Commit graph

361,345 commits

Author SHA1 Message Date
Shmulik Ladkani
438db5a92b mtd: cmdlinepart: Simplify parse_cmdline_partitions
Simply 'parse_cmdline_partitions': the outer loop iterating over
'partitions' is actually a search loop, it does not execute the inner
loop for each partition, only for the matched partition.

Let's break when search is successful, and move all inner code (relevant
only for the matched partition) outside of the outer loop.

Resulting code is much more readable, and makes the indent level sane.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-15 15:37:45 +02:00
Brian Norris
6924d99fcd mtd: nand: fix Samsung SLC detection regression
This patch fixes errors seen in identifying old Samsung SLC, due to the
following commits:

    commit e2d3a35ee4
    mtd: nand: detect Samsung K9GBG08U0A, K9GAG08U0F ID

    commit e3b88bd604
    mtd: nand: add generic READ ID length calculation functions

Some Samsung NAND with "5-byte" ID really appear to have 6-byte IDs, with
wraparound like:

  Samsung K9K8G08U0D
  ec d3 51 95 58 ec ec d3

  Samsung K9F1G08U0C
  ec f1 00 95 40 ec ec f1

  Samsung K9F2G08U0B
  ec da 10 95 44 00 ec da

This bad wraparound makes it hard to reliably detect the difference
between Samsung SLC with 5-byte ID and Samsung SLC with 6-byte ID.

The fix is to, for now, only use the new Samsung table for MLC. We
cannot support the new SLC (K9FAG08U0M) until Samsung gives better ID
decode information.

Note that this applies in addition to the previous regression fix:

    commit bc86cf7af2
    mtd: nand: fix Samsung SLC NAND identification regression

Together, these patches completely restore the previous detection
behavior so that we cannot see any more regressions in Samsung SLC NAND
(finger crossed). With luck, I can get a hold of a Samsung
representative and stop having to cross my fingers eventually.

Reported-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-15 15:37:43 +02:00
Brian Norris
af451af4e0 mtd: nand: fix Samsung SLC NAND identification regression
A combination of the following two commits caused a regression in 3.7-rc1
when identifying some Samsung NAND, so that some previously working NAND
were no longer detected properly:

    commit e3b88bd604
    mtd: nand: add generic READ ID length calculation functions

    commit e2d3a35ee4
    mtd: nand: detect Samsung K9GBG08U0A, K9GAG08U0F ID

Particularly, a regression was seen on Samsung K9F2G08U0B, with the
following full 8-byte READ ID string:

    ec da 10 95 44 00 ec da

The basic problem is that Samsung manufactures both SLC and MLC NAND
that use a non-standard decoding table for deriving information from
their IDs. I have heuristically determined that all the chips that use
the new table have ID strings which wrap around after the 6th byte.
Unfortunately, I overlooked the fact that some older Samsung SLC (which
use a different decoding table) have "5 byte ID strings" which also wrap
around after the 6th byte.

This patch re-introduces a distinction between these old and new Samsung
NAND by checking that the 6th byte is non-zero, allowing both old and
new Samsung NAND to be detected properly.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Tested-by: Brian Norris <computersforpeace@gmail.com>
Reported-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-15 15:37:16 +02:00
Greg Rose
b9dd245bc6 ixgbevf: Streamline the rx buffer allocation
Moves allocation of local variable to section where it is needed and
removes unnecessary if statement.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-11-15 05:35:12 -08:00
Alexander Duyck
07bd34db29 ioat: Do not enable DCA if tag map is invalid
I have encountered several systems that have an invalid tag map.  This
invalid tag map results in only two tags being generated 0x1F which is
usually applied to the first core in a Hyper-threaded pair and 0x00 which
is applied to the second core in a Hyper-threaded pair.  The net result of
all this is that DCA causes significant cache thrash because the 0x1F tag
will send traffic to the second socket, which the 0x00 tag will not DCA tag
the frame resulting in no benefit.

For now the best solution from the driver's perspective is to just disable
DCA if the tag map is invalid.  The correct solution for this would be to
have the BIOS on affected systems updated so that the correct tags are
generated for a given APIC ID.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-11-15 05:20:01 -08:00
hongbo.zhang
dc1956b5f8 Thermal: Add ST-Ericsson DB8500 thermal properties and platform data.
This patch adds device tree properties for ST-Ericsson DB8500 thermal driver,
also adds the platform data to support the old fashion.

Signed-off-by: hongbo.zhang <hongbo.zhang@linaro.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2012-11-15 20:51:02 +08:00
hongbo.zhang
aa1acb0451 Thermal: Add ST-Ericsson DB8500 thermal driver.
This driver is based on the thermal management framework in thermal_sys.c. A
thermal zone device is created with the trip points to which cooling devices
can be bound, the current cooling device is cpufreq, e.g. CPU frequency is
clipped down to cool the CPU, and other cooling devices can be added and bound
to the trip points dynamically.  The platform specific PRCMU interrupts are
used to active thermal update when trip points are reached.

Signed-off-by: hongbo.zhang <hongbo.zhang@linaro.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Francesco Lavra <francescolavra.fl@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2012-11-15 20:50:34 +08:00
Haojian Zhuang
49ea7fc094 ARM: pxa: remove pxa95x support
PXA95x isn't widely used. And it adds the effort on supporting
multiple platform. So remove it.

The assumption is that nobody will miss this support. If you are
reading this text because you actually require pxa95x support on
a new kernel, we can work out a way to revert this patch or add
support to the mmp platform.

Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-11-15 13:50:13 +01:00
Zhang Rui
445110e9d0 drivers/thermal/Makefile refactor
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2012-11-15 20:41:47 +08:00
Zhang Rui
ec54c74c8f Exynos: Add missing dependency
CPU_FREQ_TABLE depends on CPU_FREQ. Selecting CPU_FREQ_TABLE without checking
for dependencies gives the following compilation warnings:
warning: (ARCH_TEGRA_2x_SOC && ARCH_TEGRA_3x_SOC && UX500_SOC_DB8500 &&
CPU_THERMAL && EXYNOS_THERMAL) selects CPU_FREQ_TABLE which has unmet
direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ)

Based-on-patch-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2012-11-15 20:41:46 +08:00
Zhang Rui
72e1989782 Refactor drivers/thermal/Kconfig
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2012-11-15 20:41:30 +08:00
Stanislav Kinsbursky
0912128149 nfsd: make laundromat network namespace aware
This patch moves laundromat_work to nfsd per-net context, thus allowing to run
multiple laundries.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-15 07:40:51 -05:00
Stanislav Kinsbursky
12760c6685 nfsd: pass nfsd_net instead of net to grace enders
Passing net context looks as overkill.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-15 07:40:50 -05:00
Stanislav Kinsbursky
3320fef19b nfsd: use service net instead of hard-coded init_net
This patch replaces init_net by SVC_NET(), where possible and also passes
proper context to nested functions where required.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-15 07:40:50 -05:00
Stanislav Kinsbursky
73758fed71 nfsd: make close_lru list per net
This list holds nfs4 clients (open) stateowner queue for last close replay,
which are network namespace aware. So let's make this list per network
namespace too.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-15 07:40:49 -05:00
Stanislav Kinsbursky
5ed58bb243 nfsd: make client_lru list per net
This list holds nfs4 clients queue for lease renewal, which are network
namespace aware. So let's make this list per network namespace too.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-15 07:40:48 -05:00
Stanislav Kinsbursky
1872de0e81 nfsd: make sessionid_hashtbl allocated per net
This hash holds established sessions state and closely associated with
nfs4_clients info, which are network namespace aware. So let's make it
allocated per network namespace too.

Note: this hash can be allocated in per-net operations. But it looks
better to allocate it on nfsd state start and thus don't waste resources
if server is not running.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-15 07:40:47 -05:00
Stanislav Kinsbursky
20e9e2bc98 nfsd: make lockowner_ino_hashtbl allocated per net
This hash holds file lock owners and closely associated with nfs4_clients info,
which are network namespace aware. So let's make it allocated per network
namespace too.

Note: this hash can be allocated in per-net operations. But it looks
better to allocate it on nfsd state start and thus don't waste resources
if server is not running.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-15 07:40:47 -05:00
Stanislav Kinsbursky
9b53113740 nfsd: make ownerstr_hashtbl allocated per net
This hash holds open owner state and closely associated with nfs4_clients
info, which are network namespace aware. So let's make it allocated per
network namespace too.

Note: this hash can be allocated in per-net operations. But it looks
better to allocate it on nfsd state start and thus don't waste resources
if server is not running.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-15 07:40:46 -05:00
Stanislav Kinsbursky
a99454aa4f nfsd: make unconf_name_tree per net
This hash holds nfs4_clients info, which are network namespace aware.
So let's make it allocated per network namespace.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-15 07:40:45 -05:00
Stanislav Kinsbursky
0a7ec37727 nfsd: make unconf_id_hashtbl allocated per net
This hash holds nfs4_clients info, which are network namespace aware.
So let's make it allocated per network namespace.

Note: this hash can be allocated in per-net operations. But it looks
better to allocate it on nfsd state start and thus don't waste resources
if server is not running.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-15 07:40:45 -05:00
Stanislav Kinsbursky
382a62e76c nfsd: make conf_name_tree per net
This tree holds nfs4_clients info, which are network namespace aware.
So let's make it per network namespace.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-15 07:40:44 -05:00
Stanislav Kinsbursky
8daae4dc0d nfsd: make conf_id_hashtbl allocated per net
This hash holds nfs4_clients info, which are network namespace aware.
So let's make it allocated per network namespace.

Note: this hash can be allocated in per-net operations. But it looks
better to allocate it on nfsd state start and thus don't waste resources
if server is not running.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-15 07:40:43 -05:00
Stanislav Kinsbursky
52e19c09a1 nfsd: make reclaim_str_hashtbl allocated per net
This hash holds nfs4_clients info, which are network namespace aware.
So let's make it allocated per network namespace.

Note: this hash is used only by legacy tracker. So let's allocate hash in
tracker init.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-15 07:40:43 -05:00
Stanislav Kinsbursky
c212cecfa2 nfsd: make nfs4_client network namespace dependent
And use it's net where possible.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-15 07:40:42 -05:00
Stanislav Kinsbursky
7f2210fa6b nfsd: use service net instead of hard-coded net where possible
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-15 07:40:41 -05:00
J. Bruce Fields
621eb19ce1 svcrpc: Revert "sunrpc/cache.h: replace simple_strtoul"
Commit bbf43dc888 "sunrpc/cache.h: replace
simple_strtoul" introduced new range-checking which could cause get_int
to fail on unsigned integers too large to be represented as an int.

We could parse them as unsigned instead--but it turns out svcgssd is
actually passing down "-1" in some cases.  Which is perhaps stupid, but
there's nothing we can do about it now.

So just revert back to the previous "sloppy" behavior that accepts
either representation.

Cc: stable@vger.kernel.org
Reported-by: Sven Geggus <lists@fuchsschwanzdomain.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-15 07:40:32 -05:00
Linus Walleij
c9b1c7b34a ARM: ux500: fix pin warning
Recent pin changes produce this warning:

arch/arm/mach-ux500/board-mop500-pins.c:73:22:
error: 'out_hi_wkup_pdis' defined but not used
[-Werror=unused-variable]

Fix this by deleting the offending definition.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-11-15 13:16:08 +01:00
Rafael J. Wysocki
5133375bb4 ACPI / PM: Fix build problem when CONFIG_ACPI or CONFIG_PM is not set
Commit e5cc8ef (ACPI / PM: Provide ACPI PM callback routines for
subsystems) introduced a build problem occuring if CONFIG_ACPI is
unset or CONFIG_PM is unset and errno.h is not included before
acpi.h, because in that case ENODEV used in acpi.h is undefined.

Fix the issue by making acpi.h include errno.h.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 13:15:37 +01:00
Viresh Kumar
f92bc45ffd Pinctrl/spear: plgpio: don't call prepare/unprepare
SPEAr SoC's don't do anything in clk_prepare() of plgpio driver,
so there is no need to call this routine multiple times. Just
call it once at probe.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15 12:34:56 +01:00
Axel Lin
9804049097 pinctrl: plgpio: Call clk_disable_unprepare only if clk_prepare_enable is called
This driver allows clk_get() failure, and still work without it.
This patch adds !IS_ERR(plgpio->clk) checking in plgpio_request() error path
so we only call clk_disable_unprepare() if clk_prepare_enable() is called.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15 12:33:11 +01:00
Axel Lin
6f37b1b4d4 pinctrl: spear: Make get_gpio_pingroup return NULL when no gpio_pingroup found
Currently get_gpio_pingroup() may return NULL or ERR_PTR(-EINVAL) when
no gpio_pingroup found. The caller in gpio_request_endisable() only
checks if the return value is NULL. Return ERR_PTR(-EINVAL) for
get_gpio_pingroup() causes problem and seems not necessary.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15 12:31:23 +01:00
Axel Lin
80357203ec pinctrl: coh901: Return proper error if irq_domain_add_linear() fails
Return -ENOMEM instead of 0 if irq_domain_add_linear fails.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15 12:17:04 +01:00
Axel Lin
4484d0b179 pinctrl: spear: Fix the logic of setting reg in pmx_init_gpio_pingroup_addr
Current code does not work if count > 1, fix it.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15 12:05:40 +01:00
Axel Lin
8d1c6ef67a pinctrl: imx: Fix the logic checking if not able to find pin reg map
Current code sets "pin_reg = &info->pin_regs[i];" in each loop iteration,
so in the case of no-match, pin_reg is not NULL.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Dong Aisheng <dong.aisheng@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15 12:03:07 +01:00
Arnd Bergmann
cbc351abe3 pinctrl/samsung: don't allow enabling pinctrl-samsung standalone
The main samsung pinctrl module references the specific exynos4210
pinctrl driver, which selects the main driver in Kconfig.

Making the main driver a silent "bool" option avoid this potential
build error if CONFIG_PINCTRL_SAMSUNG=y && CONFIG_PINCTRL_EXYNOS4=n:

drivers/built-in.o:(.rodata+0x4e4): undefined reference to `exynos4210_pin_ctrl'

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15 11:58:24 +01:00
Michal Simek
fd11ff7380 microblaze: Fix bug with schedule_tail
Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-11-15 11:56:27 +01:00
Grant Likely
da63d20bfb Linux 3.7-rc5
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJQn526AAoJEHm+PkMAQRiGQJoH/RAk2zmryS6wEpsdp7kl0pez
 DA7iI0lkBD/2s6gb3xbgqiuLpYoj8FZsNfKia8G9gcMo+BxL7tO46J4seki7UUZc
 Zt219olN6bfTlBToVtUsPPA758aMQ7SDJqe6ZPm3Znj8Zwcp8KodszJ6h5oeuPkj
 rkglyZwTxmbkFWu7TddIKVs4Gcb0CGuCx4gx6IWdYomgblwhZCnmFgHKmuiFXz2Z
 0PonP2ANBnUeihZYENTrpJFc0iBeA6HUVdTMeHqEeSGg5jyp3kYHhSj8NLKx16Xl
 CvI8d4kGpH6CPL7VCJo8BUh0DuR1MXdS++YpjPHasC2DkwatXQ7FLjmYs8RIJ3A=
 =dZwT
 -----END PGP SIGNATURE-----

Merge tag 'v3.7-rc5' into devicetree/next

Linux 3.7-rc5
2012-11-15 10:34:22 +00:00
Axel Lin
102caad905 pinctrl: tegra: Staticize non-exported symbols
They are not referenced outside of this file, make them static.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15 11:21:47 +01:00
Patrice Chotard
896a95ba13 pinctrl/nomadik: db8540: split clkout group
The clkout group is split into groups clkout1 and clkout2
which allows pins cklkout1 and clkout2 to be muxed
separately.

Signed-off-by: Patrice Chotard <patrice.chotard@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15 11:21:47 +01:00
Patrice Chotard
edbdfa8df0 pinctrl/nomadik: db8500: split clkout group
The clkout group is split into groups clkout1 and clkout2
which allows pins cklkout1 and clkout2 to be muxed
separately.

Signed-off-by: Patrice Chotard <patrice.chotard@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15 11:21:46 +01:00
Axel Lin
72facfea71 pinctrl: pxa3xx: Remove phy_base and phy_size from struct pxa3xx_pinmux_info
They are not used, remove them.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15 11:21:46 +01:00
Axel Lin
9387760db2 pinctrl: pxa3xx: Use devm_request_and_ioremap
Use managed resources API to simplify the code.
Also ensure we do request mem_region before ioremap.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15 11:21:45 +01:00
Axel Lin
507ccdbfd8 pinctrl: tegra: Make PINCTRL_TEGRA select PINMUX && PINCONF
Then we can remove "select PINMUX && PINCONF" from PINCTRL_TEGRA{20,30}.
This simplifies the dependency.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15 11:21:32 +01:00
David Teigland
4e2f8849de GFS2: remove redundant lvb pointer
The lksb struct already contains a pointer to the lvb,
so another directly from the glock struct is not needed.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-11-15 10:17:22 +00:00
David Teigland
dba2d70c5d GFS2: only use lvb on glocks that need it
Save the effort of allocating, reading and writing
the lvb for most glocks that do not use it.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-11-15 10:16:59 +00:00
Benjamin Tissoires
88c687b3e6 HID: usbhid: add quirk HID_QUIRK_NOGET to TPV optical touchscreen
Without this, the device is blocked in dmesg at:
hid-multitouch 0003:25AA:8883.000X: usb_submit_urb(ctrl) failed: -1
hid-multitouch 0003:25AA:8883.000X: timeout initializing reports

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-15 10:34:57 +01:00
Benjamin Tissoires
1b42fc4a28 HID: multitouch: fix Win 8 protocol
The Win 8 protocol specify the fact that each valid touch must be reported
within a frame until it is released.
We can therefore use the always_valid quirk and dismiss reports when we see
duplicate contacts ID.

We recognize Win8 certified devices from their vendor feature 0xff0000c5
where Microsoft put a signed blob in the report to check if the device
passed the certification.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-15 10:19:00 +01:00
Benjamin Tissoires
9b3bb9b8b6 HID: multitouch: support for hovering devices
Win8 devices supporting hovering must provides InRange HID field.
The information that the finger is here but is not touching the surface
is sent to the user space through ABS_MT_DISTANCE as required by the
multitouch protocol.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-15 10:17:52 +01:00
Benjamin Tissoires
2872839904 HID: multitouch: add MT_QUIRK_IGNORE_DUPLICATES
This quirk allows a device to reuse a contact id when sending garbage
inactive contacts at the end of a report.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-15 10:17:21 +01:00