Commit graph

361,345 commits

Author SHA1 Message Date
Bill Pemberton
46620803c3 staging: nvec: remove use of __devinit
CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 14:23:51 -08:00
Bill Pemberton
44b90a3fbc staging: nvec: remove use of __devexit_p
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 14:23:51 -08:00
Johan Meiring
477953e13a staging: cxt1e1: sbecrc.c: fixes coding style issue
This commit sorts out a coding style issue related to spaces between
parentheses and function names.

Signed-off-by: Johan Meiring <johanmeiring@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 14:21:48 -08:00
Johan Meiring
3effcd06fb staging: cxt1e1: sbecrc.c: fixes brace placement
This commit sorts out the incorrect placement of braces in the file.

Signed-off-by: Johan Meiring <johanmeiring@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 14:21:48 -08:00
Johan Meiring
0b7ccbeda0 staging: cxt1e1: sbecrc.c: fixes indentation issues
This commit converts several instances of space-based indentation
to use tabs instead.

Signed-off-by: Johan Meiring <johanmeiring@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 14:21:48 -08:00
Johan Meiring
77c84b2995 staging: cxt1e1: musycc.c: fixes placement of parentheses
This commit fixes several incorrect placements of parantheses, as
identified by the checkpatch.pl tool.

Signed-off-by: Johan Meiring <johanmeiring@gmail.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 14:21:47 -08:00
Johan Meiring
fead55a03c staging: cxt1e1: musycc.c: fixes brace placement
This commit fixes incorrect brace placement as reported by the
checkpatch.pl tool.

Signed-off-by: Johan Meiring <johanmeiring@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 14:20:39 -08:00
Johan Meiring
ea9d1e960c staging: cxt1e1: musycc.c: uses tabs for indentation
This commit converts several instances of space usage for
indentation to tabs.

Signed-off-by: Johan Meiring <johanmeiring@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 14:20:39 -08:00
Johan Meiring
1bcf4b2a22 staging: cxt1e1: musycc.h: fixes brace placement
This commit fixes incorrect brace placement.

Signed-off-by: Johan Meiring <johanmeiring@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 14:20:39 -08:00
Johan Meiring
185b34d2b1 staging: cxt1e1: musycc.h: fixes coding style issues
This commit fixes instances of spaces being used for indentation
instead of tabs.

Signed-off-by: Johan Meiring <johanmeiring@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 14:20:38 -08:00
Thomas Petazzoni
9bfd143ed2 ARM: mvebu: update defconfig with I2C and RTC support
Now that we have support for the I2C busses on Armada 370/XP, and
support for the RTC on the OpenBlocks AX3-4 platform, include the
necessary options in mvebu_defconfig.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-21 23:20:36 +01:00
Thomas Petazzoni
6435389dde ARM: mvebu: Add SATA support for OpenBlocks AX3-4
This patch enables SATA support on the OpenBlocks AX3-4. It has one
internal SATA port, and an external eSATA port.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-21 23:20:35 +01:00
Toshi Kani
cd73018f62 ACPI: Update Dock hotplug error messages
Updated Dock hotplug error messages with acpi_handle_<level>()
and pr_<level>().  Replaced acpi_get_name() & kfree() with
apci_handle_<level>().  Added error status to the messages where
needed.

Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-21 23:20:23 +01:00
Toshi Kani
3d78bd9ef7 ACPI: Update Container hotplug error messages
Updated Container hotplug error messages with acpi_handle_<level>()
and pr_<level>().  Removed an unnecessary check to the device arg
in acpi_container_add().

Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-21 23:20:23 +01:00
Toshi Kani
ab6c57099d ACPI: Update Memory hotplug error messages
Updated Memory hotplug error messages with acpi_handle_<level>(),
dev_<level>() and pr_<level>().  Added missing "\n".

Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-21 23:20:22 +01:00
Toshi Kani
47db4547ff ACPI: Update CPU hotplug error messages
Updated CPU hotplug error messages with acpi_handle_<level>(),
dev_<level>() and pr_<level>().  Modified some messages for
clarity.  Added error status / id info to the messages where
needed.

Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Tested-by: Vijay Mohan Pandarathil <vijaymohan.pandarathil@hp.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-21 23:20:22 +01:00
Toshi Kani
fbfddae696 ACPI: Add acpi_handle_<level>() interfaces
This patch introduces acpi_handle_<level>(), where <level> is
a kernel message level such as err/warn/info, to support improved
logging messages for ACPI, esp. hot-plug operations.
acpi_handle_<level>() appends "ACPI" prefix and ACPI object path
to the messages.  This improves diagnosis of hotplug operations
since an error message in a log file identifies an object that
caused an issue.  This interface acquires the global namespace
mutex to obtain an object path.  In interrupt context, it shows
the object path as <n/a>.

acpi_handle_<level>() takes acpi_handle as an argument, which is
passed to ACPI hotplug notify handlers from the ACPICA.  Therefore,
it is always available unlike other kernel objects, such as device.

For example:
  acpi_handle_err(handle, "Device don't exist, dropping EJECT\n");
logs an error message like this at KERN_ERR.
  ACPI: \_SB_.SCK4.CPU4: Device don't exist, dropping EJECT

ACPI hot-plug drivers can use acpi_handle_<level>() when they need
to identify a target ACPI object path in their messages, such as
error cases.  The usage model is similar to dev_<level>().
acpi_handle_<level>() can be used when a device is not created or
is invalid during hot-plug operations.  ACPI object path is also
consistent on the platform, unlike device name that gets incremented
over hotplug operations.

ACPI drivers should use dev_<level>() when a device object is valid.
Device name provides more user friendly information, and avoids
acquiring the global ACPI namespace mutex.  ACPI drivers also
continue to use pr_<level>() when they do not need to specify device
information, such as boot-up messages.

Note: ACPI_[WARNING|INFO|ERROR]() are intended for the ACPICA and
are not associated with the kernel message level.

Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Tested-by: Vijay Mohan Pandarathil <vijaymohan.pandarathil@hp.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-21 23:20:22 +01:00
Nobuhiro Iwamatsu
14bedd4afb ARM: mvebu: Add support for the RTC in OpenBlocks AX3-4
The OpenBlocks AX3-4 has a Seiko Instruments S-35390A as the RTC
controller.  This patch enables this RTC device in the OpenBlocks
AX3-4 Device Tree.

[Thomas Petazzoni: updated with other OpenBlocks changes, rephrased
commit log.]
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-21 23:19:39 +01:00
Nobuhiro Iwamatsu
9eab21cffc ARM: mvebu: Add support for I2C on OpenBlocks AX3-4
The OpenBlocks AX3-4 board, based on the Armada XP SoC, has an I2C
bus. This patch enables this bus and sets the clock frequency of the
bus.

[Thomas Petazzoni: updated with other changes on OpenBlocks, rephrased
commit log.]
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-21 23:18:43 +01:00
Johan Meiring
dec80537cc staging: cxt1e1: musycc.h: fixes indentation issues
This commit fixes indentation issues that were reported by the
checkpatch.pl tool.

Signed-off-by: Johan Meiring <johanmeiring@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 14:18:40 -08:00
Sachin Kamat
30aeee29f6 staging: drm/imx: Remove duplicate inclusion of linux/videodev2.h
linux/videodev2.h was included twice.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 14:18:40 -08:00
Nobuhiro Iwamatsu
539eb5bca0 ARM: mvebu: Add support for I2C controllers in Armada 370/XP
The Armada 370 and Armada XP have the same I2C controllers as previous
Marvell SoCs, so the existing mv64xxx-i2c driver works fine.

[Thomas Petazzoni: updated on top of other Armada 370/XP changes,
rephrased the commit log].
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-21 23:17:34 +01:00
Bill Pemberton
53b8001985 staging: comedi: remove use of __devexit
CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 14:14:56 -08:00
Bill Pemberton
a690b7e535 staging: comedi: remove use of __devinit
CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 14:14:56 -08:00
Bill Pemberton
a471eace7b staging: comedi: remove use of __devexit_p
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 14:14:56 -08:00
NeilBrown
ca64cae960 md/raid5: Make sure we clear R5_Discard when discard is finished.
commit 9e44476851
    MD: raid5 avoid unnecessary zero page for trim

change raid5 to clear R5_Discard when the complete request is
handled rather than when submitting the per-device discard request.
However it did not clear R5_Discard for the parity device.

This means that if the stripe_head was reused before it expired from
the cache, the setting would be wrong and a hang would result.

Also if the R5_Uptodate bit happens to be set, R5_Discard again
won't be cleared.  But R5_Uptodate really should be clear at this point.

So make sure R5_Discard is cleared in all cases, and clear
R5_Uptodate when a 'discard' completes.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-11-22 09:14:13 +11:00
NeilBrown
ef5b7c69b7 md/raid5: move resolving of reconstruct_state earlier in
stripe_handle.

The chunk of code in stripe_handle which responds to a
*_result value in reconstruct_state is really the completion
of some processing that happened outside of handle_stripe
(possibly asynchronously) and so should be one of the first
things done in handle_stripe().

After the next patch it will be important that it happens before
handle_stripe_clean_event(), as that will clear some dev->flags
bit that this code tests.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-11-22 09:14:09 +11:00
Ian Abbott
971b5e5653 staging: comedi: me_daq: remove broken workaround for PLX bug
The PLX PCI 9050 interface chip has a bug where its local configuration
registers accessible through PCI BAR 0 and/or PCI BAR 1 (depending on
settings loaded from a serial EEPROM or local bus processor) are
unreadable (always read 0 instead of the true register values) if the
base address starts on an odd multiple of 0x80 (i.e.  has bit 7 set to
1).

The "me_daq" driver attempts to work around this by writing to the PCI
config space to swap the addresses assigned to PCI BAR 0 and PCI BAR 5
(which has been initially configured by serial EEPROM load as a spare
region of the same length as the PCI BAR 0 region).  (If the PCI BAR 5
region is absent, it attempts to reduce the PCI BAR 0 address by 0x80,
which is likely to cause havoc for some other device, but that case
shouldn't be reachable in practice.)

The workaround in the driver is ineffective because it has already
ioremapped the memory from `pci_resource_start(pcidev, 0)` *before* it
does the workaround, so after swapping PCI BAR 0 and PCI BAR 5, this
memory will end up accessing whatever onboard registers PCI BAR 5 was
linked to instead of the local configuration registers.  It also leaves
the addresses in the physical PCI BAR registers set differently to the
resource start addresses recorded in the `struct pci_dev`.

The workaround could be fixed by ioremapping `pci_resource_start(pcidev,
5)` if the PCI BAR addresses were physically swapped (and the fallback
workaround of subtracting 0x80 from the base address should really be
removed altogether).  However, it's not really worth it.  This sort of
thing should be worked around in "drivers/pci/quirks.c" by ensuring that
PCI BAR 0 and/or PCI BAR 1 do not end up on an odd multiple of 0x80
bytes.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 14:13:44 -08:00
Bill Pemberton
b59bc2fbb4 ACPI: remove use of __devexit
CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-21 23:13:09 +01:00
Lan Tianyu
876ab79055 ACPI / PM: Add Sony Vaio VPCEB1S1E to nonvs blacklist.
Sony Vaio VPCEB1S1E does not resume correctly without
acpi_sleep=nonvs, so add it to the ACPI sleep blacklist.

References: https://bugzilla.kernel.org/show_bug.cgi?id=48781
Reported-by: Sébastien Wilmet <swilmet@gnome.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-21 23:12:12 +01:00
Masanari Iida
a547e5e0d8 staging: dgrp: Fix typo in dgrp driver
Correct spelling typo in staging/dgrp driver

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 14:11:48 -08:00
Bill Pemberton
a4a557e3d4 staging: rtl8192u: remove use of __devexit
CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 14:07:43 -08:00
Bill Pemberton
1387b461af staging: rtl8192e: remove use of __devexit
CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 14:07:42 -08:00
Bill Pemberton
ea7e9f2a49 staging: rtl8187se: remove use of __devexit
CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 14:07:42 -08:00
Bill Pemberton
83f5789c10 staging: rtl8192e: remove use of __devinitdata
CONFIG_HOTPLUG is going away as an option so __devinitdata is no
longer needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 14:07:42 -08:00
Bill Pemberton
7df813d56f staging: rtl8187se: remove use of __devinitdata
CONFIG_HOTPLUG is going away as an option so __devinitdata is no
longer needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 14:07:42 -08:00
Bill Pemberton
19fc6b57db staging: rtl8187se: remove use of __devinit
CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 14:07:42 -08:00
Bill Pemberton
c506fff1ff staging: rtl8192e: remove use of __devinit
CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 14:07:42 -08:00
Bill Pemberton
2579452a6d staging: rtl8192u: remove use of __devinit
CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 14:07:42 -08:00
Bill Pemberton
c08561c5cf staging: rtl8192e: remove use of __devexit_p
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 14:07:42 -08:00
Bill Pemberton
435c78dfb8 staging: rtl8187se: remove use of __devexit_p
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 14:07:41 -08:00
MAACHE Mehdi
90c1076509 Staging: rtl8187se: remove check for IW_ENCODE_DISABLED
The original code had a no-op stub where it checked if
IW_ENCODE_DISABLED and did nothing.  Then in a cleanup patch we
accidentally turned the check on.  That was: de171bd6ff "Staging:
rtl8187se: r8180_wx: fixed a lot of checkpatch.pl issues".

The check should just be removed.

Signed-off-by: Mehdi MAACHE <mehdi.maache@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 14:00:01 -08:00
YAMANE Toshiaki
167989ba2e staging/rtl8187se: Fix spacing coding style in r8185b_init.c
The following errors and warnings fixed.
- ERROR: space prohibited after that open parenthesis '('
- ERROR: space prohibited before that close parenthesis ')'
- ERROR: space required before the open parenthesis '('
- WARNING: braces {} are not necessary for any arm of this statement

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 14:00:00 -08:00
YAMANE Toshiaki
545bb52ccd staging/rtl8187se: Use netdev_ printks in r8185b_init.c
The following warnings fixed.
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...
- WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 14:00:00 -08:00
YAMANE Toshiaki
0ef68ab4dd staging/rtl8187se: Fix spacing coding style in ieee80211/ieee80211_crypt_wep.c
The following errors and warnings fixed.
- ERROR: code indent should use tabs where possible
- WARNING: please, no spaces at the start of a line

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 14:00:00 -08:00
YAMANE Toshiaki
e10fbca953 staging/rtl8187se: Use pr_ printks in ieee80211/ieee80211_crypt_wep.c
The following warnings fixed.
- WARNING: Prefer netdev_dbg(netdev, ... then dev_dbg(dev, ... then pr_debug(...  to printk(KERN_DEBUG ...

and add pr_fmt.

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 14:00:00 -08:00
YAMANE Toshiaki
98319002a2 staging/rtl8187se: Fix spacing coding style in ieee80211/ieee80211_crypt_wep.c
The following errors fixed.
-ERROR: "foo * bar" should be "foo *bar"

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 14:00:00 -08:00
YAMANE Toshiaki
4de389bd05 staging/rtl8187se: Fix include file issue in ieee80211/ieee80211_crypt_wep.c
The following warning fixed.
- WARNING: Use #include <linux/string.h> instead of <asm/string.h>

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 14:00:00 -08:00
YAMANE Toshiaki
937afb70a0 staging/rtl8187se: Fix spacing coding style in ieee80211/ieee80211_crypt_ccmp.c
The following error and warning fixed.
- ERROR: code indent should use tabs where possible
- WARNING: braces {} are not necessary for single statement blocks

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 14:00:00 -08:00
YAMANE Toshiaki
d6f272c25a staging/rtl8187se: Use pr_ printks in ieee80211/ieee80211_crypt_ccmp.c
The following warnings fixed.
- WARNING: Prefer netdev_dbg(netdev, ... then dev_dbg(dev, ... then pr_debug(...  to printk(KERN_DEBUG ...

and add pr_fmt.

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 14:00:00 -08:00