Currently most list_head fields of various structs within user_events
are simply named link. This causes folks to keep additional context in
their head when working with the code, which can be confusing.
Instead of using link, describe what the actual link is, for example:
list_del_rcu(&mm->link);
Changes into:
list_del_rcu(&mm->mms_link);
The reader now is given a hint the link is to the mms global list
instead of having to remember or spot check within the code.
Link: https://lkml.kernel.org/r/20230519230741.669-4-beaub@linux.microsoft.com
Link: https://lore.kernel.org/linux-trace-kernel/CAHk-=wicngggxVpbnrYHjRTwGE0WYscPRM+L2HO2BF8ia1EXgQ@mail.gmail.com/
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
pin_user_pages_remote() can reschedule which means we cannot hold any
RCU lock while using it. Now that enablers are not exposed out to the
tracing register callbacks during fork(), there is clearly no need to
require the RCU lock as event_mutex is enough to protect changes.
Remove unneeded RCU usages when pinning pages and walking enablers with
event_mutex held. Cleanup a misleading "safe" list walk that is not
needed. During fork() duplication, remove unneeded RCU list add, since
the list is not exposed yet.
Link: https://lkml.kernel.org/r/20230519230741.669-3-beaub@linux.microsoft.com
Link: https://lore.kernel.org/linux-trace-kernel/CAHk-=wiiBfT4zNS29jA0XEsy8EmbqTH1hAPdRJCDAJMD8Gxt5A@mail.gmail.com/
Fixes: 7235759084 ("tracing/user_events: Use remote writes for event enablement")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[ change log written by Beau Belgrave ]
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When a new mm is being created in a fork() path it currently is
allocated and then attached in one go. This leaves the mm exposed out to
the tracing register callbacks while any parent enabler locations are
copied in. This should not happen.
Split up mm alloc and attach as unique operations. When duplicating
enablers, first alloc, then duplicate, and only upon success, attach.
This prevents any timing window outside of the event_reg mutex for
enablement walking. This allows for dropping RCU requirement for
enablement walking in later patches.
Link: https://lkml.kernel.org/r/20230519230741.669-2-beaub@linux.microsoft.com
Link: https://lore.kernel.org/linux-trace-kernel/CAHk-=whTBvXJuoi_kACo3qi5WZUmRrhyA-_=rRFsycTytmB6qw@mail.gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[ change log written by Beau Belgrave ]
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Interrupts got recently enabled for tpm_tis.
The interrupts initially works on the device but they will stop arriving
after circa ~200 interrupts. On system reboot/shutdown this will cause a
long wait (120000 jiffies).
[jarkko@kernel.org: fix a merge conflict and adjust the commit message]
Fixes: e644b2f498 ("tpm, tpm_tis: Enable interrupt test")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
- fix signal delivery to FDPIC process
- add __bswap{si,di}2 helpers
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEK2eFS5jlMn3N6xfYUfnMkfg/oEQFAmRtI6wTHGpjbXZia2Jj
QGdtYWlsLmNvbQAKCRBR+cyR+D+gRCpcD/wPRndDJFHCOAJU3OihbbNX3u1s6Aj8
dUC/cTLIVMOT2Y2ic04IcWwBoSUR6hc6gr3VQijhKjGIOz+9wvpeUH25qvYAczSO
Du7K73Gs1GcBl8RP4LlKc8Dsgk/+Z4gf3yReBsh4Up1fPgGy94mGrxY1ah48Exu+
tUYfYQrcImKktIAhFq2FU4RvaA4UNZIx91Xm1Cg3F/O8hGMCFJauicis/m7TN7M0
gb9QnxYEEQFeSZgfLftfx87raYuDcRlLyWeyKam0RkmIZY8xKgqJVumkvf74tILn
nwnw7qaBpNsoWOR2aLD9vPhImd0xrNrlqcD5G0NzHiCr0rQ6A2U1bwFlglZ1/DJm
WoGgNnkxuL7otFv3PwYhKlYvj+vh2+CgWVXQkXhlhg4E05oXhQFFnWjnlucLZJ1R
2D5O7z7uZubW2C6y+lD8GrSz5JXdWylk2i4n+bPP9ed3yXqo5ZBGgQtzHT0p2Er6
Bp1T1ddmnv8zwnptb5dihfK7ey1ao4e1ILmt1ZZhuGIAMOD4ZeGFaVobSiMXN7Ct
XqwcKNxzZe1PCfbdPqj+8nuQPFFVXjaDjfDReX3GLT5SYXcrfFtrPvhTd/2OsQFj
1oToKmLZBcALr8q5xc//DCM/8d/PdwL78stCUV6tgBvp1mavmx49lGsLIoTpeGY2
mPatOpwW0XR2hQ==
=Pb/f
-----END PGP SIGNATURE-----
Merge tag 'xtensa-20230523' of https://github.com/jcmvbkbc/linux-xtensa
Pull Xtensa fixes from Max Filippov:
- fix signal delivery to FDPIC process
- add __bswap{si,di}2 helpers
* tag 'xtensa-20230523' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: add __bswap{si,di}2 helpers
xtensa: fix signal delivery to FDPIC process
Merge series from David Rau <David.Rau.opensource@dm.renesas.com>:
This patchset adds the support of DA7219 Jack insertion detection
polarity selection.
The first patch replaces the old txt binding with a new schema binding.
The second patch adds `dlg,jack-ins-det-pty` property for Jack
insertion detection polarity selection.
The last patch adds the driver support for this topic.
The series has been verified on the DA7219 development kit.
IMA currently accesses the i_version out of the inode directly when it
does a measurement. This is fine for most simple filesystems, but can be
problematic with more complex setups (e.g. overlayfs).
Make IMA instead call vfs_getattr_nosec to get this info. This allows
the filesystem to determine whether and how to report the i_version, and
should allow IMA to work properly with a broader class of filesystems in
the future.
Reported-and-Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Currently input_grab_device() isn't covered by any tests
Thus, adding a test to cover the cases:
1. The device is grabbed successfully
2. Trying to grab a device that is already grabbed by another input
handle
Signed-off-by: Dana Elfassy <dangel101@gmail.com>
Tested-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20230522215514.722564-1-dangel101@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dynamic MSI-X is supported. Clear VFIO_IRQ_INFO_NORESIZE
to provide guidance to user space.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/fd1ef2bf6ae972da8e2805bc95d5155af5a8fb0a.1683740667.git.reinette.chatre@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
pci_msix_alloc_irq_at() enables an individual MSI-X interrupt to be
allocated after MSI-X enabling.
Use dynamic MSI-X (if supported by the device) to allocate an interrupt
after MSI-X is enabled. An MSI-X interrupt is dynamically allocated at
the time a valid eventfd is assigned. This is different behavior from
a range provided during MSI-X enabling where interrupts are allocated
for the entire range whether a valid eventfd is provided for each
interrupt or not.
The PCI-MSIX API requires that some number of irqs are allocated for
an initial set of vectors when enabling MSI-X on the device. When
dynamic MSIX allocation is not supported, the vector table, and thus
the allocated irq set can only be resized by disabling and re-enabling
MSI-X with a different range. In that case the irq allocation is
essentially a cache for configuring vectors within the previously
allocated vector range. When dynamic MSI-X allocation is supported,
the API still requires some initial set of irqs to be allocated, but
also supports allocating and freeing specific irq vectors both
within and beyond the initially allocated range.
For consistency between modes, as well as to reduce latency and improve
reliability of allocations, and also simplicity, this implementation
only releases irqs via pci_free_irq_vectors() when either the interrupt
mode changes or the device is released.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/lkml/20230403211841.0e206b67.alex.williamson@redhat.com/
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/956c47057ae9fd45591feaa82e9ae20929889249.1683740667.git.reinette.chatre@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Not all MSI-X devices support dynamic MSI-X allocation. Whether
a device supports dynamic MSI-X should be queried using
pci_msix_can_alloc_dyn().
Instead of scattering code with pci_msix_can_alloc_dyn(),
probe this ability once and store it as a property of the
virtual device.
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/f1ae022c060ecb7e527f4f53c8ccafe80768da47.1683740667.git.reinette.chatre@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
struct vfio_pci_core_device contains eleven boolean flags.
Boolean flags clearly indicate their usage but space usage
starts to be a concern when there are many.
An upcoming change adds another boolean flag to
struct vfio_pci_core_device, thereby increasing the concern
that the boolean flags are consuming unnecessary space.
Transition the boolean flags to use bitfields. On a system that
uses one byte per boolean this reduces the space consumed
by existing flags from 11 bytes to 2 bytes with room for
a few more flags without increasing the structure's size.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/cf34bf0499c889554a8105eeb18cc0ab673005be.1683740667.git.reinette.chatre@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In preparation for surrounding code change it is helpful to
ensure that existing comments are accurate.
Remove inaccurate comment about direct access and update
the rest of the comment to reflect the purpose of writing
the cached MSI message to the device.
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/lkml/20230330164050.0069e2a5.alex.williamson@redhat.com/
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5b605ce7dcdab5a5dfef19cec4d73ae2fdad3ae1.1683740667.git.reinette.chatre@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
struct vfio_pci_core_device::num_ctx counts how many interrupt
contexts have been allocated. When all interrupt contexts are
allocated simultaneously num_ctx provides the upper bound of all
vectors that can be used as indices into the interrupt context
array.
With the upcoming support for dynamic MSI-X the number of
interrupt contexts does not necessarily span the range of allocated
interrupts. Consequently, num_ctx is no longer a trusted upper bound
for valid indices.
Stop using num_ctx to determine if a provided vector is valid. Use
the existence of allocated interrupt.
This changes behavior on the error path when user space provides
an invalid vector range. Behavior changes from early exit without
any modifications to possible modifications to valid vectors within
the invalid range. This is acceptable considering that an invalid
range is not a valid scenario, see link to discussion.
The checks that ensure that user space provides a range of vectors
that is valid for the device are untouched.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/lkml/20230316155646.07ae266f.alex.williamson@redhat.com/
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/e27d350f02a65b8cbacd409b4321f5ce35b3186d.1683740667.git.reinette.chatre@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Interrupt context is statically allocated at the time interrupts
are allocated. Following allocation, the context is managed by
directly accessing the elements of the array using the vector
as index. The storage is released when interrupts are disabled.
It is possible to dynamically allocate a single MSI-X interrupt
after MSI-X is enabled. A dynamic storage for interrupt context
is needed to support this. Replace the interrupt context array with an
xarray (similar to what the core uses as store for MSI descriptors)
that can support the dynamic expansion while maintaining the
custom that uses the vector as index.
With a dynamic storage it is no longer required to pre-allocate
interrupt contexts at the time the interrupts are allocated.
MSI and MSI-X interrupt contexts are only used when interrupts are
enabled. Their allocation can thus be delayed until interrupt enabling.
Only enabled interrupts will have associated interrupt contexts.
Whether an interrupt has been allocated (a Linux irq number exists
for it) becomes the criteria for whether an interrupt can be enabled.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/lkml/20230404122444.59e36a99.alex.williamson@redhat.com/
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/40e235f38d427aff79ae35eda0ced42502aa0937.1683740667.git.reinette.chatre@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Enabling and disabling of an interrupt involves several steps
that can fail. Cleanup after failure is done when the error
is encountered, resulting in some repetitive code.
Support for dynamic contexts will introduce more steps during
interrupt enabling and disabling.
Transition to centralized exit path in preparation for dynamic
contexts to eliminate duplicate error handling code.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/72dddae8aa710ce522a74130120733af61cffe4d.1683740667.git.reinette.chatre@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Interrupt context storage is statically allocated at the time
interrupts are allocated. Following allocation, the interrupt
context is managed by directly accessing the elements of the
array using the vector as index.
It is possible to allocate additional MSI-X vectors after
MSI-X has been enabled. Dynamic storage of interrupt context
is needed to support adding new MSI-X vectors after initial
allocation.
Replace direct access of array elements with pointers to the
array elements. Doing so reduces impact of moving to a new data
structure. Move interactions with the array to helpers to
mostly contain changes needed to transition to a dynamic
data structure.
No functional change intended.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/eab289693c8325ede9aba99380f8b8d5143980a4.1683740667.git.reinette.chatre@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
User space provides the vector as an unsigned int that is checked
early for validity (vfio_set_irqs_validate_and_prepare()).
A later negative check of the provided vector is not necessary.
Remove the negative check and ensure the type used
for the vector is consistent as an unsigned int.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/28521e1b0b091849952b0ecb8c118729fc8cdc4f.1683740667.git.reinette.chatre@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
vfio_msi_disable() releases all previously allocated state
associated with each interrupt before disabling MSI/MSI-X.
vfio_msi_disable() iterates twice over the interrupt state:
first directly with a for loop to do virqfd cleanup, followed
by another for loop within vfio_msi_set_block() that removes
the interrupt handler and its associated state using
vfio_msi_set_vector_signal().
Simplify interrupt cleanup by iterating over allocated interrupts
once.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/837acb8cbe86a258a50da05e56a1f17c1a19abbe.1683740667.git.reinette.chatre@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
While doing my research to improve the xpad device names I noticed
that the 1532:0037 VID/PID seems to be used by the DeathAdder 2013,
so that Razer Sabertooth instance looked wrong and very suspect to
me. I didn't see any mention in the official drivers, either.
After doing more research, it turns out that the xpad list
is used by many other projects (like Steam) as-is [1], this
issue was reported [2] and Valve/Sam Lantinga fixed it [3]:
[1]: dcc5eef0e2/src/joystick/controller_type.h (L251)
[2]: https://steamcommunity.com/app/353380/discussions/0/1743392486228754770/
[3]: https://hg.libsdl.org/SDL/rev/29809f6f0271
(With multiple Internet users reporting similar issues, not linked here)
After not being able to find the correct VID/PID combination anywhere
on the Internet and not receiving any reply from Razer support I did
some additional detective work, it seems like it presents itself as
"Razer Sabertooth Gaming Controller (XBOX360)", code 1689:FE00.
Leaving us with this:
* Razer Sabertooth (1689:fe00)
* Razer Sabertooth Elite (24c6:5d04)
* Razer DeathAdder 2013 (1532:0037) [note: not a gamepad]
So, to sum things up; remove this conflicting/duplicate entry:
{ 0x1532, 0x0037, "Razer Sabertooth", 0, XTYPE_XBOX360 },
As the real/correct one is already present there, even if
the Internet as a whole insists on presenting it as the
Razer Sabertooth Elite, which (by all accounts) is not:
{ 0x1689, 0xfe00, "Razer Sabertooth", 0, XTYPE_XBOX360 },
Actual change in SDL2 referencing this kernel issue:
e5e5416975
For more information of the device, take a look here:
https://github.com/xboxdrv/xboxdrv/pull/59
You can see a lsusb dump here: https://github.com/xboxdrv/xboxdrv/files/76581/Qa6dBcrv.txt
Fixes: f554f619b7 ("Input: xpad - sync device IDs with xboxdrv")
Signed-off-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com>
Reviewed-by: Cameron Gutman <aicommander@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/5c12dbdb-5774-fc68-5c58-ca596383663e@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Merge series from Sebastian Reichel <sebastian.reichel@collabora.com>:
All existing boards using RK3588/RK3588s use RK806 PMICs. This series is now
the main blocker for full upstream support of those boards and it would be good
to have it merged for 6.5 :) The patches have been tested on multiple different
platforms and are mainly missing an Ack from Mark or Liam for the rk808-regulator
changes.
Merging must happen through a single tree, since the pinctrl and regulator
drivers rely on the register definitions from the include file added by the MFD
patch. My suggested merge strategy is that Lee creates an immutable branch for
the regulator/pinctrl tree once all Acks have been collected.
Merge series from Daniel Baluta <daniel.baluta@oss.nxp.com>:
This patch series provides better handling of cases where sending
a data blob to FW results in a validation error.
In this case we restore to the last good known value instead of keeping
the data that firwmare rejected.
Merge series from Trevor Wu <trevor.wu@mediatek.com>:
The patch series includes a kselftest fix and changes for extending
driver capability to support more use cases.
Add a selftest demonstrating using detach-mounted BPF FS using new mount
APIs, and pinning and getting BPF map using such mount. This
demonstrates how something like container manager could setup BPF FS,
pin and adjust all the necessary objects in it, all before exposing BPF
FS to a particular mount namespace.
Also add a few subtests validating all meaningful combinations of
path_fd and pathname. We use mounted /sys/fs/bpf location for these.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230523170013.728457-5-andrii@kernel.org
Add path_fd support for bpf_obj_pin() and bpf_obj_get() operations
(through their opts-based variants). This allows to take advantage of
new kernel-side support for O_PATH-based pin/get location specification.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230523170013.728457-4-andrii@kernel.org
Current UAPI of BPF_OBJ_PIN and BPF_OBJ_GET commands of bpf() syscall
forces users to specify pinning location as a string-based absolute or
relative (to current working directory) path. This has various
implications related to security (e.g., symlink-based attacks), forces
BPF FS to be exposed in the file system, which can cause races with
other applications.
One of the feedbacks we got from folks working with containers heavily
was that inability to use purely FD-based location specification was an
unfortunate limitation and hindrance for BPF_OBJ_PIN and BPF_OBJ_GET
commands. This patch closes this oversight, adding path_fd field to
BPF_OBJ_PIN and BPF_OBJ_GET UAPI, following conventions established by
*at() syscalls for dirfd + pathname combinations.
This now allows interesting possibilities like working with detached BPF
FS mount (e.g., to perform multiple pinnings without running a risk of
someone interfering with them), and generally making pinning/getting
more secure and not prone to any races and/or security attacks.
This is demonstrated by a selftest added in subsequent patch that takes
advantage of new mount APIs (fsopen, fsconfig, fsmount) to demonstrate
creating detached BPF FS mount, pinning, and then getting BPF map out of
it, all while never exposing this private instance of BPF FS to outside
worlds.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/bpf/20230523170013.728457-4-andrii@kernel.org
BACKGROUND
==========
When multiple work items are queued to a workqueue, their execution order
doesn't match the queueing order. They may get executed in any order and
simultaneously. When fully serialized execution - one by one in the
queueing order - is needed, an ordered workqueue should be used which can
be created with alloc_ordered_workqueue().
However, alloc_ordered_workqueue() was a later addition. Before it, an
ordered workqueue could be obtained by creating an UNBOUND workqueue with
@max_active==1. This originally was an implementation side-effect which was
broken by 4c16bd327c ("workqueue: restore WQ_UNBOUND/max_active==1 to be
ordered"). Because there were users that depended on the ordered execution,
5c0338c687 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
made workqueue allocation path to implicitly promote UNBOUND workqueues w/
@max_active==1 to ordered workqueues.
While this has worked okay, overloading the UNBOUND allocation interface
this way creates other issues. It's difficult to tell whether a given
workqueue actually needs to be ordered and users that legitimately want a
min concurrency level wq unexpectedly gets an ordered one instead. With
planned UNBOUND workqueue updates to improve execution locality and more
prevalence of chiplet designs which can benefit from such improvements,
this isn't a state we wanna be in forever.
This patch series audits all callsites that create an UNBOUND workqueue w/
@max_active==1 and converts them to alloc_ordered_workqueue() as necessary.
WHAT TO LOOK FOR
================
The conversions are from
alloc_workqueue(WQ_UNBOUND | flags, 1, args..)
to
alloc_ordered_workqueue(flags, args...)
which don't cause any functional changes. If you know that fully ordered
execution is not necessary, please let me know. I'll drop the conversion
and instead add a comment noting the fact to reduce confusion while
conversion is in progress.
If you aren't fully sure, it's completely fine to let the conversion
through. The behavior will stay exactly the same and we can always
reconsider later.
As there are follow-up workqueue core changes, I'd really appreciate if the
patch can be routed through the workqueue tree w/ your acks. Thanks.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Ming Qian <ming.qian@nxp.com>
Cc: Shijie Qin <shijie.qin@nxp.com>
Cc: Zhou Peng <eagle.zhou@nxp.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-media@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
Fix cifs_limit_bvec_subset() so that it limits the span to the maximum
specified and won't return with a size greater than max_size.
Fixes: d08089f649 ("cifs: Change the I/O paths to use an iterator rather than a page list")
Cc: stable@vger.kernel.org # 6.3
Reported-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <smfrench@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Tom Talpey <tom@talpey.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
We are currently synchronizing every time the data timestamp with
the IT timestamp, leading to system jitter jamming timestamps.
To fix that and keep it simple, let's just synchronize when the
delta is bigger than the acceptable jitter, and keep
synchronization at the jitter value.
The result is much stable timestamps reflecting better the real
physical value. Example @50Hz delta timestamp,
* before: 20.123ms, 19.721ms, 20.023ms, 20.353ms, 19.821ms, ...
* after: 20.173ms, 20.173ms, 20.173ms, 20.40ms, 20.173ms, ...
Refactorize code and delete the unnecessary handling of multiple
FIFO data.
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20230522093210.817212-1-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ROHM BU27008 is a sensor with 5 photodiodes (red, green, blue, clear
and IR) with four configurable channels. Red and green being always
available and two out of the rest three (blue, clear, IR) can be
selected to be simultaneously measured. Typical application is adjusting
LCD backlight of TVs, mobile phones and tablet PCs.
Add initial support for the ROHM BU27008 color sensor.
- raw_read() of RGB and clear channels
- triggered buffer w/ DRDY interrtupt
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/2594162f0e44148cffb1fb05f1d6edfde6bd11bc.1683541225.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The new generic iio_validate_own_trigger() can be used as
validate_trigger callback for verifying the used trigger belongs to same
device as the iio_dev.
Use the generic function instead of rolling own one.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/cbd585e4787f62dc1a343a51b629ce73dd7d5426.1683541225.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Some triggers can only be attached to the IIO device that corresponds to
the same physical device. Implement generic helper which can be used as
a validate_trigger callback for such devices.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/51cd3e3e74a6addf8d333f4a109fb9c5a11086ee.1683541225.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ROHM BU27008 is a sensor with 5 photodiodes (red, green, blue, clear
and IR) with four configurable channels. Red and green being always
available and two out of the rest three (blue, clear, IR) can be
selected to be simultaneously measured. Typical application is adjusting
LCD backlight of TVs, mobile phones and tablet PCs.
Add BU27008 dt-bindings.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/f24196e11ee73511312b629daa20c7d783d8bf6c.1683541225.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for MLX90615 Infra Red Thermometer, which seems to be
the predecesor of MLX90614 . There are significant differences in
the register layout compared to MLX90614, but the functionality
of the device is virtually identical.
The following differences have been identified:
- RAM/EEPROM/SLEEP access opcodes are different
- RAM/EEPROM registers are at different offsets
- EEPROM emissivity and configuration registers are at different offsets
- EEPROM configuration register bits are shuffled around
- EEPROM emissivity settings are 14 bit on MLX90615 , 16 bit on MLX90614
- MLX90615 can only ever support one sensor, MLX90614 could support two
- FIR filter is set to fixed settings on MLX90615
- IIR filter coefficients are different
This patch fills in the MLX90615 specific description and quirk handling.
The IIR filter coefficients were provided by Melexis as follows:
0b0000 - Forbidden value
0b0001 - 100% - settling time = refresh rate = 205ms (around 5Hz)
0b0010 - 50% - settling time = 2050ms (around 0.5Hz)
0b0011 - 33% - settling time = 36900ms (around 0.3Hz)
0b0100 - 25% - settling time = 5125ms (around 0.2Hz)
0b0101 - 20% - settling time = 6355ms (around 0.15Hz)
0b0110 - 17% - settling time = 7790ms (around 0.13Hz)
0b0111 - 14% - settling time = 9225ms (around 0.1Hz)
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Crt Mori <cmo@melexis.com>
Link: https://lore.kernel.org/r/20230510102251.10118-6-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Factor out all the differences between MLX90614 and other similar chips
into a structure which describes the chip and allows abstracting out the
differences from the driver code. No functional change.
This patch moves all the RAM and EEPROM IO opcodes into the descriptor
structure and combines them, instead of combining the opcode and offset
in macros.
Acked-by: Crt Mori <cmo@melexis.com>
Tested-by: Crt Mori <cmo@melexis.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20230510102251.10118-5-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The MLX90614_CONST_EMISSIVITY_RESOLUTION can be calculated from
MLX90614_CONST_RAW_EMISSIVITY_MAX, perform the calculation inline
and drio the MLX90614_CONST_EMISSIVITY_RESOLUTION.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Crt Mori <cmo@melexis.com>
Link: https://lore.kernel.org/r/20230510102251.10118-4-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
To simplify addition of support for new parts, drop unused register macros.
No functional change.
Acked-by: Crt Mori <cmo@melexis.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20230510102251.10118-3-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Sort the headers alphabetically. No functional change.
Acked-by: Crt Mori <cmo@melexis.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20230510102251.10118-2-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Document support for MLX90615 Infra Red Thermometer, which seems to
be the predecesor of MLX90614 . There are significant differences in
the register layout compared to MLX90614, but the functionality of
the device is virtually identical.
Acked-by: Crt Mori <cmo@melexis.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20230510102251.10118-1-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Check physical PFN is valid before converting the PFN to a struct page
pointer to be returned to caller of vfio_pin_pages().
vfio_pin_pages() pins user pages with contiguous IOVA.
If the IOVA of a user page to be pinned belongs to vma of vm_flags
VM_PFNMAP, pin_user_pages_remote() will return -EFAULT without returning
struct page address for this PFN. This is because usually this kind of PFN
(e.g. MMIO PFN) has no valid struct page address associated.
Upon this error, vaddr_get_pfns() will obtain the physical PFN directly.
While previously vfio_pin_pages() returns to caller PFN arrays directly,
after commit
34a255e676 ("vfio: Replace phys_pfn with pages for vfio_pin_pages()"),
PFNs will be converted to "struct page *" unconditionally and therefore
the returned "struct page *" array may contain invalid struct page
addresses.
Given current in-tree users of vfio_pin_pages() only expect "struct page *
returned, check PFN validity and return -EINVAL to let the caller be
aware of IOVAs to be pinned containing PFN not able to be returned in
"struct page *" array. So that, the caller will not consume the returned
pointer (e.g. test PageReserved()) and avoid error like "supervisor read
access in kernel mode".
Fixes: 34a255e676 ("vfio: Replace phys_pfn with pages for vfio_pin_pages()")
Cc: Sean Christopherson <seanjc@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20230519065843.10653-1-yan.y.zhao@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This adds support for handling background operations, as defined in
the CXL 3.0 spec. Commands that can take too long (over ~2 seconds)
can run in the background asynchronously (to the hardware).
The driver will deal with such commands synchronously, blocking all
other incoming commands for a specified period of time, allowing
time-slicing the command such that the caller can send incremental
requests to avoid monopolizing the driver/device. Any out of sync
(timeout) between the driver and hardware is just disregarded as
an invalid state until the next successful submission. Such timeouts
are considered a rare occurrence, either a real device problem or a
driver issue that needs to reduce the size of the background operation
to fit the timeout.
On devices where mbox interrupts are supported, this will still use
a poller that will wakeup in the specified wait intervals. The irq
handler will simply awake the blocked cmd, which is also safe vs a
task that is either waking (timing out) or already awoken. Similarly
any irq setup error during the probing falls back to polling, thus
avoids unnecessarily erroring out.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20230523170927.20685-5-dave@stgolabs.net
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Factor out common functionality/semantics for cxl shared interrupts
into a new helper on top of devm_request_irq().
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20230523170927.20685-4-dave@stgolabs.net
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Move the cxl_alloc_irq_vectors() call further up in the probing
in order to allow for mailbox interrupt usage. No change in
semantics.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20230523170927.20685-3-dave@stgolabs.net
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The rcuwait utility provides an efficient and safe single
wait/wake mechanism. It is used in situations where queued
wait is the wrong semantics, and often too bulky. For example,
cases where the wait is already done under a lock.
In the past, rcuwait has been extended to support beyond only
uninterruptible sleep, and similarly, there are users that can
benefit for the addition of timeouts.
As such, tntroduce rcuwait_wait_event_timeout(), with semantics
equivalent to calls for queued wait counterparts.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20230523170927.20685-2-dave@stgolabs.net
Signed-off-by: Dan Williams <dan.j.williams@intel.com>