Commit graph

361,345 commits

Author SHA1 Message Date
Amerigo Wang
e086cadc08 net: unify for_each_ip_tunnel_rcu()
The defitions of for_each_ip_tunnel_rcu() are same,
so unify it. Also, don't hide the parameter 't'.

Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14 18:49:50 -05:00
Amerigo Wang
aa0010f880 net: convert __IPTUNNEL_XMIT() to an inline function
__IPTUNNEL_XMIT() is an ugly macro, convert it to a static
inline function, so make it more readable.

IPTUNNEL_XMIT() is unused, just remove it.

Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14 18:49:50 -05:00
LongX Zhang
4b6d1f12f9 driver core / PM: move the calling to device_pm_remove behind the calling to bus_remove_device
We hit an hang issue when removing a mmc device on Medfield Android phone by sysfs interface.

device_pm_remove will call pm_runtime_remove which would disable
runtime PM of the device. After that pm_runtime_get* or
pm_runtime_put* will be ignored. So if we disable the runtime PM
before device really be removed, drivers' _remove callback may
access HW even pm_runtime_get* fails. That is bad.

Consider below call sequence when removing a device:
device_del => device_pm_remove
             => class_intf->remove_dev(dev, class_intf)  => pm_runtime_get_sync/put_sync
             => bus_remove_device => device_release_driver => pm_runtime_get_sync/put_sync

remove_dev might call pm_runtime_get_sync/put_sync.
Then, generic device_release_driver also calls pm_runtime_get_sync/put_sync.
Since device_del => device_pm_remove firstly, later _get_sync wouldn't really wake up the device.

I git log -p to find the patch which moves the calling to device_pm_remove ahead.
It's below patch:

commit  775b64d2b6
Author: Rafael J. Wysocki <rjw@sisk.pl>
Date:   Sat Jan 12 20:40:46 2008 +0100

     PM: Acquire device locks on suspend

     This patch reorganizes the way suspend and resume notifications are
     sent to drivers.  The major changes are that now the PM core acquires
     every device semaphore before calling the methods, and calls to
     device_add() during suspends will fail, while calls to device_del()
     during suspends will block.

     It also provides a way to safely remove a suspended device with the
     help of the PM core, by using the device_pm_schedule_removal() callback
     introduced specifically for this purpose, and updates two drivers (msr
     and cpuid) that need to use it.

As device_pm_schedule_removal is deleted by another patch, we need also revert other parts of the patch,
i.e. move the calling of device_pm_remove after the calling to bus_remove_device.

Signed-off-by: LongX Zhang <longx.zhang@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:37:09 +01:00
Davidlohr Bueso
8316bd72c0 PM / Hibernate: use rb_entry
Since the software suspend extents are organized in an rbtree, use rb_entry
instead of container_of, as it is semantically more appropriate in order to
get a node as it is iterated.

Signed-off-by: Davidlohr Bueso <dave@gnu.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:37:08 +01:00
Daniel Walter
883ee4f79d PM / sysfs: replace strict_str* with kstrto*
Replace strict_strtoul() with kstrtoul() in pm_async_store() and
pm_qos_power_write().

[rjw: Modified subject and changelog.]

Signed-off-by: Daniel Walter <sahne@0x90.at>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:37:08 +01:00
Murali Karicheri
c122f27e1c base: power - use clk_prepare_enable and clk_prepare_disable
When PM runtime is enabled in DaVinci and the machine migrates to
common clk framework, the clk_enable() gets called without
clk_prepare(). This patch is to fix this issue so that PM run
time can inter work with common clk framework.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:36:43 +01:00
Wei Yongjun
ea83f81b48 PM / OPP: using kfree_rcu() to simplify the code
The callback function of call_rcu() just calls a kfree(), so we
can use kfree_rcu() instead of call_rcu() + callback function.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:36:10 +01:00
Nishanth Menon
0779726cc2 PM / OPP: predictable fail results for opp_find* functions, v2
Currently the opp_find* functions return -ENODEV when:
a) it cant find a device (e.g. request for an OPP search on device
   which was not registered)
b) When it cant find a match for the search strategy used

This makes life a little in-efficient for users such as devfreq
to make reasonable judgement before switching search strategies.

So, standardize the return results as following:
 -EINVAL for bad pointer parameters
 -ENODEV when device cannot be found
 -ERANGE when search fails

This has the following benefit for devfreq implementation:
The search fails when an unregistered device pointer is provided.
This is a trigger to change the search direction and search for
a better fit, however, if we cannot differentiate between a valid
search range failure Vs an unregistered device, second search goes
through the same fail return condition. This can be avoided by
appropriate handling of error return code.

With this change, we also fix devfreq for the improved search
strategy with updated error code.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:36:10 +01:00
Liam Girdwood
80126ce7ae PM / OPP: Export symbols for module usage.
Export the OPP functions for use by driver modules.

Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Kevin Hilman <khilman@ti.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

[nm@ti.com: expansion of functions exported]
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Liam Girdwood <lrg@ti.com>
Acked-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:36:10 +01:00
Vincent Guittot
dde8437d06 PM / OPP: RCU reclaim
synchronize_rcu() blocks the caller of opp_enable/disbale
for a complete grace period. This blocking duration prevents
any intensive use of the functions. Replace synchronize_rcu()
by call_rcu() which will call our function for freeing the old
opp element.

The duration of opp_enable() and opp_disable() will be no more
dependant of the grace period.

Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:36:09 +01:00
Nishanth Menon
1a1357ea17 PM / devfreq: make devfreq_class static
devfreq_class is used internally by devfreq and has no
need to be globally available.

This also fixes the following sparse warning:
drivers/devfreq/devfreq.c:30:14: warning: symbol 'devfreq_class' was not declared. Should it be static?

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:35:06 +01:00
Nishanth Menon
12e26265e6 PM / devfreq: fix sscanf handling for writable sysfs entries
sscanf returns 0 when an invalid parameter like:
echo -n "a">min_freq
is attempted. Returning back the return result(0) will
cause the command not to return back to command
prompt.

Instead, just return -EINVAL when sscanf does not
return 1.

This is done for min_freq, max_freq and polling_interval

Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:35:05 +01:00
Nishanth Menon
c5b4a1c15d PM / devfreq: kernel-doc typo corrections
Parameter documentation needs a ':' for scripts/kernel-doc
to parse properly.

Minor fixes for ones warned by:
./scripts/kernel-doc -text drivers/devfreq/devfreq.c>/dev/null

Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:35:05 +01:00
Rajagopal Venkat
7f98a905dc PM / devfreq: Add current freq callback in device profile
Devfreq returns governor predicted frequency as current frequency
via sysfs interface. But device may not support all frequencies
that governor predicts. So add a callback in device profile to get
current freq from driver. Also add a new sysfs node to expose
governor predicted next target frequency.

Signed-off-by: Rajagopal Venkat <rajagopal.venkat@linaro.org>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:35:04 +01:00
Rajagopal Venkat
206c30cfeb PM / devfreq: Add suspend and resume apis
Add devfreq suspend/resume apis for devfreq users. This patch
supports suspend and resume of devfreq load monitoring, required
for devices which can idle.

Signed-off-by: Rajagopal Venkat <rajagopal.venkat@linaro.org>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:35:04 +01:00
Rajagopal Venkat
7e6fdd4bad PM / devfreq: Core updates to support devices which can idle
Prepare devfreq core framework to support devices which
can idle. When device idleness is detected perhaps through
runtime-pm, need some mechanism to suspend devfreq load
monitoring and resume back when device is online. Present
code continues monitoring unless device is removed from
devfreq core.

This patch introduces following design changes,

 - use per device work instead of global work to monitor device
   load. This enables suspend/resume of device devfreq and
   reduces monitoring code complexity.
 - decouple delayed work based load monitoring logic from core
   by introducing helpers functions to be used by governors. This
   provides flexibility for governors either to use delayed work
   based monitoring functions or to implement their own mechanism.
 - devfreq core interacts with governors via events to perform
   specific actions. These events include start/stop devfreq.
   This sets ground for adding suspend/resume events.

The devfreq apis are not modified and are kept intact.

Signed-off-by: Rajagopal Venkat <rajagopal.venkat@linaro.org>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:35:04 +01:00
Daniel Lezcano
bf4d1b5ddb cpuidle: support multiple drivers
With the tegra3 and the big.LITTLE [1] new architectures, several cpus
with different characteristics (latencies and states) can co-exists on the
system.

The cpuidle framework has the limitation of handling only identical cpus.

This patch removes this limitation by introducing the multiple driver support
for cpuidle.

This option is configurable at compile time and should be enabled for the
architectures mentioned above. So there is no impact for the other platforms
if the option is disabled. The option defaults to 'n'. Note the multiple drivers
support is also compatible with the existing drivers, even if just one driver is
needed, all the cpu will be tied to this driver using an extra small chunk of
processor memory.

The multiple driver support use a per-cpu driver pointer instead of a global
variable and the accessor to this variable are done from a cpu context.

In order to keep the compatibility with the existing drivers, the function
'cpuidle_register_driver' and 'cpuidle_unregister_driver' will register
the specified driver for all the cpus.

The semantic for the output of /sys/devices/system/cpu/cpuidle/current_driver
remains the same except the driver name will be related to the current cpu.

The /sys/devices/system/cpu/cpu[0-9]/cpuidle/driver/name files are added
allowing to read the per cpu driver name.

[1] http://lwn.net/Articles/481055/

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:34:23 +01:00
Daniel Lezcano
13dd52f11a cpuidle: prepare the cpuidle core to handle multiple drivers
This patch is a preparation for the multiple cpuidle drivers support.

As the next patch will introduce the multiple drivers with the Kconfig
option and we want to keep the code clean and understandable, this patch
defines a set of functions for encapsulating some common parts and splits
what should be done under a lock from the rest.

[rjw: Modified the subject and changelog slightly.]
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:34:22 +01:00
Daniel Lezcano
4168203271 cpuidle: move driver checking within the lock section
The code is racy and the check with cpuidle_curr_driver should be
done under the lock.

I don't find a path in the different drivers where that could happen
because the arch specific drivers are written in such way it is not
possible to register a driver while it is unregistered, except maybe
in a very improbable case when "intel_idle" and "processor_idle" are
competing. One could unregister a driver, while the other one is
registering.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:34:22 +01:00
Daniel Lezcano
42f67f2aca cpuidle: move driver's refcount to cpuidle
We want to support different cpuidle drivers co-existing together.
In this case we should move the refcount to the cpuidle_driver
structure to handle several drivers at a time.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:34:22 +01:00
Daniel Lezcano
8f3e9953e1 cpuidle: fixup device.h header in cpuidle.h
The "struct device" is only used in sysfs.c.

The other .c files including the private header "cpuidle.h"
do not need to pull the entire headers tree from there as they
don't manipulate the "struct device".

This patch fixes this by moving the header inclusion to sysfs.c
and adding a forward declaration for the struct device.

The number of lines generated by the preprocesor:
Without this patch : 17269 loc
With this patch : 16446 loc

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:34:21 +01:00
Daniel Lezcano
349631e0e4 cpuidle / sysfs: move structure declaration into the sysfs.c file
The structure cpuidle_state_kobj is not used anywhere except
in the sysfs.c file. The definition of this structure is not
needed in the cpuidle header file. This patch moves it to the
sysfs.c file in order to encapsulate the code a bit more.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:34:21 +01:00
Youquan Song
c96ca4fb76 cpuidle: Get typical recent sleep interval
The function detect_repeating_patterns was not very useful for
workloads with alternating long and short pauses, for example
virtual machines handling network requests for each other (say
a web and database server).

Instead, try to find a recent sleep interval that is somewhere
between the median and the mode sleep time, by discarding outliers
to the up side and recalculating the average and standard deviation
until that is no longer required.

This should do something sane with a sleep interval series like:

	200 180 210 10000 30 1000 170 200

The current code would simply discard such a series, while the
new code will guess a typical sleep interval just shy of 200.

The original patch come from Rik van Riel <riel@redhat.com>.

Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:34:20 +01:00
Youquan Song
d73d68dc49 cpuidle: Set residency to 0 if target Cstate not enter
When cpuidle governor choose a C-state to enter for idle CPU, but it notice that
there is tasks request to be executed. So the idle CPU will not really enter
the target C-state and go to run task.

In this situation, it will use the residency of previous really entered target
C-states. Obviously, it is not reasonable.

So, this patch fix it by set the target C-state residency to 0.

Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:34:20 +01:00
Youquan Song
e11538d1f0 cpuidle: Quickly notice prediction failure in general case
The prediction for future is difficult and when the cpuidle governor prediction
fails and govenor possibly choose the shallower C-state than it should. How to
quickly notice and find the failure becomes important for power saving.

The patch extends to general case that prediction logic get a small predicted
residency, so it choose a shallow C-state though the expected residency is large
. Once the prediction will be fail, the CPU will keep staying at shallow C-state
for a long time. Acutally, the CPU has change enter into deep C-state.
So when the expected residency is long enough but governor choose a shallow
C-state, an timer will be added in order to monitor if the prediction failure.

When C-state is waken up prior to the adding timer, the timer will be cancelled
initiatively. When the timer is triggered and menu governor will quickly notice
prediction failure and re-evaluates deeper C-states possibility.

Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:34:20 +01:00
Youquan Song
69a37beabf cpuidle: Quickly notice prediction failure for repeat mode
The prediction for future is difficult and when the cpuidle governor prediction
fails and govenor possibly choose the shallower C-state than it should. How to
quickly notice and find the failure becomes important for power saving.

cpuidle menu governor has a method to predict the repeat pattern if there are 8
C-states residency which are continuous and the same or very close, so it will
predict the next C-states residency will keep same residency time.

There is a real case that turbostat utility (tools/power/x86/turbostat)
at kernel 3.3 or early. turbostat utility will read 10 registers one by one at
Sandybridge, so it will generate 10 IPIs to wake up idle CPUs. So cpuidle menu
 governor will predict it is repeat mode and there is another IPI wake up idle
 CPU soon, so it keeps idle CPU stay at C1 state even though CPU is totally
idle. However, in the turbostat, following 10 registers reading is sleep 5
seconds by default, so the idle CPU will keep at C1 for a long time though it is
 idle until break event occurs.
In a idle Sandybridge system, run "./turbostat -v", we will notice that deep
C-state dangles between "70% ~ 99%". After patched the kernel, we will notice
deep C-state stays at >99.98%.

In the patch, a timer is added when menu governor detects a repeat mode and
choose a shallow C-state. The timer is set to a time out value that greater
than predicted time, and we conclude repeat mode prediction failure if timer is
triggered. When repeat mode happens as expected, the timer is not triggered
and CPU waken up from C-states and it will cancel the timer initiatively.
When repeat mode does not happen, the timer will be time out and menu governor
will quickly notice that the repeat mode prediction fails and then re-evaluates
deeper C-states possibility.

Below is another case which will clearly show the patch much benefit:

#include <stdlib.h>
#include <stdio.h>
#include <unistd.h>
#include <signal.h>
#include <sys/time.h>
#include <time.h>
#include <pthread.h>

volatile int * shutdown;
volatile long * count;
int delay = 20;
int loop = 8;

void usage(void)
{
	fprintf(stderr,
		"Usage: idle_predict [options]\n"
		"  --help	-h  Print this help\n"
		"  --thread	-n  Thread number\n"
		"  --loop     	-l  Loop times in shallow Cstate\n"
		"  --delay	-t  Sleep time (uS)in shallow Cstate\n");
}

void *simple_loop() {
	int idle_num = 1;
	while (!(*shutdown)) {
		*count = *count + 1;

		if (idle_num % loop)
			usleep(delay);
		else {
			/* sleep 1 second */
			usleep(1000000);
			idle_num = 0;
		}
		idle_num++;
	}

}

static void sighand(int sig)
{
	*shutdown = 1;
}

int main(int argc, char *argv[])
{
	sigset_t sigset;
	int signum = SIGALRM;
	int i, c, er = 0, thread_num = 8;
	pthread_t pt[1024];

	static char optstr[] = "n:l:t:h:";

	while ((c = getopt(argc, argv, optstr)) != EOF)
		switch (c) {
			case 'n':
				thread_num = atoi(optarg);
				break;
			case 'l':
				loop = atoi(optarg);
				break;
			case 't':
				delay = atoi(optarg);
				break;
			case 'h':
			default:
				usage();
				exit(1);
		}

	printf("thread=%d,loop=%d,delay=%d\n",thread_num,loop,delay);
	count = malloc(sizeof(long));
	shutdown = malloc(sizeof(int));
	*count = 0;
	*shutdown = 0;

	sigemptyset(&sigset);
	sigaddset(&sigset, signum);
	sigprocmask (SIG_BLOCK, &sigset, NULL);
	signal(SIGINT, sighand);
	signal(SIGTERM, sighand);

	for(i = 0; i < thread_num ; i++)
		pthread_create(&pt[i], NULL, simple_loop, NULL);

	for (i = 0; i < thread_num; i++)
		pthread_join(pt[i], NULL);

	exit(0);
}

Get powertop V2 from git://github.com/fenrus75/powertop, build powertop.
After build the above test application, then run it.
Test plaform can be Intel Sandybridge or other recent platforms.
#./idle_predict -l 10 &
#./powertop

We will find that deep C-state will dangle between 40%~100% and much time spent
on C1 state. It is because menu governor wrongly predict that repeat mode
is kept, so it will choose the C1 shallow C-state even though it has chance to
sleep 1 second in deep C-state.

While after patched the kernel, we find that deep C-state will keep >99.6%.

Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:34:19 +01:00
Daniel Lezcano
e45a00d679 cpuidle / sysfs: move kobj initialization in the syfs file
Move the kobj initialization and completion in the sysfs.c
and encapsulate the code more.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:34:19 +01:00
Daniel Lezcano
1aef40e288 cpuidle / sysfs: change function parameter
The function needs the cpuidle_device which is initially passed to the
caller.

The current code gets the struct device from the struct cpuidle_device,
pass it the cpuidle_add_sysfs function. This function calls
per_cpu(cpuidle_devices, cpu) to get the cpuidle_device.

This patch pass the cpuidle_device instead and simplify the code.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:34:19 +01:00
Jingoo Han
f55c9c2627 cpufreq: Remove unnecessary initialization of a local variable
Remove an unnecessary initializer for the 'ret' variable in
__cpufreq_set_policy().

[rjw: Modified the subject and changelog slightly.]
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:33:09 +01:00
Viresh Kumar
7249924e53 cpufreq: Make sure target freq is within limits
__cpufreq_driver_target() must not pass target frequency beyond the
limits of current policy.

Today most of cpufreq platform drivers are doing this check in their
target routines. Why not move it to __cpufreq_driver_target()?

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:33:09 +01:00
Viresh Kumar
5a1c022850 cpufreq: Avoid calling cpufreq driver's target() routine if target_freq == policy->cur
Avoid calling cpufreq driver's target() routine if new frequency is same as
policies current frequency.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:33:09 +01:00
Viresh Kumar
da58445570 cpufreq: Fix sparse warning by making local function static
cpufreq_disabled() is a local function, so should be marked static.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:33:08 +01:00
Viresh Kumar
1e7586a18a cpufreq: Fix sparse warnings by updating cputime64_t to u64
There were few sparse warnings due to mismatch of type on function arguments.
Two types were used u64 and cputime64_t. Both are actually u64, so use u64 only.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:33:08 +01:00
Viresh Kumar
4471a34f9a cpufreq: governors: remove redundant code
Initially ondemand governor was written and then using its code conservative
governor is written. It used a lot of code from ondemand governor, but copy of
code was created instead of using the same routines from both governors. Which
increased code redundancy, which is difficult to manage.

This patch is an attempt to move common part of both the governors to
cpufreq_governor.c file to come over above mentioned issues.

This shouldn't change anything from functionality point of view.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:33:07 +01:00
Viresh Kumar
0676f7f2e7 cpufreq: return early from __cpufreq_driver_getavg()
There is no need to do cpufreq_get_cpu() and cpufreq_put_cpu() for drivers that
don't support getavg() routine.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:33:07 +01:00
Andreas Schwab
8636fd280e cpufreq: fix jiffies/cputime mixup in conservative/ondemand governors
The function get_cpu_idle_time_jiffy in both the conservative and
ondemand governors use jiffies_to_usecs to convert a cputime value to
usecs which gives the wrong value on architectures where cputime and
jiffies use different units.  Only matters if NO_HZ is disabled, since
otherwise get_cpu_idle_time_us should already return a valid value, and
get_cpu_idle_time_jiffy isn't actually called.

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:33:07 +01:00
Viresh Kumar
db7011516c cpufreq: Improve debug prints
With debug options on, it is difficult to locate cpufreq core's debug prints.
Fix this by prefixing debug prints with KBUILD_MODNAME.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:33:06 +01:00
viresh kumar
2aacdfff9c cpufreq: Move common part from governors to separate file, v2
Multiple cpufreq governers have defined similar get_cpu_idle_time_***()
routines. These routines must be moved to some common place, so that all
governors can use them.

So moving them to cpufreq_governor.c, which seems to be a better place for
keeping these routines.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:33:06 +01:00
viresh kumar
4b972f0b04 cpufreq / core: Fix printing of governor and driver name
Arrays for governer and driver name are of size CPUFREQ_NAME_LEN or 16.
i.e. 15 bytes for name and 1 for trailing '\0'.

When cpufreq driver print these names (for sysfs), it includes '\n' or ' ' in
the fmt string and still passes length as CPUFREQ_NAME_LEN. If the driver or
governor names are using all 15 fields allocated to them, then the trailing '\n'
or ' ' will never be printed. And so commands like:

root@linaro-developer# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_driver

will print something like:

cpufreq_foodrvroot@linaro-developer#

Fix this by increasing print length by one character.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:33:06 +01:00
viresh kumar
8bf1ac7236 cpufreq / core: Fix typo in comment describing show_bios_limit()
show_bios_limit is mistakenly written as show_scaling_driver in a comment
describing purpose of show_bios_limit() routine.

Fix it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:33:05 +01:00
Bob Moore
a19ec8a607 ACPICA: Update version to 20121018
Version 20121018.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:31:30 +01:00
Bob Moore
413fc3f592 ACPICA: AcpiGetObjectInfo: Add support for ACPI 5 _SUB method
Now calls _SUB in addition to the other ID methods: _HID, _CID,
and _UID.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:31:30 +01:00
Bob Moore
17b1f45a68 ACPICA: Update for 64-bit generation of recent error message changes
Fix for errors on printf changes on 64-bit platforms and gcc.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:31:30 +01:00
Bob Moore
47abd13ccf ACPICA: Fix externalize name to complete migration to ACPI_MOVE_NAME
Fix for name segment copy and validation.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:31:29 +01:00
Bob Moore
97171c6be3 ACPICA: Add starting offset parameter to common dump buffer routine
Rename the dump buffer routines. Offset parameter can specify the
buffer starting offset that is used when displaying each line of
the buffer.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:31:29 +01:00
Bob Moore
eed9525ac4 ACPICA: Deploy ACPI_MOVE_NAME across ACPICA source base
Replaces instances of strncpy(...,4) for ACPI_NAMEs.
ACPI_MOVE_NAME optimizes these to a single 32-bit copy on machines
that support misaligned transfers.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:31:29 +01:00
Bob Moore
2d2dd50880 ACPICA: Update support for ACPI 5 MPST table
Fixes some problems introduced by late changes to the table as it
was added to the ACPI 5.0 specification.  Both the table compiler
and the disassembler and the main header support for the table.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:31:28 +01:00
Bob Moore
00eb32550f ACPICA: Enhance error reporting for invalid opcodes and bad ACPI_NAMEs
For disassembler, dump the 48 bytes surrounding the invalid
opcode.  Fix incorrect table offset reported for invalid opcodes.
Report original 32-bit value for bad ACPI_NAMEs.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:31:28 +01:00
Bob Moore
ff60027174 ACPICA: Add ACPI_MOVE_NAME macro to optimize 4-byte ACPI_NAME copies
Resolves to a 32-bit move for the normal case, strncpy on machines
that do not support misaligned transfers.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:31:28 +01:00
Bob Moore
d8da9151bb ACPICA: AcpiExec: Improve algorithm for tracking memory leaks
Add some intelligence to the code that maintains the global
list of allocated memory. The list is now ordered by allocated
memory address, significantly improving performance.  When running
AcpiExec on the ASLTS test suite, speed improvements of 3X to 5X
are seen, depending on the platform and/or the environment.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:31:27 +01:00