DSP_SW_INTR_STAT_OFFSET is a common interrupt register which will be
accessed by both ACP firmware and driver. This register contains register
bits corresponds to host to dsp interrupts and vice versa.
when dsp to host interrupt is reported, only clear dsp to host
interrupt bit in DSP_SW_INTR_STAT_OFFSET.
Fixes: 2e7c6652f9 ("ASoC: SOF: amd: Fix for handling spurious interrupts from DSP")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230823073340.2829821-7-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Due to scratch memory persistence, Once the DSP panic is reported, need to
clear the panic mask after handling DSP panic. Otherwise, It results in DSP
panic on next reboot.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230823073340.2829821-6-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Few AMD platforms require ACP ACLK as clock source.
Add conditional check for clock mux selection register for
switching between internal clock and ACP ACLK.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230823073340.2829821-5-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add module parameter for firmware debug. If firmware debug
flag is enabled, clear the fusion stall bit which is required
for enabling firmware debugging through JTAG.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230823073340.2829821-3-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Previously ACP SOF firmware used to enable the ACP external
global interrupt register.
This will restrict to report ACP host interrupts only after
firmware loading is successful.
This register needs to be set from host driver to handle
other ACP interrupts(SoundWire Interrupts) before loading
the ACP firmware.
Add field for external interrupt enable register in acp descriptor
structure and enable the external interrupt enable register.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230823073340.2829821-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During initial development time for RN platform, when SHA
dma gets completed, SHA DMA engine used to raise the ACP interrupt.
In ACP interrupt handler, SHA DMA interrupt got handled.
Currently SHA DMA compleition is verified by checking
transfer count using read poll time out logic.
Remove unused SHA dma interrupt handling code.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230823073340.2829821-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current analog gain TLV seems to have completely incorrect values in
it. The gain starts at 0.5dB, proceeds in 1dB steps, and has no mute
value, correct the control to match.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230823085308.753572-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pass the pmu so the format list can be better abstracted and later
lazily loaded.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230823080828.1460376-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Abstract the format list better, hiding it in the PMU, by changing
perf_pmu__config_terms() the PMU rather than the format list in the PMU.
Change the PMU test to pass a dummy PMU for this purpose. Changing the
test allows perf_pmu__del_formats() to become static.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230823080828.1460376-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move declaration from header file to pmu.y and make static.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230823080828.1460376-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Avoid having the function in the C and header file, as it is only used
locally by pmu.y.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230823080828.1460376-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rather than read a base path and append into a 2nd path, read the base
path directly into output buffer and append to that.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230823080828.1460376-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Done to reduce dependencies on pmu-events.h.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230823080828.1460376-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Based on commit 7d54a4acd8 ("perf test: Skip watchpoint tests if
no watchpoints available"), hardware breakpoints are not available for
power9 platform and because of that 'perf bench breakpoint' run fails on
power9 platform.
Add code to check for the return value of perf_event_open() in the
breakpoint run and skip the 'perf bench breakpoint' run, if hardware
breakpoints are not available.
Result on power9 system before patch changes:
[command]# perf bench breakpoint thread
perf_event_open: No such device
Result on power9 system after patch changes:
[command]# ./perf bench breakpoint thread
Skipping perf bench breakpoint thread: No hardware support
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Naveen N Rao <naveen@kernel.org>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230823075103.190565-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 8399918f30 ("staging: wilc1000: use RCU list to maintain vif interfaces list")
removed wilc_get_interface() but not its declaration.
Commit 9bc061e880 ("staging: wilc1000: added support to dynamically add/remove interfaces")
declared but never implemented wilc_cfg_alloc() and wilc_netdev_interface().
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230819102100.13720-1-yuehaibing@huawei.com
In 'mwifiex_handle_uap_rx_forward()', always check the value
returned by 'skb_copy()' to avoid potential NULL pointer
dereference in 'mwifiex_uap_queue_bridged_pkt()', and drop
original skb in case of copying failure.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 838e4f4492 ("mwifiex: improve uAP RX handling")
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230814095041.16416-1-dmantipov@yandex.ru
In the vendor driver, the current channel power is queried from
EEPROM_TXPOWER_BG1 and EEPROM_TXPOWER_BG2. And then the mixed value
will be written into the low half-word of the TX_ALC_CFG_0 register.
The high half-word of the TX_ALC_CFG_0 is a fixed value 0x2f2f.
We can't get the accurate TX power. Based on my tests and the new
MediaTek mt76 driver source code, the real TX power is approximately
equal to channel_power + (max) rate_power. Usually max rate_power is
the gain of the OFDM 6M rate, which can be readed from the offset
EEPROM_TXPOWER_BYRATE +1.
Based on these eeprom values, this patch adds basic TX power control
for the MT7620 and limits its maximum TX power. This can avoid the
link speed decrease caused by chip overheating. rt2800_config_alc()
function has also been renamed to rt2800_config_alc_rt6352() because
it's only used by RT6352 (MT7620).
Notice:
It's still need some work to sync the max channel power to the user
interface. This part is missing from the rt2x00 driver framework. If
we set the power exceed the calibration value, it won't take effect.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/TYAP286MB03159090ED14044215E59FD6BC10A@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM
Use the helper function devm_kmemdup() rather than duplicating its
implementation, which helps to enhance code readability.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230810114939.2104013-1-lizetao1@huawei.com
* Allow the kernel to initiate a freeze of a filesystem. The kernel
and userspace can both hold a freeze on a filesystem at the same
time; the freeze is not lifted until /both/ holders lift it. This
will enable us to fix a longstanding bug in XFS online fsck.
* Use kernel-initated fsfreeze to fix some longstanding false negatives
in onlin fsck of the free space and inode counters.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZM0XzQAKCRBKO3ySh0YR
phSCAQD9hQmd9tngbNGos44XthgHDIfVHLQLWLt6lwcD0WNfIgEAwMWKLzI9hi7G
SmX3NWDQBj7kvC96HYizIvdSsdkvHw0=
=ulEr
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZOXpMgAKCRCRxhvAZXjc
ovFBAP97HEUSf78XXTQehluJgkbSVu208DFC4mCyFA6rRihskQD/Yz0uosr/51zJ
FdUPNg8MNkQCRtqx5LQ7yClNSr9Sxg4=
=uIAe
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.6-merge-3' of ssh://gitolite.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs online fsck update from Darrick Wong:
New code for 6.6:
* Allow the kernel to initiate a freeze of a filesystem. The kernel
and userspace can both hold a freeze on a filesystem at the same
time; the freeze is not lifted until /both/ holders lift it. This
will enable us to fix a longstanding bug in XFS online fsck.
* Use kernel-initated fsfreeze to fix some longstanding false negatives
in online fsck of the free space and inode counters.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Message-Id: <20230822182604.GB11286@frogsfrogsfrogs>
Signed-off-by: Christian Brauner <brauner@kernel.org>
* Allow the kernel to initiate a freeze of a filesystem. The kernel
and userspace can both hold a freeze on a filesystem at the same
time; the freeze is not lifted until /both/ holders lift it. This
will enable us to fix a longstanding bug in XFS online fsck.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZLVnJwAKCRBKO3ySh0YR
pqVIAP9u9CZEJ2Zcc7YpBj1MLUQGr2xBmz8RJEVJbQHKVgYcQwEA9BNb4eH4i2Af
K7Qp0OGNgyzZw37lN23Uf/SDuBK2QgM=
=seMl
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZOXo2AAKCRCRxhvAZXjc
ojDfAQDguc2saF8WLeXtn2O0pGOW8vTrhpwiFHNI6hwdzf07/AD+LGBpFEqYKyX5
NHPzdR7YYpJoTsQzR4JFJVZqN9Q1xgU=
=wDq0
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.6-merge-2' of ssh://gitolite.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull filesystem freezing updates from Darrick Wong:
New code for 6.6:
* Allow the kernel to initiate a freeze of a filesystem. The kernel
and userspace can both hold a freeze on a filesystem at the same
time; the freeze is not lifted until /both/ holders lift it. This
will enable us to fix a longstanding bug in XFS online fsck.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Message-Id: <20230822182604.GB11286@frogsfrogsfrogs>
Signed-off-by: Christian Brauner <brauner@kernel.org>
When building for power4, newer binutils don't recognise the "dcbfl"
extended mnemonic.
dcbfl RA, RB is equivalent to dcbf RA, RB, 1.
Switch to "dcbf" to avoid the build error.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add check for pf->vf not being NULL before dereferencing
pf->vf[vsi->vf_id] in updating VSI filter sync.
Add a similar check before dereferencing !pf->vf[vsi->vf_id].trusted
in the condition for clearing promisc mode bit.
Fixes: c87c938f62 ("i40e: Add VF VLAN pruning")
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All callers of build_skb() (*) in bnxt are in NAPI context.
The budget checking is somewhat convoluted because in the shared
completion queue cases Rx packets are discarded by netpoll
by forcing an error (E). But that happens before skb allocation.
Only a call chain starting at __bnxt_poll_work() can lead to
an skb allocation and it checks budget (b).
* bnxt_rx_multi_page_skb
* bnxt_rx_skb
` bp->rx_skb_func
* bnxt_tpa_end
` bnxt_rx_pkt
E bnxt_force_rx_discard
E bnxt_poll_nitroa0
b __bnxt_poll_work
Use napi_build_skb() to take advantage of the skb cache.
In iperf tests with HW-GRO enabled it barely makes a difference
but in cases where HW-GRO is not as effective (or disabled) it
can give even a >10% boost (20.7Gbps -> 23.1Gbps).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The try_src_count and try_snk_count may still be 1 after enter into
unattached state. This may be caused by below case:
- SNK_TRY->SNK_TRY_WAIT->SRC_TRYWAIT->SNK_UNATTACHED
- SRC_TRY->SRC_TRY_WAIT->SNK_TRYWAIT->SNK_UNATTACHED
The port->attached is not true at the end and tcpm_reset_port() will not
be called. This will reset counter into for these cases, otherwise the tcpm
won't try role when new cable attached.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230820151518.1403006-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When sending Discover Identity messages to a Port Partner that uses Power
Delivery v2 and SVDM v1, we currently send PD v2 messages with SVDM v2.0,
expecting the port partner to respond with its highest supported SVDM
version as stated in Section 6.4.4.2.3 in the Power Delivery v3
specification. However, sending SVDM v2 to some Power Delivery v2 port
partners results in a NAK whereas sending SVDM v1 does not.
NAK messages can be handled by the initiator (PD v3 section 6.4.4.2.5.1),
and one solution could be to resend Discover Identity on a lower SVDM
version if possible. But, Section 6.4.4.3 of PD v2 states that "A NAK
response Should be taken as an indication not to retry that particular
Command."
Instead, we can set the SVDM version to the maximum one supported by the
negotiated PD revision. When operating in PD v2, this obeys Section
6.4.4.2.3, which states the SVDM field "Shall be set to zero to indicate
Version 1.0." In PD v3, the SVDM field "Shall be set to 01b to indicate
Version 2.0."
Fixes: c34e85fa69 ("usb: typec: tcpm: Send DISCOVER_IDENTITY from dedicated work")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230731165926.1815338-1-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When replacing an existing root qdisc, with one that is of the same kind, the
request boils down to essentially a parameterization change i.e not one that
requires allocation and grafting of a new qdisc. syzbot was able to create a
scenario which resulted in a taprio qdisc replacing an existing taprio qdisc
with a combination of NLM_F_CREATE, NLM_F_REPLACE and NLM_F_EXCL leading to
create and graft scenario.
The fix ensures that only when the qdisc kinds are different that we should
allow a create and graft, otherwise it goes into the "change" codepath.
While at it, fix the code and comments to improve readability.
While syzbot was able to create the issue, it did not zone on the root cause.
Analysis from Vladimir Oltean <vladimir.oltean@nxp.com> helped narrow it down.
v1->V2 changes:
- remove "inline" function definition (Vladmir)
- remove extrenous braces in branches (Vladmir)
- change inline function names (Pedro)
- Run tdc tests (Victor)
v2->v3 changes:
- dont break else/if (Simon)
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: syzbot+a3618a167af2021433cd@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/20230816225759.g25x76kmgzya2gei@skbuf/T/
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove debug logs in port vlan management, since there are already multiple
tracepoints defined for those operations in DSA
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
BPF programs that run on connect can rewrite the connect address. For
the connect system call this isn't a problem, because a copy of the address
is made when it is moved into kernel space. However, kernel_connect
simply passes through the address it is given, so the caller may observe
its address value unexpectedly change.
A practical example where this is problematic is where NFS is combined
with a system such as Cilium which implements BPF-based load balancing.
A common pattern in software-defined storage systems is to have an NFS
mount that connects to a persistent virtual IP which in turn maps to an
ephemeral server IP. This is usually done to achieve high availability:
if your server goes down you can quickly spin up a replacement and remap
the virtual IP to that endpoint. With BPF-based load balancing, mounts
will forget the virtual IP address when the address rewrite occurs
because a pointer to the only copy of that address is passed down the
stack. Server failover then breaks, because clients have forgotten the
virtual IP address. Reconnects fail and mounts remain broken. This patch
was tested by setting up a scenario like this and ensuring that NFS
reconnects worked after applying the patch.
Signed-off-by: Jordan Rife <jrife@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The virtio_net driver currently deals with different versions and types
of virtio net headers, such as virtio_net_hdr_mrg_rxbuf,
virtio_net_hdr_v1_hash, etc. Due to these variations, the code relies
on multiple type casts to convert memory between different structures,
potentially leading to bugs when there are changes in these structures.
Introduces the "struct skb_vnet_common_hdr" as a unifying header
structure using a union. With this approach, various virtio net header
structures can be converted by accessing different members of this
structure, thus eliminating the need for type casting and reducing the
risk of potential bugs.
For example following code:
static struct sk_buff *page_to_skb(struct virtnet_info *vi,
struct receive_queue *rq,
struct page *page, unsigned int offset,
unsigned int len, unsigned int truesize,
unsigned int headroom)
{
[...]
struct virtio_net_hdr_mrg_rxbuf *hdr;
[...]
hdr_len = vi->hdr_len;
[...]
ok:
hdr = skb_vnet_hdr(skb);
memcpy(hdr, hdr_p, hdr_len);
[...]
}
When VIRTIO_NET_F_HASH_REPORT feature is enabled, hdr_len = 20
But the sizeof(*hdr) is 12,
memcpy(hdr, hdr_p, hdr_len); will copy 20 bytes to the hdr,
which make a potential risk of bug. And this risk can be avoided by
introducing struct skb_vnet_common_hdr.
Change log
v1->v2
feedback from Willem de Bruijn <willemdebruijn.kernel@gmail.com>
feedback from Simon Horman <horms@kernel.org>
1. change to use net-next tree.
2. move skb_vnet_common_hdr inside kernel file instead of the UAPI header.
v2->v3
feedback from Willem de Bruijn <willemdebruijn.kernel@gmail.com>
1. fix typo in commit message.
2. add original struct virtio_net_hdr into union
3. remove virtio_net_hdr_mrg_rxbuf variable in receive_buf;
Signed-off-by: Feng Liu <feliu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert list_for_each() to list_for_each_entry() where applicable.
No functional changed.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Back when set_fs() was a generic API for altering the address limit,
addr_limit_user_check() was a safety measure to prevent userspace being
able to issue syscalls with an unbound limit.
With the the removal of set_fs() as a generic API, the last user of
addr_limit_user_check() was removed in commit:
b5a5a01d8e ("arm64: uaccess: remove addr_limit_user_check()")
... as since that commit, no architecture defines TIF_FSCHECK, and hence
addr_limit_user_check() always expands to nothing.
Remove addr_limit_user_check(), updating the comment in
exit_to_user_mode_prepare() to no longer refer to it. At the same time,
the comment is reworded to be a little more generic so as to cover
kmap_assert_nomap() in addition to lockdep_sys_exit().
No functional change.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230821163526.2319443-1-mark.rutland@arm.com
A schema under 'additionalProperties' works better for matching any
property/node other than the ones explicitly listed. Convert the schema
to use that rather than the wildcard and if/then schema.
Drop 'phandle' properties which never need to be explicitly listed while
we're here.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230819010928.916438-1-robh@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
If a signal callback releases the sw_sync fence, that will trigger a
deadlock as the timeline_fence_release recurses onto the fence->lock
(used both for signaling and the the timeline tree).
To avoid that, temporarily hold an extra reference to the signalled
fences until after we drop the lock.
(This is an alternative implementation of https://patchwork.kernel.org/patch/11664717/
which avoids some potential UAF issues with the original patch.)
v2: Remove now obsolete comment, use list_move_tail() and
list_del_init()
Reported-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Fixes: d3c6dd1fb3 ("dma-buf/sw_sync: Synchronize signal vs syncpt free")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230818145939.39697-1-robdclark@gmail.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
variable *nplanes is provided by user via system call argument. The
possible value of q_data->fmt->num_planes is 1-3, while the value
of *nplanes can be 1-8. The array access by index i can cause array
out-of-bounds.
Fix this bug by checking *nplanes against the array size.
Fixes: 4e855a6efa ("[media] vcodec: mediatek: Add Mediatek V4L2 Video Encoder Driver")
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Making virt_to_pfn() a static inline taking a strongly typed
(const void *) makes the contract of a passing a pointer of that
type to the function explicit and exposes any misuse of the
macro virt_to_pfn() acting polymorphic and accepting many types
such as (void *), (unitptr_t) or (unsigned long) as arguments
without warnings.
Move the function down in the file so __pa() exists in our
scope, and it compiles. This in turn requires moving __pa()
as it depends on __virt_to_phys() that was below. (Lazy macro
evaluation conflicts with strict function ordering.)
Make a symmetric change to pfn_to_virt() so we have type
checking both ways.
Due to this the <asm/page.h> file being included into some
assembly files, some further inclusion guards are needed
to make sure assembly keeps compiling.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230808-virt-to-phys-microblaze-v1-1-e6df710fe0a1@linaro.org
Signed-off-by: Michal Simek <michal.simek@amd.com>
