Add fatal error checking for the pm8001_phy_control() and
pm8001_lu_reset() functions.
Signed-off-by: Changyuan Lyu <changyuanl@google.com>
Signed-off-by: Pranav Prasad <pranavpp@google.com>
Link: https://lore.kernel.org/r/20230526235155.433243-1-pranavpp@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends not
being declared. We thus need to add HAS_IOPORT as dependency for those
drivers using them.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20230522105049.1467313-32-schnelle@linux.ibm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends not
being declared. We thus need to add HAS_IOPORT as dependency for those
drivers using them.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20230522105049.1467313-22-schnelle@linux.ibm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-----BEGIN PGP SIGNATURE-----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=UVOh
-----END PGP SIGNATURE-----
Merge tag '6.4-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
"Four small smb3 client fixes:
- two small fixes suggested by kernel test robot
- small cleanup fix
- update Paulo's email address in the maintainer file"
* tag '6.4-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: address unused variable warning
smb: delete an unnecessary statement
smb3: missing null check in SMB2_change_notify
smb3: update a reviewer email in MAINTAINERS file
Justin Tee <justintee8345@gmail.com> says:
Update lpfc to revision 14.2.0.13
This patch set contains discovery bug fixes, firmware logging
improvements, clean up of CQ handling, and statistics collection
enhancements.
The patches were cut against Martin's 6.5/scsi-queue tree.
Link: https://lore.kernel.org/r/20230523183206.7728-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Various improvements are made for collecting congestion statistics:
- Pre-existing logic is replaced with use of an hrtimer for increased
reporting accuracy.
- Congestion timestamp information is reorganized into a single struct.
- Common statistic collection logic is refactored into a helper routine.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230523183206.7728-8-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is mishandling of SLI-4 CQE status values larger than what is allowed
by the LPFC_IOCB_STATUS_MASK of 4 bits. The LPFC_IOCB_STATUS_MASK is a
leftover SLI-3 construct and serves no purpose in SLI-4 path.
Remove the LPFC_IOCB_STATUS_MASK and clean up general CQE status handling
in SLI-4 completion paths.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230523183206.7728-7-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A firmware upgrade does not necessitate dumping of phba->dbg_log[] to kmsg
via LOG_TRACE_EVENT. A simple KERN_NOTICE log message should suffice to
notify the user of successful or unsuccessful firmware upgrade. As such,
firmware upgrade log messages are updated to use KERN_NOTICE instead of
LOG_TRACE_EVENT. Additionally, in order to notify the user of reset type
for instantiating newly downloaded firmware, lpfc_log_msg's default
KERN_LEVEL is updated to 5 or KERN_NOTICE.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230523183206.7728-6-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When NPIV ports are zoned to devices that support both initiator and target
mode, a remote device's initiated PRLI results in unintended final kref
clean up of the device's ndlp structure. This disrupts NPIV ports'
discovery for target devices that support both initiator and target mode.
Modify the NPIV lpfc_drop_node clause such that we allow the ndlp to live
so long as it was in NLP_STE_PLOGI_ISSUE, NLP_STE_REG_LOGIN_ISSUE, or
NLP_STE_PRLI_ISSUE nlp_state. This allows lpfc's issued PRLI completion
routine to determine if the final kref clean up should execute rather than
a remote device's issued PRLI.
Fixes: db651ec225 ("scsi: lpfc: Correct used_rpi count when devloss tmo fires with no recovery")
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230523183206.7728-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pre-existing device loss recovery logic via the NLP_IN_RECOV_POST_DEV_LOSS
flag only handled Fabric Port Login, Fabric Controller, Management, and
Name Server addresses.
Fabric domain controllers fall under the same category for usage of the
NLP_IN_RECOV_POST_DEV_LOSS flag. Add a default case statement to mark an
ndlp for device loss recovery.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230523183206.7728-4-justintee8345@gmail.com
Acked-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In dev_loss_tmo callback routine, we early return if the ndlp is in a state
of rediscovery. This occurs when a target proactively PLOGIs or PRLIs
after an RSCN before the dev_loss_tmo callback routine is scheduled to run.
Move clear of the NLP_IN_DEV_LOSS flag before the ndlp state check in such
cases.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230523183206.7728-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Due to a target port D_ID swap, it is possible for the
lpfc_register_remote_port() routine to touch post mortem fc_rport memory
when trying to access fc_rport->dd_data.
The D_ID swap causes a simultaneous call to lpfc_unregister_remote_port(),
where fc_remote_port_delete() reclaims fc_rport memory.
Remove the fc_rport->dd_data->pnode NULL assignment because the following
line reassigns ndlp->rport with an fc_rport object from
fc_remote_port_add() anyways. The pnode nullification is superfluous.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230523183206.7728-2-justintee8345@gmail.com
Acked-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
strlcpy() reads the entire source buffer first. This read may exceed the
destination size limit. This is both inefficient and can lead to linear
read overflows if a source string is not NUL-terminated [1]. In an effort
to remove strlcpy() completely [2], replace strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Link: https://lore.kernel.org/r/20230530162321.984035-1-azeemshaikh38@gmail.com
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add the define for PCI_EXT_CAP_ID_PL_32GT for drivers that will want this
whilst doing Gen5/Gen6 accesses.
Link: https://lore.kernel.org/r/20230531095713.293229-1-ben.dooks@codethink.co.uk
Signed-off-by: Ben Dooks <ben.dooks@sifive.com>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Separate jpegbRAS poison consumption handling from the instance irq, and
register dedicated ras_poison_irq src and funcs for UVD_POISON.
v2:
- Separate ras irq from jpeg instance irq
- Improve the subject and code comments
v3:
- Split the patch into three parts
- Improve the code comments
Suggested-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Separate vcn RAS poison consumption handling from the instance irq, and
register dedicated ras_poison_irq src and funcs for UVD_POISON.
v2:
- Separate ras irq from vcn instance irq
- Improve the subject and code comments
v3:
- Split the patch into three parts
- Improve the code comments
Suggested-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This adds a DT node to hook up the internal temperature ADC to the
iio-hwmon driver. The various voltage + current ADCs are consumed and
exposed by their respective drivers, but this is not and is always
available. Naming chosen to match the axp20x_ prefix the power sensors
use.
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/2a9bd53a65c4a154cccba622c60cbffcdceaeb95.1683719613.git.noodles@earth.li
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The C.H.I.P has an rtl8723bs device with the bluetooth interface hooked
up on UART3. Support for this didn't exist in mainline when the DTS was
initially added, but it does now, so enable it.
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/49ff7f3cc79838a55a89baae09a4ba12c88573fb.1683719613.git.noodles@earth.li
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
There's one PER_VCPU_DEBUG in per-vcpu uffd threads but it's never hit.
Trigger that when quit in normal ways (kick pollfd[1]), meanwhile fix the
number of nanosec calculation.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20230427201112.2164776-3-peterx@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
This fixes two things:
- Unbreaks MISSING mode test on anonymous memory type
- Prefault alias mem before uffd thread creations, otherwise the uffd
thread timing will be inaccurate when guest mem size is large, because
it'll take prefault time into total time.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20230427201112.2164776-2-peterx@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
This reverts commit ce560ac402.
It depends on its parent commit, which we want to revert.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
[Hamza: fix a whitespace issue in dcn30_prepare_bandwidth()]
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch reverses the DPM clocks levels output of pp_dpm_mclk
and pp_dpm_fclk for renoir.
On dGPUs and older APUs we expose the levels from lowest clocks
to highest clocks. But for some APUs, the clocks levels are
given the reversed orders by PMFW. Like the memory DPM clocks
that are exposed by pp_dpm_mclk.
It's not intuitive that they are reversed on these APUs. All tools
and software that talks to the driver then has to know different ways
to interpret the data depending on the asic.
So we need to reverse them to expose the clocks levels from the
driver consistently.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This patch reverses the DPM clocks levels output of pp_dpm_mclk
and pp_dpm_fclk.
On dGPUs and older APUs we expose the levels from lowest clocks
to highest clocks. But for some APUs, the clocks levels that from
the DFPstateTable are given the reversed orders by PMFW. Like the
memory DPM clocks that are exposed by pp_dpm_mclk.
It's not intuitive that they are reversed on these APUs. All tools
and software that talks to the driver then has to know different ways
to interpret the data depending on the asic.
So we need to reverse them to expose the clocks levels from the
driver consistently.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This patch reverses the DPM clocks levels output of pp_dpm_mclk
and pp_dpm_fclk.
On dGPUs and older APUs we expose the levels from lowest clocks
to highest clocks. But for some APUs, the clocks levels that from
the DFPstateTable are given the reversed orders by PMFW. Like the
memory DPM clocks that are exposed by pp_dpm_mclk.
It's not intuitive that they are reversed on these APUs. All tools
and software that talks to the driver then has to know different ways
to interpret the data depending on the asic.
So we need to reverse them to expose the clocks levels from the
driver consistently.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This patch reverses the DPM clocks levels output of pp_dpm_mclk.
On dGPUs and older APUs we expose the levels from lowest clocks
to highest clocks. But for some APUs, the clocks levels that from
the DFPstateTable are given the reversed orders by PMFW. Like the
memory DPM clocks that are exposed by pp_dpm_mclk.
It's not intuitive that they are reversed on these APUs. All tools
and software that talks to the driver then has to know different ways
to interpret the data depending on the asic.
So we need to reverse them to expose the clocks levels from the
driver consistently.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This patch reverses the DPM clocks levels output of pp_dpm_mclk
and pp_dpm_fclk.
On dGPUs and older APUs we expose the levels from lowest clocks
to highest clocks. But for some APUs, the clocks levels that from
the DFPstateTable are given the reversed orders by PMFW. Like the
memory DPM clocks that are exposed by pp_dpm_mclk.
It's not intuitive that they are reversed on these APUs. All tools
and software that talks to the driver then has to know different ways
to interpret the data depending on the asic.
So we need to reverse them to expose the clocks levels from the
driver consistently.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
No functional changes but we can remove some unsightly index computation
and read/write functions if we convert the PMU sample array from a
one-dimensional to a two-dimensional array.
v2: Retain read/store helpers (Tvrtko)
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230524215629.97920-3-ashutosh.dixit@intel.com
pmu_needs_timer() keeps the timer running even when GT is parked,
ostensibly to sample requested/actual frequencies. However
frequency_sample() has the following:
/* Report 0/0 (actual/requested) frequency while parked. */
if (!intel_gt_pm_get_if_awake(gt))
return;
The above code prevents frequencies to be sampled while the GT is
parked. So we might as well turn off the sampling timer itself in this
case and save CPU cycles/power.
v2: Instead of turning freq bits off, return false, since no counters will
run after this change when GT is parked (Tvrtko)
v3: Remove gpu_active argument of pmu_needs_timer (Andrzej)
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230524215629.97920-2-ashutosh.dixit@intel.com
Clearing out report id and timestamp as means to detect unlanded reports
only works if report size is power of 2. That is, only when report size is
a sub-multiple of the OA buffer size can we be certain that reports will
land at the same place each time in the OA buffer (after rewind). If report
size is not a power of 2, we need to zero out the entire report to be able
to detect unlanded reports reliably.
v2: Add Fixes tag (Umesh)
Fixes: 1cc064dce4 ("drm/i915/perf: Add support for OA media units")
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230523204042.4180641-1-ashutosh.dixit@intel.com
The arch_get_vdso_data() function is defined separately on each architecture,
but only called when CONFIG_TIME_NS is set. If the definition is a global
function, this causes a W=1 warning without TIME_NS:
arch/x86/entry/vdso/vma.c:35:19: error: no previous prototype for 'arch_get_vdso_data' [-Werror=missing-prototypes]
Move the prototype out of the #ifdef block to reliably turn off that
warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230517131102.934196-15-arnd@kernel.org
Until commit 5c2712387d ("cacheinfo: Fix LLC is not exported through
sysfs"), cacheinfo called populate_cache_leaves() for CPU coming online
which let the arch specific functions handle (at least on x86)
populating the shared_cpu_map. However, with the changes in the
aforementioned commit, populate_cache_leaves() is not called when a CPU
comes online as a result of hotplug since last_level_cache_is_valid()
returns true as the cacheinfo data is not discarded. The CPU coming
online is not present in shared_cpu_map, however, it will not be added
since the cpu_cacheinfo->cpu_map_populated flag is set (it is set in
populate_cache_leaves() when cacheinfo is first populated for x86)
This can lead to inconsistencies in the shared_cpu_map when an offlined
CPU comes online again. Example below depicts the inconsistency in the
shared_cpu_list in cacheinfo when CPU8 is offlined and onlined again on
a 3rd Generation EPYC processor:
# for i in /sys/devices/system/cpu/cpu8/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
/sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list: 8-15,136-143
# echo 0 > /sys/devices/system/cpu/cpu8/online
# echo 1 > /sys/devices/system/cpu/cpu8/online
# for i in /sys/devices/system/cpu/cpu8/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
/sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list: 8
/sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list: 8
/sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list: 8
/sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list: 8
# cat /sys/devices/system/cpu/cpu136/cache/index0/shared_cpu_list
136
# cat /sys/devices/system/cpu/cpu136/cache/index3/shared_cpu_list
9-15,136-143
Clear the flag when the CPU is removed from shared_cpu_map when
cache_shared_cpu_map_remove() is called during CPU hotplug. This will
allow cache_shared_cpu_map_setup() to add the CPU coming back online in
the shared_cpu_map. Set the flag again when the shared_cpu_map is setup.
Following are results of performing the same test as described above with
the changes:
# for i in /sys/devices/system/cpu/cpu8/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
/sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list: 8-15,136-143
# echo 0 > /sys/devices/system/cpu/cpu8/online
# echo 1 > /sys/devices/system/cpu/cpu8/online
# for i in /sys/devices/system/cpu/cpu8/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
/sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list: 8-15,136-143
# cat /sys/devices/system/cpu/cpu136/cache/index0/shared_cpu_list
8,136
# cat /sys/devices/system/cpu/cpu136/cache/index3/shared_cpu_list
8-15,136-143
Fixes: 5c2712387d ("cacheinfo: Fix LLC is not exported through sysfs")
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20230508084115.1157-3-kprateek.nayak@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While building the shared_cpu_map, check if the cache level and cache
type matches. On certain systems that build the cache topology based on
the instance ID, there are cases where the same ID may repeat across
multiple cache levels, leading inaccurate topology.
In event of CPU offlining, the cache_shared_cpu_map_remove() does not
consider if IDs at same level are being compared. As a result, when same
IDs repeat across different cache levels, the CPU going offline is not
removed from all the shared_cpu_map.
Below is the output of cache topology of CPU8 and it's SMT sibling after
CPU8 is offlined on a dual socket 3rd Generation AMD EPYC processor
(2 x 64C/128T) running kernel release v6.3:
# for i in /sys/devices/system/cpu/cpu8/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
/sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list: 8-15,136-143
# echo 0 > /sys/devices/system/cpu/cpu8/online
# for i in /sys/devices/system/cpu/cpu136/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
/sys/devices/system/cpu/cpu136/cache/index0/shared_cpu_list: 136
/sys/devices/system/cpu/cpu136/cache/index1/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu136/cache/index2/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu136/cache/index3/shared_cpu_list: 9-15,136-143
CPU8 is removed from index0 (L1i) but remains in the shared_cpu_list of
index1 (L1d) and index2 (L2). Since L1i, L1d, and L2 are shared by the
SMT siblings, and they have the same cache instance ID, CPU 2 is only
removed from the first index with matching ID which is index1 (L1i) in
this case. With this fix, the results are as expected when performing
the same experiment on the same system:
# for i in /sys/devices/system/cpu/cpu8/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
/sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list: 8-15,136-143
# echo 0 > /sys/devices/system/cpu/cpu8/online
# for i in /sys/devices/system/cpu/cpu136/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
/sys/devices/system/cpu/cpu136/cache/index0/shared_cpu_list: 136
/sys/devices/system/cpu/cpu136/cache/index1/shared_cpu_list: 136
/sys/devices/system/cpu/cpu136/cache/index2/shared_cpu_list: 136
/sys/devices/system/cpu/cpu136/cache/index3/shared_cpu_list: 9-15,136-143
When rebuilding topology, the same problem appears as
cache_shared_cpu_map_setup() implements a similar logic. Consider the
same 3rd Generation EPYC processor: CPUs in Core 1, that share the L1
and L2 caches, have L1 and L2 instance ID as 1. For all the CPUs on
the second chiplet, the L3 ID is also 1 leading to grouping on CPUs from
Core 1 (1, 17) and the entire second chiplet (8-15, 24-31) as CPUs
sharing one cache domain. This went undetected since x86 processors
depended on arch specific populate_cache_leaves() method to repopulate
the shared_cpus_map when CPU came back online until kernel release
v6.3-rc5.
Fixes: 198102c910 ("cacheinfo: Fix shared_cpu_map to handle shared caches at different levels")
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20230508084115.1157-2-kprateek.nayak@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current code will, if we do not specify unique labels
for the SRAM subnodes, fail to register several nodes named
the same.
Example:
sram@40020000 {
(...)
sram@0 {
(...)
};
sram@1000 {
(...)
};
};
Since the child->name in both cases will be "sram" the
gen_pool_create() will fail because the name is not unique.
Use dev_name() for the device as this will have bus ID
set to the fully translated address for the node, and that
will always be unique.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230417-ux500-sram-v2-2-6e62ad551faa@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds an SoC-specific binding for the banks of eSRAM
available in the ST-Ericsson U8500.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230417-ux500-sram-v2-1-6e62ad551faa@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>