Commit graph

1,215,304 commits

Author SHA1 Message Date
Christian Marangi
6352f25f9f leds: trigger: netdev: add basic check for hw control support
Add basic check for hw control support. Check if the required API are
defined and check if the defined trigger supported in hw control for the
LED driver match netdev.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-31 09:42:08 +01:00
Christian Marangi
4fd1b6d47a leds: trigger: netdev: introduce check for possible hw control
Introduce function to check if the requested mode can use hw control in
preparation for hw control support. Currently everything is handled in
software so can_hw_control will always return false.

Add knob with the new value hw_control in trigger_data struct to
set hw control possible. Useful for future implementation to implement
in set_baseline_state() the required function to set the requested mode
using LEDs hw control ops and in other function to reject set if hw
control is currently active.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-31 09:42:08 +01:00
Andrew Lunn
28a6a2ef18 leds: trigger: netdev: refactor code setting device name
Move the code into a helper, ready for it to be called at
other times. No intended behaviour change.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-31 09:42:08 +01:00
Christian Marangi
8aa2fd7b66 Documentation: leds: leds-class: Document new Hardware driven LEDs APIs
Document new Hardware driven LEDs APIs.

Some LEDs can be programmed to be driven by hardware. This is not
limited to blink but also to turn off or on autonomously.
To support this feature, a LED needs to implement various additional
ops and needs to declare specific support for the supported triggers.

Add documentation for each required value and API to make hw control
possible and implementable by both LEDs and triggers.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-31 09:42:08 +01:00
Andrew Lunn
052c38eb17 leds: add API to get attached device for LED hw control
Some specific LED triggers blink the LED based on events from a device
or subsystem.
For example, an LED could be blinked to indicate a network device is
receiving packets, or a disk is reading blocks. To correctly enable and
request the hw control of the LED, the trigger has to check if the
network interface or block device configured via a /sys/class/led file
match the one the LED driver provide for hw control for.

Provide an API call to get the device which the LED blinks for.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-31 09:42:08 +01:00
Christian Marangi
ed554d3f94 leds: add APIs for LEDs hw control
Add an option to permit LED driver to declare support for a specific
trigger to use hw control and setup the LED to blink based on specific
provided modes.

Add APIs for LEDs hw control. These functions will be used to activate
hardware control where a LED will use the provided flags, from an
unique defined supported trigger, to setup the LED to be driven by
hardware.

Add hw_control_is_supported() to ask the LED driver if the requested
mode by the trigger are supported and the LED can be setup to follow
the requested modes.

Deactivate hardware blink control by setting brightness to LED_OFF via
the brightness_set() callback.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-31 09:42:08 +01:00
Peter Zijlstra
df25edbac3 x86/alternatives: Add longer 64-bit NOPs
By adding support for longer NOPs there are a few more alternatives
that can turn into a single instruction.

Add up to NOP11, the same limit where GNU as .nops also stops
generating longer nops. This is because a number of uarchs have severe
decode penalties for more than 3 prefixes.

  [ bp: Sync up with the version in tools/ while at it. ]

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230515093020.661756940@infradead.org
2023-05-31 10:21:21 +02:00
Mika Westerberg
9f9666e653 thunderbolt: Mask ring interrupt on Intel hardware as well
When resuming from system sleep states the driver issues following
warning on Intel hardware:

  thunderbolt 0000:07:00.0: interrupt for TX ring 0 is already enabled

The reason for this is that the commit in question did not mask the ring
interrupt on Intel hardware leaving the interrupt active. Fix this by
masking it also in Intel hardware.

Reported-by: beld zhang <beldzhang@gmail.com>
Tested-by: beld zhang <beldzhang@gmail.com>
Closes: https://lore.kernel.org/linux-usb/ZHKW5NeabmfhgLbY@debian.me/
Fixes: c4af8e3fec ("thunderbolt: Clear registers properly when auto clear isn't in use")
Cc: stable@vger.kernel.org
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-05-31 10:37:21 +03:00
Pedro Tammela
f4e4534850 net/netlink: fix NETLINK_LIST_MEMBERSHIPS length report
The current code for the length calculation wrongly truncates the reported
length of the groups array, causing an under report of the subscribed
groups. To fix this, use 'BITS_TO_BYTES()' which rounds up the
division by 8.

Fixes: b42be38b27 ("netlink: add API to retrieve all group memberships")
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230529153335.389815-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-31 00:02:24 -07:00
Oliver Upton
f6a27d6dc5 KVM: arm64: Drop last page ref in kvm_pgtable_stage2_free_removed()
The reference count on page table allocations is increased for every
'counted' PTE (valid or donated) in the table in addition to the initial
reference from ->zalloc_page(). kvm_pgtable_stage2_free_removed() fails
to drop the last reference on the root of the table walk, meaning we
leak memory.

Fix it by dropping the last reference after the free walker returns,
at which point all references for 'counted' PTEs have been released.

Cc: stable@vger.kernel.org
Fixes: 5c359cca1f ("KVM: arm64: Tear down unlinked stage-2 subtree after break-before-make")
Reported-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Tested-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230530193213.1663411-1-oliver.upton@linux.dev
2023-05-31 08:02:21 +01:00
Xin Long
6cd8ec58c1 tipc: delete tipc_mtu_bad from tipc_udp_enable
Since commit a4dfa72d0a ("tipc: set default MTU for UDP media"), it's
been no longer using dev->mtu for b->mtu, and the issue described in
commit 3de81b7588 ("tipc: check minimum bearer MTU") doesn't exist
in UDP bearer any more.

Besides, dev->mtu can still be changed to a too small mtu after the UDP
bearer is created even with tipc_mtu_bad() check in tipc_udp_enable().
Note that NETDEV_CHANGEMTU event processing in tipc_l2_device_event()
doesn't really work for UDP bearer.

So this patch deletes the unnecessary tipc_mtu_bad from tipc_udp_enable.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Link: https://lore.kernel.org/r/282f1f5cc40e6cad385aa1c60569e6c5b70e2fb3.1685371933.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-31 00:01:11 -07:00
Jakub Kicinski
c23515ad4e Merge branch 'net-dsa-mv88e6xxx-add-88e6361-support'
Alexis Lothoré says:

====================
net: dsa: mv88e6xxx: add 88E6361 support

This series brings initial support for Marvell 88E6361 switch.

MV88E6361 is a 8 ports switch with 5 integrated Gigabit PHYs and 3
2.5Gigabit SerDes interfaces. It is in fact a new variant in the
88E639X/88E6193X/88E6191X family with a subset of existing features:
- port 0: MII, RMII, RGMII, 1000BaseX, 2500BaseX
- port 3 to 7: triple speed internal phys
- port 9 and 10: 1000BaseX, 25000BaseX

Since said family is already well supported in mv88e6xxx driver, adding
initial support for this new switch mostly consists in finding the ID
exposed in its identification register, adding a proper description
in switch description tables in mv88e6xxx driver, and enforcing 88E6361
specificities in mv88e6393x_XXX methods.

- first 4 commits introduce an internal phy offset field for switches which
  have internal phys but not starting from port 0
- 5th commit is a fix on existing switches based on first commits
- 6th commit is a slight modification to prepare 886361 support
- last commit introduces 88E6361 support in 88E6393X family

This initial support has been tested with two samples of a custom board
with the following hardware configuration:
- a main CPU connected to MV88E6361 using port 0 as CPU port
- port 9 wired to a SFP cage
- port 10 wired to a G.Hn transceiver

The following setup was used:
PC <-ethernet-> (copper SFP) - Board 1 - (G.hn) <-phone line(RJ11)-> (G.hn) Board 2

The unit 1 has been configured to bridge SFP port and G.hn port together,
which allowed to successfully ping Board 2 from PC.
====================

Link: https://lore.kernel.org/r/20230529080246.82953-1-alexis.lothore@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:54:35 -07:00
Alexis Lothoré
12899f2998 net: dsa: mv88e6xxx: enable support for 88E6361 switch
Marvell 88E6361 is an 8-port switch derived from the
88E6393X/88E9193X/88E6191X switches family. It can benefit from the
existing mv88e6xxx driver by simply adding the proper switch description in
the driver. Main differences with other switches from this
family are:
- 8 ports exposed (instead of 11): ports 1, 2 and 8 not available
- No 5GBase-x nor SFI/USXGMII support

Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:54:33 -07:00
Alexis Lothoré
18e1b7422d net: dsa: mv88e6xxx: pass mv88e6xxx_chip structure to port_max_speed_mode
Some switches families have minor differences on supported link speed for
ports. Instead of redefining a new port_max_speed_mode for each different
configuration, allow to pass mv88e6xxx_chip structure to allow
differentiating those chips by known chip id

Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:54:33 -07:00
Alexis Lothoré
2f93493970 net: dsa: mv88e6xxx: fix 88E6393X family internal phys layout
88E6393X/88E6193X/88E6191X switches have in fact 8 internal PHYs, but those
are not present starting at port 0: supported ports go from 1 to 8

Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:54:33 -07:00
Alexis Lothoré
3ba89b28ad net: dsa: mv88e6xxx: add field to specify internal phys layout
mv88e6xxx currently assumes that switch equipped with internal phys have
those phys mapped contiguously starting from port 0 (see
mv88e6xxx_phy_is_internal). However, some switches have internal PHYs but
NOT starting from port 0. For example 88e6393X, 88E6193X and 88E6191X have
integrated PHYs available on ports 1 to 8
To properly support this offset, add a new field to allow specifying an
internal PHYs layout. If field is not set, default layout is assumed (start
at port 0)

Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:54:33 -07:00
Alexis Lothoré
7a2dd00be8 net: dsa: mv88e6xxx: use mv88e6xxx_phy_is_internal in mv88e6xxx_port_ppu_updates
Make sure to use existing helper to get internal PHYs count instead of
redoing it manually

Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:54:33 -07:00
Alexis Lothoré
ca34593190 net: dsa: mv88e6xxx: pass directly chip structure to mv88e6xxx_phy_is_internal
Since this function is a simple helper, we do not need to pass a full
dsa_switch structure, we can directly pass the mv88e6xxx_chip structure.
Doing so will allow to share this function with any other function
not manipulating dsa_switch structure but needing info about number of
internal phys

Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:54:33 -07:00
Alexis Lothoré
9229a9483d dt-bindings: net: dsa: marvell: add MV88E6361 switch to compatibility list
Marvell MV88E6361 is an 8-port switch derived from the
88E6393X/88E9193X/88E6191X switches family. Since its functional behavior
is very close to switches from this family, it can benefit from existing
drivers for this family, so add it to the list of compatible switches

Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:54:33 -07:00
Jakub Kicinski
e180a33cf4 Merge branch 'add-layer-2-miss-indication-and-filtering'
Ido Schimmel says:

====================
Add layer 2 miss indication and filtering

tl;dr
=====

This patchset adds a single bit to the tc skb extension to indicate that
a packet encountered a layer 2 miss in the bridge and extends flower to
match on this metadata. This is required for non-DF (Designated
Forwarder) filtering in EVPN multi-homing which prevents decapsulated
BUM packets from being forwarded multiple times to the same multi-homed
host.

Background
==========

In a typical EVPN multi-homing setup each host is multi-homed using a
set of links called ES (Ethernet Segment, i.e., LAG) to multiple leaf
switches in a rack. These switches act as VTEPs and are not directly
connected (as opposed to MLAG), but can communicate with each other (as
well as with VTEPs in remote racks) via spine switches over L3.

When a host sends a BUM packet over ES1 to VTEP1, the VTEP will flood it
to other VTEPs in the network, including those connected to the host
over ES1. The receiving VTEPs must drop the packet and not forward it
back to the host. This is called "split-horizon filtering" (SPH) [1].

FRR configures SPH filtering using two tc filters. The first, an ingress
filter that matches on packets received from VTEP1 and marks them using
a fwmark (firewall mark). The second, an egress filter configured on the
LAG interface connected to the host that matches on the fwmark and drops
the packets. Example:

 # tc filter add dev vxlan0 ingress pref 1 proto all flower enc_src_ip $VTEP1_IP action skbedit mark 101
 # tc filter add dev bond0 egress pref 1 handle 101 fw action drop

Motivation
==========

For each ES, only one VTEP is elected by the control plane as the DF.
The DF is responsible for forwarding decapsulated BUM traffic to the
host over the ES. The non-DF VTEPs must drop such traffic as otherwise
the host will receive multiple copies of BUM traffic. This is called
"non-DF filtering" [2].

Filtering of multicast and broadcast traffic can be achieved using the
following flower filter:

 # tc filter add dev bond0 egress pref 1 proto all flower indev vxlan0 dst_mac 01:00:00:00:00:00/01:00:00:00:00:00 action drop

Unlike broadcast and multicast traffic, it is not currently possible to
filter unknown unicast traffic. The classification into unknown unicast
is performed by the bridge driver, but is not visible to other layers.

Implementation
==============

The proposed solution is to add a single bit to the tc skb extension
that is set by the bridge for packets that encountered an FDB or MDB
miss. The flower classifier is extended to be able to match on this new
metadata bit in a similar fashion to existing metadata options such as
'indev'.

A bit that is set for every flooded packet would also work, but it does
not allow us to differentiate between registered and unregistered
multicast traffic which might be useful in the future.

A relatively generic name is chosen for this bit - 'l2_miss' - to allow
its use to be extended to other layer 2 devices such as VXLAN, should a
use case arise.

With the above, the control plane can implement a non-DF filter using
the following tc filters:

 # tc filter add dev bond0 egress pref 1 proto all flower indev vxlan0 dst_mac 01:00:00:00:00:00/01:00:00:00:00:00 action drop
 # tc filter add dev bond0 egress pref 2 proto all flower indev vxlan0 l2_miss true action drop

The first drops broadcast and multicast traffic and the second drops
unknown unicast traffic.

Testing
=======

A test exercising the different permutations of the 'l2_miss' bit is
added in patch #8.

Patchset overview
=================

Patch #1 adds the new bit to the tc skb extension and sets it in the
bridge driver for packets that encountered a miss. The marking of the
packets and the use of this extension is protected by the
'tc_skb_ext_tc' static key in order to keep performance impact to a
minimum when the feature is not in use.

Patch #2 extends the flow dissector to dissect this information from the
tc skb extension into the 'FLOW_DISSECTOR_KEY_META' key.

Patch #3 extends the flower classifier to be able to match on the new
layer 2 miss metadata. The classifier enables the 'tc_skb_ext_tc' static
key upon the installation of the first filter that matches on 'l2_miss'
and disables the key upon the removal of the last filter that matches on
it.

Patch #4 rejects matching on the new metadata in drivers that already
support the 'FLOW_DISSECTOR_KEY_META' key.

Patches #5-#6 are small preparations in mlxsw.

Patch #7 extends mlxsw to be able to match on layer 2 miss.

Patch #8 adds a selftest.

iproute2 patches can be found here [3].

[1] https://datatracker.ietf.org/doc/html/rfc7432#section-8.3
[2] https://datatracker.ietf.org/doc/html/rfc7432#section-8.5
[3] https://github.com/idosch/iproute2/tree/submit/non_df_filter_v1
[4] https://lore.kernel.org/netdev/20230518113328.1952135-1-idosch@nvidia.com/
[5] https://lore.kernel.org/netdev/20230509070446.246088-1-idosch@nvidia.com/
====================

Link: https://lore.kernel.org/r/20230529114835.372140-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:37:02 -07:00
Ido Schimmel
8c33266ae2 selftests: forwarding: Add layer 2 miss test cases
Add test cases to verify that the bridge driver correctly marks layer 2
misses only when it should and that the flower classifier can match on
this metadata.

Example output:

 # ./tc_flower_l2_miss.sh
 TEST: L2 miss - Unicast                                             [ OK ]
 TEST: L2 miss - Multicast (IPv4)                                    [ OK ]
 TEST: L2 miss - Multicast (IPv6)                                    [ OK ]
 TEST: L2 miss - Link-local multicast (IPv4)                         [ OK ]
 TEST: L2 miss - Link-local multicast (IPv6)                         [ OK ]
 TEST: L2 miss - Broadcast                                           [ OK ]

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:37:01 -07:00
Ido Schimmel
caa4c58ab5 mlxsw: spectrum_flower: Add ability to match on layer 2 miss
Add the 'fdb_miss' key element to supported key blocks and make use of
it to match on layer 2 miss.

The key is only supported on Spectrum-{2,3,4}. An error is returned for
Spectrum-1 since the key element is not present in any of its key
blocks.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:37:00 -07:00
Ido Schimmel
0b9cd74b8d mlxsw: spectrum_flower: Do not force matching on iif
Currently, mlxsw only supports the 'ingress_ifindex' field in the
'FLOW_DISSECTOR_KEY_META' key, but subsequent patches are going to add
support for the 'l2_miss' field as well. It is valid to only match on
'l2_miss' without 'ingress_ifindex', so do not force matching on it.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:37:00 -07:00
Ido Schimmel
d04e265096 mlxsw: spectrum_flower: Split iif parsing to a separate function
Currently, mlxsw only supports the 'ingress_ifindex' field in the
'FLOW_DISSECTOR_KEY_META' key, but subsequent patches are going to add
support for the 'l2_miss' field as well. Split the parsing of the
'ingress_ifindex' field to a separate function to avoid nesting. No
functional changes intended.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:37:00 -07:00
Ido Schimmel
f4356947f0 flow_offload: Reject matching on layer 2 miss
Adjust drivers that support the 'FLOW_DISSECTOR_KEY_META' key to reject
filters that try to match on the newly added layer 2 miss field. Add an
extack message to clearly communicate the failure reason to user space.

The following users were not patched:

1. mtk_flow_offload_replace(): Only checks that the key is present, but
   does not do anything with it.
2. mlx5_tc_ct_set_tuple_match(): Used as part of netfilter offload,
   which does not make use of the new field, unlike tc.
3. get_netdev_from_rule() in nfp: Likewise.

Example:

 # tc filter add dev swp1 egress pref 1 proto all flower skip_sw l2_miss true action drop
 Error: mlxsw_spectrum: Can't match on "l2_miss".
 We have an error talking to the kernel

Acked-by: Elad Nachman <enachman@marvell.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:37:00 -07:00
Ido Schimmel
1a432018c0 net/sched: flower: Allow matching on layer 2 miss
Add the 'TCA_FLOWER_L2_MISS' netlink attribute that allows user space to
match on packets that encountered a layer 2 miss. The miss indication is
set as metadata in the tc skb extension by the bridge driver upon FDB or
MDB lookup miss and dissected by the flow dissector to the
'FLOW_DISSECTOR_KEY_META' key.

The use of this skb extension is guarded by the 'tc_skb_ext_tc' static
key. As such, enable / disable this key when filters that match on layer
2 miss are added / deleted.

Tested:

 # cat tc_skb_ext_tc.py
 #!/usr/bin/env -S drgn -s vmlinux

 refcount = prog["tc_skb_ext_tc"].key.enabled.counter.value_()
 print(f"tc_skb_ext_tc reference count is {refcount}")

 # ./tc_skb_ext_tc.py
 tc_skb_ext_tc reference count is 0

 # tc filter add dev swp1 egress proto all handle 101 pref 1 flower src_mac 00:11:22:33:44:55 action drop
 # tc filter add dev swp1 egress proto all handle 102 pref 2 flower src_mac 00:11:22:33:44:55 l2_miss true action drop
 # tc filter add dev swp1 egress proto all handle 103 pref 3 flower src_mac 00:11:22:33:44:55 l2_miss false action drop

 # ./tc_skb_ext_tc.py
 tc_skb_ext_tc reference count is 2

 # tc filter replace dev swp1 egress proto all handle 102 pref 2 flower src_mac 00:01:02:03:04:05 l2_miss false action drop

 # ./tc_skb_ext_tc.py
 tc_skb_ext_tc reference count is 2

 # tc filter del dev swp1 egress proto all handle 103 pref 3 flower
 # tc filter del dev swp1 egress proto all handle 102 pref 2 flower
 # tc filter del dev swp1 egress proto all handle 101 pref 1 flower

 # ./tc_skb_ext_tc.py
 tc_skb_ext_tc reference count is 0

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:37:00 -07:00
Ido Schimmel
d5ccfd90df flow_dissector: Dissect layer 2 miss from tc skb extension
Extend the 'FLOW_DISSECTOR_KEY_META' key with a new 'l2_miss' field and
populate it from a field with the same name in the tc skb extension.
This field is set by the bridge driver for packets that incur an FDB or
MDB miss.

The next patch will extend the flower classifier to be able to match on
layer 2 misses.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:37:00 -07:00
Ido Schimmel
7b4858df3b skbuff: bridge: Add layer 2 miss indication
For EVPN non-DF (Designated Forwarder) filtering we need to be able to
prevent decapsulated traffic from being flooded to a multi-homed host.
Filtering of multicast and broadcast traffic can be achieved using the
following flower filter:

 # tc filter add dev bond0 egress pref 1 proto all flower indev vxlan0 dst_mac 01:00:00:00:00:00/01:00:00:00:00:00 action drop

Unlike broadcast and multicast traffic, it is not currently possible to
filter unknown unicast traffic. The classification into unknown unicast
is performed by the bridge driver, but is not visible to other layers
such as tc.

Solve this by adding a new 'l2_miss' bit to the tc skb extension. Clear
the bit whenever a packet enters the bridge (received from a bridge port
or transmitted via the bridge) and set it if the packet did not match an
FDB or MDB entry. If there is no skb extension and the bit needs to be
cleared, then do not allocate one as no extension is equivalent to the
bit being cleared. The bit is not set for broadcast packets as they
never perform a lookup and therefore never incur a miss.

A bit that is set for every flooded packet would also work for the
current use case, but it does not allow us to differentiate between
registered and unregistered multicast traffic, which might be useful in
the future.

To keep the performance impact to a minimum, the marking of packets is
guarded by the 'tc_skb_ext_tc' static key. When 'false', the skb is not
touched and an skb extension is not allocated. Instead, only a
5 bytes nop is executed, as demonstrated below for the call site in
br_handle_frame().

Before the patch:

```
        memset(skb->cb, 0, sizeof(struct br_input_skb_cb));
  c37b09:       49 c7 44 24 28 00 00    movq   $0x0,0x28(%r12)
  c37b10:       00 00

        p = br_port_get_rcu(skb->dev);
  c37b12:       49 8b 44 24 10          mov    0x10(%r12),%rax
        memset(skb->cb, 0, sizeof(struct br_input_skb_cb));
  c37b17:       49 c7 44 24 30 00 00    movq   $0x0,0x30(%r12)
  c37b1e:       00 00
  c37b20:       49 c7 44 24 38 00 00    movq   $0x0,0x38(%r12)
  c37b27:       00 00
```

After the patch (when static key is disabled):

```
        memset(skb->cb, 0, sizeof(struct br_input_skb_cb));
  c37c29:       49 c7 44 24 28 00 00    movq   $0x0,0x28(%r12)
  c37c30:       00 00
  c37c32:       49 8d 44 24 28          lea    0x28(%r12),%rax
  c37c37:       48 c7 40 08 00 00 00    movq   $0x0,0x8(%rax)
  c37c3e:       00
  c37c3f:       48 c7 40 10 00 00 00    movq   $0x0,0x10(%rax)
  c37c46:       00

#ifdef CONFIG_HAVE_JUMP_LABEL_HACK

static __always_inline bool arch_static_branch(struct static_key *key, bool branch)
{
        asm_volatile_goto("1:"
  c37c47:       0f 1f 44 00 00          nopl   0x0(%rax,%rax,1)
        br_tc_skb_miss_set(skb, false);

        p = br_port_get_rcu(skb->dev);
  c37c4c:       49 8b 44 24 10          mov    0x10(%r12),%rax
```

Subsequent patches will extend the flower classifier to be able to match
on the new 'l2_miss' bit and enable / disable the static key when
filters that match on it are added / deleted.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:37:00 -07:00
Zhengchao Shao
36eec020fa net: sched: fix NULL pointer dereference in mq_attach
When use the following command to test:
1)ip link add bond0 type bond
2)ip link set bond0 up
3)tc qdisc add dev bond0 root handle ffff: mq
4)tc qdisc replace dev bond0 parent ffff:fff1 handle ffff: mq

The kernel reports NULL pointer dereference issue. The stack information
is as follows:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Internal error: Oops: 0000000096000006 [#1] SMP
Modules linked in:
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mq_attach+0x44/0xa0
lr : qdisc_graft+0x20c/0x5cc
sp : ffff80000e2236a0
x29: ffff80000e2236a0 x28: ffff0000c0e59d80 x27: ffff0000c0be19c0
x26: ffff0000cae3e800 x25: 0000000000000010 x24: 00000000fffffff1
x23: 0000000000000000 x22: ffff0000cae3e800 x21: ffff0000c9df4000
x20: ffff0000c9df4000 x19: 0000000000000000 x18: ffff80000a934000
x17: ffff8000f5b56000 x16: ffff80000bb08000 x15: 0000000000000000
x14: 0000000000000000 x13: 6b6b6b6b6b6b6b6b x12: 6b6b6b6b00000001
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : ffff0000c0be0730 x7 : bbbbbbbbbbbbbbbb x6 : 0000000000000008
x5 : ffff0000cae3e864 x4 : 0000000000000000 x3 : 0000000000000001
x2 : 0000000000000001 x1 : ffff8000090bc23c x0 : 0000000000000000
Call trace:
mq_attach+0x44/0xa0
qdisc_graft+0x20c/0x5cc
tc_modify_qdisc+0x1c4/0x664
rtnetlink_rcv_msg+0x354/0x440
netlink_rcv_skb+0x64/0x144
rtnetlink_rcv+0x28/0x34
netlink_unicast+0x1e8/0x2a4
netlink_sendmsg+0x308/0x4a0
sock_sendmsg+0x64/0xac
____sys_sendmsg+0x29c/0x358
___sys_sendmsg+0x90/0xd0
__sys_sendmsg+0x7c/0xd0
__arm64_sys_sendmsg+0x2c/0x38
invoke_syscall+0x54/0x114
el0_svc_common.constprop.1+0x90/0x174
do_el0_svc+0x3c/0xb0
el0_svc+0x24/0xec
el0t_64_sync_handler+0x90/0xb4
el0t_64_sync+0x174/0x178

This is because when mq is added for the first time, qdiscs in mq is set
to NULL in mq_attach(). Therefore, when replacing mq after adding mq, we
need to initialize qdiscs in the mq before continuing to graft. Otherwise,
it will couse NULL pointer dereference issue in mq_attach(). And the same
issue will occur in the attach functions of mqprio, taprio and htb.
ffff:fff1 means that the repalce qdisc is ingress. Ingress does not allow
any qdisc to be attached. Therefore, ffff:fff1 is incorrectly used, and
the command should be dropped.

Fixes: 6ec1c69a8f ("net_sched: add classful multiqueue dummy scheduler")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Tested-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20230527093747.3583502-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:31:40 -07:00
Jakub Kicinski
bb50f12c69 Merge branch 'net-sched-fixes-for-sch_ingress-and-sch_clsact'
Peilin Ye says:

====================
net/sched: Fixes for sch_ingress and sch_clsact

These are v6 fixes for ingress and clsact Qdiscs, including only first 4
patches (already tested and reviewed) from v5.  Patch 5 and 6 from
previous versions are still under discussion and will be sent separately.

[a] https://syzkaller.appspot.com/bug?extid=b53a9c0d1ea4ad62da8b

Link to v5: https://lore.kernel.org/r/cover.1684887977.git.peilin.ye@bytedance.com/
Link to v4: https://lore.kernel.org/r/cover.1684825171.git.peilin.ye@bytedance.com/
Link to v3 (incomplete): https://lore.kernel.org/r/cover.1684821877.git.peilin.ye@bytedance.com/
Link to v2: https://lore.kernel.org/r/cover.1684796705.git.peilin.ye@bytedance.com/
Link to v1: https://lore.kernel.org/r/cover.1683326865.git.peilin.ye@bytedance.com/
====================

Link: https://lore.kernel.org/r/cover.1685388545.git.peilin.ye@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:31:06 -07:00
Peilin Ye
9de95df5d1 net/sched: Prohibit regrafting ingress or clsact Qdiscs
Currently, after creating an ingress (or clsact) Qdisc and grafting it
under TC_H_INGRESS (TC_H_CLSACT), it is possible to graft it again under
e.g. a TBF Qdisc:

  $ ip link add ifb0 type ifb
  $ tc qdisc add dev ifb0 handle 1: root tbf rate 20kbit buffer 1600 limit 3000
  $ tc qdisc add dev ifb0 clsact
  $ tc qdisc link dev ifb0 handle ffff: parent 1:1
  $ tc qdisc show dev ifb0
  qdisc tbf 1: root refcnt 2 rate 20Kbit burst 1600b lat 560.0ms
  qdisc clsact ffff: parent ffff:fff1 refcnt 2
                                      ^^^^^^^^

clsact's refcount has increased: it is now grafted under both
TC_H_CLSACT and 1:1.

ingress and clsact Qdiscs should only be used under TC_H_INGRESS
(TC_H_CLSACT).  Prohibit regrafting them.

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Fixes: 1f211a1b92 ("net, sched: add clsact qdisc")
Tested-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:31:05 -07:00
Peilin Ye
f85fa45d4a net/sched: Reserve TC_H_INGRESS (TC_H_CLSACT) for ingress (clsact) Qdiscs
Currently it is possible to add e.g. an HTB Qdisc under ffff:fff1
(TC_H_INGRESS, TC_H_CLSACT):

  $ ip link add name ifb0 type ifb
  $ tc qdisc add dev ifb0 parent ffff:fff1 htb
  $ tc qdisc add dev ifb0 clsact
  Error: Exclusivity flag on, cannot modify.
  $ drgn
  ...
  >>> ifb0 = netdev_get_by_name(prog, "ifb0")
  >>> qdisc = ifb0.ingress_queue.qdisc_sleeping
  >>> print(qdisc.ops.id.string_().decode())
  htb
  >>> qdisc.flags.value_() # TCQ_F_INGRESS
  2

Only allow ingress and clsact Qdiscs under ffff:fff1.  Return -EINVAL
for everything else.  Make TCQ_F_INGRESS a static flag of ingress and
clsact Qdiscs.

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Fixes: 1f211a1b92 ("net, sched: add clsact qdisc")
Tested-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:31:05 -07:00
Peilin Ye
5eeebfe6c4 net/sched: sch_clsact: Only create under TC_H_CLSACT
clsact Qdiscs are only supposed to be created under TC_H_CLSACT (which
equals TC_H_INGRESS).  Return -EOPNOTSUPP if 'parent' is not
TC_H_CLSACT.

Fixes: 1f211a1b92 ("net, sched: add clsact qdisc")
Tested-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:31:05 -07:00
Peilin Ye
c7cfbd1150 net/sched: sch_ingress: Only create under TC_H_INGRESS
ingress Qdiscs are only supposed to be created under TC_H_INGRESS.
Return -EOPNOTSUPP if 'parent' is not TC_H_INGRESS, similar to
mq_init().

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: syzbot+b53a9c0d1ea4ad62da8b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/0000000000006cf87705f79acf1a@google.com/
Tested-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:31:04 -07:00
Prathu Baronia
5b4560cf15 arm: omap1: replace printk() with pr_err macro
Use pr_err() macro instead of printk(KERN_ERR "...").

Signed-off-by: Prathu Baronia <quic_pbaronia@quicinc.com>
Message-Id: <20230518103324.881394-1-quic_pbaronia@quicinc.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-05-31 08:31:43 +03:00
Franziska Naepelt
b5b2e006c9 ARM: omap: Fix checkpatch issues
This removes the following checkpatch issues:
- ERROR: space required after that ',' (ctx:VxV)
- WARNING: Comparisons should place the constant on the right side of the test

Signed-off-by: Franziska Naepelt <franziska.naepelt@gmail.com>
Message-Id: <20230530182403.35646-1-franziska.naepelt@gmail.com>
[tony@atomide.com: add space also around '-' in addition to ',']
Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-05-31 08:30:43 +03:00
Andreas Kemnade
445d5be64b ARM: dts: omap4: add initial support for Epson Moverio BT-200
Add the devices working with current drivers for the
Epson Moverio BT-200 AR glasses consisting of a control unit
and the glasses itself.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Message-Id: <20230313110409.2294154-1-andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-05-31 08:23:48 +03:00
Alexander Shiyan
17ff149eee ARM: dts: am335x-myirtech: Add missing NAND wait pin definition
The NAND wait pin is connected to the GPMC, but this is not mentioned
in the DT bindings. Let's fix this.

Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
Message-Id: <20230524091157.775960-1-eagle.alexander923@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-05-31 08:21:02 +03:00
Suraj Kandpal
3e36c49069 drm/i915/hdcp: Rename comp_mutex to hdcp_mutex
Rename comp_mutex to hdcp_mutex as it does not just
protect component related variables which was a terminology
used when hdcp was to be binded as a mei component from MTL
we use gsc cs which does not use the component binding path
for HDCP.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230529110740.1522985-4-suraj.kandpal@intel.com
2023-05-31 10:22:14 +05:30
Suraj Kandpal
5c8ec98799 drm/i915/hdcp: Move away from master naming to arbiter
Rename variables to move away from master convention to
arbiter
%s/hdcp.master/hdcp.arbiter
%s/i915_hdcp_master/i915_hdcp_arbiter
%s/comp_master/comp_arbiter

--v2
- delete i915_hdcp_comp_master redundant declaration [Chaitanya]
- use %s/foo/bar/ format in commit message to show changes [Chaitanya]

--v3
- replace i915_hdcp_comp_master declaration with i915_hdcp_arbiter
to avoid any compile fail with old compilers [Chaitanya]

Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230529110740.1522985-3-suraj.kandpal@intel.com
2023-05-31 10:22:13 +05:30
Suraj Kandpal
401e6cd974 drm/i915/hdcp: Rename dev_priv to i915
Rename dev_priv to i915 to keep up with latest code standards.

Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230529110740.1522985-2-suraj.kandpal@intel.com
2023-05-31 10:22:12 +05:30
Uday Shankar
c7275ce6a5 nvme: improve handling of long keep alives
Upon keep alive completion, nvme_keep_alive_work is scheduled with the
same delay every time. If keep alive commands are completing slowly,
this may cause a keep alive timeout. The following trace illustrates the
issue, taking KATO = 8 and TBKAS off for simplicity:

1. t = 0: run nvme_keep_alive_work, send keep alive
2. t = ε: keep alive reaches controller, controller restarts its keep
          alive timer
3. t = 4: host receives keep alive completion, schedules
          nvme_keep_alive_work with delay 4
4. t = 8: run nvme_keep_alive_work, send keep alive

Here, a keep alive having RTT of 4 causes a delay of at least 8 - ε
between the controller receiving successive keep alives. With ε small,
the controller is likely to detect a keep alive timeout.

Fix this by calculating the RTT of the keep alive command, and adjusting
the scheduling delay of the next keep alive work accordingly.

Reported-by: Costa Sapuntzakis <costa@purestorage.com>
Reported-by: Randy Jennings <randyj@purestorage.com>
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-05-30 20:57:42 -07:00
Stephan Gerhold
b2a2ab039b opp: Fix use-after-free in lazy_opp_tables after probe deferral
When dev_pm_opp_of_find_icc_paths() in _allocate_opp_table() returns
-EPROBE_DEFER, the opp_table is freed again, to wait until all the
interconnect paths are available.

However, if the OPP table is using required-opps then it may already
have been added to the global lazy_opp_tables list. The error path
does not remove the opp_table from the list again.

This can cause crashes later when the provider of the required-opps
is added, since we will iterate over OPP tables that have already been
freed. E.g.:

  Unable to handle kernel NULL pointer dereference when read
  CPU: 0 PID: 7 Comm: kworker/0:0 Not tainted 6.4.0-rc3
  PC is at _of_add_opp_table_v2 (include/linux/of.h:949
  drivers/opp/of.c:98 drivers/opp/of.c:344 drivers/opp/of.c:404
  drivers/opp/of.c:1032) -> lazy_link_required_opp_table()

Fix this by calling _of_clear_opp_table() to remove the opp_table from
the list and clear other allocated resources. While at it, also add the
missing mutex_destroy() calls in the error path.

Cc: stable@vger.kernel.org
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Fixes: 7eba0c7641 ("opp: Allow lazy-linking of required-opps")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-05-31 09:21:41 +05:30
Uwe Kleine-König
72a597aed1 drm/panel-edp: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code.  However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

panel_edp_remove() always returned zero, so convert it to return void
without any loss and then just drop the return from
panel_edp_platform_remove().

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530074216.2195962-1-u.kleine-koenig@pengutronix.de
2023-05-30 19:32:04 -07:00
Uwe Kleine-König
59272ad8d9 bus: fsl-mc: Make remove function return void
The value returned by an fsl-mc driver's remove function is mostly
ignored.  (Only an error message is printed if the value is non-zero
and then device removal continues unconditionally.)

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # sanity checks
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Tested-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2023-05-30 18:58:43 -05:00
Uwe Kleine-König
c27ea8e632 soc: fsl: dpio: Suppress duplicated error reporting on device remove
Returning an error code from a fsl_mc_driver's remove callback results
in a generic error message, otherwise the value is ignored and the device
gets unbound.

As the only error path in dpaa2_dpio_remove() already emits an error
message, return zero unconditionally to suppress another (less helpful)
error report.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # sanity checks
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Tested-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2023-05-30 18:58:43 -05:00
Uwe Kleine-König
b3134039c5 bus: fsl-mc: fsl-mc-allocator: Improve error reporting
Instead of silently returning an error in the remove callback (which yields
a generic and little informing error message), annotate each error path of
fsl_mc_resource_pool_remove_device() with an error message and return zero
in the remove callback to suppress the error message.

Note that changing the return value has no other effect than suppressing
the error message by the fsl_mc bus driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # sanity checks
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Tested-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2023-05-30 18:58:42 -05:00
Uwe Kleine-König
e0ac89361c bus: fsl-mc: fsl-mc-allocator: Drop if block with always wrong condition
If fsl_mc_is_allocatable(mc_dev) evaluates to false, the driver won't
have bound to that device and then fsl_mc_allocator_remove() is never
called for that device. fsl_mc_allocator_remove() is the only caller of
fsl_mc_resource_pool_remove_device(), so the same check can be removed
from there.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # sanity checks
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Tested-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2023-05-30 18:58:42 -05:00
Uwe Kleine-König
f8fce83183 bus: fsl-mc: dprc: Push down error message from fsl_mc_driver_remove()
The error message emitted in fsl_mc_driver_remove() is very generic.
Replace it by a message that mentions the reason for the failure.

Returning zero instead of a negative value has no side effect apart from
suppressing the generic error message.

The first if condition in dprc_remove() can never be true, as this would
prevent successful probing of the device and then .remove wasn't called.
So this can just be dropped.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # sanity checks
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Tested-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2023-05-30 18:58:42 -05:00
Uwe Kleine-König
b816b9444c bus: fsl-mc: Only warn once about errors on device unbind
If a platform driver's remove function returns an error code, this
results in a (generic and little helpful) error message. Otherwise the
value is ignored.

As fsl_mc_driver_remove() already emit an error message, return 0 also
in the error case. The only effect is to suppress the device core's
error message.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # sanity checks
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Tested-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2023-05-30 18:58:42 -05:00