Commit graph

321,296 commits

Author SHA1 Message Date
Luciano Coelho
23ee9bf8c3 wl18xx: add runtime configuration parameters
Now wlcore requires the lower drivers to set the correct
configuration.  Move the existing private configuration to the proper
place and add all generic configuration parameters.

The important changes are in Tx interrupt pacing and Rx BA window size.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
2012-06-05 15:55:25 +03:00
Arik Nemtsov
169da04f52 wlcore/wl18xx: add hw op for Rx HW checksum
Some chip families can checksum certain classes of Rx packets in FW.
Implement the Rx-checksum feature as a HW-op. For the 18xx chip-family,
set Rx-checsum according to indication from FW.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-06-05 15:55:23 +03:00
Arik Nemtsov
2fc28de598 wlcore/wl18xx: add hw op for setting Tx HW checksum
Some chip families are capable of checksumming certain classes of Tx
packets in HW. Indicate this fact in the netdev features and perform the
HW checksum by protocol type for the 18xx family.

Fix the location of the skb network header when we move it so we can
rely on it when setting the checksum.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-06-05 15:55:20 +03:00
Luciano Coelho
b8422dcb86 wl18xx: add hw_init operation
Add wl18xx-specific HW initialization operation and create acx.[ch]
files to support that.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
2012-06-05 15:55:14 +03:00
Arik Nemtsov
872b345fba wl18xx: implement immediate Tx completion
Implement immediate Tx completion for the 18xx family. Move 18xx
specific Tx code to new tx.c/h files and create helper header files
for definitions.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-06-05 15:55:12 +03:00
Arik Nemtsov
30e2dd798d wl18xx: implement hw op for getting rx packet data length
Implement the 18xx-specific way for getting the length of a Rx packet.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-06-05 15:55:10 +03:00
Arik Nemtsov
9c809f8883 wl18xx: implement hw op for getting rx buffer data alignment
Implement the HW op for getting alignment state in wl18xx. The FW aligns
the Rx Ethernet payload data.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-06-05 15:55:08 +03:00
Arik Nemtsov
7cfefd1f2a wl18xx: set Rx block-size alignment quirk
The 18xx FW sends Rx blocks with aligned length.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-06-05 15:55:06 +03:00
Arik Nemtsov
1fab39dc4a wl18xx: add fw_status private data
The wl18xx chip passes extra information in the firmware status to the
driver.  Add a private data section to handle that.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
2012-06-05 15:55:00 +03:00
Arik Nemtsov
f648eab758 wl18xx: define HW-rate translation elements/tables
Define HW-rate conversion tables for the 18xx chip. Initialize
the appropriate wlcore elements with these tables and values to allow
conversion of HW-rates.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-06-05 15:54:58 +03:00
Arik Nemtsov
d2361c5140 wl18xx: implement hw op for setting frame length in tx_hw_desc
Set the frame length during Tx in a way compatible with the 18xx FW.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-06-05 15:54:57 +03:00
Arik Nemtsov
fb0f2e4ac0 wl18xx: implement hw op for setting blocks in hw_tx_desc
Add the 18xx variant to the HW Tx descriptor union and set the 18xx
specific values during Tx.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-06-05 15:54:55 +03:00
Arik Nemtsov
624845b31c wl18xx: implement hw op for calculating hw block count per packet
Implement the calc_tx_blocks op for the 18xx family.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-06-05 15:54:53 +03:00
Arik Nemtsov
1349c4212a wl18xx: set normal/GEM Tx spare block counts
Initialize the Tx spare block counts for all operating modes in the 18xx
card.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-06-05 15:54:51 +03:00
Arik Nemtsov
cb7b5d86c8 wl18xx: set the number of Tx descriptors
Initialize the number of Tx-descriptors for the 18xx family.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-06-05 15:54:49 +03:00
Arik Nemtsov
9d1c973a7b wl18xx: create per-chip-family private storage
Make use of the wlcore provided private storage in the 18xx low-level
driver.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-06-05 15:54:46 +03:00
Luciano Coelho
274c66cdcd wl18xx: add trigger command and ack event operations
Add the operations that allow wlcore to trigger commands to the
firmware and acknowledge when an event has been fully received.

Allocate a private buffer to hold the maximum sized cmd. Send the
entire length of the buffer each time a command is sent to signal
EOT. Remove the previous EOT mechanism.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
2012-06-05 15:54:42 +03:00
Luciano Coelho
46a1d51261 wl18xx: add some boot operations and hw-specific configurations
Implement the boot operation.  Add a wl18xx-specific configuration
structure (namely to configure the mac and phy parameters).

The default hw configuration matches the DVP board.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
2012-06-05 15:54:34 +03:00
Luciano Coelho
0cd6543f68 wl18xx: add identify chip operation
Add identify_chip operation to detect the chip ID for wl185x and set
the correct firmware name.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
2012-06-05 15:54:28 +03:00
Luciano Coelho
5d4a9fa692 wl18xx: add register table
Add the register table with the appropriate values for wl18xx.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
2012-06-05 15:54:24 +03:00
Luciano Coelho
82b890cd4e wl18xx: add partition table
Define and add the partition table in the wlcore struct.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
2012-06-05 15:54:19 +03:00
Luciano Coelho
554c36b737 wl18xx: add empty operations struct
We don't have any chip-specific operations yet, but now wlcore has
defined an operations structure and requires the pointer to be set.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
2012-06-05 15:54:14 +03:00
Luciano Coelho
197c62832b wlcore_sdio/wl18xx: use SDIO revision number to identify wl18xx chips
At least in PG1, the wl18xx chips use the same SDIO vendor/device ID,
so it's not possible to figure out which driver is to be used.  As a
workaround, we can check the SDIO revision number, because wl18xx uses
3.00 and wl12xx does not.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
2012-06-05 15:54:09 +03:00
Luciano Coelho
9a1a69901d wl18xx: add new module
Add the wl18xx module and the probe functions.  Use wlcore for the
main parts (not functional at this point due to differences in the
wl18xx initialization).

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
2012-06-05 15:54:04 +03:00
Sebastian Ott
72f6e3a8bc s390/vmlogrdr: cleanup driver attribute usage
Let the driver core handle driver attribute creation and removal. This
will simplify the code and eliminates races between attribute
availability and userspace notification via uevents.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-06-05 13:23:38 +02:00
Sebastian Ott
76e0377b24 s390/vmlogrdr: cleanup device attribute usage
Let the driver core handle device attribute creation and removal. This
will simplify the code and eliminates races between attribute
availability and userspace notification via uevents.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-06-05 13:23:37 +02:00
Sebastian Ott
8d4ecfcb6b s390/ccwgroup: remove unused ccwgroup_device member
The creator_id is no longer used. Just get rid of it.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-06-05 13:23:37 +02:00
Sebastian Ott
ed35ba9af4 s390/cio/chp: cleanup attribute usage
Let the driver core handle device attribute creation and removal. This
will simplify the code and eliminates races between attribute
availability and userspace notification via uevents.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-06-05 13:23:36 +02:00
Heiko Carstens
eb546195a7 s390/sigp: use sigp order code defines in assembly code
Use sigp order code defines in assembly code as well.
With this change all places that use sigp constants should
have been converted to use self describing defines instead
of directly using constants.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-06-05 13:23:36 +02:00
Heiko Carstens
a095a8a9d5 s390/smp: use sigp cpu status definitions
We got them from the kvm code, so let's use them.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-06-05 13:23:36 +02:00
Heiko Carstens
a9ae32c3d9 s390/smp/kvm: unifiy sigp definitions
The smp and the kvm code have different defines for the sigp order codes.
Let's just have a single place where these are defined.
Also move the sigp condition code and sigp cpu status bits to the new
sigp.h header file.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-06-05 13:23:35 +02:00
Heiko Carstens
524b24ada7 s390/smp: remove redundant check
condition code "status stored" for sigp sense running always implies
that only the "not running" status bit is set. Therefore no need to
check if it is set.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-06-05 13:23:35 +02:00
Christian Borntraeger
569ba7d208 s390/kvm: get rid of duplicate instruction
After
commit 5e8010cb50
    s390: replace TIF_SIE with PF_VCPU
there is no need to load the thread info before sie_loop where
it is also loaded.
Get rid of this duplicate instruction.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-06-05 13:23:35 +02:00
Govindraj.R
91930652a2 OMAP2+: UART: Add mechanism to probe uart pins and configure rx wakeup
The commit (bce492c0  ARM: OMAP2+: UART: Fix incorrect population of
default uart pads) removed default uart pads that where getting populated
and which was making rx pin wakeup capable. If uart pads were used in
different mode by any other module then it would fail since the default
pads took over all the uart pins forcefully. With removal of default pads
the rx_pad wakeup for console uart while waking up from off mode is broken.

Utilise the mux api available to probe the availability of mux pins
in uart mode and probe for availability of uart pin in mux mode0
if uart is available as uart pin itself then configure rx pin
as wakeup capable.

This patch itself doesn't cater to all boards. Boards using uart rx wakeup
mechanism should ensure the usage of omap_serial_init_port by configuring
required uart ports and pass necessary mux data, till then this probing of
uart pins can cater to enabling of rx pad wakeup to most of the boards.

This patch can also throw some boot warning from _omap_mux_get_by_name
if pin is requested for availability is not present while dynamically probing
the uart pins availability such boot warnings can be addressed only when board
files are patched with omap_serial_init_port calls passing the right pads
needed for a given port.

Discussion Threads for reference:
http://www.spinics.net/lists/linux-omap/msg69859.html
http://www.spinics.net/lists/linux-omap/msg68659.html

Cc: Felipe Balbi <balbi@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Russ Dill <russ.dill@gmail.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Ameya Palande <ameya.palande@ti.com>
Signed-off-by: Govindraj.R <govindraj.raja@ti.com>
[tony@atomide.com: updated to fix compile when CONFIG_OMAP_MUX is not set]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-06-05 04:04:11 -07:00
Mark Brown
cd86e3ce30 ASoC: lm59453: Unconstify dai_driver
The core fills in some blanks which makes it annoying to do the right thing
and constify the calls in the core.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-05 11:34:35 +01:00
Axel Lin
93b07e7bcd regulator: tps6507x: Avoid duplicating the same mapping table for LDO2 and VDCDCx
The voltage mapping table for LDO2 is exactly the same as VDCDCx.
Thus we can use one mapping table for both LDO2 and VDCDCx instead of
duplicating the mapping table.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-05 11:20:53 +01:00
Axel Lin
f03c4a57cf regulator: tps6507x: Remove unused min_uV and max_uV from struct tps_info
The min_uV and max_uV are not used in this driver.
For table based voltage mappings, we can get min_uV and max_uV by
info->table[0] and info->table[table_len -1].
Thus remove min_uV and max_uV from struct tps_info.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-05 11:20:53 +01:00
Haojian Zhuang
61663171be regulator: max8649: fix missing regmap in rdev
In probe(), rdev->regmap must be assigned.

Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-05 11:15:22 +01:00
Mark Brown
61dc479e99 Revert "ASoC: fsl_ssi: convert to use devm_clk_get"
This reverts commit 014e5b5670 since
PowerPC doesn't use clkdev and hasn't implemented devm_clk_get() itself.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-05 11:08:45 +01:00
Brian Austin
134b2f576b ASoC: cs42l52: Convert to devm_regmap_init_i2c()
Signed-off-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-05 11:03:35 +01:00
Brian Austin
571f6a7f07 ASoC: cs42l73: Convert to devm_regmap_init_i2c()
Signed-off-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-05 11:03:35 +01:00
Mark Brown
165961efc0 ASoC: dapm: The clock API is even less consistent than thought
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-05 10:44:23 +01:00
MR Swami Reddy
5eba8ec37f ASoC: isabelle: Remove regmap_exit()
With devm_ APIs regmap_exit() not needed, so remove regmap_exit().

Signed-off-by: Vishwas A Deshpande <vishwas.a.deshpande@ti.com>
Signed-off-by: M R Swami Reddy <mr.swami.reddy@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-05 10:42:58 +01:00
M R Swami Reddy
2f989f7e9f ASoC: Support TI Isabelle Audio driver
ASoC: Support TI Isabelle Audio driver

The Isabelle Audio IC is a complete low power high fidelity CODEC with integrated
ADCs, DACs, decimation and interpolation filters, PLL, and power providers. This
device supports 2 analog and 2 digital microphone channels, a mono earpiece driver,
stereo class G headphone drivers with ultra low power and best SNR in the industry,
stereo Class D speaker drivers, and 2 high performance Line drivers.

The below patch is a basic driver code for TI Isabelle audio codec. The
functionalities like headset detection, etc., will be included incrementally
in the up-coming patches.

Signed-off-by: Vishwas A Deshpande <vishwas.a.deshpande@ti.com>
Signed-off-by: M R Swami Reddy <mr.swami.reddy@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-05 10:42:57 +01:00
Haojian Zhuang
10bd21c054 ARM: mmp: fix missing cascade_irq in irq handler
While supporting board in non-DT mode, icu_data[i]->cascade_irq isn't
assigned with correct value.

Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-06-05 17:42:23 +08:00
Giuseppe Bilotta
e39fe251e0 HID: wiimote-ext: comment spelling fix
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-06-05 11:31:26 +02:00
Haojian Zhuang
51ce29196d ARM: dts: update memory size on brownstone
The memory size on brownstone should be 128MB, not 64MB.

Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-06-05 16:42:38 +08:00
Christian König
bb40915582 drm/radeon: fix vm deadlocks on cayman
Locking mutex in different orders just screams for
deadlocks, and some testing showed that it is actually
quite easy to trigger them.

Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-05 09:27:23 +01:00
Alex Deucher
1a8ca7502c drm/radeon: fix gpu_init on si
- Properly set up the RBs
- Properly set up the SPI
- Properly set up gb_addr_config

This should fix rendering issues on certain cards.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-05 09:25:54 +01:00
Rafał Miłecki
7838e05a0d drm/radeon/hdmi: don't set SEND_MAX_PACKETS bit
Many TVs and A/V receivers don't work with this bit set. Problem was
confirmed using: Onkyo TX-SR605, Sony BRAVIA KDL-52X3500, Sony BRAVIA
KDL-40S40xx. In theory this bit shouldn't affect audio engine when
feeding it with data, however it seems it does. Driver fglrx doesn't set
that bit in any of the above cases.
This fixes a regression introduced by 3.5-rc1.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-05 09:25:33 +01:00