The existing mshv create partition ioctl does not provide a way to
specify which cpu features are enabled in the guest. Instead, it
attempts to enable all features and those that are not supported are
silently disabled by the hypervisor.
This was done to reduce unnecessary complexity and is sufficient for
many cases. However, new scenarios require fine-grained control over
these features.
Define a new mshv_create_partition_v2 structure which supports
passing the disabled processor and xsave feature bits through to the
create partition hypercall directly.
Introduce a new flag MSHV_PT_BIT_CPU_AND_XSAVE_FEATURES which enables
the new structure. If unset, the original mshv_create_partition struct
is used, with the old behavior of enabling all features.
Co-developed-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Currently the MSHV driver rejects mappings that would overlap in
userspace.
Some VMMs require the same memory to be mapped to different parts of
the guest's address space, and so working around this restriction is
difficult.
The hypervisor itself doesn't prohibit mappings that overlap in uaddr,
(really in SPA; system physical addresses), so supporting this in the
driver doesn't require any extra work: only the checks need to be
removed.
Since no userspace code until now has been able to overlap regions in
userspace, relaxing this constraint can't break any existing code.
Signed-off-by: Magnus Kulke <magnuskulke@linux.microsoft.com>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=sd1e
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.18-20251113' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Use the actual segments in a request when for bvec based buffers
- Fix an odd case where the iovec might get leaked for a read/write
request, if it was newly allocated, overflowed the alloc cache, and
hit an early error
- Minor tweak to the query API added in this release, returning the
number of available entries
* tag 'io_uring-6.18-20251113' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/rsrc: don't use blk_rq_nr_phys_segments() as number of bvecs
io_uring/query: return number of available queries
io_uring/rw: ensure allocated iovec gets cleared for early failure
Add a new V4L2 meta format code for the Mali-C55 parameters.
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Nayden Kanchev <nayden.kanchev@arm.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Describe the format of the 3A statistics buffers in the userspace API
header for the mali-c55 ISP.
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Nayden Kanchev <nayden.kanchev@arm.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add a new meta format for the Mali-C55 ISP's 3A Statistics along
with a new descriptor entry.
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Nayden Kanchev <nayden.kanchev@arm.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add definitions and documentation for the custom control that will
be needed by the Mali-C55 ISP driver. This will be a read only
bitmask of the driver's capabilities, informing userspace of which
blocks are fitted and which are absent.
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The Mali-C55 requires input data be in 20-bit format, MSB aligned.
Add some new media bus format macros to represent that input format.
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The Mali-C55 ISP by ARM requires 20-bits per colour channel input on
the bus. Add a new media bus format code to represent it.
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Nayden Kanchev <nayden.kanchev@arm.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
With the introduction of common types for extensible parameters
format, convert the c3-isp-config.h header to use the new types.
Factor-out the documentation that is now part of the common header
and only keep the driver-specific on in place.
The conversion to use common types doesn't impact userspace as the
new types are either identical to the ones already existing in the
C3 ISP uAPI or are 1-to-1 type convertible.
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Keke Li <keke.li@amlogic.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
With the introduction of common types for extensible parameters
format, convert the rkisp1-config.h header to use the new types.
Factor out the documentation that is now part of the common header
and only keep the driver-specific on in place.
The conversion to use common types doesn't impact userspace as the
new types are either identical to the ones already existing in the
RkISP1 uAPI or are 1-to-1 type convertible.
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Michael Riesch <michael.riesch@collabora.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Introduce v4l2-isp.h in the Linux kernel uAPI.
The header includes types for generic ISP configuration parameters
and will be extended in the future with support for generic ISP statistics
formats.
Generic ISP parameters support is provided by introducing two new
types that represent an extensible and versioned buffer of ISP
configuration parameters.
The v4l2_params_buffer represents the container for the ISP
configuration data block. The generic type is defined with a 0-sized
data member that the ISP driver implementations shall properly size
according to their capabilities. The v4l2_params_block_header structure
represents the header to be prepend to each ISP configuration block.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Michael Riesch <michael.riesch@collabora.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.18-rc6).
No conflicts, adjacent changes in:
drivers/net/phy/micrel.c
96a9178a29 ("net: phy: micrel: lan8814 fix reset of the QSGMII interface")
61b7ade9ba ("net: phy: micrel: Add support for non PTP SKUs for lan8814")
and a trivial one in tools/testing/selftests/drivers/net/Makefile.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a way to share an ifq from a src ring that is real (i.e. bound to a
HW RX queue) with other rings. This is done by passing a new flag
IORING_ZCRX_IFQ_REG_IMPORT in the registration struct
io_uring_zcrx_ifq_reg, alongside the fd of an exported zcrx ifq.
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add an option to wrap a zcrx instance into a file and expose it to the
user space. Currently, users can't do anything meaningful with the file,
but it'll be used in a next patch to import it into another io_uring
instance. It's implemented as a new op called ZCRX_CTRL_EXPORT for the
IORING_REGISTER_ZCRX_CTRL registration opcode.
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add an zcrx interface via IORING_REGISTER_ZCRX_CTRL that forces the
kernel to flush / consume entries from the refill queue. Just as with
the IORING_REGISTER_ZCRX_REFILL attempt, the motivation is to address
cases where the refill queue becomes full, and the user can't return
buffers and needs to stash them. It's still a slow path, and the user
should size refill queue appropriately, but it should be helpful for
handling temporary traffic spikes and other unpredictable conditions.
The interface is simpler comparing to ZCRX_REFILL as it doesn't need
temporary refill entry arrays and gives natural batching, whereas
ZCRX_REFILL requires even more user logic to be somewhat efficient.
Also, add a structure for the operation. It's not currently used but
can serve for future improvements like limiting the number of buffers to
process, etc.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It'll be annoying and take enough of boilerplate code to implement
new zcrx features as separate io_uring register opcode. Introduce
IORING_REGISTER_ZCRX_CTRL that will multiplex such calls to zcrx.
Note, there are no real users of the opcode in this patch.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Same problem as with zcrx in the previous patch, the user needs to know
SQ/CQ header sizes to allocated memory before setup to use it for user
provided rings, i.e. IORING_SETUP_NO_MMAP, however that information is
only returned after registration, hence the user is guessing kernel
implementation details.
Return the header size and alignment, which is split with the same
motivation, to allow the user to know the real structure size without
alignment in case there will be more flexible placement schemes in the
future.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new query type IO_URING_QUERY_ZCRX returning the user some basic
information about the interface, which includes allowed flags for areas
and registration and supported IORING_REGISTER_ZCRX_CTRL subcodes.
There is also a chicken-egg problem with user provided refill queue
memory, where offsets and size information is returned after
registration, but to properly allocate memory you need to know it
beforehand, which is why the userspace currently has to guess the RQ
headers size and severely overestimates it. Return the size information.
It's split into "size" and "alignment" fields because for default
placement modes the user is interested in the aligned size, however if
it gets support for more flexible placement, it'll need to only know the
actual header size.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge 6.18-rc io_uring fixes, as certain coming changes depend on some
of these.
* io_uring-6.18:
io_uring/rsrc: don't use blk_rq_nr_phys_segments() as number of bvecs
io_uring/query: return number of available queries
io_uring/rw: ensure allocated iovec gets cleared for early failure
io_uring: fix regbuf vector size truncation
io_uring: fix types for region size calulation
io_uring/zcrx: remove sync refill uapi
io_uring: fix buffer auto-commit for multishot uring_cmd
io_uring: correct __must_hold annotation in io_install_fixed_file
io_uring zcrx: add MAINTAINERS entry
io_uring: Fix code indentation error
io_uring/sqpoll: be smarter on when to update the stime usage
io_uring/sqpoll: switch away from getrusage() for CPU accounting
io_uring: fix incorrect unlikely() usage in io_waitid_prep()
Signed-off-by: Jens Axboe <axboe@kernel.dk>
grab_requested_mnt_ns was changed to return error codes on failure, but
its callers were not updated to check for error pointers, still checking
only for a NULL return value.
This commit updates the callers to use IS_ERR() or IS_ERR_OR_NULL() and
PTR_ERR() to correctly check for and propagate errors.
This also makes sure that the logic actually works and mount namespace
file descriptors can be used to refere to mounts.
Christian Brauner <brauner@kernel.org> says:
Rework the patch to be more ergonomic and in line with our overall error
handling patterns.
Fixes: 7b9d14af87 ("fs: allow mount namespace fd")
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Andrei Vagin <avagin@google.com>
Link: https://patch.msgid.link/20251111062815.2546189-1-avagin@google.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
When APEI fails to handle a stage-2 synchronous external abort (SEA),
today KVM injects an asynchronous SError to the VCPU then resumes it,
which usually results in unpleasant guest kernel panic.
One major situation of guest SEA is when vCPU consumes recoverable
uncorrected memory error (UER). Although SError and guest kernel panic
effectively stops the propagation of corrupted memory, guest may
re-use the corrupted memory if auto-rebooted; in worse case, guest
boot may run into poisoned memory. So there is room to recover from
an UER in a more graceful manner.
Alternatively KVM can redirect the synchronous SEA event to VMM to
- Reduce blast radius if possible. VMM can inject a SEA to VCPU via
KVM's existing KVM_SET_VCPU_EVENTS API. If the memory poison
consumption or fault is not from guest kernel, blast radius can be
limited to the triggering thread in guest userspace, so VM can
keep running.
- Allow VMM to protect from future memory poison consumption by
unmapping the page from stage-2, or to interrupt guest of the
poisoned page so guest kernel can unmap it from stage-1 page table.
- Allow VMM to track SEA events that VM customers care about, to restart
VM when certain number of distinct poison events have happened,
to provide observability to customers in log management UI.
Introduce an userspace-visible feature to enable VMM handle SEA:
- KVM_CAP_ARM_SEA_TO_USER. As the alternative fallback behavior
when host APEI fails to claim a SEA, userspace can opt in this new
capability to let KVM exit to userspace during SEA if it is not
owned by host.
- KVM_EXIT_ARM_SEA. A new exit reason is introduced for this.
KVM fills kvm_run.arm_sea with as much as possible information about
the SEA, enabling VMM to emulate SEA to guest by itself.
- Sanitized ESR_EL2. The general rule is to keep only the bits
useful for userspace and relevant to guest memory.
- Flags indicating if faulting guest physical address is valid.
- Faulting guest physical and virtual addresses if valid.
Signed-off-by: Jiaqi Yan <jiaqiyan@google.com>
Co-developed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://msgid.link/20251013185903.1372553-2-jiaqiyan@google.com
Signed-off-by: Oliver Upton <oupton@kernel.org>
Now that support for recallable directory delegations is available,
expose this functionality to userland with new F_SETDELEG and F_GETDELEG
commands for fcntl().
Note that this also allows userland to request a FL_DELEG type lease on
files too. Userland applications that do will get signalled when there
are metadata changes in addition to just data changes (which is a
limitation of FL_LEASE leases).
These commands accept a new "struct delegation" argument that contains a
flags field for future expansion.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20251111-dir-deleg-ro-v6-17-52f3feebb2f2@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Adds DEVLINK_ESWITCH_MODE_SWITCHDEV_INACTIVE attribute to UAPI and
documentation.
Before having traffic flow through an eswitch, a user may want to have the
ability to block traffic towards the FDB until FDB is fully programmed and
the user is ready to send traffic to it. For example: when two eswitches
are present for vports in a multi-PF setup, one eswitch may take over the
traffic from the other when the user chooses.
Before this take over, a user may want to first program the inactive
eswitch and then once ready redirect traffic to this new eswitch.
switchdev modes transition semantics:
legacy->switchdev_inactive: Create switchdev mode normally, traffic not
allowed to flow yet.
switchdev_inactive->switchdev: Enable traffic to flow.
switchdev->switchdev_inactive: Block traffic on the FDB, FDB and
representros state and content is preserved.
When eswitch is configured to this mode, traffic is ignored/dropped on
this eswitch FDB, while current configuration is kept, e.g FDB rules and
netdev representros are kept available, FDB programming is allowed.
Example:
# start inactive switchdev
devlink dev eswitch set pci/0000:08:00.1 mode switchdev_inactive
# setup TC rules, representors etc ..
# activate
devlink dev eswitch set pci/0000:08:00.1 mode switchdev
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20251108070404.1551708-2-saeed@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Bring in the shared branch with the kbuild tree to enable
'-fms-extensions' for 6.19. Further namespace cleanup work
requires this extension.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Previously, raid array used the maximum logical block size (LBS)
of all member disks. Adding a larger LBS disk at runtime could
unexpectedly increase RAID's LBS, risking corruption of existing
partitions. This can be reproduced by:
```
# LBS of sd[de] is 512 bytes, sdf is 4096 bytes.
mdadm -CRq /dev/md0 -l1 -n3 /dev/sd[de] missing --assume-clean
# LBS is 512
cat /sys/block/md0/queue/logical_block_size
# create partition md0p1
parted -s /dev/md0 mklabel gpt mkpart primary 1MiB 100%
lsblk | grep md0p1
# LBS becomes 4096 after adding sdf
mdadm --add -q /dev/md0 /dev/sdf
cat /sys/block/md0/queue/logical_block_size
# partition lost
partprobe /dev/md0
lsblk | grep md0p1
```
Simply restricting larger-LBS disks is inflexible. In some scenarios,
only disks with 512 bytes LBS are available currently, but later, disks
with 4KB LBS may be added to the array.
Making LBS configurable is the best way to solve this scenario.
After this patch, the raid will:
- store LBS in disk metadata
- add a read-write sysfs 'mdX/logical_block_size'
Future mdadm should support setting LBS via metadata field during RAID
creation and the new sysfs. Though the kernel allows runtime LBS changes,
users should avoid modifying it after creating partitions or filesystems
to prevent compatibility issues.
Only 1.x metadata supports configurable LBS. 0.90 metadata inits all
fields to default values at auto-detect. Supporting 0.90 would require
more extensive changes and no such use case has been observed.
Note that many RAID paths rely on PAGE_SIZE alignment, including for
metadata I/O. A larger LBS than PAGE_SIZE will result in metadata
read/write failures. So this config should be prevented.
Link: https://lore.kernel.org/linux-raid/20251103125757.1405796-6-linan666@huaweicloud.com
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
It's useful to know which query opcodes are available. Extend the
structure and return that. It's a trivial change, and even though it can
be painlessly extended later, it'd still require adding a v2 of the
structure.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix kernel-doc warnings so that there no other kernel-doc issues
in <uapi/linux/tee.h>:
- add ending ':' to some struct members as needed for kernel-doc
- change struct name in kernel-doc to match the actual struct name (2x)
- add a @params: kernel-doc entry multiple times
Warning: tee.h:265 struct member 'ret_origin' not described
in 'tee_ioctl_open_session_arg'
Warning: tee.h:265 struct member 'num_params' not described
in 'tee_ioctl_open_session_arg'
Warning: tee.h:265 struct member 'params' not described
in 'tee_ioctl_open_session_arg'
Warning: tee.h:351 struct member 'num_params' not described
in 'tee_iocl_supp_recv_arg'
Warning: tee.h:351 struct member 'params' not described
in 'tee_iocl_supp_recv_arg'
Warning: tee.h:372 struct member 'num_params' not described
in 'tee_iocl_supp_send_arg'
Warning: tee.h:372 struct member 'params' not described
in 'tee_iocl_supp_send_arg'
Warning: tee.h:298: expecting prototype for struct
tee_ioctl_invoke_func_arg. Prototype was for
struct tee_ioctl_invoke_arg instead
Warning: tee.h:473: expecting prototype for struct
tee_ioctl_invoke_func_arg. Prototype was for struct
tee_ioctl_object_invoke_arg instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Provide a driver api for reporting device statistics required by the
"Implementation Requirements" section of the PSP Architecture
Specification. Use a warning to ensure drivers report stats required
by the spec.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20251106002608.1578518-4-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Track and report stats common to all psp devices from the core. A
'stale-event' is when the core marks the rx state of an active
psp_assoc as incapable of authenticating psp encapsulated data.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20251106002608.1578518-2-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sched:
- Fix deadlock
amdgpu:
- Reset fixes
- Misc fixes
- Panel scaling fixes
- HDMI fix
- S0ix fixes
- Hibernation fix
- Secure display fix
- Suspend fix
- MST fix
amdkfd:
- Process cleanup fix
xe:
- Fix missing synchronization on unbind
- Fix device shutdown when doing FLR
- Fix user fence signaling order
i915:
- Avoid lock inversion when pinning to GGTT on CHV/BXT+VTD
- Fix conversion between clock ticks and nanoseconds
mediatek:
- Disable AFBC support on Mediatek DRM driver
- Add pm_runtime support for GCE power control
imagination:
- kconfig: Fix dependencies
nouveau:
- Set DMA mask earlier
- Advertize correct modifiers for GB20x
pixpaper:
- kconfig: Fix dependencies
-----BEGIN PGP SIGNATURE-----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=COpG
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2025-11-08' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Back from travel, thanks to Simona for handling things. regular fixes,
seems about the right size, but spread out a bit.
amdgpu has the usual range of fixes, xe has a few fixes, and nouveau
has a couple of fixes, one for blackwell modifiers on 8/16 bit
surfaces.
Otherwise a few small fixes for mediatek, sched, imagination and
pixpaper.
sched:
- Fix deadlock
amdgpu:
- Reset fixes
- Misc fixes
- Panel scaling fixes
- HDMI fix
- S0ix fixes
- Hibernation fix
- Secure display fix
- Suspend fix
- MST fix
amdkfd:
- Process cleanup fix
xe:
- Fix missing synchronization on unbind
- Fix device shutdown when doing FLR
- Fix user fence signaling order
i915:
- Avoid lock inversion when pinning to GGTT on CHV/BXT+VTD
- Fix conversion between clock ticks and nanoseconds
mediatek:
- Disable AFBC support on Mediatek DRM driver
- Add pm_runtime support for GCE power control
imagination:
- kconfig: Fix dependencies
nouveau:
- Set DMA mask earlier
- Advertize correct modifiers for GB20x
pixpaper:
- kconfig: Fix dependencies"
* tag 'drm-fixes-2025-11-08' of https://gitlab.freedesktop.org/drm/kernel: (26 commits)
drm/xe: Enforce correct user fence signaling order using
drm/xe: Do clean shutdown also when using flr
drm/xe: Move declarations under conditional branch
drm/xe/guc: Synchronize Dead CT worker with unbind
drm/amd/display: Enable mst when it's detected but yet to be initialized
drm/amdgpu: Fix wait after reset sequence in S3
drm/amd: Fix suspend failure with secure display TA
drm/amdgpu: fix gpu page fault after hibernation on PF passthrough
drm/tiny: pixpaper: add explicit dependency on MMU
drm/nouveau: Advertise correct modifiers on GB20x
drm: define NVIDIA DRM format modifiers for GB20x
drm/nouveau: set DMA mask before creating the flush page
drm/sched: Fix deadlock in drm_sched_entity_kill_jobs_cb
drm/amd/display: Fix NULL deref in debugfs odm_combine_segments
drm/amdkfd: Don't clear PT after process killed
drm/amdgpu/smu: Handle S0ix for vangogh
drm/amdgpu: Drop PMFW RLC notifier from amdgpu_device_suspend()
drm/amd/display: Fix black screen with HDMI outputs
drm/amd/display: Don't stretch non-native images by default in eDP
drm/amd/pm: fix missing device_attr cleanup in amdgpu_pm_sysfs_init()
...
-----BEGIN PGP SIGNATURE-----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=D3Vm
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.18-20251106' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Remove the sync refill API that was added in this release, in
anticipation of doing it in a better way for the next release
- Fix type extension for calculating size off nr_pages, like we do
in other spots
* tag 'io_uring-6.18-20251106' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: fix types for region size calulation
io_uring/zcrx: remove sync refill uapi
Add support for a new DSA tagging protocol driver for the MaxLinear
GSW1xx switch family. The GSW1xx switches use a proprietary 8-byte
special tag inserted between the source MAC address and the EtherType
field to indicate the source and destination ports for frames
traversing the CPU port.
Implement the tag handling logic to insert the special tag on transmit
and parse it on receive.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://patch.msgid.link/0e973ebfd9433c30c96f50670da9e9449a0d98f2.1762170107.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.18-rc5).
Conflicts:
drivers/net/wireless/ath/ath12k/mac.c
9222582ec5 ("Revert "wifi: ath12k: Fix missing station power save configuration"")
6917e268c4 ("wifi: ath12k: Defer vdev bring-up until CSA finalize to avoid stale beacon")
https://lore.kernel.org/11cece9f7e36c12efd732baa5718239b1bf8c950.camel@sipsolutions.net
Adjacent changes:
drivers/net/ethernet/intel/Kconfig
b1d16f7c00 ("libie: depend on DEBUG_FS when building LIBIE_FWLOG")
93f53db9f9 ("ice: switch to Page Pool")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - new code bugs:
- ptp: expose raw cycles only for clocks with free-running counter
- bonding: fix null-deref in actor_port_prio setting
- mdio: ERR_PTR-check regmap pointer returned by device_node_to_regmap()
- eth: libie: depend on DEBUG_FS when building LIBIE_FWLOG
Previous releases - regressions:
- virtio_net: fix perf regression due to bad alignment of
virtio_net_hdr_v1_hash
- Revert "wifi: ath10k: avoid unnecessary wait for service ready message"
caused regressions for QCA988x and QCA9984
- Revert "wifi: ath12k: Fix missing station power save configuration"
caused regressions for WCN7850
- eth: bnxt_en: shutdown FW DMA in bnxt_shutdown(), fix memory
corruptions after kexec
Previous releases - always broken:
- virtio-net: fix received packet length check for big packets
- sctp: fix races in socket diag handling
- wifi: add an hrtimer-based delayed work item to avoid low granularity
of timers set relatively far in the future, and use it where it matters
(e.g. when performing AP-scheduled channel switch)
- eth: mlx5e:
- correctly propagate error in case of module EEPROM read failure
- fix HW-GRO on systems with PAGE_SIZE == 64kB
- dsa: b53: fixes for tagging, link configuration / RMII, FDB, multicast
- phy: lan8842: implement latest errata
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=a/Ml
-----END PGP SIGNATURE-----
Merge tag 'net-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
Including fixes from bluetooth and wireless.
Current release - new code bugs:
- ptp: expose raw cycles only for clocks with free-running counter
- bonding: fix null-deref in actor_port_prio setting
- mdio: ERR_PTR-check regmap pointer returned by
device_node_to_regmap()
- eth: libie: depend on DEBUG_FS when building LIBIE_FWLOG
Previous releases - regressions:
- virtio_net: fix perf regression due to bad alignment of
virtio_net_hdr_v1_hash
- Revert "wifi: ath10k: avoid unnecessary wait for service ready
message" caused regressions for QCA988x and QCA9984
- Revert "wifi: ath12k: Fix missing station power save configuration"
caused regressions for WCN7850
- eth: bnxt_en: shutdown FW DMA in bnxt_shutdown(), fix memory
corruptions after kexec
Previous releases - always broken:
- virtio-net: fix received packet length check for big packets
- sctp: fix races in socket diag handling
- wifi: add an hrtimer-based delayed work item to avoid low
granularity of timers set relatively far in the future, and use it
where it matters (e.g. when performing AP-scheduled channel switch)
- eth: mlx5e:
- correctly propagate error in case of module EEPROM read failure
- fix HW-GRO on systems with PAGE_SIZE == 64kB
- dsa: b53: fixes for tagging, link configuration / RMII, FDB,
multicast
- phy: lan8842: implement latest errata"
* tag 'net-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
selftests/vsock: avoid false-positives when checking dmesg
net: bridge: fix MST static key usage
net: bridge: fix use-after-free due to MST port state bypass
lan966x: Fix sleeping in atomic context
bonding: fix NULL pointer dereference in actor_port_prio setting
net: dsa: microchip: Fix reserved multicast address table programming
net: wan: framer: pef2256: Switch to devm_mfd_add_devices()
net: libwx: fix device bus LAN ID
net/mlx5e: SHAMPO, Fix header formulas for higher MTUs and 64K pages
net/mlx5e: SHAMPO, Fix skb size check for 64K pages
net/mlx5e: SHAMPO, Fix header mapping for 64K pages
net: ti: icssg-prueth: Fix fdb hash size configuration
net/mlx5e: Fix return value in case of module EEPROM read error
net: gro_cells: Reduce lock scope in gro_cell_poll
libie: depend on DEBUG_FS when building LIBIE_FWLOG
wifi: mac80211_hwsim: Limit destroy_on_close radio removal to netgroup
netpoll: Fix deadlock in memory allocation under spinlock
net: ethernet: ti: netcp: Standardize knav_dma_open_channel to return NULL on error
virtio-net: fix received length check in big packets
bnxt_en: Fix warning in bnxt_dl_reload_down()
...
Fix all kernel-doc warnings in <uapi/linux/isst_if.h>:
- don't use "[]" in the variable name in kernel-doc
- add a few missing entries
- change "power_domain" to "power_domain_id" in kernel-doc to match
the struct member name
- add a leading '@' on a few existing kernel-doc lines
- use '_' instead of '-' in struct member names
Examples (but not all 27 warnings):
Warning: include/uapi/linux/isst_if.h:63 struct member 'cpu_map'
not described in 'isst_if_cpu_maps'
Warning: ../include/uapi/linux/isst_if.h:95 struct member 'req_count'
not described in 'isst_if_io_regs'
Warning: include/uapi/linux/isst_if.h:132 struct member 'mbox_cmd'
not described in 'isst_if_mbox_cmds'
Warning: ../include/uapi/linux/isst_if.h:183 struct member 'supported'
not described in 'isst_core_power'
Warning: ../include/uapi/linux/isst_if.h:206 struct member
'power_domain_id' not described in 'isst_clos_param'
Warning: ../include/uapi/linux/isst_if.h:239 struct member 'assoc_info'
not described in 'isst_if_clos_assoc_cmds'
Warning: ../include/uapi/linux/isst_if.h:286 struct member 'sst_tf_support'
not described in 'isst_perf_level_info'
Warning: ../include/uapi/linux/isst_if.h:375 struct member 'trl_freq_mhz'
not described in 'isst_perf_level_data_info'
Warning: ../include/uapi/linux/isst_if.h:475 struct member 'max_buckets'
not described in 'isst_turbo_freq_info'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251023194615.180824-1-rdunlap@infradead.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fix all kernel-doc warnings in include/uapi/drm/panfrost_drm.h.
This mostly means modifying existing comments to conform to
kernel-doc format, but there also some additions of missing
kernel-doc comments and changing non-kernel-doc comments to
use "/*" to begin them.
Warning: panfrost_drm.h:83 struct member 'jc' not described
in 'drm_panfrost_submit'
Warning: panfrost_drm.h:83 struct member 'in_syncs' not described
in 'drm_panfrost_submit'
Warning: panfrost_drm.h:83 struct member 'in_sync_count' not described
in 'drm_panfrost_submit'
Warning: panfrost_drm.h:83 struct member 'out_sync' not described
in 'drm_panfrost_submit'
Warning: panfrost_drm.h:83 struct member 'bo_handles' not described
in 'drm_panfrost_submit'
Warning: panfrost_drm.h:83 struct member 'bo_handle_count' not described
in 'drm_panfrost_submit'
Warning: panfrost_drm.h:83 struct member 'requirements' not described
in 'drm_panfrost_submit'
Warning: panfrost_drm.h:83 struct member 'jm_ctx_handle' not described
in 'drm_panfrost_submit'
Warning: panfrost_drm.h:83 struct member 'pad' not described
in 'drm_panfrost_submit'
Warning: panfrost_drm.h:116 Incorrect use of kernel-doc format:
* Returned offset for the BO in the GPU address space. This offset
Warning: panfrost_drm.h:124 struct member 'size' not described
in 'drm_panfrost_create_bo'
Warning: panfrost_drm.h:124 struct member 'flags' not described
in 'drm_panfrost_create_bo'
Warning: panfrost_drm.h:124 struct member 'handle' not described
in 'drm_panfrost_create_bo'
Warning: panfrost_drm.h:124 struct member 'pad' not described
in 'drm_panfrost_create_bo'
Warning: panfrost_drm.h:124 struct member 'nonzero' not described
in 'drm_panfrost_create_bo'
Warning: panfrost_drm.h:143 struct member 'handle' not described
in 'drm_panfrost_mmap_bo'
Warning: panfrost_drm.h:143 struct member 'flags' not described
in 'drm_panfrost_mmap_bo'
Warning: panfrost_drm.h:143 struct member 'offset' not described
in 'drm_panfrost_mmap_bo'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251031054152.1406764-1-rdunlap@infradead.org
On bpf(BPF_PROG_LOAD) syscall user-supplied BPF programs are
translated by the verifier into "xlated" BPF programs. During this
process the original instructions offsets might be adjusted and/or
individual instructions might be replaced by new sets of instructions,
or deleted.
Add a new BPF map type which is aimed to keep track of how, for a
given program, the original instructions were relocated during the
verification. Also, besides keeping track of the original -> xlated
mapping, make x86 JIT to build the xlated -> jitted mapping for every
instruction listed in an instruction array. This is required for every
future application of instruction arrays: static keys, indirect jumps
and indirect calls.
A map of the BPF_MAP_TYPE_INSN_ARRAY type must be created with a u32
keys and value of size 8. The values have different semantics for
userspace and for BPF space. For userspace a value consists of two
u32 values – xlated and jitted offsets. For BPF side the value is
a real pointer to a jitted instruction.
On map creation/initialization, before loading the program, each
element of the map should be initialized to point to an instruction
offset within the program. Before the program load such maps should
be made frozen. After the program verification xlated and jitted
offsets can be read via the bpf(2) syscall.
If a tracked instruction is removed by the verifier, then the xlated
offset is set to (u32)-1 which is considered to be too big for a valid
BPF program offset.
One such a map can, obviously, be used to track one and only one BPF
program. If the verification process was unsuccessful, then the same
map can be re-used to verify the program with a different log level.
However, if the program was loaded fine, then such a map, being
frozen in any case, can't be reused by other programs even after the
program release.
Example. Consider the following original and xlated programs:
Original prog: Xlated prog:
0: r1 = 0x0 0: r1 = 0
1: *(u32 *)(r10 - 0x4) = r1 1: *(u32 *)(r10 -4) = r1
2: r2 = r10 2: r2 = r10
3: r2 += -0x4 3: r2 += -4
4: r1 = 0x0 ll 4: r1 = map[id:88]
6: call 0x1 6: r1 += 272
7: r0 = *(u32 *)(r2 +0)
8: if r0 >= 0x1 goto pc+3
9: r0 <<= 3
10: r0 += r1
11: goto pc+1
12: r0 = 0
7: r6 = r0 13: r6 = r0
8: if r6 == 0x0 goto +0x2 14: if r6 == 0x0 goto pc+4
9: call 0x76 15: r0 = 0xffffffff8d2079c0
17: r0 = *(u64 *)(r0 +0)
10: *(u64 *)(r6 + 0x0) = r0 18: *(u64 *)(r6 +0) = r0
11: r0 = 0x0 19: r0 = 0x0
12: exit 20: exit
An instruction array map, containing, e.g., instructions [0,4,7,12]
will be translated by the verifier to [0,4,13,20]. A map with
index 5 (the middle of 16-byte instruction) or indexes greater than 12
(outside the program boundaries) would be rejected.
The functionality provided by this patch will be extended in consequent
patches to implement BPF Static Keys, indirect jumps, and indirect calls.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251105090410.1250500-2-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The layout of bits within the individual tiles
(referred to as sectors in the
DRM_FORMAT_MOD_NVIDIA_BLOCK_LINEAR_2D() macro)
changed for 8 and 16-bit surfaces starting in
Blackwell 2 GPUs (With the exception of GB10).
To denote the difference, extend the sector field
in the parametric format modifier definition used
to generate modifier values for NVIDIA hardware.
Without this change, it would be impossible to
differentiate the two layouts based on modifiers,
and as a result software could attempt to share
surfaces directly between pre-GB20x and GB20x
cards, resulting in corruption when the surface
was accessed on one of the GPUs after being
populated with content by the other.
Of note: This change causes the
DRM_FORMAT_MOD_NVIDIA_BLOCK_LINEAR_2D() macro to
evaluate its "s" parameter twice, with the side
effects that entails. I surveyed all usage of the
modifier in the kernel and Mesa code, and that
does not appear to be problematic in any current
usage, but I thought it was worth calling out.
Fixes: 6cc6e08d45 ("drm/nouveau/kms: add support for GB20x")
Signed-off-by: James Jones <jajones@nvidia.com>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251030181153.1208-2-jajones@nvidia.com
The driver checks the firmware version during initialization.If preemption
is supported, the driver configures preemption accordingly and handles
userspace preemption requests. Otherwise, the driver returns an error for
userspace preemption requests.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251104185340.897560-1-lizhi.hou@amd.com
Introduce the new BLKREPORTZONESV2 ioctl command to allow user
applications access to the fast zone report implemented by
blkdev_report_zones_cached(). This new ioctl is defined as number 142
and is documented in include/uapi/linux/fs.h.
Unlike the existing BLKREPORTZONES ioctl, this new ioctl uses the flags
field of struct blk_zone_report also as an input. If the user sets the
BLK_ZONE_REP_CACHED flag as an input, then blkdev_report_zones_cached()
is used to generate the zone report using cached zone information. If
this flag is not set, then BLKREPORTZONESV2 behaves in the same manner
as BLKREPORTZONES and the zone report is generated by accessing the
zoned device.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The function blk_revalidate_zone_cond() already caches the condition of
all zones of a zoned block device in the zones_cond array of a gendisk.
However, the zone conditions are updated only when the device is scanned
or revalidated.
Implement tracking of the runtime changes to zone conditions using
the new cond field in struct blk_zone_wplug. The size of this structure
remains 112 Bytes as the new field replaces the 4 Bytes padding at the
end of the structure.
Beause zones that do not have a zone write plug can be in the empty,
implicit open, explicit open or full condition, the zones_cond array of
a disk is used to track the conditions, of zones that do not have a zone
write plug. The condition of such zone is updated in the disk zones_cond
array when a zone reset, reset all or finish operation is executed, and
also when a zone write plug is removed from the disk hash table when the
zone becomes full.
Since a device may automatically close an implicitly open zone when
writing to an empty or closed zone, if the total number of open zones
has reached the device limit, the BLK_ZONE_COND_IMP_OPEN and
BLK_ZONE_COND_CLOSED zone conditions cannot be precisely tracked. To
overcome this, the zone condition BLK_ZONE_COND_ACTIVE is introduced to
represent a zone that has the condition BLK_ZONE_COND_IMP_OPEN,
BLK_ZONE_COND_EXP_OPEN or BLK_ZONE_COND_CLOSED. This follows the
definition of an active zone as defined in the NVMe Zoned Namespace
specifications. As such, for a zoned device that has a limit on the
maximum number of open zones, we will never have more zones in the
BLK_ZONE_COND_ACTIVE condition than the device limit. This is compatible
with the SCSI ZBC and ATA ZAC specifications for SMR HDDs as these
devices do not have a limit on the number of active zones.
The function disk_zone_wplug_set_wp_offset() is modified to use the new
helper disk_zone_wplug_update_cond() to update a zone write plug
condition whenever a zone write plug write offset is updated on
submission or merging of write BIOs to a zone.
The functions blk_zone_reset_bio_endio(), blk_zone_reset_all_bio_endio()
and blk_zone_finish_bio_endio() are modified to update the condition of
the zones targeted by reset, reset_all and finish operations, either
using though disk_zone_wplug_set_wp_offset() for zones that have a
zone write plug, or using the disk_zone_set_cond() helper to update the
zones_cond array of the disk for zones that do not have a zone write
plug.
When a zone write plug is removed from the disk hash table (when the
zone becomes empty or full), the condition of struct blk_zone_wplug is
used to update the disk zones_cond array. Conversely, when a zone write
plug is added to the disk hash table, the zones_cond array is used to
initialize the zone write plug condition.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of iterating over all endpoints, under RCU read lock, just to
check if one of them as the fullmesh flag, we can keep a counter of
fullmesh endpoint, similar to what is done with the other flags.
This counter is now checked, before iterating over all endpoints.
Similar to the other counters, this new one is also exposed. A userspace
app can then know when it is being used in a fullmesh mode, with
potentially (too) many subflows.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251101-net-next-mptcp-fm-endp-nb-bind-v1-1-b4166772d6bb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Changing alignment of header would mean it's no longer safe to cast a
2 byte aligned pointer between formats. Use two 16 bit fields to make
it 2 byte aligned as previously.
This fixes the performance regression since
commit ("virtio_net: enable gso over UDP tunnel support.") as it uses
virtio_net_hdr_v1_hash_tunnel which embeds
virtio_net_hdr_v1_hash. Pktgen in guest + XDP_DROP on TAP + vhost_net
shows the TX PPS is recovered from 2.4Mpps to 4.45Mpps.
Fixes: 56a06bd40f ("virtio_net: enable gso over UDP tunnel support.")
Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://patch.msgid.link/20251031060551.126-1-jasowang@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend DRM_IOCTL_AMDXDNA_GET_INFO to include additional parameters
that allow collection of telemetry data.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251104062546.833771-3-lizhi.hou@amd.com
