Commit graph

361,345 commits

Author SHA1 Message Date
Johannes Berg
339afbf481 mac80211: support P2P GO powersave configuration
If the low-level driver wants to support P2P GO
powersave configuration, it must set the cfg80211
flags and mac80211 will pass the parameters to it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-27 11:56:19 +01:00
Johannes Berg
53cabad70e nl80211: support P2P GO powersave configuration
If a driver supports P2P GO powersave, allow it to
set the new feature flags for it and allow userspace
to configure the parameters for it. This can be done
at GO startup and later changed with SET_BSS.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-27 11:56:18 +01:00
Johannes Berg
5164892184 mac80211: support (partial) VHT radiotap information
Add some information that we have about VHT to radiotap.
This at least lets one see the MCS and NSS information.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-27 11:56:18 +01:00
Johannes Berg
f2d9d270c1 mac80211: support VHT association
Determine the VHT channel from the AP's VHT operation IE
(if present) and configure the hardware to that channel
if it is supported. If channel contexts cause a channel
to not be usable, try a smaller bandwidth.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-27 11:56:07 +01:00
Tomi Valkeinen
8f46efadf3 OMAPDSS: add dss_get_core_pdev()
Add dss_get_core_pdev() which returns the platform device for dss core
device. The following patches use the core pdev to register sysfs files
in the compat code.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-27 12:47:25 +02:00
Tomi Valkeinen
3f30b8c2b6 OMAPDSS: create display-sysfs.c
Move display sysfs related code from display.c to display-sysfs.c, for
clarity. The sysfs code will only be used for compat mode.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-27 12:47:25 +02:00
Tomi Valkeinen
74e164588e OMAPDSS: DISPC: pass pclk & lclk to dispc_ovl_calc_scaling
In order to make the scaling calculations independent of the current
hardware configuration (e.g. which manager is connected to this output),
we need to change the calc funcs to get all the variables needed for the
calculations via parameters.

This patch changes dispc_ovl_calc_scaling to get pclk and lclk as
parameters.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-27 12:47:25 +02:00
Tomi Valkeinen
0c6921de37 OMAPDSS: DISPC: pass pclk & lclk to calc_scaling
In order to make the scaling calculations independent of the current
hardware configuration (e.g. which manager is connected to this output),
we need to change the calc funcs to get all the variables needed for the
calculations via parameters.

This patch changes calc_scaling to get pclk and lclk as parameters.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-27 12:47:24 +02:00
Mark Brown
a5ccea2224 ASoC: wm2000: Get the CODEC pointer from the widget
Don't rely on the kcontrol for robustness reasons, the widget mechanism
is what the framework uses.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-27 10:46:13 +00:00
Mark Brown
38113360f0 ASoC: arizona: Support higher clock rates
Some devices support higher clock rates, allow users to select these.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-27 10:36:34 +00:00
Tomi Valkeinen
465ec13f60 OMAPDSS: DISPC: pass pclk & lclk to check_horiz_timing_omap3
In order to make the scaling calculations independent of the current
hardware configuration (e.g. which manager is connected to this output),
we need to change the calc funcs to get all the variables needed for the
calculations via parameters.

This patch changes check_horiz_timing_omap3() to get pclk and lclk as
parameters.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-27 12:27:02 +02:00
Tomi Valkeinen
8702ee5064 OMAPDSS: DISPC: pass pclk to calc_core_clk()
In order to make the scaling calculations independent of the current
hardware configuration (e.g. which manager is connected to this output),
we need to change the calc funcs to get all the variables needed for the
calculations via parameters.

This patch changes calc_core_clk() function to get pclk as a parameter.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-27 12:27:02 +02:00
Tomi Valkeinen
251886d8bc OMAPDSS: DISPC: pclk & lclk rates for writeback
Change the dispc_plane_pclk_rate and dispc_plane_lclk_rate functions to
return 0 if the given plane is the writeback plane. The clocks are not
valid for WB, but returning 0 from these functions instead of running
into BUG() will simplify the code that uses these functions.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-27 12:27:02 +02:00
Tomi Valkeinen
3c91ee8cc9 OMAPDSS: DISPC: use WARN_ON() in dispc_mgr_go
dispc_mgr_go() should never be called with manager output disabled or if
the GO bit is already set. Change the current silent returns to
WARN_ONs.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-27 12:27:02 +02:00
Tomi Valkeinen
916188a466 OMAPDSS: cleanup WB enable/is_enabled functions
Instead of doing direct register reads/writes, dispc_wb_enable() and
dispc_wb_is_enabled() functions can use the common overlay functions to
set and check the enable bit.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-27 12:27:02 +02:00
Tomi Valkeinen
b08e3e1342 OMAPDSS: DISPC: Remove blocking code from dispc_wb_enable()
WB will not be used with compat-mode, i.e. from omapfb. This means we
don't need the current complex dispc_wb_enable function, but can have a
simple register write version of the function.

This patch removes all the extra code from dispc_wb_enable()

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-27 12:27:02 +02:00
Tomi Valkeinen
15f5e7324a OMAPDSS: DISPC: use get_framedone_irq in disable_digit_out
dispc_mgr_disable_digit_out() needs to wait until the DIGIT output is
turned off. This is done with either VSYNC irq on OMAP2/3 and
FRAMEDONETV on OMAP4+. It currently uses a rather hacky way to decide
what irq to use.

This patch changes dispc_mgr_disable_digit_out to use
dispc_mgr_get_framedone_irq to find out if there's framedone irq on this
SoC, and if not, uses VSYNC.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-27 12:27:02 +02:00
Tomi Valkeinen
cffa947d27 OMAPDSS: DISPC: add no_framedone_tv feat
OMAP2/3 do not have FRAMEDONETV irq, but later omaps do. We currently
always return 0 from dispc_mgr_get_framedone_irq() for TV output to be
compatible with OMAP2/3.

This patch implements "no_framedone_tv" dispc-feature that is used in
dispc_mgr_get_framedone_irq to return either 0 for OMAP2/3, or the
correct IRQ number for FRAMEDONETV on OMAP4+.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-27 12:27:01 +02:00
Tomi Valkeinen
e870f21232 OMAPDSS: don't WARN if there's no DSI device
dsi_get_dsidev_from_id() gives a WARN if DSI support is not compiled in.
This warning is not right, as it's valid to call
dsi_get_dsidev_from_id() to see if there is DSI support or not.

Remove the WARN().

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-27 12:27:01 +02:00
Tomi Valkeinen
1de8e129f5 OMAPDSS: DPI: fix crash with dpi_verify_dsi_pll()
If the DSI support has not been compiled in or the SoC doesn't have DSI
hardware, dpi_get_dsidev() returns NULL. This NULL is passed to
dpi_verify_dsi_pll() causing a crash. The bug was added with commit
0e8276ef75 (OMAPDSS: DPI: always use DSI
PLL if available).

Fix this by checking if dsidev is NULL before calling
dpi_verify_dsi_pll().

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-27 12:27:01 +02:00
Tomi Valkeinen
7e12be71fb OMAPDSS: remove declarations for non-existing functions
Remove dispc_mgr_is_channel_enabled() and dss_mgr_get_timings()
declarations, as the function doesn't exist.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-27 12:27:01 +02:00
Tomi Valkeinen
0074120228 Merge branch 'fbdev-next' of github.com:timur-tabi/linux-2.6 into for-linus
* 'fbdev-next' of github.com:timur-tabi/linux-2.6:
  drivers/video: fsl-diu-fb: store EDID data in the global object
  drivers/video: fsl-diu-fb: don't touch registers for unused features
  drivers/video: fsl-diu-fb: clean up reset of primary display
  drivers/video: fsl-diu-fb: remove unused 'cursor_reset' variable
  drivers/video: fsl-diu-fb: improve message displays
  drivers/video: fsl-diu-fb: streamline enabling of interrupts
  drivers/video: fsl-diu-fb: add support for set_gamma ioctls
  drivers/video: fsl-diu-fb: simplify platforms that have only one port
  MAINTAINERS: Make Timur Tabi the maintainer for the Freescale DIU driver
2012-11-27 12:16:37 +02:00
Manjunathappa
81cec3c756 video: da8xx-fb: clk_get on connection id fck
do clk_get on connection id "fck" to support OMAP based
platforms having multiple clocks for module. Without this
driver change clk_get fails on am335x.

This patch is based on the discussion in community
http://marc.info/?l=linux-kernel&m=135166018907827&w=2

Signed-off-by: Manjunathappa <prakash.pm@ti.com>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-27 11:52:40 +02:00
Manjunathappa, Prakash
3b43ad201d da8xx-fb: cleanup LCDC configurations
Configure below LCDC configurations to optimal values, also have an
option configure these optional parameters for platform.
1) AC bias configuration: Required only for passive panels
2) Dma_burst_size:
3) FIFO_DMA_DELAY:
4) FIFO threshold: Does not apply for da830 LCDC.

Patch is verified for 16bpp and 24bpp configurations on da830, da850 and
am335x EVMs.

Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-27 11:47:53 +02:00
Manjunathappa, Prakash
f772fabdf7 da8xx-fb: adopt fb_videomode data for panel information
Adopt fb_videomode data instead of defining driver private
structure to hold panel information. This is the way standard FB
drivers maintain the panel information.

Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-27 11:47:53 +02:00
Tomi Valkeinen
38ab331aa2 Merge branch 'lcdc-next' of git://linuxtv.org/pinchartl/fbdev into for-linus
Merge SH Mobile LCDC patches from Laurent.

* 'lcdc-next' of git://linuxtv.org/pinchartl/fbdev:
  fbdev: sh_mobile_lcdc: Make sh_mobile_lcdc_sys_bus_ops static
  sh: kfr2r09: Use the backlight API for brightness control
  ARM: mach-shmobile: ag5evm: Use the backlight API for brightness control
  fbdev: sh_mobile_lcdc: Remove unused get_brightness pdata callback
  sh: ecovec24: Remove unused get_brightness LCDC callback
  sh: ap325rxa: Remove unused get_brightness LCDC callback
  ARM: mach-shmobile: mackerel: Removed unused get_brightness callback
  fbdev: sh_mobile_lcdc: Store the backlight brightness internally
  fbdev: sh_mipi_dsi: Remove the unused sh_mipi_dsi_info lcd_chan field
  ARM: mach-shmobile: Remove the unused sh_mipi_dsi_info lcd_chan field
  fbdev: sh_mipi_dsi: Remove last reference to LCDC platform data
  fbdev: sh_mipi_dsi: Use the LCDC entity default mode
  fbdev: sh_mipi_dsi: Use the sh_mipi_dsi_info channel field
  ARM: mach-shmobile: Initiliaze the new sh_mipi_dsi_info channel field
  fbdev: sh_mipi_dsi: Add channel field to platform data
  ARM: mach-shmobile: ag5evm: Add LCDC tx_dev field to platform data
  fbdev: sh_mobile_lcdc: Remove priv argument from channel and overlay init
  fbdev: sh_mobile_lcdc: Rename mode argument to modes
  fbdev: sh_mobile_lcdc: Get display dimensions from the channel structure
  fbdev: sh_mobile_lcdc: use dma_mmap_coherent
2012-11-27 11:45:43 +02:00
Marc Kleine-Budde
fc8f40b10e can: mpc5xxx_can: add MODULE_DEVICE_TABLE
This patch adds a MODULE_DEVICE_TABLE for the of bindings, so that the module
can be loaded automatically by udev.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-11-27 09:49:36 +01:00
Marc Kleine-Budde
69c0c5b15a can: c_can_platform: add MODULE_DEVICE_TABLE
This patch adds a MODULE_DEVICE_TABLE for the of and platform bindings, so that
the module can be loaded automatically by udev.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-11-27 09:49:34 +01:00
Marc Kleine-Budde
09ca71cae2 can: at91_can: add MODULE_DEVICE_TABLE
This patch adds a MODULE_DEVICE_TABLE for the platform bindings, so that the
module can be loaded automatically by udev.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-11-27 09:49:34 +01:00
Marc Kleine-Budde
4358a9dc94 can: flexcan: add MODULE_DEVICE_TABLE
This patch adds a MODULE_DEVICE_TABLE for the of and platform bindings, so that
the module can be loaded automatically by udev.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-11-27 09:49:33 +01:00
Marc Kleine-Budde
f190a50c49 can: cc770_platform: add MODULE_ALIAS and MODULE_DEVICE_TABLE
This patch adds a MODULE_ALIAS for the platform bindings and a
MODULE_DEVICE_TABLE for of bindings, so that the module can be loaded
automatically by udev.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-11-27 09:49:33 +01:00
Marc Kleine-Budde
d8c4386d16 can: sja1000_platform: add MODULE_ALIAS
This patch adds a MODULE_ALIAS for the platform bindings, so that the module
can be loaded automatically by udev.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-11-27 09:49:33 +01:00
Marc Kleine-Budde
64116c148c can: ti_hecc: add MODULE_ALIAS
This patch adds a MODULE_ALIAS for the platform bindings, so that
the module can be loaded automatically udev.

Tested-by: Jan Lübbe <jlu@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-11-27 09:49:32 +01:00
Marc Kleine-Budde
73ae9499db can: bfin_can: add MODULE_ALIAS
This patch adds a MODULE_ALIAS for the platform bindings, so that the module
can be loaded automatically by udev.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-11-27 09:49:32 +01:00
Andreas Larsson
04df251073 can: sja1000: Make sja1000_of_platform selectable and compilable on SPARC
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-11-27 09:49:32 +01:00
Olivier Sobrie
080f40a6fa can: kvaser_usb: Add support for Kvaser CAN/USB devices
This driver provides support for several Kvaser CAN/USB devices.
Such kind of devices supports up to three CAN network interfaces.

It has been tested with a Kvaser USB Leaf Light (one network interface)
connected to a pch_can interface.
The firmware version of the Kvaser device was 2.5.205.

List of Kvaser devices supported by the driver:
  - Kvaser Leaf Light
  - Kvaser Leaf Professional HS
  - Kvaser Leaf SemiPro HS
  - Kvaser Leaf Professional LS
  - Kvaser Leaf Professional SWC
  - Kvaser Leaf Professional LIN
  - Kvaser Leaf SemiPro LS
  - Kvaser Leaf SemiPro SWC
  - Kvaser Memorator II HS/HS
  - Kvaser USBcan Professional HS/HS
  - Kvaser Leaf Light GI
  - Kvaser Leaf Professional HS (OBD-II connector)
  - Kvaser Memorator Professional HS/LS
  - Kvaser Leaf Light "China"
  - Kvaser BlackBird SemiPro
  - Kvaser USBcan R

Signed-off-by: Daniel Berglund <db@kvaser.com>
Signed-off-by: Olivier Sobrie <olivier@sobrie.be>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-11-27 09:49:31 +01:00
AnilKumar Ch
52cde85acc can: c_can: Add d_can raminit support
Add D_CAN raminit support to C_CAN driver to enable D_CAN RAM,
which holds all the message objects during transmission or
receiving of data. This initialization/de-initialization should
be done in synchronous with D_CAN clock.

In case of AM335X-EVM (current user of D_CAN driver) message RAM is
controlled through control module register for both instances. So
control module register details is required to initialization or
de-initialization of message RAM according to instance number.

Control module memory resource is obtained from D_CAN dt node and
instance number obtained from device tree aliases node.

This patch was tested on AM335x-EVM along with pinctrl data addition
patch, d_can dt aliases addition and control module data addition.
pinctrl data addition is not added to am335x-evm.dts (only supports
CPLD profile#0) because d_can1 is supported under CPLD profile#1.

Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
[mkl: fix instance for non DT in probe, cleaned up raminit]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-11-27 09:49:31 +01:00
Eliad Peller
978cd3a0b8 wlcore: save session_id per-link
A new session_id is generated on link allocation.
it is saved in a global array and used later, on tx.

The new fw api adds new bcast/global_session_id
fields to start_role(ap) command, and a new session_id
field to add_peer command. align the driver with it.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-27 10:49:30 +02:00
Eliad Peller
d50529c0d8 wlcore: pass wmm configuration to the fw
New fields were added to start_role(ap) and
set_peer_state commands, so the fw will be
able to know whether the sta/ap supports
wmm (the fw uses it in order to choose the
AC for some of its internally-generated frames)

For sta, take this value right from bss_conf->qos.

For ap, check for wmm support by looking for the
WMM IE in the configured beacon.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-27 10:49:29 +02:00
Eliad Peller
c50a282515 wlcore: update events enum/struct to new fw api
The event mailbox in wl18xx has a different
(non-compatible) structure.

Create common functions in wlcore to handle the
events, and call them from the chip-specific
event mailbox parsers.

This way, each driver (wl12xx/wl18xx) extracts
the event mailbox by itself according to its
own structure, and then calls the common
wlcore functions to handle it.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-27 10:49:29 +02:00
Eliad Peller
fcab189027 wlcore: update channel_switch/stop_channel_switch commands
Some fields were added to the channel_switch and
stop_channel_switch commands. Unfortunately,
the new 18xx channel_switch struct is not backward
compatible with the 12xx channel switch struct.

Add a new channel_switch op to wlcore, and update
the driver accordingly.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-27 10:49:28 +02:00
Eliad Peller
b6acb4e00e wlcore: update acx enum
update the acx enum to the new fw api.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-27 10:49:28 +02:00
Eliad Peller
0a1c720c63 wl18xx: increase MAX_CHANNELS_5GHZ
Some regdomains have more than 23 valid 5ghz channels,
so 18xx's MAX_CHANNELS_5GHZ was increased to 32.

Since now we have different max 5ghz channels values
for wl12xx and wl18xx, add a new wl->max_channels_5ghz
field, and use it for scan channels configuration.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-27 10:49:27 +02:00
Eliad Peller
78e28062fe wlcore: split 18xx and 12xx scan mechanism
The scan APIs of 12xx and 18xx are totally different.
Use some common functions as much as possible (e.g.
for setting scan channels), but split scan.c into
chip-specific scan.c files, each implementing its
own scan mechanism.

(in other words - move most of the current wlcore's
scan.c into wl12xx, and implement a similar mechanism
in 18xx, according to the new api)

New wlcore ops are introduced in order to call the
chip-specific scan functions.

The template indices used for each scan (regular/scheduled)
are also different between the chips, so set the correct
indices used for each scan type after identifying the chip.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-27 10:49:27 +02:00
Eliad Peller
e9b9d45507 wlcore: update commands enum to new fw api
Align the commands enum with the new fw api (8.4.0.0.19)

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-27 10:49:26 +02:00
Eliad Peller
750a986d6a wl18xx: change fw name and temporarily fail loading
The new fw (8.5.0.0.28) is not backward compatible
with older drivers.

Use a new fw name (along with bumping the min
fw version), and add some code to fail
any boot attempt during the fw api alignment
patches (as the driver is not functional in
these transitional patches).

This code will be removed after the api alignment
will be done.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-27 10:49:26 +02:00
Eliad Peller
512c5385e6 wlcore: make scan scan configuration functions more generic
18xx and 12xx have different scan APIs. In 18xx,
the scan and the sched scan use the same struct.

Prepare the scan configuration functions to it, by taking
more generic params (e.g. ieee80211_channel) instead of
specific structs/requests.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-27 10:49:25 +02:00
Eliad Peller
598b262a06 wlcore: don't call ieee80211_sched_scan_stopped directly
When we stop sched scan during connection, we shouldn't
call ieee80211_sched_scan_stopped directly, but do it
in the normal flow, as part of the SCHED_SCAN_COMPLETED
event handling.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-27 10:49:25 +02:00
Luciano Coelho
48af2eb046 wlcore: remove a bunch of unnecessary parentheses
Some if statements had unnecessary parentheses.  Remove them for
consistency.

Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-27 10:49:24 +02:00
Luciano Coelho
ef08d0281a wlcore: avoid using goto in normal code flow
Remove goto and label in the code where a simple if can be used.  If
nothing else, this is at least confusing git diff, which shows the
label name as the name of the function.

Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-27 10:49:23 +02:00