Commit graph

1,215,304 commits

Author SHA1 Message Date
Philipp Zabel
5aa8de7ad1 media: video-mux: fix error paths
Move notifier cleanup into video_mux_async_register() to avoid calling
v4l2_async_nf_unregister() when v4l2_async_subdev_nf_register() failed.
In case video_mux_async_register() fails, call media_entity_cleanup().

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-26 10:57:47 +01:00
Gustavo A. R. Silva
fe1b585ce9 media: pci: cx18-av-vbi: Replace one-element array with flexible-array member
One-element arrays are deprecated, and we are replacing them with flexible
array members instead. So, replace one-element arrays with flexible-array
members in struct vbi_anc_data.

This results in no differences in binary output.

Link: https://github.com/KSPP/linux/issues/79

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-26 10:57:20 +01:00
Artur Weber
bd947783a2 media: Revert "media: exynos4-is: Remove dependency on obsolete SoC support"
Support for the Exynos4212 SoC was originally dropped as there were
no boards using it. We will be adding a device that uses it, so add
it back.

This reverts commit 2d41a0c9ae.

Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-26 10:56:54 +01:00
Uwe Kleine-König
645dec333f media: staging: max96712: Switch i2c driver back to use .probe()
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
commit 03c835f498 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-26 10:56:13 +01:00
Yunfei Dong
962508e31c media: mediatek: vcodec: using empty lat buffer as the last one
Adding one empty lat buffer with parameter 'is_empty_flag = true'
used to flush core work queue decode.

Queue the empty lat buffer to core list when driver need to flush decode.
It's mean core already decode all existed lat buffer when get empty lat
buffer, then wake up core decode done event, the driver will exit when
getting core dec done event.

Fixes: d227af847a ("media: mediatek: vcodec: add core decode done event")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-26 10:55:51 +01:00
Yunfei Dong
297160d411 media: mediatek: vcodec: move core context from device to each instance
There are so many lat buffer in core context list, some instances
maybe be scheduled for a very long time. Moving the core context to
each instance, it only be used to control lat buffer of each instance.
And the core work queue of each instance is scheduled by system.

Fixes: 2cfca6c1bf ("media: mediatek: vcodec: move lat_buf to the top of core list")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-26 10:55:30 +01:00
Yunfei Dong
2864e304fa media: mediatek: vcodec: using decoder status instead of core work count
Adding the definition of decoder status to separate different decoder
period for core hardware.

core_work_cnt is the number of core work queued to work queue, the control
is very complex, leading to some unreasonable test result.

Using parameter status to indicate whether queue core work to work queue.

Fixes: 2e0ef56d81 ("media: mediatek: vcodec: making sure queue_work successfully")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-26 10:54:50 +01:00
Yunfei Dong
15ff9e7f49 media: mediatek: vcodec: Avoid unneeded error logging
Since the LAT decoder works faster than its CORE, getting the trans
buffer may be done only after CORE finishes processing: avoid printing
an error if the decode function returns -EAGAIN, as this means that
the buffer from CORE is not yet available, but will be at a later time.

Also change the log level for calls to vdec_msg_queue_dqbuf() in H264
and VP9 LAT decoder drivers to avoid excessive logging.

Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-26 10:54:22 +01:00
Hans Verkuil
a05e9aabd9 media: staging: media: atomisp: init high & low vars
Fix a compiler warning:

include/linux/dev_printk.h: In function 'ov2680_probe':
include/linux/dev_printk.h:144:31: warning: 'high' may be used uninitialized [-Wmaybe-uninitialized]
  144 |         dev_printk_index_wrap(_dev_err, KERN_ERR, dev, dev_fmt(fmt), ##__VA_ARGS__)
      |                               ^~~~~~~~
In function 'ov2680_detect',
    inlined from 'ov2680_s_config' at drivers/staging/media/atomisp/i2c/atomisp-ov2680.c:468:8,
    inlined from 'ov2680_probe' at drivers/staging/media/atomisp/i2c/atomisp-ov2680.c:647:8:
drivers/staging/media/atomisp/i2c/atomisp-ov2680.c:376:13: note: 'high' was declared here
  376 |         u32 high, low;
      |             ^~~~

'high' is indeed uninitialized after the ov_read_reg8() call failed, so there is no
point showing the value. Just say that the read failed. But low can also be used
uninitialized later, so just make it more robust and properly zero the high and low
variables.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-26 10:52:50 +01:00
Hans Verkuil
73af6c7511 media: cec: core: don't set last_initiator if tx in progress
When a message was received the last_initiator is set to 0xff.
This will force the signal free time for the next transmit
to that for a new initiator. However, if a new transmit is
already in progress, then don't set last_initiator, since
that's the initiator of the current transmit. Overwriting
this would cause the signal free time of a following transmit
to be that of the new initiator instead of a next transmit.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-26 10:52:22 +01:00
Hans Verkuil
fe4526d99e media: cec: core: disable adapter in cec_devnode_unregister
Explicitly disable the CEC adapter in cec_devnode_unregister()

Usually this does not really do anything important, but for drivers
that use the CEC pin framework this is needed to properly stop the
hrtimer. Without this a crash would happen when such a driver is
unloaded with rmmod.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-26 10:52:05 +01:00
Pin-yen Lin
ed17f89e95 media: mediatek: vcodec: Only apply 4K frame sizes on decoder formats
When VCODEC_CAPABILITY_4K_DISABLED is not set in dec_capability, skip
formats that are not MTK_FMT_DEC so only decoder formats is updated in
mtk_init_vdec_params.

Fixes: e25528e1db ("media: mediatek: vcodec: Use 4K frame size when supported by stateful decoder")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-26 10:47:47 +01:00
Yassine Oudjana
76743b29f4 media: camss: camss-video: Don't zero subdev format again after initialization
In an earlier commit, setting the which field of the subdev format struct
in video_get_subdev_format was moved to a designated initializer that also
zeroes all other fields. However, the memset call that was zeroing the
fields earlier was left in place, causing the which field to be cleared
after being set in the initializer.

Remove the memset call from video_get_subdev_format to avoid clearing the
initialized which field.

Fixes: ecefa105cc ("media: Zero-initialize all structures passed to subdev pad operations")
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-26 10:47:30 +01:00
Benjamin Gaignard
14b4bd01f8 media: verisilicon: Additional fix for the crash when opening the driver
This fixes the following issue observed on Odroid-M1 board:

 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
 Mem abort info:
 ...
 Modules linked in: crct10dif_ce hantro_vpu snd_soc_simple_card snd_soc_simple_card_utils v4l2_vp9 v4l2_h264 rockchip_saradc v4l2_mem2mem videobuf2_dma_contig videobuf2_memops rtc_rk808 videobuf2_v4l2 industrialio_triggered_buffer rockchip_thermal dwmac_rk stmmac_platform stmmac videodev kfifo_buf display_connector videobuf2_common pcs_xpcs mc rockchipdrm analogix_dp dw_mipi_dsi dw_hdmi drm_display_helper panfrost drm_shmem_helper gpu_sched ip_tables x_tables ipv6
 CPU: 3 PID: 176 Comm: v4l_id Not tainted 6.3.0-rc7-next-20230420 #13481
 Hardware name: Hardkernel ODROID-M1 (DT)
 pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
 pc : hantro_try_fmt+0xa0/0x278 [hantro_vpu]
 lr : hantro_try_fmt+0x94/0x278 [hantro_vpu]
 ...
 Call trace:
  hantro_try_fmt+0xa0/0x278 [hantro_vpu]
  hantro_set_fmt_out+0x3c/0x298 [hantro_vpu]
  hantro_reset_raw_fmt+0x98/0x128 [hantro_vpu]
  hantro_set_fmt_cap+0x240/0x254 [hantro_vpu]
  hantro_reset_encoded_fmt+0x94/0xcc [hantro_vpu]
  hantro_reset_fmts+0x18/0x38 [hantro_vpu]
  hantro_open+0xd4/0x20c [hantro_vpu]
  v4l2_open+0x80/0x120 [videodev]
  chrdev_open+0xc0/0x22c
  do_dentry_open+0x13c/0x48c
  vfs_open+0x2c/0x38
  path_openat+0x550/0x934
  do_filp_open+0x80/0x12c
  do_sys_openat2+0xb4/0x168
  __arm64_sys_openat+0x64/0xac
  invoke_syscall+0x48/0x114
  el0_svc_common+0x100/0x120
  do_el0_svc+0x3c/0xa8
  el0_svc+0x40/0xa8
  el0t_64_sync_handler+0xb8/0xbc
  el0t_64_sync+0x190/0x194
 Code: 97fc8a7f f940aa80 52864a61 72a686c1 (b9400800)
 ---[ end trace 0000000000000000 ]---

Fixes: db6f68b51e ("media: verisilicon: Do not set context src/dst formats in reset functions")
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Tested-by: Michael Tretter <m.tretter@pengutronix.de>
Tested-by: Diederik de Haas <didi.debian@cknow.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-26 10:46:47 +01:00
Hans Verkuil
2f16c95e7a media: staging: media: imx: initialize hs_settle to avoid warning
Initialize hs_settle to 0 to avoid this compiler warning:

imx8mq-mipi-csi2.c: In function 'imx8mq_mipi_csi_start_stream.part.0':
imx8mq-mipi-csi2.c:91:55: warning: 'hs_settle' may be used uninitialized [-Wmaybe-uninitialized]
   91 | #define GPR_CSI2_1_S_PRG_RXHS_SETTLE(x) (((x) & 0x3f) << 2)
      |                                                       ^~
imx8mq-mipi-csi2.c:357:13: note: 'hs_settle' was declared here
  357 |         u32 hs_settle;
      |             ^~~~~~~~~

It's a false positive, but it is too complicated for the compiler to detect that.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-26 10:44:54 +01:00
Vaishnav Achath
2a7d6b9c55 media: v4l2-mc: Drop subdev check in v4l2_create_fwnode_links_to_pad()
While updating v4l2_create_fwnode_links_to_pad() to accept non-subdev
sinks, the check is_media_entity_v4l2_subdev() was not removed which
prevented the function from being used with non-subdev sinks, Drop the
unnecessary check.

Fixes: bd5a03bc5b ("media: Accept non-subdev sinks in v4l2_create_fwnode_links_to_pad()")
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-26 10:44:54 +01:00
Raju Rangoju
dc362e20cd amd-xgbe: fix the false linkup in xgbe_phy_status
In the event of a change in XGBE mode, the current auto-negotiation
needs to be reset and the AN cycle needs to be re-triggerred. However,
the current code ignores the return value of xgbe_set_mode(), leading to
false information as the link is declared without checking the status
register.

Fix this by propagating the mode switch status information to
xgbe_phy_status().

Fixes: e57f7a3fea ("amd-xgbe: Prepare for working with more than one type of phy")
Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-26 10:42:06 +01:00
David S. Miller
eba7dbc5eb Merge branch 'mv88e6xxx-phylink-prepare'
Russell King says:

====================
net: dsa: mv88e6xxx: prepare for phylink_pcs conversion

These two patches provide some preparation for converting the mv88e6xxx
DSA driver to use phylink_pcs rather than bolting the serdes bits into
the MAC calls.

In order to correctly drive mv88e6xxx hardware when the PCS code is
split, we need to force the link down while changing the configuration
of a port. This is provided for via the mac_prepare() and mac_finish()
methods, but DSA does not forward these on to DSA drivers.

Patch 1 adds support to the DSA core to forward these two methods to
DSA drivers, and patch 2 moves the code from mv88e6xxx_mac_config()
into the respective methods.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-26 10:39:41 +01:00
Russell King (Oracle)
267d7692f6 net: dsa: mv88e6xxx: move link forcing to mac_prepare/mac_finish
Move the link forcing out of mac_config() and into the mac_prepare()
and mac_finish() methods. This results in no change to the order in
which these operations are performed, but does mean when we convert
mv88e6xxx to phylink_pcs support, we will continue to preserve this
ordering.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-26 10:39:40 +01:00
Russell King (Oracle)
dd805cf3e8 net: dsa: add support for mac_prepare() and mac_finish() calls
Add DSA support for the phylink mac_prepare() and mac_finish() calls.
These were introduced as part of the PCS support to allow MACs to
perform preparatory steps prior to configuration, and finalisation
steps after the MAC and PCS has been configured.

Introducing phylink_pcs support to the mv88e6xxx DSA driver needs some
code moved out of its mac_config() stage into the mac_prepare() and
mac_finish() stages, and this commit facilitates such code in DSA
drivers.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-26 10:39:40 +01:00
P Praneesh
342527f353 wifi: ath12k: Add support to parse new WMI event for 6 GHz regulatory
In order to support different power levels of 6 GHz AP and client, new WMI
event for regulatory (WMI_REG_CHAN_LIST_CC_EXT_EVENTID) has been added in
firmware to provide new parameters required for 6 GHz regulatory rules.

Firmware advertises its capability of handling new event in WMI service ready
event. Based on that, host needs to set host_service_flags in WMI init command
to indicate that host supports processing of this WMI event. Based on
advertised host capability, firmware sends event WMI_REG_CHAN_LIST_CC_EXT_EVENTID.
This new event contains 2G/5G/6G reg rules with additional power value fields
for 6GHz and regd is built accordingly.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0-02903-QCAHKSWPL_SILICONZ-1

Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230502142018.20301-1-quic_rgnanase@quicinc.com
2023-05-26 12:38:51 +03:00
Jakub Kicinski
8a0d57df89 tls: improve lockless access safety of tls_err_abort()
Most protos' poll() methods insert a memory barrier between
writes to sk_err and sk_error_report(). This dates back to
commit a4d258036e ("tcp: Fix race in tcp_poll").

I guess we should do the same thing in TLS, tcp_poll() does
not hold the socket lock.

Fixes: 3c4d755915 ("tls: kernel TLS support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-26 10:35:58 +01:00
Jakub Kicinski
9b66ee06e5 net: ynl: prefix uAPI header include with uapi/
To keep things simple we used to include the uAPI header
in the kernel in the #include <linux/$family.h> format.
This works well enough, most of the genl families should
have headers in include/net/ so linux/$family.h ends up
referring to the uAPI header, anyway. And if it doesn't
no big deal, we'll just include more info than we need.

Unless that is there is a naming conflict. Someone recently
created include/linux/psp.h which will be a problem when
supporting the PSP protocol. (I'm talking about
work-in-progress patches, but it's just a proof that assuming
lack of name conflicts was overly optimistic.)

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-26 10:30:14 +01:00
Jani Nikula
08264f85c5 drm/i915/gsc: use system include style for drm headers
Use <> instead of "" for including headers from include/.

Fixes: 8a9bf29546 ("drm/i915/gsc: add initial support for GSC proxy")
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230525094942.941123-1-jani.nikula@intel.com
2023-05-26 12:28:15 +03:00
Mark Brown
e34f78b970 arm64/cpufeature: Use helper for ECV CNTPOFF cpufeature
The newly added support for ECV CNTPOFF open codes the recently added
helper ARM64_CPUID_FIELDS(), make use of the helper.  No functional
change.

Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20230523-arm64-ecv-helper-v1-1-506dfb5fb199@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-05-26 10:23:32 +01:00
Mark Brown
cb5aa63794 kselftest/arm64: Add a smoke test for ptracing hardware break/watch points
There was a report that the hardware breakpoints and watch points weren't
reporting the debug architecture version as expected, they were reporting
a version of 0 which is not defined in the architecture.  This happens
when running in a KVM guest if the host has a debug architecture version
not supported by KVM, it in turn confuses GDB which rejects any debug
architecture version it does not know about.

Add a test that covers that situation and while we're at it reports the
debug architecture version and number of slots available to aid with
figuring out problems that may arise.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230414-arm64-test-hw-breakpoint-v2-1-90a19e3b1059@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-05-26 10:22:03 +01:00
Pieter Jansen van Vuuren
ca7d05007d sfc: handle VI shortage on ef100 by readjusting the channels
When fewer VIs are allocated than what is allowed we can readjust
the channels by calling efx_mcdi_alloc_vis() again.

Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-26 10:15:30 +01:00
Mark Brown
1f9d4ba683 arm64/esr: Add decode of ISS2 to data abort reporting
The architecture has added more information about faults to ISS2 within
ESR. Add decode of this to our data abort fault decode to aid diagnostics.
Features that are not currently enabled are included here for completeness.

Since the architecture specifies the values of bits within ISS2 in terms
of ISS2 rather than in terms of the register as a whole we do so for our
definitions as well, this makes it easier to review bitfield definitions.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230417-arm64-iss2-dabt-decode-v3-2-c1fa503e503a@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-05-26 10:11:42 +01:00
Mark Brown
de84727544 arm64/esr: Use GENMASK() for the ISS mask
We express the mask for ESR_ELx.ISS in a non-standard manner, not using
the standard helpers. In preparation for adding decode for ISS2 convert to
use GENMASK(). No functional change.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230417-arm64-iss2-dabt-decode-v3-1-c1fa503e503a@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-05-26 10:11:42 +01:00
Nathan Chancellor
35c812050e drm/i915: Fix clang -Wimplicit-fallthrough in intel_async_flip_check_hw()
Clang warns:

  drivers/gpu/drm/i915/display/intel_display.c:6012:3: error: unannotated fall-through between switch labels [-Werror,-Wimplicit-fallthrough]
                  case I915_FORMAT_MOD_X_TILED:
                  ^
  drivers/gpu/drm/i915/display/intel_display.c:6012:3: note: insert 'break;' to avoid fall-through
                  case I915_FORMAT_MOD_X_TILED:
                  ^
                  break;
  1 error generated.

Clang is a little more pedantic than GCC, which does not warn when
falling through to a case that is just break or return. Clang's version
is more in line with the kernel's own stance in deprecated.rst, which
states that all switch/case blocks must end in either break,
fallthrough, continue, goto, or return. Add the missing break to silence
the warning.

Fixes: 937859485a ("drm/i915: Support Async Flip on Linear buffers")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/202305241902.UvHtMoxa-lkp@intel.com/
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Closes: https://lore.kernel.org/CA+G9fYv68V3ewK0Qj-syQj7qX-hQr0H1MFL=QFNuDoE_J2Zu-g@mail.gmail.com/
Reported-by: Tom Rix <trix@redhat.com>
Closes: https://lore.kernel.org/all/20230523125116.1669057-1-trix@redhat.com/
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230524-intel_async_flip_check_hw-implicit-fallthrough-v1-1-83de89e376a1@kernel.org
2023-05-26 11:50:53 +03:00
Ajay Agarwal
da56a1bfba PCI: dwc: Wait for link up only if link is started
In dw_pcie_host_init() regardless of whether the link has been
started or not, the code waits for the link to come up. Even in
cases where start_link() is not defined the code ends up spinning
in a loop for 1 second. Since in some systems dw_pcie_host_init()
gets called during probe, this one second loop for each pcie
interface instance ends up extending the boot time.

Wait for the link up in only if the start_link() is defined.

Link: https://lore.kernel.org/r/20230412093425.3659088-1-ajayagarwal@google.com
Tested-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Sajid Dalvi <sdalvi@google.com>
Signed-off-by: Ajay Agarwal <ajayagarwal@google.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2023-05-26 10:45:12 +02:00
Neil Armstrong
35070674f4 Revert "dt-bindings: bridge: samsung-dsim: Make some flags optional"
This reverts commit cfaf76d349 which was applied
without review due to a bad tool manipulation.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230526-revert-bad-binding-v1-1-67329ad1bd80@linaro.org
2023-05-26 10:34:40 +02:00
Dario Binacchi
f24b495508 drm/panel: simple: fix active size for Ampire AM-480272H3TMQW-T01H
The previous setting was related to the overall dimension and not to the
active display area.
In the "PHYSICAL SPECIFICATIONS" section, the datasheet shows the
following parameters:

 ----------------------------------------------------------
|       Item        |         Specifications        | unit |
 ----------------------------------------------------------
| Display area      | 98.7 (W) x 57.5 (H)           |  mm  |
 ----------------------------------------------------------
| Overall dimension | 105.5(W) x 67.2(H) x 4.96(D)  |  mm  |
 ----------------------------------------------------------

Fixes: 966fea78ad ("drm/panel: simple: Add support for Ampire AM-480272H3TMQW-T01H")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
[narmstrong: fixed Fixes commit id length]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230516085039.3797303-1-dario.binacchi@amarulasolutions.com
2023-05-26 09:54:00 +02:00
Kurt Kanzenbach
c857946a4e net/core: Enable socket busy polling on -RT
Busy polling is currently not allowed on PREEMPT_RT, because it disables
preemption while invoking the NAPI callback. It is not possible to acquire
sleeping locks with disabled preemption. For details see commit
20ab39d13e ("net/core: disable NET_RX_BUSY_POLL on PREEMPT_RT").

However, strict cyclic and/or low latency network applications may prefer busy
polling e.g., using AF_XDP instead of interrupt driven communication.

The preempt_disable() is used in order to prevent the poll_owner and NAPI owner
to be preempted while owning the resource to ensure progress. Netpoll performs
busy polling in order to acquire the lock. NAPI is locked by setting the
NAPIF_STATE_SCHED flag. There is no busy polling if the flag is set and the
"owner" is preempted. Worst case is that the task owning NAPI gets preempted and
NAPI processing stalls.  This is can be prevented by properly prioritising the
tasks within the system.

Allow RX_BUSY_POLL on PREEMPT_RT if NETPOLL is disabled. Don't disable
preemption on PREEMPT_RT within the busy poll loop.

Tested on x86 hardware with v6.1-RT and v6.3-RT on Intel i225 (igc) with
AF_XDP/ZC sockets configured to run in busy polling mode.

Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-26 08:51:26 +01:00
Geert Uytterhoeven
410bb21319 drm/panel: simple: Add Ampire AM-800480L1TMQW-T00H
Add support for the Ampire AM-800480L1TMQW-T00H 5" WVGA TFT LCD panel.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/244d9471e0ed248ff2dea8ded3a5384a1c51904b.1684931026.git.geert+renesas@glider.be
2023-05-26 09:45:02 +02:00
Geert Uytterhoeven
d3a6c2b60f dt-bindings: display: panel-simple: Add Ampire AM-800480L1TMQW-T00H
Document support for the Ampire AM-800480L1TMQW-T00H 5" WVGA TFT LCD
panel.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/422adef8c4941fa56fdadacb3d362a9fb387455e.1684931026.git.geert+renesas@glider.be
2023-05-26 09:45:02 +02:00
Adam Ford
cfaf76d349 dt-bindings: bridge: samsung-dsim: Make some flags optional
In the event a device is connected to the samsung-dsim
controller that doesn't support the burst-clock, the
driver is able to get the requested pixel clock from the
attached device or bridge.  In these instances, the
samsung,burst-clock-frequency isn't needed, so remove
it from the required list.

The pll-clock frequency can be set by the device tree entry
for samsung,pll-clock-frequency, but in some cases, the
pll-clock may have the same clock rate as sclk_mipi clock.
If they are equal, this flag is not needed since the driver
will use the sclk_mipi rate as a fallback.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230526030559.326566-8-aford173@gmail.com
2023-05-26 09:20:42 +02:00
Adam Ford
bb0e13b9e2 drm: bridge: samsung-dsim: Support non-burst mode
The high-speed clock is hard-coded to the burst-clock
frequency specified in the device tree.  However, when
using devices like certain bridge chips without burst mode
and varying resolutions and refresh rates, it may be
necessary to set the high-speed clock dynamically based
on the desired pixel clock for the connected device.

This also removes the need to set a clock speed from
the device tree for non-burst mode operation, since the
pixel clock rate is the rate requested from the attached
device like a bridge chip.  This should have no impact
for people using burst-mode and setting the burst clock
rate is still required for those users.  If the burst
clock is not present, change the error message to
dev_info indicating the clock use the pixel clock.

Signed-off-by: Adam Ford <aford173@gmail.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # imx8mm-icore
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230526030559.326566-7-aford173@gmail.com
2023-05-26 09:20:42 +02:00
Adam Ford
89691775f5 drm: bridge: samsung-dsim: Dynamically configure DPHY timing
The DPHY timings are currently hard coded. Since the input
clock can be variable, the phy timings need to be variable
too.  To facilitate this, we need to cache the hs_clock
based on what is generated from the PLL.

The phy_mipi_dphy_get_default_config_for_hsclk function
configures the DPHY timings in pico-seconds, and a small macro
converts those timings into clock cycles based on the hs_clk.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Michael Walle <michael@walle.cc>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # imx8mm-icore
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230526030559.326566-6-aford173@gmail.com
2023-05-26 09:20:41 +02:00
Adam Ford
171b3b1e0f drm: bridge: samsung-dsim: Select GENERIC_PHY_MIPI_DPHY
In order to support variable DPHY timings, it's necessary
to enable GENERIC_PHY_MIPI_DPHY so phy_mipi_dphy_get_default_config
can be used to determine the nominal values for a given resolution
and refresh rate.

Signed-off-by: Adam Ford <aford173@gmail.com>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230526030559.326566-5-aford173@gmail.com
2023-05-26 09:20:41 +02:00
Adam Ford
33d8d14c83 drm: bridge: samsung-dsim: Fetch pll-clock-frequency automatically
Make the pll-clock-frequency optional.  If it's present, use it
to maintain backwards compatibility with existing hardware.  If it
is absent, read clock rate of "sclk_mipi" to determine the rate.
Since it can be optional, change the message from an error to
dev_info.

Signed-off-by: Adam Ford <aford173@gmail.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # imx8mm-icore
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230526030559.326566-4-aford173@gmail.com
2023-05-26 09:20:41 +02:00
Adam Ford
54f1a83c72 drm: bridge: samsung-dsim: Fix PMS Calculator on imx8m[mnp]
According to Table 13-45 of the i.MX8M Mini Reference Manual, the min
and max values for M and the frequency range for the VCO_out
calculator were incorrect.  This information was contradicted in other
parts of the mini, nano and plus manuals.  After reaching out to my
NXP Rep, when confronting him about discrepencies in the Nano manual,
he responded with:
 "Yes it is definitely wrong, the one that is part
  of the NOTE in MIPI_DPHY_M_PLLPMS register table against PMS_P,
  PMS_M and PMS_S is not correct. I will report this to Doc team,
  the one customer should be take into account is the Table 13-40
  DPHY PLL Parameters and the Note above."

These updated values also match what is used in the NXP downstream
kernel.

To fix this, make new variables to hold the min and max values of m
and the minimum value of VCO_out, and update the PMS calculator to
use these new variables instead of using hard-coded values to keep
the backwards compatibility with other parts using this driver.

Fixes: 4d562c70c4 ("drm: bridge: samsung-dsim: Add i.MX8M Mini/Nano support")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # imx8mm-icore
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230526030559.326566-3-aford173@gmail.com
2023-05-26 09:20:40 +02:00
Lucas Stach
a617b33f7e drm: bridge: samsung-dsim: fix blanking packet size calculation
Scale the blanking packet sizes to match the ratio between HS clock
and DPI interface clock. The controller seems to do internal scaling
to the number of active lanes, so we don't take those into account.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Adam Ford <aford173@gmail.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # imx8mm-icore
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230526030559.326566-2-aford173@gmail.com
2023-05-26 09:20:40 +02:00
Rob Clark
1a56fcf08a drm/amdgpu: Fix no-procfs build
Fixes undefined symbol when PROC_FS is not enabled.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202305251510.U0R2as7k-lkp@intel.com/
Fixes: 376c25f8ca ("drm/amdgpu: Switch to fdinfo helper")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: <alexander.deucher@amd.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230525155227.560094-1-robdclark@gmail.com
2023-05-26 09:13:04 +02:00
Dave Airlie
5502d1fab0 Merge tag 'drm-misc-fixes-2023-05-24' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v6.4-rc4:
- A few non-trivial fixes to qaic.
- Fix drmm_mutex_init always using same lock class.
- Fix pl111 fb depth.
- Fix uninitialised gamma lut in mgag200.
- Add Aya Neo Air Plus quirk.
- Trivial null check removal in scheduler.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d19f748c-2c5b-8140-5b05-a8282dfef73e@linux.intel.com
2023-05-26 15:38:31 +10:00
Dave Airlie
13aa38f86e Merge tag 'amd-drm-fixes-6.4-2023-05-24' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.4-2023-05-24:

amdgpu:
- Fix missing BO unlocking in KIQ error path
- Avoid spurious secure display error messages
- SMU13 fix
- Fix an OD regression
- GPU reset display IRQ warning fix
- MST fix

radeon:
- Fix a DP regression

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230524211238.7749-1-alexander.deucher@amd.com
2023-05-26 15:30:09 +10:00
Dave Airlie
94d39d0128 Merge tag 'drm-intel-fixes-2023-05-25' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
PIPEDMC disabling fix for bigjoiner config

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZG9aROGyc947/J1l@jlahtine-mobl.ger.corp.intel.com
2023-05-26 14:36:50 +10:00
Dave Airlie
b8887e796e drm-misc-next for v6.5:
UAPI Changes:
 
 Cross-subsystem Changes:
 
  * fbdev: Move framebuffer I/O helpers to <asm/fb.h>, fix naming
 
  * firmware: Init sysfb as early as possible
 
 Core Changes:
 
  * DRM scheduler: Rename interfaces
 
  * ttm: Store ttm_device_funcs in .rodata
 
  * Replace strlcpy() with strscpy() in various places
 
  * Cleanups
 
 Driver Changes:
 
  * bridge: analogix: Fix endless probe loop; samsung-dsim: Support
    swapping clock/data polarity; tc358767: Use devm_ Cleanups;
 
  * gma500: Fix I/O-memory access
 
  * panel: boe-tv101wum-nl6: Improve initialization;  sharp-ls043t1le001:
 	  Mode fixes;  simple: Add BOE EV121WXM-N10-1850 plus DT bindings;
 	  AddS6D7AA0 plus DT bindings;  Cleanups
 
  * ssd1307x: Style fixes
 
  * sun4i: Release clocks
 
  * msm: Fix I/O-memory access
 
  * nouveau: Cleanups
 
  * shmobile: Support Renesas; Enable framebuffer console; Various fixes
 
  * vkms: Fix RGB565 conversion
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmRuBXEACgkQaA3BHVML
 eiPLkwgAqCa7IuSDQhFMWVOI0EJpPPEHtHM8SCT1Pp8aniXk23Ru+E16c5zck53O
 uf4tB+zoFrwD9npy60LIvX1OZmXS1KI4+ZO8itYFk6GSjxqbTWbjNFREBeWFdIpa
 OG54nEqjFQZzEXY+gJYDpu5zqLy3xLN07ZgQkcMyfW3O/Krj4LLzfQTDl+jP5wkO
 7/v5Eu5CG5QjupMxIjb4e+ruUflp73pynur5bhZsfS1bPNGFTnxHlwg7NWnBXU7o
 Hg23UYfCuZZWPmuO26EeUDlN33rCoaycmVgtpdZft2eznca5Mg74Loz1Qc3GQfjw
 LLvKsAIlBcZvEIhElkzhtXitBoe7LQ==
 =/9zV
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-next-2023-05-24' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v6.5:

UAPI Changes:

Cross-subsystem Changes:

 * fbdev: Move framebuffer I/O helpers to <asm/fb.h>, fix naming

 * firmware: Init sysfb as early as possible

Core Changes:

 * DRM scheduler: Rename interfaces

 * ttm: Store ttm_device_funcs in .rodata

 * Replace strlcpy() with strscpy() in various places

 * Cleanups

Driver Changes:

 * bridge: analogix: Fix endless probe loop; samsung-dsim: Support
   swapping clock/data polarity; tc358767: Use devm_ Cleanups;

 * gma500: Fix I/O-memory access

 * panel: boe-tv101wum-nl6: Improve initialization;  sharp-ls043t1le001:
	  Mode fixes;  simple: Add BOE EV121WXM-N10-1850 plus DT bindings;
	  AddS6D7AA0 plus DT bindings;  Cleanups

 * ssd1307x: Style fixes

 * sun4i: Release clocks

 * msm: Fix I/O-memory access

 * nouveau: Cleanups

 * shmobile: Support Renesas; Enable framebuffer console; Various fixes

 * vkms: Fix RGB565 conversion

Signed-off-by: Dave Airlie <airlied@redhat.com>

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmRuBXEACgkQaA3BHVML
# eiPLkwgAqCa7IuSDQhFMWVOI0EJpPPEHtHM8SCT1Pp8aniXk23Ru+E16c5zck53O
# uf4tB+zoFrwD9npy60LIvX1OZmXS1KI4+ZO8itYFk6GSjxqbTWbjNFREBeWFdIpa
# OG54nEqjFQZzEXY+gJYDpu5zqLy3xLN07ZgQkcMyfW3O/Krj4LLzfQTDl+jP5wkO
# 7/v5Eu5CG5QjupMxIjb4e+ruUflp73pynur5bhZsfS1bPNGFTnxHlwg7NWnBXU7o
# Hg23UYfCuZZWPmuO26EeUDlN33rCoaycmVgtpdZft2eznca5Mg74Loz1Qc3GQfjw
# LLvKsAIlBcZvEIhElkzhtXitBoe7LQ==
# =/9zV
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 24 May 2023 22:39:13 AEST
# gpg:                using RSA key 7217FBAC8CE9CF6344A168E5680DC11D530B7A23
# gpg: Can't check signature: No public key

# Conflicts:
#	MAINTAINERS
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230524124237.GA25416@linux-uq9g
2023-05-26 14:23:29 +10:00
Jakub Kicinski
aa866ee4b1 mlx5-fixes-2023-05-24
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmRu2ZQACgkQSD+KveBX
 +j4sQAgAtCLJfYADpU7yWPZ3SMAnTelc65PfawdjEyBlRjE2CxsQ/bnRiWUXuR5i
 twsGvAJxQfpDBV0z/TxcdYznpLxHSIhosg0pRH+Tc4Lk6PjdFK7Sviqyw9JTrCJX
 rVaLJ5N877Pu5gH++OqFs8C+2gkrppQKWJtrmUaAPPdXixkr2q2pwlJiCOLpGYTN
 9yGKBO29wtvD0AJsssS8VJgy6uHMaOsTTACR4fYuV/huTKa5QfYBdJY1HqEs7Fe2
 LhGyLjVx6nHD8kt+fL9J2LJ6CLnG9a50reKuZnCOBa42obahUBCAQ5mr1mQlzNr5
 cTOmAZM+OWOa7bXJAY9AbRorlr1A4w==
 =DRJZ
 -----END PGP SIGNATURE-----

Merge tag 'mlx5-fixes-2023-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5 fixes 2023-05-24

This series includes bug fixes for the mlx5 driver.

* tag 'mlx5-fixes-2023-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  Documentation: net/mlx5: Wrap notes in admonition blocks
  Documentation: net/mlx5: Add blank line separator before numbered lists
  Documentation: net/mlx5: Use bullet and definition lists for vnic counters description
  Documentation: net/mlx5: Wrap vnic reporter devlink commands in code blocks
  net/mlx5: Fix check for allocation failure in comp_irqs_request_pci()
  net/mlx5: DR, Add missing mutex init/destroy in pattern manager
  net/mlx5e: Move Ethernet driver debugfs to profile init callback
  net/mlx5e: Don't attach netdev profile while handling internal error
  net/mlx5: Fix post parse infra to only parse every action once
  net/mlx5e: Use query_special_contexts cmd only once per mdev
  net/mlx5: fw_tracer, Fix event handling
  net/mlx5: SF, Drain health before removing device
  net/mlx5: Drain health before unregistering devlink
  net/mlx5e: Do not update SBCM when prio2buffer command is invalid
  net/mlx5e: Consider internal buffers size in port buffer calculations
  net/mlx5e: Prevent encap offload when neigh update is running
  net/mlx5e: Extract remaining tunnel encap code to dedicated file
====================

Link: https://lore.kernel.org/r/20230525034847.99268-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-25 21:09:41 -07:00
Kuniyuki Iwashima
822b5a1c17 af_packet: Fix data-races of pkt_sk(sk)->num.
syzkaller found a data race of pkt_sk(sk)->num.

The value is changed under lock_sock() and po->bind_lock, so we
need READ_ONCE() to access pkt_sk(sk)->num without these locks in
packet_bind_spkt(), packet_bind(), and sk_diag_fill().

Note that WRITE_ONCE() is already added by commit c7d2ef5dd4
("net/packet: annotate accesses to po->bind").

BUG: KCSAN: data-race in packet_bind / packet_do_bind

write (marked) to 0xffff88802ffd1cee of 2 bytes by task 7322 on cpu 0:
 packet_do_bind+0x446/0x640 net/packet/af_packet.c:3236
 packet_bind+0x99/0xe0 net/packet/af_packet.c:3321
 __sys_bind+0x19b/0x1e0 net/socket.c:1803
 __do_sys_bind net/socket.c:1814 [inline]
 __se_sys_bind net/socket.c:1812 [inline]
 __x64_sys_bind+0x40/0x50 net/socket.c:1812
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x72/0xdc

read to 0xffff88802ffd1cee of 2 bytes by task 7318 on cpu 1:
 packet_bind+0xbf/0xe0 net/packet/af_packet.c:3322
 __sys_bind+0x19b/0x1e0 net/socket.c:1803
 __do_sys_bind net/socket.c:1814 [inline]
 __se_sys_bind net/socket.c:1812 [inline]
 __x64_sys_bind+0x40/0x50 net/socket.c:1812
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x72/0xdc

value changed: 0x0300 -> 0x0000

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 7318 Comm: syz-executor.4 Not tainted 6.3.0-13380-g7fddb5b5300c #4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014

Fixes: 96ec632714 ("packet: Diag core and basic socket info dumping")
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230524232934.50950-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-25 21:03:23 -07:00