In igb_hash_mc_addr() the expression:
"mc_addr[4] >> 8 - bit_shift", right shifting "mc_addr[4]"
shift by more than 7 bits always yields zero, so hash becomes not so different.
Add initialization with bit_shift = 1 and add a loop condition to ensure
bit_shift will be always in [1..8] range.
Fixes: 9d5c824399 ("igb: PCI-Express 82575 Gigabit Ethernet driver")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony nguyen says:
====================
Intel Wired LAN Driver Updates 2023-05-16
This series contains updates to ice and iavf drivers.
Ahmed adds setting of missed condition for statistics which caused
incorrect reporting of values for ice. For iavf, he removes a call to set
VLAN offloads during re-initialization which can cause incorrect values
to be set.
Dawid adds checks to ensure VF is ready to be reset before executing
commands that will require it to be reset on ice.
---
v2:
Patch 2
- Redo commit message
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Due to the firmware behavior with HT fixed rate setting,
HT fixed rate MCS with NSS > 1 are treated as NSS = 1
HT rates in the firmware and enables the HT fixed rate of
NSS = 1.
This leads to HT fixed rate is always configured for NSS = 1
even though the user sets NSS = 2 or > 1 HT fixed MCS in the
set bitrate command.
Currently HT fixed MCS is sent via WMI peer assoc command.
Fix this issue, by sending the HT fixed rate MCS in WMI peer
fixed param instead of sending in peer assoc command.
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Signed-off-by: Maharaja Kennadyrajan <quic_mkenna@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230504092033.3542456-3-quic_mkenna@quicinc.com
Relocate the function ath11k_mac_bitrate_mask_num_ht_rates() definition
to call this function from other functions which helps to avoid the
compilation error (function not defined).
ht_mcs[] is 1 byte array and it is enough to use hweight8() instead
of hweight16(). Hence, fixed the same.
Tested on: Compile tested only.
Signed-off-by: Maharaja Kennadyrajan <quic_mkenna@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230504092033.3542456-2-quic_mkenna@quicinc.com
When vdev start/stop happens, response from firmware is received with delay
and hence there is a timeout before VDEV can be up/down.
Also, with maximum peers connected and when vdev stop occurs, firmware
will take time to clean up all the peers and vap queues.
In such cases as well, vdev start/stop response is sent by firmware with delay.
Increase the vdev setup timeout as recommended by firmware team.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0-02903-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aishwarya R <quic_aisr@quicinc.com>
Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230428091041.20033-1-quic_rgnanase@quicinc.com
Add support for the new qcm2290 / sm6115 binding.
The USB QMP phy on these devices supports 2 lanes. Note that the
binding now does not describe every register subregion and instead
the driver holds the corresponding offsets.
While at it also include support for PCS_MISC region which was left
out earlier.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20230516150511.2346357-3-bhupesh.sharma@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
'qcom,msm8996-qmp-usb3-phy.yaml' defines bindings for several PHYs
which predate USB -> USB+DP migration. Since SM6115 and QCM2290
nodes for USB QMP phy are being added to dtsi files by followup patches,
move these bindings instead to the newer style
'qcom,sc8280xp-qmp-usb3-uni-phy.yaml' file.
Since no device trees use these bindings presently, so we have no ABI breakages
with this patch.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20230516150511.2346357-2-bhupesh.sharma@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Manivannan has been very active in reviewing the bits coming to the DW
eDMA driver. Let's add him to the driver maintainers list.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230511190902.28896-14-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
No maintaining actions from Gustavo have been noticed for over a year.
Demote him to being the DW eDMA driver reviewer for now.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230511190902.28896-13-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
I meant to sort the includes before submitting commit 2b874a0278
("drm/i915/irq: split out display irq handling") but forgot, and it
wasn't noticed in review either. Sort the includes.
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230516122926.2720581-1-jani.nikula@intel.com
Detect whether macsec secy is running on top of VLAN
which implies transmitting VLAN tag in clear text before
macsec SecTag. In this case configure hardware to insert
SecTag after VLAN tag.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to datasheet, the command opcode must be specified
into bits [14:12] of the Extended Port Control register (EPC).
Fixes: de776d0d31 ("net: dsa: mv88e6xxx: add support for mv88e6393x family")
Signed-off-by: Marco Migliore <m.migliore@tiesse.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
cas_saturn_firmware_init() allocates some memory using vmalloc(). This
memory is freed in the .remove() function but not it the error handling
path of the probe.
Add the missing vfree() to avoid a memory leak, should an error occur.
Fixes: fcaa40669c ("cassini: use request_firmware")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TSSI is transmitter signal strength indication, which is a close-loop
hardware circuit to feedback actual transmitting power as a reference for
next transmission.
When we setup channel to connect an AP, it does full calibration. When
switching bands or channels, it needs to reset hardware status to prevent
use wrong feedback of previous transmission.
To do TX power compensation reflecting current temperature, it loads tables
of compensation values into registers according to channel and band group.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230513054425.9689-4-pkshih@realtek.com
DPK is short for digital pre-distortion calibration. It can adjusts digital
waveform according to PA linear characteristics dynamically to enhance
TX EVM.
Do this calibration when we are going to run on AP channel. To prevent
power offset out of boundary, it monitors thermal and set proper boundary
to register.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230513054425.9689-3-pkshih@realtek.com
RX DCK is receiver DC calibration. With this calibration, we have proper
DC offset to reflect correct received signal strength indicator. Do this
calibration when bringing up interface and going to run on AP channel.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230513054425.9689-2-pkshih@realtek.com
Parse efuse content to recognize MAC address, RFE type, XTAL offset and
so on. And, parse offset of PHY capability to retrieve TX power
calibration data.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230512061220.16544-7-pkshih@realtek.com
Set MAC/BB/RF registers according to channel we are going to set. In
additional, certain channels or bands need more deals, such as enable CCK
in 2 GHz band, spur elimination at certain frequencies.
The set channel helper is used to save/restore states before/after setting
channel, and does reset BB to prevent hardware getting stuck in abnormal
state during switching channel and receiving data.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230512061220.16544-6-pkshih@realtek.com
Add basic functions to power on chip and enable and access BB/RF, as
well as reset and hardware settings of BB.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230512061220.16544-5-pkshih@realtek.com
Add 8851B specific parameters of BT coexistence. Since 8851B has special
two antenna hardware module with antenna diversity, BT coexistence needs
to recognize this, so add some fields to store these information for
further use.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230512061220.16544-4-pkshih@realtek.com
Though 8851BE is a 1x1 chip, but it has two antenna hardware module that
needs additional configuration to help choose antenna we are going to use.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230512061220.16544-3-pkshih@realtek.com
8851B hardware version A and B use different firmware, but register version
code of these two are the same, so add this helper to read efuse version to
determine which version is installed.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230512061220.16544-2-pkshih@realtek.com
In processing IPv6 segment routing header (SRH), several functions call
skb_dst_drop before ip6_route_input. However, ip6_route_input calls
skb_dst_drop within it, so there is no need to call skb_dst_drop in advance.
Signed-off-by: Yuya Tajima <yuya.tajimaa@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge branch 'tcp-io_uring-zc-opts'
Pavel Begunkov says:
====================
minor tcp io_uring zc optimisations
Patch 1 is a simple cleanup, patch 2 gives removes 2 atomics from the
io_uring zc TCP submission path, which yielded extra 0.5% for my
throughput CPU bound tests based on liburing/examples/send-zerocopy.c
====================
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
io_uring keeps a reference to ubuf_info during submission, so if
tcp_sendmsg_locked() sees msghdr::msg_ubuf in can be sure the buffer
will be kept alive and doesn't need to additionally pin it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move tcp_write_queue_tail() to SOCK_ZEROCOPY specific flag as zerocopy
setup for msghdr->ubuf_info doesn't need to peek into the last request.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The arch_report_meminfo() function is provided by four architectures,
with a __weak fallback in procfs itself. On architectures that don't
have a custom version, the __weak version causes a warning because
of the missing prototype.
Remove the architecture specific prototypes and instead add one
in linux/proc_fs.h.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com> # for arch/x86
Acked-by: Helge Deller <deller@gmx.de> # parisc
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Message-Id: <20230516195834.551901-1-arnd@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Fix warning drivers/bus/ti-sysc.c:1806 sysc_quirk_dispc()
warn: masking a bool.
While at it let's add a comment for what were doing to make
the code a bit easier to follow.
Fixes: 7324a7a0d5 ("bus: ti-sysc: Implement display subsystem reset quirk")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-omap/a8ec8a68-9c2c-4076-bf47-09fccce7659f@kili.mountain/
Signed-off-by: Tony Lindgren <tony@atomide.com>
A couple of functions from fs/pipe.c are used both internally
and for the watch queue code, but the declaration is only
visible when the latter is enabled:
fs/pipe.c:1254:5: error: no previous prototype for 'pipe_resize_ring'
fs/pipe.c:758:15: error: no previous prototype for 'account_pipe_buffers'
fs/pipe.c:764:6: error: no previous prototype for 'too_many_pipe_buffers_soft'
fs/pipe.c:771:6: error: no previous prototype for 'too_many_pipe_buffers_hard'
fs/pipe.c:777:6: error: no previous prototype for 'pipe_is_unprivileged_user'
Make the visible unconditionally to avoid these warnings.
Fixes: c73be61ced ("pipe: Add general notification queue support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Message-Id: <20230516195629.551602-1-arnd@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
make W=1 warns about a missing prototype that is defined but
not visible at point where simple_dname() is defined:
fs/d_path.c:317:7: error: no previous prototype for 'simple_dname' [-Werror=missing-prototypes]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Message-Id: <20230516195444.551461-1-arnd@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The current code will, if we do not specify unique labels
for the SRAM subnodes, fail to register several nodes named
the same.
Example:
sram@40020000 {
(...)
sram@0 {
(...)
};
sram@1000 {
(...)
};
};
Since the child->name in both cases will be "sram" the
gen_pool_create() will fail because the name is not unique.
Use dev_name() for the device as this will have bus ID
set to the fully translated address for the node, and that
will always be unique.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230417-ux500-sram-v2-2-6e62ad551faa@linaro.org
The motivation for this patch has been to enable using a stricter
apparmor profile to prevent programs from reading any coredump in the
system.
However, this became something else. The following details are based on
Christian's and Linus' archeology into the history of the number "2" in
the coredump handling code.
To make sure we're not accidently introducing some subtle behavioral
change into the coredump code we set out on a voyage into the depths of
history.git to figure out why this was O_RDWR in the first place.
Coredump handling was introduced over 30 years ago in commit
ddc733f452e0 ("[PATCH] Linux-0.97 (August 1, 1992)").
The original code used O_WRONLY:
open_namei("core",O_CREAT | O_WRONLY | O_TRUNC,0600,&inode,NULL)
However, this changed in 1993 and starting with commit
9cb9f18b5d26 ("[PATCH] Linux-0.99.10 (June 7, 1993)") the coredump code
suddenly used the constant "2":
open_namei("core",O_CREAT | 2 | O_TRUNC,0600,&inode,NULL)
This was curious as in the same commit the kernel switched from
constants to proper defines in other places such as KERNEL_DS and
USER_DS and O_RDWR did already exist.
So why was "2" used? It turns out that open_namei() - an early version
of what later turned into filp_open() - didn't accept O_RDWR.
A semantic quirk of the open() uapi is the definition of the O_RDONLY
flag. It would seem natural to define:
#define O_RDWR (O_RDONLY | O_WRONLY)
but that isn't possible because:
#define O_RDONLY 0
This makes O_RDONLY effectively meaningless when passed to the kernel.
In other words, there has never been a way - until O_PATH at least - to
open a file without any permission; O_RDONLY was always implied on the
uapi side while the kernel does in fact allow opening files without
permissions.
The trouble comes when trying to map the uapi flags onto the
corresponding file mode flags FMODE_{READ,WRITE}. This mapping still
happens today and is causing issues to this day (We ran into this
during additions for openat2() for example.).
So the special value "3" was used to indicate that the file was opened
for special access:
f->f_flags = flag = flags;
f->f_mode = (flag+1) & O_ACCMODE;
if (f->f_mode)
flag++;
This allowed the file mode to be set to FMODE_READ | FMODE_WRITE mapping
the O_{RDONLY,WRONLY,RDWR} flags into the FMODE_{READ,WRITE} flags. The
special access then required read-write permissions and 0 was used to
access symlinks.
But back when ddc733f452e0 ("[PATCH] Linux-0.97 (August 1, 1992)") added
coredump handling open_namei() took the FMODE_{READ,WRITE} flags as an
argument. So the coredump handling introduced in
ddc733f452e0 ("[PATCH] Linux-0.97 (August 1, 1992)") was buggy because
O_WRONLY shouldn't have been passed. Since O_WRONLY is 1 but
open_namei() took FMODE_{READ,WRITE} it was passed FMODE_READ on
accident.
So 9cb9f18b5d26 ("[PATCH] Linux-0.99.10 (June 7, 1993)") was a bugfix
for this and the 2 didn't really mean O_RDWR, it meant FMODE_WRITE which
was correct.
The clue is that FMODE_{READ,WRITE} didn't exist yet and thus a raw "2"
value was passed.
Fast forward 5 years when around 2.2.4pre4 (February 16, 1999) this code
was changed to:
- dentry = open_namei(corefile,O_CREAT | 2 | O_TRUNC | O_NOFOLLOW, 0600);
...
+ file = filp_open(corefile,O_CREAT | 2 | O_TRUNC | O_NOFOLLOW, 0600);
At this point the raw "2" should have become O_WRONLY again as
filp_open() didn't take FMODE_{READ,WRITE} but O_{RDONLY,WRONLY,RDWR}.
Another 17 years later, the code was changed again cementing the mistake
and making it almost impossible to detect when commit
378c6520e7 ("fs/coredump: prevent fsuid=0 dumps into user-controlled directories")
replaced the raw "2" with O_RDWR.
And now, here we are with this patch that sent us on a quest to answer
the big questions in life such as "Why are coredump files opened with
O_RDWR?" and "Is it safe to just use O_WRONLY?".
So with this commit we're reintroducing O_WRONLY again and bringing this
code back to its original state when it was first introduced in commit
ddc733f452e0 ("[PATCH] Linux-0.97 (August 1, 1992)") over 30 years ago.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20230420120409.602576-1-vsementsov@yandex-team.ru>
[brauner@kernel.org: completely rewritten commit message]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Under certain circumstances we send two EFLUSH commands, resulting in two
EFLUSH ack packets, while only expecting a single EFLUSH ack.
This can cause the driver Tx flush completion to get out of sync.
To avoid this problem, don't enable the "Transmit buffer flush done" (TFD)
interrupt and remove the code handling it.
Now we only send EFLUSH command after receiving status packet with
"Init detected" (IDET) bit set.
Fixes: 26ad340e58 ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/r/20230516134318.104279-6-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Empty the "Shared receive buffer" (SRB) in probe, to assure we start in a
known state, and don't process any irrelevant packets.
Fixes: 26ad340e58 ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/r/20230516134318.104279-5-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The listen-only bit was never cleared, causing the controller to
always use listen-only mode, if previously set.
Fixes: 26ad340e58 ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/r/20230516134318.104279-3-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Set can.state to CAN_STATE_STOPPED in kvaser_pciefd_stop().
Without this fix, wrong CAN state was repported after the interface was
brought down.
Fixes: 26ad340e58 ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/r/20230516134318.104279-2-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
We get a warning when PM is not set:
../drivers/dma/ti/k3-udma.c:5552:12: warning: 'udma_pm_resume' defined but not used [-Wunused-function]
5552 | static int udma_pm_resume(struct device *dev)
| ^~~~~~~~~~~~~~
../drivers/dma/ti/k3-udma.c:5530:12: warning: 'udma_pm_suspend' defined but not used [-Wunused-function]
5530 | static int udma_pm_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~
Fix this by annotating pm function with __maybe_unused
Fixes: fbe05149e4 ("dmaengine: ti: k3-udma: Add system suspend/resume support")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20230516174311.117264-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Smatch warns:
drivers/dma/idxd/cdev.c:327:
idxd_cdev_open() warn: 'sva' was already freed.
When idxd_wq_set_pasid() fails, the current code unbinds sva and then
goes to 'failed_set_pasid' where iommu_sva_unbind_device is called
again causing the above warning.
[ device_user_pasid_enabled(idxd) is still true when calling
failed_set_pasid ]
Fix this by removing additional unbind when idxd_wq_set_pasid() fails
Fixes: b022f59725 ("dmaengine: idxd: add idxd_copy_cr() to copy user completion record during page fault handling")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230509060716.2830630-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
clang warns about an unpacked structure inside of a packed one:
drivers/net/wireless/broadcom/b43/b43.h:654:4: error: field data within 'struct b43_iv' is less aligned than 'union (unnamed union at /home/arnd/arm-soc/drivers/net/wireless/broadcom/b43/b43.h:651:2)' and is usually due to 'struct b43_iv' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access]
The problem here is that the anonymous union has the default alignment
from its members, apparently because the original author mixed up the
placement of the __packed attribute by placing it next to the struct
member rather than the union definition. As the struct itself is
also marked as __packed, there is no need to mark its members, so just
move the annotation to the inner type instead.
As Michael noted, the same problem is present in b43legacy, so
change both at the same time.
Acked-by: Michael Büsch <m@bues.ch>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/oe-kbuild-all/202305160749.ay1HAoyP-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230516183442.536589-1-arnd@kernel.org
The Allwinner sunxi-mmc controller cannot handle word (16 bit)
transfers. So and sdio_{read,write}w fails with messages like the
following example using an RTL8822BS (but the same problems were also
observed with RTL8822CS and RTL8723DS chips):
rtw_8822bs mmc1:0001:1: Firmware version 27.2.0, H2C version 13
sunxi-mmc 4021000.mmc: unaligned scatterlist: os f80 length 2
sunxi-mmc 4021000.mmc: map DMA failed
rtw_8822bs mmc1:0001:1: sdio read16 failed (0x10230): -22
Use two consecutive single byte accesses for word operations instead. It
turns out that upon closer inspection this is also what the vendor
driver does, even though it does have support for sdio_{read,write}w. So
we can conclude that the rtw88 chips do support word access but only on
SDIO controllers that also support it. Since there's no way to detect if
the controller supports word access or not the rtw88 sdio driver
switches to the easiest approach: avoiding word access.
Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Closes: https://lore.kernel.org/linux-wireless/527585e5-9cdd-66ed-c3af-6da162f4b720@lwfinger.net/
Reported-by: Rudi Heitbaum <rudi@heitbaum.com>
Link: https://github.com/LibreELEC/LibreELEC.tv/pull/7837#issue-1708469467
Fixes: 65371a3f14 ("wifi: rtw88: sdio: Add HCI implementation for SDIO based chipsets")
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230515195043.572375-1-martin.blumenstingl@googlemail.com
It's trivial for user to trigger "verifier log line truncated" warning,
as verifier has a fixed-sized buffer of 1024 bytes (as of now), and there are at
least two pieces of user-provided information that can be output through
this buffer, and both can be arbitrarily sized by user:
- BTF names;
- BTF.ext source code lines strings.
Verifier log buffer should be properly sized for typical verifier state
output. But it's sort-of expected that this buffer won't be long enough
in some circumstances. So let's drop the check. In any case code will
work correctly, at worst truncating a part of a single line output.
Reported-by: syzbot+8b2a08dfbd25fd933d75@syzkaller.appspotmail.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230516180409.3549088-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>