[ Upstream commit f82d27dcff ]
Clause instructions with precise memory enabled currently hang the
shader so set capabilities flag to disabled since it's unsafe to use
for debugging.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Tested-by: Lancelot Six <lancelot.six@amd.com>
Reviewed-by: Harish Kasiviswanathan <harish.kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a92741e72f ]
If peer memory is accessible through XGMI, allow leaving it in VRAM
rather than forcing its migration to GTT on DMABuf attachment.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Tested-by: Hao (Claire) Zhou <hao.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 372c8d72c3)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 756c85e4d0 ]
[Why]
Urgent latency adjustment was disabled on DCN35 due to issues with P0
enablement on some platforms. Without urgent latency, underflows occur
when doing certain high timing configurations. After testing, we found
that reenabling urgent latency didn't reintroduce p0 support on multiple
platforms.
[How]
renable urgent latency on DCN35 and setting it to 3000 Mhz.
This reverts commit 3412860cc4.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Nicholas Susanto <nsusanto@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cd74ce1f0c)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 874697e127 ]
[Why & How]
Instead of dropping DRR updates, defer them. This fixes issues where
monitor continues to see incorrect refresh rate after VRR was turned off
by userspace.
Fixes: 32953485c5 ("drm/amd/display: Do not update DRR while BW optimizations pending")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3546
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: John Olender <john.olender@gmail.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 53761b7ecd)
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34935701b7 ]
[Why&How]
stream->adjust will be overwritten by update->crtc_timing_adjust.
We should set update->crtc_timing_adjust->timing_adjust_pending
and then overwrite stream->adjust.
Reset update->crtc_timing_adjust->timing_adjust_pending after
the assignment.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Zhongwei Zhang <Zhongwei.Zhang@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 874697e127 ("drm/amd/display: Defer BW-optimization-blocked DRR adjustments")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd00b29b5f ]
[Why&How]
Vtotal is not applied to HW when handling vsync interrupt.
Make sure vtotal is aligned before enable replay.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Danny Wang <danny.wang@amd.com>
Signed-off-by: Zhongwei Zhang <Zhongwei.Zhang@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 874697e127 ("drm/amd/display: Defer BW-optimization-blocked DRR adjustments")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c6c8d1a1e ]
[WHY]
DTBCLK_P is used to generate virtual pixel clock, and to drive the HPO
stream encoder clock. Programming the required clock when
enabling/disabling both components can cause issues.
For example, if HPO is being disabled and clock source is changed to
REFCLK, virtual pixel rate will then be wrong, causing issues in CRTC.
[HOW]
Only program the DTBCLK_P when programming CRTC, as its expected it will
be enabled prior to HPO, and disabled after HPO in all valid cases.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 874697e127 ("drm/amd/display: Defer BW-optimization-blocked DRR adjustments")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4aaffc8575 upstream.
Set the s3/s0ix and s4 flags in the pm notifier so that we can skip
the resource evictions properly in pm prepare based on whether
we are suspending or hibernating. Drop the eviction as processes
are not frozen at this time, we we can end up getting stuck trying
to evict VRAM while applications continue to submit work which
causes the buffers to get pulled back into VRAM.
v2: Move suspend flags out of pm notifier (Mario)
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4178
Fixes: 2965e6355d ("drm/amd: Add Suspend/Hibernate notification callback support")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 06f2dcc241)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9c1798259b upstream.
Since commit 559358282e ("drm/fb-helper: Don't use the preferred depth
for the BPP default"), RGB565 displays such as the CFAF240320X no longer
render correctly: colors are distorted and the content is shown twice
horizontally.
This regression is due to the fbdev emulation layer defaulting to 32 bits
per pixel, whereas the display expects 16 bpp (RGB565). As a result, the
framebuffer data is incorrectly interpreted by the panel.
Fix the issue by calling drm_client_setup_with_fourcc() with a format
explicitly selected based on the display's bits-per-pixel value. For 16
bpp, use DRM_FORMAT_RGB565; for other values, fall back to the previous
behavior. This ensures that the allocated framebuffer format matches the
hardware expectations, avoiding color and layout corruption.
Tested on a CFAF240320X display with an RGB565 configuration, confirming
correct colors and layout after applying this patch.
Cc: stable@vger.kernel.org
Fixes: 559358282e ("drm/fb-helper: Don't use the preferred depth for the BPP default")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250417103458.2496790-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1b0caa5f5a upstream.
Call drm_client_setup() to run the kernel's default client setup
for DRM. Set fbdev_probe in struct drm_driver, so that the client
setup can start the common fbdev client.
v5:
- select DRM_CLIENT_SELECTION
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-32-tzimmermann@suse.de
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8998eedda2 upstream.
Rework fbdev probing to support fbdev_probe in struct drm_driver
and reimplement the old fb_probe callback on top of it. Provide an
initializer macro for struct drm_driver that sets the callback
according to the kernel configuration.
This change allows the common fbdev client to run on top of DMA-
based DRM drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-6-tzimmermann@suse.de
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 03552d8ac0 upstream.
The workqueue used for the reset worker is marked as WQ_MEM_RECLAIM,
while the GSC one isn't (and can't be as we need to do memory
allocations in the gsc worker). Therefore, we can't flush the latter
from the former.
The reason why we had such a flush was to avoid interrupting either
the GSC FW load or in progress GSC proxy operations. GSC proxy
operations fall into 2 categories:
1) GSC proxy init: this only happens once immediately after GSC FW load
and does not support being interrupted. The only way to recover from
an interruption of the proxy init is to do an FLR and re-load the GSC.
2) GSC proxy request: this can happen in response to a request that
the driver sends to the GSC. If this is interrupted, the GSC FW will
timeout and the driver request will be failed, but overall the GSC
will keep working fine.
Flushing the work allowed us to avoid interruption in both cases (unless
the hang came from the GSC engine itself, in which case we're toast
anyway). However, a failure on a proxy request is tolerable if we're in
a scenario where we're triggering a GT reset (i.e., something is already
gone pretty wrong), so what we really need to avoid is interrupting
the init flow, which we can do by polling on the register that reports
when the proxy init is complete (as that ensure us that all the load and
init operations have been completed).
Note that during suspend we still want to do a flush of the worker to
make sure it completes any operations involving the HW before the power
is cut.
v2: fix spelling in commit msg, rename waiter function (Julia)
Fixes: dd0e89e5ed ("drm/xe/gsc: GSC FW load")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4830
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://lore.kernel.org/r/20250502155104.2201469-1-daniele.ceraolospurio@intel.com
(cherry picked from commit 12370bfcc4)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d33724ffb7 upstream.
It's expected that we'll encounter temporary exceptions
during aux transactions. Adjust logging from drm_info to
drm_dbg_dp to prevent flooding with unnecessary log messages.
Fixes: 3637e457eb ("drm/amd/display: Fix wrong handling for AUX_DEFER case")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250513032026.838036-1-Wayne.Lin@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9a9c3e1fe5)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d433981385 upstream.
[Why]
Now forcing aux->transfer to return 0 when incomplete AUX write is
inappropriate. It should return bytes have been transferred.
[How]
aux->transfer is asked not to change original msg except reply field of
drm_dp_aux_msg structure. Copy the msg->buffer when it's write request,
and overwrite the first byte when sink reply 1 byte indicating partially
written byte number. Then we can return the correct value without
changing the original msg.
Fixes: 3637e457eb ("drm/amd/display: Fix wrong handling for AUX_DEFER case")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7ac37f0dcd)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a0fa7873f2 upstream.
After process exit to unmap csa and free GPU vm, if signal is accepted
and then waiting to take vm lock is interrupted and return, it causes
memory leaking and below warning backtrace.
Change to use uninterruptible wait lock fix the issue.
WARNING: CPU: 69 PID: 167800 at amd/amdgpu/amdgpu_kms.c:1525
amdgpu_driver_postclose_kms+0x294/0x2a0 [amdgpu]
Call Trace:
<TASK>
drm_file_free.part.0+0x1da/0x230 [drm]
drm_close_helper.isra.0+0x65/0x70 [drm]
drm_release+0x6a/0x120 [drm]
amdgpu_drm_release+0x51/0x60 [amdgpu]
__fput+0x9f/0x280
____fput+0xe/0x20
task_work_run+0x67/0xa0
do_exit+0x217/0x3c0
do_group_exit+0x3b/0xb0
get_signal+0x14a/0x8d0
arch_do_signal_or_restart+0xde/0x100
exit_to_user_mode_loop+0xc1/0x1a0
exit_to_user_mode_prepare+0xf4/0x100
syscall_exit_to_user_mode+0x17/0x40
do_syscall_64+0x69/0xc0
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7dbbfb3c17)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2d73b0845a upstream.
On GFX1151, the reported MALL cache size reflects only
half of its actual size; this adjustment corrects the discrepancy.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0a5c060b59)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fe14c0f096 upstream.
This reverts commit 272e6aab14.
Applying degamma curve to the cursor by default breaks Linux userspace
expectation.
On Linux, AMD display manager enables cursor degamma ROM just for
implict sRGB on HW versions where degamma is split into two blocks:
degamma ROM for pre-defined TFs and `gamma correction` for user/custom
curves, and degamma ROM settings doesn't apply to cursor plane.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1513
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2803
Reported-by: Michel Dänzer <michel.daenzer@mailbox.org>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4144
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f6a305d474)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 66c8f7b435 ]
For determining actual job execution time, save the current value of the
CTX_TIMESTAMP register rather than the value saved in LRC since the
current register value is the closest to the start time of the job.
v2: Define MI_STORE_REGISTER_MEM to fix compile error
v3: Place MI_STORE_REGISTER_MEM sorted by MI_INSTR (Lucas)
Fixes: 65921374c4 ("drm/xe: Emit ctx timestamp copy in ring ops")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250509161159.2173069-6-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 38b14233e5)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0ce1aaa85 ]
This reverts commit 3a9626c816.
This breaks S4 because we end up setting the s3/s0ix flags
even when we are entering s4 since prepare is used by both
flows. The causes both the S3/s0ix and s4 flags to be set
which breaks several checks in the driver which assume they
are mutually exclusive.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3634
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ce8f7d9589)
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2965e6355d ]
As part of the suspend sequence VRAM needs to be evicted on dGPUs.
In order to make suspend/resume more reliable we moved this into
the pmops prepare() callback so that the suspend sequence would fail
but the system could remain operational under high memory usage suspend.
Another class of issues exist though where due to memory fragementation
there isn't a large enough contiguous space and swap isn't accessible.
Add support for a suspend/hibernate notification callback that could
evict VRAM before tasks are frozen. This should allow paging out to swap
if necessary.
Link: https://github.com/ROCm/ROCK-Kernel-Driver/issues/174
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3476
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2362
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3781
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Link: https://lore.kernel.org/r/20241128032656.2090059-2-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: d0ce1aaa85 ("Revert "drm/amd: Stop evicting resources on APUs in suspend"")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a966d677d ]
With xe_force_wake_get() now returning the refcount-incremented domain
mask, a return value of 0 indicates failure for single domains.
Change assert condition to incorporate this change in return and
pass the return value to xe_force_wake_put()
v3
- return xe_wakeref_t instead of int in xe_force_wake_get()
v5
- return unsigned int for xe_force_wake_get()
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241014075601.2324382-13-himal.prasad.ghimiray@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Stable-dep-of: 51c0ee84e4 ("drm/xe/tests/mocs: Hold XE_FORCEWAKE_ALL for LNCF regs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3924f45d4d upstream.
[Why]
amdgpu_dm_process_dmub_aux_transfer_sync() should return all exact data
reply from the sink side. Don't do the analysis job in it.
[How]
Remove unnecessary check condition AUX_TRANSACTION_REPLY_AUX_ACK.
Fixes: ead08b95fa ("drm/amd/display: Fix race condition in DPIA AUX transfer")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9b540e3fe6)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 65924ec69b upstream.
[Why]
We incorrectly ack all bytes get written when the reply actually is defer.
When it's defer, means sink is not ready for the request. We should
retry the request.
[How]
Only reply all data get written when receive I2C_ACK|AUX_ACK. Otherwise,
reply the number of actual written bytes received from the sink.
Add some messages to facilitate debugging as well.
Fixes: ad6756b4d7 ("drm/amd/display: Shift dc link aux to aux_payload")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3637e457eb)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 396dc51b3b upstream.
[Why & How]
"Request length != reply length" is expected behavior defined in spec.
It's not an invalid reply. Besides, replied data handling logic is not
designed to be written in amdgpu_dm_process_dmub_aux_transfer_sync().
Remove the incorrectly handling section.
Fixes: ead08b95fa ("drm/amd/display: Fix race condition in DPIA AUX transfer")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 81b5c6fa62)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bc70e11b55 upstream.
[Why & How]
Fix the checking condition for detecting AUX_RET_ERROR_PROTOCOL_ERROR.
It was wrongly checking by "not equals to"
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1db6c9e9b6)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f1c6be3999 upstream.
[Why]
FAMS2 expects vmin/vmax to be updated in the case when freesync is
off, but supported. But we only update it when freesync is enabled.
[How]
Change the vsync handler such that dc_stream_adjust_vmin_vmax() its called
irrespective of whether freesync is enabled. If freesync is supported,
then there is no harm in updating vmin/vmax registers.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3546
Reviewed-by: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cfb2d41831)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9984db6374 upstream.
[Why]
"BUG: sleeping function called from invalid context" error.
after:
"drm/amd/display: Protect FPU in dml2_validate()/dml21_validate()"
The populate_dml_plane_cfg_from_plane_state() uses the GFP_KERNEL flag
for memory allocation, which shouldn't be used in atomic contexts.
The allocation is needed only for using another helper function
get_scaler_data_for_plane().
[How]
Modify helpers to pass a pointer to scaler_data within existing context,
eliminating the need for dynamic memory allocation/deallocation
and copying.
Fixes: 366e77cd49 ("drm/amd/display: Protect FPU in dml2_validate()/dml21_validate()")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bd3e84bc98)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b7e84fb708 upstream.
VCN1_AON_SOC_ADDRESS_3_0 offset varies on different
VCN generations, the issue in vcn4.0.5 is caused by
a different VCN1_AON_SOC_ADDRESS_3_0 offset.
This patch does the following:
1. use the same offset for other VCN generations.
2. use the vcn4.0.5 special offset
3. update vcn_4_0 and vcn_5_0
Acked-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5c89ceda99)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 391008f34e upstream.
For an unknown reason the math to determine the PF queue size does is
not correct - compute UMD applications are overflowing the PF queue
which is fatal. A multippier of 8 fixes the problem.
Fixes: 3338e4f90c ("drm/xe: Use topology to determine page fault queue size")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jagmeet Randhawa <jagmeet.randhawa@intel.com>
Link: https://lore.kernel.org/r/20250408155915.78770-1-matthew.brost@intel.com
(cherry picked from commit 29582e0ea7)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 35e4079bf1 upstream.
When a CL/CSD job times out, we check if the GPU has made any progress
since the last timeout. If so, instead of resetting the hardware, we skip
the reset and let the timer get rearmed. This gives long-running jobs a
chance to complete.
However, when `timedout_job()` is called, the job in question is removed
from the pending list, which means it won't be automatically freed through
`free_job()`. Consequently, when we skip the reset and keep the job
running, the job won't be freed when it finally completes.
This situation leads to a memory leak, as exposed in [1] and [2].
Similarly to commit 704d3d60fe ("drm/etnaviv: don't block scheduler when
GPU is still active"), this patch ensures the job is put back on the
pending list when extending the timeout.
Cc: stable@vger.kernel.org # 6.0
Reported-by: Daivik Bhatia <dtgs1208@gmail.com>
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/12227 [1]
Closes: https://github.com/raspberrypi/linux/issues/6817 [2]
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://lore.kernel.org/r/20250430210643.57924-1-mcanal@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5a3846648c upstream.
[Why]
Defined value of dmub AUX reply command field get updated but didn't
adjust dm receiving side accordingly.
[How]
Check the received reply command value to see if it's updated version
or not. Adjust it if necessary.
Fixes: ead08b95fa ("drm/amd/display: Fix race condition in DPIA AUX transfer")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d5c9ade755)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6b675ab8ef ]
[Why]
Guards automatically release mutex when it goes out of scope making
code easier to follow.
[How]
Replace all use of mutex_lock()/mutex_unlock() with guard(mutex).
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: be593d9d91 ("drm/amd/display: Fix slab-use-after-free in hdcp")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f37bb5486e ]
This reverts commit bfbc68e.
The patch does permit the offending YUV420 @ 59.94 phy_freq and
vclk_freq mode to match in calculations. It also results in all
fractional rates being unavailable for use. This was unintended
and requires the patch to be reverted.
Fixes: bfbc68e4d8 ("drm/meson: vclk: fix calculation of 59.94 fractional rates")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250421201300.778955-2-martin.blumenstingl@googlemail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250421201300.778955-2-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 262de94a3a upstream.
The RCU_MODE_FIXED_SLICE_CCS_MODE setting is not getting invoked
in the gt reset path after the ccs_mode setting by the user.
Add it to engine register update list (in hw_engine_setup_default_state())
which ensures it gets set in the gt reset and engine reset paths.
v2: Add register update to engine list to ensure it gets updated
after engine reset also.
Fixes: 0d97ecce16 ("drm/xe: Enable Fixed CCS mode setting")
Cc: stable@vger.kernel.org
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250327185604.18230-1-niranjana.vishwanathapura@intel.com
(cherry picked from commit 12468e519f)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1a8bc0fe80 ]
On r6x2b6x2g6x2 displays not enough blank data is sent to blank the
entire screen. When support for these displays was added, the dirty
function was updated to handle the different amount of data, but
blanking was not, and remained hardcoded as 2 bytes per pixel.
This change applies almost the same algorithm used in the dirty function
to the blank function, but there is no fb available at that point, and
no concern about having to transform any data, so the dbidev pixel
format is always used for calculating the length.
Fixes: 4aebb79021 ("drm/mipi-dbi: Add support for DRM_FORMAT_RGB888")
Signed-off-by: Russell Cloran <rcloran@gmail.com>
Link: https://lore.kernel.org/r/20250415053259.79572-1-rcloran@gmail.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 48ccf21fa8 ]
The drm_gem_shmem_test_get_pages_sgt() gets a scatter-gather table using
the drm_gem_shmem_get_sg_table() function and rightfully calls
sg_free_table() on it. However, it's also supposed to kfree() the
returned sg_table, but doesn't.
This leads to a memory leak, reported by kmemleak. Fix it by adding a
kunit action to kfree the sgt when the test ends.
Reported-by: Philipp Stanner <phasta@mailbox.org>
Closes: https://lore.kernel.org/dri-devel/a7655158a6367ac46194d57f4b7433ef0772a73e.camel@mailbox.org/
Fixes: 93032ae634 ("drm/test: add a test suite for GEM objects backed by shmem")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250408140758.1831333-1-mripard@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e21ea8149 ]
On x86_64 with gcc version 13.3.0, I compile kernel with:
make defconfig
./scripts/kconfig/merge_config.sh .config <(
echo CONFIG_COMPILE_TEST=y
)
make KCFLAGS="-fno-inline-functions -fno-inline-small-functions -fno-inline-functions-called-once"
Then I get a linker error:
ld: vmlinux.o: in function `pxp_fw_dependencies_completed':
kintel_pxp.c:(.text+0x95728f): undefined reference to `intel_pxp_gsccs_is_ready_for_sessions'
This is caused by not having a intel_pxp_gsccs_is_ready_for_sessions()
header stub for CONFIG_DRM_I915_PXP=n. Add it.
Signed-off-by: Chen Linxuan <chenlinxuan@uniontech.com>
Fixes: 99afb7cc8c ("drm/i915/pxp: Add ARB session creation and cleanup")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250415090616.2649889-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit b484c1e225)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6ed0dc3fd3 upstream.
[Why]
Recent findings show negligible power savings between IPS2 and RCG
during static desktop. In fact, DCN related clocks are higher
when IPS2 is enabled vs RCG.
RCG_IN_ACTIVE is also the default policy for another OS supported by
DC, and it has faster entry/exit.
[How]
Remove previous logic that checked for IPS2 support, and just default
to `DMUB_IPS_RCG_IN_ACTIVE_IPS2_IN_OFF`.
Fixes: 199888aa25 ("drm/amd/display: Update IPS default mode for DCN35/DCN351")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8f772d79ef)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 32dce6b194 upstream.
Using "depends on" and "select" for the same Kconfig symbol is known to
cause circular dependencies (cmp. "Kconfig recursive dependency
limitations" in Documentation/kbuild/kconfig-language.rst.
DRM drivers are selecting drm helpers so do the same for
DRM_DEBUG_DP_MST_TOPOLOGY_REFS.
Fixes following circular dependency reported on x86 for the downstream
Asahi Linux tree:
error: recursive dependency detected!
symbol DRM_KMS_HELPER is selected by DRM_GEM_SHMEM_HELPER
symbol DRM_GEM_SHMEM_HELPER is selected by RUST_DRM_GEM_SHMEM_HELPER
symbol RUST_DRM_GEM_SHMEM_HELPER is selected by DRM_ASAHI
symbol DRM_ASAHI depends on RUST
symbol RUST depends on CALL_PADDING
symbol CALL_PADDING depends on OBJTOOL
symbol OBJTOOL is selected by STACK_VALIDATION
symbol STACK_VALIDATION depends on UNWINDER_FRAME_POINTER
symbol UNWINDER_FRAME_POINTER is part of choice block at arch/x86/Kconfig.debug:224
symbol <choice> unknown is visible depending on UNWINDER_GUESS
symbol UNWINDER_GUESS prompt is visible depending on STACKDEPOT
symbol STACKDEPOT is selected by DRM_DEBUG_DP_MST_TOPOLOGY_REFS
symbol DRM_DEBUG_DP_MST_TOPOLOGY_REFS depends on DRM_KMS_HELPER
Fixes: 12a280c728 ("drm/dp_mst: Add topology ref history tracking for debugging")
Cc: stable@vger.kernel.org
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250304-drm_debug_dp_mst_topo_kconfig-v1-1-e16fd152f258@jannau.net
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 79af0604eb upstream.
APUs in passthrough mode use HDP flush. 0x7F000 offset used for
remapping HDP flush is mapped to VPE space which could get power gated.
Use another unused offset in BIF space.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d8116a32cd)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bbe5679f30 upstream.
Nouveau is mostly designed in a way that it's expected that fences only
ever get signaled through nouveau_fence_signal(). However, in at least
one other place, nouveau_fence_done(), can signal fences, too. If that
happens (race) a signaled fence remains in the pending list for a while,
until it gets removed by nouveau_fence_update().
Should nouveau_fence_context_kill() run in the meantime, this would be
a bug because the function would attempt to set an error code on an
already signaled fence.
Have nouveau_fence_context_kill() check for a fence being signaled.
Cc: stable@vger.kernel.org # v5.10+
Fixes: ea13e5abf8 ("drm/nouveau: signal pending fences when channel has been killed")
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250415121900.55719-3-phasta@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
