blk_mark_disk_dead does very similar work a a section of del_gendisk:
- set the GD_DEAD flag
- set the capacity to zero
- start a queue drain
but del_gendisk also sets QUEUE_FLAG_DYING on the queue if it is owned by
the disk, sets the capacity to zero before starting the drain, and both
with sending a uevent and kernel message for this fake capacity change.
Move the exact logic from the more heavily used del_gendisk into
blk_mark_disk_dead and then call blk_mark_disk_dead from del_gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no reason for this lock to spin, and being able to sleep under
it will come in handy soon.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The long if/else chain obsfucates the actual logic. Tidy it up to be
more structured. Also drop the whole argument, as it can be trivially
derived from bdev using bdev_whole, and having the bdev_whole in the
function makes it easier to follow.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move all the logic to release an exclusive claim into a helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The new binaries that support the 2-step authentication contain the
legacy-style binary, which we can use for loading the HuC via DMA. To
find out where this is located in the image, we need to parse the
manifest of the GSC-enabled HuC binary. The manifest consist of a
partition header followed by entries, one of which contains the offset
we're looking for.
Note that the DG2 GSC binary contains entries with the same names, but
it doesn't contain a full legacy binary, so we need to skip assigning
the dma offset in that case (which we can do by checking the ccs).
Also, since we're now parsing the entries, we can extract the HuC
version that way instead of using hardcoded offsets.
Note that the GSC binary uses the same structures in its binary header,
so they've been added in their own header file.
v2: fix structure names to match meu defines (s/CPT/CPD/), update commit
message, check ccs validity, drop old version location defines.
v3: drop references to the MEU tool to reduce confusion, fix log (John)
v4: fix log for real (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> #v2
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230531235415.1467475-3-daniele.ceraolospurio@intel.com
Now that each FW has its own reserved area, we can keep them always
pinned and skip the pin/unpin dance on reset. This will make things
easier for the 2-step HuC authentication, which requires the FW to be
pinned in GGTT after the xfer is completed.
Since the vma is now valid for a long time and not just for the quick
pin-load-unpin dance, the name "dummy" is no longer appropriare and has
been replaced with vma_res. All the functions have also been updated to
operate on vma_res for consistency.
Given that we pin the vma behind the allocator's back (which is ok
because we do the pinning in an area that was previously reserved for
thus purpose), we do need to explicitly re-pin on resume because the
automated helper won't cover us.
v2: better comments and commit message, s/dummy/vma_res/
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230531235415.1467475-2-daniele.ceraolospurio@intel.com
__KERNEL_SYSCALLS__ hasn't been needed since Linux 2.6.19 so stop
defining it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20230601151646.1386867-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add the MOPS hwcap to the hwcap kselftest and check that a SIGILL is not
generated when the feature is detected. A SIGILL is reliable when the
feature is not detected as SCTLR_EL1.MSCEn won't have been set.
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230509142235.3284028-12-kristina.martsenko@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Make it possible to disable the MOPS extension at runtime using the
kernel command line. This can be useful for testing or working around
hardware issues. For example it could be used to test new memory copy
routines that do not use MOPS instructions (e.g. from Arm Optimized
Routines).
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Link: https://lore.kernel.org/r/20230509142235.3284028-11-kristina.martsenko@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The Arm v8.8/9.3 FEAT_MOPS feature provides new instructions that
perform a memory copy or set. Wire up the cpufeature code to detect the
presence of FEAT_MOPS and enable it.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Link: https://lore.kernel.org/r/20230509142235.3284028-10-kristina.martsenko@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When a MOPS main or epilogue instruction is being executed, the task may
get scheduled on a different CPU and restart execution from the prologue
instruction. If the main or epilogue instruction is being single stepped
then it makes sense to finish the step and take the step exception
before starting to execute the next (prologue) instruction. So
fast-forward the single step state machine when taking a MOPS exception.
This means that if a main or epilogue instruction is single stepped with
ptrace, the debugger will sometimes observe the PC moving back to the
prologue instruction. (As already mentioned, this should be rare as it
only happens when the task is scheduled to another CPU during the step.)
This also ensures that perf breakpoints count prologue instructions
consistently (i.e. every time they are executed), rather than skipping
them when there also happens to be a breakpoint on a main or epilogue
instruction.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Link: https://lore.kernel.org/r/20230509142235.3284028-9-kristina.martsenko@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The memory copy/set instructions added as part of FEAT_MOPS can take an
exception (e.g. page fault) part-way through their execution and resume
execution afterwards.
If however the task is re-scheduled and execution resumes on a different
CPU, then the CPU may take a new type of exception to indicate this.
This is because the architecture allows two options (Option A and Option
B) to implement the instructions and a heterogeneous system can have
different implementations between CPUs.
In this case the OS has to reset the registers and restart execution
from the prologue instruction. The algorithm for doing this is provided
as part of the Arm ARM.
Add an exception handler for the new exception and wire it up for
userspace tasks.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Link: https://lore.kernel.org/r/20230509142235.3284028-8-kristina.martsenko@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
As FEAT_MOPS is not supported in guests yet, hide it from the ID
registers for guests.
The MOPS instructions are UNDEFINED in guests as HCRX_EL2.MSCEn is not
set in HCRX_GUEST_FLAGS, and will take an exception to EL1 if executed.
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20230509142235.3284028-7-kristina.martsenko@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
To allow nVHE host EL0 and EL1 to use FEAT_MOPS instructions, configure
EL2 to not cause these instructions to be treated as UNDEFINED. A VHE
host is unaffected by this control.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Link: https://lore.kernel.org/r/20230509142235.3284028-6-kristina.martsenko@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
FEAT_MOPS introduces new instructions, we require that these
instructions not execute as UNDEFINED when we identify that the feature
is supported.
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Link: https://lore.kernel.org/r/20230509142235.3284028-5-kristina.martsenko@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Switch the HCRX_EL2 register between host and guest configurations, in
order to enable different features in the host and guest.
Now that there are separate guest flags, we can also remove SMPME from
the host flags, as SMPME is used for virtualizing SME priorities and has
no use in the host.
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20230509142235.3284028-4-kristina.martsenko@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Detect if the system has the new HCRX_EL2 register added in ARMv8.7/9.2,
so that subsequent patches can check for its presence.
KVM currently relies on the register being present on all CPUs (or
none), so the kernel will panic if that is not the case. Fortunately no
such systems currently exist, but this can be revisited if they appear.
Note that the kernel will not panic if CONFIG_KVM is disabled.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Link: https://lore.kernel.org/r/20230509142235.3284028-3-kristina.martsenko@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
ARMv8.7/9.2 adds a new hypervisor configuration register HCRX_EL2.
Initialize the register to a safe value (all fields 0), to be robust
against firmware that has not initialized it. This is also needed to
ensure that the register is reinitialized after a kexec by a future
kernel.
In addition, move SMPME setup over to the new flags, as it would
otherwise get overridden. It is safe to set the bit even if SME is not
(uniformly) supported, as it will write to a RES0 bit (having no
effect), and SME will be disabled by the cpufeature framework.
(Similar to how e.g. the API bit is handled in HCR_HOST_NVHE_FLAGS.)
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20230509142235.3284028-2-kristina.martsenko@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Apparently desktop gen3 parts don't support the
10bit gamma mode at all. Stop claiming otherwise.
As is the case with pipe A on gen3 mobile parts, the
PIPECONF gamma mode bit can be set but it has no
effect on the output.
PNV seems to be the only slight exception, but generally
the desktop PNV variant looks more like a mobile part so
this is not entirely surprising.
Fixes: 67630bacae ("drm/i915: Add 10bit gamma mode for gen2/3")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230531135625.3467-1-ville.syrjala@linux.intel.com
SM6375 has a "Qualcomm SMMU V2" implementation for its GPU SMMU. It
does not however qualify for the qcom,adreno-smmu compatible, as it can
not do split pagetables. It consumes a single clock and a single genpd.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230531-topic-sm6375_gpusmmu-v1-1-860943894c71@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Several device tree files get the polarity of the pendown-gpios
wrong: this signal is active low. Fix up all incorrect flags, so
that operating systems can rely on the flag being correctly set.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230510105156.1134320-1-linus.walleij@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It contains:
- fix imbalanced reference counter for ethernet devices; without it
system hangs after consecutive suspend/resume cycles;
- fix debounce delay property for shutdown controller; the initial DT
property is not what the driver expects.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCZHXQCQAKCRCejrg/N2X7
/USYAP0ZZsxsFtaxYEj+ZpkOOM5QjUKmxRBF5EKpvT6Y18x1yAD/em5J/Qwe7k+T
QxnajMvdb91RwupjZp9kGSJjU9BJfAg=
=kXQQ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=s5VF
-----END PGP SIGNATURE-----
Merge tag 'at91-fixes-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes
AT91 fixes for 6.4
It contains:
- fix imbalanced reference counter for ethernet devices; without it
system hangs after consecutive suspend/resume cycles;
- fix debounce delay property for shutdown controller; the initial DT
property is not what the driver expects.
* tag 'at91-fixes-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sama7g5ek: fix debounce delay property for shdwc
ARM: at91: pm: fix imbalanced reference counter for ethernet devices
Link: https://lore.kernel.org/r/20230530105930.11621-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Register scheme for SM8550 LLCC is corrected to avoid using the wrong
register offsets. SDRAM frequency for misidentified SC7180-lite boards
is handled. The datatype for Soundwire interval on SM8550 is corrected.
The resource controller on SC8280XP is added to the CPU cluster
power-domain to get notified to send cached sleep and wake votes before
going entering the lower power states.
SA8155P power-domains that differ from what's inherited from the SM8150
DeviceTree are adjusted to make the platform boot again.
Remoteproc firmware paths are corrected for Sony Xperia 10 IV.
Cache properties are adjusted across a range of platforms, to meet
changes in the binding.
Panel compatibles are corrected for Xiaomi Mi Pad 5 Pro, to match
binding. Invalid dai-cells are dropped from SC7280 devices, to match
binding.
The incorrect removal of "input-enable" from the LPASS pinctrl node of
SC8280XP was reverted, to get dmic pins in the correct state again.
The incorrect input-enable property is dropped from a msm8974, mdm9615
and apq8026 to resolve a range of DT validation warnings, incorrectly
picked up through the ARM64 tree.
-----BEGIN PGP SIGNATURE-----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=62ow
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=TSqN
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-fixes-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm ARM64 DeviceTree fixes for 6.4
Register scheme for SM8550 LLCC is corrected to avoid using the wrong
register offsets. SDRAM frequency for misidentified SC7180-lite boards
is handled. The datatype for Soundwire interval on SM8550 is corrected.
The resource controller on SC8280XP is added to the CPU cluster
power-domain to get notified to send cached sleep and wake votes before
going entering the lower power states.
SA8155P power-domains that differ from what's inherited from the SM8150
DeviceTree are adjusted to make the platform boot again.
Remoteproc firmware paths are corrected for Sony Xperia 10 IV.
Cache properties are adjusted across a range of platforms, to meet
changes in the binding.
Panel compatibles are corrected for Xiaomi Mi Pad 5 Pro, to match
binding. Invalid dai-cells are dropped from SC7280 devices, to match
binding.
The incorrect removal of "input-enable" from the LPASS pinctrl node of
SC8280XP was reverted, to get dmic pins in the correct state again.
The incorrect input-enable property is dropped from a msm8974, mdm9615
and apq8026 to resolve a range of DT validation warnings, incorrectly
picked up through the ARM64 tree.
* tag 'qcom-arm64-fixes-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sm8550: Use the correct LLCC register scheme
arm64: dts: qcom: sc7180-lite: Fix SDRAM freq for misidentified sc7180-lite boards
arm64: dts: qcom: sm8550: use uint16 for Soundwire interval
arm64: dts: qcom: Split out SA8155P and use correct RPMh power domains
arm64: dts: qcom: sm6375-pdx225: Fix remoteproc firmware paths
arm64: dts: qcom: add missing cache properties
arm64: dts: qcom: use decimal for cache level
arm64: dts: qcom: fix indentation
ARM: dts: qcom: msm8974: remove superfluous "input-enable"
ARM: dts: qcom: mdm9615: remove superfluous "input-enable"
ARM: dts: qcom: apq8026: remove superfluous "input-enable"
arm64: dts: qcom: sm8250-xiaomi-elish-csot: fix panel compatible
arm64: dts: qcom: sm8250-xiaomi-elish-boe: fix panel compatible
arm64: dts: qcom: sc7280-qcard: drop incorrect dai-cells from WCD938x SDW
arm64: dts: qcom: sc7280-idp: drop incorrect dai-cells from WCD938x SDW
arm64: dts: qcom: sc8280xp: Flush RSC sleep & wake votes
arm64: dts: qcom: sc8280xp: Revert "arm64: dts: qcom: sc8280xp: remove superfluous "input-enable""
Link: https://lore.kernel.org/r/20230601142659.2246348-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The GPU SMMU will require the clocks property to be set so put the
relevant compatible into the adreno if-then block.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230417125844.400782-5-brgl@bgdev.pl
[will: Fixed conflict with 'qcom,sc8280xp-smmu-500' entry]
Signed-off-by: Will Deacon <will@kernel.org>
Error paths is corrected across icc-bwmon, rpmh-rsc, ramp_controller and
rmtfs. The ice module is renamed qcom_ice, to avoid clashing with
existing "ice" driver.
SA8155P-specific RPMh power-domains are introduced to avoid the code
trying to access resources that exists on SM8150, but not on SA8155P.
Lastly, changes to the EDAC driver to fix an issue where the driver
performs mmio based on the wrong register map.
-----BEGIN PGP SIGNATURE-----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=icu7
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmR+AMAACgkQYKtH/8kJ
UidzSA//bsg1vu0o8HgbJaTj175jSVh/FqJhIVjK5FrCVJCAS8brAmaPg35qN9Fs
8HyZVjEfx0P2Xg7FITIYIKajW8FtMTM0bVeb0P6LMa7DmYT5emm6CS5iOjFNBsZN
zau26lEKzTefmXUqbxQb9urzlpsil7RfhzJ+LYCfpODWt9/cPDCoTVV1vFj6M7Mr
Rp0ZvhZHeH/tBRFjXcQZYpsdxJFYTkgAf4weOqr2mqgK/HyXhm4bZQMKyRQgEozD
LODl1UfhQ7bOnA3PhLsJ2+BlOeUCOizx7PRuPpSnmKo5qzyUs6M4m6BCXDLBQ4N5
ynDrLSdxgcRWvLiFkri2zdW545MmryKGGP9l4Vus52kAEmhFaHg3hQC97l73NMV4
XZSVPHd64I18FpW4hHH2vRtVvU4Yeu+FRduQs7ghHg5wUKGlSMZLZdrTrxjvmKYq
8R8E/gcCeqOywQgOfisvSc30iDPwxohs2iaHD2J8W9NduafVmDlQjvH6dx1nK1YW
CwIfPO/87eOoGkZlrkL8nacqMiQC5YTg9vUpkOxVmyrFTz/hqZI8V04OXc2kBvZk
Af6nAFjVIaX/hKukSKJLpu9sg8WU6Nc/4UeHCUHKsUdCxtC+p3FabG8DMw6wSbFz
3p8q1LEUW7TXazrqGhFV43q+zz/z585NwYNr+FW/7RwdgCu+3rE=
=qhFg
-----END PGP SIGNATURE-----
Merge tag 'qcom-driver-fixes-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm driver fixes for 6.4
Error paths is corrected across icc-bwmon, rpmh-rsc, ramp_controller and
rmtfs. The ice module is renamed qcom_ice, to avoid clashing with
existing "ice" driver.
SA8155P-specific RPMh power-domains are introduced to avoid the code
trying to access resources that exists on SM8150, but not on SA8155P.
Lastly, changes to the EDAC driver to fix an issue where the driver
performs mmio based on the wrong register map.
* tag 'qcom-driver-fixes-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
EDAC/qcom: Get rid of hardcoded register offsets
EDAC/qcom: Remove superfluous return variable assignment in qcom_llcc_core_setup()
dt-bindings: cache: qcom,llcc: Fix SM8550 description
soc: qcom: rpmhpd: Add SA8155P power domains
dt-bindings: power: qcom,rpmpd: Add SA8155P
soc: qcom: Rename ice to qcom_ice to avoid module name conflict
soc: qcom: rmtfs: Fix error code in probe()
soc: qcom: ramp_controller: Fix an error handling path in qcom_ramp_controller_probe()
soc: qcom: rpmh-rsc: drop redundant unsigned >=0 comparision
soc: qcom: icc-bwmon: fix incorrect error code passed to dev_err_probe()
Link: https://lore.kernel.org/r/20230601141058.2246039-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A range of 32-bit Qualcomm platforms are missing cache-unified, which is
now required by the binding, this is now corrected.
-----BEGIN PGP SIGNATURE-----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=Qnr3
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=OeZW
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-fixes-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm ARM32 fix for 6.4
A range of 32-bit Qualcomm platforms are missing cache-unified, which is
now required by the binding, this is now corrected.
* tag 'qcom-dts-fixes-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: add missing cache properties
Link: https://lore.kernel.org/r/20230601140347.2245680-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Here is a small fix to make an unconditional copy of the buffer passed
to crypto operations, to take into account the case of the stack not in
the linear mapping area.
It has been tested and verified to fix the bug.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
-----BEGIN PGP SIGNATURE-----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=DveW
-----END PGP SIGNATURE-----
Merge tag 'asym-keys-fix-for-linus-v6.4-rc5' of https://github.com/robertosassu/linux
Pull asymmetric keys fix from Roberto Sassu:
"Here is a small fix to make an unconditional copy of the buffer passed
to crypto operations, to take into account the case of the stack not
in the linear mapping area.
It has been tested and verified to fix the bug"
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: David Howells <dhowells@redhat.com>
* tag 'asym-keys-fix-for-linus-v6.4-rc5' of https://github.com/robertosassu/linux:
KEYS: asymmetric: Copy sig and digest in public_key_verify_signature()
The qcom,sc8280xp-smmu-500 Adreno SMMU binding has clocks, so fix up the
binding to allow this.
Fixes: 38db6b41b2 ("dt-bindings: arm-smmu: Add compatible for Qualcomm SC8280XP")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230523010441.63236-1-quic_bjorande@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
Notice that all of the objects for which the acpi_scan_check_dep()
return value is greater than 0 are present in acpi_dep_list as consumers
(there may be multiple entries for one object, but that is not a
problem), so after carrying out the initial ACPI namespace walk in which
devices with dependencies are skipped, acpi_bus_scan() can simply walk
acpi_dep_list and enumerate all of the unique consumer objects from
there and their descendants instead of walking the entire target branch
of the ACPI namespace and looking for device objects that have not been
enumerated yet in it.
Because walking acpi_dep_list is generally less overhead than walking
the entire ACPI namespace, use the observation above to reduce the
system initialization overhead related to ACPI, which is particularly
important on large systems.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
When add_dquot_ref() fails (usually due to IO error or ENOMEM), we want
to disable quotas we are trying to enable. However dquot_disable() call
was passed just the flags we are enabling so in case flags ==
DQUOT_USAGE_ENABLED dquot_disable() call will just fail with EINVAL
instead of properly disabling quotas. Fix the problem by always passing
DQUOT_LIMITS_ENABLED | DQUOT_USAGE_ENABLED to dquot_disable() in this
case.
Reported-and-tested-by: Ye Bin <yebin10@huawei.com>
Reported-by: syzbot+e633c79ceaecbf479854@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230605140731.2427629-2-yebin10@huawei.com>
Currently the read event packet size in snd_seq_read() is defined by
client->midi_version value that is guaranteed to be zero if UMP isn't
enabled. But the static analyzer doesn't know of the fact, and it
still suspects as if it were leading to a potential overflow.
Add the more explicit check of CONFIG_SND_SEQ_UMP to determine the
aligned_size value for avoiding the confusion.
Fixes: 46397622a3 ("ALSA: seq: Add UMP support")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202305261415.NY0vapZK-lkp@intel.com/
Link: https://lore.kernel.org/r/20230605144758.6677-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The CTI module has some hard coded refcounting code that has a leak.
For example running perf and then trying to unload it fails:
perf record -e cs_etm// -a -- ls
rmmod coresight_cti
rmmod: ERROR: Module coresight_cti is in use
The coresight core already handles references of devices in use, so by
making CTI a normal helper device, we get working refcounting for free.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-14-james.clark@arm.com
Currently CATU is the only helper device, and its enable and disable
calls are hard coded. To allow more helper devices to be added in a
generic way, remove these hard coded calls and just enable and disable
all helper devices.
This has to apply to helpers adjacent to the path, because they will
never be in the path. CATU was already discovered in this way, so
there is no change there.
One change that is needed is for CATU to call back into ETR to allocate
the buffer. Because the enable call was previously hard coded, it was
done at a point where the buffer was already allocated, but this is no
longer the case.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-13-james.clark@arm.com
When CATU is moved to the generic enable/disable path system in the
next commit, it will need to call into ETR and get it to pre-allocate
its buffer so add a function for it.
No functional changes
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-12-james.clark@arm.com
This removes the need to do an additional lookup for the total number
of ports used and also removes the need to allocate an array of
refcounts which is just another representation of a connection array.
This was only used for link type devices, for regular devices a single
refcount on the coresight device is used.
There is a both an input and output refcount in case two link type
devices are connected together so that they don't overwrite each other's
counts.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-11-james.clark@arm.com
This will allow CATU to get its associated ETR in a generic way where
currently the enable path has some hard coded searches which avoid
the need to store input connections.
This also means that the full search for connected devices on removal
can be replaced with a loop through only the input and output devices.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-10-james.clark@arm.com
There is some duplication between coresight_fixup_device_conns() and
coresight_fixup_orphan_conns(). They both do the same thing except for
the fact that coresight_fixup_orphan_conns() can't handle iterating over
itself.
By making it able to handle fixing up it's own connections the other
function can be removed.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-9-james.clark@arm.com
This will allow the same connection object to be referenced via the
input connection list in a later commit rather than duplicating them.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-8-james.clark@arm.com
Add a function for adding connections dynamically. This also removes
the 1:1 mapping between port number and the index into the connections
array. The only place this mapping was used was in the warning for
duplicate output ports, which has been replaced by a search. Other
uses of the port number already use the port member variable.
Being able to dynamically add connections will allow other devices like
CTI to re-use the connection mechanism despite not having explicit
connections described in the DT.
The connections array is now no longer sparse, so child_fwnode doesn't
need to be checked as all connections have a target node. Because the
array is no longer sparse, the high in and out port numbers are required
for the refcount arrays. But these will also be removed in a later
commit when the refcount is made a property of the connection.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-7-james.clark@arm.com
When input connections are added they will use the same connection
object as the output so parent and child could be misinterpreted. Making
the direction unambiguous in the names should improve readability.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-6-james.clark@arm.com
Rename to avoid confusion between port number and the index in the
connection array. The port number is already stored in the connection,
and in a later commit the connection array will be appended to, so
the length of it will no longer reflect the number of ports.
No functional changes.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-5-james.clark@arm.com
conns is actually for output connections. Change the name to make it
clearer and so that we can add input connections later.
No functional changes.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-4-james.clark@arm.com
mode is stored as a local_t, but it is also passed around a lot as a
plain u32, so use the correct type wherever local_t isn't currently
used. This helps a little bit with readability.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-3-james.clark@arm.com
child_fwnode should be a read only property based on the DT or ACPI. If
it's cleared on the parent device when a child is unloaded, then when
the child is loaded again the connection won't be remade.
child_dev should be cleared instead which signifies that the connection
should be remade when the child_fwnode registers a new coresight_device.
Similarly the reference count shouldn't be decremented as long as the
parent device exists. The correct place to drop the reference is in
coresight_release_platform_data() which is already done.
Reproducible on Juno with the following steps:
# load all coresight modules.
$ cd /sys/bus/coresight/devices/
$ echo 1 > tmc_etr0/enable_sink
$ echo 1 > etm0/enable_source
# Works fine ^
$ echo 0 > etm0/enable_source
$ rmmod coresight-funnel
$ modprobe coresight-funnel
$ echo 1 > etm0/enable_source
-bash: echo: write error: Invalid argument
Fixes: 37ea1ffddf ("coresight: Use fwnode handle instead of device names")
Fixes: 2af89ebacf ("coresight: Clear the connection field properly")
Tested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-2-james.clark@arm.com