Commit graph

1,215,304 commits

Author SHA1 Message Date
Prathamesh Shete
6d8257ca39 pinctrl: tegra: Add Tegra234 pinmux driver
This change adds support for the two pin controllers found on Tegra234.

Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230605154230.2910847-3-thierry.reding@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-06-09 09:14:44 +02:00
Prathamesh Shete
857982138b dt-bindings: pinctrl: Document Tegra234 pin controllers
Tegra234 contains two pin controllers. Document their compatible strings
and describe the list of pins and functions that they provide.

Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230605154230.2910847-2-thierry.reding@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-06-09 09:14:44 +02:00
Krzysztof Kozlowski
a46f809bf3 pinctrl: qcom: organize audio drivers in menuconfig
The audio pin controller drivers depend on PINCTRL_LPASS_LPI, but since
PINCTRL_LPASS_LPI is not the first entry, they are not displayed in
menuconfig as dependent of PINCTRL_LPASS_LPI.  Re-order the entries to
fix this.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230601152026.1182648-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-06-09 09:11:32 +02:00
Krzysztof Kozlowski
3476b8b192 pinctrl: qcom: organize main SoC drivers in new Kconfig.msm
In menuconfig, some entries depending on PINCTRL_MSM are indented and
expressed as dependening but some not, because of other Kconfig entries
in between,

Move all main Qualcomm SoC pin controller driver entries into new
Kconfig.msm file so they will be nicely ordered in Kconfig file (by
CONFIG_ name) and properly indented as PINCTRL_MSM dependency in
menuconfig.

Functionally this is the same, but since entire file is guarded with "if
PINCTRL_MSM" drop this dependency from individual entries.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230601152026.1182648-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-06-09 09:10:13 +02:00
Krzysztof Kozlowski
405ac045ec pinctrl: qcom: allow true compile testing
Makefile selected Qualcomm pinctrl drivers only for ARCH_QCOM, making
any COMPILE_TEST options inside Kconfig ((ARCH_QCOM || COMPILE_TEST) or
(OF || COMPILE_TEST)) not effective.  Always descent to the qcom
subdirectory to fix this.  All individual drivers are selected in
Makefile via dedicated CONFIG entries, thus this should not have
functional impact except when compile testing.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230601152026.1182648-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-06-09 09:05:36 +02:00
Krzysztof Kozlowski
da95f081b3 pinctrl: qcom: mark true OF dependency - common MSM pinctrl code
The common MSM pinctrl driver code (PINCTRL_MSM) uses
pinconf_generic_dt_node_to_map_group() from GENERIC_PINCONF, which is
not available for compile testing for !OF cases.  Drivers actually do
not depend on OF.  Move the OF dependency to the entry actually
depending on it and drop any "|| COMPILE_TEST", because OF is required
also for compile testing (lack of OF was never visible in compile
testing because none of the drivers could be compile tested due to
Makefile).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230601152026.1182648-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-06-09 09:05:31 +02:00
Krzysztof Kozlowski
c0602eea4a pinctrl: qcom: drop unneeded GPIOLIB dependency
PINCTRL_MSM depends on GPIOLIB, thus individual driver entries depending
on the first do not have to depend on the latter.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230601152026.1182648-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-06-09 09:05:26 +02:00
Krzysztof Kozlowski
be7d0c78aa pinctrl: qcom: correct language typo (Technologies)
Correct typo: Tehcnologies->Technologies.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230601152026.1182648-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-06-09 09:05:21 +02:00
Krzysztof Kozlowski
01bceae214 pinctrl: qcom: fix indentation in Kconfig
Use tab for correct Kconfig indentation.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230601152026.1182648-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-06-09 09:05:15 +02:00
Krzysztof Kozlowski
1c4aac1739 pinctrl: qcom: qdf2xxx: drop ACPI_PTR
Driver can bind only via ACPI matching and acpi_device_id is there
unconditionally, so drop useless ACPI_PTR() macro.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230601152026.1182648-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-06-09 09:05:08 +02:00
Sricharan Ramabadhran
725d1c8916 pinctrl: qcom: Add IPQ5018 pinctrl driver
Add pinctrl definitions for the TLMM of IPQ5018.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Co-developed-by: Nitheesh Sekar <quic_nsekar@quicinc.com>
Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com>
Co-developed-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Link: https://lore.kernel.org/r/20230608122152.3930377-5-quic_srichara@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-06-09 09:00:09 +02:00
Sricharan Ramabadhran
75750edba5 dt-bindings: pinctrl: qcom: Add support for ipq5018
Add device tree binding Documentation details for ipq5018
pinctrl driver.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Co-developed-by: Nitheesh Sekar <quic_nsekar@quicinc.com>
Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com>
Co-developed-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Link: https://lore.kernel.org/r/20230608122152.3930377-4-quic_srichara@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-06-09 08:59:59 +02:00
Nishanth Menon
32a2e6ab2c dt-bindings: pinctrl: Drop k3
For convenience (less code duplication), the pin controller pin
configuration register values were defined in the bindings header.
These are not some IDs or other abstraction layer but raw numbers used
in the registers.

These constants do not fit the purpose of bindings. They do not
provide any abstraction, any hardware and driver independent ID. In
fact, the Linux pinctrl-single driver actually do not use the bindings
header at all.

Commit f2de003e14 ("dt-bindings: pinctrl: k3: Deprecate header with
register constants") already moved users to the local header, so, drop
the binding header. See background discussion in [1].

While at it, clean up the MAINTAINERS file which is the only reference
left.

[1]: https://lore.kernel.org/linux-arm-kernel/71c7feff-4189-f12f-7353-bce41a61119d@linaro.org/

Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230601173831.982429-1-nm@ti.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-06-09 08:56:18 +02:00
AngeloGioacchino Del Regno
9bb0a9e062 leds: leds-mt6323: Add support for WLEDs and MT6332
Add basic code to turn on and off WLEDs and wire up MT6332 support
to take advantage of it.
This is a simple approach due to the aforementioned PMIC supporting
only on/off status so, at the time of writing, it is impossible for me
to validate more advanced functionality due to lack of hardware.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230601110813.2373764-9-angelogioacchino.delregno@collabora.com
2023-06-09 07:44:15 +01:00
AngeloGioacchino Del Regno
9540989ca8 leds: leds-mt6323: Add support for MT6331 leds
Add the register offsets for MT6331. The hwspec is the same as MT6323.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230601110813.2373764-8-angelogioacchino.delregno@collabora.com
2023-06-09 07:43:53 +01:00
Dave Airlie
ba57b9b11f Merge tag 'drm-intel-gt-next-2023-06-08' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:

- I915_GEM_CREATE_EXT_SET_PAT for Mesa on Meteorlake.

Driver Changes:

Fixes/improvements/new stuff:

- Use large rings for compute contexts (Chris Wilson)
- Better logging/debug of unexpected GuC communication issues (Michal Wajdeczko)
- Clear out entire reports after reading if not power of 2 size (Ashutosh Dixit)
- Limit lmem allocation size to succeed on SmallBars (Andrzej Hajda)
- perf/OA capture robustness improvements on DG2 (Umesh Nerlige Ramappa)
- Fix error code in intel_gsc_uc_heci_cmd_submit_nonpriv() (Dan Carpenter)

Future platform enablement:

- Add workaround 14016712196 (Tejas Upadhyay)
- HuC loading for MTL (Daniele Ceraolo Spurio)
- Allow user to set cache at BO creation (Fei Yang)

Miscellaneous:

- Use system include style for drm headers (Jani Nikula)
- Drop legacy CTB definitions (Michal Wajdeczko)
- Turn off the timer to sample frequencies when GT is parked (Ashutosh Dixit)
- Make PMU sample array two-dimensional (Ashutosh Dixit)
- Use the correct error value when kernel_context() fails (Andi Shyti)
- Fix second parameter type of pre-gen8 pte_encode callbacks (Nathan Chancellor)
- Fix parameter in gmch_ggtt_insert_{entries, page}() (Nathan Chancellor)
- Fix size_t format specifier in gsccs_send_message() (Nathan Chancellor)
- Use the fdinfo helper (Tvrtko Ursulin)
- Add some missing error propagation (Tvrtko Ursulin)
- Reduce I915_MAX_GT to 2 (Matt Atwood)
- Rename I915_PMU_MAX_GTS to I915_PMU_MAX_GT (Matt Atwood)
- Remove some obsolete definitions (John Harrison)

Merges:

- Merge drm/drm-next into drm-intel-gt-next (Tvrtko Ursulin)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZIH09fqe5v5yArsu@tursulin-desk
2023-06-09 16:43:36 +10:00
AngeloGioacchino Del Regno
4c58b6d906 leds: leds-mt6323: Open code and drop MT6323_CAL_HW_DUTY macro
There is only one instance of using this macro and it's anyway not
simplifying the flow, or increasing the readability of this driver.

Drop this macro by open coding it in mt6323_led_set_blink().

No functional changes.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230601110813.2373764-7-angelogioacchino.delregno@collabora.com
2023-06-09 07:43:30 +01:00
AngeloGioacchino Del Regno
9bef14141f leds: leds-mt6323: Drop MT6323_ prefix from macros and defines
This renames all definitions and macros to drop the MT6323_ prefix,
since it is now possible to easily add support to more PMICs in
this driver.
While at it, also fix related formatting where possible.

This commit brings no functional changes.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230601110813.2373764-6-angelogioacchino.delregno@collabora.com
2023-06-09 07:43:06 +01:00
AngeloGioacchino Del Regno
3ec0b29e59 leds: leds-mt6323: Specify registers and specs in platform data
In order to enhance the flexibility of this driver and let it support
more than just one MediaTek LEDs IP for more than just one PMIC,
add platform data structure specifying the register offsets and
data that commonly varies between different IPs.

This commit brings no functional changes.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230601110813.2373764-5-angelogioacchino.delregno@collabora.com
2023-06-09 07:42:40 +01:00
AngeloGioacchino Del Regno
0642b7e838 dt-bindings: leds: leds-mt6323: Document mt6332 compatible
Add support for MT6332 LEDs/WLEDs with compatible "mediatek,mt6332-led".

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230601110813.2373764-3-angelogioacchino.delregno@collabora.com
2023-06-09 07:41:01 +01:00
AngeloGioacchino Del Regno
020378ab90 dt-bindings: leds: leds-mt6323: Document mt6331 compatible
Add mediatek,mt6331-led compatible for the LED controller found
in the MT6331 PMIC.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230601110813.2373764-2-angelogioacchino.delregno@collabora.com
2023-06-09 07:40:34 +01:00
Nicholas Piggin
dfaed3e1fa powerpc/64s/radix: Fix exit lazy tlb mm switch with irqs enabled
Switching mm and tinkering with current->active_mm should be done with
irqs disabled. There is a path where exit_lazy_flush_tlb can be called
with irqs enabled:

    exit_lazy_flush_tlb
    flush_type_needed
    __flush_all_mm
    tlb_finish_mmu
    exit_mmap

Which results in the switching being done with irqs enabled, which is
incorrect.

Fixes: a665eec0a2 ("powerpc/64s/radix: Fix mm_cpumask trimming race vs kthread_use_mm")
Cc: stable@vger.kernel.org # v5.10+
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Link: https://lore.kernel.org/linuxppc-dev/A9A5D83D-BA70-47A4-BCB4-30C1AE19BC22@linux.ibm.com/
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230607005601.583293-1-npiggin@gmail.com
2023-06-09 16:35:52 +10:00
Maciej Żenczykowski
1166a530a8 xfrm: fix inbound ipv4/udp/esp packets to UDPv6 dualstack sockets
Before Linux v5.8 an AF_INET6 SOCK_DGRAM (udp/udplite) socket
with SOL_UDP, UDP_ENCAP, UDP_ENCAP_ESPINUDP{,_NON_IKE} enabled
would just unconditionally use xfrm4_udp_encap_rcv(), afterwards
such a socket would use the newly added xfrm6_udp_encap_rcv()
which only handles IPv6 packets.

Cc: Sabrina Dubroca <sd@queasysnail.net>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Benedict Wong <benedictwong@google.com>
Cc: Yan Yan <evitayan@google.com>
Fixes: 0146dca70b ("xfrm: add support for UDPv6 encapsulation of ESP")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2023-06-09 08:16:34 +02:00
Jakub Kicinski
fd5f4d7da2 Merge branch 'splice-net-rewrite-splice-to-socket-fix-splice_f_more-and-handle-msg_splice_pages-in-af_tls'
David Howells says:

====================
splice, net: Rewrite splice-to-socket, fix SPLICE_F_MORE and handle MSG_SPLICE_PAGES in AF_TLS

Here are patches to do the following:

 (1) Block MSG_SENDPAGE_* flags from leaking into ->sendmsg() from
     userspace, whilst allowing splice_to_socket() to pass them in.

 (2) Allow MSG_SPLICE_PAGES to be passed into tls_*_sendmsg().  Until
     support is added, it will be ignored and a splice-driven sendmsg()
     will be treated like a normal sendmsg().  TCP, UDP, AF_UNIX and
     Chelsio-TLS already handle the flag in net-next.

 (3) Replace a chain of functions to splice-to-sendpage with a single
     function to splice via sendmsg() with MSG_SPLICE_PAGES.  This allows a
     bunch of pages to be spliced from a pipe in a single call using a
     bio_vec[] and pushes the main processing loop down into the bowels of
     the protocol driver rather than repeatedly calling in with a page at a
     time.

 (4) Provide a ->splice_eof() op[2] that allows splice to signal to its
     output that the input observed a premature EOF and that the caller
     didn't flag SPLICE_F_MORE, thereby allowing a corked socket to be
     flushed.  This attempts to maintain the current behaviour.  It is also
     not called if we didn't manage to read any data and so didn't called
     the actor function.

     This needs routing though several layers to get it down to the network
     protocol.

     [!] Note that I chose not to pass in any flags - I'm not sure it's
     	 particularly useful to pass in the splice flags; I also elected
     	 not to return any error code - though we might actually want to do
     	 that.

 (5) Provide tls_{device,sw}_splice_eof() to flush a pending TLS record if
     there is one.

 (6) Provide splice_eof() for UDP, TCP, Chelsio-TLS and AF_KCM.  AF_UNIX
     doesn't seem to pay attention to the MSG_MORE or MSG_SENDPAGE_NOTLAST
     flags.

 (7) Alter the behaviour of sendfile() and fix SPLICE_F_MORE/MSG_MORE
     signalling[1] such SPLICE_F_MORE is always signalled until we have
     read sufficient data to finish the request.  If we get a zero-length
     before we've managed to splice sufficient data, we now leave the
     socket expecting more data and leave it to userspace to deal with it.

 (8) Make AF_TLS handle the MSG_SPLICE_PAGES internal sendmsg flag.
     MSG_SPLICE_PAGES is an internal hint that tells the protocol that it
     should splice the pages supplied if it can.  Its sendpage
     implementations are then turned into wrappers around that.

Link: https://lore.kernel.org/r/499791.1685485603@warthog.procyon.org.uk/ [1]
Link: https://lore.kernel.org/r/CAHk-=wh=V579PDYvkpnTobCLGczbgxpMgGmmhqiTyE34Cpi5Gg@mail.gmail.com/ [2]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=51c78a4d532efe9543a4df019ff405f05c6157f6 # part 1
Link: https://lore.kernel.org/r/20230524153311.3625329-1-dhowells@redhat.com/ # v1
====================

Link: https://lore.kernel.org/r/20230607181920.2294972-1-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08 19:40:33 -07:00
David Howells
3dc8976c7a tls/device: Convert tls_device_sendpage() to use MSG_SPLICE_PAGES
Convert tls_device_sendpage() to use sendmsg() with MSG_SPLICE_PAGES rather
than directly splicing in the pages itself.  With that, the tls_iter_offset
union is no longer necessary and can be replaced with an iov_iter pointer
and the zc_page argument to tls_push_data() can also be removed.

This allows ->sendpage() to be replaced by something that can handle
multiple multipage folios in a single transaction.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Boris Pismenny <borisp@nvidia.com>
cc: John Fastabend <john.fastabend@gmail.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08 19:40:31 -07:00
David Howells
24763c9c09 tls/device: Support MSG_SPLICE_PAGES
Make TLS's device sendmsg() support MSG_SPLICE_PAGES.  This causes pages to
be spliced from the source iterator if possible.

This allows ->sendpage() to be replaced by something that can handle
multiple multipage folios in a single transaction.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Boris Pismenny <borisp@nvidia.com>
cc: John Fastabend <john.fastabend@gmail.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08 19:40:31 -07:00
David Howells
45e5be844a tls/sw: Convert tls_sw_sendpage() to use MSG_SPLICE_PAGES
Convert tls_sw_sendpage() and tls_sw_sendpage_locked() to use sendmsg()
with MSG_SPLICE_PAGES rather than directly splicing in the pages itself.

[!] Note that tls_sw_sendpage_locked() appears to have the wrong locking
    upstream.  I think the caller will only hold the socket lock, but it
    should hold tls_ctx->tx_lock too.

This allows ->sendpage() to be replaced by something that can handle
multiple multipage folios in a single transaction.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Boris Pismenny <borisp@nvidia.com>
cc: John Fastabend <john.fastabend@gmail.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08 19:40:31 -07:00
David Howells
fe1e81d4f7 tls/sw: Support MSG_SPLICE_PAGES
Make TLS's sendmsg() support MSG_SPLICE_PAGES.  This causes pages to be
spliced from the source iterator if possible.

This allows ->sendpage() to be replaced by something that can handle
multiple multipage folios in a single transaction.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Boris Pismenny <borisp@nvidia.com>
cc: John Fastabend <john.fastabend@gmail.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08 19:40:31 -07:00
David Howells
219d92056b splice, net: Fix SPLICE_F_MORE signalling in splice_direct_to_actor()
splice_direct_to_actor() doesn't manage SPLICE_F_MORE correctly[1] - and,
as a result, it incorrectly signals/fails to signal MSG_MORE when splicing
to a socket.  The problem I'm seeing happens when a short splice occurs
because we got a short read due to hitting the EOF on a file: as the length
read (read_len) is less than the remaining size to be spliced (len),
SPLICE_F_MORE (and thus MSG_MORE) is set.

The issue is that, for the moment, we have no way to know *why* the short
read occurred and so can't make a good decision on whether we *should* keep
MSG_MORE set.

MSG_SENDPAGE_NOTLAST was added to work around this, but that is also set
incorrectly under some circumstances - for example if a short read fills a
single pipe_buffer, but the next read would return more (seqfile can do
this).

This was observed with the multi_chunk_sendfile tests in the tls kselftest
program.  Some of those tests would hang and time out when the last chunk
of file was less than the sendfile request size:

	build/kselftest/net/tls -r tls.12_aes_gcm.multi_chunk_sendfile

This has been observed before[2] and worked around in AF_TLS[3].

Fix this by making splice_direct_to_actor() always signal SPLICE_F_MORE if
we haven't yet hit the requested operation size.  SPLICE_F_MORE remains
signalled if the user passed it in to splice() but otherwise gets cleared
when we've read sufficient data to fulfill the request.

If, however, we get a premature EOF from ->splice_read(), have sent at
least one byte and SPLICE_F_MORE was not set by the caller, ->splice_eof()
will be invoked.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Linus Torvalds <torvalds@linux-foundation.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Matthew Wilcox <willy@infradead.org>
cc: Jan Kara <jack@suse.cz>
cc: Jeff Layton <jlayton@kernel.org>
cc: David Hildenbrand <david@redhat.com>
cc: Christian Brauner <brauner@kernel.org>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Boris Pismenny <borisp@nvidia.com>
cc: John Fastabend <john.fastabend@gmail.com>
cc: linux-mm@kvack.org

Link: https://lore.kernel.org/r/499791.1685485603@warthog.procyon.org.uk/ [1]
Link: https://lore.kernel.org/r/1591392508-14592-1-git-send-email-pooja.trivedi@stackpath.com/ [2]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=d452d48b9f8b1a7f8152d33ef52cfd7fe1735b0a [3]
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08 19:40:31 -07:00
David Howells
951ace9951 kcm: Use splice_eof() to flush
Allow splice to undo the effects of MSG_MORE after prematurely ending a
splice/sendfile due to getting an EOF condition (->splice_read() returned
0) after splice had called sendmsg() with MSG_MORE set when the user didn't
set MSG_MORE.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/CAHk-=wh=V579PDYvkpnTobCLGczbgxpMgGmmhqiTyE34Cpi5Gg@mail.gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Tom Herbert <tom@herbertland.com>
cc: Tom Herbert <tom@quantonium.net>
cc: Cong Wang <cong.wang@bytedance.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08 19:40:31 -07:00
David Howells
c289a1601a chelsio/chtls: Use splice_eof() to flush
Allow splice to end a Chelsio TLS record after prematurely ending a
splice/sendfile due to getting an EOF condition (->splice_read() returned
0) after splice had called sendmsg() with MSG_MORE set when the user didn't
set MSG_MORE.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/CAHk-=wh=V579PDYvkpnTobCLGczbgxpMgGmmhqiTyE34Cpi5Gg@mail.gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Ayush Sawal <ayush.sawal@chelsio.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08 19:40:31 -07:00
David Howells
1d7e4538a5 ipv4, ipv6: Use splice_eof() to flush
Allow splice to undo the effects of MSG_MORE after prematurely ending a
splice/sendfile due to getting an EOF condition (->splice_read() returned
0) after splice had called sendmsg() with MSG_MORE set when the user didn't
set MSG_MORE.

For UDP, a pending packet will not be emitted if the socket is closed
before it is flushed; with this change, it be flushed by ->splice_eof().

For TCP, it's not clear that MSG_MORE is actually effective.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/CAHk-=wh=V579PDYvkpnTobCLGczbgxpMgGmmhqiTyE34Cpi5Gg@mail.gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Kuniyuki Iwashima <kuniyu@amazon.com>
cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08 19:40:30 -07:00
David Howells
d4c1e80b0d tls/device: Use splice_eof() to flush
Allow splice to end a TLS record after prematurely ending a splice/sendfile
due to getting an EOF condition (->splice_read() returned 0) after splice
had called TLS with a sendmsg() with MSG_MORE set when the user didn't set
MSG_MORE.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/CAHk-=wh=V579PDYvkpnTobCLGczbgxpMgGmmhqiTyE34Cpi5Gg@mail.gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Boris Pismenny <borisp@nvidia.com>
cc: John Fastabend <john.fastabend@gmail.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08 19:40:30 -07:00
David Howells
df720d288d tls/sw: Use splice_eof() to flush
Allow splice to end a TLS record after prematurely ending a splice/sendfile
due to getting an EOF condition (->splice_read() returned 0) after splice
had called TLS with a sendmsg() with MSG_MORE set when the user didn't set
MSG_MORE.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/CAHk-=wh=V579PDYvkpnTobCLGczbgxpMgGmmhqiTyE34Cpi5Gg@mail.gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Boris Pismenny <borisp@nvidia.com>
cc: John Fastabend <john.fastabend@gmail.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08 19:40:30 -07:00
David Howells
2bfc668509 splice, net: Add a splice_eof op to file-ops and socket-ops
Add an optional method, ->splice_eof(), to allow splice to indicate the
premature termination of a splice to struct file_operations and struct
proto_ops.

This is called if sendfile() or splice() encounters all of the following
conditions inside splice_direct_to_actor():

 (1) the user did not set SPLICE_F_MORE (splice only), and

 (2) an EOF condition occurred (->splice_read() returned 0), and

 (3) we haven't read enough to fulfill the request (ie. len > 0 still), and

 (4) we have already spliced at least one byte.

A further patch will modify the behaviour of SPLICE_F_MORE to always be
passed to the actor if either the user set it or we haven't yet read
sufficient data to fulfill the request.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/CAHk-=wh=V579PDYvkpnTobCLGczbgxpMgGmmhqiTyE34Cpi5Gg@mail.gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Matthew Wilcox <willy@infradead.org>
cc: Jan Kara <jack@suse.cz>
cc: Jeff Layton <jlayton@kernel.org>
cc: David Hildenbrand <david@redhat.com>
cc: Christian Brauner <brauner@kernel.org>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Boris Pismenny <borisp@nvidia.com>
cc: John Fastabend <john.fastabend@gmail.com>
cc: linux-mm@kvack.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08 19:40:30 -07:00
David Howells
2dc334f1a6 splice, net: Use sendmsg(MSG_SPLICE_PAGES) rather than ->sendpage()
Replace generic_splice_sendpage() + splice_from_pipe + pipe_to_sendpage()
with a net-specific handler, splice_to_socket(), that calls sendmsg() with
MSG_SPLICE_PAGES set instead of calling ->sendpage().

MSG_MORE is used to indicate if the sendmsg() is expected to be followed
with more data.

This allows multiple pipe-buffer pages to be passed in a single call in a
BVEC iterator, allowing the processing to be pushed down to a loop in the
protocol driver.  This helps pave the way for passing multipage folios down
too.

Protocols that haven't been converted to handle MSG_SPLICE_PAGES yet should
just ignore it and do a normal sendmsg() for now - although that may be a
bit slower as it may copy everything.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08 19:40:30 -07:00
David Howells
81840b3b91 tls: Allow MSG_SPLICE_PAGES but treat it as normal sendmsg
Allow MSG_SPLICE_PAGES to be specified to sendmsg() but treat it as normal
sendmsg for now.  This means the data will just be copied until
MSG_SPLICE_PAGES is handled.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Boris Pismenny <borisp@nvidia.com>
cc: John Fastabend <john.fastabend@gmail.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08 19:40:30 -07:00
David Howells
4fe38acdac net: Block MSG_SENDPAGE_* from being passed to sendmsg() by userspace
It is necessary to allow MSG_SENDPAGE_* to be passed into ->sendmsg() to
allow sendmsg(MSG_SPLICE_PAGES) to replace ->sendpage().  Unblocking them
in the network protocol, however, allows these flags to be passed in by
userspace too[1].

Fix this by marking MSG_SENDPAGE_NOPOLICY, MSG_SENDPAGE_NOTLAST and
MSG_SENDPAGE_DECRYPTED as internal flags, which causes sendmsg() to object
if they are passed to sendmsg() by userspace.  Network protocol ->sendmsg()
implementations can then allow them through.

Note that it should be possible to remove MSG_SENDPAGE_NOTLAST once
sendpage is removed as a whole slew of pages will be passed in in one go by
splice through sendmsg, with MSG_MORE being set if it has more data waiting
in the pipe.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Boris Pismenny <borisp@nvidia.com>
cc: John Fastabend <john.fastabend@gmail.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Link: https://lore.kernel.org/r/20230526181338.03a99016@kernel.org/ [1]
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08 19:40:30 -07:00
Wes Huang
8631991997 net: usb: qmi_wwan: add support for Compal RXM-G1
Add support for Compal RXM-G1 which is based on Qualcomm SDX55 chip.
This patch adds support for two compositions:

0x9091: DIAG + MODEM + QMI_RMNET + ADB
0x90db: DIAG + DUN + RMNET + DPL + QDSS(Trace) + ADB

T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=05c6 ProdID=9091 Rev= 4.14
S:  Manufacturer=QCOM
S:  Product=SDXPRAIRIE-MTP _SN:719AB680
S:  SerialNumber=719ab680
C:* #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=896mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=84(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms

T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=05c6 ProdID=90db Rev= 4.14
S:  Manufacturer=QCOM
S:  Product=SDXPRAIRIE-MTP _SN:719AB680
S:  SerialNumber=719ab680
C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=896mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=84(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=8f(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms

Cc: stable@vger.kernel.org
Signed-off-by: Wes Huang <wes.huang@moxa.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20230608030141.3546-1-wes.huang@moxa.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08 19:39:31 -07:00
Eric Dumazet
736013292e tcp: let tcp_mtu_probe() build headless packets
tcp_mtu_probe() is still copying payload from skbs in the write queue,
using skb_copy_bits(), ignoring potential errors.

Modern TCP stack wants to only deal with payload found in page frags,
as this is a prereq for TCPDirect (host stack might not have access
to the payload)

Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230607214113.1992947-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08 19:31:06 -07:00
Jakub Kicinski
f84ad5cffd mlx5-updates-2023-06-06
1) Support 4 ports VF LAG, part 2/2
 2) Few extra trivial cleanup patches
 
 Shay Drory Says:
 ================
 
 Support 4 ports VF LAG, part 2/2
 
 This series continues the series[1] "Support 4 ports VF LAG, part1/2".
 This series adds support for 4 ports VF LAG (single FDB E-Switch).
 
 This series of patches refactoring LAG code that make assumptions
 about VF LAG supporting only two ports and then enable 4 ports VF LAG.
 
 Patch 1:
 - Fix for ib rep code
 Patches 2-5:
 - Refactors LAG layer.
 Patches 6-7:
 - Block LAG types which doesn't support 4 ports.
 Patch 8:
 - Enable 4 ports VF LAG.
 
 This series specifically allows HCAs with 4 ports to create a VF LAG
 with only 4 ports. It is not possible to create a VF LAG with 2 or 3
 ports using HCAs that have 4 ports.
 
 Currently, the Merged E-Switch feature only supports HCAs with 2 ports.
 However, upcoming patches will introduce support for HCAs with 4 ports.
 
 In order to activate VF LAG a user can execute:
 
 devlink dev eswitch set pci/0000:08:00.0 mode switchdev
 devlink dev eswitch set pci/0000:08:00.1 mode switchdev
 devlink dev eswitch set pci/0000:08:00.2 mode switchdev
 devlink dev eswitch set pci/0000:08:00.3 mode switchdev
 ip link add name bond0 type bond
 ip link set dev bond0 type bond mode 802.3ad
 ip link set dev eth2 master bond0
 ip link set dev eth3 master bond0
 ip link set dev eth4 master bond0
 ip link set dev eth5 master bond0
 
 Where eth2, eth3, eth4 and eth5 are net-interfaces of pci/0000:08:00.0
 pci/0000:08:00.1 pci/0000:08:00.2 pci/0000:08:00.3 respectively.
 
 User can verify LAG state and type via debugfs:
 /sys/kernel/debug/mlx5/0000\:08\:00.0/lag/state
 /sys/kernel/debug/mlx5/0000\:08\:00.0/lag/type
 
 [1]
 https://lore.kernel.org/netdev/20230601060118.154015-1-saeed@kernel.org/T/#mf1d2083780970ba277bfe721554d4925f03f36d1
 
 ================
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmSA7/0ACgkQSD+KveBX
 +j4faQgApm14Id8QTB0rSj9tO1tJFtSgCcpDN9DtyYWuq3B0rGW9CPC1rPdaFOlt
 xst7PtEaCiJu7a7dwlH/kFLSAlXpZHdUZA+VG8JF0aYV8qOV/0R0xQKZgP68kwkn
 vFZqZCzA1vR6egK3AweAjKAVaqDKSSKVlFGXJGzyNpGMWpGEEKodlZKCH7Jd580F
 UFhCqbyY8vccMUa3cvrLVjePUjdM1xxsLKHWmYXTaN2NkoLvOYXnXThElu7skm96
 Uqv8B9t2FoojZPBxgiJtoGKZ516+1dozORq7ioQug3oG9P/vpTY5QnTMKSZpJUTH
 5cdSCdqii4UDPqfe0PtdEdE1O2aWig==
 =A44p
 -----END PGP SIGNATURE-----

Merge tag 'mlx5-updates-2023-06-06' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5-updates-2023-06-06

1) Support 4 ports VF LAG, part 2/2
2) Few extra trivial cleanup patches

Shay Drory Says:
================

Support 4 ports VF LAG, part 2/2

This series continues the series[1] "Support 4 ports VF LAG, part1/2".
This series adds support for 4 ports VF LAG (single FDB E-Switch).

This series of patches refactoring LAG code that make assumptions
about VF LAG supporting only two ports and then enable 4 ports VF LAG.

Patch 1:
- Fix for ib rep code
Patches 2-5:
- Refactors LAG layer.
Patches 6-7:
- Block LAG types which doesn't support 4 ports.
Patch 8:
- Enable 4 ports VF LAG.

This series specifically allows HCAs with 4 ports to create a VF LAG
with only 4 ports. It is not possible to create a VF LAG with 2 or 3
ports using HCAs that have 4 ports.

Currently, the Merged E-Switch feature only supports HCAs with 2 ports.
However, upcoming patches will introduce support for HCAs with 4 ports.

In order to activate VF LAG a user can execute:

devlink dev eswitch set pci/0000:08:00.0 mode switchdev
devlink dev eswitch set pci/0000:08:00.1 mode switchdev
devlink dev eswitch set pci/0000:08:00.2 mode switchdev
devlink dev eswitch set pci/0000:08:00.3 mode switchdev
ip link add name bond0 type bond
ip link set dev bond0 type bond mode 802.3ad
ip link set dev eth2 master bond0
ip link set dev eth3 master bond0
ip link set dev eth4 master bond0
ip link set dev eth5 master bond0

Where eth2, eth3, eth4 and eth5 are net-interfaces of pci/0000:08:00.0
pci/0000:08:00.1 pci/0000:08:00.2 pci/0000:08:00.3 respectively.

User can verify LAG state and type via debugfs:
/sys/kernel/debug/mlx5/0000\:08\:00.0/lag/state
/sys/kernel/debug/mlx5/0000\:08\:00.0/lag/type

[1]
https://lore.kernel.org/netdev/20230601060118.154015-1-saeed@kernel.org/T/#mf1d2083780970ba277bfe721554d4925f03f36d1

================

* tag 'mlx5-updates-2023-06-06' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5e: simplify condition after napi budget handling change
  mlx5/core: E-Switch, Allocate ECPF vport if it's an eswitch manager
  net/mlx5: Skip inline mode check after mlx5_eswitch_enable_locked() failure
  net/mlx5e: TC, refactor access to hash key
  net/mlx5e: Remove RX page cache leftovers
  net/mlx5e: Expose catastrophic steering error counters
  net/mlx5: Enable 4 ports VF LAG
  net/mlx5: LAG, block multiport eswitch LAG in case ldev have more than 2 ports
  net/mlx5: LAG, block multipath LAG in case ldev have more than 2 ports
  net/mlx5: LAG, change mlx5_shared_fdb_supported() to static
  net/mlx5: LAG, generalize handling of shared FDB
  net/mlx5: LAG, check if all eswitches are paired for shared FDB
  {net/RDMA}/mlx5: introduce lag_for_each_peer
  RDMA/mlx5: Free second uplink ib port
====================

Link: https://lore.kernel.org/r/20230607210410.88209-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08 19:28:21 -07:00
Justin Chen
55b24334c0 ethtool: ioctl: improve error checking for set_wol
The netlink version of set_wol checks for not supported wolopts and avoids
setting wol when the correct wolopt is already set. If we do the same with
the ioctl version then we can remove these checks from the driver layer.

Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/1686179653-29750-1-git-send-email-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08 19:24:54 -07:00
Jakub Kicinski
68bd67b43f Merge branch 'complete-lynx-mdio-device-handling'
Russell King says:

====================
complete Lynx mdio device handling

This series completes the mdio device lifetime handling for Lynx PCS
users which do not create their own mdio device, but instead fetch
it using a firmware description - namely the DPAA2 and FMAN_MEMAC
drivers.

In a previous patch set, lynx_pcs_create() was modified to increase
the mdio device refcount, and lynx_pcs_destroy() to drop that
refcount.

The first two patches change these two drivers to put the reference
which they hold immediately after lynx_pcs_create(), effectively
handing the responsibility for maintaining the refcount to the Lynx
PCS driver.

A side effect of the first two patches is that lynx_get_mdio_device()
is no longer used, so patch 3 removes it.

Patch 4 adds a new helper - lynx_pcs_create_fwnode(), which creates
a Lynx PCS instance from the fwnode.

Patch 5 and 6 convert the two drivers to make use of this new helper,
which simply has to find the mdio device, and then create the Lynx
PCS from that.

With those conversions done, lynx_pcs_create() is no longer required
outside pcs-lynx.c, so remove it from public view.

Patch 8 we changes lynx_pcs_create() to return an error-pointer rather
than NULL to bring consistency to the return style, and means that we
can remove the NULL-to-error-pointer conversion from both
lynx_pcs_create_fwnode() and lynx_pcs_create_mdiodev().

Patch 9 adds a check for the fwnode being available, and returns an
-ENODEV error pointer if unavailable.

Patch 10 removes this check from DPAA2, detecting the error pointer
value to continue printing the helpful message.

Patch 11 removes this check from fman_memac, and in doing so fixes a
bug where if the node is unavailable, the reference count is not
dropped.
====================

Link: https://lore.kernel.org/r/ZIBwuw+IuGQo5yV8@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08 19:19:52 -07:00
Russell King (Oracle)
32fc30353f net: fman_memac: use pcs-lynx's check for fwnode availability
Use pcs-lynx's check rather than our own when determining if the device
is available. This fixes a bug where the reference gained by
of_parse_phandle() is not dropped if the device is not available.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08 19:19:50 -07:00
Russell King (Oracle)
8c1d0b339d net: dpaa2: use pcs-lynx's check for fwnode availability
Use pcs-lynx's check rather than our own when determining if the device
is available.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08 19:19:50 -07:00
Russell King (Oracle)
d143898c6d net: pcs: lynx: check that the fwnode is available prior to use
Check that the fwnode is marked as available prior to trying to lookup
the PCS device, and return -ENODEV if unavailable. Document the return
codes from lynx_pcs_create_fwnode().

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08 19:19:50 -07:00
Russell King (Oracle)
05b606b884 net: pcs: lynx: change lynx_pcs_create() to return error-pointers
Change lynx_pcs_create() to return an error-pointer on failure to
allocate memory, rather than returning NULL. This allows the removal
of the conversion in lynx_pcs_create_fwnode() and
lynx_pcs_create_mdiodev().

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08 19:19:50 -07:00
Russell King (Oracle)
84e476b876 net: pcs: lynx: make lynx_pcs_create() static
We no longer need to export lynx_pcs_create() for drivers to use as we
now have all the functionality we need in the two new creation helpers.
Remove the export and prototype, and make it static.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08 19:19:50 -07:00
Russell King (Oracle)
929a629c21 net: fman_memac: use lynx_pcs_create_fwnode()
Use lynx_pcs_create_fwnode() to create a lynx PCS from a fwnode handle.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08 19:19:50 -07:00
Russell King (Oracle)
595fa7634d net: dpaa2-mac: use lynx_pcs_create_fwnode()
Use lynx_pcs_create_fwnode() to create a lynx PCS from a fwnode handle.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08 19:19:50 -07:00