Commit graph

361,345 commits

Author SHA1 Message Date
Inki Dae
a39b49812f drm/exynos: remove unnecessary code.
plane->fb will be set to new fb after update_plane callback is called
by drm_mode_set_plane()

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-22 17:55:17 +09:00
Inki Dae
129495dee5 drm/exynos: fix linux framebuffer address setting.
With iommu, buffer->dma_addr has device addres so this patch
fixes for physical address to be set to fix.smem_start always.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-22 17:55:17 +09:00
Alan Cox
c9795bd708 RDMA/amsol1100: Fix missing break
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-11-22 00:52:55 -08:00
Alan Cox
5390f86796 IB/ipath: Remove unreachable code
Signed-off-by: Alan Cox <alan@linux.intel.com>
Acked-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-11-22 00:50:51 -08:00
Julia Lawall
079abea6a3 RDMA/nes: Use WARN()
Use WARN() rather than printk() followed by WARN_ON(1), for conciseness.

A simplified version of the semantic patch that makes this transformation
is as follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression list es;
@@

-printk(
+WARN(1,
  es);
-WARN_ON(1);
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

[ Remove extra KERN_ERR from WARN() format.  - Roland ]

Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-11-22 00:49:15 -08:00
Tatyana Nikolova
cecdcd5f24 RDMA/nes: Fix for incorrect multicast address in the perfect filter table
Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-11-22 00:49:14 -08:00
Tatyana Nikolova
fc8d7547b1 RDMA/nes: Fix for sending fpdus in order to hardware
Locking fix to prevent race conditions. Fpdus (per qp) need to be
forwarded to hardware in the order of their sequence numbers.

Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Donald Wood <Donald.E.Wood@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-11-22 00:49:14 -08:00
Tatyana Nikolova
bff3976bef RDMA/nes: Fix for unlinking skbs from empty list
Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-11-22 00:49:13 -08:00
Tatyana Nikolova
3127e4ea54 RDMA/nes: Fix incorrect address of IP header
Fix for incorrect ip header address when forwarding fpdus to hardware.

Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-11-22 00:49:13 -08:00
David Howells
7235aa79f6 UAPI: (Scripted) Disintegrate include/rdma
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-11-22 00:43:10 -08:00
Mark Brown
cd22000ade ASoC: wm8994: Lower AIFnCLK divisor when dropping to 32kHz
When lowering SYSCLK to 50kHz for accessory detection also lower the
AIFnCLK divisor to normalise the clocking configuration within the
device. This will not disrupt audio as we cannot support active audio
with such a low SYSCLK.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-22 17:36:30 +09:00
Sascha Hauer
33b3858732 ARM i.MX6: Add pwm support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-22 09:16:43 +01:00
Sascha Hauer
82a618da1b ARM i.MX51: Add pwm support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-22 09:16:25 +01:00
Sascha Hauer
9ae90afaeb ARM i.MX53: Add pwm support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-22 09:15:48 +01:00
Fabio Estevam
f40f38d1dc ARM: mx5: Replace clk_register_clkdev with clock DT lookup
Similarly as it was done for mx6q, use a DT lookup in order to make maintainance
task for the clock devices easier.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-22 09:15:26 +01:00
Josh Radel
ab0b00bc6e mtd: ofpart: Replicate mtd cmdline "lk" option with device tree "lock" property
The mtd partition command line parser already supports a "lk" option to mask
MTD_POWERUP_LOCK. This extends that same functionality to device tree
partition specifications.

Signed-off-by: Josh Radel <jradel@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-22 10:14:22 +02:00
Eduardo Valentin
4ba115b1e1 thermal: cpu cooling: allow module builds
As thermal drivers can be built as modules and also
the thermal framework itself, building cpu cooling
only as built-in can cause linking errors. For instance:
* Generic Thermal sysfs driver
*
Generic Thermal sysfs driver (THERMAL) [M/n/y/?] m
  generic cpu cooling support (CPU_THERMAL) [N/y/?] (NEW) y

with the following drive:
CONFIG_OMAP_BANDGAP=m

generates:
ERROR: "cpufreq_cooling_unregister" [drivers/staging/omap-thermal/omap-thermal.ko] undefined!
ERROR: "cpufreq_cooling_register" [drivers/staging/omap-thermal/omap-thermal.ko] undefined!

This patch changes cpu cooling driver to allow it
to be built as module.

Reported-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Reviewed-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2012-11-22 15:59:52 +08:00
Eduardo Valentin
3778ff5c70 thermal: cpu cooling: use const parameter while registering
There are predefined cpu_masks that are const data structures.
This patch changes the cpu cooling register function so that
those const cpu_masks can be used, without compilation warnings.

include/linux/cpumask.h

 * The following particular system cpumasks and operations manage
 * possible, present, active and online cpus.
 *
 *     cpu_possible_mask- has bit 'cpu' set iff cpu is populatable
 *     cpu_present_mask - has bit 'cpu' set iff cpu is populated
 *     cpu_online_mask  - has bit 'cpu' set iff cpu available to scheduler
 *     cpu_active_mask  - has bit 'cpu' set iff cpu available to migration
 *

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2012-11-22 15:59:47 +08:00
Stephen Warren
9b7ef60ce1 mtd: m25p80: add support for the Winbond w25q80bl chip
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-22 09:45:00 +02:00
Rafał Miłecki
00940a2347 mtd: bcm47xxnflash: enable BCM4706 driver
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-22 09:32:49 +02:00
Rafał Miłecki
3c01d4cb75 mtd: bcm47xxnflash: implement reading
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-22 09:32:45 +02:00
Rafał Miłecki
0fbc599155 mtd: bcm47xxnflash: support for NAND_CMD_READID command
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-22 09:32:41 +02:00
Rafał Miłecki
19c0921c84 mtd: bcm47xxnflash: init NAND on BCM4706
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-22 09:32:38 +02:00
Rafał Miłecki
a5401370c5 mtd: prepare place for BCMA NAND flash driver(s)
BCMA bus can contain NAND flash memory, it's registered in system as
platform device. This adds required hooks and place for controler
specific drivers.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-22 09:32:34 +02:00
Rafał Miłecki
8d4b9e3182 bcma: export PLL reading function
This is required by NAND flash driver for initializing wait counters.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-22 09:32:28 +02:00
Nobuhiro Iwamatsu
f17073a3ae ARM: kirkwood: Add Plat'Home OpenBlocks A6 support
Add support for Plat'Home OpenBlocks A6 using the device tree
where possible.
This commit supports SATA, USB, ether and serial console.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-22 07:01:51 +00:00
Thomas Abraham
b1ce101bb9 ARM: dts: Add pin controller node for Samsung EXYNOS5440 SoC
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-22 13:50:14 +09:00
MyungJoo Ham
df072eb97d extcon: kernel_doc style fix
Corrected kernel_doc entries.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2012-11-22 13:43:27 +09:00
Thomas Abraham
f0b9a7e521 pinctrl: exynos5440: add pinctrl driver for Samsung EXYNOS5440 SoC
Add a new pinctrl driver for Samsung EXYNOS5440 SoC. The pin controller
module in EXYNOS5440 is different from the pin controller found on other
Samsung SoC. Hence, the pin controller driver for EXYNOS5440 SoC is
independent of the Samsung pinctrl framework.

Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-22 13:42:58 +09:00
Kukjin Kim
1355bbc480 ARM: dts: add initial dts file for EXYNOS5440, SSDK5440
This patch adds initial dts file for EXYNOS5440 SoC and adds the
dts file for SSDK5440 board which is a kind of reference board.
More properties will be added later.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-22 13:42:49 +09:00
NeilBrown
884162df2a md/raid10: decrement correct pending counter when writing to replacement.
When a write to a replacement device completes, we carefully
and correctly found the rdev that the write actually went to
and the blithely called rdev_dec_pending on the primary rdev,
even if this write was to the replacement.

This means that any writes to an array while a replacement
was ongoing would cause the nr_pending count for the primary
device to go negative, so it could never be removed.

This bug has been present since replacement was introduced in
3.3, so it is suitable for any -stable kernel since then.

Reported-by: "George Spelvin" <linux@horizon.com>
Cc: stable@vger.kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
2012-11-22 15:12:42 +11:00
NeilBrown
e7c0c3fa29 md/raid10: close race that lose writes lost when replacement completes.
When a replacement operation completes there is a small window
when the original device is marked 'faulty' and the replacement
still looks like a replacement.  The faulty should be removed and
the replacement moved in place very quickly, bit it isn't instant.

So the code write out to the array must handle the possibility that
the only working device for some slot in the replacement - but it
doesn't.  If the primary device is faulty it just gives up.  This
can lead to corruption.

So make the code more robust: if either  the primary or the
replacement is present and working, write to them.  Only when
neither are present do we give up.

This bug has been present since replacement was introduced in
3.3, so it is suitable for any -stable kernel since then.

Reported-by: "George Spelvin" <linux@horizon.com>
Cc: stable@vger.kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
2012-11-22 15:12:36 +11:00
Kukjin Kim
2edb36c4ea ARM: EXYNOS: add support for EXYNOS5440 SoC
This patch adds support for EXYNOS5440 SoC which is including
ARM Cortex-A15 Quad cores.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-22 13:09:18 +09:00
Jim Rees
d751f748b3 NFS: Reduce stack use in encode_exchange_id()
encode_exchange_id() uses more stack space than necessary, giving a compile
time warning. Reduce the size of the static buffer for implementation name.

Signed-off-by: Jim Rees <rees@umich.edu>
Reviewed-by: "Adamson, Dros" <Weston.Adamson@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-21 22:59:29 -05:00
Trond Myklebust
fe20d7d5ee NFSv4: Fix a compile time warning when #undef CONFIG_NFS_V4_1
The function nfs4_get_machine_cred_locked is used by NFSv4.0 routines
too.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-21 22:59:28 -05:00
Arnd Bergmann
0d2c9f0517 IXP4xx: use __iomem for MMIO
The ixp4xx queue manager uses "const struct qmgr_regs __iomem *" as the
type for a pointer that is passed to __raw_writel, which is not
allowed because of the const-ness.

Dropping the 'const' keyword fixes the problem. While we're here,
let's also drop the useless type cast.

Without this patch, building ixp4xx_defconfig results in:

In file included from arch/arm/mach-ixp4xx/ixp4xx_qmgr.c:15:0:
arch/arm/mach-ixp4xx/include/mach/qmgr.h: In function 'qmgr_put_entry':
arch/arm/mach-ixp4xx/include/mach/qmgr.h:96:2: warning: passing argument 2 of '__raw_writel' discards 'const' qualifier from pointer target type [enabled by default]
arch/arm/include/asm/io.h:88:91: note: expected 'volatile void *' but argument is of type 'const u32 *'
In file included from drivers/net/ethernet/xscale/ixp4xx_eth.c:41:0:
arch/arm/mach-ixp4xx/include/mach/qmgr.h: In function 'qmgr_put_entry':
arch/arm/mach-ixp4xx/include/mach/qmgr.h:96:2: warning: passing argument 2 of '__raw_writel' discards 'const' qualifier from pointer target type [enabled by default]
arch/arm/include/asm/io.h:88:91: note: expected 'volatile void *' but argument is of type 'const u32 *'
arch/arm/mach-ixp4xx/ixp4xx_qmgr.c: In function 'qmgr_set_irq':
arch/arm/mach-ixp4xx/ixp4xx_qmgr.c:41:9: warning: passing argument 2 of '__raw_writel' discards 'const' qualifier from pointer target type [enabled by default]
arch/arm/include/asm/io.h:88:91: note: expected 'volatile void *' but argument is of type 'const u32 *'

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2012-11-22 03:36:45 +00:00
Krzysztof Hałasa
b7b23db72f IXP4xx: map CPU config registers within VMALLOC region.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2012-11-22 03:36:38 +00:00
Krzysztof Hałasa
f0cdb15329 IXP4xx: Always ioremap() Queue Manager MMIO region at boot.
It doesn't make much sense to map QMgr dynamically - we almost always need it
and the static mapping will be needed for little-endian data-coherent operation
(to make QMgr region value-coherent).

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2012-11-22 03:36:30 +00:00
Tim Gardner
05cd3db0df ixp4xx: Declare MODULE_FIRMWARE usage
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2012-11-22 03:36:22 +00:00
Krzysztof Hałasa
9792eb1d72 IXP4xx crypto: MOD_AES{128,192,256} already include key size.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2012-11-22 03:36:15 +00:00
Krzysztof Hałasa
4d18dea510 WAN: Remove redundant HDLC info printed by IXP4xx HSS driver.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2012-11-22 03:36:07 +00:00
Krzysztof Hałasa
f203bc64e8 IXP4xx: Remove time limit for PCI TRDY to enable use of slow devices.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2012-11-22 03:35:58 +00:00
Krzysztof Hałasa
9665c52b10 IXP4xx: ixp4xx_crypto driver requires Queue Manager and NPE drivers.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2012-11-22 03:35:48 +00:00
Krzysztof Hałasa
553da857b1 IXP4xx: HW pseudo-random generator is available on IXP45x/46x only.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2012-11-22 03:35:39 +00:00
Krzysztof Hałasa
87ba5c6a31 IXP4xx: Fix off-by-one bug in Goramo MultiLink platform.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2012-11-22 03:35:30 +00:00
Krzysztof Hałasa
3043c5c8bf IXP4xx: Fix Goramo MultiLink platform compilation.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2012-11-22 03:35:19 +00:00
Jason Cooper
4e76b1b232 Marvell SATA and I2C enabling for OpenBlocks AX3-4
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iEYEABECAAYFAlCtU90ACgkQ9lPLMJjT96dSdQCfcmuU/3oXziktW6coEOwWD0rZ
 rpAAoITtWPO7RNRqhCVQGFJKuuy5sid7
 =ME0a
 -----END PGP SIGNATURE-----

Merge tag 'marvell-openblocks-i2c-sata-for-3.8' of git://github.com/MISL-EBU-System-SW/mainline-public into mvebu/everything

Marvell SATA and I2C enabling for OpenBlocks AX3-4
2012-11-22 03:28:05 +00:00
Dave Airlie
452f19201f Merge branch 'drm-fixes-3.7' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Alex writes:
A couple more small fixes for 3.7:
- another evergreen_mc fix
- add an AGP quirk for an old RV250
- new pci id.

* 'drm-fixes-3.7' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: add new SI pci id
  radeon: add AGPMode 1 quirk for RV250
  drm/radeon: properly track the crtc not_enabled case evergreen_mc_stop()
2012-11-22 13:21:57 +10:00
Dave Airlie
da6004b8d0 Merge branch 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes
nouveau: one more regression fix.

* 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
  drm/nouveau: use the correct fence implementation for nv50
2012-11-22 13:21:01 +10:00
Dave Airlie
776d1e38c5 Merge branch 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes
Some more misc fallout from nouveau rework.

* 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
  drm/nouveau/bios: fix DCB v1.5 parsing
  drm/nouveau: add missing pll_calc calls
  drm/nouveau: fix crash with noaccel=1
  drm/nv40: allocate ctxprog with kmalloc
  drm/nvc0/disp: fix thinko in vblank regression fix..
2012-11-22 13:20:01 +10:00