Commit graph

533,096 commits

Author SHA1 Message Date
Julia Lawall
6b9f53bc10 net/mlx5_core: don't export static symbol
The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
type T;
identifier f;
@@

static T f (...) { ... }

@@
identifier r.f;
declarer name EXPORT_SYMBOL;
@@

-EXPORT_SYMBOL(f);
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-12 00:03:34 -04:00
Herbert Xu
84ed82b74d rhashtable: Add annotation to nested lock
Commit aa34a6cb04 ("rhashtable:
Add arbitrary rehash function") killed the annotation on the
nested lock which leads to bitching from lockdep.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-11 23:53:40 -04:00
Eric Dumazet
c29390c6df xps: must clear sender_cpu before forwarding
John reported that my previous commit added a regression
on his router.

This is because sender_cpu & napi_id share a common location,
so get_xps_queue() can see garbage and perform an out of bound access.

We need to make sure sender_cpu is cleared before doing the transmit,
otherwise any NIC busy poll enabled (skb_mark_napi_id()) can trigger
this bug.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: John <jw@nuclearfallout.net>
Bisected-by: John <jw@nuclearfallout.net>
Fixes: 2bd82484bb ("xps: fix xps for stacked devices")
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-11 23:51:18 -04:00
David Vrabel
c8a4d29988 xen-netback: notify immediately after pushing Tx response.
This fixes a performance regression introduced by
7fbb9d8415 (xen-netback: release pending
index before pushing Tx responses)

Moving the notify outside of the spin locks means it can be delayed a
long time (if the dealloc thread is descheduled or there is an
interrupt or softirq).

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Zoltan Kiss <zoltan.kiss@linaro.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-11 23:30:44 -04:00
Eric Dumazet
d77c555d32 net: fix CONFIG_NET_NS=n compilation
I forgot to use write_pnet() in three locations.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: 33cf7c90fe ("net: add real socket cookies")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-11 23:28:49 -04:00
Lubomir Rintel
c78ba6d64c ipv6: expose RFC4191 route preference via rtnetlink
This makes it possible to retain the route preference when RAs are handled in
userspace.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-11 23:28:09 -04:00
Simon Horman
ac70c05b6f switchdev: correct spelling of notifier in comments
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-11 23:06:39 -04:00
Simon Horman
d299ce149c vxlan: Correct path typo in comment
Flags are used in the return path rather than the return patch.

Fixes: af33c1adae ("vxlan: Eliminate dependency on UDP socket in transmit path")
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-11 23:05:38 -04:00
Eric Dumazet
33cf7c90fe net: add real socket cookies
A long standing problem in netlink socket dumps is the use
of kernel socket addresses as cookies.

1) It is a security concern.

2) Sockets can be reused quite quickly, so there is
   no guarantee a cookie is used once and identify
   a flow.

3) request sock, establish sock, and timewait socks
   for a given flow have different cookies.

Part of our effort to bring better TCP statistics requires
to switch to a different allocator.

In this patch, I chose to use a per network namespace 64bit generator,
and to use it only in the case a socket needs to be dumped to netlink.
(This might be refined later if needed)

Note that I tried to carry cookies from request sock, to establish sock,
then timewait sockets.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Eric Salo <salo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-11 21:55:28 -04:00
Alexey Kodanev
b1cb59cf2e net: sysctl_net_core: check SNDBUF and RCVBUF for min length
sysctl has sysctl.net.core.rmem_*/wmem_* parameters which can be
set to incorrect values. Given that 'struct sk_buff' allocates from
rcvbuf, incorrectly set buffer length could result to memory
allocation failures. For example, set them as follows:

    # sysctl net.core.rmem_default=64
      net.core.wmem_default = 64
    # sysctl net.core.wmem_default=64
      net.core.wmem_default = 64
    # ping localhost -s 1024 -i 0 > /dev/null

This could result to the following failure:

skbuff: skb_over_panic: text:ffffffff81628db4 len:-32 put:-32
head:ffff88003a1cc200 data:ffff88003a1cc200 tail:0xffffffe0 end:0xc0 dev:<NULL>
kernel BUG at net/core/skbuff.c:102!
invalid opcode: 0000 [#1] SMP
...
task: ffff88003b7f5550 ti: ffff88003ae88000 task.ti: ffff88003ae88000
RIP: 0010:[<ffffffff8155fbd1>]  [<ffffffff8155fbd1>] skb_put+0xa1/0xb0
RSP: 0018:ffff88003ae8bc68  EFLAGS: 00010296
RAX: 000000000000008d RBX: 00000000ffffffe0 RCX: 0000000000000000
RDX: ffff88003fdcf598 RSI: ffff88003fdcd9c8 RDI: ffff88003fdcd9c8
RBP: ffff88003ae8bc88 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 00000000000002b2 R12: 0000000000000000
R13: 0000000000000000 R14: ffff88003d3f7300 R15: ffff88000012a900
FS:  00007fa0e2b4a840(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000d0f7e0 CR3: 000000003b8fb000 CR4: 00000000000006f0
Stack:
 ffff88003a1cc200 00000000ffffffe0 00000000000000c0 ffffffff818cab1d
 ffff88003ae8bd68 ffffffff81628db4 ffff88003ae8bd48 ffff88003b7f5550
 ffff880031a09408 ffff88003b7f5550 ffff88000012aa48 ffff88000012ab00
Call Trace:
 [<ffffffff81628db4>] unix_stream_sendmsg+0x2c4/0x470
 [<ffffffff81556f56>] sock_write_iter+0x146/0x160
 [<ffffffff811d9612>] new_sync_write+0x92/0xd0
 [<ffffffff811d9cd6>] vfs_write+0xd6/0x180
 [<ffffffff811da499>] SyS_write+0x59/0xd0
 [<ffffffff81651532>] system_call_fastpath+0x12/0x17
Code: 00 00 48 89 44 24 10 8b 87 c8 00 00 00 48 89 44 24 08 48 8b 87 d8 00
      00 00 48 c7 c7 30 db 91 81 48 89 04 24 31 c0 e8 4f a8 0e 00 <0f> 0b
      eb fe 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 48 83
RIP  [<ffffffff8155fbd1>] skb_put+0xa1/0xb0
RSP <ffff88003ae8bc68>
Kernel panic - not syncing: Fatal exception

Moreover, the possible minimum is 1, so we can get another kernel panic:
...
BUG: unable to handle kernel paging request at ffff88013caee5c0
IP: [<ffffffff815604cf>] __alloc_skb+0x12f/0x1f0
...

Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-11 21:25:13 -04:00
Alexander Duyck
654eff4516 fib_trie: Only display main table in /proc/net/route
When we merged the tries for local and main I had overlooked the iterator
for /proc/net/route.  As a result it was outputting both local and main
when the two tries were merged.

This patch resolves that by only providing output for aliases that are
actually in the main trie.  As a result we should go back to the original
behavior which I assume will be necessary to maintain legacy support.

Fixes: 0ddcf43d5 ("ipv4: FIB Local/MAIN table collapse")
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-11 21:24:32 -04:00
Geert Uytterhoeven
6e5e9c6835 ARM: shmobile: r8a7740: Remove restart callback
Remove the restart handling hack from the r8a7740 generic multiplatform
case.

Restart on DT-based r8a7740 platforms is now handled through the
R-Mobile reset driver.

This reverts commit 1174c712af ("ARM: shmobile: r8a7740: Add
restart callback").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-12 08:43:35 +09:00
Geert Uytterhoeven
8883e72da3 ARM: shmobile: R-Car Gen2: CONFIG_COMMON_CLK is always set
Since commit e042681894 ("ARM: shmobile: r8a7790: Remove legacy
code"), all R-Car Gen2 SoCs are supported by multiplatform kernels only.
As CONFIG_COMMON_CLK is always set for multiplatform kernels, we can
remove related #ifdefs in code specific to R-Car Gen2 SoCs.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-12 08:43:34 +09:00
Geert Uytterhoeven
e2fd51b7e1 ARM: shmobile: Remove stray closing parenthesis in debug description
Remove the stray closing parenthesis in the config description for the
DEBUG_RCAR_GEN2_SCIF0 option.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-12 08:43:34 +09:00
Shawn Guo
aaa6d06282 ASoC: kirkwood: fix struct clk pointer comparing
Since commit 035a61c314 ("clk: Make clk API return per-user struct clk
instances"), clk API users can no longer check if two struct clk
pointers are pointing to the same hardware clock, i.e. struct clk_hw, by
simply comparing two pointers.  That's because with the per-user clk
change, a brand new struct clk is created whenever clients try to look
up the clock by calling clk_get() or sister functions like clk_get_sys()
and of_clk_get().  This changes the original behavior where the struct
clk is only created for once when clock driver registers the clock to
CCF in the first place.  The net change here is before commit
035a61c314 the struct clk pointer is unique for given hardware
clock, while after the commit the pointers returned by clk lookup calls
become different for the same hardware clock.

That said, the struct clk pointer comparing in the code doesn't work any
more.  Call helper function clk_is_match() instead to fix the problem.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-03-11 16:00:41 -07:00
Shawn Guo
81efec8514 ASoC: fsl_spdif: fix struct clk pointer comparing
Since commit 035a61c314 ("clk: Make clk API return per-user struct clk
instances"), clk API users can no longer check if two struct clk
pointers are pointing to the same hardware clock, i.e. struct clk_hw, by
simply comparing two pointers.  That's because with the per-user clk
change, a brand new struct clk is created whenever clients try to look
up the clock by calling clk_get() or sister functions like clk_get_sys()
and of_clk_get().  This changes the original behavior where the struct
clk is only created for once when clock driver registers the clock to
CCF in the first place.  The net change here is before commit
035a61c314 the struct clk pointer is unique for given hardware
clock, while after the commit the pointers returned by clk lookup calls
become different for the same hardware clock.

That said, the struct clk pointer comparing in the code doesn't work any
more.  Call helper function clk_is_match() instead to fix the problem.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-03-11 16:00:22 -07:00
Shawn Guo
a51139fdbc ARM: imx: fix struct clk pointer comparing
Since commit 035a61c314 ("clk: Make clk API return per-user struct clk
instances"), clk API users can no longer check if two struct clk
pointers are pointing to the same hardware clock, i.e. struct clk_hw, by
simply comparing two pointers.  That's because with the per-user clk
change, a brand new struct clk is created whenever clients try to look
up the clock by calling clk_get() or sister functions like clk_get_sys()
and of_clk_get().  This changes the original behavior where the struct
clk is only created for once when clock driver registers the clock to
CCF in the first place.  The net change here is before commit
035a61c314 the struct clk pointer is unique for given hardware
clock, while after the commit the pointers returned by clk lookup calls
become different for the same hardware clock.

That said, the struct clk pointer comparing in the code doesn't work any
more.  Call helper function clk_is_match() instead to fix the problem.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-03-11 16:00:20 -07:00
Michael Turquette
3d3801effd clk: introduce clk_is_match
Some drivers compare struct clk pointers as a means of knowing
if the two pointers reference the same clock hardware. This behavior is
dubious (drivers must not dereference struct clk), but did not cause any
regressions until the per-user struct clk patch was merged. Now the test
for matching clk's will always fail with per-user struct clk's.

clk_is_match is introduced to fix the regression and prevent drivers
from comparing the pointers manually.

Fixes: 035a61c314 ("clk: Make clk API return per-user struct clk instances")
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
[arnd@arndb.de: Fix COMMON_CLK=N && HAS_CLK=Y config]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[sboyd@codeaurora.org: const arguments to clk_is_match() and
remove unnecessary ternary operation]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-03-11 15:56:59 -07:00
Julia Lawall
f55ac0655a clk: don't export static symbol
The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
type T;
identifier f;
@@

static T f (...) { ... }

@@
identifier r.f;
declarer name EXPORT_SYMBOL_GPL;
@@

-EXPORT_SYMBOL_GPL(f);
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Fixes: 035a61c314 "clk: Make clk API return per-user struct clk instances"
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-03-11 15:53:18 -07:00
Arnd Bergmann
7234bea69d mtd: clean up whitespace in linux/mtd/map.h
As the only comments I got for the "mtd: cfi: reduce stack size"
patch were about whitespace changes, it appears necessary to fix
up the rest of the file as well, which contains the exact same
mistakes.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-03-11 15:25:56 -07:00
Arnd Bergmann
d09957fbb4 mtd: cfi: reduce stack size
The cfi_staa_write_buffers function uses a large amount of kernel stack
whenever CONFIG_MTD_MAP_BANK_WIDTH_32 is set, and that results in a
warning on ARM allmodconfig builds:

drivers/mtd/chips/cfi_cmdset_0020.c: In function 'cfi_staa_write_buffers':
drivers/mtd/chips/cfi_cmdset_0020.c:651:1: warning: the frame size of 1208 bytes is larger than 1024 bytes [-Wframe-larger-than=]

It turns out that this is largely a result of a suboptimal implementation
of map_word_andequal(). Replacing this function with a straightforward
one reduces the stack size in this function by exactly 200 bytes,
shrinks the .text segment for this file from 27648 bytes to 26608 bytes,
and makes the warning go away.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-03-11 15:25:51 -07:00
Brian Norris
0ec56dc4a1 mtd: nand: fully initialize mtd_oob_ops
We're not initializing the ooblen field. Our users don't care, since
they check that oobbuf == NULL first, but it's good practice to zero
unused fields out.

We can drop the NULL initializations since we're memset()ing the whole
thing.

Noticed by Coverity, CID #200821, #200822

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-03-11 15:21:48 -07:00
Brian Norris
e22b7651ef mtd: blkdevs: remove dead code
The only exit (break) from the preceding loop is nested within a
condition which yields req == NULL. This code is dead.

Coverity CID #752669

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-03-11 15:21:48 -07:00
Brian Norris
99f6d50dc8 mtd: nand: denali: drop dead code
TclsRising is always 1.

Caught by Coverity.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-03-11 15:21:48 -07:00
Brian Norris
b1a2348a1a mtd: nand: fixup bounds checks for nand_{lock,unlock}()
Coverity noticed that these 'ret' assignments weren't being used. Let's
use them.

Note that nand_lock() and nand_unlock() are still not officially used by
any drivers.

Coverity CIDs #1227054 and #1227037

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-03-11 15:21:48 -07:00
Brian Norris
b9da8bae41 mtd: tests: fix more potential integer overflows
Caught by Coverity (CID #200625 and others)

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
2015-03-11 15:21:47 -07:00
Brian Norris
7f2a7ce17d mtd: onenand: drop dead code
'ret' is always zero, so this is all dead code.

This should quiet Coverity CID #1226739.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
2015-03-11 15:21:47 -07:00
Brian Norris
dc52499e7f mtd: docg3: drop dead code
If no devices were found, we would already have skipped over this code.

Detected by Coverity, CID #744270

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-03-11 15:21:19 -07:00
Uwe Kleine-König
98ebb52109 mtd: mxc-nand: Warn on unimplemented commands
The PARAM command was long unimplemented and it probably wasn't
noticed because chip probing using only the few bytes returned by the
READID command are good enough in most cases to determine the chip in
use.

Still to notice such a shortcoming earlier in the future would be nice
in case it's something more vital.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-03-11 15:20:42 -07:00
Uwe Kleine-König
3d6e81c0c9 mtd: mxc-nand: Implement support for PARAM command
The mxc-nand driver never supported the PARAM command to read out the
ONFI parameter page and so always relied on probing my manufacturer and
device id (as provided by the READID command).

This patch implements reading out the first parameter page copy at least
which should be good enough in practise.

This makes the boot log change from

	nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xb1
	nand: Micron NAND 128MiB 1,8V 16-bit

to
	nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xb1
	nand: Micron MT29F1G16ABBDAH4

on my machine.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-03-11 15:20:41 -07:00
Uwe Kleine-König
c4ca3997ef mtd: mxc-nand: Allow to use column addresses different from 0
The mxc-nand controller works pagewise and so usually only sends
commands to the flash chip with column == 0. A request with column != 0
from the upper layer is then fulfilled by indexing appropriately into the
device's RAM buffer.

To be able to access the ONFI marker at offset 0x20 in reply to the
READID command however it's invalid to read 32 bytes starting from
column 0.

So let the function used to send the address cycles send the column
address actually passed instead of 0 and fix all callers to pass 0
instead appropriately. Also add some warnings in case this patch changes
the drivers semantics.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-03-11 15:20:29 -07:00
Uwe Kleine-König
3f410690f5 mtd: mxc-nand: Do the word to byte mangling in the read_byte callback
When the hardware operates in 16 bit mode it always reads 16 bits even
for operations that only have the lower 8 bits defined. So the upper
bits must be discarded. Do this in the read_byte callback instead of
when reading the NAND id to support reading byte wise more than 5 bytes
and at other occations (like reading the ONFI parameter page).

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-03-11 15:20:29 -07:00
Uwe Kleine-König
1f42adc888 mtd: mxc-nand: Only enable hardware checksumming for fully detected flashes
At least on i.MX25 (i.e. NFCv2) preset_v2 is called with mtd->writesize
== 0 that is before the connect flash chip is detected. It then
configures for 8 bit ECC mode which needs 26 bytes of OOB per 512 bytes
main section. For flashes with a smaller OOB area issuing a read page
command makes the controller stuck with this config.

Note that this currently doesn't hurt because the first read page
command is issued only after detection is complete and preset is called
once more.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-03-11 15:20:19 -07:00
Uwe Kleine-König
e35d1d8a1d mtd: mxc-nand: Add a timeout when waiting for interrupt
While extending the mxc-nand driver it happend to me a few times that
the device was stuck and this made the machine hang during boot. So
implement a timeout and print a stack trace the first time this happens
to make it debuggable. The return type of the waiting function is also
changed to int to be able to handle the timeout in the caller.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-03-11 15:20:11 -07:00
Arnd Bergmann
c98ce6bf1a mvebu soc changes for v4.1 (part #1)
- Add support for a new SoC: Armada 39x
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlT9RvwACgkQCwYYjhRyO9UGwQCfXlE0v/h5zAG6j/LTAFuMLP3w
 ZqoAmwZErUyIkfr00w9KyOgLxnYefTJ6
 =q2zn
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-soc-4.1' of git://git.infradead.org/linux-mvebu into next/soc

Pull "mvebu soc changes for v4.1 (part #1)" from Gregory CLEMENT:

- Add support for a new SoC: Armada 39x

* tag 'mvebu-soc-4.1' of git://git.infradead.org/linux-mvebu:
  Documentation: arm: update supported Marvell EBU processors
  ARM: mvebu: add core support for Armada 39x
  devicetree: bindings: add new SMP enable method for Marvell Armada 39x
  devicetree: bindings: add DT binding for the Marvell Armada 39x SoC family
2015-03-11 23:14:28 +01:00
Arnd Bergmann
b1bfa919f0 mvebu defconfig changes for v4.1 (part #1)
- add the new Armada 39x SoC in mvebu_v7_defconfig
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlT9R2MACgkQCwYYjhRyO9UOLQCfeQuNL/nHDlc+0GanS9pBAyil
 sBMAoKGEjhdA1NTfnykWexg3Ml4BwVX4
 =VaQQ
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-defconfig-4.1' of git://git.infradead.org/linux-mvebu into next/defconfig

Pull "mvebu defconfig changes for v4.1 (part #1)" from Gregory CLEMENT:

- add the new Armada 39x SoC in mvebu_v7_defconfig

* tag 'mvebu-defconfig-4.1' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: enable Armada 39x in mvebu_v7_defconfig
2015-03-11 23:09:05 +01:00
Arnd Bergmann
4c0714290c mvebu clean-up changes for v4.1 (part #1)
- Constify the dt_compat table in DT_MACHINE_START
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlT9Re4ACgkQCwYYjhRyO9WLaQCfeTz2auqoPt5vXTJjs9/sXLEL
 dQIAnjPIpZfLVBnNo1BzK96RUYHEJ20+
 =QIYe
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-cleanup-4.1' of git://git.infradead.org/linux-mvebu into next/cleanup

Pull "mvebu clean-up changes for v4.1 (part #1)" from Gregory CLEMENT:

- Constify the dt_compat table in DT_MACHINE_START

* tag 'mvebu-cleanup-4.1' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: add __initconst specifiers on DT_MACHINE_START dt_compat tables
2015-03-11 23:02:22 +01:00
Zhizhou Zhang
c4bb799588 arm64: Add support for Spreadtrum's Sharkl64 Platform in Kconfig and defconfig
Adds support for Spreadtrum's SoC Platform in the arm64 Kconfig and
defconfig files.

Signed-off-by: Zhizhou Zhang <zhizhou.zhang@spreadtrum.com>
Signed-off-by: Orson Zhai <orson.zhai@spreadtrum.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
2015-03-11 23:00:21 +01:00
Zhizhou Zhang
c46388a586 arm64: dts: Add support for Spreadtrum SC9836 SoC in dts and Makefile
Adds the device tree support for Spreadtrum SC9836 SoC which is based on
Sharkl64 platform.

Sharkl64 platform contains the common nodes of Spreadtrum's arm64-based SoCs.

Signed-off-by: Zhizhou Zhang <zhizhou.zhang@spreadtrum.com>
Signed-off-by: Orson Zhai <orson.zhai@spreadtrum.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-03-11 22:59:48 +01:00
Michal Simek
5d1b79d2b2 ARM64: Add new Xilinx ZynqMP SoC
Initial version of device tree for Xilinx ZynqMP SoC.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-03-11 22:57:06 +01:00
David S. Miller
388a83576a Merge branch 'dsa_phy_divert'
Florian Fainelli says:

====================
net: dsa: support PHY reads/writes diversion

This patch series completes the PHY reads/writes diversion when we need to use
the slave MII bus provided by DSA and the underlying switch drivers to
implement the real PHY reads and writes. This is particularly useful when they
are conflicting MDIO bus addresses as in the case of multiple Broadcom switches
connected to each other (internal and external, or just external).
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-11 17:56:39 -04:00
Florian Fainelli
cd28a1a9ba net: dsa: fully divert PHY reads/writes if requested
In case a PHY is found via Device Tree, and is also flagged by the
switch driver as needing indirect reads/writes using the switch driver
implemented MDIO bus, make sure that we bind this PHY to the slave MII
bus in order for this to happen.

Without this, we would succeed in having the PHY driver probe()'s
function to use slave MII bus read/write functions, because this is done
during dsa_slave_mii_init(), but past that point, the PHY driver would
not go through these diverted reads and writes.

Fixes: 0d8bcdd383 ("net: dsa: allow for more complex PHY setups")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-11 17:56:29 -04:00
Florian Fainelli
c305c1651c net: dsa: move PHY setup on DSA MII bus to its own function
In preparation for dealing with indirect reads and writes towards
certain PHY devices, move the code which deals with binding the PHY
device to the slave MII bus created by DSA to its own function:
dsa_slave_phy_connect().

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-11 17:56:28 -04:00
Florian Fainelli
33d6737761 of: mdio: export of_mdio_parse_addr
Export of_mdio_parse_addr() which allows parsing a given Ethernet PHY
node MDIO address, verify it is within the allowed range, and return
its value. This is going to be useful for the DSA code which needs to
deal with multiple layers of MDIO buses.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-11 17:56:28 -04:00
Arnd Bergmann
05e6d23296 Second Round of Renesas ARM Based SoC DT Updates for v4.1
* ape6evm board
   - Configure GPIO keys as wake-up source
   - Enable pull-up for GPIO switches
   - Correct polarity of LEDs
 * r8a7791 SoC
   - Correct IPMMU-GP clock to device tree
 * r8a7794 SoC
   - Correct ethernet controller PHY IRQ
 * lager, koelsch and marzen boards
   - Add DU external pixel clock to DT
 * lager board
   - Add HDMI output support to DT
 * r8a7791 and r8a7790 SoCs
   - Tidy up SDHI register size in DT
   - Reference DMA channels for SDHI in DT
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU/j1NAAoJENfPZGlqN0++EcUQAJnDAqO6jtSdPiu8HUNMHDnO
 HKrIbh9VE/rbn2HPcwP4MfIxbwNPe6ezTq99e+ckor2ThzxtQ9uxv4nPEoY/wGSh
 kNq2LALlfa6VFqezD/2V8mroI5o9ZtzRV2uv07U8L7VxVFO0VA3oYqDYDBudhINa
 nD2OmtZhCEgrZXZEWxCqrvHzWGWVYARMiW88ZVZ8VTge+I6Cy/U3Cw+MOfFTI/DP
 ej/I9nK+JnWbnxduFhHNX+VECT1aGqDhltKLMlagEUbJJtHl4VlAcvisSoYBE8VU
 E+Di4WawKVtukkbVhnc5ArYYemjpawYV29FYqbPBpgo/uW87mm8V+Sfj0m0v5iPa
 JxA90PPf7pauauI+eGk1J9BGeUmt2rqZpvh9/InaZbT0QY38/LNW767AC5i3QUg4
 u94tied7GPFpq8VFuD925LOVfgvXX8aFgKP/kf764pN0qcNpRfcC7lEdV/kFRoNB
 6JmRj0NTKvxKPKtlr/NteiD8+c2UkAMO+yDa79FmrImh8+OBMBj4t9BUjbEMfrFd
 tTdvLzN4cRahVWaot5GTMLbbD9VLO8/2wOfv+43xXnKER4xPxgDwI5O6WHMJbJsT
 Q+onSaP/jEe/VdsaOax5iPQ3P+Sv/zLS+rFEmoYBewqDdAtKnjUcjn3tvumjTLqU
 hnIDRuS8grpcgpIk0vpw
 =lxzo
 -----END PGP SIGNATURE-----

Merge tag 'renesas-dt2-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Pull "Second Round of Renesas ARM Based SoC DT Updates for v4.1" from Simon Horman:

* ape6evm board
  - Configure GPIO keys as wake-up source
  - Enable pull-up for GPIO switches
  - Correct polarity of LEDs
* r8a7791 SoC
  - Correct IPMMU-GP clock to device tree
* r8a7794 SoC
  - Correct ethernet controller PHY IRQ
* lager, koelsch and marzen boards
  - Add DU external pixel clock to DT
* lager board
  - Add HDMI output support to DT
* r8a7791 and r8a7790 SoCs
  - Tidy up SDHI register size in DT
  - Reference DMA channels for SDHI in DT

* tag 'renesas-dt2-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: ape6evm dts: Configure the custom switch as wake-up source
  ARM: shmobile: ape6evm dts: Enable pull-up for GPIO switches
  ARM: shmobile: r8a7791: Fix IPMMU-GP clock to device tree
  ARM: shmobile: r8a7794: alt: Fix ethernet controller PHY IRQ line
  ARM: shmobile: lager: Add DU external pixel clocks to DT
  ARM: shmobile: koelsch: Add DU external pixel clocks to DT
  ARM: shmobile: marzen: Add DU external pixel clock to DT
  ARM: shmobile: ape6evm dts: Fix polarity of LEDs
  ARM: shmobile: lager: Add DU HDMI output support
  ARM: shmobile: r8a7791: Fix HSUSB clock to hp_clk from mp_clk
  ARM: shmobile: r8a7790: Fix HSUSB clock to hp_clk from mp_clk
  ARM: shmobile: r8a7791: tidyup SDHI register size on DTSI
  ARM: shmobile: r8a7790: tidyup SDHI register size on DTSI
  ARM: shmobile: r8a7791: Reference DMA channels in SDHI DT nodes
  ARM: shmobile: r8a7790: Reference DMA channels in SDHI DT nodes
2015-03-11 22:54:57 +01:00
Petri Gynther
d26ea6cc48 net: bcmgenet: collect Rx discarded packet count
Bits 31:16 of RDMA_PROD_INDEX contain Rx discarded packet count, which
are the Rx packets that had to be dropped by MAC hardware since there
was no room on the Rx queue. Add code to collect this information into
the netdev stats.

Signed-off-by: Petri Gynther <pgynther@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-11 17:54:55 -04:00
Arnd Bergmann
094a29d023 mvebu dt changes for v4.1 (part #1)
- fix SDHCI nodes on Armada 38x
 - add Linksys WRT1900AC (Mamba) support (including the Ethernet switch)
 - add several fixes and improvement for dove
 - enable GPIO fan alarm support for 2Big Network v2
 - add several fixes about unit address
 - add support for Armada 39x SoC and board
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlT9S+0ACgkQCwYYjhRyO9XSkQCfcrsiF6bS+B1B9Gdu+nBwyXdC
 BHYAmwUm92D7yH8ePjbKldM4ONM1315b
 =yn/6
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-dt-4.1' of git://git.infradead.org/linux-mvebu into next/dt

Pull "mvebu dt changes for v4.1 (part #1)" from Gregory CLEMENT:

- fix SDHCI nodes on Armada 38x
- add Linksys WRT1900AC (Mamba) support (including the Ethernet switch)
- add several fixes and improvement for dove
- enable GPIO fan alarm support for 2Big Network v2
- add several fixes about unit address
- add support for Armada 39x SoC and board

* tag 'mvebu-dt-4.1' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: add Device Tree files for Armada 39x SoC and board
  ARM: mvebu: fix unit address of MPIC nodes
  ARM: mvebu: use stdout-path in all armada-*.dts
  ARM: mvebu: add serial port aliases on Armada 370/375/38x/XP
  ARM: mvebu: remove aliases for Ethernet devices on Armada 370/375/38x/XP
  ARM: mvebu: add UART labels to Armada 375
  ARM: mvebu: add missing UART labels on Armada 38x
  ARM: mvebu: fix usb@ unit address on Armada 38x to match register address
  ARM: mvebu: a385-db-ap: Enable the NAND
  ARM: ARMADA XP: WRT1900AC: Add support for the Ethernet switch
  ARM: Kirkwood: enable GPIO fan alarm support for 2Big Network v2
  ARM: mvebu: Fix MPIC unit address
  ARM: dts: dove: Add some more common pinctrl settings
  ARM: dts: dove: Add node labels for PCIe ports 0 and 1
  ARM: dts: dove: Always include gpio and interrupt-controller headers
  ARM: dts: dove: Fix uart[23] reg property
  ARM: mvebu: add Linksys WRT1900AC (Mamba) support
  ARM: mvebu: Add Device Tree description of SDHCI for Armada 388 RD
  ARM: mvebu: Update the SDHCI node on Armada 38x
  ARM: mvebu: Use macros for interrupt flags on Armada 38x sdhci node
2015-03-11 22:53:16 +01:00
Arnd Bergmann
4d0b756ec7 Merge tag 'arm-soc/for-4.1/devicetree' of http://github.com/broadcom/stblinux into next/dt
Pull "Broadcom Device Tree changes for 4.1 #1" from Florian Fainelli:

This pull request contains the following Broadcom SoCs Device Tree changes:

- Jonathan adds support for the Broadcom Cygnus BCM958305K board

- Rafal adds support for Netgear R8000 and fixes the default for power LEDs
  on Netgear R6250

* tag 'arm-soc/for-4.1/devicetree' of http://github.com/broadcom/stblinux:
  ARM: BCM5301X: Fix default state of power LEDs on Netgear R6250
  ARM: BCM5301X: Add DT for Netgear R8000
  ARM: dts: Enable Broadcom Cygnus BCM958305K
2015-03-11 22:51:11 +01:00
Arnd Bergmann
e3d00145e3 First batch of DT changes for 4.1:
- at91sam9x5 & EK board: ISI and camera sensors
 - at91sam9n12 & EK board: USB gadget nodes
 - sama5d3: typos, gpio-keys on Xplained board
 - sama5d4: i2c, leds, audio, ISI, crypto, pwm missing nodes
 - new sama5d4 xplained board
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJU+yDTAAoJEAf03oE53VmQMzEIAM6a3qG3+W7qFG5e0EQtTP+c
 Y5o0P2Q6Va0flxl1b/wEmtFnm4dZL0S/rwGO1VlnRBW5fE949jV3wfqNfMub5qiD
 9rW58SAR45NJLsArYP22DXnxy9YP3auQF10LvLWiWr/cDKAOYDs3P0PV5fWDhjED
 DKwh0dUdIhmVOSeR/0RJfDiEV2FIMGO+6xcWucI/SAMGvmD+pZiVARAGSfcB05Wi
 CMCZI/k5/JdFTXE6Dh7uUTxNqCpaQUy7BZNdl1Dr2YrkdLIHR+/FgpEu1V24Btx5
 i+mLApiQgfwZ3+eDlUnn4X1px3jMqEHnKIlBqNhT63hDhagupHcui1WnCI6hlSw=
 =/mm0
 -----END PGP SIGNATURE-----

Merge tag 'at91-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/dt

Pull "First batch of DT changes for 4.1" into next/dt:

- at91sam9x5 & EK board: ISI and camera sensors
- at91sam9n12 & EK board: USB gadget nodes
- sama5d3: typos, gpio-keys on Xplained board
- sama5d4: i2c, leds, audio, ISI, crypto, pwm missing nodes
- new sama5d4 xplained board

* tag 'at91-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: (31 commits)
  ARM: at91/dt: sama5d4: add ISI dt support
  ARM: at91/dt: sama5d4: add pwm0 device node
  ARM: at91/dt: sama5d4: add aes, sha and tdes nodes
  ARM: at91: dt: sama5d4ek: enable audio
  ARM: at91: dt: sama5d4ek: add and enable wm8904
  ARM: at91: dt: sama5d4ek: enable ssc0
  ARM: at91: dt: sama5d4: add ssc nodes
  ARM: at91/dt: sama5d4 xplained: add i2c0
  ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board
  ARM: at91/dt: sama5d4: add #{address, size}_cells properties for macb0
  ARM: at91/dt: sama5d4ek: add leds in DT node
  ARM: at91/dt: add i2c1 declaration to sama5d4
  ARM: at91/dt: gpio-keys: address-cells and size-cells properties are not needed
  ARM: at91/dt: at91-sama5d3_xplained: add gpio-key pinctrl property
  ARM: at91/dt/trivial: correct file headers for SAMA5D3 SoC peripherals
  ARM: at91/dt: at91sam9n12ek: enable udp
  ARM: at91/dt: at91sam9n12: add udp device node
  ARM: at91: at91sam9g25ek/dts: enable ISI and ov2640
  ARM: at91: at91sam9x5ek/dts: add ov2640 support
  ARM: at91: at91sam9x5/dts: add ISI dt support, include isi node, pinctrls
  ...
2015-03-11 22:48:55 +01:00
Chris Zhong
a0307d186f ARM: rockchip: disable watchdog during suspend
The watchdog clock should be disable in dw_wdt_suspend, but we set a
dummy clock to watchdog for rk3288. So the watchdog will continue to
work during suspend. And we switch the system clock to 32khz from 24Mhz,
during suspend, so the watchdog timer over count will increase to
755 times, about 12.5 hours, the original value is 60 seconds. So
watchdog will reset the system over a night,  but voltage are all
incorrect, then it hang on reset.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Daniel Kurtz <djkurtz@google.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Tested-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-03-11 22:41:02 +01:00