f0a7e selftests: mptcp: join: skip check if MIB counter not supported
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the MPTCP MIB counters introduced in commit fc518953bc
("mptcp: add and use MIB counter infrastructure") and more later. The
MPTCP Join selftest heavily relies on these counters.

If a counter is not supported by the kernel, it is not displayed when
using 'nstat -z'. We can then detect that and skip the verification. A
new helper (get_counter()) has been added to do the required checks and
return an error if the counter is not available.

Note that if we expect to have these features available and if
SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var is set to 1, the tests
will be marked as failed instead of skipped.

This new helper also makes sure we get the exact counter we want to
avoid issues we had in the past, e.g. with MPTcpExtRmAddr and
MPTcpExtRmAddrDrop sharing the same prefix. While at it, we uniform the
way we fetch a MIB counter.

Note for the backports: we rarely change these modified blocks so if
there is are conflicts, it is very likely because a counter is not used
in the older kernels and we don't need that chunk.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: b08fbf2410 ("selftests: add test-cases for MPTCP MP_JOIN")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12 16:55:42 -07:00
Matthieu Baerts
cdb5052534 selftests: mptcp: join: helpers to skip tests
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

Here are some helpers that will be used to mark subtests as skipped if a
feature is not supported. Marking as a fix for the commit introducing
this selftest to help with the backports.

While at it, also check if kallsyms feature is available as it will also
be used in the following commits to check if MPTCP features are
available before starting a test.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: b08fbf2410 ("selftests: add test-cases for MPTCP MP_JOIN")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12 16:55:42 -07:00
Matthieu Baerts
0c4cd3f86a selftests: mptcp: join: use 'iptables-legacy' if available
IPTables commands using 'iptables-nft' fail on old kernels, at least
5.15 because it doesn't see the default IPTables chains:

  $ iptables -L
  iptables/1.8.2 Failed to initialize nft: Protocol not supported

As a first step before switching to NFTables, we can use iptables-legacy
if available.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 8d014eaa92 ("selftests: mptcp: add ADD_ADDR timeout test case")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12 16:55:42 -07:00
Matthieu Baerts
b1a6a38ab8 selftests: mptcp: lib: skip if not below kernel version
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

A new function is now available to easily detect if a feature is
missing by looking at the kernel version. That's clearly not ideal and
this kind of check should be avoided as soon as possible. But sometimes,
there are no external sign that a "feature" is available or not:
internal behaviours can change without modifying the uAPI and these
selftests are verifying the internal behaviours. Sometimes, the only
(easy) way to verify if the feature is present is to run the test but
then the validation cannot determine if there is a failure with the
feature or if the feature is missing. Then it looks better to check the
kernel version instead of having tests that can never fail. In any case,
we need a solution not to have a whole selftest being marked as failed
just because one sub-test has failed.

Note that this env var car be set to 1 not to do such check and run the
linked sub-test: SELFTESTS_MPTCP_LIB_NO_KVERSION_CHECK.

This new helper is going to be used in the following commits. In order
to ease the backport of such future patches, it would be good if this
patch is backported up to the introduction of MPTCP selftests, hence the
Fixes tag below: this type of check was supposed to be done from the
beginning.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 048d19d444 ("mptcp: add basic kselftest for mptcp")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12 16:55:42 -07:00
Jakub Kicinski
4d17beb66b Merge branch 'fixes-for-q-usgmii-speeds-and-autoneg'
Maxime Chevallier says:

====================
fixes for Q-USGMII speeds and autoneg

This is the second version of a small changeset for QUSGMII support,
fixing inconsistencies in reported max speed and control word parsing.

As reported here [1], there are some inconsistencies for the Q-USGMII
mode speeds and configuration. The first patch in this fixup series
makes so that we correctly report the max speed of 1Gbps for this mode.

The second patch uses a dedicated helper to decode the control word.
This is necessary as although USGMII control words are close to USXGMII,
they don't support the same speeds.

[1] : https://lore.kernel.org/netdev/ZHnd+6FUO77XFJvQ@shell.armlinux.org.uk/
====================

Link: https://lore.kernel.org/r/20230609080305.546028-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12 16:51:22 -07:00
Maxime Chevallier
923454c036 net: phylink: use a dedicated helper to parse usgmii control word
Q-USGMII is a derivative of USGMII, that uses a specific formatting for
the control word. The layout is close to the USXGMII control word, but
doesn't support speeds over 1Gbps. Use a dedicated decoding logic for
the USGMII control word, re-using USXGMII definitions but only considering
10/100/1000Mbps speeds

Fixes: 5e61fe157a ("net: phy: Introduce QUSGMII PHY mode")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12 16:51:20 -07:00
Maxime Chevallier
b9dc1046ed net: phylink: report correct max speed for QUSGMII
Q-USGMII is the quad port version of USGMII, and supports a max speed of
1Gbps on each line. Make so that phylink_interface_max_speed() reports
this information correctly.

Fixes: ae0e4bb2a0 ("net: phylink: Adjust link settings based on rate matching")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12 16:51:20 -07:00
Gary Guo
d2e3115d71 rust: error: impl Debug for Error with errname() integration
Integrate the `Error` type with `errname()` by providing a new
`name()` method.

Then, implement `Debug` for the type using the new method.

[ Miguel: under `CONFIG_SYMBOLIC_ERRNAME=n`, `errname()` is a
  `static inline`, so added a helper to support that case,
  like we had in the `rust` branch. Also moved `#include` up
  and reworded commit message for clarity. ]

Co-developed-by: Wedson Almeida Filho <walmeida@microsoft.com>
Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com>
Co-developed-by: Sven Van Asbroeck <thesven73@gmail.com>
Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com>
Signed-off-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230531174450.3733220-1-aliceryhl@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2023-06-13 01:24:42 +02:00
Qu Wenruo
745806fb45 btrfs: do not ASSERT() on duplicated global roots
[BUG]
Syzbot reports a reproducible ASSERT() when using rescue=usebackuproot
mount option on a corrupted fs.

The full report can be found here:
https://syzkaller.appspot.com/bug?extid=c4614eae20a166c25bf0

  BTRFS error (device loop0: state C): failed to load root csum
  assertion failed: !tmp, in fs/btrfs/disk-io.c:1103
  ------------[ cut here ]------------
  kernel BUG at fs/btrfs/ctree.h:3664!
  invalid opcode: 0000 [#1] PREEMPT SMP KASAN
  CPU: 1 PID: 3608 Comm: syz-executor356 Not tainted 6.0.0-rc7-syzkaller-00029-g3800a713b607 #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022
  RIP: 0010:assertfail+0x1a/0x1c fs/btrfs/ctree.h:3663
  RSP: 0018:ffffc90003aaf250 EFLAGS: 00010246
  RAX: 0000000000000032 RBX: 0000000000000000 RCX: f21c13f886638400
  RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000
  RBP: ffff888021c640a0 R08: ffffffff816bd38d R09: ffffed10173667f1
  R10: ffffed10173667f1 R11: 1ffff110173667f0 R12: dffffc0000000000
  R13: ffff8880229c21f7 R14: ffff888021c64060 R15: ffff8880226c0000
  FS:  0000555556a73300(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 000055a2637d7a00 CR3: 00000000709c4000 CR4: 00000000003506e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   <TASK>
   btrfs_global_root_insert+0x1a7/0x1b0 fs/btrfs/disk-io.c:1103
   load_global_roots_objectid+0x482/0x8c0 fs/btrfs/disk-io.c:2467
   load_global_roots fs/btrfs/disk-io.c:2501 [inline]
   btrfs_read_roots fs/btrfs/disk-io.c:2528 [inline]
   init_tree_roots+0xccb/0x203c fs/btrfs/disk-io.c:2939
   open_ctree+0x1e53/0x33df fs/btrfs/disk-io.c:3574
   btrfs_fill_super+0x1c6/0x2d0 fs/btrfs/super.c:1456
   btrfs_mount_root+0x885/0x9a0 fs/btrfs/super.c:1824
   legacy_get_tree+0xea/0x180 fs/fs_context.c:610
   vfs_get_tree+0x88/0x270 fs/super.c:1530
   fc_mount fs/namespace.c:1043 [inline]
   vfs_kern_mount+0xc9/0x160 fs/namespace.c:1073
   btrfs_mount+0x3d3/0xbb0 fs/btrfs/super.c:1884

[CAUSE]
Since the introduction of global roots, we handle
csum/extent/free-space-tree roots as global roots, even if no
extent-tree-v2 feature is enabled.

So for regular csum/extent/fst roots, we load them into
fs_info::global_root_tree rb tree.

And we should not expect any conflicts in that rb tree, thus we have an
ASSERT() inside btrfs_global_root_insert().

But rescue=usebackuproot can break the assumption, as we will try to
load those trees again and again as long as we have bad roots and have
backup roots slot remaining.

So in that case we can have conflicting roots in the rb tree, and
triggering the ASSERT() crash.

[FIX]
We can safely remove that ASSERT(), as the caller will properly put the
offending root.

To make further debugging easier, also add two explicit error messages:

- Error message for conflicting global roots
- Error message when using backup roots slot

Reported-by: syzbot+a694851c6ab28cbcfb9c@syzkaller.appspotmail.com
Fixes: abed4aaae4 ("btrfs: track the csum, extent, and free space trees in a rb tree")
CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2023-06-13 01:21:16 +02:00
Marc Zyngier
ad744e8cb3 arm64: Allow arm64_sw.hvhe on command line
Add the arm64_sw.hvhe=1 option to force the use of the hVHE mode
in the hypervisor code only.

This enables the hVHE mode of operation when using KVM on VHE
hardware.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20230609162200.2024064-17-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-06-12 23:17:24 +00:00
Marc Zyngier
38cba55008 KVM: arm64: Force HCR_E2H in guest context when ARM64_KVM_HVHE is set
Also make sure HCR_EL2.E2H is set when switching HCR_EL2 in guest
context.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230609162200.2024064-16-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-06-12 23:17:24 +00:00
Marc Zyngier
aca18585db KVM: arm64: Program the timer traps with VHE layout in hVHE mode
Just like the rest of the timer code, we need to shift the enable
bits around when HCR_EL2.E2H is set, which is the case in hVHE mode.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230609162200.2024064-15-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-06-12 23:17:24 +00:00
Marc Zyngier
75c76ab5a6 KVM: arm64: Rework CPTR_EL2 programming for HVHE configuration
Just like we repainted the early arm64 code, we need to update
the CPTR_EL2 accesses that are taking place in the nVHE code
when hVHE is used, making them look as if they were CPACR_EL1
accesses. Just like the VHE code.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230609162200.2024064-14-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-06-12 23:17:24 +00:00
Marc Zyngier
6537565fd9 KVM: arm64: Adjust EL2 stage-1 leaf AP bits when ARM64_KVM_HVHE is set
El2 stage-1 page-table format is subtly (and annoyingly) different
when HCR_EL2.E2H is set.

Take the ARM64_KVM_HVHE configuration into account when setting
the AP bits.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230609162200.2024064-13-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-06-12 23:17:23 +00:00
Marc Zyngier
cff3b5cf96 KVM: arm64: Disable TTBR1_EL2 when using ARM64_KVM_HVHE
When using hVHE, we end-up with two TTBRs at EL2. That's great,
but we're not quite ready for this just yet.

Disable TTBR1_EL2 by setting TCR_EL2.EPD1 so that we only
translate via TTBR0_EL2.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230609162200.2024064-12-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-06-12 23:17:23 +00:00
Marc Zyngier
d0daf5a21e KVM: arm64: Force HCR_EL2.E2H when ARM64_KVM_HVHE is set
Obviously, in order to be able to use VHE whilst at EL2, we need
to set HCR_EL2.E2H. Do so when ARM64_KVM_HVHE is set.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230609162200.2024064-11-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-06-12 23:17:23 +00:00
Marc Zyngier
6f617d3aa6 KVM: arm64: Key use of VHE instructions in nVHE code off ARM64_KVM_HVHE
We can now start with the fun stuff: if we enable VHE *only* for
the hypervisor, we need to generate the VHE instructions when
accessing the system registers.

For this, reporpose the alternative sequence to be keyed off
ARM64_KVM_HVHE in the nVHE hypervisor code, and only there.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230609162200.2024064-10-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-06-12 23:17:23 +00:00
Marc Zyngier
57e784b407 KVM: arm64: Remove alternatives from sysreg accessors in VHE hypervisor context
In the VHE hypervisor code, we should be using the remapped VHE
accessors, no ifs, no buts. No need to generate any alternative.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230609162200.2024064-9-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-06-12 23:17:23 +00:00
Marc Zyngier
659803aef4 arm64: Use CPACR_EL1 format to set CPTR_EL2 when E2H is set
When HCR_EL2.E2H is set, the CPTR_EL2 register takes the CPACR_EL1
format. Yes, this is good fun.

Hack the bits of startup code that assume E2H=0 while setting up
CPTR_EL2 to make them grok the CPTR_EL1 format.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20230609162200.2024064-8-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-06-12 23:17:23 +00:00
Marc Zyngier
9e7462bbe0 arm64: Allow EL1 physical timer access when running VHE
To initialise the timer access from EL2 when HCR_EL2.E2H is set,
we must make use the CNTHCTL_EL2 formap used is appropriate.

This amounts to shifting the timer/counter enable bits by 10
to the left.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20230609162200.2024064-7-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-06-12 23:17:23 +00:00
Marc Zyngier
7a26e1f51e arm64: Don't enable VHE for the kernel if OVERRIDE_HVHE is set
If the OVERRIDE_HVHE SW override is set (as a precursor of
the KVM_HVHE capability), do not enable VHE for the kernel
and drop to EL1 as if VHE was either disabled or unavailable.

Further changes will enable VHE at EL2 only, with the kernel
still running at EL1.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20230609162200.2024064-6-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-06-12 23:17:23 +00:00
Marc Zyngier
e2d6c906f0 arm64: Add KVM_HVHE capability and has_hvhe() predicate
Expose a capability keying the hVHE feature as well as a new
predicate testing it. Nothing is so far using it, and nothing
is enabling it yet.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20230609162200.2024064-5-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-06-12 23:17:23 +00:00
Marc Zyngier
0ddc312b7c arm64: Turn kaslr_feature_override into a generic SW feature override
Disabling KASLR from the command line is implemented as a feature
override. Repaint it slightly so that it can further be used as
more generic infrastructure for SW override purposes.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20230609162200.2024064-4-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-06-12 23:17:23 +00:00
Marc Zyngier
35230be87e arm64: Prevent the use of is_kernel_in_hyp_mode() in hypervisor code
Using is_kernel_in_hyp_mode() in hypervisor code is a pretty bad
mistake. This helper only checks for CurrentEL being EL2, which
is always true.

Make the compilation fail if using the helper in hypervisor context
Whilst we're at it, flag the helper as __always_inline, which it
really should be.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20230609162200.2024064-3-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-06-12 23:17:23 +00:00
Marc Zyngier
c4b9fd2ac0 KVM: arm64: Drop is_kernel_in_hyp_mode() from __invalidate_icache_guest_page()
It is pretty obvious that is_kernel_in_hyp_mode() doesn't make much
sense in the hypervisor part of KVM, and should be reserved to the
kernel side.

However, mem_protect.c::invalidate_icache_guest_page() calls into
__invalidate_icache_guest_page(), which uses is_kernel_in_hyp_mode().
Given that this is part of the pKVM side of the hypervisor, this
helper can only return true.

Nothing goes really bad, but __invalidate_icache_guest_page() could
spell out what the actual check is: we cannot invalidate the cache
if the i-cache is VPIPT and we're running at EL1.

Drop the is_kernel_in_hyp_mode() check for an explicit check against
CurrentEL being EL1 or not.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230609162200.2024064-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-06-12 23:17:23 +00:00
Linus Torvalds
fb054096ae 19 hotfixes. 14 are cc:stable and the remainder address issues which were
introduced during this -rc cycle or which were considered inappropriate
 for a backport.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZIdw7QAKCRDdBJ7gKXxA
 jki4AQCygi1UoqVPq4N/NzJbv2GaNDXNmcJIoLvPpp3MYFhucAEAtQNzAYO9z6CT
 iLDMosnuh+1KLTaKNGL5iak3NAxnxQw=
 =mTdI
 -----END PGP SIGNATURE-----

Merge tag 'mm-hotfixes-stable-2023-06-12-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "19 hotfixes. 14 are cc:stable and the remainder address issues which
  were introduced during this development cycle or which were considered
  inappropriate for a backport"

* tag 'mm-hotfixes-stable-2023-06-12-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  zswap: do not shrink if cgroup may not zswap
  page cache: fix page_cache_next/prev_miss off by one
  ocfs2: check new file size on fallocate call
  mailmap: add entry for John Keeping
  mm/damon/core: fix divide error in damon_nr_accesses_to_accesses_bp()
  epoll: ep_autoremove_wake_function should use list_del_init_careful
  mm/gup_test: fix ioctl fail for compat task
  nilfs2: reject devices with insufficient block count
  ocfs2: fix use-after-free when unmounting read-only filesystem
  lib/test_vmalloc.c: avoid garbage in page array
  nilfs2: fix possible out-of-bounds segment allocation in resize ioctl
  riscv/purgatory: remove PGO flags
  powerpc/purgatory: remove PGO flags
  x86/purgatory: remove PGO flags
  kexec: support purgatories with .text.hot sections
  mm/uffd: allow vma to merge as much as possible
  mm/uffd: fix vma operation where start addr cuts part of vma
  radix-tree: move declarations to header
  nilfs2: fix incomplete buffer cleanup in nilfs_btnode_abort_change_key()
2023-06-12 16:14:34 -07:00
Srinivas Pandruvada
7244720ac1 tools/power/x86/intel-speed-select: v1.16 release
This version addresses issues with core power configuration for
non CPU dies. Also address issue with JSON formatting of output.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2023-06-12 16:11:04 -07:00
Jing Zhang
d86cde6e33 KVM: arm64: Reuse fields of sys_reg_desc for idreg
sys_reg_desc::{reset, val} are presently unused for ID register
descriptors. Repurpose these fields to support user-configurable ID
registers.
Use the ::reset() function pointer to return the sanitised value of a
given ID register, optionally with KVM-specific feature sanitisation.
Additionally, keep a mask of writable register fields in ::val.

Signed-off-by: Jing Zhang <jingzhangos@google.com>
Link: https://lore.kernel.org/r/20230609190054.1542113-6-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-06-12 23:08:33 +00:00
Oliver Upton
f90f9360c3 KVM: arm64: Rewrite IMPDEF PMU version as NI
KVM allows userspace to write an IMPDEF PMU version to the corresponding
32bit and 64bit ID register fields for the sake of backwards
compatibility with kernels that lacked commit 3d0dba5764 ("KVM: arm64:
PMU: Move the ID_AA64DFR0_EL1.PMUver limit to VM creation"). Plumbing
that IMPDEF PMU version through to the gues is getting in the way of
progress, and really doesn't any sense in the first place.

Bite the bullet and reinterpret the IMPDEF PMU version as NI (0) for
userspace writes. Additionally, spill the dirty details into a comment.

Link: https://lore.kernel.org/r/20230609190054.1542113-5-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-06-12 23:08:33 +00:00
Oliver Upton
2251e9ff15 KVM: arm64: Make vCPU feature flags consistent VM-wide
To date KVM has allowed userspace to construct asymmetric VMs where
particular features may only be supported on a subset of vCPUs. This
wasn't really the intened usage pattern, and it is a total pain in the
ass to keep working in the kernel. What's more, this is at odds with CPU
features in host userspace, where asymmetric features are largely hidden
or disabled.

It's time to put an end to the whole game. Require all vCPUs in the VM
to have the same feature set, rejecting deviants in the
KVM_ARM_VCPU_INIT ioctl. Preserve some of the vestiges of per-vCPU
feature flags in case we need to reinstate the old behavior for some
limited configurations. Yes, this is a sign of cowardice around a
user-visibile change.

Hoist all of the 32-bit limitations into kvm_vcpu_init_check_features()
to avoid nested attempts to acquire the config_lock, which won't end
well.

Link: https://lore.kernel.org/r/20230609190054.1542113-4-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-06-12 23:08:33 +00:00
Oliver Upton
e3c1c0cae3 KVM: arm64: Relax invariance of KVM_ARM_VCPU_POWER_OFF
Allow the value of KVM_ARM_VCPU_POWER_OFF to differ between calls to
KVM_ARM_VCPU_INIT. Userspace can already change the state of the vCPU
through the KVM_SET_MP_STATE ioctl, so making the bit invariant seems
needlessly restrictive.

Link: https://lore.kernel.org/r/20230609190054.1542113-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-06-12 23:08:33 +00:00
Oliver Upton
a7a2c72ae0 KVM: arm64: Separate out feature sanitisation and initialisation
kvm_vcpu_set_target() iteratively sanitises and copies feature flags in
one go. This is rather odd, especially considering the fact that bitmap
accessors can do the heavy lifting. A subsequent change will make vCPU
features VM-wide, and fitting that into the present implementation is
just a chore.

Rework the whole thing to use bitmap accessors to sanitise and copy
flags.

Link: https://lore.kernel.org/r/20230609190054.1542113-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-06-12 23:08:33 +00:00
Srinivas Pandruvada
fcf127839e tools/power/x86/intel-speed-select: Fix json formatting issue
Fix two issues related to JSON formatting:
1.
intel-speed-select -f json -o cp.out -c 1 core-power assoc -c 1
Intel(R) Speed Select Technology
Executing on CPU model:143[0x8f]
[root@spr-bkc bin]# cat cp.out | jq .
"package-0:die-0:cpu-1"

2.
intel-speed-select -f json -o tf.out turbo-freq enable -a
Intel(R) Speed Select Technology
Executing on CPU model:143[0x8f]
[root@spr-bkc bin]# cat tf.out | jq .
{
  "package-0:die-0:cpu-0": {
    "turbo-freq": {
      "enable": "success"
    }
  },
  "package-1:die-0:cpu-48": {
    "turbo-freq": {
      "enable": "success"
    }
  }
}
"turbo-freq --auto"
parse error: Expected string key before ':' at line 17, column 24

Both of these issues needed proper closing "}" for JSON.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2023-06-12 16:04:02 -07:00
Srinivas Pandruvada
4ebde55b7d tools/power/x86/intel-speed-select: Adjust scope of core-power config
When core-power configuration or enabled is modified, this is only done
for compute dies. But the config must also be set to cores with no CPUs.
Without this the configuration is not affective.

On displaying config information, allow display for non compute dies
also.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2023-06-12 16:03:25 -07:00