These have now all been replaced by enum/try/s/g_mbus_fmt.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This commit replaces the ttm_bo_cleanup_ref function with two new functions.
One for the case where the bo is not yet on the delayed destroy list, and
one for the case where the bo was on the delayed destroy list, at least at
the time of call. This makes it possible to optimize the two cases somewhat.
It also enables the possibility to directly destroy buffers on the
delayed delete list when they are about to be evicted or swapped out.
Currently they were only evicted / swapped and destruction was left for the
delayed buffer destruction thread.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The external GPIO interrupts of the ColdFire 5272 SoC are edge triggered,
unlike the internal interrupt sources (which are level triggered).
Add proper support for these interrupts.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
The vector field of the processors exception frame actually contains
both the vector exception number and fault status field bits.
The exception processing code was not correctly masking out the
fault status field bits before switching on the vector number.
The default case was catching the bad check, but we are reporting
the wrong kind of exception in some cases.
Reported-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Replace EXTRA_CFLAGS with ccflags-y and EXTRA_AFLAGS with asflags-y.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Serial lines on the MCF548x have really big fifos : 512 bytes.
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Add a very basic mmu-less support for coldfire m548x family. This is perhaps
also valid for m547x family. The port comprises the serial, tick timer and
reboot support. The gpio part compiles but is empty. This gives a functional
albeit limited linux for the m548x coldfire family. This has been tested
on a Freescale M548xEVB Lite board with a M5484 processor and the default
dbug monitor.
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
The use of __do_IRQ is deprecated, so lets stop using it.
Generally the interrupts on the supported processors here are
level triggered, so this is strait forward to switch over to
using the standard handle_level_irq flow handler. (Although
some ColdFire parts support edge triggered GPIO line interrupts
we have no support for them yet).
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
In m68k/m68knommu assembly files, the same value is called sometimes
PT_OFF_VECTOR, but more frequently PT_OFF_FORMATVEC. Standardize
name to PT_OFF_FORMATVEC.
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
The Coldfire MCF547x/MCF548x have the same interrupt controller as
the MCF528x e.g., but only one, not two as in the MCF528x. Modify
intc-2.c to support only one interrupt controller if MCFICM_INTC1 is
not defined.
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
m68k{nommu}/asm-offsets.c define many constants which are not used
anymore anywhere; remove IRQ_DEVID, IRQ_HANDLER, IRQ_NEXT, STAT_IRQ,
TASK_ACTIVE_MM, TASK_BLOCKED, TASK_FLAGS, TASK_PTRACE, TASK_STATE,
TASK_THREAD_INFO, TI_CPU, TI_EXECDOMAIN and TI_TASK.
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
The chips lists were in commit logs, but should also be in source files.
This way it is easier to choose the right source file for a not yet
supported Coldfire.
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
strace enabled is marked using the `flags' field of the `thread_info' struct.
68360 version of entry.S did test a wrong bit in a wrong structure
(task_struct).
68328 version of entry.S did test the right bit in the right structure,
but wrongly, because the `flags' field is 32 bit wide, while the used
assembler insn (btst) only accesses a 8 bit byte in memory.
Fix both using code already used in the coldfire version of entry.S
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Currently m68knommu boards without RTC chip start with an unexpected
default date of 1999-11-30 (Actually the source asks for 2000-00-00)
Make that 1970-01-01 instead, as expected.
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
CONFIG_68328_SERIAL_UART2 doesn't exist in Kconfig, therefore removing
all references to it from the source.
Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
CONFIG_RAM_{16,32}_MB doesn't exist in Kconfig, therefore removing
all references to it from the source.
Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
CONFIG_M68KFPU_EMU doesn't exist in Kconfig, therefore removing
all references to it from the source. This Flags seems to exist only
on m68k with mmu, and this dead blocks are copy paste.
Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
CONFIG_RELOCATE doesn't exist in Kconfig, therefore removing
all references to it from the source.
Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
CONFIG_M68000 doesn't exist in Kconfig, therefore removing
all references to it from the source.
Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
It has its uses in a domU as well as dom0. Xen will prevent an
unprivileged domain from doing anything untoward.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
This allows xenfs to be built as a module, previously it required flush_tlb_all
and arbitrary_virt_to_machine to be exported.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
On error IOCTL_PRIVCMD_MMAPBATCH is expected to set the top nibble of
the effected MFN and return 0. Currently it leaves the MFN unmodified
and returns the number of failures. Therefore:
- reimplement remap_domain_mfn_range() using direct
HYPERVISOR_mmu_update() calls and small batches. The xen_set_domain_pte()
interface does not report errors and since some failures are
expected/normal using the multicall infrastructure is too noisy.
- return 0 as expected
- writeback the updated MFN list to mmapbatch->arr not over mmapbatch,
smashing the caller's stack.
- remap_domain_mfn_range can be static.
With this change I am able to start an HVM domain.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
xen_store_interface is needed by xenfs, and xenfs may be a module.
[ Impact: build fix for modular xenfs ]
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Test vma->vm_ops is our operations to make sure we created it.
We don't want to stomp on other random vmas.
[ Impact: bugfix; prevent ioctl from affecting other mappings ]
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
I don't think it matters at all in this case (there's only one caller
which checks the return value), but may as well be strictly correct.
[ Impact: cleanup ]
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
These are necessary to allow writeable mmap of the privcmd node to
succeed without being marked read-only for writenotify purposes. Which
in turn is necessary to allow mappings of foreign guest pages
[ Impact: bugfix: allow writable mappings ]
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
The privcmd interface in xenfs allows the tool stack in the privileged
domain to get fairly direct access to the hypervisor in order to do
various management things such as domain construction.
[ Impact: new xenfs interface for privileged operations ]
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Allow non-constant hypercall to be called, for privcmd.
[ Impact: make arbitrary hypercalls; needed for privcmd ]
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Add xen_set_domain_pte() to allow setting a pte mapping a page from
another domain. The common case is to map from DOMID_IO, the pseudo
domain which owns all IO pages, but will also be used in the privcmd
interface to map other domain pages.
[ Impact: new Xen-internal API for cross-domain mappings ]
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
These are used by the userspace xenstore daemon, which runs in dom0.
Xenstored is what's behind the xenfs "xenbus" filesystem.
[ Impact: provide mapping and port to usermode for xenstore ]
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
When CONFIG_NF_CONNTRACK_SECMARK is not set we accidentally attempt to use
the secmark fielf of struct nf_conn. Problem is when that config isn't set
the field doesn't exist. whoops. Wrap the incorrect usage in the config.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>