- Correctly handle deeactivation of interrupts that were activated from
LRs. Since EOIcount only denotes deactivation of interrupts that
are not present in an LR, start EOIcount deactivation walk *after*
the last irq that made it into an LR.
- Avoid calling into the stubs to probe for ICH_VTR_EL2.TDS when
pKVM is already enabled -- not only thhis isn't possible (pKVM
will reject the call), but it is also useless: this can only
happen for a CPU that has already booted once, and the capability
will not change.
- Fix a couple of low-severity bugs in our S2 fault handling path,
affecting the recently introduced LS64 handling and the even more
esoteric handling of hwpoison in a nested context
- Address yet another syzkaller finding in the vgic initialisation,
where we would end-up destroying an uninitialised vgic with nasty
consequences
- Address an annoying case of pKVM failing to boot when some of the
memblock regions that the host is faulting in are not page-aligned
- Inject some sanity in the NV stage-2 walker by checking the limits
against the advertised PA size, and correctly report the resulting
faults
PPC:
- Fix a PPC e500 build error due to a long-standing wart that was exposed by
the recent conversion to kmalloc_obj(); rip out all the ugliness that
led to the wart.
RISC-V:
- Prevent speculative out-of-bounds access using array_index_nospec()
in APLIC interrupt handling, ONE_REG regiser access, AIA CSR access,
float register access, and PMU counter access
- Fix potential use-after-free issues in kvm_riscv_gstage_get_leaf(),
kvm_riscv_aia_aplic_has_attr(), and kvm_riscv_aia_imsic_has_attr()
- Fix potential null pointer dereference in kvm_riscv_vcpu_aia_rmw_topei()
- Fix off-by-one array access in SBI PMU
- Skip THP support check during dirty logging
- Fix error code returned for Smstateen and Ssaia ONE_REG interface
- Check host Ssaia extension when creating AIA irqchip
x86:
- Fix cases where CPUID mitigation features were incorrectly marked as
available whenever the kernel used scattered feature words for them.
- Validate _all_ GVAs, rather than just the first GVA, when processing
a range of GVAs for Hyper-V's TLB flush hypercalls.
- Fix a brown paper bug in add_atomic_switch_msr().
- Use hlist_for_each_entry_srcu() when traversing mask_notifier_list,
to fix a lockdep warning; KVM doesn't hold RCU, just irq_srcu.
- Ensure AVIC VMCB fields are initialized if the VM has an in-kernel local
APIC (and AVIC is enabled at the module level).
- Update CR8 write interception when AVIC is (de)activated, to fix a bug
where the guest can run in perpetuity with the CR8 intercept enabled.
- Add a quirk to skip the consistency check on FREEZE_IN_SMM, i.e. to allow
L1 hypervisors to set FREEZE_IN_SMM. This reverts (by default) an
unintentional tightening of userspace ABI in 6.17, and provides some
amount of backwards compatibility with hypervisors who want to freeze
PMCs on VM-Entry.
- Validate the VMCS/VMCB on return to a nested guest from SMM, because
either userspace or the guest could stash invalid values in memory
and trigger the processor's consistency checks.
Generic:
- Remove a subtle pseudo-overlay of kvm_stats_desc, which, aside from being
unnecessary and confusing, triggered compiler warnings due to
-Wflex-array-member-not-at-end.
- Document that vcpu->mutex is take outside of kvm->slots_lock and
kvm->slots_arch_lock, which is intentional and desirable despite being
rather unintuitive.
Selftests:
- Increase the maximum number of NUMA nodes in the guest_memfd selftest to
64 (from 8).
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmmy6n8UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNX7ggAhWoCG+AE6P3yrp6Mi+nRYpeRGC3q
q2IiZCn0UoCg6q3c2kgn7b/N2zLJs0Q8FZRCEp2Je+2uvptpmdp/BMEfiIU3n2/a
61z+Dydbpyc+kUmhJzUJ+aotq5FnMNmAAmqSKoc19GhAx2OQhQmBP/JOZ0P/eqLE
Is0qNBgr/Zms2ib3GFf/JT+urysL2mX47qe92HTzq1T9EEG0KleID0Jz8vYQI8Fr
I5N9+lTxagQDi8ytwOM85Cn8K7wh+CQIgzmciHcVErpAvAWkrEjrPlQltpEz2C5B
aWEcRgw46utEaAiwPQGJRW6TeoKUG0pUR3v6T90nBkjjJ1npm6gPVE6TBA==
=7nQ9
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Quite a large pull request, partly due to skipping last week and
therefore having material from ~all submaintainers in this one. About
a fourth of it is a new selftest, and a couple more changes are large
in number of files touched (fixing a -Wflex-array-member-not-at-end
compiler warning) or lines changed (reformatting of a table in the API
documentation, thanks rST).
But who am I kidding---it's a lot of commits and there are a lot of
bugs being fixed here, some of them on the nastier side like the
RISC-V ones.
ARM:
- Correctly handle deactivation of interrupts that were activated
from LRs. Since EOIcount only denotes deactivation of interrupts
that are not present in an LR, start EOIcount deactivation walk
*after* the last irq that made it into an LR
- Avoid calling into the stubs to probe for ICH_VTR_EL2.TDS when pKVM
is already enabled -- not only thhis isn't possible (pKVM will
reject the call), but it is also useless: this can only happen for
a CPU that has already booted once, and the capability will not
change
- Fix a couple of low-severity bugs in our S2 fault handling path,
affecting the recently introduced LS64 handling and the even more
esoteric handling of hwpoison in a nested context
- Address yet another syzkaller finding in the vgic initialisation,
where we would end-up destroying an uninitialised vgic with nasty
consequences
- Address an annoying case of pKVM failing to boot when some of the
memblock regions that the host is faulting in are not page-aligned
- Inject some sanity in the NV stage-2 walker by checking the limits
against the advertised PA size, and correctly report the resulting
faults
PPC:
- Fix a PPC e500 build error due to a long-standing wart that was
exposed by the recent conversion to kmalloc_obj(); rip out all the
ugliness that led to the wart
RISC-V:
- Prevent speculative out-of-bounds access using array_index_nospec()
in APLIC interrupt handling, ONE_REG regiser access, AIA CSR
access, float register access, and PMU counter access
- Fix potential use-after-free issues in kvm_riscv_gstage_get_leaf(),
kvm_riscv_aia_aplic_has_attr(), and kvm_riscv_aia_imsic_has_attr()
- Fix potential null pointer dereference in
kvm_riscv_vcpu_aia_rmw_topei()
- Fix off-by-one array access in SBI PMU
- Skip THP support check during dirty logging
- Fix error code returned for Smstateen and Ssaia ONE_REG interface
- Check host Ssaia extension when creating AIA irqchip
x86:
- Fix cases where CPUID mitigation features were incorrectly marked
as available whenever the kernel used scattered feature words for
them
- Validate _all_ GVAs, rather than just the first GVA, when
processing a range of GVAs for Hyper-V's TLB flush hypercalls
- Fix a brown paper bug in add_atomic_switch_msr()
- Use hlist_for_each_entry_srcu() when traversing mask_notifier_list,
to fix a lockdep warning; KVM doesn't hold RCU, just irq_srcu
- Ensure AVIC VMCB fields are initialized if the VM has an in-kernel
local APIC (and AVIC is enabled at the module level)
- Update CR8 write interception when AVIC is (de)activated, to fix a
bug where the guest can run in perpetuity with the CR8 intercept
enabled
- Add a quirk to skip the consistency check on FREEZE_IN_SMM, i.e. to
allow L1 hypervisors to set FREEZE_IN_SMM. This reverts (by
default) an unintentional tightening of userspace ABI in 6.17, and
provides some amount of backwards compatibility with hypervisors
who want to freeze PMCs on VM-Entry
- Validate the VMCS/VMCB on return to a nested guest from SMM,
because either userspace or the guest could stash invalid values in
memory and trigger the processor's consistency checks
Generic:
- Remove a subtle pseudo-overlay of kvm_stats_desc, which, aside from
being unnecessary and confusing, triggered compiler warnings due to
-Wflex-array-member-not-at-end
- Document that vcpu->mutex is take outside of kvm->slots_lock and
kvm->slots_arch_lock, which is intentional and desirable despite
being rather unintuitive
Selftests:
- Increase the maximum number of NUMA nodes in the guest_memfd
selftest to 64 (from 8)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (43 commits)
KVM: selftests: Verify SEV+ guests can read and write EFER, CR0, CR4, and CR8
Documentation: kvm: fix formatting of the quirks table
KVM: x86: clarify leave_smm() return value
selftests: kvm: add a test that VMX validates controls on RSM
selftests: kvm: extract common functionality out of smm_test.c
KVM: SVM: check validity of VMCB controls when returning from SMM
KVM: VMX: check validity of VMCS controls when returning from SMM
KVM: SVM: Set/clear CR8 write interception when AVIC is (de)activated
KVM: SVM: Initialize AVIC VMCB fields if AVIC is enabled with in-kernel APIC
KVM: x86: Introduce KVM_X86_QUIRK_VMCS12_ALLOW_FREEZE_IN_SMM
KVM: x86: Fix SRCU list traversal in kvm_fire_mask_notifiers()
KVM: VMX: Fix a wrong MSR update in add_atomic_switch_msr()
KVM: x86: hyper-v: Validate all GVAs during PV TLB flush
KVM: x86: synthesize CPUID bits only if CPU capability is set
KVM: PPC: e500: Rip out "struct tlbe_ref"
KVM: PPC: e500: Fix build error due to using kmalloc_obj() with wrong type
KVM: selftests: Increase 'maxnode' for guest_memfd tests
KVM: arm64: pkvm: Don't reprobe for ICH_VTR_EL2.TDS on CPU hotplug
KVM: arm64: vgic: Pick EOIcount deactivations from AP-list tail
KVM: arm64: Remove the redundant ISB in __kvm_at_s1e2()
...
Devlink instances without a backing device use bus_name
"devlink_index" and dev_name set to the decimal index string.
When user space sends this handle, detect the pattern and perform
a direct xarray lookup by index instead of iterating all instances.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260312100407.551173-6-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Each devlink instance has an internally assigned index used for xarray
storage. Expose it as a new DEVLINK_ATTR_INDEX uint attribute alongside
the existing bus_name and dev_name handle.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260312100407.551173-2-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The member is 'data', not 'opaque'.
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
UDP-Lite supports variable-length checksum and has two socket
options, UDPLITE_SEND_CSCOV and UDPLITE_RECV_CSCOV, to control
the checksum coverage.
Let's remove the support.
setsockopt(UDPLITE_SEND_CSCOV / UDPLITE_RECV_CSCOV) was only
available for UDP-Lite and returned -ENOPROTOOPT for UDP.
Now, the options are handled in ip_setsockopt() and
ipv6_setsockopt(), which still return the same error.
getsockopt(UDPLITE_SEND_CSCOV / UDPLITE_RECV_CSCOV) was available
for UDP and always returned 0, meaning full checksum, but now
-ENOPROTOOPT is returned.
Given that getsockopt() is meaningless for UDP and even the options
are not defined under include/uapi/, this should not be a problem.
$ man 7 udplite
...
BUGS
Where glibc support is missing, the following definitions
are needed:
#define IPPROTO_UDPLITE 136
#define UDPLITE_SEND_CSCOV 10
#define UDPLITE_RECV_CSCOV 11
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-10-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is kernel-doc warning for DRM_XE_VM_BIND_FLAG_DECOMPRESS:
./include/uapi/drm/xe_drm.h:1060: WARNING: Block quote ends without
a blank line; unexpected unindent.
Fix the warning by adding the missing '%' prefix to
DRM_XE_VM_BIND_FLAG_DECOMPRESS in the kernel-doc list entry for
struct drm_xe_vm_bind_op.
Fixes: 2270bd7124 ("drm/xe: add VM_BIND DECOMPRESS uapi flag")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603121515.gEMrFlTL-lkp@intel.com/
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260312160244.809849-2-nitin.r.gote@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Commit 94dfc73e7c ("treewide: uapi: Replace zero-length arrays with
flexible-array members") broke the userspace API for C++.
These structures ending in VLAs are typically a *header*, which can be
followed by an arbitrary number of entries. Userspace typically creates
a larger structure with some non-zero number of entries, for example in
QEMU's kvm_arch_get_supported_msr_feature():
struct {
struct kvm_msrs info;
struct kvm_msr_entry entries[1];
} msr_data = {};
While that works in C, it fails in C++ with an error like:
flexible array member 'kvm_msrs::entries' not at end of 'struct msr_data'
Fix this by using __DECLARE_FLEX_ARRAY() for the VLA, which uses [0]
for C++ compilation.
Fixes: 94dfc73e7c ("treewide: uapi: Replace zero-length arrays with flexible-array members")
Cc: stable@vger.kernel.org
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://patch.msgid.link/3abaf6aefd6e5efeff3b860ac38421d9dec908db.camel@infradead.org
[sean: tag for stable@]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a new keysym type KT_CSI that generates CSI tilde sequences with
automatic modifier encoding. The keysym value encodes the CSI parameter
number, producing sequences like ESC [ <value> ~ or ESC [ <value> ; <mod> ~
when Shift, Alt, or Ctrl modifiers are held.
This allows navigation keys (Home, End, Insert, Delete, PgUp, PgDn) and
function keys to generate modifier-aware escape sequences without
consuming string table entries for each modifier combination.
Define key symbols for navigation keys (K_CSI_HOME, K_CSI_END, etc.)
and function keys (K_CSI_F1 through K_CSI_F20) using standard xterm
CSI parameter values.
The modifier encoding follows the xterm convention:
mod = 1 + (shift ? 1 : 0) + (alt ? 2 : 0) + (ctrl ? 4 : 0)
Allowed CSI parameter values range from 0 to 99.
Note: The Linux console historically uses a non-standard double-bracket
format for F1-F5 (ESC [ [ A through ESC [ [ E) rather than the xterm
tilde format (ESC [ 11 ~ through ESC [ 15 ~). The K_CSI_F1 through
K_CSI_F5 definitions use the xterm format. Converting F1-F5 to KT_CSI
would require updating the "linux" terminfo entry to match. Navigation
keys and F6-F20 already use the tilde format and are fully compatible.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://patch.msgid.link/20260203045457.1049793-3-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for creating a mount namespace that contains only a copy of
the root mount from the caller's mount namespace, with none of the
child mounts. This is useful for containers and sandboxes that want to
start with a minimal mount table and populate it from scratch rather
than inheriting and then tearing down the full mount tree.
Two new flags are introduced:
- CLONE_EMPTY_MNTNS for clone3(), using the 64-bit flag space.
- UNSHARE_EMPTY_MNTNS for unshare(), reusing the
CLONE_PARENT_SETTID bit which has no meaning for unshare.
Both flags imply CLONE_NEWNS. For the unshare path,
UNSHARE_EMPTY_MNTNS is converted to CLONE_EMPTY_MNTNS in
unshare_nsproxy_namespaces() before it reaches copy_mnt_ns(), so the
mount namespace code only needs to handle a single flag.
In copy_mnt_ns(), when CLONE_EMPTY_MNTNS is set, clone_mnt() is used
instead of copy_tree() to clone only the root mount. The caller's root
and working directory are both reset to the root dentry of the new
mount.
The cleanup variables are changed from vfsmount pointers with
__free(mntput) to struct path with __free(path_put) because the empty
mount namespace path needs to release both mount and dentry references
when replacing the caller's root and pwd. In the normal (non-empty)
path only the mount component is set, and dput(NULL) is a no-op so
path_put remains correct there as well.
Link: https://patch.msgid.link/20260306-work-empty-mntns-consolidated-v1-1-6eb30529bbb0@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add FSMOUNT_NAMESPACE flag to fsmount() that creates a new mount
namespace with the newly created filesystem attached to a copy of the
real rootfs. This returns a namespace file descriptor instead of an
O_PATH mount fd, similar to how OPEN_TREE_NAMESPACE works for open_tree().
This allows creating a new filesystem and immediately placing it in a
new mount namespace in a single operation, which is useful for container
runtimes and other namespace-based isolation mechanisms.
The rootfs mount is created before copying the real rootfs for the new
namespace meaning that the mount namespace id for the mount of the root
of the namespace is bigger than the child mounted on top of it. We've
never explicitly given the guarantee for such ordering and I doubt
anyone relies on it. Accepting that lets us avoid copying the mount
again and also avoids having to massage may_copy_tree() to grant an
exception for fsmount->mnt->mnt_ns being NULL.
Link: https://patch.msgid.link/20260122-work-fsmount-namespace-v1-3-5ef0a886e646@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add a new VM_BIND flag, DRM_XE_VM_BIND_FLAG_DECOMPRESS, that lets userspace
express intent for the driver to perform on-device in-place decompression
for the GPU mapping created by a MAP bind operation.
This flag is used by subsequent driver changes to trigger scheduling of
GPU work that resolves compressed VRAM pages into an uncompressed PAT
VM mapping.
Behavior and semantics:
- Valid only for DRM_XE_VM_BIND_OP_MAP. IOCTLs using this flag on other ops
are rejected (-EINVAL).
- The bind's pat_index must select the device "no-compression" PAT entry;
otherwise the ioctl is rejected (-EINVAL).
- Only meaningful for VRAM-backed BOs on devices that support Flat CCS and
the required hardware generation (driver will return -EOPNOTSUPP if not).
- On success the driver schedules a migrate/resolve and installs the
returned dma_fence into the BO's kernel reservation
(DMA_RESV_USAGE_KERNEL).
Compute PR: https://github.com/intel/compute-runtime/pull/898
v3: Rebase on latest drm-tip and add compute pr info
v2: Add kernel doc (Matt)
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Mrozek, Michal <michal.mrozek@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260304123758.3050386-6-nitin.r.gote@intel.com
Add a new clone3() flag CLONE_PIDFD_AUTOKILL that ties a child's
lifetime to the pidfd returned from clone3(). When the last reference to
the struct file created by clone3() is closed the kernel sends SIGKILL
to the child. A pidfd obtained via pidfd_open() for the same process
does not keep the child alive and does not trigger autokill - only the
specific struct file from clone3() has this property.
This is useful for container runtimes, service managers, and sandboxed
subprocess execution - any scenario where the child must die if the
parent crashes or abandons the pidfd.
CLONE_PIDFD_AUTOKILL requires both CLONE_PIDFD (the whole point is tying
lifetime to the pidfd file) and CLONE_AUTOREAP (a killed child with no
one to reap it would become a zombie). CLONE_THREAD is rejected because
autokill targets a process not a thread.
The clone3 pidfd is identified by the PIDFD_AUTOKILL file flag set on
the struct file at clone3() time. The pidfs .release handler checks this
flag and sends SIGKILL via do_send_sig_info(SIGKILL, SEND_SIG_PRIV, ...)
only when it is set. Files from pidfd_open() or open_by_handle_at() are
distinct struct files that do not carry this flag. dup()/fork() share the
same struct file so they extend the child's lifetime until the last
reference drops.
CLONE_PIDFD_AUTOKILL uses a privilege model based on CLONE_NNP: without
CLONE_NNP the child could escalate privileges via setuid/setgid exec
after being spawned, so the caller must have CAP_SYS_ADMIN in its user
namespace. With CLONE_NNP the child can never gain new privileges so
unprivileged usage is allowed. This is a deliberate departure from the
pdeath_signal model which is reset during secureexec and commit_creds()
rendering it useless for container runtimes that need to deprivilege
themselves.
Link: https://patch.msgid.link/20260226-work-pidfs-autoreap-v5-3-d148b984a989@kernel.org
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add a new clone3() flag CLONE_NNP that sets no_new_privs on the child
process at clone time. This is analogous to prctl(PR_SET_NO_NEW_PRIVS)
but applied at process creation rather than requiring a separate step
after the child starts running.
CLONE_NNP is rejected with CLONE_THREAD. It's conceptually a lot simpler
if the whole thread-group is forced into NNP and not have single threads
running around with NNP.
Link: https://patch.msgid.link/20260226-work-pidfs-autoreap-v5-2-d148b984a989@kernel.org
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add a new clone3() flag CLONE_AUTOREAP that makes a child process
auto-reap on exit without ever becoming a zombie. This is a per-process
property in contrast to the existing auto-reap mechanism via
SA_NOCLDWAIT or SIG_IGN for SIGCHLD which applies to all children of a
given parent.
Currently the only way to automatically reap children is to set
SA_NOCLDWAIT or SIG_IGN on SIGCHLD. This is a parent-scoped property
affecting all children which makes it unsuitable for libraries or
applications that need selective auto-reaping of specific children while
still being able to wait() on others.
CLONE_AUTOREAP stores an autoreap flag in the child's signal_struct.
When the child exits do_notify_parent() checks this flag and causes
exit_notify() to transition the task directly to EXIT_DEAD. Since the
flag lives on the child it survives reparenting: if the original parent
exits and the child is reparented to a subreaper or init the child still
auto-reaps when it eventually exits.
CLONE_AUTOREAP can be combined with CLONE_PIDFD to allow the parent to
monitor the child's exit via poll() and retrieve exit status via
PIDFD_GET_INFO. Without CLONE_PIDFD it provides a fire-and-forget
pattern where the parent simply doesn't care about the child's exit
status. No exit signal is delivered so exit_signal must be zero.
CLONE_AUTOREAP is rejected in combination with CLONE_PARENT. If a
CLONE_AUTOREAP child were to clone(CLONE_PARENT) the new grandchild
would inherit exit_signal == 0 from the autoreap parent's group leader
but without signal->autoreap. This grandchild would become a zombie that
never sends a signal and is never autoreaped - confusing and arguably
broken behavior.
The flag is not inherited by the autoreap process's own children. Each
child that should be autoreaped must be explicitly created with
CLONE_AUTOREAP.
Link: https://github.com/uapi-group/kernel-features/issues/45
Link: https://patch.msgid.link/20260226-work-pidfs-autoreap-v5-1-d148b984a989@kernel.org
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The AMD PMF driver provides realtime column utilization (npu_busy)
metrics for the NPU. Extend the DRM_IOCTL_AMDXDNA_GET_INFO sensor
query to expose these metrics to userspace.
Add AMDXDNA_SENSOR_TYPE_COLUMN_UTILIZATION to the sensor type enum
and update aie2_get_sensors() to return both the total power and up
to 8 column utilization sensors if the user buffer permits.
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
[lizhi: support legacy tool which uses small buffer. checkpatch cleanup]
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260311171842.473453-1-lizhi.hou@amd.com
- Remove a subtle pseudo-overlay of kvm_stats_desc, which, aside from being
unnecessary and confusing, triggered compiler warnings due to
-Wflex-array-member-not-at-end.
- Document that vcpu->mutex is take outside of kvm->slots_lock and
kvm->slots_arch_lock, which is intentional and desirable despite being
rather unintuitive.
-----BEGIN PGP SIGNATURE-----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=bD3g
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-generic-7.0-rc3' of https://github.com/kvm-x86/linux into HEAD
KVM generic changes for 7.0
- Remove a subtle pseudo-overlay of kvm_stats_desc, which, aside from being
unnecessary and confusing, triggered compiler warnings due to
-Wflex-array-member-not-at-end.
- Document that vcpu->mutex is take outside of kvm->slots_lock and
kvm->slots_arch_lock, which is intentional and desirable despite being
rather unintuitive.
Similar to i915's commit cebc13de7e
("drm/i915: Whitelist COMMON_SLICE_CHICKEN3 for UMD access"), except
that instead of putting the register on the allowlist for UMD to
program, the KMD is doing the programming at context initialization
based on a queue creation flag.
This is a recommended tuning setting for both gen12 and Xe_HP
platforms.
If a render queue is created with
DRM_XE_EXEC_QUEUE_SET_STATE_CACHE_PERF_FIX, COMMON_SLICE_CHICKEN3 will
be programmed at initialization to enable the render color cache to
key with BTP+BTI (binding table pool + binding table entry) instead of
just BTI (binding table entry). This enables the UMD to avoid emitting
render-target-cache-flush + stall-at-pixel-scoreboard every time a
binding table entry pointing to a render target is changed.
v2: Use xe_lrc_write_ring()
v3: Update xe_query.c to report availability
v4: Rename defines to add DISABLE_
v5: update commit message
v6: rebase
Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/39982
Bspec: 73993, 73994, 72161, 31870, 68331
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patch.msgid.link/20260306075504.1288676-1-lionel.g.landwerlin@intel.com
This adds a function for retrieving the set of Locking objects enabled
for Single User Mode (SUM) and the value of the
RangeStartRangeLengthPolicy parameter.
It retrieves data from the LockingInfo table, specifically the
columns SingleUserModeRanges and RangeStartLengthPolicy, which
were added according to the TCG Opal Feature Set: Single User Mode,
as described in chapters 4.4.3.1 and 4.4.3.2.
Signed-off-by: Ondrej Kozina <okozina@redhat.com>
Reviewed-and-tested-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This ioctl is used to set up RLE (read lock enabled) and WLE (write
lock enabled) parameters of the Locking object.
In Single User Mode (SUM), if the RangeStartRangeLengthPolicy parameter
is set in the 'Reactivate' method, only Admin authority maintains the
locking range length and start (offset) attributes of Locking objects
set up for SUM. All other attributes from struct opal_user_lr_setup
(RLE - read locking enabled, WLE - write locking enabled) shall
remain in possession of the User authority associated with the Locking
object set for SUM.
With the IOC_OPAL_ENABLE_DISABLE_LR ioctl, the opal_user_lr_setup
members 'range_start' and 'range_length' of the ioctl argument are
ignored.
Signed-off-by: Ondrej Kozina <okozina@redhat.com>
Reviewed-and-tested-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This ioctl is used to set up locking range start (offset)
and locking range length attributes only.
In Single User Mode (SUM), if the RangeStartRangeLengthPolicy parameter
is set in the 'Reactivate' method, only Admin authority maintains the
locking range length and start (offset) attributes of Locking objects
set up for SUM. All other attributes from struct opal_user_lr_setup
(RLE - read locking enabled, WLE - write locking enabled) shall
remain in possession of the User authority associated with the Locking
object set for SUM.
Therefore, we need a separate function for setting up locking range
start and locking range length because it may require two different
authorities (and sessions) if the RangeStartRangeLengthPolicy attribute
is set.
With the IOC_OPAL_LR_SET_START_LEN ioctl, the opal_user_lr_setup
members 'RLE' and 'WLE' of the ioctl argument are ignored.
Signed-off-by: Ondrej Kozina <okozina@redhat.com>
Reviewed-and-tested-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This adds the 'Reactivate' method as described in the
"TCG Storage Opal SSC Feature Set: Single User Mode"
document (ch. 3.1.1.1).
The method enables switching an already active SED OPAL2 device,
with appropriate firmware support for Single User Mode (SUM),
to or from SUM.
Signed-off-by: Ondrej Kozina <okozina@redhat.com>
Reviewed-and-tested-by: Milan Broz <gmazyland@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add two fields pages_touched and pages_lost to the ring-buffer
meta-page. Those fields are useful to get the number of used pages in
the ring-buffer.
Link: https://patch.msgid.link/20260309162516.2623589-2-vdonnefort@google.com
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
One the things the user has always keep in mind is that any user
pointers they put into an SQE is not going to be read by the kernel
until submission happens, and the user has to ensure the pointee stays
alive until then. For example, snippet below will lead to UAF of the on
stack variable ts. Instead of passing the timeout value as a pointer
allow to store it immediately in the SQE. The user has to set a new flag
called IORING_TIMEOUT_IMMEDIATE_ARG, in which case sqe->addr for timeout
or sqe->addr2 for timeout update requests will be interpreted as a time
value in nanosecods.
void prep_timeout(struct io_uring_sqe *sqe) {
struct __kernel_timespec ts = {...};
prep_timeout(sqe, &ts);
}
void submit() {
sqe = get_sqe();
prep_timeout(sqe);
io_uring_submit();
}
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split out zcrx uapi into a separate file. It'll be easier to manage it
this way, and that reduces the size of a not so small io_uring.h. Since
there are users that expect that zcrx definitions come with io_uring.h,
it includes the new file.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
amdgpu:
- FAMS2 updates
- Refactor DC I2C
- Rework ttm handling to allow for multiple engines
- UserQ updates
- Ring reset improvements
- DC DCE 6.x cleanups
- DC support for NUTMEG and TRAVIS DP bridges
- Enable DC by default on CIK APUs
- Add DCN 4.2 support
- IPS fixes
- Overlay fixes for DCN4
- SDMA Limit updates
- Misc fixes
- RAS updates
- Register access callback rework
- GC 12.1 updates
amdkfd:
- Misc cleanups
UAPI:
- UserQ fence IOCTL parameter size fixes. The change is backwards compatible on LE, but not BE.
UserQs are still not considered stable and are disabled by default.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQgO5Idg2tXNTSZAr293/aFa7yZ2AUCaaikJwAKCRC93/aFa7yZ
2CklAQDWTLGzAuei2qob6wV4dcbxi+8eIB7uy4wzppMYen7WkgEA9oChRFo8eOAo
SAlAx59UnuGYDEdQTlQUfP/1BSLZ6AM=
=Cvp8
-----END PGP SIGNATURE-----
Merge tag 'amd-drm-next-7.1-2026-03-04' of https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-7.1-2026-03-04:
amdgpu:
- FAMS2 updates
- Refactor DC I2C
- Rework ttm handling to allow for multiple engines
- UserQ updates
- Ring reset improvements
- DC DCE 6.x cleanups
- DC support for NUTMEG and TRAVIS DP bridges
- Enable DC by default on CIK APUs
- Add DCN 4.2 support
- IPS fixes
- Overlay fixes for DCN4
- SDMA Limit updates
- Misc fixes
- RAS updates
- Register access callback rework
- GC 12.1 updates
amdkfd:
- Misc cleanups
UAPI:
- UserQ fence IOCTL parameter size fixes. The change is backwards compatible on LE, but not BE.
UserQs are still not considered stable and are disabled by default.
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260304213233.1938311-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
This patch supports application allocated memory for CQs.
The application allocates and manages the CQs directly. To support
this, the driver exports a new comp_mask to indicate direct control
of the CQ. When this comp_mask bit is set in the ureq, the driver
maps this application allocated CQ memory into hardware. As the
application manages this memory, the CQ depth ('cqe') passed by it
must be used as is and the driver shouldn't update it.
For CQs, ib_core supports pinning dmabuf based application memory,
specified through provider attributes. This umem is mananged by the
ib_core and is available in ib_cq. Register 'create_cq_user' devop
to process this umem. The driver also supports the legacy interface
that allocates umem internally.
Link: https://patch.msgid.link/r/20260302110036.36387-7-sriharsha.basavapatna@broadcom.com
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Some applications may need multiple doorbells to support parallel
processing of threads that each operate on a group of resources.
The following uapi methods have been implemented in this patch.
- BNXT_RE_METHOD_DBR_ALLOC:
This will allow the appliation to create extra doorbell regions
and use the associated doorbell page index in CREATE_QP and
use the associated DB address while ringing the doorbell.
- BNXT_RE_METHOD_DBR_FREE:
Free the allocated doorbell region.
- BNXT_RE_METHOD_GET_DEFAULT_DBR:
Return the default doorbell page index and doorbell page address
associated with the ucontext.
Link: https://patch.msgid.link/r/20260302110036.36387-4-sriharsha.basavapatna@broadcom.com
Co-developed-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This flag can be set by drivers once they have finished auditing and
implementing the full udata support on every udata operation.
My intention going forward is that driver authors proposing new udata uAPI
for their drivers must first do the work and set this flag.
If this flag is not set the userspace should not try to use udata based
uAPI newer than this commit, though on a case by case basis it may be OK
based on what checks historical kernels performed on the specific call.
Since bnxt_re is audited now, it is the first driver to set the flag.
Link: https://patch.msgid.link/r/13-v3-bd56dd443069+49-bnxt_re_uapi_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
inet_sk_diag_fill() populates r->idiag_timer with the following
precedence order:
1 - Retransmit timer.
4 - Probe0 timer.
2 - Keepalive timer.
This patch adds a new value, last in the list, if other timers
are not active.
5 - Delayed ACK timer.
A corresponding iproute2 patch will follow to replace "unknown"
with "delack":
ESTAB 10 0 [2002:a05:6830:1f86::]:12875 [2002:a05:6830:1f85::]:50438
timer:(unknown,003ms,0) ino:152178 sk:3004 cgroup:unreachable:189 <->
skmem:(r1344,rb12780520,t0,tb262144,f2752,w0,o250,bl0,d0) ts usec_ts
...
Also add the following enum in uapi/linux/inet_diag.h
as suggested by David Ahern.
enum {
IDIAG_TIMER_OFF,
IDIAG_TIMER_ON,
IDIAG_TIMER_KEEPALIVE,
IDIAG_TIMER_TIMEWAIT,
IDIAG_TIMER_PROBE0,
IDIAG_TIMER_DELACK,
};
Neal Cardwell suggested to test for ICSK_ACK_TIMER:
inet_csk_clear_xmit_timer() does not call sk_stop_timer()
because INET_CSK_CLEAR_TIMERS is unset.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260305114829.2163276-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmmqPTAQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpueIEACHF0uws+uZSEsy9LUyC9ha8+5YN9szIJ3K
QUGxa9pmCnQG5K50KpxyEYP6buaJDy1smJGgD2obkeGncC4w6xKK2kQTQV1U+C1C
YA+7B/3HLhz5AWS6GIbRy6VZ599I4evlF8W79dX8BTnF8Y1ddkSuUnKx//q0AoQZ
hr3foglcFlchy8JuQ2/MpxzfOouvNMdMmeUN4O+t8iXDrmePFYIOgrLcT+ObgC5D
SXWx2cc3hMJ35hcSzedMWEBFcXnkX9nfh8Hd/+uPRcKsIwS8kCo6z01GoT/BCPRA
jdrxAfoYSL16HPfq6GU52n6iCaRd+5NK+tt/ECCzTxGL32Hadrr+nxw4O7g3Q96u
07zeaqHSoTGUchtlqrGjALQLP2yxdACEjxMh3rfdStRv3x3bbbVVDdioVEzPukCr
EBA+AbqaaG3LIYXwcY+15zx5NrAfeBAP1RjLgoV0s2ch4ghEqvnZGY4NLBDkcQ2R
97tM9+OdecBrsnlQr5GBoDbwpqc2pDEqSjkYDwoXqvqXs0DrMRq2MQw1Hjjh7Z7G
FZx1KNTiLB/YQ0sSyMcUKnH+qBA0FxwN/C6dDnRjj4dH5YsoeG/GhsS3B00a+0yE
S3MKrsf+uN21OYLVPSTEN6qS+02ZvK6E/Aw7/fk2IV60JMeM5KvCccmxa53dKls8
iyEJ7nVLOg==
=xyKA
-----END PGP SIGNATURE-----
Merge tag 'io_uring-7.0-20260305' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Fix a typo in the mock_file help text
- Fix a comment regarding IORING_SETUP_TASKRUN_FLAG in the
io_uring.h UAPI header
- Use READ_ONCE() for reading refill queue entries
- Reject SEND_VECTORIZED for fixed buffer sends, as it isn't
implemented. Currently this flag is silently ignored
This is in preparation for making these work, but first we
need a fixup so that older kernels will correctly reject them
- Ensure "0" means default for the rx page size
* tag 'io_uring-7.0-20260305' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/zcrx: use READ_ONCE with user shared RQEs
io_uring/mock: Fix typo in help text
io_uring/net: reject SEND_VECTORIZED when unsupported
io_uring: correct comment for IORING_SETUP_TASKRUN_FLAG
io_uring/zcrx: don't set rx_page_size when not requested
for amdxdna, a DSI clock rate fix for rz-du, a uapi fix for syncobj, a
possible build failure fix for dma-buf, a doc warning fix for sched, a
build failure fix for ttm tests, and a crash fix when suspended for
nouveau.
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCaak6GgAKCRAnX84Zoj2+
dkHpAX91/gbgY5FDu7va/7Ybo3oH/YvZOIQsbOz0sfJsjnszyKT3Wh4MGM8QphlI
93YHoi8Bf2M++H1mQgFrm97kjISmjgZYufM+6Cy92oqMO/SKCxiHTCBRnTBxas1B
CXek10L1Pg==
=jxDJ
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2026-03-05' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A return type fix for ttm, a display fix for solomon, several misc fixes
for amdxdna, a DSI clock rate fix for rz-du, a uapi fix for syncobj, a
possible build failure fix for dma-buf, a doc warning fix for sched, a
build failure fix for ttm tests, and a crash fix when suspended for
nouveau.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20260305-ludicrous-quirky-raven-7cdafd@houat
Fix various coding style issues across the audit subsystem flagged
by checkpatch.pl script to adhere to kernel coding standards.
Specific changes include:
- kernel/auditfilter.c: Move the open brace '{' to the previous line
for the audit_ops array declaration.
- lib/audit.c: Add a required space before the open parenthesis '('.
- include/uapi/linux/audit.h: Enclose the complex macro value for
AUDIT_UID_UNSET in parentheses.
Signed-off-by: Ricardo Robaina <rrobaina@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Introduces the DRM RAS infrastructure over generic netlink.
The new interface allows drivers to expose RAS nodes and their
associated error counters to userspace in a structured and extensible
way. Each drm_ras node can register its own set of error counters, which
are then discoverable and queryable through netlink operations. This
lays the groundwork for reporting and managing hardware error states
in a unified manner across different DRM drivers.
Currently it only supports error-counter nodes. But it can be
extended later.
The registration is also not tied to any drm node, so it can be
used by accel devices as well.
It uses the new and mandatory YAML description format stored in
Documentation/netlink/specs/. This forces a single generic netlink
family namespace for the entire drm: "drm-ras".
But multiple-endpoints are supported within the single family.
Any modification to this API needs to be applied to
Documentation/netlink/specs/drm_ras.yaml before regenerating the
code:
$ tools/net/ynl/pyynl/ynl_gen_c.py --spec \
Documentation/netlink/specs/drm_ras.yaml --mode uapi --header \
-o include/uapi/drm/drm_ras.h
$ tools/net/ynl/pyynl/ynl_gen_c.py --spec \
Documentation/netlink/specs/drm_ras.yaml --mode kernel \
--header -o drivers/gpu/drm/drm_ras_nl.h
$ tools/net/ynl/pyynl/ynl_gen_c.py --spec \
Documentation/netlink/specs/drm_ras.yaml \
--mode kernel --source -o drivers/gpu/drm/drm_ras_nl.c
Cc: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: netdev@vger.kernel.org
Co-developed-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/20260304074412.464435-8-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cross-merge networking fixes after downstream PR (net-7.0-rc3).
No conflicts.
Adjacent changes:
net/netfilter/nft_set_rbtree.c
fb7fb40163 ("netfilter: nf_tables: clone set on flush only")
3aea466a43 ("netfilter: nft_set_rbtree: don't disable bh when acquiring tree lock")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ETHTOOL_PFC_PREVENTION_TOUT enables the configuration of timeout value
for PFC storm prevention. This can also be used to configure storm
detection timeout for global pause settings. In fact some existing
drivers are already using it for the said purpose.
Highlight that the knob can formally be used to configure timeout
value for pause storm prevention mechanism. The update to the ethtool
man page will follow afterwards.
Link: https://lore.kernel.org/aa5f189a-ac62-4633-97b5-ebf939e9c535@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20260302230149.1580195-3-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
With TX pause enabled, if a device is unable to pass packets up to the
stack (e.g., CPU is hanged), the device can cause pause storm. Given
that devices can have native support to protect the neighbor from such
flooding, such events need some tracking. This support is to track TX
pause storm events for better observability.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20260302230149.1580195-2-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Extend the VAR allocation UAPI to accept an optional flags attribute,
allowing userspace to request TLP VAR allocation via the
MLX5_IB_UAPI_VAR_ALLOC_FLAG_TLP flag.
When the TLP flag "MLX5_IB_UAPI_VAR_ALLOC_FLAG_TLP" is specified,
the driver selects the TLP VAR region for allocation instead of the
regular VirtIO VAR region.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
This series adds support for Transaction Layer Packet (TLP) emulation
response gateway regions, enabling userspace device emulation software
to write TLP responses directly to lower layers without kernel driver
involvement.
Currently, the mlx5 driver exposes VirtIO emulation access regions via
the MLX5_IB_METHOD_VAR_OBJ_ALLOC ioctl. This series extends that
ioctl to also support allocating TLP response gateway channels for
PCI device emulation use cases.
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Allow netlink users, through the usage of driver-details netlink
attribute, to get information about internal FRMR pools that use the
kernel_vendor_key FRMR key member.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260226-frmr_pools-v4-11-95360b54f15e@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Allow users to set through netlink, for a specific FRMR pool, the amount
of handles that are not aged, and fill the pool to this amount.
This allows users to warm-up the FRMR pools to an expected amount of
handles with specific attributes that fits their expected usage.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260226-frmr_pools-v4-10-95360b54f15e@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Fix some kernel-doc warnings in openvswitch.h:
Mark enum placeholders that are not used as "private" so that kernel-doc
comments are not needed for them.
Correct names for 2 enum values:
Warning: include/uapi/linux/openvswitch.h:300 Excess enum value
'@OVS_VPORT_UPCALL_SUCCESS' description in 'ovs_vport_upcall_attr'
Warning: include/uapi/linux/openvswitch.h:300 Excess enum value
'@OVS_VPORT_UPCALL_FAIL' description in 'ovs_vport_upcall_attr'
Convert one comment from "/**" kernel-doc to a plain C "/*" comment:
Warning: include/uapi/linux/openvswitch.h:638 This comment starts with
'/**', but isn't a kernel-doc comment.
* Omit attributes for notifications.
Add more kernel-doc:
- add kernel-doc for kernel-only enums;
- add missing kernel-doc for enum ovs_datapath_attr;
- add missing kernel-doc for enum ovs_flow_attr;
- add missing kernel-doc for enum ovs_sample_attr;
- add kernel-doc for enum ovs_check_pkt_len_attr;
- add kernel-doc for enum ovs_action_attr;
- add kernel-doc for enum ovs_action_push_eth;
- add kernel-doc for enum ovs_vport_attr;
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/20260304012437.469151-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
