The ADV7511 is probed before its slave encoder init function associates
it with an encoder. This creates a time window during which hot plug
detection interrupts can occur with an encoder, resulting in a crash in
the IRQ handler.
Fix this by ignoring hot plug detection IRQs when no encoder is
associated yet.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Allow for the desc field to be pre-filled when adding gpios to a jack.
This allows drivers to get the gpios and decide if they should be added
to the list or not. Specifically this will allow the gpio jack driver
to add gpios based on device property specifications.
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding the jack type to the dt-bindings directory will allow for device
tree files to specify the type of audio jacks that are present for a
board.
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_pcm_stream.formats is a bitmask of SNDRV_PCM_FMTBIT_*,
not of SNDRV_PCM_FORMAT_* (which are sequential integers),
however some of ASoC CODEC drivers use these values instead.
Found out by sparse on 0-day kernel tester.
Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
If a valid GPIO is specified but cannot be requested by the driver, print a
message and error out of omap2_mcspi_setup.
Signed-off-by: Michael Welling <mwelling@ieee.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The OMAP2_MCSPI_CHCONF_FORCE must be toggled even when using GPIO
chip selects. This patch conditionally calls the omap2_mcspi_set_cs
function to do so when using GPIO chip selects.
Signed-off-by: Michael Welling <mwelling@ieee.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The core spi driver swaps the polarity of the enable based on SPI_CS_HIGH.
The omap2 controller has an internal configuration register bit called
OMAP2_MCSPI_CHCONF_EPOL to handle active high chip selects as well.
So we have to revert swap the polarity back for the correct setting of the
OMAP2_MCSPI_CHCONF_FORCE bit in omap2_mcspi_set_cs.
Signed-off-by: Michael Welling <mwelling@ieee.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The core spi driver handles the delay between transactions.
This is a remanant from the transfer_one conversion.
Signed-off-by: Michael Welling <mwelling@ieee.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
As commit 6c8ca30eec ("ASoC: fsl_ssi: Don't try to round-up for PM
divisor calculation") mentioned that there's no more need to use a
round up work around to get a better divisor since the clk-divider
driver has been refined a lot.
So this patch applies the same modification to fsl_spdif driver.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove extra space between platform prefix and driver name in MODULE_ALIAS.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
I received a report from an user of following mouse which needs this quirk:
usb 1-1.6: USB disconnect, device number 58
usb 1-1.6: new low speed USB device number 59 using ehci_hcd
usb 1-1.6: New USB device found, idVendor=04f2, idProduct=1053
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6: Product: USB Optical Mouse
usb 1-1.6: Manufacturer: PixArt
usb 1-1.6: configuration #1 chosen from 1 choice
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input5887
generic-usb 0003:04F2:1053.16FE: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1a.0-1.6/input0
The quirk was tested by the reporter and it fixed the frequent disconnections etc.
[jkosina@suse.cz: reorder the position in hid-ids.h]
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The copy_xregs_to_kernel*() and copy_kernel_to_xregs*() functions are used
to copy FPU registers to kernel memory and vice versa.
They are never expected to fail, yet they have a return code, mostly because
that way they can share the assembly macros with the copy*user*() functions.
This error code is then silently ignored by the context switching
and other code - which made the bug in:
b8c1b8ea7b ("x86/fpu: Fix FPU state save area alignment bug")
harder to fix than necessary.
So remove the return values and check for no faults when FPU debugging
is enabled in the .config.
This improves the eagerfpu context switching fast path by a couple of
instructions, when FPU debugging is disabled:
ffffffff810407fa: 89 c2 mov %eax,%edx
ffffffff810407fc: 48 0f ae 2f xrstor64 (%rdi)
ffffffff81040800: 31 c0 xor %eax,%eax
-ffffffff81040802: eb 0a jmp ffffffff8104080e <__switch_to+0x321>
+ffffffff81040802: eb 16 jmp ffffffff8104081a <__switch_to+0x32d>
ffffffff81040804: 31 c0 xor %eax,%eax
ffffffff81040806: 48 0f ae 8b c0 05 00 fxrstor64 0x5c0(%rbx)
ffffffff8104080d: 00
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There's a confusing aspect of how xstate_fault() constraints are
handled by the FPU register/memory copying functions in
fpu/internal.h: they use "0" (0) to signal that the asm code
will not always set 'err' to a valid value.
But 'err' is already initialized to 0 in C code, which is duplicated
by the asm() constraint. Should the initialization value ever be
changed, it might become subtly inconsistent with the not too clear
asm() constraint.
Use 'err' as the value of the input variable instead, to clarify
this all.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There are two problems with xstate_fault handling:
- The xstate_fault() macro takes an argument, but that's
propagated into the assembly named label as well. This
is technically correct currently but might result in
failures if anytime a more complex argument is used.
So use a separate '_err' name instead for the label.
- All the xstate_fault() using functions have an error
variable named 'err', which is an output variable to
the asm() they are using. The problem is, it's not always
set by the asm(), in which case the compiler might
optimize out its initialization, so that the C variable
'err' might become corrupted after the asm() - confusing
anyone who tries to take advantage of this variable
after the asm(). Mark it an input variable as well.
This is a latent bug currently, but an upcoming debug
patch will make use of 'err'.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
So the xstate code was probably first copied from the fxregs code,
hence it carried over the 'fx' naming for the state pointer variable.
But this is slightly confusing, as we usually on call the (legacy)
MMX/SSE state 'fx', both in data structures and in the functions
build around FXSAVE/FXRSTOR.
So rename it to 'xstate' to make it more apparent what it is related to.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Remove obsolete comment about __init limitations: in the new code there aren't any.
Also standardize the comment style in the function while at it.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
All the other register<-> memory copying functions are defined
in fpu/internal.h, so move the xstate variants there too.
Beyond being more consistent, this also allows FPU debugging
checks to be added to them. (Because they can now use the
macros defined in fpu/internal.h.)
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The cryptoff parameter was added to facilitate the skipping of
IVs that sit between the AD and the plain/cipher text. However,
it was never implemented correctly as and we do not handle users
such as IPsec setting cryptoff. It is simply ignored.
Implementing correctly is in fact more trouble than what it's
worth.
This patch removes the uses of cryptoff by moving the AD forward
to fill the gap left by the IV. The AD is moved back after the
underlying AEAD processing is finished.
This is in fact beter than the cryptoff solution because it allows
algorithms that use seqniv (i.e., GCM and CCM) to hash the whole
packet as a single piece, while cryptoff meant that there was
guaranteed to be a gap.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The cryptoff parameter was added to facilitate the skipping of
IVs that sit between the AD and the plain/cipher text. However,
it was never implemented correctly as and we do not handle users
such as IPsec setting cryptoff. It is simply ignored.
Implementing correctly is in fact more trouble than what it's
worth.
This patch removes the uses of cryptoff and simply falls back
to using the old AEAD interface as it's only needed for old AEAD
implementations.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function aead_geniv_alloc currently sets cra_type even for
new style instances. This is unnecessary and may hide bugs such
as when our caller uses crypto_register_instance instead of the
correct aead_register_instance.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
New style AEAD instances must use aead_register_instance. This
worked by chance because aead_geniv_alloc is still setting things
the old way.
This patch converts the template over to the create model where
we are responsible for instance registration so that we can call
the correct function.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
New style AEAD instances must use aead_register_instance. This
worked by chance because aead_geniv_alloc is still setting things
the old way.
This patch converts the template over to the create model where
we are responsible for instance registration so that we can call
the correct function.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Newer templates use tmpl->create and have a NULL tmpl->alloc. So
we must use tmpl->create if it is set.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Newer templates use tmpl->create and have a NULL tmpl->alloc. So
we must use tmpl->create if it is set.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The mv_cesa driver does not request the CESA registers memory region.
Since we're about to add a new CESA driver, we need to make sure only one
of these drivers probe the CESA device, and requesting the registers memory
region is a good way to achieve that.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The variable tfm_count is accessed by multiple threads without
locking. This patch converts it to an atomic_t.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
AEAD algorithm implementors need to figure out a given algorithm's
IV size and maximum authentication size. During the transition
this is difficult to do as an algorithm could be new style or old
style.
This patch creates two helpers to make this easier.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
expr_eliminate_dups2() in scripts/kconfig/expr.c applies two invalid
inference rules:
(FOO || BAR) && (!FOO && !BAR) -> n
(FOO && BAR) || (!FOO || !BAR) -> y
They would be correct in propositional logic, but this is a three-valued
logic, and here it is wrong in that it changes semantics. It becomes
immediately visible when assigning the value 1 to both, FOO and BAR:
(FOO || BAR) && (!FOO && !BAR)
-> min(max(1, 1), min(2-1, 2-1)) = min(1, 1) = 1
while n evaluates to 0 and
(FOO && BAR) || (!FOO || !BAR)
-> max(min(1, 1), max(2-1, 2-1)) = max(1, 1) = 1
with y evaluating to 2.
Fix it by removing expr_eliminate_dups2() and the functions that have no
use anywhere else: expr_extract_eq_and(), expr_extract_eq_or(),
and expr_extract_eq() from scripts/kconfig/expr.c
Currently the bug is not triggered in mainline, so this patch does not
modify the configuration space there. To observe the bug consider this
example:
config MODULES
def_bool y
option modules
config FOO
def_tristate m
config BAR
def_tristate m
config TEST1
def_tristate y
depends on (FOO || BAR) && (!FOO && !BAR)
if TEST1 = n
comment "TEST1 broken"
endif
config TEST2
def_tristate y
depends on (FOO && BAR) || (!FOO || !BAR)
if TEST2 = y
comment "TEST2 broken"
endif
config TEST3
def_tristate y
depends on m && !m
if TEST3 = n
comment "TEST3 broken"
endif
TEST1, TEST2 and TEST3 should all evaluate to m, but without the patch,
none of them does. It is probably not obvious that TEST3 is the same bug,
but it becomes clear when considering what happens internally to the
expression
m && !m":
First it expands to
(m && MODULES) && !(m && MODULES),
then it is transformed into
(m && MODULES) && (!m || !MODULES),
and finally due to the bug it is replaced with n.
As a side effect, this patch reduces code size in expr.c by roughly 10%
and slightly improves startup time for all configuration frontends.
Signed-off-by: Martin Walch <walch.martin@web.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
On most configs task-struct is cache line aligned, which makes
the XSAVE area's 64-byte required alignment work out fine.
But on some .config's task_struct is aligned only to 16 bytes
(enforced by ARCH_MIN_TASKALIGN), which makes things like
fpu__copy() (that XSAVEOPT uses) not work so well.
I broke this in:
7366ed771f ("x86/fpu: Simplify FPU handling by embedding the fpstate in task_struct (again)")
which embedded the fpstate in the task_struct.
The alignment requirements of the FPU code were originally present
in ARCH_MIN_TASKALIGN, which still has a value of 16, which was the
alignment requirement of the FPU state area prior XSAVE. But this
link was not documented (and not required) and the link got lost
when the FPU state area was made dynamic years ago.
With XSAVEOPT the minimum alignment requirment went up to 64 bytes,
and the embedding of the FPU state area in task_struct exposed it
again - and '16' was not increased to '64'.
So fix this bug, but also try to address the underlying lost link
of information that made it easier to happen:
- document ARCH_MIN_TASKALIGN a bit better
- use alignof() to recover the current alignment requirements.
This would work in the future as well, should the alignment
requirements go up to 128 bytes with things like AVX512.
( We should probably also use the vSMP alignment rules for all
of x86, but that's for another patch. )
Reported-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
My Pengutronix address is not valid anymore, redirect people to the Pengutronix
kernel team.
Reported-by: Harald Geyer <harald@ccbib.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Current sh_mmcif_clk_update() is called from probe() and set_ios(),
but, the purpose of later one is just clk_prepare_enable().
No need to setup mmc->f_max/f_min in many times.
This patch separe sh_mmcif_clk_update() into clk_prepare_enable()
and mmc->f_max/f_min setup.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
struct sh_mmcif_host has 1) int clk, 2) struct clock *hclk,
and host->clk = clk_get_rate(host->hclk).
This int clk is not necessary. Let's remove it.
And, current hclk is confusable naming. Let's rename it to clk.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Some drivers schedule automatic hw resets. An example is mwifiex,
which schedules a card reset if the command handler between driver
and card firmware becomes out of sync
Signed-off-by: Andreas Fenkart <afenkart@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
x86 has variable length encoding. x86 JIT compiler is trying
to pick the shortest encoding for given bpf instruction.
While doing so the jump targets are changing, so JIT is doing
multiple passes over the program. Typical program needs 3 passes.
Some very short programs converge with 2 passes. Large programs
may need 4 or 5. But specially crafted bpf programs may hit the
pass limit and if the program converges on the last iteration
the JIT compiler will be producing an image full of 'int 3' insns.
Fix this corner case by doing final iteration over bpf program.
Fixes: 0a14842f5a ("net: filter: Just In Time compiler for x86-64")
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Tested-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for flashing 10GBaseT adapter with BCM 84834 PHY and
Aquantia AQ1202 PHY.
Updating of the PHY firmware must happen before the INITIALIZE_CMD.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While adding support for 7425 PHY in the 7xxx PHY driver, the ID that
was used was actually coming from an external PHY: a BCM5461x. Fix this
by using the proper ID for the internal 7425 PHY and set the
PHY_IS_INTERNAL flag, otherwise consumers of this PHY driver would not
be able to properly identify it as such.
Fixes: d068b02cfd ("net: phy: add BCM7425 and BCM7429 PHYs")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Petri Gynther <pgynther@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add two more eBPF test cases for JITs, i.e. the second one revealed a
bug in the x86_64 JIT compiler, where only an int3 filled image from
the allocator was emitted and later wrongly set by the compiler as the
bpf_func program code since optimization pass boundary was surpassed
w/o actually emitting opcodes.
Interpreter:
[ 45.782892] test_bpf: #242 BPF_MAXINSNS: Very long jump backwards jited:0 11 PASS
[ 45.783062] test_bpf: #243 BPF_MAXINSNS: Edge hopping nuthouse jited:0 14705 PASS
After x86_64 JIT (fixed):
[ 80.495638] test_bpf: #242 BPF_MAXINSNS: Very long jump backwards jited:1 6 PASS
[ 80.495957] test_bpf: #243 BPF_MAXINSNS: Edge hopping nuthouse jited:1 17157 PASS
Reference: http://thread.gmane.org/gmane.linux.network/364729
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Lendacky says:
====================
amd-xgbe: AMD XGBE driver updates 2015-05-22
The following patches are included in this driver update series:
- Retrieve and set an additional hardware feature setting
- Fix the initial mode/speed determination when auto-negotiation is
disabled
- Add additional netif_dbg support to the driver
This patch series is based on net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Change more netdev_dbg statements over to netif_dbg and add some new
netif_dbg statements to the driver.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the ethtool command is used to set the speed of the device while
the device is down, the check to set the initial mode may fail when
the device is brought up, causing failure to bring the device up.
Update the code to set the initial mode based on the desired speed if
auto-negotiation is disabled.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The device private data structure contains all the defined hardware
features for the device. However one of the features is not set. Even
though the feature is not currently used, set it to avoid future
issues of the feature being checked thinking it has been properly set.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
