Various boot loaders for Exynos based boards use certain memory
addresses during booting for different purposes. Mostly this is one of
following :
1. as a CPU boot address,
2. for storing magic cookie related to low power mode (AFTR, sleep).
The document, based solely on kernel source code, tries to group the
information scattered over different files. This would help in the
future when adding support for new SoC or when extending features
related to low power modes.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
In order to prevent any NFC feature when NFC is disable and
to save power, (down to 4uA) put the CLF in hibernate mode
with RF deactivated.
Add the equivalent to enable the NFC feature when initiating
the st21nfcb driver.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
When st21nfcb is disabled, the irq line may remain active
while no data are available, flooding the system with
irrelevant i2c transaction.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The powered flag can be set from the ndlc_open and ndlc_close layer.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Removing st21nfcb may need to execute some specific commands before
stopping the ndlc state machine.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
When closing the device some data (proprietary commands)
might be sent. The core state machine needs to be set for
correct command execution.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
On st21nfcb, nci proprietary commands are available to run
specific chip operations (for example: power management)
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
When closing st21nfcb driver, flag ST21NFCB_NCI_RUNNING can be cleared
only once the ndlc and the transport (i2c or spi) layers are released.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
In order to release the st21nfcb properly close the ndlc
layer first.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
ndlc_remove already calls st21nfcb_nci_i2c_disable and
phy->powered is already set to 0.
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Once the data is sent, we need to preserve the full frame for
the ndlc state machine. If the NDLC ACK is not received in time,
the ndlc layer will resend the same frame.
Having the header byte pulled will corrupt the frame.
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Since ndev->driver_data is allocated by devm_kzalloc(), we do not
need the inappropriate kfree to free it in driver's remove function.
Freeing will trigger when driver unloads.
Cc: stable@vger.kernel.org
Acked-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Firo Yang <firogm@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Handle allowing to send proprietary nci commands anywhere in the nci
state machine.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Some device may need to execute some proprietary commands
in order to "wake-up"; Before the nci state initialization.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
setup was executed in any case, even if NCI_RESET failed.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Allow for drivers to explicitly define handlers for each
proprietary notifications and responses they expect to support.
Reviewed-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Several of these goto exit; uses should be direct returns
as skb is not yet initialized by nci_hci_get_param().
Miscellanea:
o Use !memcmp instead of memcmp() == 0
o Remove unnecessary goto from if () {... goto exit;} else {...} exit:
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Since 39b2bbe3d7 (gpio: add flags argument to gpiod_get*()
functions) which appeared in v3.17-rc1, the gpiod_get* functions
take an additional parameter that allows to specify direction and
initial value for output.
Use this to simplify the driver. Furthermore this is one caller less
that stops us making the flags argument to gpiod_get*() mandatory.
While touching this also do some minor coding style fixes.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
In microread_i2c_irq_thread_fn 'client' set but not used
Cc: Lauro Ramos Venancio <lauro.venancio@openbossa.org>
Cc: Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
CONFIG_DYNAMIC_DEBUG is the right toggle to enable pr_debug().
Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Brian Gerst noticed that I did a weird rename in the following commit:
b2502b418e ("x86/asm/entry: Untangle 'system_call' into two entry points: entry_SYSCALL_64 and entry_INT80_32")
which renamed __NR_ia32_syscall_max to __NR_entry_INT80_compat_max.
Now the original name was a misnomer, but the new one is a misnomer as well,
as all the 32-bit compat syscall entry points (sysenter, syscall) share the
system call table, not just the INT80 based one.
Rename it to __NR_syscall_compat_max.
Reported-by: Brian Gerst <brgerst@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
I broke this recently when I changed pt_regs->r8..r11 clearing
logic in INT 80 code path.
There is a branch from SYSENTER/SYSCALL code to INT 80 code:
if we fail to retrieve arg6, we return EFAULT. Before this
patch, in this case we don't clear pt_regs->r8..r11.
This patch fixes this. The resulting code is smaller and
simpler.
While at it, remove incorrect comment about syscall dispatching
CALL insn: it does not use RIP-relative addressing form (the
comment was meant to be "TODO: make this rip-relative", and
morphed since then, dropping "TODO").
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1433701470-28800-1-git-send-email-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Instead of manually handling the frees use devm. There was also a free
missing in the unregister call which is not needed with devm.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch makes bcma_hcd_create_pdev() not return NULL, but a prober
error code in case of an error.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
isp1760_ep_alloc_request allocates a structure with kzalloc without checking
for NULL and then returns a pointer to one of the structure fields. As the
field happens to be the first in the structure the caller can properly check
for NULL, but this is risky if the structure layout is changed later. Add an
explicit NULL check for the kzalloc return value
Detected with smatch static analysis:
drivers/usb/isp1760/isp1760-udc.c:816 isp1760_ep_alloc_request()
error: potential null dereference 'req'. (kzalloc returns null)
[ thanks to Laurent Pinchart for improved commit message ]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds support for the LIS331DL sensor version. This is
a simple 8bit-only accelerometer.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The current versions of the trf7970a has an erratum where it returns
an extra byte in the response to 'Read Multiple Block' (RMB) commands.
This command is issued to Type 5 tags (i.e., ISO/IEC 15693 tags) by
the neard daemon.
To handle this, define a new Device Tree property,
't5t-rmb-extra-byte-quirk', which indicates that the associated
trf7970a device has this erratum. The trf7970a device driver
will then ensure that the response length to RMB commands is
reduced by one byte (for devices with the erratum).
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
When GPIO is not enabled we hit this kind of warning:
drivers/nfc/nxp-nci/i2c.c: In function 'nxp_nci_i2c_acpi_config':
drivers/nfc/nxp-nci/i2c.c:320:2: error: implicit declaration of function 'devm_gpiod_get_index' [-Werror=implicit-function-declaration]
gpiod_en = devm_gpiod_get_index(&client->dev, NULL, 2);
This is fixed by explicitely including gpio/consumer.h.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
ATOL FPrint fiscal printers require usb_clear_halt to be executed
to work properly. Add quirk to fix the issue.
Signed-off-by: Alexey Sokolov <sokolov@7pikes.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit 2e1cdfe184 ("coresight-etm4x:
Adding CoreSight ETM4x driver") this driver was added.
It uses module_amba_driver() to register itself with the system,
which is just an alias for module_driver. This currently works by
relying on getting that via init.h but we are planning to move that
code[1] to module.h -- at which time this will fail to compile since
it does not include module.h currently, resulting in:
drivers/hwtracing/coresight/coresight-etm4x.c:2701:1: note: in expansion of macro ‘module_amba_driver’
module_amba_driver(etm4x_driver);
^
include/linux/device.h:1296:1: error: type defaults to ‘int’ in declaration of ‘module_init’ [-Werror=implicit-int]
module_init(__driver##_init); \
^
In the future, the amba support may want to create another alias that
uses builtin_driver[2] for cases like this which are using bool Kconfig
triggers, but for now we just fix the implicit include.
[1] https://lkml.kernel.org/r/1433276168-21550-1-git-send-email-paul.gortmaker@windriver.com
[2] https://lkml.kernel.org/r/1431287385-1526-1-git-send-email-paul.gortmaker@windriver.com
Cc: Pratik Patel <pratikp@codeaurora.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit 620cf787c1 ("coresight: replicator:
Add Qualcomm CoreSight Replicator driver") this driver was added.
It uses module_amba_driver(replicator_driver) to register itself with
the system -- which is just an alias for module_driver. This currently
works by relying on getting that via init.h but we are planning to move
that code[1] to module.h -- at which time this will fail to compile since
it does not include module.h currently, resulting in:
drivers/hwtracing/coresight/coresight-replicator-qcom.c:214:1: error: type defaults to 'int' in declaration of 'module_init' [-Werror=implicit-int]
drivers/hwtracing/coresight/coresight-replicator-qcom.c:214:1: error: type defaults to 'int' in declaration of 'module_exit' [-Werror=implicit-int]
In the future, the amba support may want to create another alias that
uses builtin_driver[2] for cases like this which are using bool Kconfig
triggers, but for now we just fix the implicit include.
[1] https://lkml.kernel.org/r/1433276168-21550-1-git-send-email-paul.gortmaker@windriver.com
[2] https://lkml.kernel.org/r/1431287385-1526-1-git-send-email-paul.gortmaker@windriver.com
Cc: Pratik Patel <pratikp@codeaurora.org>
Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert spaces at the start of a line to a tab.
Signed-off-by: Markus Böhme <markus.boehme@mailbox.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The indenting here causes a static checker warning:
drivers/staging/rtl8192e/rtllib_rx.c:626 RxReorderIndicatePacket()
warn: curly braces intended?
The code is actually correct, it's just that these lines were pushed in
an extra indent level by mistake in 35e33b0468 ('staging: rtl8192e:
Fix LONG_LINE warnings').
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mp_adapter structure was used in past, but now is only initialized and
never read.
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unused members of rtl8192_priv structure.
Some of them are never used, other are just initialized and
never accessed.
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Remove unused fields in dig_t structures. Some of them were only
initialized and never accessed.
- Remove unused enums/macros/defines in rtl_dm.h
- Remove duplicated function declarations
- Remove unused dm_change_dynamic_initgain_thresh() function
- Remove unused dm_shadow_init() function
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Both functions are never used.
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove cmpk_message_handle_rx() and static functions used by it.
This function was never called.
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove cmpk_handle_query_config_rx function. It is called
once, does some calculation, but generates no output -
it has neither return value, nor modify its parameters.
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove two lines at ieee80211_wep_null which checkpatch.pl reported as errors.
The first one because it has a C99 comment style and the second one because it is a void
return which is useless.
The function ieee80211_wep_null cannot be completely removed because it is exported and
used to autoload the module.
Signed-off-by: Pedro Marzo Perez <marzo.pedro@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simplify prism2_wep_init error check code employing goto when a failure is detected.
Removed pr_debug which was given a checkpatch.pl error because of literal string
splitted across two lines of code, it was seldom going to be printed anyway.
Signed-off-by: Pedro Marzo Perez <marzo.pedro@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the following sparse warnings:
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c:663:32: warning: incorrect type in assignment (different base types)
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c:663:32: expected restricted __le16 [usertype] frame_ctl
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c:663:32: got int
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c:664:50: warning: invalid assignment: |=
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c:664:50: left side has type restricted __le16
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c:664:50: right side has type int
Signed-off-by: Gaston Gonzalez <gascoar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
auth_parse() return result is in incorrect le16 byte order. Currently
this still works since the user code merely checks if error code is
equal to 0. However debug statement in ieee80211_check_auth_response()
prints the error code in the incorrect le16 byte order. This fix
corrects the byte order as cpu order.
Signed-off-by: Tolga Ceylan <tolga.ceylan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The underflow in OZ_DATA_F_ISOC_FIXED seems not harmful, but this patch
is a clean up and makes my static checker a bit happier.
The underflow in OZ_VENDOR_CLASS_RSP seems like it could result in
memory corruption.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
