Commit graph

361,345 commits

Author SHA1 Message Date
Ralf Baechle
225ae5fd9a MIPS: Malta: Fix interupt number of CBUS UART.
The CBUS UART's interrupt number was wrong conflicting with the interrupt
being tied to the Intel PIIX4.  Since the PIIX4's interrupt is registered
before the CBUS UART which is not being used on most systems this would
not be noticed.

Attempts to open the ttyS2 CBUS UART would result in:

genirq: Flags mismatch irq 18. 00000000 (serial) vs. 00010000 (XT-PIC cascade)
serial_link_irq_chain: request failed: -16 for irq: 18

Qemu was written to match the kernel so will need to be fixed also.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-11-13 14:50:15 +01:00
Maciej Patelczyk
49bd665c54 [SCSI] isci: copy fis 0x34 response into proper buffer
SATA MICROCODE DOWNALOAD fails on isci driver. After receiving Register
Device to Host (FIS 0x34) frame Initiator resets phy.
In the frame handler routine response (FIS 0x34) was copied into wrong
buffer and upper layer did not receive any answer which resulted in
timeout and reset.
This patch corrects this bug.

Signed-off-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-11-13 13:45:14 +00:00
Shan Wei
f7c83bcbfa net: xfrm: use __this_cpu_read per-cpu helper
this_cpu_ptr/this_cpu_read is faster than per_cpu_ptr(p, smp_processor_id())
and can reduce  memory accesses.
The latter helper needs to find the offset for current cpu,
and needs more assembler instructions which objdump shows in following.

this_cpu_ptr relocates and address. this_cpu_read() relocates the address
and performs the fetch. this_cpu_read() saves you more instructions
since it can do the relocation and the fetch in one instruction.

per_cpu_ptr(p, smp_processor_id()):
  1e:   65 8b 04 25 00 00 00 00         mov    %gs:0x0,%eax
  26:   48 98                           cltq
  28:   31 f6                           xor    %esi,%esi
  2a:   48 c7 c7 00 00 00 00            mov    $0x0,%rdi
  31:   48 8b 04 c5 00 00 00 00         mov    0x0(,%rax,8),%rax
  39:   c7 44 10 04 14 00 00 00         movl   $0x14,0x4(%rax,%rdx,1)

this_cpu_ptr(p)
  1e:   65 48 03 14 25 00 00 00 00      add    %gs:0x0,%rdx
  27:   31 f6                           xor    %esi,%esi
  29:   c7 42 04 14 00 00 00            movl   $0x14,0x4(%rdx)
  30:   48 c7 c7 00 00 00 00            mov    $0x0,%rdi

Signed-off-by: Shan Wei <davidshan@tencent.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2012-11-13 14:38:52 +01:00
Mauro Carvalho Chehab
6ee28d94c9 [media] siano: fix build with allmodconfig
As reported by Stephen:

	After merging the v4l-dvb tree, today's linux-next build (x86_64
	allmodconfig) failed like this:

	ERROR: "sms_ir_exit" [drivers/media/common/siano/smsmdtv.ko] undefined!
	ERROR: "sms_ir_event" [drivers/media/common/siano/smsmdtv.ko] undefined!
	ERROR: "sms_ir_init" [drivers/media/common/siano/smsmdtv.ko] undefined!

The smsir file should be part of the smsmdtv core, if RC is defined.
Fix it.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-13 11:15:38 -02:00
Arnd Bergmann
97b129be91 Merge branch 'soc4' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc2
Its a little embarrassing, but they all fix problems introduced
in previous pull-requests for 3.8 that have been merged.

* The three Revert patches back-out secondary CPU initialisation
  changes from Bastian Hecht which he as advised me are incorrect
  and break secondary CPU initialisation.

* The clkfwk patch from Morimoto-san resolves a build warning.

* 'soc4' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  sh: clkfwk: fixup unsed variable warning
  Revert "ARM: shmobile: r8a7779: Replace modify_scu_cpu_psr with scu_power_mode"
  Revert "ARM: shmobile: sh73a0: Replace modify_scu_cpu_psr with scu_power_mode"
  Revert "ARM: shmobile: emev2: Replace modify_scu_cpu_psr with scu_power_mode"

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-11-13 13:48:02 +01:00
Florian Westphal
d3976a53ce netfilter: ipv6: only provide sk_bound_dev_if for link-local addr
yoshfuji points out that sk_bound_dev_if should only be provided
for link-local addresses.

IPv6 getpeer/sockname also has this test, i.e. we will now
only set sin6_scope_id if the original(!) destination
was a link-local address.

Reported-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-11-13 13:42:29 +01:00
Matt Fleming
89d16665d3 efivarfs: Use query_variable_info() to limit kmalloc()
We don't want someone who can write EFI variables to be able to
allocate arbitrarily large amounts of memory, so cap it to something
sensible like the amount of free space for EFI variables.

Acked-by: Jeremy Kerr <jeremy.kerr@canonical.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2012-11-13 12:33:21 +00:00
Jani Nikula
2f4f649a69 drm/i915: do not ignore eDP bpc settings from vbt
There are laptops out there that need the eDP bpc from VBT. This is
effectively a revert of

commit 4344b813f1
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Fri Aug 10 11:10:20 2012 +0200

    drm/i915: ignore eDP bpc settings from vbt

but putting the VBT check after the EDID check to see them both in dmesg if
this clamps more than the EDID. We have enough history with bpc clamping to
warrant the extra debug info.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47641
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56401
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-13 13:15:42 +01:00
Nicolas Pitre
9ecb47de34 ARM: 7574/1: kernel/process.c: include idmap.h instead of redeclaring setup_mm_for_reboot()
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-11-13 11:47:41 +00:00
Nicolas Pitre
e40678559f ARM: 7573/1: idmap: use flush_cache_louis() and flush TLBs only when necessary
Flushing the cache is needed for the hardware to see the idmap table
and therefore can be done at init time.  On ARMv7 it is not necessary to
flush L2 so flush_cache_louis() is used here instead.

There is no point flushing the cache in setup_mm_for_reboot() as the
caller should, and already is, taking care of this.  If switching the
memory map requires a cache flush, then cpu_switch_mm() already includes
that operation.

What is not done by cpu_switch_mm() on ASID capable CPUs is TLB flushing
as the whole point of the ASID is to tag the TLBs and avoid flushing them
on a context switch.  Since we don't have a clean ASID for the identity
mapping, we need to flush the TLB explicitly in that case.  Otherwise
this is already performed by cpu_switch_mm().

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-11-13 11:47:41 +00:00
Shawn Guo
b62655f4c6 ARM: 7571/1: SMP: add function arch_send_wakeup_ipi_mask()
Add function arch_send_wakeup_ipi_mask(), so that platform code can
use it as an easy way to wake up cores that are in WFI.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-11-13 11:47:40 +00:00
Thierry Reding
970d494c32 i2c: ocores: Use devm_request_and_ioremap()
Replacing the devm_request_mem_region() and devm_ioremap_nocache() calls
by a single call to devm_request_and_ioremap() simplifies the code.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-11-13 12:16:24 +01:00
Wolfram Sang
45fd5e4ad2 i2c: rcar: fix section mismatch
Give the driver struct a name according to the 'standard' to fix:

WARNING: vmlinux.o(.data+0x11798): Section mismatch in reference from the variable rcar_i2c_drv to the function .devinit.text:rcar_i2c_probe()
...
WARNING: vmlinux.o(.data+0x1179c): Section mismatch in reference from the variable rcar_i2c_drv to the function .devexit.text:rcar_i2c_remove()

Reported-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
2012-11-13 11:24:15 +01:00
Heiko Carstens
4bffbb3455 s390/mm: have 16 byte aligned struct pages
Select HAVE_ALIGNED_STRUCT_PAGE on s390, so that the slub allocator can make
use of compare and swap double for lockless updates. This increases the size
of struct page to 64 bytes (instead of 56 bytes), however the performance gain
justifies the increased size:

- now excactly four struct pages fit into a single cache line; the
  case that accessing a struct page causes two cache line loads
  does not exist anymore.
- calculating the offset of a struct page within the memmap array
  is only a simple shift instead of a more expensive multiplication.

A "hackbench 200 process 200" run on a 32 cpu system did show an 8% runtime
improvement.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-13 11:03:09 +01:00
Heiko Carstens
516bad44b9 s390/gup: fix access_ok() usage in __get_user_pages_fast()
access_ok() returns always "true" on s390. Therefore all access_ok()
invocations are rather pointless.
However when walking page tables we need to make sure that everything
is within bounds of the ASCE limit of the task's address space.
So remove the access_ok() call and add the same check we have in
get_user_pages_fast().

Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-13 11:02:28 +01:00
Heiko Carstens
d55c4c613f s390/gup: add missing TASK_SIZE check to get_user_pages_fast()
When walking page tables we need to make sure that everything
is within bounds of the ASCE limit of the task's address space.
Otherwise we might calculate e.g. a pud pointer which is not
within a pud and dereference it.
So check against TASK_SIZE (which is the ASCE limit) before
walking page tables.

Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-13 11:02:26 +01:00
Bob Peterson
4327a9bf71 GFS2: Eliminate redundant buffer_head manipulation in gfs2_unlink_inode
Since we now have a dirty_inode that takes care of manipulating the
inode buffer and writing from the inode to the buffer, we can
eliminate some unnecessary buffer manipulations in gfs2_unlink_inode
that are now redundant.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-11-13 09:55:26 +00:00
Bob Peterson
343cd8f0d7 GFS2: Use dirty_inode in gfs2_dir_add
This patch changes the gfs2_dir_add function so that it uses
the dirty_inode function (via mark_inode_dirty) rather than manually
updating the dinode.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-11-13 09:54:54 +00:00
Steven Whitehouse
fa731fc4e0 GFS2: Fix truncation of journaled data files
This patch fixes an issue relating to not having enough revokes
available when truncating journaled data files. In order to ensure
that we do no run out, the truncation is broken into separate pieces
if it is large enough.

Tested using fsx on a journaled data file.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-11-13 09:50:28 +00:00
Arnd Bergmann
b5932cc839 Merge branch 'cleanups/dma' into next/cleanup
Separate patches from Marek Szyprowski <m.szyprowski@samsung.com>:

Commit e9da6e9905 ("ARM: dma-mapping: remove custom consistent dma
region") replaced custom consistent memory handling, so setting
consistent dma memory size is not longer required. This patch series
cleans sub-architecture platform code to remove all calls to the
obsolated init_consistent_dma_size() function and finally removes the
init_consistent_dma_size() stub itself.

* cleanups/dma:
  ARM: at91: remove obsoleted init_consistent_dma_size()
  ARM: u300: remove obsoleted init_consistent_dma_size()
  ARM: dma-mapping: remove init_consistent_dma_size() stub
  ARM: shmobile: remove obsoleted init_consistent_dma_size()
  ARM: davinci: remove obsoleted init_consistent_dma_size()
  ARM: samsung: remove obsoleted init_consistent_dma_size()

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-11-13 10:14:38 +01:00
Marek Szyprowski
16cf8a80a8 ARM: dma-mapping: remove init_consistent_dma_size() stub
Since commit e9da6e9905 ("ARM: dma-mapping: remove custom consistent
dma region") setting consistent dma memory size is not longer required. All
calls to this function has been already removed, so the
init_consistent_dma_size() stub can also be gone.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-11-13 10:13:23 +01:00
Marek Szyprowski
f02dfada8b ARM: at91: remove obsoleted init_consistent_dma_size()
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
CC: Nicolas Ferre <nicolas.ferre@atmel.com>
CC: Andrew Victor <linux@maxim.org.za>
2012-11-13 10:13:22 +01:00
Marek Szyprowski
f014335f6a ARM: u300: remove obsoleted init_consistent_dma_size()
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-13 10:13:22 +01:00
Marek Szyprowski
86819521d6 ARM: shmobile: remove obsoleted init_consistent_dma_size()
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
CC: Paul Mundt <lethal@linux-sh.org>
CC: Magnus Damm <magnus.damm@gmail.com>
2012-11-13 10:13:21 +01:00
Marek Szyprowski
915d6cfab3 ARM: davinci: remove obsoleted init_consistent_dma_size()
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
CC: Sekhar Nori <nsekhar@ti.com>
CC: Kevin Hilman <khilman@ti.com>
2012-11-13 10:13:20 +01:00
Marek Szyprowski
5f985cf1c1 ARM: samsung: remove obsoleted init_consistent_dma_size()
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-13 10:13:12 +01:00
Martin Schwenke
1762a59d8e ALSA: usb-audio: Add quirk for Focusrite Scarlett 18i6
Probing this device currently fails in snd_usb_audio_probe() because
the call to snd_usb_create_mixer() fails.  This is due to unknown or
non-standard interface descriptor subtypes in parse_audio_unit():

  usbaudio: unit 51: unexpected type 0x09
  snd-usb-audio: probe of 1-8:1.0 failed with error -5

Some people are working around this by recompiling usb-audio with the
call to snd_usb_create_mixer() commented out.  It would be nice to
avoid that.

While the best idea would be to look into the mixer creation failure,
a reasonable short-term solution is to use quirks to only probe the
trouble-free interfaces.  This allows audio and MIDI interfaces to be
used without any obvious issues.

Interface 0 is the main one to ignore.  It contains lots of
control-fu, including the unexpected interface descriptor subtypes.
Interface 5 is for firmware updates and I'm not sure how to get
support for this.  Interface 3 is some sort of control interface that
I don't understand:

    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        3
      bAlternateSetting       0
      bNumEndpoints           0
      bInterfaceClass         1 Audio
      bInterfaceSubClass      1 Control Device
      bInterfaceProtocol      0
      iInterface              0
      AudioControl Interface Descriptor:
        bLength                 9
        bDescriptorType        36
        bDescriptorSubtype      1 (HEADER)
        bcdADC               1.00
        wTotalLength            9
        bInCollection           1
        baInterfaceNr( 0)       1

Signed-off-by: Martin Schwenke <martin@meltin.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-13 09:47:13 +01:00
Kuninori Morimoto
b53f4baf8b i2c: rcar: used devm_request_and_ioremap() instead of devm_ioremap()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-11-13 09:27:28 +01:00
Steffen Klassert
703fb94ec5 xfrm: Fix the gc threshold value for ipv4
The xfrm gc threshold value depends on ip_rt_max_size. This
value was set to INT_MAX with the routing cache removal patch,
so we start doing garbage collecting when we have INT_MAX/2
IPsec routes cached. Fix this by going back to the static
threshold of 1024 routes.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2012-11-13 09:15:07 +01:00
Tomi Valkeinen
966458f89d OMAP: remove vram allocator
OMAP specific vram allocator is no longer in use, and we can remove all
the vram code.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-13 09:52:41 +02:00
Tomi Valkeinen
b022e17b1c OMAP: common.c: remove init call to vram
OMAP specific vram allocator is no longer used, and we can remove init
call to the vram allocator.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
2012-11-13 09:52:36 +02:00
Tomi Valkeinen
e8ead7b50d OMAP: RX51: remove use of vram
As omapfb no longer uses omap specific vram allocator we can remove the
vram pre-allocation from rx51 board file.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
2012-11-13 09:52:29 +02:00
Tomi Valkeinen
0049fb2603 OMAPFB: use dma_alloc_attrs to allocate memory
Use dma_alloc_attrs to allocate memory instead of omap specific vram
allocator. After this we can remove the omap vram allocator.

There are some downsides to this change:

1) dma_alloc_attrs doesn't let us allocate at certain physical address.
However, this should not be a problem as this feature of vram allocator
is only used when reserving the framebuffer that was initialized by the
bootloader, and we don't currently support "passing" a framebuffer from
the bootloader to the kernel anyway.

2) dma_alloc_attrs, as of now, always ioremaps the allocated area, and
we don't need the ioremap when using VRFB. This patch uses
DMA_ATTR_NO_KERNEL_MAPPING for the allocation, but the flag is currently
not operational.

3) OMAPFB_GET_VRAM_INFO ioctl cannot return real values anymore. I
changed the ioctl to return 64M for all the values, which, I hope, the
applications will interpret as "there's enough vram".

4) "vram" kernel parameter to define how much ram to reserve for video
use no longer works. The user needs to enable CMA and use "cma"
parameter.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-13 09:52:24 +02:00
Dan Carpenter
d2153a1595 ALSA: es1968: precedence bug in snd_es1968_tea575x_get_pins()
I don't think this works as intended.  '|' higher precedence than ?: so
the bitwize OR "0 | (val & STR_MOST)" is a no-op.

I have re-written it to be more clear.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-13 08:51:47 +01:00
Tomi Valkeinen
3f5ba55e8f OMAP: FB: use DMA_BIT_MASK() for fb's coherent_dma_mask
Use DMA_BIT_MASK() for fb's coherent_dma_mask for clarity.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
2012-11-13 09:51:42 +02:00
Frank Li
f8a9f757cb regulator: gpio-regulator: fix can't find regulator node in dt
Need initilize of_node in regulator config when register regulator,
otherwise regulator driver think it is no-dt device.

in regulator_dev_lookup
list_for_each_entry(r, &regulator_list, list)
	if (r->dev.parent &&
		node == r->dev.of_node)
			return r

r->dev.of_noe will be zero if miss config in cfg.

Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-13 16:35:57 +09:00
Frank Li
dea05fe66e regulator: gpio-regulator: doc: Fix wrong key gpio-enable
Wrong description in binding document.
Doc use "gpio-enable", but code use "enable-gpio"

In drivers/regulator/gpio-regulator.c
	config->enable_gpio = of_get_named_gpio(np, "enable-gpio", 0);

Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-13 16:35:57 +09:00
Laxman Dewangan
1a0bb679bc regulator: tps80031: add regulator driver for tps80031
Add regulator driver for Texas Instrument TPS80031/TPS80032 device.
TPS80031/ TPS80032 Fully Integrated Power Management with Power
Path and Battery Charger. It has 5 configurable step-down
converters, 11 general purpose LDOs, VBUS generator and digital
output to control regulators.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-13 15:57:39 +09:00
Takashi Iwai
6214b54cbf ASoC: Fixes for v3.7
A few small fixes plus a large but simple change for WM5102 which writes
 out a bunch of register updates to the device when we enable the clock
 as recommended following chip evaluation.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQoeX6AAoJELSic+t+oim9Yg8P/j49T5obxIXTZNMmMjrdc//f
 xM61/gLoRfVtY2deHdAzpUw6OSUOCQ0iVuasQalmnz2KNb/htzXXT+npjwPo93ok
 QZ4NBiMVJdOj/8m2u64K7flcGv2/llj2kvrj+8HmAI7KZ++zXMbBPVmvCSz0NpBL
 tFyd4zQ5Fp7n4MCDiQ7fRKwgUbbkwuW4jm/R4YEJS0tOrEgy0vG4MP/v8oEYcu/f
 tsOo0cMo8yESwpsy+fzfzqw7WS8LW/nKJJkRkYkO96YvgpDKbiPHadTJZDZ/+vg4
 uDpNOcLP2t7cRV5kh0fIQpjPYxtDFeV9HCua/2NcDwSRbIn2gd4/vP08q8iZeZK7
 F7c7VCZs9LgWnur0+RxS/yvlQJD0hmFEnaYobMXsULTZs4cRceigkBWOBSThG19y
 iCxRdy0XLaog4yTHb5Aql0szAQ8PkxdtOP7JoyF0nUQn9hwinISWtgyxfHzHXWKb
 SZHh2RLyzyyBWDh8VVBr4VM6q6WbQzS5MzS1IHipphoMGuGRKwQ5huPb048XjThB
 w1suZvX8aMw1vJy2au/d38P4891c9qUBA4woNqd1r+xrYOBAw8VPw7c5CxCyBgIg
 RUuCjEy/4RTkiXrhKzJA0kHmLXJKb53i2yNtzwe+w1lG6zdnhqGIuuHqLmdm89fL
 qgm/dUv6FIXhkMxtYz0+
 =3xEm
 -----END PGP SIGNATURE-----

Merge tag 'asoc-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v3.7

A few small fixes plus a large but simple change for WM5102 which writes
out a bunch of register updates to the device when we enable the clock
as recommended following chip evaluation.
2012-11-13 07:48:07 +01:00
Daniel Mack
5574f77454 ASoC: cs4271: free allocated GPIO
In case of probe deferral, the allocated GPIO line is not freed, which
prevents it from being claimed and properly asserted in later attempts.

Fix this by using devm_gpio_request().

Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-by: Michael Hirsch <hirsch@teufel.de>
Cc: Alexander Sverdlin <subaparts@yandex.ru>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-13 15:45:35 +09:00
Mark Brown
ba027da8eb Merge branches 'fix/arizona', 'fix/core', 'fix/cs42l52', 'fix/mxs', 'fix/samsung' and 'fix/wm8978' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into tmp 2012-11-13 15:13:29 +09:00
Darrick J. Wong
c6af8803cd ext4: don't verify checksums of dx non-leaf nodes during fallback scan
During a directory entry lookup of a hashed directory, if the
hash-based lookup functions fail and we fall back to a linear scan,
don't try to verify the dirent checksum on the internal nodes of the
hash tree because they don't store a checksum in a hidden dirent like
the leaf nodes do.

Reported-by: George Spelvin <linux@horizon.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-11-12 23:51:02 -05:00
Kuninori Morimoto
94091c6b94 sh: clkfwk: fixup unsed variable warning
This patch solves above warning

${LINUX}/drivers/sh/clk/cpg.c:404:6: warning: \
unused variable 'val' [-Wunused-variable]

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2012-11-13 11:45:40 +09:00
Simon Horman
872b59832d Revert "ARM: shmobile: r8a7779: Replace modify_scu_cpu_psr with scu_power_mode"
This reverts commit cdc7594e5c.

The code changes the flags of the wrong cpus - which breaks the whole
bootup of secondary CPUs.

Cc: Bastian Hecht <hechtb@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2012-11-13 11:42:54 +09:00
Simon Horman
d5bea23c82 Revert "ARM: shmobile: sh73a0: Replace modify_scu_cpu_psr with scu_power_mode"
This reverts commit e721295185.

The code changes the flags of the wrong cpus - which breaks the whole
bootup of secondary CPUs.

Cc: Bastian Hecht <hechtb@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2012-11-13 11:42:28 +09:00
Simon Horman
40937f7460 Revert "ARM: shmobile: emev2: Replace modify_scu_cpu_psr with scu_power_mode"
This reverts commit 865d90f803.

The code changes the flags of the wrong cpus - which breaks the whole
bootup of secondary CPUs.

Cc: Bastian Hecht <hechtb@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2012-11-13 11:41:09 +09:00
Mike Turquette
f9ae32a74f ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts
Clean all #ifdef's added to common clock code.  This code is no longer
needed due to migration to the common clock framework.

Signed-off-by: Mike Turquette <mturquette@ti.com>
[paul@pwsan.com: clean up new ifdefs added in clockdomain.c]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-11-12 19:18:51 -07:00
Paul Walmsley
f51e0f9862 ARM: OMAP2xxx: clock: drop obsolete clock data
Drop the now-obsolete OMAP2420/2430 original OMAP clock data.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Mike Turquette <mturquette@ti.com>
2012-11-12 19:18:51 -07:00
Rajendra Nayak
d037e100d1 ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts
Clean all #ifdef's added to OMAP2 clock code to make it COMMON clk
ready, not that CONFIG_COMMON_CLK is enabled.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
[paul@pwsan.com: also drop CONFIG_COMMON_CLK tests around APLL recalc_rate
 functions]
Signed-off-by: Mike Turquette <mturquette@ti.com>
[paul@pwsan.com: remove some ifdefs in mach-omap2/io.c]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-11-12 19:18:51 -07:00
Paul Walmsley
455db9c9b2 ARM: OMAP3+: DPLL: drop !CONFIG_COMMON_CLK sections
Remove all of the code that is compiled when CONFIG_COMMON_CLK=n in the
OMAP3+ DPLL handling code.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Mike Turquette <mturquette@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
2012-11-12 19:18:50 -07:00