Commit graph

361,345 commits

Author SHA1 Message Date
Malcolm Priestley
2a38e6fcf9 staging: vt6656: iwctl_giwaplist() re warn: possible memory leak of 'qual'
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15 15:26:14 -08:00
Kumar Amit Mehta
4087641b25 staging: rtl8192e: rtl8192e: rtl_core.c: Audit the return value of register_netdev()
Inspect the return value of register_netdev() in the driver probe routine and
return -ENODEV in case of error.

Signed-off-by: Kumar Amit Mehta <gmate.amit@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15 15:26:14 -08:00
Jiri Pirko
a652208e0b net: correct check in dev_addr_del()
Check (ha->addr == dev->dev_addr) is always true because dev_addr_init()
sets this. Correct the check to behave properly on addr removal.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-15 17:57:53 -05:00
David S. Miller
7213dde6c9 Merge branch 'for-davem' of git://gitorious.org/linux-can/linux-can-next
Marc Kleine-Budde says:

====================
this pull request is for net-next, for the v3.8 release cycle. Muhammad
Ghias added support another board to the plx_pci sja1000 driver.
Matthias Fuchs improved the esd_usb2 driver with listen-only mode and
CAN-USB/Micro support. Andreas Larsson contributed a driver for the
GRHCAN CAN IP-Core
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-15 17:50:24 -05:00
Patrick Trantham
4223dbffed net: phy: smsc: Re-enable EDPD mode for LAN87xx
This patch re-enables Energy Detect Power Down (EDPD) mode for the
LAN8710/LAN8720.  EDPD mode was disabled in a previous commit,
(b629820d18), because it was causing the
PHY to not be able to detect a link when cold started without a cable
connected.

The LAN8710/LAN8720 requires a minimum of 2 link pulses within 64ms of
each other in order to set the ENERGYON bit and exit EDPD mode.  If a
link partner does send the pulses within this interval, the PHY will
remained powered down.

This workaround will manually toggle the PHY on/off upon calls to
read_status in order to generate link test pulses if the link is down.
If a link partner is present, it will respond to the pulses, which will
cause the ENERGYON bit to be set and will cause the EDPD mode to be
exited.

Signed-off-by: Patrick Trantham <patrick.trantham@fuel7.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-15 17:48:50 -05:00
Andrew Vagin
ec34232575 tcp: fix retransmission in repair mode
Currently if a socket was repaired with a few packet in a write queue,
a kernel bug may be triggered:

kernel BUG at net/ipv4/tcp_output.c:2330!
RIP: 0010:[<ffffffff8155784f>] tcp_retransmit_skb+0x5ff/0x610

According to the initial realization v3.4-rc2-963-gc0e88ff,
all skb-s should look like already posted. This patch fixes code
according with this sentence.

Here are three points, which were not done in the initial patch:
1. A tcp send head should not be changed
2. Initialize TSO state of a skb
3. Reset the retransmission time

This patch moves logic from tcp_sendmsg to tcp_write_xmit. A packet
passes the ussual way, but isn't sent to network. This patch solves
all described problems and handles tcp_sendpages.

Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: James Morris <jmorris@namei.org>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-15 17:44:58 -05:00
Vlad Yasevich
f191a1d17f net: Remove code duplication between offload structures
Move the offload callbacks into its own structure.

Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-15 17:39:51 -05:00
Vlad Yasevich
c6b641a4c6 ipv6: Pull IPv6 GSO registration out of the module
Sing GSO support is now separate, pull it out of the module
and make it its own init call.
Remove the cleanup functions as they are no longer called.

Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-15 17:39:24 -05:00
Vlad Yasevich
808a8f8845 ipv4: Pull GSO registration out of inet_init()
Since GSO/GRO support is now separated, make IPv4 GSO a
stand-alone init call and not part of inet_init().

Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-15 17:39:23 -05:00
Vlad Yasevich
3c73a0368e ipv6: Update ipv6 static library with newly needed functions
UDP offload needs some additional functions to be in the static kernel
for it work correclty.  Move those functions into the core.

Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-15 17:39:23 -05:00
Vlad Yasevich
2207afc8bf ipv6: Move exthdr offload support into separate file
Move the exthdr offload functionality into a separeate
file in preparate for moving it out of the module

Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-15 17:36:18 -05:00
Vlad Yasevich
5edbb07dc9 ipv6: Separate out UDP offload functionality
Pull UDP GSO code into a separate file in preparation for moving
the code out of the module.

Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-15 17:36:18 -05:00
Vlad Yasevich
8663e02aba ipv6: Separate tcp offload functionality
Pull TCPv6 offload functionality into its won file in preparation
for moving it out of the module.

Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-15 17:36:18 -05:00
Vlad Yasevich
d1da932ed4 ipv6: Separate ipv6 offload support
Separate IPv6 offload functionality into its own file
in preparation for the move out of the module

Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-15 17:36:17 -05:00
Vlad Yasevich
3336288a9f ipv6: Switch to using new offload infrastructure.
Switch IPv6 protocol to using the new GRO/GSO calls and data.

Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-15 17:36:17 -05:00
Vlad Yasevich
bca49f843e ipv4: Switch to using the new offload infrastructure.
Switch IPv4 code base to using the new GRO/GSO calls and data.

Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-15 17:36:17 -05:00
Vlad Yasevich
8ca896cfdd ipv6: Add new offload registration infrastructure.
Create a new data structure for IPv6 protocols that holds GRO/GSO
callbacks and a new array to track the protocols that register GRO/GSO.

Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-15 17:36:17 -05:00
Vlad Yasevich
de27d001d1 net: Add net protocol offload registration infrustructure
Create a new data structure for IPv4 protocols that holds GRO/GSO
callbacks and a new array to track the protocols that register GRO/GSO.

Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-15 17:36:17 -05:00
Vlad Yasevich
22061d8014 net: Switch to using the new packet offload infrustructure
Convert to using the new GSO/GRO registration mechanism and new
packet offload structure.

Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-15 17:36:17 -05:00
Vlad Yasevich
62532da9d5 net: Add generic packet offload infrastructure.
Create a new data structure to contain the GRO/GSO callbacks and add
a new registration mechanism.

Singed-off-by: Vlad Yasevich <vyasevic@redhat.com>

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-15 17:36:16 -05:00
Stephen Warren
6254f95b7c ARM: tegra: defconfig updates
New options enabled:
* BRCMFMAC: wlan driver, enable as module.
* MTD, MTD_CHAR, MTD_M25P80, SPI_TEGRA20_SLINK, CONFIG_SPI_TEGRA20_SFLASH
  to enable serial flash on Cardhu and TrimSlice.
* PWM/backlight features for use with tegradrm.
* tegradrm; Tegra's new display driver.
* CMA, so that tegradrm can allocate large buffers.
* SquashFS, which is used as the root filesystem on boards based on
  the Tamonten processor module.

Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:22:12 -07:00
Hiraku Toyooka
d60da506cb tracing: Add a resize function to make one buffer equivalent to another buffer
Trace buffer size is now per-cpu, so that there are the following two
patterns in resizing of buffers.

  (1) resize per-cpu buffers to same given size
  (2) resize per-cpu buffers to another trace_array's buffer size
      for each CPU (such as preparing the max_tr which is equivalent
      to the global_trace's size)

__tracing_resize_ring_buffer() can be used for (1), and had
implemented (2) inside it for resetting the global_trace to the
original size.

(2) was also implemented in another place. So this patch assembles
them in a new function - resize_buffer_duplicate_size().

Link: http://lkml.kernel.org/r/20121017025616.2627.91226.stgit@falsita

Signed-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-11-15 17:10:21 -05:00
Joseph Lo
29a0e7beab ARM: tegra: retain L2 content over CPU suspend/resume
The L2 RAM is in different power domain from the CPU cluster. So the
L2 content can be retained over CPU suspend/resume. To do that, we
need to disable L2 after the MMU is disabled, and enable L2 before
the MMU is enabled. But the L2 controller is in the same power domain
with the CPU cluster. We need to restore it's settings and re-enable
it after the power be resumed.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:09:22 -07:00
Joseph Lo
d552920a02 ARM: tegra30: cpuidle: add powered-down state for CPU0
This is a power gating idle mode. It support power gating vdd_cpu rail
after all cpu cores in "powered-down" status. For Tegra30, the CPU0 can
enter this state only when all secondary CPU is offline. We need to take
care and make sure whole secondary CPUs were offline and checking the
CPU power gate status. After that, the CPU0 can go into "powered-down"
state safely. Then shut off the CPU rail.

Be aware of that, you may see the legacy power state "LP2" in the code
which is exactly the same meaning of "CPU power down".

Base on the work by:
Scott Williams <scwilliams@nvidia.com>

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:09:22 -07:00
Joseph Lo
01459c69dd ARM: tegra30: flowctrl: add cpu_suspend_exter/exit function
The flow controller can help CPU to go into suspend mode (powered-down
state). When CPU go into powered-down state, it needs some careful
settings before getting into and after leaving. The enter and exit
functions do that by configuring appropriate mode for flow controller.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:09:21 -07:00
Joseph Lo
a6e293eef2 ARM: tegra30: clocks: add CPU low-power function into tegra_cpu_car_ops
Add suspend, resume and rail_off_ready API into tegra_cpu_car_ops. These
functions were used for CPU powered-down state maintenance. One thing
needs to notice the rail_off_ready API only availalbe for cpu_g cluster
not cpu_lp cluster.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:09:21 -07:00
Joseph Lo
fe508d7769 ARM: tegra30: common: enable csite clock
Enable csite (debug and trace controller) clock at init to prevent it
be disabled. And this also the necessary clock for CPU be brought up or
resumed from a power-gating low power state.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:09:21 -07:00
Joseph Lo
d457ef358f ARM: tegra30: cpuidle: add powered-down state for secondary CPUs
This supports power-gated idle on secondary CPUs for Tegra30. The
secondary CPUs can go into powered-down state independently. When
CPU goes into this state, it saves it's contexts and puts itself
to flow controlled WFI state. After that, it will been power gated.

Be aware of that, you may see the legacy power state "LP2" in the
code which is exactly the same meaning of "CPU power down".

Based on the work by:
Scott Williams <scwilliams@nvidia.com>

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:09:21 -07:00
Joseph Lo
d3f293656c ARM: tegra: cpuidle: add CPU resume function
The CPU suspending on Tegra means CPU power gating. We add a resume
function for taking care the CPUs that resume from power gating status.
This function was been hooked to the reset handler. We take care
everything here before go into kernel.

Be aware of that, you may see the legacy power status "LP2" in the code
which is exactly the same meaning of "CPU power down".

Based on the work by:
Scott Williams <scwilliams@nvidia.com>
Colin Cross <ccross@android.com>
Gary King <gking@nvidia.com>

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:09:21 -07:00
Joseph Lo
0b25e25bef ARM: tegra: cpuidle: separate cpuidle driver for different chips
The different Tegra chips may have different CPU idle states and data.
Individual CPU idle driver make it more easy to maintain.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:09:20 -07:00
Joseph Lo
641b4ef8f1 ARM: tegra: rename the file of "sleep-tXX" to "sleep-tegraXX"
For the naming consistency under the mach-tegra, we re-name the file of
"sleep-tXX" to "sleep-tegraXX" (e.g., sleep-t30 to sleep-tegra30).

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:09:01 -07:00
Joseph Lo
d5db9a4422 ARM: tegra: cpuidle: replace LP3 with ARM_CPUIDLE_WFI_STATE
The Tegra CPU idle LP3 state is doing ARM WFI only. So it's same with
the common ARM_CPUIDLE_WFI_STATE. Using it to replace LP3 now.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:08:28 -07:00
Thierry Reding
ed39097c2a ARM: tegra: Add Tegra30 host1x support
Add the host1x node along with its children to the Tegra30 DTSI. Board-
specific DTS files are expected to enable the available outputs and
complement the device tree with data specific to the hardware.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:07:31 -07:00
Thierry Reding
ed821f0709 ARM: tegra: Add Tegra20 host1x support
Add the host1x node along with its children to the Tegra20 DTSI. Board-
specific DTS files are expected to enable the available outputs and
complement the device tree with data specific to the hardware.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:07:30 -07:00
Stephen Warren
fea221e254 ARM: tegra: trimslice: enable SPI flash
TrimSlice contains a 1MiB SPI flash. Represent this in the device tree.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:07:30 -07:00
Laxman Dewangan
fa98a114bf ARM: tegra: dts: add sflash controller dt entry
Nvidia's Tegra20 have the SPI (SFLASH) controller to
interface with spi flash device which is used for system
boot. Add DT entry for this controller.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
[swarren: move sflash node to keep file sorted]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:07:30 -07:00
Thierry Reding
ee9f726040 ARM: tegra: ventana: Add NCT1008 temperature sensor
The Harmony board has an ON Semiconductors NCT1008 temperature sensor
connected to the DVC bus. It can be used to monitor the ambient (local)
and on-die (remote) temperatures.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:07:30 -07:00
Thierry Reding
840a40807f ARM: tegra: tamonten: Add NCT1008 temperature sensor
The Tamonten SOM has an ON Semiconductor NCT1008 connected to the DVC
bus which is used to measure the ambient (local) temperature as well as
the on-die (remote) temperature.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:07:29 -07:00
Thierry Reding
42d2534a92 ARM: tegra: harmony: Add ADT7641 temperature sensor
The Harmony board has an Analog Devices ADT7461 temperature sensor
connected to the DVC bus. It can be used to monitor the ambient (local)
and on-die (remote) temperatures.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:07:29 -07:00
Thierry Reding
b28113e249 ARM: tegra: tec: Remove redundant DT properties
These properties are already set by the tegra20-tamonten.dtsi, so they
don't need to be repeated.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:07:29 -07:00
Thierry Reding
ec31990372 ARM: tegra: tamonten: Add DDC/PTA pinmux
This commit allows the I2C2 controller on Tegra20 to be routed either to
the DDC or the PTA pin group at runtime. On Tamonten this allows the I2C
bus to be used for the DDC of the HDMI connector or to access I2C chips
on the carrier board.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:07:29 -07:00
Laxman Dewangan
c42cb1c379 ARM: tegra: dts: cardhu: enable SLINK4
Enable SLINK4 and connected device in Tegra30 based
platform Cardhu.
Setting maximum spi frequency to 25MHz.

SPI serial flash is connected on CS1 of SLINK4 on
cardhu platform.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
[swarren: swapped reg/compatible order to be consistent]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:07:29 -07:00
Laxman Dewangan
a86b0db3c0 ARM: tegra: dts: add slink controller dt entry
Add slink controller details in the dts file of
Tegra20 and Tegra30.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:07:29 -07:00
Mark Zhang
cf63346401 ARM: dt: tegra: ventana: define pinmux for ddc
Tegra 2's I2C2 controller can be routed to either the PTA
or DDC pin group on Ventana. So:
- Remove the HDMI function definition of pta pingroup
- Define child i2c adapters(ddc & pta) for I2C2 controller

Signed-off-by: Mark Zhang <markz@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:07:28 -07:00
Wei Ni
6fb11131ef ARM: dt: t30 cardhu: set pinmux and power for wlan
Configure pinmux as required for WiFi.
Enable the SDHCI1 controller for a02 and a04 board, which is connected to the
WiFi module.
For now, always enable the regulator that provides power to the Wifi module.

Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:07:28 -07:00
Wei Ni
c729429e0c ARM: dt: t20 ventana: set pinmux and power for wlan
Configure pinmux as required for WiFi.
Enable the SDHCI1 controller, which is connectted to the WiFi module.

Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:07:28 -07:00
Wei Ni
da2fc651e4 ARM: dt: t20 seaboard: turn on the power for wlan
Enable the SDHCI1 controller. This is connected to the WiFi module.

Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:07:28 -07:00
Thierry Reding
d1d3b978f6 ARM: tegra: Add Tegra30 host1x clock support
Setup the clock parents for the two display controllers and HDMI.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 14:46:29 -07:00
Thierry Reding
2acc1fc282 ARM: tegra: Add AUXDATA for Tegra30 host1x
Add the OF_DEV_AUXDATA table entries required to associate the proper
names with host1x and its children. In turn, this allows the devices to
find the required clocks.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 14:46:28 -07:00
Thierry Reding
5f10778370 ARM: tegra: Add Tegra20 host1x clock support
Extend the pll_d frequency table with a few entries to support common
HDMI and LVDS display modes and setup the clock parents for the two
display controllers and HDMI.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 14:46:26 -07:00