This patch will improve the depop function of CBJ detection before the headphone playback
when the system resumes.
We also want to complete the CBJ detection in the system-level resume function.
It could avoid triggering the detection at the playing state of headphones.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20230818023732.2153170-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In production we were seeing a variety of WARN_ON()'s in the extent_map
code, specifically in btrfs_drop_extent_map_range() when we have to call
add_extent_mapping() for our second split.
Consider the following extent map layout
PINNED
[0 16K) [32K, 48K)
and then we call btrfs_drop_extent_map_range for [0, 36K), with
skip_pinned == true. The initial loop will have
start = 0
end = 36K
len = 36K
we will find the [0, 16k) extent, but since we are pinned we will skip
it, which has this code
start = em_end;
if (end != (u64)-1)
len = start + len - em_end;
em_end here is 16K, so now the values are
start = 16K
len = 16K + 36K - 16K = 36K
len should instead be 20K. This is a problem when we find the next
extent at [32K, 48K), we need to split this extent to leave [36K, 48k),
however the code for the split looks like this
split->start = start + len;
split->len = em_end - (start + len);
In this case we have
em_end = 48K
split->start = 16K + 36K // this should be 16K + 20K
split->len = 48K - (16K + 36K) // this overflows as 16K + 36K is 52K
and now we have an invalid extent_map in the tree that potentially
overlaps other entries in the extent map. Even in the non-overlapping
case we will have split->start set improperly, which will cause problems
with any block related calculations.
We don't actually need len in this loop, we can simply use end as our
end point, and only adjust start up when we find a pinned extent we need
to skip.
Adjust the logic to do this, which keeps us from inserting an invalid
extent map.
We only skip_pinned in the relocation case, so this is relatively rare,
except in the case where you are running relocation a lot, which can
happen with auto relocation on.
Fixes: 55ef689900 ("Btrfs: Fix btrfs_drop_extent_cache for skip pinned case")
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch enables config option GENERIC_IDLE_POLL_SETUP for arch
powerpc. This adds support for kernel param 'nohlt'.
Powerpc kernel also supports another kernel boot-time param called
'powersave' which can also be used to disable all cpu idle-states and
forces CPU to an idle-loop similar to what cpu_idle_poll() does. This
patch however makes powerpc kernel-parameters better aligned to the
generic boot-time parameters.
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230818050739.827851-1-vaibhav@linux.ibm.com
The Instruction Fetch (IF) units on current AMD Zen-based systems do not
guarantee a synchronous #MC is delivered for poison consumption errors.
Therefore, MCG_STATUS[EIPV|RIPV] will not be set. However, the
microarchitecture does guarantee that the exception is delivered within
the same context. In other words, the exact rIP is not known, but the
context is known to not have changed.
There is no architecturally-defined method to determine this behavior.
The Code Segment (CS) register is always valid on such IF unit poison
errors regardless of the value of MCG_STATUS[EIPV|RIPV].
Add a quirk to save the CS register for poison consumption from the IF
unit banks.
This is needed to properly determine the context of the error.
Otherwise, the severity grading function will assume the context is
IN_KERNEL due to the m->cs value being 0 (the initialized value). This
leads to unnecessary kernel panics on data poison errors due to the
kernel believing the poison consumption occurred in kernel context.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230814200853.29258-1-yazen.ghannam@amd.com
The pinctrl group and function creation/remove calls expect
caller to take care of locking. Add lock around these functions.
Fixes: b59d0e7827 ("pinctrl: Add RZ/A2 pin and gpio controller")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230815131558.33787-4-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fix the below random NULL pointer crash during boot by serializing
pinctrl group and function creation/remove calls in
rzv2m_dt_subnode_to_map() with mutex lock.
Crash logs:
pc : __pi_strcmp+0x20/0x140
lr : pinmux_func_name_to_selector+0x68/0xa4
Call trace:
__pi_strcmp+0x20/0x140
pinmux_generic_add_function+0x34/0xcc
rzv2m_dt_subnode_to_map+0x2e4/0x418
rzv2m_dt_node_to_map+0x15c/0x18c
pinctrl_dt_to_map+0x218/0x37c
create_pinctrl+0x70/0x3d8
While at it, add a comment for lock.
Fixes: 92a9b82525 ("pinctrl: renesas: Add RZ/V2M pin and gpio controller driver")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230815131558.33787-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fix the below random NULL pointer crash during boot by serializing
pinctrl group and function creation/remove calls in
rzg2l_dt_subnode_to_map() with mutex lock.
Crash log:
pc : __pi_strcmp+0x20/0x140
lr : pinmux_func_name_to_selector+0x68/0xa4
Call trace:
__pi_strcmp+0x20/0x140
pinmux_generic_add_function+0x34/0xcc
rzg2l_dt_subnode_to_map+0x314/0x44c
rzg2l_dt_node_to_map+0x164/0x194
pinctrl_dt_to_map+0x218/0x37c
create_pinctrl+0x70/0x3d8
While at it, add comments for bitmap_lock and lock.
Fixes: c4c4637eb5 ("pinctrl: renesas: Add RZ/G2L pin and gpio controller driver")
Tested-by: Chris Paterson <Chris.Paterson2@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230815131558.33787-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The ext2 block allocation/deallocation functions and their respective
calls use a mixture of unsigned long and ext2_fsblk_t datatypes to
index the desired ext2 block. This commit replaces occurrences of
unsigned long with ext2_fsblk_t, covering the functions
ext2_new_block(), ext2_new_blocks(), ext2_free_blocks(),
ext2_free_data() and ext2_free_branches(). This commit is rather
conservative, and only replaces unsigned long with ext2_fsblk_t if
the variable is used to index a specific ext2 block.
Signed-off-by: Georg Ottinger <g.ottinger@gmx.at>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230817195925.10268-1-g.ottinger@gmx.at>
Specify how is SRSO mitigated when SMT is disabled. Also, correct the
SMT check for that.
Fixes: e9fbc47b81 ("x86/srso: Disable the mitigation on unaffected configurations")
Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20230814200813.p5czl47zssuej7nv@treble
Use the module_misc_device macro to simplify the code, which is the
same as declaring with module_init() and module_exit().
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230815075944.1089298-3-lizetao1@huawei.com
Signed-off-by: Lee Jones <lee@kernel.org>
Use the module_led_trigger macro to simplify the code, which is the
same as declaring with module_init() and module_exit().
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230815075944.1089298-2-lizetao1@huawei.com
Signed-off-by: Lee Jones <lee@kernel.org>
At least since the YAML conversion, the default-state property is
described in leds/common.yaml, so there's no need to point to another
file for its definition.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230814163116.1696092-1-j.neuschaefer@gmx.net
Signed-off-by: Lee Jones <lee@kernel.org>
Syzbot was able to trigger use of uninitialized memory in
af_alg_free_resources.
Bug is caused by missing initialization of rsgl->sgl.need_unpin before
adding to rsgl_list. Then in case of extract_iter_to_sg() failure, rsgl
is left with uninitialized need_unpin which is read during clean up
BUG: KMSAN: uninit-value in af_alg_free_sg crypto/af_alg.c:545 [inline]
BUG: KMSAN: uninit-value in af_alg_free_areq_sgls crypto/af_alg.c:778 [inline]
BUG: KMSAN: uninit-value in af_alg_free_resources+0x3d1/0xf60 crypto/af_alg.c:1117
af_alg_free_sg crypto/af_alg.c:545 [inline]
af_alg_free_areq_sgls crypto/af_alg.c:778 [inline]
af_alg_free_resources+0x3d1/0xf60 crypto/af_alg.c:1117
_skcipher_recvmsg crypto/algif_skcipher.c:144 [inline]
...
Uninit was created at:
slab_post_alloc_hook+0x12f/0xb70 mm/slab.h:767
slab_alloc_node mm/slub.c:3470 [inline]
__kmem_cache_alloc_node+0x536/0x8d0 mm/slub.c:3509
__do_kmalloc_node mm/slab_common.c:984 [inline]
__kmalloc+0x121/0x3c0 mm/slab_common.c:998
kmalloc include/linux/slab.h:586 [inline]
sock_kmalloc+0x128/0x1c0 net/core/sock.c:2683
af_alg_alloc_areq+0x41/0x2a0 crypto/af_alg.c:1188
_skcipher_recvmsg crypto/algif_skcipher.c:71 [inline]
Fixes: c1abe6f570 ("crypto: af_alg: Use extract_iter_to_sg() to create scatterlists")
Reported-and-tested-by: syzbot+cba21d50095623218389@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=cba21d50095623218389
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The IVSC driver only works in ACPI systems so make it depend on ACPI.
Compiling it elsewhere has little if any value.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 29006e196a ("media: pci: intel: ivsc: Add CSI submodule")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Invoke ibm,os-term call with rtas_call_unlocked(), without using the
RTAS spinlock, to avoid deadlock in the unlikely event of a machine
crash while making an RTAS call.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230609071404.425529-1-hbathini@linux.ibm.com
There are memory leaks reported by kmemleak:
...
unreferenced object 0xffff00213c141000 (size 1024):
comm "systemd-udevd", pid 2123, jiffies 4294909467 (age 6062.160s)
hex dump (first 32 bytes):
04 00 00 00 02 00 00 00 18 10 14 3c 21 00 ff ff ...........<!...
00 00 00 00 00 00 00 00 03 00 00 00 10 00 00 00 ................
backtrace:
[<000000004b7c9001>] __kmem_cache_alloc_node+0x2f8/0x348
[<00000000b0fc7ceb>] __kmalloc+0x58/0x108
[<0000000064ff4695>] acpi_os_allocate+0x2c/0x68
[<000000007d57d116>] acpi_ut_initialize_buffer+0x54/0xe0
[<0000000024583908>] acpi_evaluate_object+0x388/0x438
[<0000000017b2e72b>] acpi_evaluate_object_typed+0xe8/0x240
[<000000005df0eac2>] coresight_get_platform_data+0x1b4/0x988 [coresight]
...
The ACPI buffer memory (buf.pointer) should be freed. But the buffer
is also used after returning from acpi_get_dsd_graph().
Move the temporary variables buf to acpi_coresight_parse_graph(),
and free it before the function return to prevent memory leak.
Fixes: 76ffa5ab5b ("coresight: Support for ACPI bindings")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230817085937.55590-2-hejunhao3@huawei.com
Now all ASoC users have been replaced to use the new PCM copy ops,
let's drop the obsoleted copy_user ops and its helper function.
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230815190136.8987-25-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Update the documentation about the PCM copy callbacks.
The update was kept minimalistic, just correcting the use of copy_user
ops with the single copy ops, and drop/update the text mentioning the
copy_kernel.
Link: https://lore.kernel.org/r/20230815190136.8987-24-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Along with the conversion to PCM copy ops, use the iov_iter for the
pointer to be passed to the dmaengine process callback, too. It
avoids the direct reference of iter_iov_addr(), and it can potentially
help for the drivers to access memory properly (although both atmel
and stm drivers don't use the given buffer address at all for now).
Reviewed-by: Mark Brown <broonie@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Olivier Moysan <olivier.moysan@foss.st.com>
Cc: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20230815190136.8987-23-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the ASoC dmaenging driver code to use the new
unified PCM copy callback. It's a straightforward conversion from
*_user() to *_iter() variants.
The process callback is still using the direct pointer as of now, but
it'll be converted in the next patch.
Note that copy_from/to_iter() returns the copied bytes, hence the
error condition is adjusted accordingly.
Reviewed-by: Mark Brown <broonie@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20230815190136.8987-22-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the qcom lpass driver code to use the new unified
PCM copy callback. It's a straightforward conversion from *_user() to
*_iter() variants.
Note that copy_from/to_iter() returns the copied bytes, hence the
error condition is adjusted accordingly.
Reviewed-by: Mark Brown <broonie@kernel.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Banajit Goswami <bgoswami@quicinc.com>
Link: https://lore.kernel.org/r/20230815190136.8987-21-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the mediatek BT SCO driver code to use the new
unified PCM copy callback. It's a straightforward conversion from
*_user() to *_iter() variants. As copy_form/to_iter() updates the
internal offset at each read/write, we can drop the cur_*_idx counter
in the loop, too.
Note that copy_from/to_iter() returns the copied bytes, hence the
error condition is adjusted accordingly.
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230815190136.8987-20-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For following the ALSA PCM core change, a new PCM copy ops is added
toe ASoC component framework: snd_soc_component_driver receives the
copy ops, and snd_soc_pcm_component_copy() helper is provided.
This also fixes a long-standing potential bug where the ASoC driver
covers only copy_user PCM callback and misses the copy from kernel
pointers (such as OSS PCM layer), too.
As of this patch, the old copy_user is still kept, but it'll be
dropped later after all drivers are converted.
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230815190136.8987-19-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the solo6x10 driver code to use the new unified
PCM copy callback. It's a straightforward conversion from *_user() to
*_iter() variants. As copy_to_iter() updates the internal offest at
each write, we can drop the dst counter update in the loop, too.
Note that copy_to_iter() returns the copied bytes, hence the error
condition is adjusted accordingly.
Acked-by: Ismael Luceno <ismael@iodev.co.uk>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Bluecherry Maintainers <maintainers@bluecherrydvr.com>
Cc: Anton Sviridenko <anton@corp.bluecherry.net>
Cc: Andrey Utkin <andrey_utkin@fastmail.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-media@vger.kernel.org
Link: https://lore.kernel.org/r/20230815190136.8987-18-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the xen frontend driver code to use the new
unified PCM copy callback. It's a straightforward conversion from
*_user() to *_iter() variants.
Note that copy_from/to_iter() returns the copied bytes, hence the
error condition is adjusted accordingly.
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: xen-devel@lists.xenproject.org
Link: https://lore.kernel.org/r/20230815190136.8987-16-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the sh_dac_audio driver code to use the new
unified PCM copy callback. It's a straightforward conversion from
*_user() to *_iter() variants.
Link: https://lore.kernel.org/r/20230815190136.8987-15-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the rme9652 driver code to use the new unified PCM
copy callback. It's a straightforward conversion from *_user() to
*_iter() variants.
Note that copy_from/to_iter() returns the copied bytes, hence the
error condition is adjusted accordingly.
Link: https://lore.kernel.org/r/20230815190136.8987-14-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the hdsp driver code to use the new unified PCM
copy callback. It's a straightforward conversion from *_user() to
*_iter() variants.
Note that copy_from/to_iter() returns the copied bytes, hence the
error condition is adjusted accordingly.
Link: https://lore.kernel.org/r/20230815190136.8987-13-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the rme96 driver code to use the new unified PCM
copy callback. It's a straightforward conversion from *_user() to
*_iter() variants.
Link: https://lore.kernel.org/r/20230815190136.8987-12-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the rme32 driver code to use the new unified PCM
copy callback. It's a straightforward conversion from *_user() to
*_iter() variants.
Link: https://lore.kernel.org/r/20230815190136.8987-11-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the nm256 driver code to use the new unified PCM
copy callback. It's a straightforward conversion from *_user() to
*_iter() variants.
Link: https://lore.kernel.org/r/20230815190136.8987-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the korg1212 driver code to use the new unified
PCM copy callback. The open-coded conditional memory copies are
replaced with simpler copy_from/to_iter() calls.
Note that copy_from/to_iter() returns the copied bytes, hence the
error condition is adjusted accordingly.
Link: https://lore.kernel.org/r/20230815190136.8987-9-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the es1938 driver code to use the new unified PCM
copy callback. It's a straightforward conversion from *_user() to
*_iter() variants in most parts.
Note that copy_from/to_iter() returns the copied bytes, hence the
error condition is adjusted accordingly.
Link: https://lore.kernel.org/r/20230815190136.8987-8-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the SB Emu8000 driver code to use the new unified
PCM copy callback. The conversion is a bit complicated because of
many open code in emu8000_pcm.c. GET_VAL() and LOOP_WRITE() macros
were rewritten / simplified with copy_from_iter(). As
copy_from_iter() updates the internal offset value, we can drop the
corresponding part, too.
Link: https://lore.kernel.org/r/20230815190136.8987-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the GUS driver code to use the new unified PCM
copy callback. It's a straightforward conversion from *_user() to
*_iter() variants.
Note that copy_from/to_iter() returns the copied bytes, hence the
error condition is adjusted accordingly.
Link: https://lore.kernel.org/r/20230815190136.8987-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the dummy driver code to use the new unified PCM
copy callback. As dummy driver doesn't do anything in the callback,
it's just a simple replacement.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230815190136.8987-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add two more helpers for copying memory between iov_iter and iomem,
which will be used by the new PCM copy ops in a few drivers.
The existing helpers became wrappers of those now.
Note that copy_from/to_iter() returns the copied bytes, hence the
error condition is adjusted accordingly.
Link: https://lore.kernel.org/r/20230815190136.8987-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
iov_iter is a universal interface to copy the data chunk from/to
user-space and kernel in a unified manner. This API can fit for ALSA
PCM copy ops, too; we had to split to copy_user and copy_kernel in the
past, and those can be unified to a single ops with iov_iter.
This patch adds a new PCM copy ops that passes iov_iter for copying
both kernel and user-space in the same way. This patch touches only
the ALSA PCM core part, and the actual users will be replaced in the
following patches.
The expansion of iov_iter is done in the PCM core right before calling
each copy callback. It's a bit suboptimal, but I took this now as
it's the most straightforward replacement. The more conversion to
iov_iter in the caller side is a TODO for future.
As of now, the old copy_user and copy_kernel ops are still kept.
Once after all users are converted, we'll drop the old copy_user and
copy_kernel ops, too.
Link: https://lore.kernel.org/r/20230815190136.8987-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230714174409.4053843-1-robh@kernel.org
Convert the sun5i hstimer driver to a platform device driver.
This makes it work again on A20 and other systems where the
clock is provided by a platform device driver.
Fixes: 7ec03b588d ("clk: sunxi-ng: Convert early providers to platform drivers")
Signed-off-by: Mans Rullgard <mans@mansr.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230630201800.16501-4-mans@mansr.com
Remove the pointless struct added in the previous patch to make
the diff smaller.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230630201800.16501-3-mans@mansr.com
Move the clocksource and clock_event_device structs into the main
struct sun5i_timer, and update the code for the new layout. This
removes a lot of duplication of both code and data.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230630201800.16501-2-mans@mansr.com
Since commit 7ef9651e97 ("clk: Provide new devm_clk helpers for prepared
and enabled clocks"), devm_clk_get() and clk_prepare_enable() can now be
replaced by devm_clk_get_enabled() when driver enable (and possibly
prepare) the clocks for the whole lifetime of the device. Moreover, it is
no longer necessary to unprepare and disable the clock explicitly, so drop
the label "dis_clks" and "dis_clk_reg".
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Link: https://lore.kernel.org/r/20230818074642.308166-12-lizetao1@huawei.com
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Create tas2781 side codec HDA driver for Lenovo Laptops. The quantity
of the speakers has been define in ACPI. All of the tas2781s in the
laptop will be aggregated as one audio speaker. The code supports
realtek codec as the primary codec. Code offers several controls for
digtial/analog gain setting during playback, and other for eq params
setting in case of different audio profiles, such as music, voice,
movie, etc.
[ adjusted patch to be applied to the latest for-next branch -- tiwai ]
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://lore.kernel.org/r/20230818085836.1442-2-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Integrate tas2781 configs for Lenovo Laptops. All of the tas2781s in the
laptop will be aggregated as one audio device. The code support realtek
as the primary codec. Rename "struct cs35l41_dev_name" to
"struct scodec_dev_name" for all other side codecs instead of the certain
one.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://lore.kernel.org/r/20230818085836.1442-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
smatch reports
drivers/clocksource/timer-loongson1-pwm.c:31:1: warning: symbol
'ls1x_timer_lock' was not declared. Should it be static?
This variable is only used in its defining file, so it should be static.
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Keguang Zhang <keguang.zhang@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230702133113.3438049-1-trix@redhat.com
Due to the fact that the use of `writeq_relaxed()` to program CVAL is
not guaranteed to be atomic, it is necessary to disable the timer before
programming CVAL.
However, if the MMIO timer is already enabled and has not yet expired,
there is a possibility of unexpected behavior occurring: when the CPU
enters the idle state during this period, and if the CPU's local event
is earlier than the broadcast event, the following process occurs:
tick_broadcast_enter()
tick_broadcast_oneshot_control(TICK_BROADCAST_ENTER)
__tick_broadcast_oneshot_control()
___tick_broadcast_oneshot_control()
tick_broadcast_set_event()
clockevents_program_event()
set_next_event_mem()
During this process, the MMIO timer remains enabled while programming
CVAL. To prevent such behavior, disable timer explicitly prior to
programming CVAL.
Fixes: 8b82c4f883 ("clocksource/drivers/arm_arch_timer: Move MMIO timer programming over to CVAL")
Cc: stable@vger.kernel.org
Signed-off-by: Walter Chang <walter.chang@mediatek.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230717090735.19370-1-walter.chang@mediatek.com
