Commit graph

1,215,304 commits

Author SHA1 Message Date
Douglas Anderson
44bd78dd2b irqchip/gic-v3: Disable pseudo NMIs on Mediatek devices w/ firmware issues
Some Chromebooks with Mediatek SoCs have a problem where the firmware
doesn't properly save/restore certain GICR registers. Newer
Chromebooks should fix this issue and we may be able to do firmware
updates for old Chromebooks. At the moment, the only known issue with
these Chromebooks is that we can't enable "pseudo NMIs" since the
priority register can be lost. Enabling "pseudo NMIs" on Chromebooks
with the problematic firmware causes crashes and freezes.

Let's detect devices with this problem and then disable "pseudo NMIs"
on them. We'll detect the problem by looking for the presence of the
"mediatek,broken-save-restore-fw" property in the GIC device tree
node. Any devices with fixed firmware will not have this property.

Our detection plan works because we never bake a Chromebook's device
tree into firmware. Instead, device trees are always bundled with the
kernel. We'll update the device trees of all affected Chromebooks and
then we'll never enable "pseudo NMI" on a kernel that is bundled with
old device trees. When a firmware update is shipped that fixes this
issue it will know to patch the device tree to remove the property.

In order to make this work, the quick detection mechanism of the GICv3
code is extended to be able to look for properties in addition to
looking at "compatible".

Reviewed-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230515131353.v2.2.I88dc0a0eb1d9d537de61604cd8994ecc55c0cac1@changeid
2023-05-16 10:43:24 +01:00
Douglas Anderson
43cd3ddbff dt-bindings: interrupt-controller: arm,gic-v3: Add quirk for Mediatek SoCs w/ broken FW
When trying to turn on the "pseudo NMI" kernel feature in Linux, it
was discovered that all Mediatek-based Chromebooks that ever shipped
(at least ones with GICv3) had a firmware bug where they wouldn't save
certain GIC "GICR" registers properly. If a processor ever entered a
suspend/idle mode where the GICR registers lost state then they'd be
reset to their default state.

As a result of the bug, if you try to enable "pseudo NMIs" on the
affected devices then certain interrupts will unexpectedly get
promoted to be "pseudo NMIs" and cause crashes / freezes / general
mayhem.

ChromeOS is looking to start turning on "pseudo NMIs" in production to
make crash reports more actionable. To do so, we will release firmware
updates for at least some of the affected Mediatek Chromebooks.
However, even when we update the firmware of a Chromebook it's always
possible that a user will end up booting with old firmware. We need to
be able to detect when we're running with firmware that will crash and
burn if pseudo NMIs are enabled.

The current plan is:
* Update the device trees of all affected Chromebooks to include the
  'mediatek,broken-save-restore-fw' property. The kernel can use this
  to know not to enable certain features like "pseudo NMI". NOTE:
  device trees for Chromebooks are never baked into the firmware but
  are bundled with the kernel. A kernel will never be configured to
  use "pseudo NMIs" and be bundled with an old device tree.
* When we get a fixed firmware for one of these Chromebooks, it will
  patch the device tree to remove this property.

For some details, you can also see the public bug
<https://issuetracker.google.com/281831288>

Reviewed-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230515131353.v2.1.Iabe67a827e206496efec6beb5616d5a3b99c1e65@changeid
2023-05-16 10:42:57 +01:00
Ritesh Harjani (IBM)
6e335cd789 ext2: Add direct-io trace points
This patch adds the trace point to ext2 direct-io apis
in fs/ext2/file.c

Here is how the output looks like

        a.out-467865 [006]  6758.170968: ext2_dio_write_begin: dev 7:12 ino 0xe isize 0x1000 pos 0x0 len 4096 flags DIRECT|WRITE aio 1 ret 0
        a.out-467865 [006]  6758.171061: ext2_dio_write_end:   dev 7:12 ino 0xe isize 0x1000 pos 0x0 len 0 flags DIRECT|WRITE aio 1 ret -529
kworker/3:153-444162 [003]  6758.171252: ext2_dio_write_endio: dev 7:12 ino 0xe isize 0x1000 pos 0x0 len 4096 flags DIRECT|WRITE aio 1 ret 0
        a.out-468222 [001]  6761.628924: ext2_dio_read_begin:  dev 7:12 ino 0xe isize 0x1000 pos 0x0 len 4096 flags DIRECT aio 1 ret 0
        a.out-468222 [001]  6761.629063: ext2_dio_read_end:    dev 7:12 ino 0xe isize 0x1000 pos 0x0 len 0 flags DIRECT aio 1 ret -529
        a.out-468428 [005]  6763.937454: ext2_dio_write_begin: dev 7:12 ino 0xe isize 0x1000 pos 0x0 len 4096 flags DIRECT aio 0 ret 0
        a.out-468428 [005]  6763.937829: ext2_dio_write_endio: dev 7:12 ino 0xe isize 0x1000 pos 0x0 len 4096 flags DIRECT aio 0 ret 0
        a.out-468428 [005]  6763.937847: ext2_dio_write_end:   dev 7:12 ino 0xe isize 0x1000 pos 0x1000 len 0 flags DIRECT aio 0 ret 4096
        a.out-468609 [000]  6765.702878: ext2_dio_read_begin:  dev 7:12 ino 0xe isize 0x1000 pos 0x0 len 4096 flags DIRECT aio 0 ret 0
        a.out-468609 [000]  6765.703243: ext2_dio_read_end:    dev 7:12 ino 0xe isize 0x1000 pos 0x1000 len 0 flags DIRECT aio 0 ret 4096

Reported-and-tested-by: Disha Goel <disgoel@linux.ibm.com>
[Need to add CFLAGS_trace for fixing unable to find trace file problem]
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <b8b0897fa2b273a448d7b4ba7317357ac73c08bc.1682069716.git.ritesh.list@gmail.com>
2023-05-16 11:32:42 +02:00
Ritesh Harjani (IBM)
fb5de4358e ext2: Move direct-io to use iomap
This patch converts ext2 direct-io path to iomap interface.
- This also takes care of DIO_SKIP_HOLES part in which we return -ENOTBLK
  from ext2_iomap_begin(), in case if the write is done on a hole.
- This fallbacks to buffered-io in case of DIO_SKIP_HOLES or in case of
  a partial write or if any error is detected in ext2_iomap_end().
  We try to return -ENOTBLK in such cases.
- For any unaligned or extending DIO writes, we pass
  IOMAP_DIO_FORCE_WAIT flag to ensure synchronous writes.
- For extending writes we set IOMAP_F_DIRTY in ext2_iomap_begin because
  otherwise with dsync writes on devices that support FUA, generic_write_sync
  won't be called and we might miss inode metadata updates.
- Since ext2 already now uses _nolock vartiant of sync write. Hence
  there is no inode lock problem with iomap in this patch.
- ext2_iomap_ops are now being shared by DIO, DAX & fiemap path

Tested-by: Disha Goel <disgoel@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <610b672a52f2a7ff6dc550fd14d0f995806232a5.1682069716.git.ritesh.list@gmail.com>
2023-05-16 11:32:42 +02:00
Ritesh Harjani (IBM)
d053070425 ext2: Use generic_buffers_fsync() implementation
Next patch converts ext2 to use iomap interface for DIO.
iomap layer can call generic_write_sync() -> ext2_fsync() from
iomap_dio_complete while still holding the inode_lock().

Now writeback from other paths doesn't need inode_lock().
It seems there is also no need of an inode_lock() for
sync_mapping_buffers(). It uses it's own mapping->private_lock
for it's buffer list handling.
Hence this patch is in preparation to move ext2 to iomap.
This uses generic_buffers_fsync() which does not take any inode_lock()
in ext2_fsync().

Tested-by: Disha Goel <disgoel@linux.ibm.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <76d206a464574ff91db25bc9e43479b51ca7e307.1682069716.git.ritesh.list@gmail.com>
2023-05-16 11:32:42 +02:00
Ritesh Harjani (IBM)
5b5b4ff8f9 ext4: Use generic_buffers_fsync_noflush() implementation
ext4 when got converted to iomap for dio, it copied __generic_file_fsync
implementation to avoid taking inode_lock in order to avoid any deadlock
(since iomap takes an inode_lock while calling generic_write_sync()).

The previous patch already added generic_buffers_fsync*() which does not
take any inode_lock(). Hence kill the redundant code and use
generic_buffers_fsync_noflush() function instead.

Tested-by: Disha Goel <disgoel@linux.ibm.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <b43d4bb4403061ed86510c9587673e30a461ba14.1682069716.git.ritesh.list@gmail.com>
2023-05-16 11:32:42 +02:00
Ritesh Harjani (IBM)
31b2ebc092 fs/buffer.c: Add generic_buffers_fsync*() implementation
Some of the higher layers like iomap takes inode_lock() when calling
generic_write_sync().
Also writeback already happens from other paths without inode lock,
so it's difficult to say that we really need sync_mapping_buffers() to
take any inode locking here. Having said that, let's add
generic_buffers_fsync/_noflush() implementation in buffer.c with no
inode_lock/unlock() for now so that filesystems like ext2 and
ext4's nojournal mode can use it.

Ext4 when got converted to iomap for direct-io already copied it's own
variant of __generic_file_fsync() without lock.

This patch adds generic_buffers_fsync()
& generic_buffers_fsync_noflush() implementations for use in filesystems
like ext2 & ext4 respectively.

Later we can review other filesystems as well to see if we can make
generic_buffers_fsync/_noflush() which does not take any inode_lock() as
the default path.

Tested-by: Disha Goel <disgoel@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <d573408ac8408627d23a3d2d166e748c172c4c9e.1682069716.git.ritesh.list@gmail.com>
2023-05-16 11:32:42 +02:00
Ritesh Harjani (IBM)
fcced95b6b ext2/dax: Fix ext2_setsize when len is page aligned
PAGE_ALIGN(x) macro gives the next highest value which is multiple of
pagesize. But if x is already page aligned then it simply returns x.
So, if x passed is 0 in dax_zero_range() function, that means the
length gets passed as 0 to ->iomap_begin().

In ext2 it then calls ext2_get_blocks -> max_blocks as 0 and hits bug_on
here in ext2_get_blocks().
	BUG_ON(maxblocks == 0);

Instead we should be calling dax_truncate_page() here which takes
care of it. i.e. it only calls dax_zero_range if the offset is not
page/block aligned.

This can be easily triggered with following on fsdax mounted pmem
device.

dd if=/dev/zero of=file count=1 bs=512
truncate -s 0 file

[79.525838] EXT2-fs (pmem0): DAX enabled. Warning: EXPERIMENTAL, use at your own risk
[79.529376] ext2 filesystem being mounted at /mnt1/test supports timestamps until 2038 (0x7fffffff)
[93.793207] ------------[ cut here ]------------
[93.795102] kernel BUG at fs/ext2/inode.c:637!
[93.796904] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[93.798659] CPU: 0 PID: 1192 Comm: truncate Not tainted 6.3.0-rc2-xfstests-00056-g131086faa369 #139
[93.806459] RIP: 0010:ext2_get_blocks.constprop.0+0x524/0x610
<...>
[93.835298] Call Trace:
[93.836253]  <TASK>
[93.837103]  ? lock_acquire+0xf8/0x110
[93.838479]  ? d_lookup+0x69/0xd0
[93.839779]  ext2_iomap_begin+0xa7/0x1c0
[93.841154]  iomap_iter+0xc7/0x150
[93.842425]  dax_zero_range+0x6e/0xa0
[93.843813]  ext2_setsize+0x176/0x1b0
[93.845164]  ext2_setattr+0x151/0x200
[93.846467]  notify_change+0x341/0x4e0
[93.847805]  ? lock_acquire+0xf8/0x110
[93.849143]  ? do_truncate+0x74/0xe0
[93.850452]  ? do_truncate+0x84/0xe0
[93.851739]  do_truncate+0x84/0xe0
[93.852974]  do_sys_ftruncate+0x2b4/0x2f0
[93.854404]  do_syscall_64+0x3f/0x90
[93.855789]  entry_SYSCALL_64_after_hwframe+0x72/0xdc

CC: stable@vger.kernel.org
Fixes: 2aa3048e03 ("iomap: switch iomap_zero_range to use iomap_iter")
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <046a58317f29d9603d1068b2bbae47c2332c17ae.1682069716.git.ritesh.list@gmail.com>
2023-05-16 11:32:42 +02:00
Oswald Buddenhagen
bcdbd3b788 ALSA: emu10k1: enable bit-exact playback, part 2: voice attenuation
The voice volume is a raw fractional multiplier that can't actually
represent 1.0. To still enable real pass-through, we now set the volume
to 0.5 (which results in no loss of precision, as the FX bus provides
fractional values) and scale up the samples in DSP code.

To maintain backwards compatibility with existing configuration files,
we rescale the values in the mixer controls. The range is extended
upwards from 0xffff to 0x1fffd, which actually introduces the
possibility of specifying an amplification.

There is still a minor incompatibility with user space, namely if
someone loaded custom DSP code. They'll just get half the volume, so
this doesn't seem like a big deal.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230514170323.3408834-8-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-05-16 11:11:04 +02:00
Stefan Kristiansson
d944364651 soc/tegra: fuse: Add support for Tegra264
Add support for Tegra264 to the fuse handling code.

Signed-off-by: Stefan Kristiansson <stefank@nvidia.com>
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-05-16 10:58:50 +02:00
Krzysztof Kozlowski
f5a08ed51e platform/x86: toshiba: constify pointers to hwmon_channel_info
Statically allocated array of pointers to hwmon_channel_info can be made
const for safety.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230511175627.282246-4-krzysztof.kozlowski@linaro.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-05-16 10:36:56 +02:00
Krzysztof Kozlowski
ddd4e9d780 platform/x86: system76: constify pointers to hwmon_channel_info
Statically allocated array of pointers to hwmon_channel_info can be made
const for safety.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230511175627.282246-3-krzysztof.kozlowski@linaro.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-05-16 10:36:56 +02:00
Krzysztof Kozlowski
1180bdfdec platform/x86: hp: constify pointers to hwmon_channel_info
Statically allocated array of pointers to hwmon_channel_info can be made
const for safety.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230511175627.282246-2-krzysztof.kozlowski@linaro.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-05-16 10:36:56 +02:00
Krzysztof Kozlowski
a1c3f6976b platform/x86: gigabyte: constify pointers to hwmon_channel_info
Statically allocated array of pointers to hwmon_channel_info can be made
const for safety.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230511175627.282246-1-krzysztof.kozlowski@linaro.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-05-16 10:36:56 +02:00
Liming Sun
e9d1b2d0f7 mlxbf-bootctl: Add sysfs file for BlueField boot log
This commit adds sysfs interface to be used to write into the
boot log which is 1KB HW buffer on BlueField SoC. The same log
buffer is also used by firmware code like ATF/UEFI, and can be
displayed by userspace tools or from external host via USB/PCIe.

Signed-off-by: Liming Sun <limings@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20230511144924.171585-1-limings@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-05-16 10:36:55 +02:00
Shyam Sundar S K
506ed33d07 platform/x86/amd/pmf: Fix compiler warnings in static slider
This patch fixes warnings with -Wmissing-prototypes:

warning: no previous prototype for 'source_as_str' [-Wmissing-prototypes]
warning: no previous prototype for 'slider_as_str' [-Wmissing-prototypes]

Fixes: a82ebb3d80 ("platform/x86/amd/pmf: Add PMF acpi debug support")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202305160220.REQc5T2y-lkp@intel.com/
Suggested-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230516074531.2885235-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-05-16 10:36:55 +02:00
Francesco Dolcini
81d6b37b69 drm/bridge: tc358768: remove unneeded semicolon
Remove unneeded stray semicolon.

Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202305152341.oiSjRpv6-lkp@intel.com/
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230515184408.9421-1-francesco@dolcini.it
2023-05-16 10:19:15 +02:00
Anup Sharma
728cb3f061 gpu: drm: bridge: No need to set device_driver owner
There is no need to exclusively set the .owner member of the struct
device_driver when defining the platform_driver struct. The Linux core
takes care of setting the .owner member as part of the call to
module_platform_driver() helper function.

Issue identified using the platform_no_drv_owner.cocci Coccinelle
semantic patch as:
drivers/gpu/drm/bridge/samsung-dsim.c:1957:6-11: No need to set .owner here.
The core will do it.

No functional changes are intended.

Signed-off-by: Anup Sharma <anupnewsmail@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/ZF9igb/nvL6GRBsq@yoga
2023-05-16 10:18:59 +02:00
Marek Vasut
adbcfcc92b dt-bindings: display: bridge: tc358867: Document TC358867/TC9595 compatible
The TC358867/TC9595 devices are compatible with the predecessor TC358767.
Document compatible strings for the new devices, so they can be discerned
in board DTs. Update the title to match description in the process.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230515162033.66986-1-marex@denx.de
2023-05-16 10:18:23 +02:00
Suraj Kandpal
e45c5f1ad7 drm/i915/hdcp: Fill hdcp2_streamid_type and k in appropriate places
stream_id and k(no of streams) should be set in
intel_hdcp_set_content_streams. stream_type should be set in
intel_hdcp_required_content_stream.

--v5
-add missing stream_id assignment [Ankit]

Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230515112726.689116-1-suraj.kandpal@intel.com
2023-05-16 13:46:19 +05:30
Suraj Kandpal
a6d82f1b7a drm/i915/hdcp: Fix modeset locking issue in hdcp mst
Since topology state is being added to drm_atomic_state now all
drm_modeset_lock required are being taken from core. This raises
an issue when we try to loop over connector and assign vcpi id to
our streams as we did not have atomic state to derive acquire_ctx
from. We fill in stream info if dpmst encoder is found before
enabling hdcp. intel_hdcp_required_stream will be broken which
will only set the content type.

--v2
-move prepare streams to beginning of intel_hdcp_enable to avoid
checking of mst encoder twice [Ankit]

--v3
-break intel_required_content_stream to two part and set the stream_id
at the beginning [Ankit]

--v4
-change return types for intel_hdcp_prepare_stream and
intel_hdcp_required content_stream [Ankit]
-rename intel_hdcp_set_content_stream to
intel_hdcp_set_stream [Ankit]
-place intel_hdcp_set_streams above caller [Ankit]

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230515103225.688830-4-suraj.kandpal@intel.com
2023-05-16 13:42:10 +05:30
Suraj Kandpal
415beb1fa6 drm/i915/hdcp: Remove enforce_type0 check outside loop
Remove enforce_type0 check outside the loop since it
does not make sense to keep it there as we use the same
digport and continue checking it again and again

Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230515103225.688830-3-suraj.kandpal@intel.com
2023-05-16 13:39:56 +05:30
Suraj Kandpal
4c4279a8d5 drm/i915/hdcp: add intel_atomic_state argument to hdcp_enable function
Pass all the parameter in intel_encoder->enable()
to intel_hdcp_enable as we need intel_atomic_state
later down to get acquire_ctx.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230515103225.688830-2-suraj.kandpal@intel.com
2023-05-16 13:38:57 +05:30
Yunsheng Lin
8b33485128 net: skbuff: update comment about pfmemalloc propagating
__skb_fill_page_desc_noacc() is not doing any pfmemalloc
propagating, and yet it has a comment about that, commit
84ce071e38 ("net: introduce __skb_fill_page_desc_noacc")
may have accidentally moved it to __skb_fill_page_desc_noacc(),
so move it back to __skb_fill_page_desc() which is supposed
to be doing pfmemalloc propagating.

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
CC: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20230515050107.46397-1-linyunsheng@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-05-16 09:47:07 +02:00
Linus Walleij
140809738d drm/pl111: Fix FB depth on IMPD-1 framebuffer
The last argument to the function drm_fbdev_dma_setup() was
changed from desired BPP to desired depth.

In our case the desired depth was 15 but BPP was 16, so we
specified 16 as BPP and we relied on the FB emulation core to
select a format with a suitable depth for the limited bandwidth
and end up with e.g. XRGB1555 like in the past:

[drm] Initialized pl111 1.0.0 20170317 for c1000000.display on minor 0
drm-clcd-pl111 c1000000.display: [drm] requested bpp 16, scaled depth down to 15
drm-clcd-pl111 c1000000.display: enable IM-PD1 CLCD connectors
Console: switching to colour frame buffer device 80x30
drm-clcd-pl111 c1000000.display: [drm] fb0: pl111drmfb frame buffer device

However the current code will fail at that:

[drm] Initialized pl111 1.0.0 20170317 for c1000000.display on minor 0
drm-clcd-pl111 c1000000.display: [drm] bpp/depth value of 16/16 not supported
drm-clcd-pl111 c1000000.display: [drm] No compatible format found
drm-clcd-pl111 c1000000.display: [drm] *ERROR* fbdev: Failed to setup generic emulation (ret=-12)

Fix this by passing the desired depth of 15 for the IM/PD-1 display
instead of 16 to drm_fbdev_dma_setup().

The desired depth is however in turn used for bandwidth limiting
calculations and that was done with a simple / integer division,
whereas we now have to modify that to use DIV_ROUND_UP() so that
we get DIV_ROUND_UP(15, 2) = 2 not 15/2 = 1.

After this the display works again on the Integrator/AP IM/PD-1.

Cc: Emma Anholt <emma@anholt.net>
Cc: stable@vger.kernel.org
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 37c90d589d ("drm/fb-helper: Fix single-probe color-format selection")
Link: https://lore.kernel.org/dri-devel/20230102112927.26565-1-tzimmermann@suse.de/
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230515092943.1401558-1-linus.walleij@linaro.org
2023-05-16 09:46:21 +02:00
Florian Fainelli
225c657945 net: bcmgenet: Restore phy_stop() depending upon suspend/close
Removing the phy_stop() from bcmgenet_netif_stop() ended up causing
warnings from the PHY library that phy_start() is called from the
RUNNING state since we are no longer stopping the PHY state machine
during bcmgenet_suspend().

Restore the call to phy_stop() but make it conditional on being called
from the close or suspend path.

Fixes: c96e731c93 ("net: bcmgenet: connect and disconnect from the PHY state machine")
Fixes: 93e0401e0f ("net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop()")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20230515025608.2587012-1-f.fainelli@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-05-16 09:34:38 +02:00
Jani Nikula
2b874a0278 drm/i915/irq: split out display irq handling
Split (non-hotplug) display irq handling out of i915_irq.[ch] into
display/intel_display_irq.[ch].

v3:
- Preserve [I915_MAX_PIPES] harder (kernel test robot)

v2:
- Rebase
- Preserve [I915_MAX_PIPES] in functions (kernel test robot)

Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230515101738.2399816-3-jani.nikula@intel.com
2023-05-16 10:31:27 +03:00
Jani Nikula
da38ba9864 drm/i915/irq: split out hotplug irq handling
Split hotplug irq handling out of i915_irq.[ch] into
display/intel_hotplug_irq.[ch].

The line between the new intel_hotplug_irq.[ch] and the existing
intel_hotplug.[ch] needs further clarification, but the first step is to
move the stuff out of i915_irq.[ch].

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230515101738.2399816-2-jani.nikula@intel.com
2023-05-16 10:31:22 +03:00
Jani Nikula
08d8f43045 drm/i915/irq: convert gen8_de_irq_handler() to void
The return value is not used for anything.

Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230515101738.2399816-1-jani.nikula@intel.com
2023-05-16 10:31:20 +03:00
David Lin
518a1742f4
ASoC: dt-bindings: nau8824: Convert to dtschema
Convert the NAU8824 audio CODEC bindings to DT schema.

Signed-off-by: David Lin <CTLIN0@nuvoton.com
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Link: https://lore.kernel.org/r/20230515065557.614125-1-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org
2023-05-16 10:15:13 +09:00
Marek Vasut
20ef7f2139
ASoC: dt-bindings: ssm2518: Convert to dtschema
Convert the ADI SSM2518 audio CODEC bindings to DT schema.

Signed-off-by: Marek Vasut <marex@denx.de
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Link: https://lore.kernel.org/r/20230514225243.777504-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org
2023-05-16 10:15:12 +09:00
Amit Kumar Mahapatra
445164e8c1
spi: dw: Replace spi->chip_select references with function calls
New set/get APIs for accessing spi->chip_select were introduced by
'commit 9e264f3f85 ("spi: Replace all spi->chip_select and spi->cs_gpiod
references with function call")', but the 'commit 2c8606040a ("spi: dw:
Add support for AMD Pensando Elba SoC")' uses the old interface by directly
accessing spi->chip_select. So, replace all spi->chip_select references
in the driver with new get/set APIs.

Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com
Acked-by: Serge Semin <fancer.lancer@gmail.com
Link: https://lore.kernel.org/r/20230515130343.63770-1-amit.kumar-mahapatra@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org
2023-05-16 10:15:06 +09:00
Osama Muhammad
2bf1c45be3
regulator: Fix error checking for debugfs_create_dir
This patch fixes the error checking in core.c in debugfs_create_dir.
The correct way to check if an error occurred is 'IS_ERR' inline function.

Signed-off-by: Osama Muhammad <osmtendev@gmail.com
Suggested-by: Ivan Orlov <ivan.orlov0322@gmail.com
Link: https://lore.kernel.org/r/20230515172938.13338-1-osmtendev@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org
2023-05-16 10:15:00 +09:00
Jerry Snitselaar
e7d3e5c4b1 tpm/tpm_tis: Disable interrupts for more Lenovo devices
The P360 Tiny suffers from an irq storm issue like the T490s, so add
an entry for it to tpm_tis_dmi_table, and force polling. There also
previously was a report from the previous attempt to enable interrupts
that involved a ThinkPad L490. So an entry is added for it as well.

Cc: stable@vger.kernel.org
Reported-by: Peter Zijlstra <peterz@infradead.org> # P360 Tiny
Closes: https://lore.kernel.org/linux-integrity/20230505130731.GO83892@hirez.programming.kicks-ass.net/
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-05-16 02:48:23 +03:00
Jarkko Sakkinen
99d4645062 tpm: Prevent hwrng from activating during resume
Set TPM_CHIP_FLAG_SUSPENDED in tpm_pm_suspend() and reset in
tpm_pm_resume(). While the flag is set, tpm_hwrng() gives back zero
bytes. This prevents hwrng from racing during resume.

Cc: stable@vger.kernel.org
Fixes: 6e592a065d ("tpm: Move Linux RNG connection to hwrng")
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-05-16 02:43:12 +03:00
Jarkko Sakkinen
1398aa803f tpm_tis: Use tpm_chip_{start,stop} decoration inside tpm_tis_resume
Before sending a TPM command, CLKRUN protocol must be disabled. This is not
done in the case of tpm1_do_selftest() call site inside tpm_tis_resume().

Address this by decorating the calls with tpm_chip_{start,stop}, which
should be always used to arm and disarm the TPM chip for transmission.

Finally, move the call to the main TPM driver callback as the last step
because it should arm the chip by itself, if it needs that type of
functionality.

Cc: stable@vger.kernel.org
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Closes: https://lore.kernel.org/linux-integrity/CS68AWILHXS4.3M36M1EKZLUMS@suppilovahvero/
Fixes: a3fbfae82b ("tpm: take TPM chip power gating out of tpm_transmit()")
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-05-16 02:43:12 +03:00
Kang Chen
4cbb0d3588 power: supply: mt6360: add a check of devm_work_autocancel in mt6360_charger_probe
devm_work_autocancel may fail, add a check and return early.

Fixes: 0402e8ebb8 ("power: supply: mt6360_charger: add MT6360 charger support")
Signed-off-by: Kang Chen <void0red@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-05-16 00:46:53 +02:00
Daisuke Nojiri
b2f2a3c980 power: supply: sbs-charger: Fix INHIBITED bit for Status reg
CHARGE_INHIBITED bit position of the ChargerStatus register is actually
0 not 1. This patch corrects it.

Fixes: feb583e37f ("power: supply: add sbs-charger driver")
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-05-16 00:06:10 +02:00
Yafang Shao
108598c39e bpf: Fix memleak due to fentry attach failure
If it fails to attach fentry, the allocated bpf trampoline image will be
left in the system. That can be verified by checking /proc/kallsyms.

This meamleak can be verified by a simple bpf program as follows:

  SEC("fentry/trap_init")
  int fentry_run()
  {
      return 0;
  }

It will fail to attach trap_init because this function is freed after
kernel init, and then we can find the trampoline image is left in the
system by checking /proc/kallsyms.

  $ tail /proc/kallsyms
  ffffffffc0613000 t bpf_trampoline_6442453466_1  [bpf]
  ffffffffc06c3000 t bpf_trampoline_6442453466_1  [bpf]

  $ bpftool btf dump file /sys/kernel/btf/vmlinux | grep "FUNC 'trap_init'"
  [2522] FUNC 'trap_init' type_id=119 linkage=static

  $ echo $((6442453466 & 0x7fffffff))
  2522

Note that there are two left bpf trampoline images, that is because the
libbpf will fallback to raw tracepoint if -EINVAL is returned.

Fixes: e21aa34178 ("bpf: Fix fexit trampoline.")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <song@kernel.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Link: https://lore.kernel.org/bpf/20230515130849.57502-2-laoar.shao@gmail.com
2023-05-15 23:41:59 +02:00
Ilkka Koskinen
a9650b7f6f perf vendor events arm64: Add AmpereOne core PMU events
Add JSON files for AmpereOne core PMU events.

Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Doug Rady <dcrady@os.amperecomputing.com>
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230427223220.1068356-1-ilkka@os.amperecomputing.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-05-15 18:35:36 -03:00
Changbin Du
40bf1cb07e perf ftrace: Flush output after each writing
The pager will result stdout in full buffering mode instead of line
buffering. We need to make the trace visible timely.

Signed-off-by: Changbin Du <changbin.du@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230513074000.733550-1-changbin.du@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-05-15 18:27:33 -03:00
Aidan MacDonald
18618dd0de dt-bindings: power: supply: axp20x: Add AXP192 compatible
The AXP192 is most similar to the AXP202, but the current
limits are different and the USB OTG status register has
a different address (0x04 instead of 0x02).

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-05-15 23:19:52 +02:00
Aidan MacDonald
af1dcd3d2d power: supply: axp20x_usb_power: Add support for AXP192
Add support for the AXP192. It is most similar to the AXP202 but
the current limits are different and the USB OTG status register
has a different address (0x04 instead of 0x02).

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-05-15 23:19:52 +02:00
Aidan MacDonald
830087b11e power: supply: axp20x_usb_power: Remove variant IDs from VBUS polling check
Use an explicit boolean flag instead of a check based on the
variant ID. Since this is the last use of variant IDs in the
driver, also remove the IDs.

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-05-15 23:19:52 +02:00
Aidan MacDonald
305398bfce power: supply: axp20x_usb_power: Use regmap field for VBUS disabling
The POWER_SUPPLY_PROP_ONLINE property allows controlling the VBUS
enable state on supported PMICs. Switch to regmap fields to reduce
dependence on variant IDs.

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-05-15 23:19:52 +02:00
Aidan MacDonald
70b3b6d9a8 power: supply: axp20x_usb_power: Use regmap fields for USB BC feature
Replace the use of variant IDs with a regmap field, to reduce
dependence on variant IDs.

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-05-15 23:19:52 +02:00
Aidan MacDonald
05c14ac245 power: supply: axp20x_usb_power: Use regmap fields for VBUS monitor feature
Use regmap fields to describe the VBUS valid bit and VBUS monitor
enable bit. This allows the driver to easily support other chips,
eg. the AXP192, that have the VBUS valid bit in a different register.

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-05-15 23:19:52 +02:00
Aidan MacDonald
28ca77c9bb power: supply: axp20x_usb_power: Simplify USB current limit handling
Handle the USB current limit with a lookup table and regmap field,
which minimizes code duplication. Invalid or unlimited values are
denoted by -1 entries, and can't be selected from userspace.

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-05-15 23:19:52 +02:00
Marc Kleine-Budde
2a3e163602 Merge patch series "can: Convert to platform remove callback returning void"
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> says:

this series converts the drivers below drivers/net/can to the
.remove_new() callback of struct platform_driver(). The motivation is to
make the remove callback less prone for errors and wrong assumptions.
See commit 5c5a7680e6 ("platform: Provide a remove callback that
returns no value") for a more detailed rationale.

All drivers already returned zero unconditionally in their
.remove() callback, so converting them to .remove_new() is trivial.

Link: https://lore.kernel.org/r/20230512212725.143824-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-05-15 22:54:22 +02:00
Uwe Kleine-König
0816e1dd5e can: xilinx: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart from
emitting a warning) and this typically results in resource leaks. To improve
here there is a quest to make the remove callback return void. In the first
step of this quest all drivers are converted to .remove_new() which already
returns void. Eventually after all drivers are converted, .remove_new() is
renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230512212725.143824-20-u.kleine-koenig@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-05-15 22:53:51 +02:00