Use kernel.h macro definition.
Thanks to Julia Lawall for Coccinelle scripting support.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
input_mt_init_slots() will do that for us.
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
If a device is renamed and the original name is subsequently reused
for a new device, the following warning is generated:
sysctl duplicate entry: /net/mpls/conf/veth0//input
CPU: 3 PID: 1379 Comm: ip Not tainted 4.1.0-rc4+ #20
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
0000000000000000 0000000000000000 ffffffff81566aaf 0000000000000000
ffffffff81236279 ffff88002f7d7f00 0000000000000000 ffff88000db336d8
ffff88000db33698 0000000000000005 ffff88002e046000 ffff8800168c9280
Call Trace:
[<ffffffff81566aaf>] ? dump_stack+0x40/0x50
[<ffffffff81236279>] ? __register_sysctl_table+0x289/0x5a0
[<ffffffffa051a24f>] ? mpls_dev_notify+0x1ff/0x300 [mpls_router]
[<ffffffff8108db7f>] ? notifier_call_chain+0x4f/0x70
[<ffffffff81470e72>] ? register_netdevice+0x2b2/0x480
[<ffffffffa0524748>] ? veth_newlink+0x178/0x2d3 [veth]
[<ffffffff8147f84c>] ? rtnl_newlink+0x73c/0x8e0
[<ffffffff8147f27a>] ? rtnl_newlink+0x16a/0x8e0
[<ffffffff81459ff2>] ? __kmalloc_reserve.isra.30+0x32/0x90
[<ffffffff8147ccfd>] ? rtnetlink_rcv_msg+0x8d/0x250
[<ffffffff8145b027>] ? __alloc_skb+0x47/0x1f0
[<ffffffff8149badb>] ? __netlink_lookup+0xab/0xe0
[<ffffffff8147cc70>] ? rtnetlink_rcv+0x30/0x30
[<ffffffff8149e7a0>] ? netlink_rcv_skb+0xb0/0xd0
[<ffffffff8147cc64>] ? rtnetlink_rcv+0x24/0x30
[<ffffffff8149df17>] ? netlink_unicast+0x107/0x1a0
[<ffffffff8149e4be>] ? netlink_sendmsg+0x50e/0x630
[<ffffffff8145209c>] ? sock_sendmsg+0x3c/0x50
[<ffffffff81452beb>] ? ___sys_sendmsg+0x27b/0x290
[<ffffffff811bd258>] ? mem_cgroup_try_charge+0x88/0x110
[<ffffffff811bd5b6>] ? mem_cgroup_commit_charge+0x56/0xa0
[<ffffffff811d7700>] ? do_filp_open+0x30/0xa0
[<ffffffff8145336e>] ? __sys_sendmsg+0x3e/0x80
[<ffffffff8156c3f2>] ? system_call_fastpath+0x16/0x75
Fix this by unregistering the previous sysctl table (registered for
the path containing the original device name) and re-registering the
table for the path containing the new device name.
Fixes: 37bde79979 ("mpls: Per-device enabling of packet input")
Reported-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Robert Shearman <rshearma@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several OMAP2+ hwmod changes for v4.2. One patch cleans up a nasty
interaction between the OMAP GPMC and the hwmod code when debugging is
enabled. IP block integration data has been added for the AM43xx EMIF
RAM controller. There's also a fix for the omap-aes driver when used in
QEMU. And finally, some changes to the OMAP3 hwmod code to support the
use of the security IP blocks (AES and SHA) on GP devices, or when they've
specifically been enabled in the DT data.
Basic build, boot, and power management test results are here:
http://www.pwsan.com/omap/testlogs/omap-hwmod-a-for-v4.2/20150601192349/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=in/l
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.2/soc-pt1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
Omap hwmod changes for v4.2 via Paul Walmsley <paul@pwsan.com>:
Several OMAP2+ hwmod changes for v4.2. One patch cleans up a nasty
interaction between the OMAP GPMC and the hwmod code when debugging is
enabled. IP block integration data has been added for the AM43xx EMIF
RAM controller. There's also a fix for the omap-aes driver when used in
QEMU. And finally, some changes to the OMAP3 hwmod code to support the
use of the security IP blocks (AES and SHA) on GP devices, or when they've
specifically been enabled in the DT data.
Basic build, boot, and power management test results are here:
http://www.pwsan.com/omap/testlogs/omap-hwmod-a-for-v4.2/20150601192349/
* tag 'omap-for-v4.2/soc-pt1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP3: Fix crypto support for HS devices
ARM: OMAP2+: Return correct error values from device and hwmod
ARM: OMAP: AM43xx hwmod: Add data for am43xx emif hwmod
memory: omap-gpmc: Add Kconfig option for debug
- Enable dm9000 as built-in for NFSroot
- Enable dm816x USB phy as a loadable module
- Enable Pixcir touch screen as a loadable module
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=QPe9
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.2/o2_dc' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig
Few omap2plus_defconfig changes for v4.2 merge window:
- Enable dm9000 as built-in for NFSroot
- Enable dm816x USB phy as a loadable module
- Enable Pixcir touch screen as a loadable module
* tag 'omap-for-v4.2/o2_dc' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Enable TOUCHSCREEN_PIXCIR
ARM: omap2plus_defconfig: Add dm816x USB PHY as a loadable module
ARM: omap2plus_defconifg: Enable DM9000 in omap2plus_defconfig
Eric Dumazet says:
====================
tcp: defer shinfo->gso_size|type settings
We put shinfo->gso_segs in TCP_SKB_CB(skb) a while back for performance
reasons.
This was in commit cd7d8498c9 ("tcp: change tcp_skb_pcount() location")
This patch series complete the job for gso_size and gso_type, so that
we do not bring 2 extra cache lines in tcp write xmit fast path,
and making tcp_init_tso_segs() simpler and faster.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We had various issues in the past when TCP stack was modifying
gso_size/gso_segs while clones were in flight.
Commit c52e2421f7 ("tcp: must unclone packets before mangling them")
fixed these bugs and added a WARN_ON_ONCE(skb_cloned(skb)); in
tcp_set_skb_tso_segs()
These bugs are now fixed, and because TCP stack now only sets
shinfo->gso_size|segs on the clone itself, the check can be removed.
As a result of this change, compiler inlines tcp_set_skb_tso_segs() in
tcp_init_tso_segs()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit cd7d8498c9 ("tcp: change tcp_skb_pcount() location") we stored
gso_segs in a temporary cache hot location.
This patch does the same for gso_size.
This allows to save 2 cache line misses in tcp xmit path for
the last packet that is considered but not sent because of
various conditions (cwnd, tso defer, receiver window, TSQ...)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_set_skb_tso_segs() & tcp_init_tso_segs() no longer
use the sock pointer.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Our goal is to touch skb_shinfo(skb) only when absolutely needed,
to avoid two cache line misses in TCP output path for last skb
that is considered but not sent because of various conditions
(cwnd, tso defer, receiver window, TSQ...)
A packet is GSO only when skb_shinfo(skb)->gso_size is not zero.
We can set skb_shinfo(skb)->gso_type to sk->sk_gso_type even for
non GSO packets.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_gso_segment() and tcp_gro_receive() are not strictly
part of TCP stack. They should not assume tcp_skb_mss(skb)
is in fact skb_shinfo(skb)->gso_size.
This will allow us to change tcp_skb_mss() in following patches.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix a BUG_ON() where CONFIG_NET_SWITCHDEV is set but the driver for a
bridged port does not support switchdev_port_attr_set op. Don't BUG_ON()
if -EOPNOTSUPP is returned.
Also change BUG_ON() to netdev_err since this is a normal error path and
does not warrant the use of BUG_ON(), which is reserved for unrecoverable
errs.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Reported-by: Brenden Blanco <bblanco@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* zte/soc:
ARM: zx: Add basic defconfig support for ZX296702
ARM: dts: zx: add an initial zx296702 dts and doc
clk: zx: add clock support to zx296702
dt-bindings: Add #defines for ZTE ZX296702 clocks
Add basic defconfig support to zx SOC, including uart, mmc
and other common config
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Add initial dts file and document for ZX296702 and board ZX296702-AD1.
More peripherals will be added later.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
It adds a clock driver for zx296702 SoC to register the clock tree to
Common Clock Framework. All the clocks of bus topology and some the
peripheral clocks are ready with this commit. Some missing leaf clocks
for peripherals will be added later when needed.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Add clocks defines for the global clock controller
found on ZTE ZX296702 SoCs.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
When programming the start of a periodic output, the code wrongly places
the seconds value into the "low" register and the nanoseconds into the
"high" register. Even though this is backwards, it slipped through my
testing, because the re-arming code in the interrupt service routine is
correct, and the signal does appear starting with the second edge.
This patch fixes the issue by programming the registers correctly.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Vecera says:
====================
bna: clean-up
The patches clean the bna driver.
v2: changes & comments requested by Joe
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
...and remove some of them. It is not necessary to log when .probe() and
.remove() are called or when TxQ is started or stopped. Also log level
of some of them was changed to more appropriate one (link up/down,
firmware loading failure.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Timeout functions are defined with 'void *' ptr argument. They should
be defined directly with 'struct bfa_ioc *' type to avoid type conversions.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove macros for manipulation with struct list_head and replace them
with standard ones.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pointer cmpl used to iterate through completion entries is updated at
the beginning of while loop as well as at the end. The update at the end
of the loop is useless.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patch converts kzalloc->copy_from_user sequence to memdup_user. There
is also one useless assignment of NULL to bnad->regdata as it is followed
by assignment of kzalloc output.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TX_E_PRIO_CHANGE event is never sent for bna_tx so it doesn't need to be
handled. After this change bna_tx->flags cannot contain
BNA_TX_F_PRIO_CHANGED flag and it can be also eliminated.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The bna_rx_config struct member paused can be removed as it is never
written and as it cannot have non-zero value the bna_rxf struct member
flags also cannot have BNA_RXF_F_PAUSED value and is always zero.
So the flags member can be removed as well as bna_rxf_flags enum and
the code-paths that needs to have non-zero bna_rxf->flags.
This clean-up makes bna_rxf_sm_paused state unsed and can be also removed.
Signed-off-by: David S. Miller <davem@davemloft.net>
RXF_E_PAUSE & RXF_E_RESUME events are never sent for bna_rxf object so
they needn't to be handled. The bna_rxf's state bna_rxf_sm_fltr_clr_wait
and function bna_rxf_fltr_clear are unused after this so remove them also.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
removed:
bna_rx_ucast_add
bna_rx_ucast_del
simplified:
bna_enet_pause_config
bna_rx_mcast_delall
bna_rx_mcast_listset
bna_rx_mode_set
bna_rx_ucast_listset
bna_rx_ucast_set
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The patch converts mac_t type to widely used 'u8 [ETH_ALEN]'.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parameters of all ether_addr_copy instances were checked for proper
alignment. Alignment of bnad_bcast_addr is forced to 2 as the implicit
alignment is 1.
I have also renamed address parameter of bnad_set_mac_address() to addr.
The name mac_addr was a little bit confusing as the real parameter is
struct sockaddr *.
v2: added __aligned directive to bnad_bcast_addr, renamed parameter of
bnad_set_mac_address() (thx joe@perches.com)
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Or Gerlitz says:
====================
mlx5 Ethernet driver update - Jun 11 2015
This series from Saeed, Achiad and Gal contains few fixes
to the recently introduced mlx5 Ethernet functionality.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Allocate and use transport domain by the Ethernet driver code.
Signed-off-by: Achiad Shochat <achiad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Each transport object, namely TIR and TIS, must have a transport domain
number (TDN) identifier.
The driver wrongly assumed that it is OK to use TDN=0 without explicit
TDN allocation from the device.
The TDN will also be used for isolating different processes once user
mode Ethernet will be supported.
Signed-off-by: Achiad Shochat <achiad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When NETIF_F_SG is set, each send WQE may have a different size since
each skb can have different number of fragments as of LSO header etc.
This implies that a given WQE may wrap around the send queue, i.e begin
at its end and continue at its start. While it is legal by the device spec,
we preferred a solution that avoids it - when building of current WQE is
done, if the next WQE may wrap around the send queue, fill the send queue
with NOPs WQEs till its end, so that the next WQE will begin at send queue
start.
NOP WQE for itself cannot wrap around the send queue since it is of
minimal size - 64 bytes, and all send WQEs are a multiple of that size.
Signed-off-by: Achiad Shochat <achiad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Ethernet driver requires at least 3 flow table levels to
operate, enforce that.
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to resolve a HW configuration issue for enabling HW CVLAN
insertion. Meanwhile, no need to implement the VLAN insertion in
the driver, rather use the generic kernel VLAN insertion method.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Enable HW cacheline start padding and align RX WQE size to cacheline
while considering HW start padding. Also, fix dma_unmap call to use
the correct SKB data buffer size.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously we configured HW MTU to be netdev->mtu, actually we
need to configure netdev->mtu + (ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN).
Also, query MTU can not fail, hence make the relevant helper a
void functionm, add mlx5e_set_dev_port_mtu, helper function to
handle MTU setting.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We return success if mlx5e_alloc_sq_db() fails but we should return an
error code.
Fixes: f62b8bb8f2 ('net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 02b4e2756e (ARM: v7 setup function should invalidate L1
cache) the soc specific secondary_startup is removed, causing build
failures:
../arch/arm/mach-socfpga/platsmp.c: In function 'socfpga_a10_boot_secondary':
../arch/arm/mach-socfpga/platsmp.c:66:140: error: 'socfpga_secondary_startup' undeclared (first use in this function)
../arch/arm/mach-socfpga/platsmp.c:66:140: note: each undeclared identifier is reported only once for each function it appears in
To fix, use the generic secondary_startup.
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
