We need this thing much earlier, and it doesn't make sense
in the hw enabling function intel_enable_gtt - this does not
change over a suspend/resume cycle ...
Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
To be able to directly set up the intel-gtt code from drm/i915 and
avoid setting up the fake-agp driver we need to prepare a few things:
- pass both the bridge and gpu pci_dev to the probe function and add
code to handle the gpu pdev both being present (for drm/i915) and
not present (fake agp).
- add refcounting to the remove function so that unloading drm/i915
doesn't kill the fake agp driver
v2: Fix up the cleanup and refcount, noticed by Jani Nikula.
Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We only need it to fake the agp interface and don't actually
use it in the driver anywhere. Hence conditionalize that.
This is just a prep patch to eventually disable the fake agp
driver on gen6+.
Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
For that to work we need to export the base address of the gtt
mmio window from intel-gtt. Also replace all other uses of
dev->agp by values we already have at hand.
Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is a leftover from the conversion of the i81x fake agp driver
over to the new intel-gtt code layoute.
Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Test procedure:
1. Start AP with security setting (e.g. WPA2)
2. Stop AP
3. Start AP with open security
Here it's observed that privacy is enabled in beacons and
probe responses.
This patch fixes it by checking the privacy parameter from
cfg80211_ap_settings. If privacy is not set in cfg80211_ap_settings,
set open authentication and no encryption in FW.
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Fixes the following sparse warning:
drivers/staging/android/alarm-dev.c:259:35: warning: Using plain integer as NULL pointer
Cc: Brian Swetland <swetland@google.com>
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Warnings reported by checkpatch.pl have been fixed.
Cc: Brian Swetland <swetland@google.com>
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the inline alloc_subdevices() function from comedidev.h
to drivers.c and rename it to comedi_alloc_subdevices(). The
function is large enough to warrant being an exported symbol
rather than being an inline in every driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ad7298 drivers buffer implementation uses the IIO kfifo buffer, so it needs
to select IIO_KFIFO_BUF. Otherwise (if no other driver selects the symbol) the
following linker error will occur:
drivers/built-in.o: In function `ad7298_register_ring_funcs_and_init':
(.text+0x245cf2): undefined reference to `iio_kfifo_allocate'
drivers/built-in.o: In function `ad7298_register_ring_funcs_and_init':
(.text+0x245d7d): undefined reference to `iio_kfifo_free'
drivers/built-in.o: In function `ad7298_ring_cleanup':
(.text+0x245dcd): undefined reference to `iio_kfifo_free'
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 08224262ad as it's
just not right.
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Cc: stable <stable@vger.kernel.org>
Cc: Bart Westgeest <bart@elbrys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As we have already got rid of sysfs files in the tpci200 driver, it is needed
to delete that mention in the TODO file.
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As there is no pr_* function used here, pr_fmt is not needed.
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename sm7xx driver to sm7xxfb. Fix Kconfig and Makefile to fit the new
change.
Changes are coherent with the rest of stable framebuffer drivers. TODO
updated.
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch updates/adds comments in order to clarify devices and Lynx
families supported for this driver.
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch simplifies code. It erases redundant code under little endian
compilations.
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The double delimiter check that allows a comma in the password parsing code is
unconditional. We set "tmp_end" to the end of the string and we continue to
check for double delimiter. In the case where the password doesn't contain a
comma we end up setting tmp_end to NULL and eventually setting "options" to
"end". This results in the premature termination of the options string and hence
the values of UNCip and UNC are being set to NULL. This results in mount failure
with "Connecting to DFS root not implemented yet" error.
This error is usually not noticable as we have password as the last option in
the superblock mountdata. But when we call expand_dfs_referral() from
cifs_mount() and try to compose mount options for the submount, the resulting
mountdata will be of the form
",ver=1,user=foo,pass=bar,ip=x.x.x.x,unc=\\server\share"
and hence results in the above error. This bug has been seen with older NAS
servers running Samba 3.0.24.
Fix this by moving the double delimiter check inside the conditional loop.
Changes since -v1
- removed the wrong strlen() micro optimization.
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.com>
Acked-by: Sachin Prabhu <sprabhu@redhat.com>
Cc: stable@vger.kernel.org [3.1+]
Signed-off-by: Steve French <sfrench@us.ibm.com>
The original code is equivalent to:
wrqu->retry.flags = 0x1000 & 0x0002;
so it just sets .flags to zero. We should be ORing the values together
like r8192_wx_get_retry() does in drivers/staging/rtl8192u/r8192U_wx.c.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes a spinlock recursion bug on several call sites of
gdm_usb_send_complete by not calling spin_lock_irqsave on
urb->context->tx_cxt->lock when the lock has already been acquired.
Signed-off-by: Ben Chan <benchan@chromium.org>
Cc: Sage Ahn <syahn@gctsemi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch changes the return statement on two
conditions where memory could not be acquired.
It returns -ENOMEM instead of -1.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch uses udelay instead of msleep for delays
because msleep can sleep up to 20ms for any value
less than 20.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following error reported
by checkpatch.pl in nvm.c: "ERROR: return is
not a function, parentheses are not required".
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch correctly formats all comments as reported
by checkpatch.pl.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch cuddles braces as reported
by checkpatch.pl.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch resolves all whitespace issues as reported
by checkpatch.pl.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the standard KERN_<LEVEL> #defines instead of "<.>"
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Henk de Groot <pe1dnn@amsat.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
this patch fixes the coding style problems found by using checkpatch.pl
drivers/staging/wlan-ng/prism2fw.c:175: ERROR: "foo * bar" should be "foo *bar"
drivers/staging/wlan-ng/prism2fw.c:210: WARNING: line over 80 characters
drivers/staging/wlan-ng/prism2fw.c:596: WARNING: line over 80 characters
drivers/staging/wlan-ng/prism2fw.c:658: ERROR: "foo * bar" should be "foo *bar"
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
there are warnings that are reported by checkpatch.pl
fixed the following problems
drivers/staging/wlan-ng/cfg80211.c:130: WARNING: line over 80 characters
drivers/staging/wlan-ng/cfg80211.c:366: WARNING: line over 80 characters
drivers/staging/wlan-ng/cfg80211.c:543: WARNING: line over 80 characters
drivers/staging/wlan-ng/cfg80211.c:665: WARNING: line over 80 characters
drivers/staging/wlan-ng/cfg80211.c:692: WARNING: line over 80 characters
drivers/staging/wlan-ng/cfg80211.c:735: WARNING: line over 80 characters
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit fixes coding style and deprecation issues which
includes long lines, braces with single statments in if condition
and deprecated min() function.
Signed-off-by: Adnan Ali <adnan.ali@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit fixes deprecated function kernel_thread by replacing
it with kthread_run.
Signed-off-by: Adnan Ali <adnan.ali@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit fixes coding style issues related to string splite
across multiple lines.
Signed-off-by: Adnan Ali <adnan.ali@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit fixes coding style issues related to string split
across the lines and space before tab at start of line.
Signed-off-by: Adnan Ali <adnan.ali@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit fixes coding style issues including quoted string
across multiple lines.
Signed-off-by: Adnan Ali <adnan.ali@codethink.co.uk>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Given the havoc the missing backlight pipe select code might have
caused, let's try to re-enabled pipe A support for lvds on gen4 hw.
Just to see what all blows up ...
Note though that
commit 4add75c43f
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Sat Dec 4 17:49:46 2010 +0000
drm/i915: Allow LVDS to be on pipe A for Ironlake+
claims that this caused tons of spurious wakeups somehow.
More details can be found in the old revert:
commit 12e8ba25ef
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Sep 7 23:39:28 2010 +0100
Revert "drm/i915: Allow LVDS on pipe A on gen4+"
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16307
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
On gen4+ we have a bitfield to specify from which pipe the backlight
controller should take it's clock. For PCH split platforms we've
already set these up, but only at initialization time. And without
taking into account the 3rd pipe added with ivb.
For gen4, we've completely ignored these. Although we do restrict lvds
to the 2nd pipe, so this is only a problem on machines where we boot
up with the lvds on the first pipe.
So restructure the code to enable the backlight on the right pipe at
modeset time.
v2: For odd reasons panel_enable_backlight gets called twice in a
modeset, so we can't WARN_ON in there if the backlight controller is
switched on already.
v3: backlight enable can also be called through dpms on, so the check
in there is legit. Update the comment to reflect that.
Tested-By: Kamal Mostafa <kamal@canonical.com>
Bugzilla: https://bugs.launchpad.net/bugs/954661
Cc: Carsten Emde <C.Emde@osadl.org>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
- Regroup definitions for BLC_PWM_CTL so that they're all together and
and ordered according to the bitfields.
- Add all missing definitions for BLC_PWM_CTL2.
- Use the BLM_ (for backlight modulation) prefix consistently.
- Note that combination mode (i.e. also taking the legacy backlight
control value from pci config space into account) is gen4 only.
- Move the new registers for PCH-split machines up, they're an almost
match for the gen4 defitions. Prefix the special PCH-only bits with
BLM_PCH_. Also add the pipe C select bit for ivb.
- Rip out the second pair of PCH polarity definitions - they're only
valid on early (pre-production) ilk silicon.
- Adapt the existing code to use the new definitions. This has the
nice benefit of killing a magic (1 << 30) left behind be Jesse
Barnes.
No functional changes in this patch.
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We already correctly ignore bit0 on gen < 4, now we also know why ;-)
I've decided that losing that single bit of precision isn't worth the
trouble to sprinkle IS_PINEVIEW checks all over the backlight control
code - that code is way too fragile imo.
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This function is supposed to be used at mode set time, so prevent
against future mistakes by adding a WARN().
Based on a patch by Paulo Zanoni, with the check extracted into a
little assert_hdmi_port_disabled helper added to make things self
documenting and move the assert stuff out of line.
[fixed up spelling goof-up while applying.]
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Use clk_prepare/clk_unprepare as required by the generic clk framework.
Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Use clk_prepare/clk_unprepare as required by the generic clk framework.
Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Use clk_prepare/clk_unprepare as required by the generic clk framework.
Cc: gregkh@linuxfoundation.org
Cc: ac100@lists.launchpad.net
Cc: devel@driverdev.osuosl.org
Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Marc Dietrich <marvin24@gmx.de>
