There's not much here that we can't get at through alternate means (aside
from the TLB contents, but that doesn't belong here anyways). Most of
this information is already provided by the sh32 routines, which we'll
consolidate on next.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This switches over from the special-casing that sh64 had and to the model
that's being employed for sh32.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Allocate memory, region, remap and irq for device state using
devm_* helpers to simplify memory accounting.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
pl330_update() stores a pointer to the thrd->req that finished, which
contains a pointer to the corresponding pl330_req. This is done with
the pl330_lock held. Then, it iterates through the req_done list,
calling the callback for each of the requests that are done. The
problem is that the driver releases the lock before calling the
callback for each of the callbacks. pl330_submit_req() running in
another processor can then acquire the lock and insert another request
in one of the thrd->req that hasn't been processed yet, replacing the
pointer to pl330_req there. When the callback returns in
pl330_update() and the next rqdone is popped from the list, it
dereferences the pl330_req pointer to the just scheduled pl330_req,
instead of the one that has finished, calling pl330 with the wrong r.
This patch fixes this by storing the pointer to pl330_req directly in
the list.
Signed-off-by: Javi Merino <javi.merino@arm.com>
Cc: Jassi Brar <jaswinder.singh@linaro.org>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
Rename serpent-avx assembler functions so that they do not collide with
serpent-sse2 assembler functions when linking both versions in to same
kernel image.
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Johannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de>
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch changes u8 in struct arc4_ctx and variables to u32 (as AMD seems
to have problem with u8 array). Below are tcrypt results of old 1-byte block
cipher versus ecb(arc4) with u8 and ecb(arc4) with u32.
tcrypt results, x86-64 (speed ratios: new-u32/old, new-u8/old):
u32 u8
AMD Phenom II : x3.6 x2.7
Intel Core 2 : x2.0 x1.9
tcrypt results, i386 (speed ratios: new-u32/old, new-u8/old):
u32 u8
Intel Atom N260 : x1.5 x1.4
Cc: Jon Oberheide <jon@oberheide.org>
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently arc4.c provides simple one-byte blocksize cipher which is wrapped
by ecb() module, giving function call overhead on every encrypted byte. This
patch adds ecb(arc4) directly into arc4.c for higher performance.
tcrypt results (speed ratios: new/old):
AMD Phenom II, x86-64 : x2.7
Intel Core 2, x86-64 : x1.9
Intel Atom N260, i386 : x1.4
Cc: Jon Oberheide <jon@oberheide.org>
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
"acpi_pad/%d" is a better thread name than
generic "power_saving/%d" because users who see
these threads will know the name of the driver
that caused them.
Signed-off-by: Len Brown <len.brown@intel.com>
Commit 98971f8439 ("crypto: s390 - cleanup
DES code") should have also removed crypto_des.h. That file is unused
and unneeded since that commit. So let's clean up that file too.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Its observed with some PHY, the 60Mhz clock gets
cut too soon for OMAP EHCI, leaving OMAP-EHCI in a bad state.
So on starting port suspend, make sure the 60Mhz clock to EHCI
is kept alive using an internal clock, so that EHCi can cleanly
transition its hw state machine on a port suspend.
Its not proven if this is the issue hit on USB3333,
but the symptoms look very similar.
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Volodymyr Mieshkov <x0182794@ti.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ohci_finish_controller_resume() is intended to be used in platform specific
drivers ohci-*.c, included from ohci-hcd.c. Some of them don't actually use
ohci_finish_controller_resume(), so mark it as __maybe_unused.
Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The use of kfree(serial) in error cases of usb_serial_probe
was invalid - usb_serial structure allocated in create_serial()
gets reference of usb_device that needs to be put, so we need
to use usb_serial_put() instead of simple kfree().
Signed-off-by: Jan Safrata <jan.nikitenko@gmail.com>
Acked-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes the following warning:
In file included from drivers/usb/host/ehci-hcd.c:1246:0:
drivers/usb/host/ehci-xilinx-of.c:293:2: warning: initialization from incompatible pointer type [enabled by default]
drivers/usb/host/ehci-xilinx-of.c:293:2: warning: (near initialization for 'ehci_hcd_xilinx_of_driver.shutdown') [enabled by default]
Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit aaa0ef289a "PS3 EHCI QH
read work-around", Terratec Grabby (em28xx) stopped working with AMD
Geode LX 800 (USB controller AMD CS5536). Since this is a PS3 only
fix, the following patch adds a conditional block around it.
Signed-off-by: Ricardo Martins <rasm@fe.up.pt>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hi Greg,
Here's five bug fixes for 3.5. They fix some memory leaks in the
bandwidth calculation code, fix a couple bugs in the USB3 Link PM
patchset, and make system suspend and resume work on platforms with the
AsMedia ASM1042 xHCI host controller.
Sarah Sharp
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAABAgAGBQJP2SkLAAoJEBMGWMLi1Gc5J08P/3+jxbPAC49miW8QXau993Ud
Ng8glY9hSavl06mLzf63Eke2SnQNJ9cq+FaqVyYOX5AVcNRCcgsyqJpllF2Eu8iU
e6Icomst4m1Jmk/38CSEo+eL3fBME4cfhT9zhzmR2dhJnzGx4HnCmAh8I+TqvGSy
osXWq0RQ6k6yUSBLH+nKeeCY1Nn4QYyBI1Ix4jKDKiZQSAfd1ppzh8bszOTFSE9b
y9BoB6lWVO7xnbofOlD+SqSSd8TLg9nyTekp2iVRLzY9Df83Xn8+Vu2YYJCJGB4V
1bLemY4hwP//TBAf45/KLDluIJb+JJ/Dzwa+W0YiogeD8munL8G21biXayB4G/11
rLnbHxmvBn/DC7s+aT2ie++Cn97ZV+WJW4p9x2hYnMJayukzV9+GqF4F+uD55NP7
WtfvIgmc4H4qAX2wEAYyJRUAL+tfGsBDjr/ItKiKaj15xsN2YPEE3fFx0s8Ht46M
aRQN1AJghK1MD/pQHRm9uP4GB3lZtcKwMgpkT7cYsXaBtf1Fn3VfHExpuZ4bvFNB
I+6B+WVF5PE//h+fdB1GGvLKv2FTR1DjvU6+tVv5KnBAm4Vmfnw+vrqMhG8KMZpF
NEVmiTN53tMyLC9ez7uBgzwVARE4RbqdiWHJIjj8CEjkbknDe0+keYBZ2egoQW6d
olNSuH3khQ/hoRYutqcK
=oodF
-----END PGP SIGNATURE-----
Merge tag 'for-usb-linus-2012-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus
xhci: Bug fixes for 3.5
Hi Greg,
Here's five bug fixes for 3.5. They fix some memory leaks in the
bandwidth calculation code, fix a couple bugs in the USB3 Link PM
patchset, and make system suspend and resume work on platforms with the
AsMedia ASM1042 xHCI host controller.
Sarah Sharp
Changed setting the status bits to a byte-oriented approach. Number of
written status bits is now based on VHCI_NPORT, instead of casting
status buffer to a long. This fixes a stack corruption bug on 64-bit
based architectures, and potential byte order / endianness related
issues.
In addition updated function comments, and log statements.
Signed-off-by: Bart Westgeest <bart@elbrys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes an uninitialized variable warning in
alloc_zspage(). It also fixes the secondary issue of
prev_page leaving scope on each loop iteration. The only
reason this ever worked was because prev_page was occupying
the same space on the stack on each iteration.
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add whitespace to the _8255_* defines to improve readability.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The name 'do_config' is pretty generic, and this function is the
only one in this driver without namespace. Add namespace to it
just to avoid any issues.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The subdev_8255_interrupt function indirectly calls subdev_8255_io.
For aesthetic reasons, move the subdev_8255_io function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor the subdev_8255_insn function to follow what the user
space library is doing.
1) This function requires 'data' to contain 2 parameters. Add a
sanity check for this (insn->n != 2).
2) The 'data' parameters are actually a 'mask' of the valid bits and
the actual 'bits' to modify. Create local variables of these names
to help with maintainability.
3) The value returned in data[1] reflects the actual state of the
8255 io pins after the update of the masked bits. Fetch this data
in a local variable and then set data[1].
4) The user space library only checks for a < 0 return to indicate
an error. It appears that the 'return 2' in this function is supposed
to indicate the number of data parameters used to perform the command.
Return the insn->n value for this, the open coded '2' looks wrong.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Iam Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To improve readability, use a locale variable to hold the 8255's
private iobase value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The initialization of the 8255 subdevice can fail. Make sure to
check for it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The have_irq variable in the 8255 private data is not used by the driver,
remove it. This removes the need to access the private data in the
subdev_8255_init_irq function.
Also, add a bit of whitespace to improve the readability.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor the initialization of the 8255 so that the private data
allocation is done before the subdevice is setup. This makes sure
that the setup is complete.
Also, add a bit of whitespace to improve the readability.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Push out the rename of the private variables to improve the readability
of the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 8255's private data variables cb_arg and cb_func are actually
the iobase for the 8255 device and the pointer to the io function
to access the device. Rename them as such to improve the readability
of the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The macros CALLBACK_ARG, CALLBACK_FUNC, and subdevpriv all rely
on a a local variable having a specific name. Replace the macros
with local variables wherever they occur.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the 8255's private data structure from subdev_8255_struct
to subdev_8255_private.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of accessing the dev->subdevices directly as an array,
use a pointer. This method is more common in the comedi subsystem.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the printk calls with dev_info, dev_warn, etc.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch replaces some of the XGI internal structs by their
counterparts in the SiS driver.
XGI330_LVDSDataStruct -> SiS_LVDSData
XGI330_LCDDataStruct -> SiS_LCDData
XGI330_CHTVDataStruct -> SiS_LVDSData
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For TV Devices:
The values taken from XGI_TVDelayList are always overwritten with the
values from XGI_TVDelayList2 since the if condition for using the values
from XGI_TVDelayList2 is identical with the check to enter this scope and
thus always true.
The delay values in XGI_TVDelayList2 is always 0x22 so we
can simply replace it with this constant value.
For LCD Devices:
The LCD_DelayCompensation field is always set to 0x12 so we can simply
replace this field with a constant value.
This saves about 500 bytes in compiled size.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since XGI_CloseCRTC does not perform anything useful we can simply
remove it.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch simplyfies the XGI_GetVCLK2Ptr a bit by moving the +=25 to
a define and removing statements without effect.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the arrays in XGI_GetVCLK2Ptr which each contain only
one value four times and replaces them with their constant value.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the first three entries in XGINew_DDRDRAM_TYPE{340,20} are never
used, we can simply remove them;
and instead of passing XGINew_DDRDRAM_TYPE with an index we can simply
pass the value directly to XGINew_SetDRAMSize20Reg.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the function XGINew_SetDRAMSizingType is only called from one
location and consist only of 2 valuable lines we can simply inline it
here.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since XGINew_SetDRAMSize20Reg now handles both cases we can remove
the code duplication in XGINew_DDRSizing340.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch consolidates the almost identical functions
XGINew_SetDRAMSizeReg and XGINew_SetDRAMSize20Reg as they are
implemented identically except one division factor.
The changed factor is now reflected in the input data.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes all unnecessary, redundant and superfluous header
includes from xgifb.
Tested on hp t5325 (XGI Z11)
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds a simple #include guard to vb_table.h
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds a mutex for fb_mmap around smem_start and smem_len
so the mutex inside the fb_mmap() is actually used. Changing of
these fields before calling the framebuffer_register() are not mutexed.
We check whether framebuffer_register has been called by reading
fbinfo->count.
See 537a1bf0 - "fbdev: add mutex for fb_mmap locking" by Krzysztof Helt
for details.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes assignments to the fb_fix_screeninfo struct which are
overwritten by the memset in XGIfb_get_fix() a few lines later.
Since the name/id might be useful this was moved to XGIfb_get_fix().
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All the functionality is now supported by pstore and pstore_ram drivers.
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Colin Cross <ccross@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having automatic updates seems pointless for production system, and
even dangerous and thus counter-productive:
1. If we can mount pstore, or read files, we can as well read
/proc/kmsg. So, there's little point in duplicating the
functionality and present the same information but via another
userland ABI;
2. Expecting the kernel to behave sanely after oops/panic is naive.
It might work, but you'd rather not try it. Screwed up kernel
can do rather bad things, like recursive faults[1]; and pstore
rather provoking bad things to happen. It uses:
1. Timers (assumes sane interrupts state);
2. Workqueues and mutexes (assumes scheduler in a sane state);
3. kzalloc (a working slab allocator);
That's too much for a dead kernel, so the debugging facility
itself might just make debugging harder, which is not what
we want.
Maybe for non-oops message types it would make sense to re-enable
automatic updates, but so far I don't see any use case for this.
Even for tracing, it has its own run-time/normal ABI, so we're
only interested in pstore upon next boot, to retrieve what has
gone wrong with HW or SW.
So, let's disable the updates by default.
[1]
BUG: unable to handle kernel paging request at fffffffffffffff8
IP: [<ffffffff8104801b>] kthread_data+0xb/0x20
[...]
Process kworker/0:1 (pid: 14, threadinfo ffff8800072c0000, task ffff88000725b100)
[...
Call Trace:
[<ffffffff81043710>] wq_worker_sleeping+0x10/0xa0
[<ffffffff813687a8>] __schedule+0x568/0x7d0
[<ffffffff8106c24d>] ? trace_hardirqs_on+0xd/0x10
[<ffffffff81087e22>] ? call_rcu_sched+0x12/0x20
[<ffffffff8102b596>] ? release_task+0x156/0x2d0
[<ffffffff8102b45e>] ? release_task+0x1e/0x2d0
[<ffffffff8106c24d>] ? trace_hardirqs_on+0xd/0x10
[<ffffffff81368ac4>] schedule+0x24/0x70
[<ffffffff8102cba8>] do_exit+0x1f8/0x370
[<ffffffff810051e7>] oops_end+0x77/0xb0
[<ffffffff8135c301>] no_context+0x1a6/0x1b5
[<ffffffff8135c4de>] __bad_area_nosemaphore+0x1ce/0x1ed
[<ffffffff81053156>] ? ttwu_queue+0xc6/0xe0
[<ffffffff8135c50b>] bad_area_nosemaphore+0xe/0x10
[<ffffffff8101fa47>] do_page_fault+0x2c7/0x450
[<ffffffff8106e34b>] ? __lock_release+0x6b/0xe0
[<ffffffff8106bf21>] ? mark_held_locks+0x61/0x140
[<ffffffff810502fe>] ? __wake_up+0x4e/0x70
[<ffffffff81185f7d>] ? trace_hardirqs_off_thunk+0x3a/0x3c
[<ffffffff81158970>] ? pstore_register+0x120/0x120
[<ffffffff8136a37f>] page_fault+0x1f/0x30
[<ffffffff81158970>] ? pstore_register+0x120/0x120
[<ffffffff81185ab8>] ? memcpy+0x68/0x110
[<ffffffff8115875a>] ? pstore_get_records+0x3a/0x130
[<ffffffff811590f4>] ? persistent_ram_copy_old+0x64/0x90
[<ffffffff81158bf4>] ramoops_pstore_read+0x84/0x130
[<ffffffff81158799>] pstore_get_records+0x79/0x130
[<ffffffff81042536>] ? process_one_work+0x116/0x450
[<ffffffff81158970>] ? pstore_register+0x120/0x120
[<ffffffff8115897e>] pstore_dowork+0xe/0x10
[<ffffffff81042594>] process_one_work+0x174/0x450
[<ffffffff81042536>] ? process_one_work+0x116/0x450
[<ffffffff81042e13>] worker_thread+0x123/0x2d0
[<ffffffff81042cf0>] ? manage_workers.isra.28+0x120/0x120
[<ffffffff81047d8e>] kthread+0x8e/0xa0
[<ffffffff8136ba74>] kernel_thread_helper+0x4/0x10
[<ffffffff8136a199>] ? retint_restore_args+0xe/0xe
[<ffffffff81047d00>] ? __init_kthread_worker+0x70/0x70
[<ffffffff8136ba70>] ? gs_change+0xb/0xb
Code: be e2 00 00 00 48 c7 c7 d1 2a 4e 81 e8 bf fb fd ff 48 8b 5d f0 4c 8b 65 f8 c9 c3 0f 1f 44 00 00 48 8b 87 08 02 00 00 55 48 89 e5 <48> 8b 40 f8 5d c3 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00
RIP [<ffffffff8104801b>] kthread_data+0xb/0x20
RSP <ffff8800072c1888>
CR2: fffffffffffffff8
---[ end trace 996a332dc399111d ]---
Fixing recursive fault but reboot is needed!
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
