Commit graph

361,345 commits

Author SHA1 Message Date
H. Peter Anvin
d55c5a93db x86, 386 removal: Remove CONFIG_CMPXCHG
All 486+ CPUs support CMPXCHG, so remove the fallback 386 support
code.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/1354132230-21854-3-git-send-email-hpa@linux.intel.com
2012-11-29 13:23:01 -08:00
H. Peter Anvin
eb068e7810 x86, 386 removal: Remove CONFIG_M386 from Kconfig
Remove the CONFIG_M386 symbol from Kconfig so that it cannot be
selected.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/1354132230-21854-2-git-send-email-hpa@linux.intel.com
2012-11-29 13:23:01 -08:00
Luis R. Rodriguez
99057c8103 i915: convert struct spinlock to spinlock_t
spinlock_t should always be used.

  LD      drivers/gpu/drm/i915/built-in.o
  CHECK   drivers/gpu/drm/i915/i915_drv.c
  CC [M]  drivers/gpu/drm/i915/i915_drv.o
  CHECK   drivers/gpu/drm/i915/i915_dma.c
  CC [M]  drivers/gpu/drm/i915/i915_dma.o
  CHECK   drivers/gpu/drm/i915/i915_irq.c
  CC [M]  drivers/gpu/drm/i915/i915_irq.o
  CHECK   drivers/gpu/drm/i915/i915_debugfs.c
drivers/gpu/drm/i915/i915_debugfs.c:558:31: warning: dereference of noderef expression
drivers/gpu/drm/i915/i915_debugfs.c:558:39: warning: dereference of noderef expression
drivers/gpu/drm/i915/i915_debugfs.c:558:51: warning: dereference of noderef expression
drivers/gpu/drm/i915/i915_debugfs.c:558:63: warning: dereference of noderef expression
  CC [M]  drivers/gpu/drm/i915/i915_debugfs.o
  CHECK   drivers/gpu/drm/i915/i915_suspend.c
  CC [M]  drivers/gpu/drm/i915/i915_suspend.o
  CHECK   drivers/gpu/drm/i915/i915_gem.c
drivers/gpu/drm/i915/i915_gem.c:3703:14: warning: incorrect type in assignment (different base types)
drivers/gpu/drm/i915/i915_gem.c:3703:14:    expected unsigned int [unsigned] [usertype] mask
drivers/gpu/drm/i915/i915_gem.c:3703:14:    got restricted gfp_t
drivers/gpu/drm/i915/i915_gem.c:3706:22: warning: invalid assignment: &=
drivers/gpu/drm/i915/i915_gem.c:3706:22:    left side has type unsigned int
drivers/gpu/drm/i915/i915_gem.c:3706:22:    right side has type restricted gfp_t
drivers/gpu/drm/i915/i915_gem.c:3707:22: warning: invalid assignment: |=
drivers/gpu/drm/i915/i915_gem.c:3707:22:    left side has type unsigned int
drivers/gpu/drm/i915/i915_gem.c:3707:22:    right side has type restricted gfp_t
drivers/gpu/drm/i915/i915_gem.c:3711:39: warning: incorrect type in argument 2 (different base types)
drivers/gpu/drm/i915/i915_gem.c:3711:39:    expected restricted gfp_t [usertype] mask
drivers/gpu/drm/i915/i915_gem.c:3711:39:    got unsigned int [unsigned] [usertype] mask
  CC [M]  drivers/gpu/drm/i915/i915_gem.o
  CHECK   drivers/gpu/drm/i915/i915_gem_context.c
  CC [M]  drivers/gpu/drm/i915/i915_gem_context.o
  CHECK   drivers/gpu/drm/i915/i915_gem_debug.c
  CC [M]  drivers/gpu/drm/i915/i915_gem_debug.o
  CHECK   drivers/gpu/drm/i915/i915_gem_evict.c
  CC [M]  drivers/gpu/drm/i915/i915_gem_evict.o
  CHECK   drivers/gpu/drm/i915/i915_gem_execbuffer.c
  CC [M]  drivers/gpu/drm/i915/i915_gem_execbuffer.o
  CHECK   drivers/gpu/drm/i915/i915_gem_gtt.c
  CC [M]  drivers/gpu/drm/i915/i915_gem_gtt.o
  CHECK   drivers/gpu/drm/i915/i915_gem_stolen.c
  CC [M]  drivers/gpu/drm/i915/i915_gem_stolen.o
  CHECK   drivers/gpu/drm/i915/i915_gem_tiling.c
  CC [M]  drivers/gpu/drm/i915/i915_gem_tiling.o
  CHECK   drivers/gpu/drm/i915/i915_sysfs.c
  CC [M]  drivers/gpu/drm/i915/i915_sysfs.o
  CHECK   drivers/gpu/drm/i915/i915_trace_points.c
  CC [M]  drivers/gpu/drm/i915/i915_trace_points.o
  CHECK   drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_display.c:1736:9: warning: mixing different enum types
drivers/gpu/drm/i915/intel_display.c:1736:9:     int enum transcoder  versus
drivers/gpu/drm/i915/intel_display.c:1736:9:     int enum pipe
drivers/gpu/drm/i915/intel_display.c:3659:48: warning: mixing different enum types
drivers/gpu/drm/i915/intel_display.c:3659:48:     int enum pipe  versus
drivers/gpu/drm/i915/intel_display.c:3659:48:     int enum transcoder
  CC [M]  drivers/gpu/drm/i915/intel_display.o
  CHECK   drivers/gpu/drm/i915/intel_crt.c
  CC [M]  drivers/gpu/drm/i915/intel_crt.o
  CHECK   drivers/gpu/drm/i915/intel_lvds.c
  CC [M]  drivers/gpu/drm/i915/intel_lvds.o
  CHECK   drivers/gpu/drm/i915/intel_bios.c
drivers/gpu/drm/i915/intel_bios.c:706:60: warning: incorrect type in initializer (different address spaces)
drivers/gpu/drm/i915/intel_bios.c:706:60:    expected struct vbt_header *vbt
drivers/gpu/drm/i915/intel_bios.c:706:60:    got void [noderef] <asn:2>*vbt
drivers/gpu/drm/i915/intel_bios.c:726:42: warning: incorrect type in argument 1 (different address spaces)
drivers/gpu/drm/i915/intel_bios.c:726:42:    expected void const *<noident>
drivers/gpu/drm/i915/intel_bios.c:726:42:    got unsigned char [noderef] [usertype] <asn:2>*
drivers/gpu/drm/i915/intel_bios.c:727:40: warning: cast removes address space of expression
drivers/gpu/drm/i915/intel_bios.c:738:24: warning: cast removes address space of expression
  CC [M]  drivers/gpu/drm/i915/intel_bios.o
  CHECK   drivers/gpu/drm/i915/intel_ddi.c
drivers/gpu/drm/i915/intel_ddi.c:87:6: warning: symbol 'intel_prepare_ddi_buffers' was not declared. Should it be static?
drivers/gpu/drm/i915/intel_ddi.c:1036:34: warning: mixing different enum types
drivers/gpu/drm/i915/intel_ddi.c:1036:34:     int enum pipe  versus
drivers/gpu/drm/i915/intel_ddi.c:1036:34:     int enum transcoder
  CC [M]  drivers/gpu/drm/i915/intel_ddi.o
drivers/gpu/drm/i915/intel_ddi.c: In function ‘intel_ddi_setup_hw_pll_state’:
drivers/gpu/drm/i915/intel_ddi.c:1129:2: warning: ‘port’ may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/gpu/drm/i915/intel_ddi.c:1111:12: note: ‘port’ was declared here
  CHECK   drivers/gpu/drm/i915/intel_dp.c
  CC [M]  drivers/gpu/drm/i915/intel_dp.o
  CHECK   drivers/gpu/drm/i915/intel_hdmi.c
  CC [M]  drivers/gpu/drm/i915/intel_hdmi.o
  CHECK   drivers/gpu/drm/i915/intel_sdvo.c
  CC [M]  drivers/gpu/drm/i915/intel_sdvo.o
  CHECK   drivers/gpu/drm/i915/intel_modes.c
  CC [M]  drivers/gpu/drm/i915/intel_modes.o
  CHECK   drivers/gpu/drm/i915/intel_panel.c
  CC [M]  drivers/gpu/drm/i915/intel_panel.o
  CHECK   drivers/gpu/drm/i915/intel_pm.c
drivers/gpu/drm/i915/intel_pm.c:2173:1: warning: symbol 'mchdev_lock' was not declared. Should it be static?
  CC [M]  drivers/gpu/drm/i915/intel_pm.o
  CHECK   drivers/gpu/drm/i915/intel_i2c.c
  CC [M]  drivers/gpu/drm/i915/intel_i2c.o
  CHECK   drivers/gpu/drm/i915/intel_fb.c
  CC [M]  drivers/gpu/drm/i915/intel_fb.o
  CHECK   drivers/gpu/drm/i915/intel_tv.c
  CC [M]  drivers/gpu/drm/i915/intel_tv.o
  CHECK   drivers/gpu/drm/i915/intel_dvo.c
  CC [M]  drivers/gpu/drm/i915/intel_dvo.o
  CHECK   drivers/gpu/drm/i915/intel_ringbuffer.c
  CC [M]  drivers/gpu/drm/i915/intel_ringbuffer.o
  CHECK   drivers/gpu/drm/i915/intel_overlay.c
  CC [M]  drivers/gpu/drm/i915/intel_overlay.o
  CHECK   drivers/gpu/drm/i915/intel_sprite.c
  CC [M]  drivers/gpu/drm/i915/intel_sprite.o
  CHECK   drivers/gpu/drm/i915/intel_opregion.c
  CC [M]  drivers/gpu/drm/i915/intel_opregion.o
  CHECK   drivers/gpu/drm/i915/dvo_ch7xxx.c
  CC [M]  drivers/gpu/drm/i915/dvo_ch7xxx.o
  CHECK   drivers/gpu/drm/i915/dvo_ch7017.c
  CC [M]  drivers/gpu/drm/i915/dvo_ch7017.o
  CHECK   drivers/gpu/drm/i915/dvo_ivch.c
  CC [M]  drivers/gpu/drm/i915/dvo_ivch.o
  CHECK   drivers/gpu/drm/i915/dvo_tfp410.c
  CC [M]  drivers/gpu/drm/i915/dvo_tfp410.o
  CHECK   drivers/gpu/drm/i915/dvo_sil164.c
  CC [M]  drivers/gpu/drm/i915/dvo_sil164.o
  CHECK   drivers/gpu/drm/i915/dvo_ns2501.c
  CC [M]  drivers/gpu/drm/i915/dvo_ns2501.o
  CHECK   drivers/gpu/drm/i915/i915_gem_dmabuf.c
  CC [M]  drivers/gpu/drm/i915/i915_gem_dmabuf.o
  CHECK   drivers/gpu/drm/i915/i915_ioc32.c
  CC [M]  drivers/gpu/drm/i915/i915_ioc32.o
  CHECK   drivers/gpu/drm/i915/intel_acpi.c
  CC [M]  drivers/gpu/drm/i915/intel_acpi.o
  LD [M]  drivers/gpu/drm/i915/i915.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      drivers/gpu/drm/i915/i915.mod.o
  LD [M]  drivers/gpu/drm/i915/i915.ko

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Reported-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-29 21:49:17 +01:00
Rafael J. Wysocki
ad063fbbdd Merge branch 'pm-tools'
* pm-tools:
  cpupower: IvyBridge (0x3a and 0x3e models) support
  cpupower: Provide -c param for cpupower monitor to schedule process on all cores
  cpupower tools: Fix warning and a bug with the cpu package count
  cpupower tools: Fix malloc of cpu_info structure
  cpupower tools: Fix issues with sysfs_topology_read_file
  cpupower tools: Fix minor warnings
  cpupower tools: Update .gitignore for files created in the debug directories
  cpupower tools: Remove brace expansion from clean target
2012-11-29 21:47:44 +01:00
Rafael J. Wysocki
170bb4c800 Merge branch 'pm-sleep'
* pm-sleep:
  PM / Freezer: Fixup compile error of try_to_freeze_nowarn()
  driver core / PM: move the calling to device_pm_remove behind the calling to bus_remove_device
  PM / Hibernate: use rb_entry
  PM / sysfs: replace strict_str* with kstrto*
2012-11-29 21:46:48 +01:00
Rafael J. Wysocki
64adb0192f Merge branch 'pm-runtime'
* pm-runtime:
  base: power - use clk_prepare_enable and clk_prepare_disable
2012-11-29 21:46:41 +01:00
Rafael J. Wysocki
26ab93438f Merge branch 'pm-opp'
* pm-opp:
  PM / OPP: using kfree_rcu() to simplify the code
  PM / OPP: predictable fail results for opp_find* functions, v2
  PM / OPP: Export symbols for module usage.
  PM / OPP: RCU reclaim
2012-11-29 21:46:33 +01:00
Rafael J. Wysocki
9ee71f513c Merge branch 'pm-cpuidle'
* pm-cpuidle:
  cpuidle: Measure idle state durations with monotonic clock
  cpuidle: fix a suspicious RCU usage in menu governor
  cpuidle: support multiple drivers
  cpuidle: prepare the cpuidle core to handle multiple drivers
  cpuidle: move driver checking within the lock section
  cpuidle: move driver's refcount to cpuidle
  cpuidle: fixup device.h header in cpuidle.h
  cpuidle / sysfs: move structure declaration into the sysfs.c file
  cpuidle: Get typical recent sleep interval
  cpuidle: Set residency to 0 if target Cstate not enter
  cpuidle: Quickly notice prediction failure in general case
  cpuidle: Quickly notice prediction failure for repeat mode
  cpuidle / sysfs: move kobj initialization in the syfs file
  cpuidle / sysfs: change function parameter
2012-11-29 21:46:14 +01:00
Rafael J. Wysocki
aa84950674 Merge branch 'pm-cpufreq'
* pm-cpufreq: (21 commits)
  cpufreq: ondemand: update sampling rate only on right CPUs
  cpufreq: SPEAr: Add CPUFreq driver
  cpufreq: governors: Fix jiffies/cputime mixup (revisited)
  cpufreq: ondemand: fix wrong delay sampling rate
  cpufreq: exynos: Use static for functions used in only this file
  cpufreq: exynos: Broadcast frequency change notifications for all cores
  cpufreq: remove use of __devexit
  cpufreq: remove use of __devinit
  cpufreq: remove use of __devexit_p
  cpufreq: Remove unnecessary initialization of a local variable
  cpufreq: Make sure target freq is within limits
  cpufreq: Avoid calling cpufreq driver's target() routine if target_freq == policy->cur
  cpufreq: Fix sparse warning by making local function static
  cpufreq: Fix sparse warnings by updating cputime64_t to u64
  cpufreq: governors: remove redundant code
  cpufreq: return early from __cpufreq_driver_getavg()
  cpufreq: fix jiffies/cputime mixup in conservative/ondemand governors
  cpufreq: Improve debug prints
  cpufreq: Move common part from governors to separate file, v2
  cpufreq / core: Fix printing of governor and driver name
  ...
2012-11-29 21:46:04 +01:00
Rafael J. Wysocki
d4c091f13d Merge branch 'acpi-general'
* acpi-general: (38 commits)
  ACPI / thermal: _TMP and _CRT/_HOT/_PSV/_ACx dependency fix
  ACPI: drop unnecessary local variable from acpi_system_write_wakeup_device()
  ACPI: Fix logging when no pci_irq is allocated
  ACPI: Update Dock hotplug error messages
  ACPI: Update Container hotplug error messages
  ACPI: Update Memory hotplug error messages
  ACPI: Update CPU hotplug error messages
  ACPI: Add acpi_handle_<level>() interfaces
  ACPI: remove use of __devexit
  ACPI / PM: Add Sony Vaio VPCEB1S1E to nonvs blacklist.
  ACPI / battery: Correct battery capacity values on Thinkpads
  Revert "ACPI / x86: Add quirk for "CheckPoint P-20-00" to not use bridge _CRS_ info"
  ACPI: create _SUN sysfs file
  ACPI / memhotplug: bind the memory device when the driver is being loaded
  ACPI / memhotplug: don't allow to eject the memory device if it is being used
  ACPI / memhotplug: free memory device if acpi_memory_enable_device() failed
  ACPI / memhotplug: fix memory leak when memory device is unbound from acpi_memhotplug
  ACPI / memhotplug: deal with eject request in hotplug queue
  ACPI / memory-hotplug: add memory offline code to acpi_memory_device_remove()
  ACPI / memory-hotplug: call acpi_bus_trim() to remove memory device
  ...

Conflicts:
	include/linux/acpi.h (two additions at the end of the same file)
2012-11-29 21:43:06 +01:00
Rafael J. Wysocki
08ab72980a Merge branch 'acpica'
* acpica: (26 commits)
  ACPICA: Update version to 20121018
  ACPICA: AcpiGetObjectInfo: Add support for ACPI 5 _SUB method
  ACPICA: Update for 64-bit generation of recent error message changes
  ACPICA: Fix externalize name to complete migration to ACPI_MOVE_NAME
  ACPICA: Add starting offset parameter to common dump buffer routine
  ACPICA: Deploy ACPI_MOVE_NAME across ACPICA source base
  ACPICA: Update support for ACPI 5 MPST table
  ACPICA: Enhance error reporting for invalid opcodes and bad ACPI_NAMEs
  ACPICA: Add ACPI_MOVE_NAME macro to optimize 4-byte ACPI_NAME copies
  ACPICA: AcpiExec: Improve algorithm for tracking memory leaks
  ACPICA: Add debug print message for mutex objects that are force-released
  ACPICA: Resource Mgr: Small fix for buffer size calculation
  ACPICA: Remove extra spaces after periods in the Intel license
  ACPICA: Remove extra spaces after periods within comments
  ACPICA: Update local C library module comments for ASCII table
  ACPICA: Fix for predefined name loop during ACPICA initialization
  ACPICA: Fix some typos in comments
  ACPICA: ACPICA core: Cleanup empty lines at file start and end
  ACPICA: Audit/update for ACPICA return macros and debug depth counter
  ACPICA: Fix unmerged acmacros.h divergences.
  ...
2012-11-29 21:41:41 +01:00
Rafael J. Wysocki
bcacbdbdc8 Merge branch 'acpi-enumeration'
* acpi-enumeration:
  ACPI: remove unnecessary INIT_LIST_HEAD
  ACPI / platform: include missed header into acpi_platform.c
  platform / ACPI: Attach/detach ACPI PM during probe/remove/shutdown
  mmc: sdhci-acpi: add SDHCI ACPI driver
  ACPI: add SDHCI to ACPI platform devices
  ACPI / PNP: skip ACPI device nodes associated with physical nodes already
  i2c / ACPI: add ACPI enumeration support
  ACPI / platform: Initialize ACPI handles of platform devices in advance
  ACPI / driver core: Introduce struct acpi_dev_node and related macros
  ACPI: Allow ACPI handles of devices to be initialized in advance
  ACPI / resources: Use AE_CTRL_TERMINATE to terminate resources walks
  ACPI: Centralized processing of ACPI device resources
  ACPI / platform: Use common ACPI device resource parsing routines
  ACPI: Move device resources interpretation code from PNP to ACPI core
  ACPI / platform: use ACPI device name instead of _HID._UID
  ACPI: Add support for platform bus type
  ACPI / ia64: Export acpi_[un]register_gsi()
  ACPI / x86: Export acpi_[un]register_gsi()
  ACPI: Provide generic functions for matching ACPI device nodes
  driver core / ACPI: Move ACPI support to core device and driver types
2012-11-29 21:41:25 +01:00
Rafael J. Wysocki
acd844333c Merge branch 'acpi-dev-pm'
* acpi-dev-pm:
  ACPI / PM: Allow attach/detach routines to change device power states
  ACPI / PM: Introduce os_accessible flag for power_state
  ACPI / PM: Add check preventing transitioning to non-D0 state from D3.
  ACPI / PM: Fix build problem when CONFIG_ACPI or CONFIG_PM is not set
  ACPI / PM: Fix build problem related to acpi_target_system_state()
  ACPI / PM: Provide ACPI PM callback routines for subsystems
  ACPI / PM: Move device PM functions related to sleep states
  ACPI / PM: Provide device PM functions operating on struct acpi_device
  ACPI / PM: Split device wakeup management routines
  ACPI / PM: Move runtime remote wakeup setup routine to device_pm.c
  ACPI / PM: Move device power state selection routine to device_pm.c
  ACPI / PM: Move routines for adding/removing device wakeup notifiers
  ACPI / PM: Fix device PM kernedoc comments and #ifdefs
2012-11-29 21:41:11 +01:00
Rafael J. Wysocki
c8b6817103 Merge branch 'pm-qos'
* pm-qos:
  PM / QoS: Handle device PM QoS flags while removing constraints
  PM / QoS: Resume device before exposing/hiding PM QoS flags
  PM / QoS: Document request manipulation requirement for flags
  PM / QoS: Fix a free error in the dev_pm_qos_constraints_destroy()
  PM / QoS: Fix the return value of dev_pm_qos_update_request()
  PM / ACPI: Take device PM QoS flags into account
  PM / Domains: Check device PM QoS flags in pm_genpd_poweroff()
  PM / QoS: Make it possible to expose PM QoS device flags to user space
  PM / QoS: Introduce PM QoS device flags support
  PM / QoS: Prepare struct dev_pm_qos_request for more request types
  PM / QoS: Introduce request and constraint data types for PM QoS flags
  PM / QoS: Prepare device structure for adding more constraint types
2012-11-29 21:40:32 +01:00
Linus Torvalds
ab73857e35 direct-io: don't read inode->i_blkbits multiple times
Since directio can work on a raw block device, and the block size of the
device can change under it, we need to do the same thing that
fs/buffer.c now does: read the block size a single time, using
ACCESS_ONCE().

Reading it multiple times can get different results, which will then
confuse the code because it actually encodes the i_blksize in
relationship to the underlying logical blocksize.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-29 12:38:44 -08:00
Dave Chinner
b870553cde xfs: fix stray dquot unlock when reclaiming dquots
When we fail to get a dquot lock during reclaim, we jump to an error
handler that unlocks the dquot. This is wrong as we didn't lock the
dquot, and unlocking it means who-ever is holding the lock has had
it silently taken away, and hence it results in a lock imbalance.

Found by inspection while modifying the code for the numa-lru
patchset. This fixes a random hang I've been seeing on xfstest 232
for the past several months.

cc: <stable@vger.kernel.org>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-29 14:24:03 -06:00
Dave Chinner
437a255aa2 xfs: fix direct IO nested transaction deadlock.
The direct IO path can do a nested transaction reservation when
writing past the EOF. The first transaction is the append
transaction for setting the filesize at IO completion, but we can
also need a transaction for allocation of blocks. If the log is low
on space due to reservations and small log, the append transaction
can be granted after wating for space as the only active transaction
in the system. This then attempts a reservation for an allocation,
which there isn't space in the log for, and the reservation sleeps.
The result is that there is nothing left in the system to wake up
all the processes waiting for log space to come free.

The stack trace that shows this deadlock is relatively innocuous:

 xlog_grant_head_wait
 xlog_grant_head_check
 xfs_log_reserve
 xfs_trans_reserve
 xfs_iomap_write_direct
 __xfs_get_blocks
 xfs_get_blocks_direct
 do_blockdev_direct_IO
 __blockdev_direct_IO
 xfs_vm_direct_IO
 generic_file_direct_write
 xfs_file_dio_aio_writ
 xfs_file_aio_write
 do_sync_write
 vfs_write

This was discovered on a filesystem with a log of only 10MB, and a
log stripe unit of 256k whih increased the base reservations by
512k. Hence a allocation transaction requires 1.2MB of log space to
be available instead of only 260k, and so greatly increased the
chance that there wouldn't be enough log space available for the
nested transaction to succeed. The key to reproducing it is this
mkfs command:

mkfs.xfs -f -d agcount=16,su=256k,sw=12 -l su=256k,size=2560b $SCRATCH_DEV

The test case was a 1000 fsstress processes running with random
freeze and unfreezes every few seconds. Thanks to Eryu Guan
(eguan@redhat.com) for writing the test that found this on a system
with a somewhat unique default configuration....

cc: <stable@vger.kernel.org>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andrew Dahl <adahl@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-29 14:22:56 -06:00
Dave Chinner
ef9d873344 xfs: byte range granularity for XFS_IOC_ZERO_RANGE
XFS_IOC_ZERO_RANGE simply does not work properly for non page cache
aligned ranges. Neither test 242 or 290 exercise this correctly, so
the behaviour is completely busted even though the tests pass.

Fix it to support full byte range granularity as was originally
intended for this ioctl.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-29 14:21:46 -06:00
Roland Dreier
78c90247af Merge branches 'cma' and 'mlx4' into for-next 2012-11-29 12:16:43 -08:00
shefty
63f05be2c0 RDMA/cm: Change return value from find_gid_port()
Problem reported by Dan Carpenter <dan.carpenter@oracle.com>:

The patch 3c86aa70bf: "RDMA/cm: Add RDMA CM support for IBoE
devices" from Oct 13, 2010, leads to the following warning:
net/sunrpc/xprtrdma/svc_rdma_transport.c:722 svc_rdma_create()
	 error: passing non neg 1 to ERR_PTR

This bug would result in a NULL dereference.  svc_rdma_create() is
supposed to return ERR_PTRs or valid pointers, but instead it returns
ERR_PTRs, valid pointers and 1.

The call tree is:

svc_rdma_create()
   => rdma_bind_addr()
      => cma_acquire_dev()
         => find_gid_port()

rdma_bind_addr() should return a valid errno.  Fix this by having
find_gid_port() also return a valid errno.  If we can't find the
specified GID on a given port, return -EADDRNOTAVAIL, rather than
-EAGAIN, to better indicate the error.  We also drop using the
special return value of '1' and instead pass through the error
returned by the underlying verbs call.  On such errors, rather
than aborting the search,  we simply continue to check the next
device/port.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-11-29 12:16:29 -08:00
Jack Morgenstein
311f813a2d mlx4_core: Fix potential deadlock in mlx4_eq_int()
The slave_state_lock spinlock is used in both interrupt context and
process context, hence irq locking must be used.  Found by lockdep.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-11-29 12:14:54 -08:00
Jack Morgenstein
ceb7decb36 IB/mlx4: Fix spinlock order to avoid lockdep warnings
lockdep warns about taking a hard-irq-unsafe lock (sriov->id_map_lock)
inside a hard-irq-safe lock (sriov->going_down_lock).

Since id_map_lock is never taken in the interrupt context, we can
simply reverse the order of taking the two spinlocks, thus avoiding
the warning and the depencency.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-11-29 12:14:45 -08:00
Linus Torvalds
1e8b33328a blockdev: remove bd_block_size_semaphore again
This reverts the block-device direct access code to the previous
unlocked code, now that fs/buffer.c no longer needs external locking.

With this, fs/block_dev.c is back to the original version, apart from a
whitespace cleanup that I didn't want to revert.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-29 10:52:19 -08:00
Linus Torvalds
45bce8f3e3 fs/buffer.c: make block-size be per-page and protected by the page lock
This makes the buffer size handling be a per-page thing, which allows us
to not have to worry about locking too much when changing the buffer
size.  If a page doesn't have buffers, we still need to read the block
size from the inode, but we can do that with ACCESS_ONCE(), so that even
if the size is changing, we get a consistent value.

This doesn't convert all functions - many of the buffer functions are
used purely by filesystems, which in turn results in the buffer size
being fixed at mount-time.  So they don't have the same consistency
issues that the raw device access can have.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-29 10:47:20 -08:00
Rami Rosen
bb728820fe core: make GRO methods static.
This patch changes three methods to be static and removes their
EXPORT_SYMBOLs in core/dev.c and their external declaration in
netdevice.h. The methods, dev_gro_receive(), napi_frags_finish() and
napi_skb_finish(), which are in the GRO rx path, are not used
outside core/dev.c.

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-29 13:18:32 -05:00
Rick Jones
7e3a2dc529 doc: make the description of how tcp_ecn works more explicit and clear
Make the description of how tcp_ecn works a bit more explicit and clear.

Signed-off-by: Rick Jones <rick.jones2@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-29 13:14:58 -05:00
nikolay@redhat.com
e196c0e579 bonding: fix race condition in bonding_store_slaves_active
Race between bonding_store_slaves_active() and slave manipulation
 functions. The bond_for_each_slave use in bonding_store_slaves_active()
 is not protected by any synchronization mechanism.
 NULL pointer dereference is easy to reach.
 Fixed by acquiring the bond->lock for the slave walk.

 v2: Make description text < 75 columns

Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-29 13:13:15 -05:00
nikolay@redhat.com
90fb6250c5 bonding: make arp_ip_target parameter checks consistent with sysfs
The module can be loaded with arp_ip_target="255.255.255.255" which makes
 it impossible to remove as the function in sysfs checks for that value,
 so we make the parameter checks consistent with sysfs.

 v2: Fix formatting
 v3: Make description text < 75 columns

Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-29 13:13:15 -05:00
nikolay@redhat.com
fbb0c41b81 bonding: fix miimon and arp_interval delayed work race conditions
First I would give three observations which will be used later.
Observation 1: if (delayed_work_pending(wq)) cancel_delayed_work(wq)
 This usage is wrong because the pending bit is cleared just before the
 work's fn is executed and if the function re-arms itself we might end up
 with the work still running. It's safe to call cancel_delayed_work_sync()
 even if the work is not queued at all.
Observation 2: Use of INIT_DELAYED_WORK()
 Work needs to be initialized only once prior to (de/en)queueing.
Observation 3: IFF_UP is set only after ndo_open is called

Related race conditions:
1. Race between bonding_store_miimon() and bonding_store_arp_interval()
 Because of Obs.1 we can end up having both works enqueued.
2. Multiple races with INIT_DELAYED_WORK()
 Since the works are not protected by anything between INIT_DELAYED_WORK()
 and calls to (en/de)queue it is possible for races between the following
 functions:
 (races are also possible between the calls to INIT_DELAYED_WORK()
  and workqueue code)
 bonding_store_miimon() - bonding_store_arp_interval(), bond_close(),
			  bond_open(), enqueued functions
 bonding_store_arp_interval() - bonding_store_miimon(), bond_close(),
				bond_open(), enqueued functions
3. By Obs.1 we need to change bond_cancel_all()

Bugs 1 and 2 are fixed by moving all work initializations in bond_open
which by Obs. 2 and Obs. 3 and the fact that we make sure that all works
are cancelled in bond_close(), is guaranteed not to have any work
enqueued.
Also RTNL lock is now acquired in bonding_store_miimon/arp_interval so
they can't race with bond_close and bond_open. The opposing work is
cancelled only if the IFF_UP flag is set and it is cancelled
unconditionally. The opposing work is already cancelled if the interface
is down so no need to cancel it again. This way we don't need new
synchronizations for the bonding workqueue. These bugs (and fixes) are
tied together and belong in the same patch.
Note: I have left 1 line intentionally over 80 characters (84) because I
      didn't like how it looks broken down. If you'd prefer it otherwise,
      then simply break it.

 v2: Make description text < 75 columns

Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-29 13:13:15 -05:00
David S. Miller
8a2cf062b2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-29 12:51:17 -05:00
Simon Wunderlich
c04d61500d nl80211: Fix HT_IBSS feature check in ibss_join
There is a standalone if, seems to be a regression of commit
"nl80211/cfg80211: add VHT MCS support".

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-29 18:44:57 +01:00
Alexander Sverdlin
f3b6159e6a of/spi: Honour "status=disabled" property of device
Currently of_register_spi_devices() function registers all SPI devices,
independetly from their status property in device tree. According to
"ePAPR 1.1" spec, device should only be registered if there is no
"status" property, or it has "ok" (or "okay") value (see
of_device_is_available()). In case of "platform devices",
of_platform_device_create_pdata() checks for "status" and ensures
that disabled devices are not pupulated. But such check for SPI buses
was missing until now. Fix it.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@sysgo.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-11-29 17:36:57 +00:00
Alexander Sverdlin
e207e7619c of_mdio: Honour "status=disabled" property of device
Currently of_mdiobus_register() function registers all PHY devices,
independetly from their status property in device tree. According to
"ePAPR 1.1" spec, device should only be registered if there is no
"status" property, or it has "ok" (or "okay") value (see
of_device_is_available()). In case of "platform devices",
of_platform_device_create_pdata() checks for "status" and ensures
that disabled devices are not pupulated. But such check for MDIO buses
was missing until now. Fix it.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@sysgo.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-11-29 17:36:16 +00:00
Alexander Shiyan
1a22e16fc3 Input: gpio-keys-polled - honor 'autorepeat' setting in platform data
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-29 09:31:26 -08:00
Dmitry Torokhov
16ff7cb184 Input: tca8418-keypad - switch to using managed resources
Let's switch to using devm_*() interfaces to manage our resources,
thus will simplify error unwinding a bit.

Reviewed-by: Alban Bedel <alban.bedel@avionic-design.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-29 09:30:49 -08:00
Dmitry Torokhov
91c5d67f17 Input: tca8418_keypad - increase severity of failures in probe()
Failures to build a keymap, request an IRQ, or register input device are
fatal for the driver, therefore the messages should have "error" severity
instead of "debug".

Reviewed-by: Alban Bedel <alban.bedel@avionic-design.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-29 09:30:36 -08:00
Dmitry Torokhov
5cc0dfe043 Input: tca8418_keypad - move device ID tables closer to where they are used
This matches structure of most other input drivers.

Reviewed-by: Alban Bedel <alban.bedel@avionic-design.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-29 09:30:22 -08:00
Dmitry Torokhov
cdbe8a8637 Input: tca8418_keypad - use dev_get_platdata() to retrieve platform data
We need to use proper accessor functions instead of directly poking into
various structures.

Reviewed-by: Alban Bedel <alban.bedel@avionic-design.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-29 09:30:03 -08:00
Dmitry Torokhov
efce8a4121 Input: tca8418_keypad - use a temporary variable for parent device
Use a temporary variable for our parent device (coming from I2C client
structure); we'll be also using it during conversion to managed resources.

Reviewed-by: Alban Bedel <alban.bedel@avionic-design.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-29 09:29:17 -08:00
Alban Bedel
bf7f5316cb Input: tca8418_keypad - add support for shared interrupt
Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-29 09:29:05 -08:00
Alban Bedel
e89e29b858 Input: tca8418_keypad - add support for device tree bindings
Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-29 09:28:50 -08:00
Alexander Sverdlin
4447ca1280 of_i2c: Honour "status=disabled" property of device
Currently of_i2c_register_devices() function registers all i2c devices,
independently from their status property in device tree. According to
"ePAPR 1.1" spec, device should only be registered if there is no
"status" property, or it has "ok" (or "okay") value (see
of_device_is_available()). In case of "platform devices",
of_platform_device_create_pdata() checks for "status" and ensures
that disabled devices are not populated. But such check for i2c buses
was missing until now. Fix it.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@sysgo.com>
Acked-by: Rob Herring <robherring2@gmail.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Reviewed-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-11-29 17:28:08 +00:00
Grant Likely
499b42c3e4 powerpc: Fix fallout from device_node->name constification
Commit c22618a1, "drivers/of: Constify device_node->name and
->path_component_name" changes device_node name to a const value, but
the PowerPC scom code still assigns it to a non-void field in
debugfs_blob_wrapper. The /right/ solution might be to change the
debugfs_blob_wrapper->data to also be const, but that is a bit
risky. Instead, cast the value to (void*). It is a bit ugly, but it
is the safest change until it can be investigated where
debugfs_blob_wrapper can be modified.

Reported-by: Michael Neuling <mikey@neuling.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-11-29 17:27:19 +00:00
Steffen Trumtrar
b8fbdc42c5 of: add 'const' for of_parse_phandle parameter *np
The existing function does not change the passed device_node pointer. It is
only handed to of_get_property which itself takes a const struct device_node.

of_parse_phandle() can therefore take a const pointer as well.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
[grant.likely: drop extraneous whitespace change]
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-11-29 17:27:19 +00:00
Tomi Valkeinen
29aaf90c68 [media] omap_vout: remove extra include
Remove including plat/dma.h which is not needed.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-29 19:09:21 +02:00
Tomi Valkeinen
950e2fb420 [media] omap_vout: use omapdss's version instead of cpu_is_*
cpu_is_* class functions create a dependency to OMAP platform code.
omapdss driver, which omap_vout uses, exposes a function to get the
version of the DSS hardware.

To remove the dependency to OMAP platform code this patch changes
omap_vout to use the omapdss version. For most of the checks, the ones
dealing with DSS differences, this is actually more correct than using
cpu_is_* functions. For the check whether VRFB is available or not this
is not really correct, but still works fine.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-29 19:09:16 +02:00
Alexander Shiyan
f2bd5d2406 ARM64: Remove incorrect Kconfig symbol HAVE_SPARSE_IRQ
Kernel does not contain symbol HAVE_SPARSE_IRQ. Definition
in arch/arm64/Kconfig seems typo because valid symbol is
MAY_HAVE_SPARSE_IRQ.
In any case SPARSE_IRQ is selected by default and we just
remove selecting of this symbol.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2012-11-29 16:53:35 +00:00
Tekkaman Ninja
715a7119ea Documentation: Fixes a word in Documentation/arm64/memory.txt
Fixes a term in Documentation/arm64/memory.txt
The modification is based on Catalin Marinas <catalin.marinas@arm.com>'s
suggestion:
    "memory" in "ffffffc000000000 ffffffffffffffff 256GB memory"
    should  be treated as "kernel logical memory map".

Signed-off-by: Fu Wei <tekkamanninja@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2012-11-29 16:33:18 +00:00
Catalin Marinas
33eaa58f85 arm64: Make !dirty ptes read-only
The AArch64 Linux port relies on the mm code to wrprotect clean ptes.
This however is not the case with newly created ptes and
PAGE_SHARED(_EXEC) is writable but !dirty.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org>
2012-11-29 15:32:13 +00:00
Mark Brown
25c6fdb040 ASoC: arizona: Add parentheses
Some compiler versions complain.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-29 15:18:29 +00:00