This patch adds support for the AD5415, AD5426, AD5429, AD5432, AD5439, AD5443
and AD5449 single and dual channel DACs.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
For ADCs or DACs the denominator for fractional types often is a power of two.
In this case we can use a shift operation instead of the rather expensive 64 bit
division. This patch adds a new fractional type which expects the denominator to
be specified as the log2 of the actual denominator. E.g. for ADCs and DACs this
will usually be the number of significant bits.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
strict_strto* has been deprecated in favor of kstrto*. Use strict_strtouint
respective strict_strtoint, since that is what the functions we pass the
converted values to expect.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add the following system calls to the syscall table:
fallocate
sendmmsg
umount2
syncfs
epoll_create1
inotify_init1
signalfd4
dup3
pipe2
timerfd_create
timerfd_settime
timerfd_gettime
eventfd2
preadv
pwritev
fanotify_init
fanotify_mark
process_vm_readv
process_vm_writev
name_to_handle_at
open_by_handle_at
sync_file_range
perf_event_open
rt_tgsigqueueinfo
clock_adjtime
prlimit64
kcmp
Note that we have to use the 'sys_sync_file_range2' version, so that
the 64-bit arguments are aligned correctly to the argument registers.
Signed-off-by: Chris Zankel <chris@zankel.net>
Use dev_kcalloc instead of devm_kzalloc to allocate arrays since it is
semantically more appropriate.
While we are at it the patch also fixes the following coccinelle warning:
drivers/iio/adc/at91_adc.c:277:25-31: ERROR: application of sizeof to pointer
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-By: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Single-threaded forcewake was only used on some early pre-production
ivybridge machines, all the latest ones should use mt forcewake. And
we already assume this in other places of the code (e.g. DERRMR
support in the ddx, or the latest intel_gt_reset patch to reset any
lingering forcewake references left behind by the bios), so don't
bother here, too.
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fix two compiler warnings complaining about truncating a value on
a 64-bit host, and about declaring an unused variable that is only
used for a specific configuration.
Signed-off-by: Chris Zankel <chris@zankel.net>
This patch does two things:
* Use macb struct members and remove at91_ether ones
* Alloc DMA buffers on netdev start and dealloc on stop
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
This rips out the at91_ether phy handling and ethtool stuff
and replace it with equivalent stuff from macb.
The only thing lost is the phy irq support from at91_ether,
but this can be added to macb and then benefit all users.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
This will make it easier to share code between the drivers and
eventually merge them into one driver.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Use register and bits definitions from the macb header. This makes it
possible to have one header file for this hardware.
Process was scripted and the resulting object file has the same checksum.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
This adds product names (that most users know) to Kconfig and board
comments.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
schedule_tail() requires that the 'prev' task be passed as an argument
to it. This arg is set in _switch, just before 'returning' to one of
the ret_* functions where schedule_tail is invoked.
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Linus deleted the old code and put signing on the install command,
I fixed it to extract the keyid and signer-name within sign-file
and cleaned up that script now it always signs in-place.
Some enthusiast should convert sign-key to perl and pull
x509keyid into it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes the following warnings from coccicheck:
drivers/iio/inkern.c:81:6-14: WARNING: Comparison to bool
drivers/iio/dac/ad5686.c:191:5-11: WARNING: Comparison to bool
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Fixes the following error from coccicheck:
drivers/staging/iio/adc/lpc32xx_adc.c:153:43-46: ERROR: Missing resource_size with res
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The temperature channel has a calibbias attribute which it should not have, but
the offset attribute is missing.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Temperature scale and offset differ between the different devices supported by
this driver. Right now the driver always reports the temperature scale and
offset of the adis16400 regardless of which chip variant is used. This patch
adds two new attributes to the chip_info struct, one for the temperature scale
and one for the temperature offset.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Most of the channel offsets and scales in the adis16400 are incorrect:
* Voltage scale is off by a factor of 1000
* Temperature scale is off by a factor of 1000
* Temperature offset is completely wrong
* Some of the acceleration scales are either completely wrong or have the
wrong unit
* Some of the angular velocity scale are either completely wrong or have
the wrong unit
This patch fixes these issues. For consistency it also converts scales which are
correct to use the IIO_G_TO_M_S_2 and IIO_DEGREE_TO_RAD macro. This makes it
much easier to compare it to the value given in the datasheet.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Most of the channel offsets and scales in the adis16260 are incorrect:
* Temperature scale is off by a factor of 1000
* Voltage scale is off by a factor of 1000
* Temperature offset is completely wrong
This patch fixes these issues. Also use the IIO_DEGREE_TO_RAD for the angle
velocity since this makes it much easier to compare it to the value given in the
datasheet.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Most of the channel offsets and scales in the adis16240 are incorrect:
* Temperature scale is of by a factor of 1000
* Voltage scale is of by a factor of 1000
* Temperature offset is completely wrong
* Peak scale is completely wrong
This patch fixes these issues. Also use the IIO_G_TO_M_S_2 macro for the
acceleration scale since this makes it much easier to compare it to the value
given in the datasheet.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Most of the channel offsets and scales in the adis16220 are incorrect:
* Temperature scale is off by a factor of 1000
* Voltage scale is off by a factor of 1000
* Acceleration seems to have a typo "187042" since it should be instead of
"1887042"
* Temperature offset is completely wrong
This patch fixes these issues.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Most of the channel offsets and scales in the adis16209 are incorrect:
* Temperature scale is of by a factor of 1000
* Voltage scale is of by a factor of 1000
* Temperature offset is completely wrong
* Rotational position scale is missing
This patch fixes these issues. Also use the IIO_G_TO_M_S_2 macro for the
acceleration scale since this makes it much easier to compare it with the value
given in the datasheet.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Most of the channel offsets and scales in the adis16204 are incorrect:
* Temperature scale is off by a factor of 1000
* Voltage scale is off by a factor of 1000
* Acceleration is scale is in g instead of m/(s**2)
* Temperature offset is completely wrong
This patch fixes these issues.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Fixes the following coccicheck warnings:
drivers/staging/iio/accel/lis3l02dq_ring.c:240:5-10: WARNING: Comparison to bool
drivers/staging/iio/iio_dummy_evgen.c:111:6-25: WARNING: Comparison to bool
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
probably not the most important patch in the world
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Cc: manuel.stahl@iis.fraunhofer.de
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The driver has not been building for some time after the
irq_to_gpio function has been removed from the kernel.
The only board in the upstream kernel that provides
this device is the "Stargate 2", which is also maintained
by Jonathan Cameron. Rather than working around the problem
by adding new platform data for this driver, this patch
uses the of_gpio framework to get to the gpio number.
However, the stargate2 code does not (yet) use DT based
probing, so it is still broken, but at least building
allyesconfig works again.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Some drivers define a DRIVER_NAME, but never use the define. This patch removes
defines.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
irq_enabled is only set, but never read
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@r1@
statement S;
position p,p1;
@@
S@p1;@p
@script:python r2@
p << r1.p;
p1 << r1.p1;
@@
if p[0].line != p1[0].line_end:
cocci.include_match(False)
@@
position r1.p;
@@
-;@p
// </smpl>
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Most of the channel offsets and scales in the adis16203 are incorrect:
* Temperature scale is off by a factor of 1000
* Voltage scale is off by a factor of 1000
* Temperature offset is completely wrong
This patch fixes these issues.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Most of the channel offsets and scales in the adis16201 are incorrect:
* Temperature scale is off by a factor of 1000
* Voltage scale is off by a factor of 1000
* Acceleration scale is in g instead of m/(s**2)
* Temperature offset is completely wrong
This patch fixes these issues.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Some datasheets use a different unit to specify the channel scale than what IIO
expects it to be. This patch adds two helper macros which allow to convert units
commonly used in datasheets to IIO units:
* acceleration: g -> meter / second**2
* angular velocity: degree (/ second) -> rad (/ second)
This makes it much more convenient to specify and also easier to verify a
channel's scale attribute.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>