Commit graph

533,096 commits

Author SHA1 Message Date
Ryusuke Konishi
283ee1482f nilfs2: fix deadlock of segment constructor during recovery
According to a report from Yuxuan Shui, nilfs2 in kernel 3.19 got stuck
during recovery at mount time.  The code path that caused the deadlock was
as follows:

  nilfs_fill_super()
    load_nilfs()
      nilfs_salvage_orphan_logs()
        * Do roll-forwarding, attach segment constructor for recovery,
          and kick it.

        nilfs_segctor_thread()
          nilfs_segctor_thread_construct()
           * A lock is held with nilfs_transaction_lock()
             nilfs_segctor_do_construct()
               nilfs_segctor_drop_written_files()
                 iput()
                   iput_final()
                     write_inode_now()
                       writeback_single_inode()
                         __writeback_single_inode()
                           do_writepages()
                             nilfs_writepage()
                               nilfs_construct_dsync_segment()
                                 nilfs_transaction_lock() --> deadlock

This can happen if commit 7ef3ff2fea ("nilfs2: fix deadlock of segment
constructor over I_SYNC flag") is applied and roll-forward recovery was
performed at mount time.  The roll-forward recovery can happen if datasync
write is done and the file system crashes immediately after that.  For
instance, we can reproduce the issue with the following steps:

 < nilfs2 is mounted on /nilfs (device: /dev/sdb1) >
 # dd if=/dev/zero of=/nilfs/test bs=4k count=1 && sync
 # dd if=/dev/zero of=/nilfs/test conv=notrunc oflag=dsync bs=4k
 count=1 && reboot -nfh
 < the system will immediately reboot >
 # mount -t nilfs2 /dev/sdb1 /nilfs

The deadlock occurs because iput() can run segment constructor through
writeback_single_inode() if MS_ACTIVE flag is not set on sb->s_flags.  The
above commit changed segment constructor so that it calls iput()
asynchronously for inodes with i_nlink == 0, but that change was
imperfect.

This fixes the another deadlock by deferring iput() in segment constructor
even for the case that mount is not finished, that is, for the case that
MS_ACTIVE flag is not set.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Reported-by: Yuxuan Shui <yshuiv7@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-12 18:46:08 -07:00
Danesh Petigara
850fc430f4 mm: cma: fix CMA aligned offset calculation
The CMA aligned offset calculation is incorrect for non-zero order_per_bit
values.

For example, if cma->order_per_bit=1, cma->base_pfn= 0x2f800000 and
align_order=12, the function returns a value of 0x17c00 instead of 0x400.

This patch fixes the CMA aligned offset calculation.

The previous calculation was wrong and would return too-large values for
the offset, so that when cma_alloc looks for free pages in the bitmap with
the requested alignment > order_per_bit, it starts too far into the bitmap
and so CMA allocations will fail despite there actually being plenty of
free pages remaining.  It will also probably have the wrong alignment.
With this change, we will get the correct offset into the bitmap.

One affected user is powerpc KVM, which has kvm_cma->order_per_bit set to
KVM_CMA_CHUNK_ORDER - PAGE_SHIFT, or 18 - 12 = 6.

[gregory.0xf0@gmail.com: changelog additions]
Signed-off-by: Danesh Petigara <dpetigara@broadcom.com>
Reviewed-by: Gregory Fong <gregory.0xf0@gmail.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-12 18:46:07 -07:00
David Rientjes
44fc80573c mm, hugetlb: close race when setting PageTail for gigantic pages
Now that gigantic pages are dynamically allocatable, care must be taken to
ensure that p->first_page is valid before setting PageTail.

If this isn't done, then it is possible to race and have compound_head()
return NULL.

Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-12 18:46:07 -07:00
Michal Hocko
e009d5dc0a mm, oom: do not fail __GFP_NOFAIL allocation if oom killer is disabled
Tetsuo Handa has pointed out that __GFP_NOFAIL allocations might fail
after OOM killer is disabled if the allocation is performed by a kernel
thread.  This behavior was introduced from the very beginning by
7f33d49a2e ("mm, PM/Freezer: Disable OOM killer when tasks are frozen").
 This means that the basic contract for the allocation request is broken
and the context requesting such an allocation might blow up unexpectedly.

There are basically two ways forward.

1) move oom_killer_disable after kernel threads are frozen.  This has a
   risk that the OOM victim wouldn't be able to finish because it would
   depend on an already frozen kernel thread.  This would be really tricky
   to debug.

2) do not fail GFP_NOFAIL allocation no matter what and risk a
   potential Freezable kernel threads will loop and fail the suspend.
   Incidental allocations after kernel threads are frozen will at least
   dump a warning - if we are lucky and the serial console is still active
   of course...

This patch implements the later option because it is safer.  We would see
warning rather than allocation failures for the kernel threads which would
blow up otherwise and have a higher chances to identify __GFP_NOFAIL users
from deeper pm code.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Acked-by: David Rientjes <rientjes@gooogle.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-12 18:46:07 -07:00
Javier Martinez Canillas
8792f7772f drivers/rtc/rtc-s3c.c: add .needs_src_clk to s3c6410 RTC data
Commit df9e26d093 ("rtc: s3c: add support for RTC of Exynos3250 SoC")
added an "rtc_src" DT property to specify the clock used as a source to
the S3C real-time clock.

Not all SoCs needs this so commit eaf3a65908 ("drivers/rtc/rtc-s3c.c:
fix initialization failure without rtc source clock") changed to check
the struct s3c_rtc_data .needs_src_clk to conditionally grab the clock.

But that commit didn't update the data for each IP version so the RTC
broke on the boards that needs a source clock. This is the case of at
least Exynos5250 and Exynos5440 which uses the s3c6410 RTC IP block.

This commit fixes the S3C rtc on the Exynos5250 Snow and Exynos5420
Peach Pit and Pi Chromebooks.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Cc: Doug Anderson <dianders@chromium.org>
Cc: Olof Johansson <olof@lixom.net>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Tyler Baker <tyler.baker@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-12 18:46:07 -07:00
Mark Fasheh
18d585f0f2 ocfs2: make append_dio an incompat feature
It turns out that making this feature ro_compat isn't quite enough to
prevent accidental corruption on mount from older kernels.  Ocfs2 (like
other file systems) will process orphaned inodes even when the user mounts
in 'ro' mode.  So for the case of a filesystem not knowing the append_dio
feature, mounting the filesystem could result in orphaned-for-dio files
being deleted, which we clearly don't want.

So instead, turn this into an incompat flag.

Btw, this is kind of my fault - initially I asked that we add a flag to
cover the feature and even suggested that we use an ro flag.  It wasn't
until I was looking through our commits for v4.0-rc1 that I realized we
actually want this to be incompat.

Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-12 18:46:07 -07:00
Marcelo Tosatti
2b25385761 KVM: s390: Features and Fixes for 4.1 (kvm/next)
1. Several Fixes and enhancements
 ---------------------------------
 - These 3 patches have cc stable:
 b75f4c9 KVM: s390: Zero out current VMDB of STSI before including level3 data.
 261520d KVM: s390: fix handling of write errors in the tpi handler
 15462e3 KVM: s390: reinjection of irqs can fail in the tpi handler
 
 2. SIMD support the kernel part (introduced with z13)
 -----------------------------------------------------
 - two KVM-generic changes in kvm.h:
 1. New capability that can be enabled: KVM_CAP_S390_VECTOR_REGISTERS
 2. increased padding size for sync regs in struct kvm_run to clarify that
    sync regs can be larger than 1k. This is fine as this is the last
    element in the structure.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJU+ab+AAoJEBF7vIC1phx8jMMQAJ1lXYJUbnOSJ7GD1aqQe4b3
 pGW9rjQtZ1sZ6tH45sQeHzHg9tbD5ZHvSwMRuW2itLZXtusUXYajkR3TdHiR2bcR
 karOqEducjPR6UCLdyfCAKkssZAkPyTXMnj3PRr9vpISvw53W5ZKxulIMtqSbMP0
 Cl5eP1x+qz24csDV7u/S0k4Kccol43XfmVqVtZm2yVVt1qXIM1qqbUoJBTGECLHC
 Ux9BbtTYC4lZl8Q/m9hyCD6YV7flhSKPKN6VbyAnRIM1LQiLCEAmppWJIbTbTI+3
 m+fM52ue/QlkogGCQ7Mg9+lJkwBKfNCwneSPds4/M41Atwqz5m66L/D1rIlfD4Bh
 HbnMB9FaRXIeyDAgdG/pemZQeOsnDHiJBHphQ0Q5TPl1lLbWjHFweG8uQ9vGMizf
 Diy5Rk16MBVbgjYBf8Jy7ZXHisBN+gbOkzXD5j28+j3OGdzhVilFQIJu2oqv5wzW
 r30ogxmdGH7ljh6bWJKj7YXZx0C3oDF/8HRkf4Fevh064c66S0jTLd8wb4YqGSy5
 3qfNqovnvaSjPyKLVajmSOeFIVwtSnylFTqmTOxsC5o786BWgU0Mh6fhKGyUQlcs
 PMmn5B5VrLLb8YZtX0XOWkeA45KXXeT19qb2WaB/VZSSgb4fG7W/oqqQ6LrZl0sc
 pEBYwbsFvkFG+04aIYN3
 =bzDF
 -----END PGP SIGNATURE-----

Merge tag 'kvm-s390-next-20150306' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into queue

KVM: s390: Features and Fixes for 4.1 (kvm/next)

1. Several Fixes and enhancements
---------------------------------
- These 3 patches have cc stable:
b75f4c9 KVM: s390: Zero out current VMDB of STSI before including level3 data.
261520d KVM: s390: fix handling of write errors in the tpi handler
15462e3 KVM: s390: reinjection of irqs can fail in the tpi handler

2. SIMD support the kernel part (introduced with z13)
-----------------------------------------------------
- two KVM-generic changes in kvm.h:
1. New capability that can be enabled: KVM_CAP_S390_VECTOR_REGISTERS
2. increased padding size for sync regs in struct kvm_run to clarify that
   sync regs can be larger than 1k. This is fine as this is the last
   element in the structure.
2015-03-12 22:09:35 -03:00
Petr Matousek
c1a6bff28c kvm: x86: i8259: return initialized data on invalid-size read
If data is read from PIC with invalid access size, the return data stays
uninitialized even though success is returned.

Fix this by always initializing the data.

Signed-off-by: Petr Matousek <pmatouse@redhat.com>
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2015-03-12 22:02:46 -03:00
Christian Borntraeger
1662e862a8 KVM: MAINTAINERS: add file arch/x86/kernel/kvm.c|kvmclock.c
The KVM list should be CCed on changes for arch/x86/kernel/kvm.c
and arch/x86/kernel/kvmclock.c

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2015-03-12 21:57:58 -03:00
Chris Zankel
0372c1abdd Xtensa fixes for 4.0:
- make xtfpgs LCD driver functional and configurable. This fixes hardware
   lockup on KC705/ML605 boot;
 - wire bpf and execveat syscalls;
 - provide __NR_sync_file_range2 instead of __NR_sync_file_range, as that's
   what xtensa uses.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU9sxSAAoJEFH5zJH4P6BEwFsP/1qkSVtBdkiCQhhTp+jTxVfT
 uVUST6QbG+zcqV61Ni44ghd4T0qkfGZZixlCMvDT2o3mE/dNWVZiG0rAt+q09HQ3
 sUSmLaM8scUqreZRUdvLVq+wZTQH9dUhtBvssLrkFk0VJrTkNuCZo56A5d8BL7RM
 xD8FM2d3UVDBnG9Rs9O7guzu/lvIiYMYO9e3mOh//pY9aSDnn6fUVpoqVwx9qx7v
 azi8aSFDMQH4swGHojNdrRfM0eUZxyYie/fzcj1YkE5qOHo9m7ZvO1jighZc0xka
 qBTQV/k/5oA7hY6Ovg7PjSeZCuqWnK2nGV+wJnGJYH21JBLZvK/0NLT7UFEVDXbt
 7mCbhlxgBclj5a1Vb2zfmPjw1fZ3qRJ8DNPXt8KkCPCy+HYyN6RRqjCxfBAFV/KI
 L26TmyfpXOtdOYX3e+vp23LFn6hdSbZbY45LCIMBW1xi4bnPczmRviXtAhZwWtTA
 lrE1sPzckRAjbcqsfZ5+hDZDplQKI/VlA/YTIuG78bPzecSZLLRahycYJSlDl2CQ
 thoyZedLN6ia838yk3B17CHxf2NFNUEoSLxIuOC0xkhJ6OkOs79duGoL4sbVQLKt
 8EzVQ3p2ZmivLvRLYykUaqoq33tFleJCitANzq12k3auohDfBkpg6lFUkq6jmqP9
 XRQL52qTwt52phod1S3E
 =y80U
 -----END PGP SIGNATURE-----

Merge tag 'xtensa-for-next-20150304' of git://github.com/jcmvbkbc/linux-xtensa into for_next

Xtensa fixes for 4.0:

- make xtfpgs LCD driver functional and configurable. This fixes hardware
  lockup on KC705/ML605 boot;
- wire bpf and execveat syscalls;
- provide __NR_sync_file_range2 instead of __NR_sync_file_range, as that's
  what xtensa uses.
2015-03-13 00:41:32 +00:00
Chris Zankel
40aad098c2 Xtensa improvements for 3.20:
- add audio subsystem bits to xtfpga DTS and provide sample KC705 config
   with audio features enabled.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU1eERAAoJEFH5zJH4P6BEp2YP+wXOuRblG6mkUCSbZ1eAvAbs
 pU//kXiQ5YmtUto4CcFmLJ25gsaDE4pg4mk+/RYBiUbOclkKvztMbkYiTxrodBN/
 IE8VQIM2KkDSJYi8mWoUiapuw6LDOyFlC+E54kDMoZ866BkxksVrM47u7BiYlcWi
 78iIf1So19aWE5d7ffYgiUbrCWqdiDvLVBdl88ygo1ltcFlwgx6rCtZky/j1Xxoe
 ZdL0sIE2Kee/FJDy3Kj32xK+ConRnyEFN2wSM0vTMqoENPPp69XcEu6Mx4aKpY5C
 pQ8yqeLvBAdb/8twCeU037VQuUJZUH7GQOn07FKoWibm9U+u2D34n0fzP1p20CSB
 ASCnXbt+ZCU2BfT/FrisreQb4aFFwF+AFL5P/cmob+n1RJp1UmQWpv3MpQFYqw2h
 V0wdBjD7AxSU+LGHqq9PIzCUwOKCS3wIAXZELatZaimJ7Er0fB0Lre69O9Xwfzrb
 gQSvXA5UXsbnUwTTGTx93myKCkx//CtExfHZ8zJUTvytvYrw0QrkBcMZsjGsyoUc
 B52ih+NYBcJDQOwWYEKEY7nsLll6arZc1u/A0jKdyIy6Ft4ln+KzTc/eIoH6DioL
 BXLgQvkJ5UobbY/jWe28Hj9PQFeUYxGoH/k3JXZv5jMPlYEWT6FMr7hQ8JNf3qBz
 0bB9WBzx1MphLIJTog84
 =qcqh
 -----END PGP SIGNATURE-----

Merge tag 'xtensa-for-next-20150207' of git://github.com/jcmvbkbc/linux-xtensa into for_next

Xtensa improvements for 3.20:

- add audio subsystem bits to xtfpga DTS and provide sample KC705 config
  with audio features enabled.
2015-03-13 00:39:30 +00:00
Bjorn Helgaas
646c0282df PCI: Fail pci_ioremap_bar() on unassigned resources
Make pci_ioremap_bar() fail if we're trying to map a BAR that hasn't been
assigned.

Normally pci_enable_device() will fail if a BAR hasn't been assigned, but a
driver can successfully call pci_enable_device_io() even if a memory BAR
hasn't been assigned.  That driver should not be able to use
pci_ioremap_bar() to map that unassigned memory BAR.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-12 18:52:34 -05:00
Bjorn Helgaas
1f7bf3bfb5 PCI: Show driver, BAR#, and resource on pci_ioremap_bar() failure
Use dev_warn() to complain about a pci_ioremap_bar() failure so we can
include the driver name, BAR number, and the resource itself.  We could use
dev_WARN() to also get the backtrace as we did previously, but I think
that's more information than we need.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-12 18:52:22 -05:00
Bjorn Helgaas
c770cb4cb5 PCI: Mark invalid BARs as unassigned
If a BAR is not inside any upstream bridge window, or if it conflicts with
another resource, mark it as IORESOURCE_UNSET so we don't try to use it.
We may be able to assign a different address for it.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-12 18:52:12 -05:00
Dave Airlie
e2cdcafa8a Merge branch 'drm-fixes-4.0' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Some additional radeon fixes for 4.0

* 'drm-fixes-4.0' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: drop setting UPLL to sleep mode
  drm/radeon: fix wait to actually occur after the signaling callback
2015-03-13 09:21:24 +10:00
Dave Airlie
552d664341 Merge branch 'vmwgfx-fixes-4.0' of git://people.freedesktop.org/~thomash/linux into drm-fixes
A couple of fixes for vmwgfx.

* 'vmwgfx-fixes-4.0' of git://people.freedesktop.org/~thomash/linux:
  drm/vmwgfx: Fix an issue with the device losing its irq line on module unload
  drm/vmwgfx: Correctly NULLify dma buffer pointer on failure
  drm/vmwgfx: Reorder device takedown somewhat
  drm/vmwgfx: Fix a couple of lock dependency violations
2015-03-13 09:15:56 +10:00
Dave Airlie
17b263f6ea Merge tag 'drm-intel-fixes-2015-03-12' of git://anongit.freedesktop.org/drm-intel into drm-fixes
More i915 fixes, three out of four are fixes to old bugs, cc: stable.

* tag 'drm-intel-fixes-2015-03-12' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Prevent TLB error on first execution on SNB
  drm/i915: Do both mt and gen6 style forcewake reset on ivb probe
  drm/i915: Make WAIT_IOCTL negative timeouts be indefinite again
  drm/i915: use in_interrupt() not in_irq() to check context
2015-03-13 09:15:01 +10:00
Heiko Stuebner
91d5cb7372 ARM: dts: rockchip: complete rk3288-evb pmic supplies
This adds the static vcc_sys regulator to the rk3288-evb, the missing
rk808 supplies from it and all the supplies of the act8846 evb-variant.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-03-13 00:07:39 +01:00
Daniel Borkmann
54720df130 cls_bpf: do eBPF invocation under non-bh RCU lock variant for maps
Currently, it is possible in cls_bpf to access eBPF maps only under
rcu_read_lock_bh() variants: while on ingress side, that is, handle_ing(),
the classifier would be called from __netif_receive_skb_core() under
rcu_read_lock(); on egress side, however, it's rcu_read_lock_bh() via
__dev_queue_xmit().

This rcu/rcu_bh mix doesn't work together with eBPF maps as they require
soley to be called under rcu_read_lock(). eBPF maps could also be shared
among various other eBPF programs (possibly even with other eBPF program
types, f.e. tracing) and user space processes, so any context is assumed.

Therefore, a possible fix for cls_bpf is to wrap/nest eBPF program
invocation under non-bh RCU lock variant.

Fixes: e2e9b6541d ("cls_bpf: add initial eBPF support for programmable classifiers")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-12 18:33:15 -04:00
David S. Miller
06741d055b Merge branch 'fib_trie_table_merge_fixes'
Alexander Duyck says:

====================
fib_trie: Minor fixes for table merge

This patch set addresses two issues reported with the tables merged, the
first is a NULL pointer dereference, and the other is to remove a WARN_ON
and set the ordering for aliases from different tables with the same slen
values.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-12 18:26:58 -04:00
Alexander Duyck
0b65bd97ba fib_trie: Provide a deterministic order for fib_alias w/ tables merged
This change makes it so that we should always have a deterministic ordering
for the main and local aliases within the merged table when two leaves
overlap.

So for example if we have a leaf with a key of 192.168.254.0.  If we
previously added two aliases with a prefix length of 24 from both local and
main the first entry would be first and the second would be second.  When I
was coding this I had added a WARN_ON should such a situation occur as I
wasn't sure how likely it would be.  However this WARN_ON has been
triggered so this is something that should be addressed.

With this patch the ordering of the aliases is as follows.  First they are
sorted on prefix length, then on their table ID, then tos, and finally
priority.  This way what we end up doing is essentially interleaving the
two tables on what used to be leaf_info structure boundaries.

Fixes: 0ddcf43d5 ("ipv4: FIB Local/MAIN table collapse")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-12 18:26:51 -04:00
Alexander Duyck
3c9e9f7320 fib_trie: Avoid NULL pointer if local table is not allocated
The function fib_unmerge assumed the local table had already been
allocated.  If that is not the case however when custom rules are applied
then this can result in a NULL pointer dereference.

In order to prevent this we must check the value of the local table pointer
and if it is NULL simply return 0 as there is no local table to separate
from the main.

Fixes: 0ddcf43d5 ("ipv4: FIB Local/MAIN table collapse")
Reported-by: Madhu Challa <challa@noironetworks.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-12 18:26:51 -04:00
Paul E. McKenney
5c60d25fa1 rcu: Add diagnostics to grace-period cleanup
At grace-period initialization time, RCU checks that all quiescent
states were really reported for the previous grace period.  Now that
grace-period cleanup has been split out of grace-period initialization,
this commit also performs those checks at grace-period cleanup time.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-03-12 15:19:38 -07:00
Paul E. McKenney
186bea5d35 rcutorture: Default to grace-period-initialization delays
Given that CPU-hotplug events are now applied only at the starts of
grace periods, it makes sense to unconditionally enable slow grace-period
initialization for rcutorture testing.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-03-12 15:19:38 -07:00
Paul E. McKenney
88428cc5c2 rcu: Handle outgoing CPUs on exit from idle loop
This commit informs RCU of an outgoing CPU just before that CPU invokes
arch_cpu_idle_dead() during its last pass through the idle loop (via a
new CPU_DYING_IDLE notifier value).  This change means that RCU need not
deal with outgoing CPUs passing through the scheduler after informing
RCU that they are no longer online.  Note that removing the CPU from
the rcu_node ->qsmaskinit bit masks is done at CPU_DYING_IDLE time,
and orphaning callbacks is still done at CPU_DEAD time, the reason being
that at CPU_DEAD time we have another CPU that can adopt them.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-03-12 15:19:38 -07:00
Paul E. McKenney
528a25b00e cpu: Make CPU-offline idle-loop transition point more precise
This commit uses a per-CPU variable to make the CPU-offline code path
through the idle loop more precise, so that the outgoing CPU is
guaranteed to make it into the idle loop before it is powered off.
This commit is in preparation for putting the RCU offline-handling
code on this code path, which will eliminate the magic one-jiffy
wait that RCU uses as the maximum time for an outgoing CPU to get
all the way through the scheduler.

The magic one-jiffy wait for incoming CPUs remains a separate issue.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-03-12 15:19:37 -07:00
Paul E. McKenney
c199068913 rcu: Eliminate ->onoff_mutex from rcu_node structure
Because that RCU grace-period initialization need no longer exclude
CPU-hotplug operations, this commit eliminates the ->onoff_mutex and
its uses.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-03-12 15:19:37 -07:00
Paul E. McKenney
0aa04b055e rcu: Process offlining and onlining only at grace-period start
Races between CPU hotplug and grace periods can be difficult to resolve,
so the ->onoff_mutex is used to exclude the two events.  Unfortunately,
this means that it is impossible for an outgoing CPU to perform the
last bits of its offlining from its last pass through the idle loop,
because sleeplocks cannot be acquired in that context.

This commit avoids these problems by buffering online and offline events
in a new ->qsmaskinitnext field in the leaf rcu_node structures.  When a
grace period starts, the events accumulated in this mask are applied to
the ->qsmaskinit field, and, if needed, up the rcu_node tree.  The special
case of all CPUs corresponding to a given leaf rcu_node structure being
offline while there are still elements in that structure's ->blkd_tasks
list is handled using a new ->wait_blkd_tasks field.  In this case,
propagating the offline bits up the tree is deferred until the beginning
of the grace period after all of the tasks have exited their RCU read-side
critical sections and removed themselves from the list, at which point
the ->wait_blkd_tasks flag is cleared.  If one of that leaf rcu_node
structure's CPUs comes back online before the list empties, then the
->wait_blkd_tasks flag is simply cleared.

This of course means that RCU's notion of which CPUs are offline can be
out of date.  This is OK because RCU need only wait on CPUs that were
online at the time that the grace period started.  In addition, RCU's
force-quiescent-state actions will handle the case where a CPU goes
offline after the grace period starts.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-03-12 15:19:37 -07:00
Paul E. McKenney
cc99a310ca rcu: Move rcu_report_unblock_qs_rnp() to common code
The rcu_report_unblock_qs_rnp() function is invoked when the
last task blocking the current grace period exits its outermost
RCU read-side critical section.  Previously, this was called only
from rcu_read_unlock_special(), and was therefore defined only when
CONFIG_RCU_PREEMPT=y.  However, this function will be invoked even when
CONFIG_RCU_PREEMPT=n once CPU-hotplug operations are processed only at
the beginnings of RCU grace periods.  The reason for this change is that
the last task on a given leaf rcu_node structure's ->blkd_tasks list
might well exit its RCU read-side critical section between the time that
recent CPU-hotplug operations were applied and when the new grace period
was initialized.  This situation could result in RCU waiting forever on
that leaf rcu_node structure, because if all that structure's CPUs were
already offline, there would be no quiescent-state events to drive that
structure's part of the grace period.

This commit therefore moves rcu_report_unblock_qs_rnp() to common code
that is built unconditionally so that the quiescent-state-forcing code
can clean up after this situation, avoiding the grace-period stall.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-03-12 15:19:36 -07:00
Paul E. McKenney
8eb74b2b29 rcu: Rework preemptible expedited bitmask handling
Currently, the rcu_node tree ->expmask bitmasks are initially set to
reflect the online CPUs.  This is pointless, because only the CPUs
preempted within RCU read-side critical sections by the preceding
synchronize_sched_expedited() need to be tracked.  This commit therefore
instead sets up these bitmasks based on the state of the ->blkd_tasks
lists.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-03-12 15:18:42 -07:00
Kevin Hilman
eea97aed81 MAINTAINERS: add entry for Generic PM domains (genpd)
Add entry for genpd with Rafael, myself and Ulf as co-maintainers.

Signed-off-by: Kevin Hilman <khilman@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-12 23:04:20 +01:00
Olivier Sobrie
d1b12075ff Input: pwm-beeper - remove useless call to pwm_config()
Calling pwm_config() with a period equal to zero always results in
error (-EINVAL) and pwm chip config method is never called.

Signed-off-by: Olivier Sobrie <olivier@sobrie.be>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-12 14:53:11 -07:00
Hans de Goede
877bef7de1 Input: sun4i-ts - really fix A10 temperature reporting
The commit titled: "Input: sun4i-ts -  A10 (sun4i) has a different
temperature curve" contains a math error, the offset it uses is in degrees,
but the actual code applies the offset before multiplying by stepsize :|

Given that this is rather backwards (every math course ever thought applies
the multiplication before the offset for linear functions), this commit
fixes things by changing the code applying the offset to do the logical
thing, adjusting the offset for the other models accordingly.

This has been tested on an A10, A13, A20 and A31 to make sure everything
really is correct now.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-12 14:53:10 -07:00
Marc Zyngier
aeda9130c3 arm/arm64: KVM: Optimize handling of Access Flag faults
Now that we have page aging in Stage-2, it becomes obvious that
we're doing way too much work handling the fault.

The page is not going anywhere (it is still mapped), the page
tables are already allocated, and all we want is to flip a bit
in the PMD or PTE. Also, we can avoid any form of TLB invalidation,
since a page with the AF bit off is not allowed to be cached.

An obvious solution is to have a separate handler for FSC_ACCESS,
where we pride ourselves to only do the very minimum amount of
work.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-03-12 22:34:49 +01:00
Marc Zyngier
35307b9a5f arm/arm64: KVM: Implement Stage-2 page aging
Until now, KVM/arm didn't care much for page aging (who was swapping
anyway?), and simply provided empty hooks to the core KVM code. With
server-type systems now being available, things are quite different.

This patch implements very simple support for page aging, by clearing
the Access flag in the Stage-2 page tables. On access fault, the current
fault handling will write the PTE or PMD again, putting the Access flag
back on.

It should be possible to implement a much faster handling for Access
faults, but that's left for a later patch.

With this in place, performance in VMs is degraded much more gracefully.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-03-12 22:34:43 +01:00
Marc Zyngier
1d2ebaccc7 arm/arm64: KVM: Allow handle_hva_to_gpa to return a value
So far, handle_hva_to_gpa was never required to return a value.
As we prepare to age pages at Stage-2, we need to be able to
return a value from the iterator (kvm_test_age_hva).

Adapt the code to handle this situation. No semantic change.

Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-03-12 22:34:30 +01:00
Mel Gorman
ba68bc0115 mm: thp: Return the correct value for change_huge_pmd
The wrong value is being returned by change_huge_pmd since commit
10c1045f28 ("mm: numa: avoid unnecessary TLB flushes when setting
NUMA hinting entries") which allows a fallthrough that tries to adjust
non-existent PTEs. This patch corrects it.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-12 14:07:41 -07:00
Yijing Wang
c90570d951 PCI: Assign resources before drivers claim devices (pci_scan_bus())
Previously, pci_scan_bus() created a root PCI bus, enumerated the devices
on it, and called pci_bus_add_devices(), which made the devices available
for drivers to claim them.

Most callers assigned resources to devices after pci_scan_bus() returns,
which may be after drivers have claimed the devices.  This is incorrect;
the PCI core should not change device resources while a driver is managing
the device.

Remove pci_bus_add_devices() from pci_scan_bus() and do it after any
resource assignment in the callers.

[bhelgaas: changelog, check for failure in mcf_pci_init()]
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: Geert Uytterhoeven <geert@linux-m68k.org>
CC: Guan Xuetao <gxt@mprc.pku.edu.cn>
CC: Richard Henderson <rth@twiddle.net>
CC: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
CC: Matt Turner <mattst88@gmail.com>
2015-03-12 15:04:01 -05:00
Takashi Iwai
2ddee91abe ALSA: hda - Add workaround for MacBook Air 5,2 built-in mic
MacBook Air 5,2 has the same problem as MacBook Pro 8,1 where the
built-in mic records only the right channel.  Apply the same
workaround as MBP8,1 to spread the mono channel via a Cirrus codec
vendor-specific COEF setup.

Reported-and-tested-by: Vasil Zlatanov <vasil.zlatanov@gmail.com>
Cc: <stable@vger.kernel.org> # 3.9+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-12 20:50:32 +01:00
Daniel Borkmann
80f1d68ccb ebpf: verifier: check that call reg with ARG_ANYTHING is initialized
I noticed that a helper function with argument type ARG_ANYTHING does
not need to have an initialized value (register).

This can worst case lead to unintented stack memory leakage in future
helper functions if they are not carefully designed, or unintended
application behaviour in case the application developer was not careful
enough to match a correct helper function signature in the API.

The underlying issue is that ARG_ANYTHING should actually be split
into two different semantics:

  1) ARG_DONTCARE for function arguments that the helper function
     does not care about (in other words: the default for unused
     function arguments), and

  2) ARG_ANYTHING that is an argument actually being used by a
     helper function and *guaranteed* to be an initialized register.

The current risk is low: ARG_ANYTHING is only used for the 'flags'
argument (r4) in bpf_map_update_elem() that internally does strict
checking.

Fixes: 17a5267067 ("bpf: verifier (add verifier core)")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-12 15:29:31 -04:00
Takashi Iwai
bad994f5b4 ALSA: hda - Set single_adc_amp flag for CS420x codecs
CS420x codecs seem to deal only the single amps of ADC nodes even
though the nodes receive multiple inputs.  This leads to the
inconsistent amp value after S3/S4 resume, for example.

The fix is just to set codec->single_adc_amp flag.  Then the driver
handles these ADC amps as if single connections.

Reported-and-tested-by: Vasil Zlatanov <vasil.zlatanov@gmail.com>
Cc: <stable@vger.kernel.org> # 3.9+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-12 20:28:04 +01:00
John Stultz
7fe5f1c16c MAINTAINERS: Add selftests/timers to the timekeeping maintainance list
Since I'm adding a bunch of tests to selftests/timers, put me
on the hook in the maintainers file.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12 13:22:16 -06:00
John Stultz
0d02a753a5 selftests/timers: Add set-2038 test from timetest suite
Adds the set-2038 test which sets the time to near-edge cases
like the start and end of the 32 bit epoch and checks that
time behaves properly. There is also a dangerous mode, which
lets the clock roll over past 2038 on 32bit systems, which
on some older kernels will cause system hangs.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12 13:22:16 -06:00
John Stultz
3a92a15fba selftests/timers: Add set-tai from the timetest suite
This patch adds the set-tai test which ensures the tai offset
can be set properly from adjtimex.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12 13:22:16 -06:00
John Stultz
d7b2902c15 selftests/timers: Add leapcrash test from the timetest suite
This change adds the leapcrash test which tests to see if a
leapsecond deadlock which was observed from 2.6.26 to 3.3
is present on this system.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12 13:22:16 -06:00
John Stultz
5bccfe4153 selftests/timers: Add leap-a-day test from timetest suite
This change adds the leap-a-day test which sets STA_INS and
STA_DEL each day to trigger leapseconds each day. It also
has a mode to jump the time to right before the end of the
day each iteration.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12 13:22:16 -06:00
John Stultz
7290ce1423 selftests/timers: Add clocksource-switch test from timetest suite
Adds the clocksource-switch tests which continually switches the
current clocksource between all the available ones, watching for
any timekeeping inconsistencies.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12 13:22:15 -06:00
John Stultz
6e8b285bcd selftests/timers: Add skew_consistency test from the timetests suite
This change adds the skew_consistency test, which twists the
ADJ_FREQUENCY knob back and forth and watches for timekeeping
inconsistencies.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12 13:22:15 -06:00
John Stultz
d869424558 selftests/timers: Add change_skew test from timetest suite
This patch adds the change_skew test which validates the
adjtimex freq can be set to various values and then using
the inconsistency-check, raw_skew, and nanosleep tests
ensures time behaves properly.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12 13:22:15 -06:00
John Stultz
b7bb8442fa selftests/timers: Add alarmtimer-suspend test from timetests suite
This adds the alarmtimer-suspend test from the timetests suite,
which tests that the alarmtimers wake the system up from suspend
shortly after the time they were set to fire.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12 13:22:14 -06:00