Commit graph

1,215,304 commits

Author SHA1 Message Date
Mårten Lindahl
7b0518fbf2
regulator: Add support for TI TPS6287x regulators
Add support for Texas Instruments TPS6287x, single-channel
synchronous step-down converters with four output voltage ranges.

Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com
Link: https://lore.kernel.org/r/20230502-tps6287x-driver-v3-2-e25140a023f5@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org
2023-05-09 13:26:49 +09:00
Mårten Lindahl
034008dd22
regulator: dt-bindings: Add bindings for TPS6287x
Add bindings for the TPS62870/TPS62871/TPS62872/TPS62873 voltage
regulators.

Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Link: https://lore.kernel.org/r/20230502-tps6287x-driver-v3-1-e25140a023f5@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org
2023-05-09 13:26:48 +09:00
Tejun Heo
4c1b3f26a9 wifi: iwlwifi: Use default @max_active for trans_pcie->rba.alloc_wq
trans_pcie->rba.alloc_wq only hosts a single work item and thus doesn't need
explicit concurrency limit. Let's use the default @max_active. This doesn't
cost anything and clearly expresses that @max_active doesn't matter.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Johannes Berg <johannes.berg@intel.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Gregory Greenman <gregory.greenman@intel.com>
Cc: Avraham Stern <avraham.stern@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mordechay Goodstein <mordechay.goodstein@intel.com>
Cc: "Haim, Dreyfuss" <haim.dreyfuss@intel.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
2023-05-08 15:33:17 -10:00
Tejun Heo
715557b02c xen/pvcalls: Use alloc_ordered_workqueue() to create ordered workqueues
BACKGROUND
==========

When multiple work items are queued to a workqueue, their execution order
doesn't match the queueing order. They may get executed in any order and
simultaneously. When fully serialized execution - one by one in the queueing
order - is needed, an ordered workqueue should be used which can be created
with alloc_ordered_workqueue().

However, alloc_ordered_workqueue() was a later addition. Before it, an
ordered workqueue could be obtained by creating an UNBOUND workqueue with
@max_active==1. This originally was an implementation side-effect which was
broken by 4c16bd327c ("workqueue: restore WQ_UNBOUND/max_active==1 to be
ordered"). Because there were users that depended on the ordered execution,
5c0338c687 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
made workqueue allocation path to implicitly promote UNBOUND workqueues w/
@max_active==1 to ordered workqueues.

While this has worked okay, overloading the UNBOUND allocation interface
this way creates other issues. It's difficult to tell whether a given
workqueue actually needs to be ordered and users that legitimately want a
min concurrency level wq unexpectedly gets an ordered one instead. With
planned UNBOUND workqueue updates to improve execution locality and more
prevalence of chiplet designs which can benefit from such improvements, this
isn't a state we wanna be in forever.

This patch series audits all callsites that create an UNBOUND workqueue w/
@max_active==1 and converts them to alloc_ordered_workqueue() as necessary.

WHAT TO LOOK FOR
================

The conversions are from

  alloc_workqueue(WQ_UNBOUND | flags, 1, args..)

to 

  alloc_ordered_workqueue(flags, args...)

which don't cause any functional changes. If you know that fully ordered
execution is not ncessary, please let me know. I'll drop the conversion and
instead add a comment noting the fact to reduce confusion while conversion
is in progress.

If you aren't fully sure, it's completely fine to let the conversion
through. The behavior will stay exactly the same and we can always
reconsider later.

As there are follow-up workqueue core changes, I'd really appreciate if the
patch can be routed through the workqueue tree w/ your acks. Thanks.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: xen-devel@lists.xenproject.org
2023-05-08 15:33:12 -10:00
Tejun Heo
255c1273c2 virt: acrn: Use alloc_ordered_workqueue() to create ordered workqueues
BACKGROUND
==========

When multiple work items are queued to a workqueue, their execution order
doesn't match the queueing order. They may get executed in any order and
simultaneously. When fully serialized execution - one by one in the queueing
order - is needed, an ordered workqueue should be used which can be created
with alloc_ordered_workqueue().

However, alloc_ordered_workqueue() was a later addition. Before it, an
ordered workqueue could be obtained by creating an UNBOUND workqueue with
@max_active==1. This originally was an implementation side-effect which was
broken by 4c16bd327c ("workqueue: restore WQ_UNBOUND/max_active==1 to be
ordered"). Because there were users that depended on the ordered execution,
5c0338c687 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
made workqueue allocation path to implicitly promote UNBOUND workqueues w/
@max_active==1 to ordered workqueues.

While this has worked okay, overloading the UNBOUND allocation interface
this way creates other issues. It's difficult to tell whether a given
workqueue actually needs to be ordered and users that legitimately want a
min concurrency level wq unexpectedly gets an ordered one instead. With
planned UNBOUND workqueue updates to improve execution locality and more
prevalence of chiplet designs which can benefit from such improvements, this
isn't a state we wanna be in forever.

This patch series audits all callsites that create an UNBOUND workqueue w/
@max_active==1 and converts them to alloc_ordered_workqueue() as necessary.

WHAT TO LOOK FOR
================

The conversions are from

  alloc_workqueue(WQ_UNBOUND | flags, 1, args..)

to 

  alloc_ordered_workqueue(flags, args...)

which don't cause any functional changes. If you know that fully ordered
execution is not ncessary, please let me know. I'll drop the conversion and
instead add a comment noting the fact to reduce confusion while conversion
is in progress.

If you aren't fully sure, it's completely fine to let the conversion
through. The behavior will stay exactly the same and we can always
reconsider later.

As there are follow-up workqueue core changes, I'd really appreciate if the
patch can be routed through the workqueue tree w/ your acks. Thanks.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Fei Li <fei1.li@intel.com>
2023-05-08 15:33:06 -10:00
Tejun Heo
289f974674 net: octeontx2: Use alloc_ordered_workqueue() to create ordered workqueues
BACKGROUND
==========

When multiple work items are queued to a workqueue, their execution order
doesn't match the queueing order. They may get executed in any order and
simultaneously. When fully serialized execution - one by one in the queueing
order - is needed, an ordered workqueue should be used which can be created
with alloc_ordered_workqueue().

However, alloc_ordered_workqueue() was a later addition. Before it, an
ordered workqueue could be obtained by creating an UNBOUND workqueue with
@max_active==1. This originally was an implementation side-effect which was
broken by 4c16bd327c ("workqueue: restore WQ_UNBOUND/max_active==1 to be
ordered"). Because there were users that depended on the ordered execution,
5c0338c687 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
made workqueue allocation path to implicitly promote UNBOUND workqueues w/
@max_active==1 to ordered workqueues.

While this has worked okay, overloading the UNBOUND allocation interface
this way creates other issues. It's difficult to tell whether a given
workqueue actually needs to be ordered and users that legitimately want a
min concurrency level wq unexpectedly gets an ordered one instead. With
planned UNBOUND workqueue updates to improve execution locality and more
prevalence of chiplet designs which can benefit from such improvements, this
isn't a state we wanna be in forever.

This patch series audits all callsites that create an UNBOUND workqueue w/
@max_active==1 and converts them to alloc_ordered_workqueue() as necessary.

WHAT TO LOOK FOR
================

The conversions are from

  alloc_workqueue(WQ_UNBOUND | flags, 1, args..)

to 

  alloc_ordered_workqueue(flags, args...)

which don't cause any functional changes. If you know that fully ordered
execution is not ncessary, please let me know. I'll drop the conversion and
instead add a comment noting the fact to reduce confusion while conversion
is in progress.

If you aren't fully sure, it's completely fine to let the conversion
through. The behavior will stay exactly the same and we can always
reconsider later.

As there are follow-up workqueue core changes, I'd really appreciate if the
patch can be routed through the workqueue tree w/ your acks. Thanks.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Sunil Goutham <sgoutham@marvell.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Ratheesh Kannoth <rkannoth@marvell.com>
Cc: Srujana Challa <schalla@marvell.com>
Cc: Geetha sowjanya <gakula@marvell.com>
Cc: netdev@vger.kernel.org
2023-05-08 15:33:00 -10:00
Tejun Heo
25c8c0d91d net: thunderx: Use alloc_ordered_workqueue() to create ordered workqueues
BACKGROUND
==========

When multiple work items are queued to a workqueue, their execution order
doesn't match the queueing order. They may get executed in any order and
simultaneously. When fully serialized execution - one by one in the queueing
order - is needed, an ordered workqueue should be used which can be created
with alloc_ordered_workqueue().

However, alloc_ordered_workqueue() was a later addition. Before it, an
ordered workqueue could be obtained by creating an UNBOUND workqueue with
@max_active==1. This originally was an implementation side-effect which was
broken by 4c16bd327c ("workqueue: restore WQ_UNBOUND/max_active==1 to be
ordered"). Because there were users that depended on the ordered execution,
5c0338c687 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
made workqueue allocation path to implicitly promote UNBOUND workqueues w/
@max_active==1 to ordered workqueues.

While this has worked okay, overloading the UNBOUND allocation interface
this way creates other issues. It's difficult to tell whether a given
workqueue actually needs to be ordered and users that legitimately want a
min concurrency level wq unexpectedly gets an ordered one instead. With
planned UNBOUND workqueue updates to improve execution locality and more
prevalence of chiplet designs which can benefit from such improvements, this
isn't a state we wanna be in forever.

This patch series audits all callsites that create an UNBOUND workqueue w/
@max_active==1 and converts them to alloc_ordered_workqueue() as necessary.

WHAT TO LOOK FOR
================

The conversions are from

  alloc_workqueue(WQ_UNBOUND | flags, 1, args..)

to 

  alloc_ordered_workqueue(flags, args...)

which don't cause any functional changes. If you know that fully ordered
execution is not ncessary, please let me know. I'll drop the conversion and
instead add a comment noting the fact to reduce confusion while conversion
is in progress.

If you aren't fully sure, it's completely fine to let the conversion
through. The behavior will stay exactly the same and we can always
reconsider later.

As there are follow-up workqueue core changes, I'd really appreciate if the
patch can be routed through the workqueue tree w/ your acks. Thanks.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Sunil Goutham <sgoutham@marvell.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: netdev@vger.kernel.org
2023-05-08 15:32:56 -10:00
Tejun Heo
44d69dd9ad greybus: Use alloc_ordered_workqueue() to create ordered workqueues
BACKGROUND
==========

When multiple work items are queued to a workqueue, their execution order
doesn't match the queueing order. They may get executed in any order and
simultaneously. When fully serialized execution - one by one in the queueing
order - is needed, an ordered workqueue should be used which can be created
with alloc_ordered_workqueue().

However, alloc_ordered_workqueue() was a later addition. Before it, an
ordered workqueue could be obtained by creating an UNBOUND workqueue with
@max_active==1. This originally was an implementation side-effect which was
broken by 4c16bd327c ("workqueue: restore WQ_UNBOUND/max_active==1 to be
ordered"). Because there were users that depended on the ordered execution,
5c0338c687 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
made workqueue allocation path to implicitly promote UNBOUND workqueues w/
@max_active==1 to ordered workqueues.

While this has worked okay, overloading the UNBOUND allocation interface
this way creates other issues. It's difficult to tell whether a given
workqueue actually needs to be ordered and users that legitimately want a
min concurrency level wq unexpectedly gets an ordered one instead. With
planned UNBOUND workqueue updates to improve execution locality and more
prevalence of chiplet designs which can benefit from such improvements, this
isn't a state we wanna be in forever.

This patch series audits all callsites that create an UNBOUND workqueue w/
@max_active==1 and converts them to alloc_ordered_workqueue() as necessary.

WHAT TO LOOK FOR
================

The conversions are from

  alloc_workqueue(WQ_UNBOUND | flags, 1, args..)

to 

  alloc_ordered_workqueue(flags, args...)

which don't cause any functional changes. If you know that fully ordered
execution is not ncessary, please let me know. I'll drop the conversion and
instead add a comment noting the fact to reduce confusion while conversion
is in progress.

If you aren't fully sure, it's completely fine to let the conversion
through. The behavior will stay exactly the same and we can always
reconsider later.

As there are follow-up workqueue core changes, I'd really appreciate if the
patch can be routed through the workqueue tree w/ your acks. Thanks.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Alex Elder <elder@kernel.org>
Cc: greybus-dev@lists.linaro.org
2023-05-08 13:52:27 -10:00
Tejun Heo
bd54522466 powerpc, workqueue: Use alloc_ordered_workqueue() to create ordered workqueues
BACKGROUND
==========

When multiple work items are queued to a workqueue, their execution order
doesn't match the queueing order. They may get executed in any order and
simultaneously. When fully serialized execution - one by one in the queueing
order - is needed, an ordered workqueue should be used which can be created
with alloc_ordered_workqueue().

However, alloc_ordered_workqueue() was a later addition. Before it, an
ordered workqueue could be obtained by creating an UNBOUND workqueue with
@max_active==1. This originally was an implementation side-effect which was
broken by 4c16bd327c ("workqueue: restore WQ_UNBOUND/max_active==1 to be
ordered"). Because there were users that depended on the ordered execution,
5c0338c687 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
made workqueue allocation path to implicitly promote UNBOUND workqueues w/
@max_active==1 to ordered workqueues.

While this has worked okay, overloading the UNBOUND allocation interface
this way creates other issues. It's difficult to tell whether a given
workqueue actually needs to be ordered and users that legitimately want a
min concurrency level wq unexpectedly gets an ordered one instead. With
planned UNBOUND workqueue updates to improve execution locality and more
prevalence of chiplet designs which can benefit from such improvements, this
isn't a state we wanna be in forever.

This patch series audits all callsites that create an UNBOUND workqueue w/
@max_active==1 and converts them to alloc_ordered_workqueue() as necessary.

WHAT TO LOOK FOR
================

The conversions are from

  alloc_workqueue(WQ_UNBOUND | flags, 1, args..)

to 

  alloc_ordered_workqueue(flags, args...)

which don't cause any functional changes. If you know that fully ordered
execution is not ncessary, please let me know. I'll drop the conversion and
instead add a comment noting the fact to reduce confusion while conversion
is in progress.

If you aren't fully sure, it's completely fine to let the conversion
through. The behavior will stay exactly the same and we can always
reconsider later.

As there are follow-up workqueue core changes, I'd really appreciate if the
patch can be routed through the workqueue tree w/ your acks. Thanks.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
2023-05-08 13:52:27 -10:00
Dietmar Eggemann
2ef269ef1a cgroup/cpuset: Free DL BW in case can_attach() fails
cpuset_can_attach() can fail. Postpone DL BW allocation until all tasks
have been checked. DL BW is not allocated per-task but as a sum over
all DL tasks migrating.

If multiple controllers are attached to the cgroup next to the cpuset
controller a non-cpuset can_attach() can fail. In this case free DL BW
in cpuset_cancel_attach().

Finally, update cpuset DL task count (nr_deadline_tasks) only in
cpuset_attach().

Suggested-by: Waiman Long <longman@redhat.com>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2023-05-08 13:22:33 -10:00
Dietmar Eggemann
85989106fe sched/deadline: Create DL BW alloc, free & check overflow interface
While moving a set of tasks between exclusive cpusets,
cpuset_can_attach() -> task_can_attach() calls dl_cpu_busy(..., p) for
DL BW overflow checking and per-task DL BW allocation on the destination
root_domain for the DL tasks in this set.

This approach has the issue of not freeing already allocated DL BW in
the following error cases:

(1) The set of tasks includes multiple DL tasks and DL BW overflow
    checking fails for one of the subsequent DL tasks.

(2) Another controller next to the cpuset controller which is attached
    to the same cgroup fails in its can_attach().

To address this problem rework dl_cpu_busy():

(1) Split it into dl_bw_check_overflow() & dl_bw_alloc() and add a
    dedicated dl_bw_free().

(2) dl_bw_alloc() & dl_bw_free() take a `u64 dl_bw` parameter instead of
    a `struct task_struct *p` used in dl_cpu_busy(). This allows to
    allocate DL BW for a set of tasks too rather than only for a single
    task.

Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2023-05-08 13:22:33 -10:00
Juri Lelli
c0f78fd5ed cgroup/cpuset: Iterate only if DEADLINE tasks are present
update_tasks_root_domain currently iterates over all tasks even if no
DEADLINE task is present on the cpuset/root domain for which bandwidth
accounting is being rebuilt. This has been reported to introduce 10+ ms
delays on suspend-resume operations.

Skip the costly iteration for cpusets that don't contain DEADLINE tasks.

Reported-by: Qais Yousef <qyousef@layalina.io>
Link: https://lore.kernel.org/lkml/20230206221428.2125324-1-qyousef@layalina.io/
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2023-05-08 13:22:33 -10:00
Juri Lelli
6c24849f55 sched/cpuset: Keep track of SCHED_DEADLINE task in cpusets
Qais reported that iterating over all tasks when rebuilding root domains
for finding out which ones are DEADLINE and need their bandwidth
correctly restored on such root domains can be a costly operation (10+
ms delays on suspend-resume).

To fix the problem keep track of the number of DEADLINE tasks belonging
to each cpuset and then use this information (followup patch) to only
perform the above iteration if DEADLINE tasks are actually present in
the cpuset for which a corresponding root domain is being rebuilt.

Reported-by: Qais Yousef <qyousef@layalina.io>
Link: https://lore.kernel.org/lkml/20230206221428.2125324-1-qyousef@layalina.io/
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2023-05-08 13:22:33 -10:00
Juri Lelli
111cd11bbc sched/cpuset: Bring back cpuset_mutex
Turns out percpu_cpuset_rwsem - commit 1243dc518c ("cgroup/cpuset:
Convert cpuset_mutex to percpu_rwsem") - wasn't such a brilliant idea,
as it has been reported to cause slowdowns in workloads that need to
change cpuset configuration frequently and it is also not implementing
priority inheritance (which causes troubles with realtime workloads).

Convert percpu_cpuset_rwsem back to regular cpuset_mutex. Also grab it
only for SCHED_DEADLINE tasks (other policies don't care about stable
cpusets anyway).

Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2023-05-08 13:22:33 -10:00
Juri Lelli
ad3a557daf cgroup/cpuset: Rename functions dealing with DEADLINE accounting
rebuild_root_domains() and update_tasks_root_domain() have neutral
names, but actually deal with DEADLINE bandwidth accounting.

Rename them to use 'dl_' prefix so that intent is more clear.

No functional change.

Suggested-by: Qais Yousef <qyousef@layalina.io>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2023-05-08 13:22:33 -10:00
Thomas Gleixner
f9d36cf445 tick/broadcast: Make broadcast device replacement work correctly
When a tick broadcast clockevent device is initialized for one shot mode
then tick_broadcast_setup_oneshot() OR's the periodic broadcast mode
cpumask into the oneshot broadcast cpumask.

This is required when switching from periodic broadcast mode to oneshot
broadcast mode to ensure that CPUs which are waiting for periodic
broadcast are woken up on the next tick.

But it is subtly broken, when an active broadcast device is replaced and
the system is already in oneshot (NOHZ/HIGHRES) mode. Victor observed
this and debugged the issue.

Then the OR of the periodic broadcast CPU mask is wrong as the periodic
cpumask bits are sticky after tick_broadcast_enable() set it for a CPU
unless explicitly cleared via tick_broadcast_disable().

That means that this sets all other CPUs which have tick broadcasting
enabled at that point unconditionally in the oneshot broadcast mask.

If the affected CPUs were already idle and had their bits set in the
oneshot broadcast mask then this does no harm. But for non idle CPUs
which were not set this corrupts their state.

On their next invocation of tick_broadcast_enable() they observe the bit
set, which indicates that the broadcast for the CPU is already set up.
As a consequence they fail to update the broadcast event even if their
earliest expiring timer is before the actually programmed broadcast
event.

If the programmed broadcast event is far in the future, then this can
cause stalls or trigger the hung task detector.

Avoid this by telling tick_broadcast_setup_oneshot() explicitly whether
this is the initial switch over from periodic to oneshot broadcast which
must take the periodic broadcast mask into account. In the case of
initialization of a replacement device this prevents that the broadcast
oneshot mask is modified.

There is a second problem with broadcast device replacement in this
function. The broadcast device is only armed when the previous state of
the device was periodic.

That is correct for the switch from periodic broadcast mode to oneshot
broadcast mode as the underlying broadcast device could operate in
oneshot state already due to lack of periodic state in hardware. In that
case it is already armed to expire at the next tick.

For the replacement case this is wrong as the device is in shutdown
state. That means that any already pending broadcast event will not be
armed.

This went unnoticed because any CPU which goes idle will observe that
the broadcast device has an expiry time of KTIME_MAX and therefore any
CPUs next timer event will be earlier and cause a reprogramming of the
broadcast device. But that does not guarantee that the events of the
CPUs which were already in idle are delivered on time.

Fix this by arming the newly installed device for an immediate event
which will reevaluate the per CPU expiry times and reprogram the
broadcast device accordingly. This is simpler than caching the last
expiry time in yet another place or saving it before the device exchange
and handing it down to the setup function. Replacement of broadcast
devices is not a frequent operation and usually happens once somewhere
late in the boot process.

Fixes: 9c336c9935 ("tick/broadcast: Allow late registered device to enter oneshot mode")
Reported-by: Victor Hassan <victor@allwinnertech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/87pm7d2z1i.ffs@tglx
2023-05-08 23:18:16 +02:00
Paul Moore
c52df19e37 selinux: small cleanups in selinux_audit_rule_init()
A few small tweaks to selinux_audit_rule_init():

- Adjust how we use the @rc variable so we are not doing any extra
  work in the common/success case.

- Related to the above, rework the 'out' jump label so that the
  success and error paths are different, simplifying both.

- Cleanup some of the vertical whitespace while we are making the
  other changes.

Signed-off-by: Paul Moore <paul@paul-moore.com>
2023-05-08 16:53:41 -04:00
Christian Göttsche
4158cb6000 selinux: declare read-only data arrays const
The array of mount tokens in only used in match_opt_prefix() and never
modified.

The array of symtab names is never modified and only used in the
DEBUG_HASHES configuration as output.

The array of files for the SElinux filesystem sub-directory `ss` is
similar to the other `struct tree_descr` usages only read from to
construct the containing entries.

Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2023-05-08 16:52:05 -04:00
Christian Göttsche
4595ae8c4a selinux: retain const qualifier on string literal in avtab_hash_eval()
The second parameter `tag` of avtab_hash_eval() is only used for
printing.  In policydb_index() it is called with a string literal:

    avtab_hash_eval(&p->te_avtab, "rules");

Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: slight formatting tweak in description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
2023-05-08 16:49:14 -04:00
Christian Göttsche
aeb060ec71 selinux: drop return at end of void function avc_insert()
Commit 539813e418 ("selinux: stop returning node from avc_insert()")
converted the return value of avc_insert() to void but left the now
unnecessary trailing return statement.

Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2023-05-08 16:47:32 -04:00
Christian Göttsche
757010002b selinux: avc: drop unused function avc_disable()
Since commit f22f9aaf6c ("selinux: remove the runtime disable
functionality") the function avc_disable() is no longer used.

Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2023-05-08 16:45:36 -04:00
Christian Göttsche
3d9047a064 selinux: adjust typos in comments
Found by codespell(1)

Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2023-05-08 16:44:01 -04:00
Christian Göttsche
53f3517ae0 selinux: do not leave dangling pointer behind
In case mls_context_cpy() fails due to OOM set the free'd pointer in
context_cpy() to NULL to avoid it potentially being dereferenced or
free'd again in future.  Freeing a NULL pointer is well-defined and a
hard NULL dereference crash is at least not exploitable and should give
a workable stack trace.

Fixes: 12b29f3455 ("selinux: support deferred mapping of contexts")
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2023-05-08 16:37:42 -04:00
Paul Moore
6f933aa7df selinux: more Makefile tweaks
A few small tweaks to improve the SELinux Makefile:

- Define a new variable, 'genhdrs', to represent both flask.h and
  av_permissions.h; this should help ensure consistent processing for
  both generated headers.

- Move the 'ccflags-y' variable closer to the top, just after the
  main 'obj-$(CONFIG_SECURITY_SELINUX)' definition to make it more
  visible and improve the grouping in the Makefile.

- Rework some of the vertical whitespace to improve some of the
  grouping in the Makefile.

Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2023-05-08 16:26:48 -04:00
Sudeep Holla
111a833dc5 firmware: arm_ffa: Set reserved/MBZ fields to zero in the memory descriptors
The transmit buffers allocated by the driver can be used to transmit data
by any messages/commands needing the buffer. However, it is not guaranteed
to have been zero-ed before every new transmission and hence it will just
contain residual value from the previous transmission. There are several
reserved fields in the memory descriptors that must be zero(MBZ). The
receiver can reject the transmission if any such MBZ fields are non-zero.

While we can set the whole page to zero, it is not optimal as most of the
fields get initialised to the value required for the current transmission.

So, just set the reserved/MBZ fields to zero in the memory descriptors
explicitly to honour the requirement and keep the receiver happy.

Fixes: cc2195fe53 ("firmware: arm_ffa: Add support for MEM_* interfaces")
Reported-by: Marc Bonnici <marc.bonnici@arm.com>
Link: https://lore.kernel.org/r/20230503131252.12585-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-05-08 20:40:46 +01:00
Sudeep Holla
19b8766459 firmware: arm_ffa: Fix FFA device names for logical partitions
Each physical partition can provide multiple services each with UUID.
Each such service can be presented as logical partition with a unique
combination of VM ID and UUID. The number of distinct UUID in a system
will be less than or equal to the number of logical partitions.

However, currently it fails to register more than one logical partition
or service within a physical partition as the device name contains only
VM ID while both VM ID and UUID are maintained in the partition information.
The kernel complains with the below message:

  | sysfs: cannot create duplicate filename '/devices/arm-ffa-8001'
  | CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.3.0-rc7 #8
  | Hardware name: FVP Base RevC (DT)
  | Call trace:
  |  dump_backtrace+0xf8/0x118
  |  show_stack+0x18/0x24
  |  dump_stack_lvl+0x50/0x68
  |  dump_stack+0x18/0x24
  |  sysfs_create_dir_ns+0xe0/0x13c
  |  kobject_add_internal+0x220/0x3d4
  |  kobject_add+0x94/0x100
  |  device_add+0x144/0x5d8
  |  device_register+0x20/0x30
  |  ffa_device_register+0x88/0xd8
  |  ffa_setup_partitions+0x108/0x1b8
  |  ffa_init+0x2ec/0x3a4
  |  do_one_initcall+0xcc/0x240
  |  do_initcall_level+0x8c/0xac
  |  do_initcalls+0x54/0x94
  |  do_basic_setup+0x1c/0x28
  |  kernel_init_freeable+0x100/0x16c
  |  kernel_init+0x20/0x1a0
  |  ret_from_fork+0x10/0x20
  | kobject_add_internal failed for arm-ffa-8001 with -EEXIST, don't try to
  | register things with the same name in the same directory.
  | arm_ffa arm-ffa: unable to register device arm-ffa-8001 err=-17
  | ARM FF-A: ffa_setup_partitions: failed to register partition ID 0x8001

By virtue of being random enough to avoid collisions when generated in a
distributed system, there is no way to compress UUID keys to the number
of bits required to identify each. We can eliminate '-' in the name but
it is not worth eliminating 4 bytes and add unnecessary logic for doing
that. Also v1.0 doesn't provide the UUID of the partitions which makes
it hard to use the same for the device name.

So to keep it simple, let us alloc an ID using ida_alloc() and append the
same to "arm-ffa" to make up a unique device name. Also stash the id value
in ffa_dev to help freeing the ID later when the device is destroyed.

Fixes: e781858488 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration")
Reported-by: Lucian Paul-Trifu <lucian.paul-trifu@arm.com>
Link: https://lore.kernel.org/r/20230419-ffa_fixes_6-4-v2-3-d9108e43a176@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-05-08 20:40:46 +01:00
Sudeep Holla
c6e045361a firmware: arm_ffa: Fix usage of partition info get count flag
Commit bb1be74985 ("firmware: arm_ffa: Add v1.1 get_partition_info support")
adds support to discovery the UUIDs of the partitions or just fetch the
partition count using the PARTITION_INFO_GET_RETURN_COUNT_ONLY flag.

However the commit doesn't handle the fact that the older version doesn't
understand the flag and must be MBZ which results in firmware returning
invalid parameter error. That results in the failure of the driver probe
which is in correct.

Limit the usage of the PARTITION_INFO_GET_RETURN_COUNT_ONLY flag for the
versions above v1.0(i.e v1.1 and onwards) which fixes the issue.

Fixes: bb1be74985 ("firmware: arm_ffa: Add v1.1 get_partition_info support")
Reported-by: Jens Wiklander <jens.wiklander@linaro.org>
Reported-by: Marc Bonnici <marc.bonnici@arm.com>
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Link: https://lore.kernel.org/r/20230419-ffa_fixes_6-4-v2-2-d9108e43a176@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-05-08 20:40:46 +01:00
Sudeep Holla
b71b55248a firmware: arm_ffa: Check if ffa_driver remove is present before executing
Currently ffa_drv->remove() is called unconditionally from
ffa_device_remove(). Since the driver registration doesn't check for it
and allows it to be registered without .remove callback, we need to check
for the presence of it before executing it from ffa_device_remove() to
above a NULL pointer dereference like the one below:

  | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
  | Mem abort info:
  |   ESR = 0x0000000086000004
  |   EC = 0x21: IABT (current EL), IL = 32 bits
  |   SET = 0, FnV = 0
  |   EA = 0, S1PTW = 0
  |   FSC = 0x04: level 0 translation fault
  | user pgtable: 4k pages, 48-bit VAs, pgdp=0000000881cc8000
  | [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
  | Internal error: Oops: 0000000086000004 [#1] PREEMPT SMP
  | CPU: 3 PID: 130 Comm: rmmod Not tainted 6.3.0-rc7 #6
  | Hardware name: FVP Base RevC (DT)
  | pstate: 63402809 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=-c)
  | pc : 0x0
  | lr : ffa_device_remove+0x20/0x2c
  | Call trace:
  |  0x0
  |  device_release_driver_internal+0x16c/0x260
  |  driver_detach+0x90/0xd0
  |  bus_remove_driver+0xdc/0x11c
  |  driver_unregister+0x30/0x54
  |  ffa_driver_unregister+0x14/0x20
  |  cleanup_module+0x18/0xeec
  |  __arm64_sys_delete_module+0x234/0x378
  |  invoke_syscall+0x40/0x108
  |  el0_svc_common+0xb4/0xf0
  |  do_el0_svc+0x30/0xa4
  |  el0_svc+0x2c/0x7c
  |  el0t_64_sync_handler+0x84/0xf0
  |  el0t_64_sync+0x190/0x194

Fixes: 244f5d597e ("firmware: arm_ffa: Add missing remove callback to ffa_bus_type")
Link: https://lore.kernel.org/r/20230419-ffa_fixes_6-4-v2-1-d9108e43a176@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-05-08 20:40:46 +01:00
Krzysztof Kozlowski
55b37d9c8b arm64: dts: arm: add missing cache properties
As all level 2 and level 3 caches are unified, add required
cache-unified properties to fix warnings like:

  foundation-v8.dtb: l2-cache0: 'cache-unified' is a required property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230421223213.115639-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-05-08 20:40:36 +01:00
Krzysztof Kozlowski
328acc5657 ARM: dts: vexpress: add missing cache properties
As all level 2 and level 3 caches are unified, add required
cache-unified property to fix warnings like:

  vexpress-v2p-ca5s.dtb: cache-controller@2c0f0000: 'cache-unified' is a required property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230423150837.118466-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-05-08 20:40:36 +01:00
Tejun Heo
44e8d5ad2d firmware: arm_scmi: Fix incorrect alloc_workqueue() invocation
scmi_xfer_raw_worker_init() is specifying a flag, WQ_SYSFS, as @max_active.
Fix it by or'ing WQ_SYSFS into @flags so that it actually enables sysfs
interface and using 0 for @max_active for the default setting.

Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 3c3d818a93 ("firmware: arm_scmi: Add core raw transmission support")
Link: https://lore.kernel.org/r/ZEGTnajiQm7mkkZS@slm.duckdns.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-05-08 20:40:25 +01:00
Stanislav Jakubek
79a8ec38d2 ARM: dts: bcm23550: Add SoC-specific I2C compatible
Add BCM23550-specific compatible for brcm,kona-i2c nodes. While not
currently used by the i2c-bcm-kona driver, they can serve for further
customization, if required.
Done in preparation for dt-binding coversion to DT schema.

Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Link: https://lore.kernel.org/r/9875ec0211187e4f5e2a4379c63eacdb69b31d7a.1682252615.git.stano.jakubek@gmail.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2023-05-08 11:54:05 -07:00
Rafał Miłecki
d3c8e2c575 ARM: dts: BCM5301X: Drop "clock-names" from the SPI node
There is no such property in the SPI controller binding documentation.
Also Linux driver doesn't look for it.

This fixes:
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: spi@18029200: Unevaluated properties are not allowed ('clock-names' was unexpected)
        From schema: Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20230503122830.3200-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2023-05-08 11:51:00 -07:00
Rafał Miłecki
9165534495 ARM: dts: BCM5301X: Relicense Florian's code to the GPL 2.0+ / MIT
All BCM5301X device DTS files use dual licensing. Try the same for SoC.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20230503121611.1629-2-zajec5@gmail.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2023-05-08 11:50:14 -07:00
Rafał Miłecki
915fac07f0 ARM: dts: BCM5301X: Relicense Rafał's code to the GPL 2.0+ / MIT
All BCM5301X device DTS files use dual licensing. Try the same for SoC.
Introduce a new .dtsi file with a proper SPDX tag.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20230503121611.1629-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2023-05-08 11:49:57 -07:00
Krzysztof Kozlowski
0db4bb045b ARM: dts: broadcom: add missing cache properties
As all level 2 and level 3 caches are unified, add required
cache-unified properties to fix warnings like:

  bcm963148.dtb: l2-cache0: 'cache-unified' is a required property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20230423150943.118576-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2023-05-08 11:24:39 -07:00
Krzysztof Kozlowski
0709e55ed1 arm64: dts: broadcom: add missing cache properties
As all level 2 and level 3 caches are unified, add required
cache-unified properties to fix warnings like:

  bcm94908.dtb: l2-cache0: 'cache-unified' is a required property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20230421223208.115555-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2023-05-08 11:23:53 -07:00
Christophe JAILLET
08c3eab525 f2fs: remove some dead code
'ret' is known to be 0 at the point.
So these lines of code should just be removed.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2023-05-08 11:18:04 -07:00
Li Zetao
1223e432d9 f2fs: remove redundant goto statement in f2fs_read_single_page()
After the commit "0a4ee51818", this "goto" statement was redundant,
remote it for clean code.

Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2023-05-08 11:18:04 -07:00
Yangtao Li
7cd2e5f75b f2fs: do not allow to defragment files have FI_COMPRESS_RELEASED
If a file has FI_COMPRESS_RELEASED, all writes for it should not be
allowed.

Fixes: 5fdb322ff2 ("f2fs: add F2FS_IOC_DECOMPRESS_FILE and F2FS_IOC_COMPRESS_FILE")
Signed-off-by: Qi Han <hanqi@vivo.com>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2023-05-08 11:18:04 -07:00
Yangtao Li
888ca6edac f2fs: add sanity check for proc_mkdir
Return -ENOMEM when proc_mkdir failed.

Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2023-05-08 11:18:04 -07:00
Chao Yu
b62e71be21 f2fs: support errors=remount-ro|continue|panic mountoption
This patch supports errors=remount-ro|continue|panic mount option
for f2fs.

f2fs behaves as below in three different modes:
mode			continue	remount-ro	panic
access ops		normal		noraml		N/A
syscall errors		-EIO		-EROFS		N/A
mount option		rw		ro		N/A
pending dir write	keep		keep		N/A
pending non-dir write	drop		keep		N/A
pending node write	drop		keep		N/A
pending meta write	keep		keep		N/A

By default it uses "continue" mode.

[Yangtao helps to clean up function's name]
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2023-05-08 11:18:04 -07:00
Dexuan Cui
ec97e11298 Drivers: hv: vmbus: Call hv_synic_free() if hv_synic_alloc() fails
Commit 572086325c ("Drivers: hv: vmbus: Cleanup synic memory free path")
says "Any memory allocations that succeeded will be freed when the caller
cleans up by calling hv_synic_free()", but if the get_zeroed_page() in
hv_synic_alloc() fails, currently hv_synic_free() is not really called
in vmbus_bus_init(), consequently there will be a memory leak, e.g.
hv_context.hv_numa_map is not freed in the error path. Fix this by
updating the goto labels.

Cc: stable@kernel.org
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Fixes: 4df4cb9e99 ("x86/hyperv: Initialize clockevents earlier in CPU onlining")
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20230504224155.10484-1-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
2023-05-08 17:37:20 +00:00
Mark Brown
dbcf76390e selftests/ftrace: Improve integration with kselftest runner
The ftrace selftests do not currently produce KTAP output, they produce a
custom format much nicer for human consumption. This means that when run in
automated test systems we just get a single result for the suite as a whole
rather than recording results for individual test cases, making it harder
to look at the test data and masking things like inappropriate skips.

Address this by adding support for KTAP output to the ftracetest script and
providing a trivial wrapper which will be invoked by the kselftest runner
to generate output in this format by default, users using ftracetest
directly will continue to get the existing output.

This is not the most elegant solution but it is simple and effective. I
did consider implementing this by post processing the existing output
format but that felt more complex and likely to result in all output being
lost if something goes seriously wrong during the run which would not be
helpful. I did also consider just writing a separate runner script but
there's enough going on with things like the signal handling for that to
seem like it would be duplicating too much.

Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Tested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-05-08 11:10:13 -06:00
Radhakrishna Sripada
5b8ff071b5 drm/i915/mtl: Fix the wa number for Wa_22016670082
Fixes the right lineage number for the workaround.

Fixes: a7fa1537b7 ("drm/i915/mtl: Implement Wa_14019141245")
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230505234544.4029535-1-radhakrishna.sripada@intel.com
2023-05-08 10:09:09 -07:00
Krzysztof Kozlowski
b8039b4e40 ARM: dts: s5pv210: remove empty camera pinctrl configuration
The camera's pinctrl configuration is simply empty and not effective.
Remove it to fix dtbs_check warnings like:

  s5pv210-torbreck.dtb: camera@fa600000: pinctrl-0: True is not of type 'array'

Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20230421190202.15471-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-05-08 19:03:13 +02:00
Krzysztof Kozlowski
b77904ba17 ARM: dts: s5pv210: add dummy 5V regulator for backlight on SMDKv210
Backlight is supplied by DC5V regulator.  The DTS has no PMIC node, so
just add a regulator-fixed to solve it and fix dtbs_check warning:

  s5pv210-smdkv210.dtb: backlight: 'power-supply' is a required property

Link: https://lore.kernel.org/r/20230421095721.31857-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-05-08 19:02:09 +02:00
Krzysztof Kozlowski
6175f658ae ARM: dts: s5pv210: re-order MFC clock names to match Exynos and bindings
Align the order of two MFC clocks with Exynos4 DTS and MFC bindings

Link: https://lore.kernel.org/r/20230328114729.61436-1-aakarsh.jain@samsung.com
Link: https://lore.kernel.org/r/20230421095721.31857-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-05-08 19:02:09 +02:00
Krzysztof Kozlowski
64f92c24aa ARM: dts: s5pv210: align USB node name with bindings
Bindings expect USB HSOTG controller node to be named "usb":

  s5pv210-torbreck.dtb: hsotg@ec000000: $nodename:0: 'hsotg@ec000000' does not match '^usb(@.*)?'

Link: https://lore.kernel.org/r/20230421095721.31857-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-05-08 19:02:09 +02:00
Krzysztof Kozlowski
7e98d36888 ARM: dts: s5pv210: align pin configuration nodes with bindings
Bindings expect that pins in initial and sleep states nodes end with
'-pin':

  s5pv210-fascinate4g.dtb: pinctrl@e0200000: sleep-state: 'gpa0-0', ...
    'mp07-7' do not match any of the regexes: '^(pin-[a-z0-9-]+|[a-z0-9-]+-pin)$', 'pinctrl-[0-9]+'

Link: https://lore.kernel.org/r/20230421095721.31857-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-05-08 19:02:08 +02:00