Add the missing word "and".
Cc: Damien Le Moal <dlemoal@kernel.org>
Suggested-by: Damien Le Moal <dlemoal@kernel.org>
Fixes: 945ffb60c1 ("mq-deadline: add blk-mq adaptation of the deadline IO scheduler")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230517174230.897144-2-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.4
- More device quirks (Sagi, Hristo, Adrian, Daniel)
- Controller delete race (Maurizo)
- Multipath cleanup fix (Christoph)"
* tag 'nvme-6.4-2023-05-18' of git://git.infradead.org/nvme:
nvme-pci: Add quirk for Teamgroup MP33 SSD
nvme: do not let the user delete a ctrl before a complete initialization
nvme-multipath: don't call blk_mark_disk_dead in nvme_mpath_remove_disk
nvme-pci: clamp max_hw_sectors based on DMA optimized limitation
nvme-pci: add quirk for missing secondary temperature thresholds
nvme-pci: add NVME_QUIRK_BOGUS_NID for HS-SSD-FUTURE 2048G
In case of q->elevator, passthrough request can still be marked as
RQF_ELV, so some elevator callbacks will be called for them.
Fix this by splitting RQF_SCHED_TAGS, which is set for all requests that
are issued on a queue that uses an I/O scheduler, and RQF_USE_SCHED for
non-flush, non-passthrough requests on such a queue.
Roughly based on two different patches from
Ming Lei <ming.lei@redhat.com>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230518053101.760632-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
RQF_ELVPRIV is set for all non-flush requests that have RQF_ELV set.
Expand this condition in the two users of the flag and remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230518053101.760632-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Passthrough requests should never be queued to the I/O scheduler,
as scheduling these opaque requests doesn't make sense, and I/O
schedulers might require req->bio to be always valid.
We never let passthrough requests insert into the scheduler before
commit 1c2d2fff6d ("block: wire-up support for passthrough plugging"),
restore this behavior even for passthrough requests issued under a plug.
[hch: use blk_mq_insert_requests for passthrough requests,
fix up the commit message and comments]
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Closes: https://lore.kernel.org/linux-block/CAGS2=YosaYaUTEMU3uaf+y=8MqSrhL7sYsJn8EwbaM=76p_4Qg@mail.gmail.com/
Investigated-by: Yu Kuai <yukuai1@huaweicloud.com>
Fixes: 1c2d2fff6d ("block: wire-up support for passthrough plugging")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230518053101.760632-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
See also:
* Commit 4d337cebcb ("blk-mq: avoid to touch q->elevator without any protection").
* Commit 414dd48e88 ("blk-mq: add tagset quiesce interface").
Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230518222708.1190867-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
amd-drm-fixes-6.4-2023-05-18:
amdgpu:
- update gfx11 clock counter logic
- Fix a race when disabling gfxoff on gfx10/11 for profiling
- Raven/Raven2/PCO clock counter fix
- Add missing get_vbios_fb_size for GMC 11
- Fix a spurious irq warning in the device remove case
- Fix possible power mode mismatch between driver and PMFW
- USB4 fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230518174811.3841-1-alexander.deucher@amd.com
msm-fixes for v6.4-rc3
Display Fixes:
+ Catalog fixes:
- fix the programmable fetch lines and qos settings of msm8998
to match what is present downstream
- fix the LM pairs for msm8998 to match what is present downstream.
The current settings are not right as LMs with incompatible
connected blocks are paired
- remove unused INTF0 interrupt mask from SM6115/QCM2290 as there
is no INTF0 present on those chipsets. There is only one DSI on
index 1
- remove TE2 block from relevant chipsets because this is mainly
used for ping-pong split feature which is not supported upstream
and also for the chipsets where we are removing them in this
change, that block is not present as the tear check has been moved
to the intf block
- relocate non-MDP_TOP INTF_INTR offsets from dpu_hwio.h to
dpu_hw_interrupts.c to match where they belong
- fix the indentation for REV_7xxx interrupt masks
- fix the offset and version for dither blocks of SM8[34]50/SC8280XP
chipsets as it was incorrect
- make the ping-pong blk length 0 for appropriate chipsets as those
chipsets only have a dither ping-pong dither block but no other
functionality in the base ping-pong
- remove some duplicate register defines from INTF
+ Fix the log mask for the writeback block so that it can be enabled
correctly via debugfs
+ unregister the hdmi codec for dp during unbind otherwise it leaks
audio codec devices
+ Yaml change to fix warnings related to 'qcom,master-dsi' and
'qcom,sync-dual-dsi'
GPU Fixes:
+ fix submit error path leak
+ arm-smmu-qcom fix for regression that broke per-process page tables
+ fix no-iommu crash
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvHEcJfp=k6qatmb_SvAeyvy3CBpaPfwLqtNthuEzA_7w@mail.gmail.com
Add a quirk for Teamgroup MP33 that reports duplicate ids for disk.
Signed-off-by: Daniel Smith <dansmith@ds.gy>
[kch: patch formatting]
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Daniel Smith <dansmith@ds.gy>
Signed-off-by: Keith Busch <kbusch@kernel.org>
BACKGROUND
==========
When multiple work items are queued to a workqueue, their execution order
doesn't match the queueing order. They may get executed in any order and
simultaneously. When fully serialized execution - one by one in the queueing
order - is needed, an ordered workqueue should be used which can be created
with alloc_ordered_workqueue().
However, alloc_ordered_workqueue() was a later addition. Before it, an
ordered workqueue could be obtained by creating an UNBOUND workqueue with
@max_active==1. This originally was an implementation side-effect which was
broken by 4c16bd327c ("workqueue: restore WQ_UNBOUND/max_active==1 to be
ordered"). Because there were users that depended on the ordered execution,
5c0338c687 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
made workqueue allocation path to implicitly promote UNBOUND workqueues w/
@max_active==1 to ordered workqueues.
While this has worked okay, overloading the UNBOUND allocation interface
this way creates other issues. It's difficult to tell whether a given
workqueue actually needs to be ordered and users that legitimately want a
min concurrency level wq unexpectedly gets an ordered one instead. With
planned UNBOUND workqueue updates to improve execution locality and more
prevalence of chiplet designs which can benefit from such improvements, this
isn't a state we wanna be in forever.
This patch series audits all callsites that create an UNBOUND workqueue w/
@max_active==1 and converts them to alloc_ordered_workqueue() as necessary.
WHAT TO LOOK FOR
================
The conversions are from
alloc_workqueue(WQ_UNBOUND | flags, 1, args..)
to
alloc_ordered_workqueue(flags, args...)
which don't cause any functional changes. If you know that fully ordered
execution is not ncessary, please let me know. I'll drop the conversion and
instead add a comment noting the fact to reduce confusion while conversion
is in progress.
If you aren't fully sure, it's completely fine to let the conversion
through. The behavior will stay exactly the same and we can always
reconsider later.
As there are follow-up workqueue core changes, I'd really appreciate if the
patch can be routed through the workqueue tree w/ your acks. Thanks.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-media@vger.kernel.org
- Fix below build warning by marking them as 'static inline'
drivers/gpu/drm/exynos/exynos_drm_g2d.h:37:5: error: no previous prototype for 'g2d_open'
drivers/gpu/drm/exynos/exynos_drm_g2d.h:42:5: error: no previous prototype for 'g2d_close'
-----BEGIN PGP SIGNATURE-----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=OWiW
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-fixes-for-v6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
Just one fixup to exynos_drm_g2d module.
- Fix below build warning by marking them as 'static inline'
drivers/gpu/drm/exynos/exynos_drm_g2d.h:37:5: error: no previous prototype for 'g2d_open'
drivers/gpu/drm/exynos/exynos_drm_g2d.h:42:5: error: no previous prototype for 'g2d_close'
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230515083943.43933-1-inki.dae@samsung.com
BACKGROUND
==========
When multiple work items are queued to a workqueue, their execution order
doesn't match the queueing order. They may get executed in any order and
simultaneously. When fully serialized execution - one by one in the queueing
order - is needed, an ordered workqueue should be used which can be created
with alloc_ordered_workqueue().
However, alloc_ordered_workqueue() was a later addition. Before it, an
ordered workqueue could be obtained by creating an UNBOUND workqueue with
@max_active==1. This originally was an implementation side-effect which was
broken by 4c16bd327c ("workqueue: restore WQ_UNBOUND/max_active==1 to be
ordered"). Because there were users that depended on the ordered execution,
5c0338c687 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
made workqueue allocation path to implicitly promote UNBOUND workqueues w/
@max_active==1 to ordered workqueues.
While this has worked okay, overloading the UNBOUND allocation interface
this way creates other issues. It's difficult to tell whether a given
workqueue actually needs to be ordered and users that legitimately want a
min concurrency level wq unexpectedly gets an ordered one instead. With
planned UNBOUND workqueue updates to improve execution locality and more
prevalence of chiplet designs which can benefit from such improvements, this
isn't a state we wanna be in forever.
This patch series audits all callsites that create an UNBOUND workqueue w/
@max_active==1 and converts them to alloc_ordered_workqueue() as necessary.
WHAT TO LOOK FOR
================
The conversions are from
alloc_workqueue(WQ_UNBOUND | flags, 1, args..)
to
alloc_ordered_workqueue(flags, args...)
which don't cause any functional changes. If you know that fully ordered
execution is not ncessary, please let me know. I'll drop the conversion and
instead add a comment noting the fact to reduce confusion while conversion
is in progress.
If you aren't fully sure, it's completely fine to let the conversion
through. The behavior will stay exactly the same and we can always
reconsider later.
As there are follow-up workqueue core changes, I'd really appreciate if the
patch can be routed through the workqueue tree w/ your acks. Thanks.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Arnaud Ebalard <arno@natisbad.org>
Cc: Srujana Challa <schalla@marvell.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Shijith Thotton <sthotton@marvell.com>
Cc: Vladis Dronov <vdronov@redhat.com>
Cc: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Alexander Lobakin <alobakin@pm.me>
Cc: Minghao Chi <chi.minghao@zte.com.cn>
Cc: ye xingchen <ye.xingchen@zte.com.cn>
Cc: linux-crypto@vger.kernel.org
BACKGROUND
==========
When multiple work items are queued to a workqueue, their execution order
doesn't match the queueing order. They may get executed in any order and
simultaneously. When fully serialized execution - one by one in the queueing
order - is needed, an ordered workqueue should be used which can be created
with alloc_ordered_workqueue().
However, alloc_ordered_workqueue() was a later addition. Before it, an
ordered workqueue could be obtained by creating an UNBOUND workqueue with
@max_active==1. This originally was an implementation side-effect which was
broken by 4c16bd327c ("workqueue: restore WQ_UNBOUND/max_active==1 to be
ordered"). Because there were users that depended on the ordered execution,
5c0338c687 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
made workqueue allocation path to implicitly promote UNBOUND workqueues w/
@max_active==1 to ordered workqueues.
While this has worked okay, overloading the UNBOUND allocation interface
this way creates other issues. It's difficult to tell whether a given
workqueue actually needs to be ordered and users that legitimately want a
min concurrency level wq unexpectedly gets an ordered one instead. With
planned UNBOUND workqueue updates to improve execution locality and more
prevalence of chiplet designs which can benefit from such improvements, this
isn't a state we wanna be in forever.
This patch series audits all callsites that create an UNBOUND workqueue w/
@max_active==1 and converts them to alloc_ordered_workqueue() as necessary.
WHAT TO LOOK FOR
================
The conversions are from
alloc_workqueue(WQ_UNBOUND | flags, 1, args..)
to
alloc_ordered_workqueue(flags, args...)
which don't cause any functional changes. If you know that fully ordered
execution is not ncessary, please let me know. I'll drop the conversion and
instead add a comment noting the fact to reduce confusion while conversion
is in progress.
If you aren't fully sure, it's completely fine to let the conversion
through. The behavior will stay exactly the same and we can always
reconsider later.
As there are follow-up workqueue core changes, I'd really appreciate if the
patch can be routed through the workqueue tree w/ your acks. Thanks.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Kalle Valo <kvalo@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver. With regmap we get boundary checks, read-write
permissions, operation synchronization locks, and more for free. Most
important of all, rather than rolling our own we utilize implementations
that are known to work and gain from any future improvements and fixes
that come.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/1f1f7920d2be94aedb6fdf49f429fe6137c8cb24.1681753140.git.william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
The 104-quad-8 driver buffers the device configuration states
separately, however each device has only three control registers: CMR,
IOR, and IDR. Refactoring to buffer the states of these control
registers rather than each configuration separately results in succinct
code that more closely matches what is happening on the device.
Link: https://lore.kernel.org/r/48071415aed43ecdd8595174191b0d906205a9e3.1681753140.git.william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
These workqueues only host a single work item and thus doen't need explicit
concurrency limit. Let's use the default @max_active. This doesn't cost
anything and clearly expresses that @max_active doesn't matter.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Acked-by: Kalle Valo <kvalo@kernel.org>
Cc: Amitkumar Karwar <amitkarwar@gmail.com>
Cc: Ganapathi Bhat <ganapathi017@gmail.com>
Cc: Sharvari Harisangam <sharvari.harisangam@nxp.com>
Cc: Xinming Hu <huxinming820@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
dev_dax_probe declaration for this function was removed with the only
caller outside of device.c. Mark it static to avoid a W=1
warning:
drivers/dax/device.c:399:5: error: no previous prototype for 'dev_dax_probe'
Similarly, run_dax() causes a warning, but this one is because the
declaration needs to be included:
drivers/dax/super.c:337:6: error: no previous prototype for 'run_dax'
Fixes: 83762cb5c7 ("dax: Kill DEV_DAX_PMEM_COMPAT")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230517125532.931157-1-arnd@kernel.org
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
issues, or aren't considered suitable for backporting.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZGasdgAKCRDdBJ7gKXxA
jpTFAQC2WlV6CbEsy46jJK2XzCypzLLxHiRmVCw5pmAucki4awEAjllEuzK6vw61
ytBZ/O2sMB5AbCf31c6UYxgLS32oyAo=
=IDcO
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-05-18-15-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Eight hotfixes. Four are cc:stable, the other four are for post-6.4
issues, or aren't considered suitable for backporting"
* tag 'mm-hotfixes-stable-2023-05-18-15-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
MAINTAINERS: Cleanup Arm Display IP maintainers
MAINTAINERS: repair pattern in DIALOG SEMICONDUCTOR DRIVERS
nilfs2: fix use-after-free bug of nilfs_root in nilfs_evict_inode()
mm: fix zswap writeback race condition
mm: kfence: fix false positives on big endian
zsmalloc: move LRU update from zs_map_object() to zs_malloc()
mm: shrinkers: fix race condition on debugfs cleanup
maple_tree: make maple state reusable after mas_empty_area()
Move cxl_await_media_ready() to cxl_pci probe before driver starts issuing
IDENTIFY and retrieving memory device information to ensure that the
device is ready to provide the information. Allow cxl_pci_probe() to succeed
even if media is not ready. Cache the media failure in cxlds and don't ask
the device for any media information.
The rationale for proceeding in the !media_ready case is to allow for
mailbox operations to interrogate and/or remediate the device. After
media is repaired then rebinding the cxl_pci driver is expected to
restart the capacity scan.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Fixes: b39cb1052a ("cxl/mem: Register CXL memX devices")
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/168445310026.3251520.8124296540679268206.stgit@djiang5-mobl3
[djbw: fixup cxl_test]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The Memory_Info_Valid bit (CXL 3.0 8.1.3.8.2) indicates that the CXL
Range Size High and Size Low registers are valid. The bit must be set
within 1 second of reset deassertion to the device. Check valid bit
before we check the Memory_Active bit when waiting for
cxl_await_media_ready() to ensure that the memory info is valid for
consumption. Also ensures both DVSEC ranges 1 and 2 are ready if DVSEC
Capability indicates they are both supported.
Fixes: 523e594d9c ("cxl/pci: Implement wait for media active")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/168444687469.3134781.11033518965387297327.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Read syscall cannot response to sigals when data_to_read remains at 0
and the while loop cannot break. Check signal_pending in the loop.
Reported-by: Zhen Ni <zhen.ni@easystack.cn>
Message-Id: <20230517085412.367022-1-zhen.ni@easystack.cn>
Signed-off-by: Corey Minyard <minyard@acm.org>
Merge series from Paweł Anikiel <pan@semihalf.com>:
The Google Chameleon v3 is a device made for testing audio and video
paths of other devices. This patchset adds support for ASoC audio on
this device. It has two audio sources: HDMI audio from the it68051 chip
(RX only), and analog audio from the ssm2603 chip (RX and TX).
The patchset adds the ASoC platform and codec drivers.
Previously pci_enable_link_state(PCIE_LINK_STATE_L1) enabled L1SS as well
as L1. Enable only ASPM_STATE_L1 when the caller enables L1.
The only current caller is vmd_pm_enable_quirk(), which enables *all* ASPM
states, so this should have no functional effect.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20230504111301.229358-3-ajayagarwal@google.com
Signed-off-by: Ajay Agarwal <ajayagarwal@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Previously pci_disable_link_state(PCIE_LINK_STATE_L1) disabled L1SS as well
as L1. This is unnecessary since pcie_config_aspm_link() takes care that
L1SS is not enabled if L1 is disabled.
Disable only ASPM_STATE_L1 when the caller disables L1. No functional
changes intended.
This is consistent with aspm_attr_store_common(), which disables only L1,
not L1SS, when L1 is disabled via the sysfs "l1_aspm" file.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20230504111301.229358-2-ajayagarwal@google.com
Signed-off-by: Ajay Agarwal <ajayagarwal@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Conflicts:
drivers/net/ethernet/freescale/fec_main.c
6ead9c98ca ("net: fec: remove the xdp_return_frame when lack of tx BDs")
144470c88c ("net: fec: using the standard return codes when xdp xmit errors")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some boards form the MangoPi family (MQ\MQ-Dual\MQ-R) may have
an optional SPI flash that connects to the SPI0 controller.
This controller is the same for R329/D1/R528/T113s SoCs and
should be supported by the sun50i-r329-spi driver.
So let's add its DT nodes.
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230510081121.3463710-6-bigunclemax@gmail.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Struct pcie_link_state->downstream is a pointer to the pci_dev of function
0. Previously we retained that pointer when removing function 0, and
subsequent ASPM policy changes dereferenced it, resulting in a
use-after-free warning from KASAN, e.g.:
# echo 1 > /sys/bus/pci/devices/0000:03:00.0/remove
# echo powersave > /sys/module/pcie_aspm/parameters/policy
BUG: KASAN: slab-use-after-free in pcie_config_aspm_link+0x42d/0x500
Call Trace:
kasan_report+0xae/0xe0
pcie_config_aspm_link+0x42d/0x500
pcie_aspm_set_policy+0x8e/0x1a0
param_attr_store+0x162/0x2c0
module_attr_store+0x3e/0x80
PCIe spec r6.0, sec 7.5.3.7, recommends that software program the same ASPM
Control value in all functions of multi-function devices.
Disable ASPM and free the pcie_link_state when any child function is
removed so we can discard the dangling pcie_link_state->downstream pointer
and maintain the same ASPM Control configuration for all functions.
[bhelgaas: commit log and comment]
Debugged-by: Zongquan Qin <qinzongquan@sangfor.com.cn>
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Fixes: b5a0a9b59c ("PCI/ASPM: Read and set up L1 substate capabilities")
Link: https://lore.kernel.org/r/20230507034057.20970-1-dinghui@sangfor.com.cn
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
While the rate of TCON0's DCLK matches dotclock for parallel and LVDS
outputs, this doesn't hold for DSI. According manuals from Allwinner,
DCLK is an abbreviation of Data Clock, not dotclock, so go with that
instead.
Signed-off-by: Roman Beranek <me@crly.cz>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20230505052110.67514-3-me@crly.cz
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
TCON0's source clock can be fed from either PLL_MIPI, or PLL_VIDEO0(2X),
however MIPI DSI output only seems to work when PLL_MIPI is selected and
thus the choice must be hardcoded in.
Currently, this driver can't propagate rate change from N-K-M clocks
(such as PLL_MIPI) upwards. This prevents PLL_VIDEO0 from participating
in setting of the TCON0 data clock rate, limiting the precision with
which a target pixel clock can be matched.
For outputs with fixed TCON0 divider, that is DSI and LVDS, the dotclock
can deviate up to 8% off target.
Signed-off-by: Roman Beranek <me@crly.cz>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20230505052110.67514-2-me@crly.cz
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
-----BEGIN PGP SIGNATURE-----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=ffn4
-----END PGP SIGNATURE-----
Merge tag 'nf-next-2023-05-18' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
Netfilter updates for net-next
nftables updates:
1. Allow key existence checks with maps.
At the moment the kernel requires userspace to pass a destination
register for the associated value, make this optional so userspace
can query if the key exists, just like with normal sets.
2. nftables maintains a counter per set that holds the number of
elements. This counter gets decremented on element removal,
but its only incremented if the set has a upper maximum value.
Increment unconditionally, this will allow us to update the
maximum value later on.
3. At DCCP option maching, from Jeremy Sowden.
4. use struct_size macro, from Christophe JAILLET.
Conntrack:
5. Squash holes in struct nf_conntrack_expect, also Christophe JAILLET.
6. Allow clash resolution for GRE Protocol to avoid a packet drop,
from Faicker Mo.
Flowtable:
Simplify route logic and split large functions into smaller
chunks, from Pablo Neira Ayuso.
* tag 'nf-next-2023-05-18' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: flowtable: split IPv6 datapath in helper functions
netfilter: flowtable: split IPv4 datapath in helper functions
netfilter: flowtable: simplify route logic
netfilter: conntrack: allow insertion clash of gre protocol
netfilter: nft_set_pipapo: Use struct_size()
netfilter: Reorder fields in 'struct nf_conntrack_expect'
netfilter: nft_exthdr: add boolean DCCP option matching
netfilter: nf_tables: always increment set element count
netfilter: nf_tables: relax set/map validation checks
====================
Link: https://lore.kernel.org/r/20230518100759.84858-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Derick noticed, when testing hot plug, that hot-add behaves nominally
after a removal. However, if the hot-add is done without a prior
removal, CXL.mem accesses fail. It turns out that the original
implementation of the port driver and region programming wrongly assumed
that platform-firmware always enables the host-bridge HDM decoder
capability. Add support turning on switch-level HDM decoders in the case
where platform-firmware has not.
The implementation is careful to only arrange for the enable to be
undone if the current instance of the driver was the one that did the
enable. This is to interoperate with platform-firmware that may expect
CXL.mem to remain active after the driver is shutdown. This comes at the
cost of potentially not shutting down the enable on kexec flows, but it
is mitigated by the fact that the related HDM decoders still need to be
enabled on an individual basis.
Cc: <stable@vger.kernel.org>
Reported-by: Derick Marks <derick.w.marks@intel.com>
Fixes: 54cdbf845c ("cxl/port: Add a driver for 'struct cxl_port' objects")
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/168437998331.403037.15719879757678389217.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
There are two functions in the olpc platform that have no prototype:
arch/x86/platform/olpc/olpc_dt.c:237:13: error: no previous prototype for 'olpc_dt_fixup' [-Werror=missing-prototypes]
arch/x86/platform/olpc/olpc-xo1-pm.c:73:26: error: no previous prototype for 'xo1_do_sleep' [-Werror=missing-prototypes]
The first one should just be marked 'static' as there are no other
callers, while the second one is called from assembler and is
just a false-positive warning that can be silenced by adding a
prototype.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/all/20230516193549.544673-21-arnd%40kernel.org
early_memremap_pgprot_adjust() is a __weak function with a local
prototype, but x86 has a custom implementation that does not
see the prototype, causing a W=1 warning:
arch/x86/mm/ioremap.c:785:17: error: no previous prototype for 'early_memremap_pgprot_adjust' [-Werror=missing-prototypes]
Move the declaration into the global linux/io.h header to avoid this.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/all/20230516193549.544673-19-arnd%40kernel.org
arch_wb_cache_pmem() is declared in a global header but defined by
the architecture. On x86, the implementation needs to include the header
to avoid this warning:
arch/x86/lib/usercopy_64.c:39:6: error: no previous prototype for 'arch_wb_cache_pmem' [-Werror=missing-prototypes]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/all/20230516193549.544673-18-arnd%40kernel.org
__vdso_getcpu is declared in a header but this is not included
before the definition, causing a W=1 warning:
arch/x86/entry/vdso/vgetcpu.c:13:1: error: no previous prototype for '__vdso_getcpu' [-Werror=missing-prototypes]
arch/x86/entry/vdso/vdso32/../vgetcpu.c:13:1: error: no previous prototype for '__vdso_getcpu' [-Werror=missing-prototypes]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/all/20230516193549.544673-17-arnd%40kernel.org
copy_mc_fragile_handle_tail() is only called from assembler,
but 'make W=1' complains about a missing prototype:
arch/x86/lib/copy_mc.c:26:1: warning: no previous prototype for ‘copy_mc_fragile_handle_tail’ [-Wmissing-prototypes]
26 | copy_mc_fragile_handle_tail(char *to, char *from, unsigned len)
Add the prototype to avoid the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/all/20230516193549.544673-16-arnd%40kernel.org
fb_is_primary_device() is defined as a global function on x86, unlike
the others that have an inline version. The file that defines is
however needs to include the declaration to avoid a warning:
arch/x86/video/fbdev.c:14:5: error: no previous prototype for 'fb_is_primary_device' [-Werror=missing-prototypes]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/all/20230516193549.544673-15-arnd%40kernel.org
Three functions that are defined in x86 specific code to override
generic __weak implementations cause a warning because of a missing
prototype:
arch/x86/power/cpu.c:298:5: error: no previous prototype for 'hibernate_resume_nonboot_cpu_disable' [-Werror=missing-prototypes]
arch/x86/power/hibernate.c:129:5: error: no previous prototype for 'arch_hibernation_header_restore' [-Werror=missing-prototypes]
arch/x86/power/hibernate.c:91:5: error: no previous prototype for 'arch_hibernation_header_save' [-Werror=missing-prototypes]
Move the declarations into a global header so it can be included
by any file defining one of these.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/all/20230516193549.544673-14-arnd%40kernel.org
The 32-bit system call entry points can be called on both 32-bit
and 64-bit kernels, but on the former the declarations are hidden:
arch/x86/entry/common.c:238:24: error: no previous prototype for 'do_SYSENTER_32' [-Werror=missing-prototypes]
Move them all out of the #ifdef block to avoid the warnings.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/all/20230516193549.544673-12-arnd%40kernel.org
arch_pnpbios_disabled() is defined in architecture code on x86, but this
does not include the appropriate header, causing a warning:
arch/x86/kernel/platform-quirks.c:42:13: error: no previous prototype for 'arch_pnpbios_disabled' [-Werror=missing-prototypes]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/all/20230516193549.544673-10-arnd%40kernel.org
The set_highmem_pages_init() function is declared in asm/numa.h, which
must be included in the file that defines it to avoid a W=1 warning:
arch/x86/mm/highmem_32.c:7:13: error: no previous prototype for 'set_highmem_pages_init' [-Werror=missing-prototypes]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/all/20230516193549.544673-9-arnd%40kernel.org
Two functions in the 32-bit doublefault code are lacking a prototype:
arch/x86/kernel/doublefault_32.c:23:36: error: no previous prototype for 'doublefault_shim' [-Werror=missing-prototypes]
23 | asmlinkage noinstr void __noreturn doublefault_shim(void)
| ^~~~~~~~~~~~~~~~
arch/x86/kernel/doublefault_32.c:114:6: error: no previous prototype for 'doublefault_init_cpu_tss' [-Werror=missing-prototypes]
114 | void doublefault_init_cpu_tss(void)
The first one is only called from assembler, while the second one is
declared in doublefault.h, but this file is not included.
Include the header file and add the other declaration there as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/all/20230516193549.544673-8-arnd%40kernel.org
The fpregs_soft_set/fpregs_soft_get functions are declared in a
header that is not included in the file that defines them, causing
a W=1 warning:
/home/arnd/arm-soc/arch/x86/math-emu/fpu_entry.c:638:5: error: no previous prototype for 'fpregs_soft_set' [-Werror=missing-prototypes]
638 | int fpregs_soft_set(struct task_struct *target,
| ^~~~~~~~~~~~~~~
/home/arnd/arm-soc/arch/x86/math-emu/fpu_entry.c:690:5: error: no previous prototype for 'fpregs_soft_get' [-Werror=missing-prototypes]
690 | int fpregs_soft_get(struct task_struct *target,
Include the file here to avoid the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/all/20230516193549.544673-7-arnd%40kernel.org