Currently, driver gets interrupt number directly from ice_pf::msix_entries
array. Use helper function dedicated to do just that.
While at it use a variable to store interrupt number in
ice_free_irq_msix_misc instead of calling the helper function twice.
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
As all level 2 and level 3 caches are unified, add required
cache-unified and cache-level properties to fix warnings like:
apm-mustang.dtb: l2-cache-0: 'cache-level' is a required property
apm-mustang.dtb: l2-cache-0: 'cache-unified' is a required property
Link: https://lore.kernel.org/r/20230421223139.115044-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
As all level 2 and level 3 caches are unified, add required
cache-unified and cache-level properties to fix warnings like:
en7523-evb.dtb: l2-cache0: 'cache-level' is a required property
en7523-evb.dtb: l2-cache0: 'cache-unified' is a required property
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230423150824.118430-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Keep interrupt handling code in a dedicated file. This helps keep driver
structured better and prepares for more functionality added to this file.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
There is a problem of screen shake on the old panel. So increase the
panel GOP component pull-down circuit size in hardware, and update the
initialization code at the same time. The new initialization code mainly
modifles the following.
a)adjusted for GOP timing. When Display sleep in, raise all GOP signals
to VGHO and then drop to GND.
b)Increased the Vertical back Porch and Vertical pulse width, so need to
update vsync_end and vtotal and CLK in drm_display_mode.
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
[dianders: fixed spelling mistake in subject]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230509025153.1321446-1-yangcong5@huaqin.corp-partner.google.com
clc length is now accepted to <= 8 less than length,
rather than < 8.
Solve issues on some of Axis's smb clients which send
messages where clc length is 8 bytes less than length.
The specific client was running kernel 4.19.217 with
smb dialect 3.0.2 on armv7l.
Cc: stable@vger.kernel.org
Signed-off-by: Gustav Johansson <gustajo@axis.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
ksmbd_smb2_check_message allows client to return one byte more, so we
need to allocate additional memory in ksmbd_conn_handler_loop to avoid
out-of-bound access.
Cc: stable@vger.kernel.org
Signed-off-by: Chih-Yen Chang <cc85nod@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add the Phytec STM32MP1-3 Dev board. The devboard uses a Phytec
stm32m157c-som.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The Phytec STM32MP1 based SoMs feature up to 1 GB DDR3LP RAM, up to 1 GB
eMMC, up to 16 MB QSPI and up to 128 GB NAND flash.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The Phytec STM32MP1 based SoMs feature up to 1 GB DDR3LP RAM, up to
1 GB eMMC, up to 16 MB QSPI and up to 128 GB NAND flash.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add a sleep mux option for the SPI1 pins_a mux.
This is used on the Phycore STM32MP1.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add idle and sleep mux option for the USART3 pins_a.
This is used on the Phycore STM32MP1.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add a mux option for the USART1 pins.
This is used on the Phycore STM32MP1.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add another option for the SDMMC_D47 pins.
This is used on the Phycore STM32MP1.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add another option for the SDMMC_B4 pins.
It is almost identical to sdmmc1_b4_pins_a but the SDMMC1_D2 pin.
This is used on the Phycore STM32MP1.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add another option for the SAI2B pins.
This is used on the Phycore STM32MP1.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Reviewed-by: Olivier Moysan <olivier.moysan@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add another option for the ethernet0 pins.
It is almost identical to ethernet0_rgmii_pins_c apart from TXD0/1.
This is used on the Phycore STM32MP1.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
XArray was introduced to hold large array of pointers with a simple API.
XArray API also provides array semantics which simplifies the way we store
and access the backing pages, and the code becomes significantly easier
to understand.
No performance difference was noticed between the two implementation
using fio with direct=1 [1].
[1] Performance in KIOPS:
| radix-tree | XArray | Diff
| | |
write | 315 | 313 | -0.6%
randwrite | 286 | 290 | +1.3%
read | 330 | 335 | +1.5%
randread | 309 | 312 | +0.9%
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20230511121544.111648-1-p.raghav@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This incorrect tracking caused unnecessary ring expansion in some
usecases which over days of use consume a lot of memory.
xhci driver tries to keep track of free transfer blocks (TRBs) on the
ring buffer, but failed to add back some cancelled transfers that were
turned into no-op operations instead of just moving past them.
This can happen if there are several queued pending transfers which
then are cancelled in reverse order.
Solve this by counting the numer of steps we move the dequeue pointer
once we complete a transfer, and add it to the number of free trbs
instead of just adding the trb number of the current transfer.
This way we ensure we count the no-op trbs on the way as well.
Fixes: 55f6153d8c ("xhci: remove extra loop in interrupt context")
Cc: stable@vger.kernel.org
Reported-by: Miller Hunter <MillerH@hearthnhome.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217242
Tested-by: Miller Hunter <MillerH@hearthnhome.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230515134059.161110-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Donghun reports that a notebook that has an AMD Ryzen 5700U but supports
S3 has problems with USB after resuming from suspend. The issue was
bisected down to commit d1658268e4 ("usb: pci-quirks: disable D3cold on
xhci suspend for s2idle on AMD Renoir").
As this issue only happens on S3, narrow the broken D3cold quirk to only
run in s2idle.
Fixes: d1658268e4 ("usb: pci-quirks: disable D3cold on xhci suspend for s2idle on AMD Renoir")
Reported-and-tested-by: Donghun Yoon <donghun.yoon@lge.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230515134059.161110-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For an SR-IOV device, while enabling DDW, a new table is created and
added at index 1 in the group. In the below 2 scenarios, the table is
incorrectly referenced at index 0 (which is where the table is for
default DMA window).
1. When adding DDW
This issue is exposed with "slub_debug". Error thrown out from
dma_iommu_dma_supported()
Warning: IOMMU offset too big for device mask
mask: 0xffffffff, table offset: 0x800000000000000
2. During Dynamic removal of the PCI device.
Error is from iommu_tce_table_put() since a NULL table pointer is
passed in.
Fixes: 381ceda88c ("powerpc/pseries/iommu: Make use of DDW for indirect mapping")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Gaurav Batra <gbatra@linux.vnet.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230505184701.91613-1-gbatra@linux.vnet.ibm.com
When DMA window is backed by 2MB TCEs, the DMA address for the mapped
page should be the offset of the page relative to the 2MB TCE. The code
was incorrectly setting the DMA address to the beginning of the TCE
range.
Mellanox driver is reporting timeout trying to ENABLE_HCA for an SR-IOV
ethernet port, when DMA window is backed by 2MB TCEs.
Fixes: 3872731187 ("powerps/pseries/dma: Add support for 2M IOMMU page size")
Cc: stable@vger.kernel.org # v5.16+
Signed-off-by: Gaurav Batra <gbatra@linux.vnet.ibm.com>
Reviewed-by: Greg Joyce <gjoyce@linux.vnet.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230504175913.83844-1-gbatra@linux.vnet.ibm.com
Now that power calls iommu_device_register() and populates its groups
using iommu_ops->device_group it should not be calling
iommu_group_remove_device().
The core code owns the groups and all the other related iommu data, it
will clean it up automatically.
Remove the bus notifiers and explicit calls to
iommu_group_remove_device().
Fixes: a940904443 ("powerpc/iommu: Add iommu_ops to report capabilities and allow blocking domains")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/0-v1-1421774b874b+167-ppc_device_group_jgg@nvidia.com
When using nvmem layouts it is possible devm_nvmem_register returns
-EPROBE_DEFER, resulting in an 'empty' in
/sys/kernel/debug/devices_deferred. Use dev_err_probe for providing
additional information.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
TI's J784S4 SoC supports USXGMII mode with the CPSW9G instance's MAC
ports 1 and 2. Add USXGMII mode to the extra_modes member of J784S4's
SoC data.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230331062521.529005-3-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Each of the CPSW9G ports in TI's J784S4 SoC support modes such as QSGMII.
Add a new compatible for it and allow the usage of "ti,qsgmii-main-ports"
property for J784S4.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230331062521.529005-2-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
TI's J721E SoC supports SGMII mode with the CPSW9G instance of the CPSW
Ethernet Switch. Thus, enable it by adding SGMII mode to the list of the
corresponding extra_modes member.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230309063514.398705-4-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
TI's J7200 SoC supports SGMII mode with the CPSW5G instance of the CPSW
Ethernet Switch. Thus, enable it by adding SGMII mode to the list of the
corresponding extra_modes member.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230309063514.398705-3-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support to configure the CPSW MAC's PHY in SGMII mode if the SoC
supports it. The extra_modes member of the phy_gmii_sel_soc_data struct
corresponding to the SoC is used to determine whether or not the SoC
supports SGMII mode.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230309063514.398705-2-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The patch replaces the number 12 with the appropriate numerical constant
already defined in the file stm32f7-rcc.h.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Convert platform_get_resource(),devm_ioremap_resource() to a single
call to devm_platform_ioremap_resource(), as this is exactly what this
function does.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230428052758.38636-1-yang.lee@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Update kerneldoc of struct qcom_snps_hsphy to fix:
drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c:135: warning: Function parameter or member 'update_seq_cfg' not described in 'qcom_snps_hsphy'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230507144818.193039-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
gcc on aarch64 reports
drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c: In function ‘mtk_hdmi_pll_set_rate’:
drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c:240:52: error: ‘-mgeneral-regs-only’
is incompatible with the use of floating-point types
240 | else if (tmds_clk >= 54 * MEGA && tmds_clk < 148.35 * MEGA)
Floating point should not be used, so rework the floating point comparisons
to fixed point.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20230502145005.2927101-1-trix@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Support for inno-usb2-phy on Hi3798MV100 was added into existing driver,
while Hi3798MV100 is a A9 ARM32-only SoC.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://lore.kernel.org/r/20230509060449.1151113-3-mmyangfl@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Adopt existing phy-hisi-inno-usb2 driver to Hi3798MV100, with a slightly
different TEST register convention.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://lore.kernel.org/r/20230509060449.1151113-2-mmyangfl@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Support for the Exynos4212 SoC was originally dropped as there were
no boards using it. We will be adding a device that uses it, so add
it back.
This reverts commit fee7e1d50c.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230501195525.6268-9-aweber.kernel@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
With IORING_REGISTER_USE_REGISTERED_RING, an application can register
the ring fd and use it via registered index rather than installed fd.
This allows using a registered ring for everything *except* the initial
mmap.
With IORING_SETUP_NO_MMAP, io_uring_setup uses buffers allocated by the
user, rather than requiring a subsequent mmap.
The combination of the two allows a user to operate *entirely* via a
registered ring fd, making it unnecessary to ever install the fd in the
first place. So, add a flag IORING_SETUP_REGISTERED_FD_ONLY to make
io_uring_setup register the fd and return a registered index, without
installing the fd.
This allows an application to avoid touching the fd table at all, and
allows a library to never even momentarily install a file descriptor.
This splits out an io_ring_add_registered_file helper from
io_ring_add_registered_fd, for use by io_uring_setup.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Link: https://lore.kernel.org/r/bc8f431bada371c183b95a83399628b605e978a3.1682699803.git.josh@joshtriplett.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently io_uring applications must call mmap(2) twice to map the rings
themselves, and the sqes array. This works fine, but it does not support
using huge pages to back the rings/sqes.
Provide a way for the application to pass in pre-allocated memory for
the rings/sqes, which can then suitably be allocated from shmfs or
via mmap to get huge page support.
Particularly for larger rings, this reduces the TLBs needed.
If an application wishes to take advantage of that, it must pre-allocate
the memory needed for the sq/cq ring, and the sqes. The former must
be passed in via the io_uring_params->cq_off.user_data field, while the
latter is passed in via the io_uring_params->sq_off.user_data field. Then
it must set IORING_SETUP_NO_MMAP in the io_uring_params->flags field,
and io_uring will then map the existing memory into the kernel for shared
use. The application must not call mmap(2) to map rings as it otherwise
would have, that will now fail with -EINVAL if this setup flag was used.
The pages used for the rings and sqes must be contigious. The intent here
is clearly that huge pages should be used, otherwise the normal setup
procedure works fine as-is. The application may use one huge page for
both the rings and sqes.
Outside of those initialization changes, everything works like it did
before.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We do rings and sqes separately, move them into a helper that does both
the freeing and clearing of the memory.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for having more than one time of ring allocator, make the
existing one return valid/error-pointer rather than just NULL.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We only have two reserved members we're not clearing, do so manually
instead. This is in preparation for using one of these members for
a new feature.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The mte_sync_page_tags() function sets PG_mte_tagged if it initializes
page tags. Then we return to mte_sync_tags(), which sets PG_mte_tagged
again. At best, this is redundant. However, it is possible for
mte_sync_page_tags() to return without having initialized tags for the
page, i.e. in the case where check_swap is true (non-compound page),
is_swap_pte(old_pte) is false and pte_is_tagged is false. So at worst,
we set PG_mte_tagged on a page with uninitialized tags. This can happen
if, for example, page migration causes a PTE for an untagged page to
be replaced. If the userspace program subsequently uses mprotect() to
enable PROT_MTE for that page, the uninitialized tags will be exposed
to userspace.
Fix it by removing the redundant call to set_page_mte_tagged().
Fixes: e059853d14 ("arm64: mte: Fix/clarify the PG_mte_tagged semantics")
Signed-off-by: Peter Collingbourne <pcc@google.com>
Cc: <stable@vger.kernel.org> # 6.1
Link: https://linux-review.googlesource.com/id/Ib02d004d435b2ed87603b858ef7480f7b1463052
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20230420214327.2357985-1-pcc@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Consider the following sequence of events:
1) A page in a PROT_READ|PROT_WRITE VMA is faulted.
2) Page migration allocates a page with the KASAN allocator,
causing it to receive a non-match-all tag, and uses it
to replace the page faulted in 1.
3) The program uses mprotect() to enable PROT_MTE on the page faulted in 1.
As a result of step 3, we are left with a non-match-all tag for a page
with tags accessible to userspace, which can lead to the same kind of
tag check faults that commit e74a684680 ("arm64: Reset KASAN tag in
copy_highpage with HW tags only") intended to fix.
The general invariant that we have for pages in a VMA with VM_MTE_ALLOWED
is that they cannot have a non-match-all tag. As a result of step 2, the
invariant is broken. This means that the fix in the referenced commit
was incomplete and we also need to reset the tag for pages without
PG_mte_tagged.
Fixes: e5b8d92189 ("arm64: mte: reset the page tag in page->flags")
Cc: <stable@vger.kernel.org> # 5.15
Link: https://linux-review.googlesource.com/id/I7409cdd41acbcb215c2a7417c1e50d37b875beff
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20230420210945.2313627-1-pcc@google.com
Signed-off-by: Will Deacon <will@kernel.org>
When just including <asm/arm_pmuv3.h>:
arch/arm64/include/asm/arm_pmuv3.h:31:13: error: ‘write_pmevtypern’ defined but not used [-Werror=unused-function]
31 | static void write_pmevtypern(int n, unsigned long val)
| ^~~~~~~~~~~~~~~~
arch/arm64/include/asm/arm_pmuv3.h:24:13: error: ‘write_pmevcntrn’ defined but not used [-Werror=unused-function]
24 | static void write_pmevcntrn(int n, unsigned long val)
| ^~~~~~~~~~~~~~~
arch/arm64/include/asm/arm_pmuv3.h:16:22: error: ‘read_pmevcntrn’ defined but not used [-Werror=unused-function]
16 | static unsigned long read_pmevcntrn(int n)
| ^~~~~~~~~~~~~~
Fix this by adding the missing "inline" keywords to the three accessor
functions that lack them.
Fixes: df29ddf4f0 ("arm64: perf: Abstract system register accesses away")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/d53a19043c0c3bd25f6c203e73a2fb08a9661824.1683561482.git.geert+renesas@glider.be
Signed-off-by: Will Deacon <will@kernel.org>
When just including <asm/arm_pmuv3.h>:
arch/arm/include/asm/arm_pmuv3.h:110:13: error: ‘write_pmevtypern’ defined but not used [-Werror=unused-function]
110 | static void write_pmevtypern(int n, unsigned long val)
| ^~~~~~~~~~~~~~~~
arch/arm/include/asm/arm_pmuv3.h:103:13: error: ‘write_pmevcntrn’ defined but not used [-Werror=unused-function]
103 | static void write_pmevcntrn(int n, unsigned long val)
| ^~~~~~~~~~~~~~~
arch/arm/include/asm/arm_pmuv3.h:95:22: error: ‘read_pmevcntrn’ defined but not used [-Werror=unused-function]
95 | static unsigned long read_pmevcntrn(int n)
| ^~~~~~~~~~~~~~
Fix this by adding the missing "inline" keywords to the three accessor
functions that lack them.
Fixes: 009d6dc87a ("ARM: perf: Allow the use of the PMUv3 driver on 32bit ARM")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/3a7d9bc7470aa2d85696ee9765c74f8c03fb5454.1683561482.git.geert+renesas@glider.be
Signed-off-by: Will Deacon <will@kernel.org>
If the output on a DP-alt link with its sink disconnected is kept
enabled for too long (about 20 sec), then some IOM/TCSS firmware timeout
will cause havoc on the PCI bus, at least for other GFX devices on it
which will stop powering up. Since user space is not guaranteed to do a
disabling modeset in time, switch such disconnected but active links to
TBT mode - which is without such shortcomings - with a 2 second delay.
If the above condition is detected already during the driver load/system
resume sanitization step disable the output instead, as at that point no
user space or kernel client depends on a consistent output state yet and
because subsequent atomic modeset on such connectors - without the
actual sink capabilities available - can fail.
An active/disconnected port as above will also block the HPD status of
other active/disconnected ports to get updated (stuck in the connected
state), until the former port is disabled, its PHY is disconnected and
a ~10 ms delay has elapsed. This means the link state for all TypeC
ports/CRTCs must be rechecked after a CRTC is disabled due to the above
reason. For this disconnect the PHY synchronously after the CRTC/port is
disabled and recheck all CRTCs for the above condition whenever such a
port is disabled.
To account for a race condition during driver loading where the sink is
disconnected after the above sanitization step and before the HPD
interrupts get enabled, do an explicit check/link reset if needed from
the encoder's late_register hook, which is called after the HPD
interrupts are enabled already.
v2:
- Handle an active/disconnected port blocking the HPD state update of
another active/disconnected port.
- Cancel the delayed work resetting the link also from the encoder
enable/suspend/shutdown hooks.
- Rebase on the earlier intel_modeset_lock_ctx_retry() addition,
fixing here the missed atomic state reset in case of a retry.
- Fix handling of an error return from intel_atomic_get_crtc_state().
- Recheck if the port needs to be reset after all the atomic state
is locked and async commits are waited on.
v3:
- Add intel_crtc_needs_link_reset(), instead of open-coding it,
keep intel_crtc_has_encoders(). (Ville)
- Fix state dumping and use a bitmask to track disabled CRTCs in
intel_sanitize_all_crtcs(). (Ville)
- Set internal in intel_atomic_state right after allocating it.
(Ville)
- Recheck all CRTCs (not yet force-disabled) after a CRTC is
force-disabled for any reason (not only due to a link state)
in intel_sanitize_all_crtcs().
- Reduce delay after CRTC disabling to 20ms, and use the simpler
msleep().
- Clarify code comment about HPD behaviour in
intel_sanitize_all_crtcs().
- Move all the TC link reset logic to intel_tc.c .
- Cancel the link reset work synchronously during system suspend,
driver unload and shutdown.
v4:
- Rebased on previous patch, which allows calling the TC port
suspend/cleanup handlers without modeset locks held; remove the
display driver suspended assert from the link reset work
accordingly.
v5: (Ville)
- Remove reset work canceling from intel_ddi_pre_pll_enable().
- Track a crtc vs. pipe mask in intel_sanitize_all_crtcs().
- Add reset_link_commit() to clarify the
intel_modeset_lock_ctx_retry loop.
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5860
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512195513.2699-2-imre.deak@intel.com
Call the TypeC port flush_work and cleanup handlers without the modeset
locks held. These don't require the locks, as the work takes - as it
should be able to at any point in time - any locks it needs and by the
time cleanup is called and after cleanup returns the encoder is not in
use.
This is required by the next patch canceling a TypeC port work
synchronously during encoder suspend and shutdown, where the work can
take modeset locks as well, hence the canceling must be done without
holding the locks.
I also considered moving the modeset locking down to each encoder
suspend()/shutdown() hook instead, however locking the full modeset
state for each encoder separately would be odd, and the bigger change -
affecting all encoders - is beyond the scope of this patchset.
v2:
- Add a TODO: comment to remove modeset locks if no encoder depends
on this. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512195513.2699-1-imre.deak@intel.com