Commit graph

533,096 commits

Author SHA1 Message Date
Takashi Iwai
709949fbe9 ALSA: hda - Power down codec automatically at registration
So far, we let the controller driver power down the all codecs at the
end of probe.  But this can be done better in the codec's dev_register
callback.  This results in the reduction of duplicated codes in each
control driver.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-26 15:37:08 +01:00
Takashi Iwai
55ed9cd1fe ALSA: hda - Replace bus pm_notify with the standard runtime PM framework
Now the final bit of runtime PM cleanup: instead of manual
notification of the power up/down of the codec via hda_bus pm_notify
ops, use the standard runtime PM feature.

The child codec device will kick off the runtime PM of the parent
(PCI) device upon suspend/resume automatically.  For managing whether
the link can be really turned off, we use the bit flags
bus->codec_powered instead of the earlier bus->power_keep_link_on.
flag.  Each codec driver is responsible to set/clear the bit flag, and
the controller device can be turned off only when all these bits are
cleared.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-26 15:37:02 +01:00
Takashi Iwai
bb573928e1 ALSA: hda - Drop power_save value indirection in hda_bus
We used to pass the power_save option value to hda_bus via a given
pointer.  This was needed to refer to the value from the HD-audio core
side.  However, after the transition to the runtime PM, this is no
longer needed.

This patch drops the power_save value indirection in hda_bus above,
and let the controller driver reprograms the autosuspend value
explicitly by a new helper, snd_hda_set_power_save().  Without this
call, the HD-audio core doesn't set up the autosuspend and flip the
runtime PM.  (User may still be able to set up via sysfs, though.)

Along with this change, the pointer argument of azx_bus_create() is
dropped as well.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-26 15:36:52 +01:00
Michel Thierry
719cd21ced drm/i915: Add missing description to parameter in alloc_pt_range
The patch "drm/i915: Plumb drm_device through page tables operations"
added an extra parameter, but it didn't update the function description.
Also remove unnecessary blank line added by the same patch.

Found by kbuild test robot.

Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-26 14:30:26 +01:00
Akash Goel
bc4d91f699 drm/i915: Removed the read of RP_STATE_CAP from sysfs/debugfs functions
The frequency values(Rp0, Rp1, Rpn) reported by RP_STATE_CAP register
are stored, initially by the Driver, inside the dev_priv->rps structure.
Since these values are expected to remain same throughout, there is no real
need to read this register, on dynamic basis, from certain debugfs/sysfs
functions and the values can be instead retrieved from the dev_priv->rps
structure when needed.
For the i915_frequency_info debugfs interface, the frequency values from the
RP_STATE_CAP register only should be used, to indicate the actual Hw state,
since it is principally used for the debugging purpose.

v2: Reverted the changes in i915_frequency_info function, to continue report
    back the frequency values, as per the actual Hw state (Chris)

Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-26 14:29:21 +01:00
Ander Conselvan de Oliveira
b4f2bf4c02 drm/i915: Look at staged config when fixing pipe_src_w for LVDS
The code in function intel_crtc_compute_config() that evens pipe_src_w
if necessary would look at the current config instead of the staged one
when deciding if there is an LVDS encoder in use. This could potentially
lead to the value not being updated, if during the modeset a crtc wasn't
driving an LVDS encoder.

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-26 14:26:43 +01:00
Leon Nardella
0088d27b78 ath9k_htc: Add new USB ID
This device is a dongle made by Philips to enhance their TVs with wireless capabilities,
but works flawlessly on any upstream kernel, provided that the ath9k_htc module is attached to it.
It's correctly recognized by lsusb as "0471:209e Philips (or NXP) PTA01 Wireless Adapter" and the
patch has been tested on real hardware.

Signed-off-by: Leon Nardella <leon.nardella@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26 15:20:38 +02:00
Nicolas Ferre
0bb59cb00e drm: atmel-hlcdc: remove clock polarity from crtc driver
Remove this configuration bit in crtc driver as the rising edge clock is widely
used.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-02-26 14:19:13 +01:00
Jes Sorensen
52f5780494 rtlwifi: Clear ACM_CTRL AC3_VO bit correctly
All hw driver components in the rtlwifi driver, except for the
rtl8192de component has this bug. They would clear BE bit in the
ACM_CTRL register instead of the VO bit when processing the VO queue.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26 15:16:45 +02:00
Hante Meuleman
661fa95ddb brcmfmac: Fix escan timer causing oops.
In some rare circumstances the escan protection timer can expire
before the setup completed (due to long timeouts on IOCTL). This
patch avoids this situation by setting the timer after the setup
completed correctly.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26 15:14:23 +02:00
Hante Meuleman
a7b134a767 brcmfmac: Dont sleep when ctrl frames to transmit.
The SDIO watchdog will put the device in sleep mode when there is
no activity for some time and nothing to do anymore. This check
is incomplete and should also check if there is a control frame
to transmit.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26 15:14:21 +02:00
Arend van Spriel
9982464379 brcmfmac: make sdio suspend wait for threads to freeze
Borrowed the idea of the PM freezer to make sdio suspend wait for
watchdog and DPC thread to freeze at a safe point in their thread
routine. The suspend takes 20-25 msec.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26 15:14:19 +02:00
Arend van Spriel
c7cd5d27d8 brcmfmac: add debugfs file containing revision info
Make the revision info visible in debugfs. The new debugfs
file is named 'revinfo'.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26 15:14:18 +02:00
Hante Meuleman
ad5a52518a brcmfmac: Remove error print for invalid key index.
When a key is set or cleared with an unsupported key index then
brcmfmac will print an error. With most wpa_supplicants this is
happening a lot. The error print is confusing and not needed.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26 15:14:16 +02:00
Arend van Spriel
a1ce7a0d6a brcmfmac: use helper function for changing SDIO state
Changing the SDIO state of the driver involves changing the bus
interface state. Adding a helper function makes sure that knowledge
is in one place.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26 15:14:14 +02:00
Avinash Patil
ffdcad0596 mwifiex: use alloc_workqueue's format strings capabilities for WQ names
alloc_workqueue() has string format formation ability e.g. wqname%ifname
will be treated as wqnameifname. Use this and remove string operations
while defining strings for workqueue names.

Reported-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26 15:05:30 +02:00
Nicholas Mc Guire
01317c2641 brcm80211: drop unreachable else case
the if/elseif/else is exhaustive - there is no 4th case given the
  rssi_ctrl_mask = RADIO_2055_NBRSSI_SEL | RADIO_2055_WBRSSI_G1_SEL |
  RADIO_2055_WBRSSI_G2_SEL;
so this unreachable else case (dead code) can be dropped.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26 15:03:12 +02:00
Nicholas Mc Guire
187d3c3386 brcmfmac: use msecs_to_jiffies for time conversion
This is only an API consolidation and should make things more readable
it replaces var * HZ / 1000 by msecs_to_jiffies(var).

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Acked-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26 15:01:30 +02:00
Sujith Manoharan
aa96af82b8 ath9k: Restart TSF2 timers on wakeup
When coming out of WoW sleep, check and restart
timers based on TSF2.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26 14:58:46 +02:00
Sujith Manoharan
3277b20270 ath9k: Clear additional WoW events
The events for patterns 8..15 need to be
cleared on wakeup.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26 14:58:43 +02:00
Sujith Manoharan
6aaefab6cf ath9k: Handle additional patterns on wakeup
Handle the user-configured patterns in the range 8..15
when waking up and update wow_status correctly.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26 14:58:41 +02:00
Sujith Manoharan
b39adc63bf ath9k: Check MCI PowerSave state
The power save state of MCI has to be disabled
when enabling WoW sleep, check this properly.
ar9003_mci_state() doesn't handle MCI_STATE_GET_WLAN_PS_STATE
right now, but this will be done later when proper
support for MCI/PS is added.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26 14:58:39 +02:00
Sujith Manoharan
ff6f0c036b ath9k: Add new MCI states
Several new MCI states have to handled,
add them to the list.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26 14:58:38 +02:00
Sujith Manoharan
0d35024cad ath9k: Set keep awake timer
When MCI is enabled and WoW sleep is enabled,
make sure that the RTC keep awake timer is set
with the required value. This is also required
when the AR_WA is programmed.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26 14:58:35 +02:00
Sujith Manoharan
2a0eef1ac6 ath9k: Fix descriptors for keep-alive frame
Along with AR9462, AR9565 also has an extra field
in the TX descriptor which needs to be zeroed out
for the keep alive frame. This makes the earlier
REG_WRITE redundant, so it can be removed.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26 14:58:34 +02:00
Shannon Nelson
65d13461d7 i40e: check pointers before use
Make sure we don't try to dereference NULL pointers when returning values
from the AdminQ calls.

Change-ID: Ia6694f2f415d50acf0aba063c863568742799aff
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26 04:54:03 -08:00
Shannon Nelson
2c47e351f6 i40e: catch NVM write semaphore timeout and retry
In some circumstances, a multi-write transaction takes longer than the
default 3 minute timeout on the write semaphore.  If the write failed with
an EBUSY status, this is likely the problem, so here we try to reacquire
the semaphore then retry the write.  We only do one retry, then give up.

Change-ID: I1c8be60688acc2f39573839579baf601207c4a36
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26 04:54:03 -08:00
Mitch A Williams
33c62b34e5 i40e: stop flow director on shutdown
In some cases, the hardware would continue to try to access the FDIR
ring after entering D3Hot state, which would cause either PCIe errors or
NMIs, depending upon system configuration.

Explicitly stop FDIR in our shutdown routine to eliminate this
possibility.

Change-ID: I1bd9fc7fd8f151fe24cad132ac9adddab923e3af
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26 04:54:02 -08:00
Shannon Nelson
e147758d9a i40e: disconnect irqs on shutdown
Combine the ICR0 shutdown with the standard interrupt shutdown, and
add the interrupt clearing to the PCI shutdown path.

This prevents the driver from allowing stray interrupts or causing
system logs from un-handled interrupts.

Change-ID: I48f6ab95cad7f8ca77c1f26c92a51cc1034ced43
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26 04:54:02 -08:00
Anjali Singhai
85e76d0312 i40evf: TCP/IPv6 over Vxlan Tx checksum offload fix
We were checking the outer Protocol flags and deciding the flow for
inner header. This patch fixes that.
This fixes the Tx checksum offload for TCP/IPv6 over vxlan.

Change-ID: I837aaea921d34f71b24c2bc32aaadea5001ddf78
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26 04:54:01 -08:00
Parikh, Neerav
11e4770842 i40e: Issue a PF reset if Tx queue disable timeout
As part of DCB reconfiguration flow if the Tx queue disable times out
then issue a PF reset to do some level of recovery.

Change-ID: I7550021c55bff355351c0365e61e1f05fcaff46d
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26 04:54:00 -08:00
Parikh, Neerav
cd238a3ecf i40e: Fix the Tx ring qset handle when DCB reconfigures
When DCB is reconfigured to single TC the driver did not reset the
Tx ring Qset handle to the correct mapping; which caused Tx queue
disable timeouts.

Change-ID: I4da5915ec92a83c281b478d653fae6ef1b72edfe
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26 04:54:00 -08:00
Anjali Singhai
7f9ff47683 i40e: Fix the case where per TC queue count was higher than queues enabled
When the driver or hardware gets less interrupt vectors than the actual
number of CPU cores, limit the queue count for the priority queue
traffic class (TC) queues.

This will fix a warning with multiple function mode where systems
regularly have more cores than vectors.

Also add extra comment for readability.

Change-ID: I4f02226263aa3995e1f5ee5503eac0cd6ee12fbd
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Tested-by: Jim Young  <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26 04:53:59 -08:00
Jesse Brandeburg
a68de58d27 i40e: fix race in hang check
The driver was having some issues with false Tx hang detection. This
makes the driver a little more direct with the checks for progress
forward by directly checking the head write back address and tail register
when determining progress.  This avoids Tx hangs where the software
gets behind, because we are directly checking hardware state when
determining hang state.

Change-ID: I774f0e861c9e8ab5ccb213634100fe15440ae24a
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26 04:53:59 -08:00
Anjali Singhai
71da61976e i40e: Fix TSO with more than 8 frags per segment issue
The hardware has some limitations the driver needs to adhere to,
that we found in extended testing.
  1) no more than 8 descriptors per packet on the wire
  2) no header can span more than 3 descriptors

If one of these events occurs, the hardware will generate an internal
error and freeze the Tx queue.

This patch linearizes the skb to avoid these situations.

Change-ID: I37dab7d3966e14895a9663ec4d0aaa8eb0d9e115
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26 04:53:58 -08:00
Akeem G Abodunrin
b67a03357c i40e: Don't check for Tx hang when PF down
This patch adds check to bail out if device is already down when checking
for Tx hang subtask.

Change-ID: I3853fb7a6d11cb9a4c349b687cb25c15b19977a0
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26 04:53:57 -08:00
Shannon Nelson
de78fc5ac1 i40e: fix shift precedence issue
Add parens to make sure the shift and bitwise precedences don't work backwards
for us.

Change-ID: I60c10ef4fad6bc654522b9d8a53da2e270a0f268
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26 04:53:57 -08:00
Alexey Khoroshilov
dda094a312 i40e: Fix memory leak at failure path in i40e_dbg_command_write()
The patch fixes a leak of 'cmd_buf' when copy_from_user() failed
in i40e_dbg_command_write().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26 04:53:56 -08:00
Mauro Carvalho Chehab
a3dfc6d925 [media] dvb-usb: create one media_dev per adapter
Instead of assuming just one adapter, change the code to store
one media controller per adapter.

This works fine for dvb-usb, as, on all drivers here, it is not
possible to write a media graph that would mix resources between
the two different adapters.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 09:52:26 -03:00
Rafael Lourenço de Lima Chehab
496ccf92b9 [media] dvb-usb: add support for the media controller at USB driver
Create a struct media_device and add it to the dvb adapter.

Please notice that the tuner is not mapped yet by the dvb core.

[mchehab@osg.samsung.com: use config option MEDIA_CONTROLLER_DVB]
Signed-off-by: Rafael Lourenço de Lima Chehab <chehabrafael@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 09:52:26 -03:00
Mauro Carvalho Chehab
823b460ee7 [media] dvb-usb-v2: create one media_dev per adapter
Instead of assuming just one adapter, change the code to store
one media controller per adapter.

This works fine for dvb-usb, as, on all drivers here, it is not
possible to write a media graph that would mix resources between
the two different adapters.

Acked-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 09:52:25 -03:00
Rafael Lourenço de Lima Chehab
6f6c77d8d2 [media] dvb-usb-v2: add support for the media controller at USB driver
Create a struct media_device and add it to the dvb adapter.

Please notice that the tuner is not mapped yet by the dvb core.

[mchehab@osg.samsung.com: use config option MEDIA_CONTROLLER_DVB due to a rebase]
Signed-off-by: Rafael Lourenço de Lima Chehab <chehabrafael@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 09:49:07 -03:00
Mauro Carvalho Chehab
4b208f8b56 [media] siano: register media controller earlier
We need to initialize the media controller earlier, as the core
will call the smsdvb hotplug during register time. Ok, this is
an async operation, so, when the module is not loaded, the media
controller works.

However, if the module is already loaded, nothing will be
registered at the media controller, as it will load too late.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 09:10:39 -03:00
Mauro Carvalho Chehab
fb372a434d [media] siano: print a message if DVB register succeeds
Right now, this is a debug message, misplaced. Promote it
to an info message, as it helps to discover if something
bad happened during device init.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 09:10:05 -03:00
Mauro Carvalho Chehab
d9f3836b7b [media] siano: get rid of sms_dbg parameter
All siano modules have a sms_dbg parameter. Now that we're using
the standard pr_debug() macro, we can get rid of it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 09:10:05 -03:00
Mauro Carvalho Chehab
0dd5f20cb3 [media] siano: get rid of sms_info()
On most cases, sms_info() should actually be pr_debug(), but,
on other places, it should be pr_info().

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 09:10:04 -03:00
Mauro Carvalho Chehab
6908368879 [media] siano: replace sms_debug() by pr_debug()
There's no reason to use a macro here. Just replace everything,
and let those debug messages to be activated via dynamic printk.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 09:10:04 -03:00
Mauro Carvalho Chehab
9b283e6796 [media] siano: replace sms_log() by pr_debug()
Despite its name, those functions are acutally debug
prints for the IR part of the driver. So, properly
map them using pr_debug()

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 09:10:03 -03:00
Mauro Carvalho Chehab
5ed0a2c7ec [media] siano: replace sms_err by pr_err
Originally, sms_err() would be also displaying the line where
the error occurs, but the messages are clear enough. Also,
the function is always printed. So, no need for it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 09:10:02 -03:00
Mauro Carvalho Chehab
535bd1e96e [media] siano: replace sms_warn() by pr_warn()
There's no reason for a sms' own sms_warn macro. Just replace
it by the standard pr_warn().

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 09:10:02 -03:00