Commit graph

223,061 commits

Author SHA1 Message Date
Gregory Bean
1963a2afc8 msm: add gpiomux api for gpio multiplex & configuration.
Add the 'gpiomux' api, which addresses the following shortcomings
of existing tlmm api:

- gpio power-collapse, which is managed by a peripheral processor on
  other targets, must be managed by the application processor on the 8x60.
- The enable/disable flag of the legacy gpio_tlmm_config api
  is not applicable on the 8x60, and causes confusion.
- The gpio 'direction' bits are meaningless for all func_sel
  configurations except for generic-gpio mode (func_sel 0), in which
  case the gpio_direction_* functions should be used.  Having these
  bits in the tlmm api leads to confusion and misuse of the gpiolib
  api, and they have been removed in gpiomux.
- The functional api of the legacy system ran contrary to the typical
  use-case, which is a single massive configuration at boot.  Rather
  than forcing hundreds of 'config' function calls, the new api
  allows data to be configured with a single table.

gpiomux_get and gpiomux_put are meant to be called automatically
when gpio_request and gpio_free are called, giving automatic
gpiomux/tlmm control to those drivers/lines with simple
power profiles - in the simplest cases, an entry in the gpiomux table
and the correct usage of gpiolib is all that is required to get proper
gpio power control.

Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-06 09:01:15 -07:00
Abhijeet Dharmapurikar
846afbd1fe GIC: Dont disable INT in ack callback
Masking in the ack callback fails to work with handle_percpu_irq and handle_edge_irq.
The interrupt stays disabled after the first invocation since percpu and edge irq do
not unmask an interrupt after handling it. For handle_level_irq masking in the ack
is redundant because ack is always called after mask in the mask_ack function.

Masking in the ack function is required only when __do_IRQ was used instead of flow
handlers, but using __do_IRQ has been deprecated.

Remove the masking of interrupt from the ack callback.

Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Jeff Ohlstein <johlstei@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-06 08:39:53 -07:00
Takashi Iwai
dd1d3a49db ALSA: oxygen - Add a SSID for CMI8787-HG2PCI
This board has a strange PCI SSID 13f6:ffff.  Works as compabile as
MODEL_CMEDIA_REF.

Reported-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-06 17:28:56 +02:00
Pavan Savoy
2bb32e84a1 misc: ti-st: Kconfig & Makefile for TI_ST
Add the Kconfig and the Makefile for the TI_ST driver.
TI_ST driver is the line discipline driver for the Texas Instrument's
WiLink chipsets.
Also add the ti-st folder to list of drivers under drivers/misc.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-06 08:27:00 -07:00
Pavan Savoy
a0cc2f3b51 staging: ti-st: move TI_ST from staging to misc/
move the 3 source files st_core.c, st_kim.c and st_ll.c
from staging to drivers/misc/.

Texas Instrument's WiLink 7 chipset packs wireless technologies like
Bluetooth, FM, GPS and WLAN into a single die.
Among these the Bluetooth, FM Rx/Tx and GPS are interfaced to a apps processor
over a single UART.

This line discipline driver allows various protocol drivers such as Bluetooth
BlueZ driver, FM V4L2 driver and GPS simple character device driver
to communicate with its relevant core in the chip.

Each protocol or technologies use a logical channel to communicate with chip.
Bluetooth uses the HCI-H4 [channels 1-4], FM uses a CH-8 and
GPS a CH-9 protocol. The driver also constitutes the TI HCI-LL Power
Management protocol which use channels 30-33.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-06 08:25:06 -07:00
Michael Hennerich
aecac19179 staging: iio: adc: ad799x: Address iio list feedback
Address feedback from Shubhrajyoti Datta:
	Cast return value
Michael Hennerich:
	Use i2c_smbus_read_byte_data()
	Fix return value check

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-06 08:22:44 -07:00
Michael Hennerich
e1517c00da staging: iio: adc: max1363: prevent buffer overflow
ring->access.read_last() reads the entire datum from
the ring including padding and time stamp.

Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-06 08:21:28 -07:00
Michael Hennerich
858f1ccff1 staging: iio: adc: ad799x: prevent buffer overflow
ring->access.read_last() reads the entire datum from the ring including padding and time stamp.

Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-06 08:21:28 -07:00
Jason Cooper
5a505da957 staging: brcm80211: fix checkpatch macro errors.
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-06 08:20:42 -07:00
Jason Cooper
e9887c9d9c staging: brcm80211: fix various checkpatch spacing errors.
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-06 08:20:42 -07:00
Jason Cooper
5f782dee8d staging: brcm80211: fix 'do not init statics to 0 or NULL'
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-06 08:20:42 -07:00
Jason Cooper
6998d33795 staging: brcm80211: fix 'do not init globals to 0 or NULL'
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-06 08:20:42 -07:00
Jason Cooper
81e95f9d4e staging: brcm80211: brcmfmac/*: fix remaining 'assignment in if condition'
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-06 08:20:41 -07:00
Greg Kroah-Hartman
671a6e3cc9 Staging: the tree is now kept in git, not quilt
Update the MAINTAINERS file to show the new location of the staging
development tree.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-06 08:18:01 -07:00
Wey-Yi Guy
58a39090a1 iwlagn: define 130 series of WiFi/BT combo devices
add new structures and defines need to identify 130 devices.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-06 08:14:21 -07:00
Wey-Yi Guy
898dade116 iwlagn: rename iwl5000_tx_resp
iwl5000_tx_resp really should be iwlagn_tx_resp, rename it.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-06 08:12:02 -07:00
Wey-Yi Guy
a8029bb79e iwlwifi: remove uncorrect comments
some structure belong to _agn devices, not just 5000. Fix it.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-06 08:11:41 -07:00
Wey-Yi Guy
ab63c68ada iwlagn: rename iwl5000_tx_power_dbm_cmd
iwl5000_tx_power_dbm_cmd really should be iwlagn_tx_power_dbm_cmd,
so rename it.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-06 08:11:27 -07:00
Wey-Yi Guy
7cb1b0887f iwlagn: reduce redundant parameter definitions
move paramater definitions to a device paramater structure only
leaving the device name, which antennas are used and what firmware
file to use in the iwl_cfg structure.  this will not completely
remove the redundancies but greatly reduce them for devices that
only vary by name or antennas.  the parameters that are more
likely to change within a given device family are left in iwl_cfg.
also separate bt param structure added to help reduce more.

Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-06 08:10:00 -07:00
Wey-Yi Guy
72645eff4b iwlwifi: schedule to deprecate software scan support
Hardware scan is the prefer method for all iwlwifi devices;
especially for dual-mode functions. Schedule to deprecate the
software scan support in kernel 2.6.40

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-06 07:42:43 -07:00
Clemens Ladisch
ebebeece4b ALSA: oxygen: add PEX8111 initialization
Configure the PEX8111 bridge on the PCI Express cards so that the audio
DMA controller can do proper burst reads and is less likely to lose
data.  This is usually done automatically, but is required on older
cards where the user has not applied the PLX firmware update.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-06 16:27:18 +02:00
Clemens Ladisch
7cb4ced5aa ALSA: oxygen: rewrite PCIe bridge initialization
Change the PCIe/PCI bridge initialization code to configure only the
bridge that is actually connected to the sound chip, instead of any
bridge found in the system.  The new code also makes it easier to add
other bridges.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-06 16:27:12 +02:00
Clemens Ladisch
93943beb29 ALSA: oxygen: reduce minimum period count
The interrupt counter is independent of the buffer counter, so there are
no restrictions on the period size.  Having fewer periods also makes
PulseAudio happy.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-06 16:27:03 +02:00
Christoph Lameter
a5a84755c5 slub: Move functions to reduce #ifdefs
There is a lot of #ifdef/#endifs that can be avoided if functions would be in different
places. Move them around and reduce #ifdef.

Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2010-10-06 16:54:37 +03:00
Christoph Lameter
ab4d5ed5ee slub: Enable sysfs support for !CONFIG_SLUB_DEBUG
Currently disabling CONFIG_SLUB_DEBUG also disabled SYSFS support meaning
that the slabs cannot be tuned without DEBUG.

Make SYSFS support independent of CONFIG_SLUB_DEBUG

Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2010-10-06 16:54:36 +03:00
Pekka Enberg
15b7c51420 SLUB: Optimize slab_free() debug check
This patch optimizes slab_free() debug check to use "c->node != NUMA_NO_NODE"
instead of "c->node >= 0" because the former generates smaller code on x86-64:

  Before:

    4736:       48 39 70 08             cmp    %rsi,0x8(%rax)
    473a:       75 26                   jne    4762 <kfree+0xa2>
    473c:       44 8b 48 10             mov    0x10(%rax),%r9d
    4740:       45 85 c9                test   %r9d,%r9d
    4743:       78 1d                   js     4762 <kfree+0xa2>

  After:

    4736:       48 39 70 08             cmp    %rsi,0x8(%rax)
    473a:       75 23                   jne    475f <kfree+0x9f>
    473c:       83 78 10 ff             cmpl   $0xffffffffffffffff,0x10(%rax)
    4740:       74 1d                   je     475f <kfree+0x9f>

This patch also cleans up __slab_alloc() to use NUMA_NO_NODE instead of "-1"
for enabling debugging for a per-CPU cache.

Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2010-10-06 16:52:26 +03:00
matt mooney
5789451713 power_supply: Makefile cleanup
Replace EXTRA_CFLAGS with ccflags-y; remove if-statements and replace
with lists using the kbuild idiom.

None of the dependencies are modified.

Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-10-06 17:38:42 +04:00
Axel Lin
9292585c67 bq27x00_battery: Add missing kfree(di->bus) in bq27x00_battery_remove()
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-10-06 17:38:15 +04:00
Heikki Krogerus
fe3f6d097a power_supply: Introduce maximum current property
USB only gives the maximum current allowed to draw.

Signed-off-by: Heikki Krogerus <ext-heikki.krogerus@nokia.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-10-06 17:37:22 +04:00
Heikki Krogerus
85efc8a18c power_supply: Add types for USB chargers
This adds power supply types for USB chargers defined in
Battery Charging Specification 1.1.

Signed-off-by: Heikki Krogerus <ext-heikki.krogerus@nokia.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-10-06 17:37:09 +04:00
Ryan Mallon
353f867b55 ds2782_battery: Fix units
Correct the unit names in the ds2782 battery driver. Changes voltage_uA
to voltage_uV and capacity_uA to capacity.

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Yulia Vilensky <vilensky@compulab.co.il>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-10-06 17:36:49 +04:00
Nicolas Kaiser
532daaa110 arm/shmobile: remove duplicated include
Remove duplicated include.

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-06 20:24:21 +09:00
Guennadi Liakhovetski
46f12936fd sh: fix an ms7724se compile breakage
Fix a compile breakage, caused by my own careless copy-paste.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-06 20:24:21 +09:00
Jiri Kosina
d7eccbbae8 Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget
This is a partial revert of 7f26b3a753 ("drivers/usb: Remove unnecessary
return's from void functions") as this hunk will vanish in USB tree completely.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-06 11:34:48 +02:00
Antonio Ospite
e42dee9a99 HID: hidraw, fix a NULL pointer dereference in hidraw_write
BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
IP: [<ffffffffa0f0a625>] hidraw_write+0x3b/0x116 [hid]
[...]

This is reproducible by disconnecting the device while userspace writes
to dev node in a loop and doesn't check return values in order to exit
the loop.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Cc: stable@kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-06 11:30:34 +02:00
Antonio Ospite
d20d5ffab9 HID: hidraw, fix a NULL pointer dereference in hidraw_ioctl
BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
IP: [<ffffffffa02c66b4>] hidraw_ioctl+0xfc/0x32c [hid]
[...]

This is reproducible by disconnecting the device while userspace does
ioctl in a loop and doesn't check return values in order to exit the
loop.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Cc: stable@kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-06 11:30:31 +02:00
Steven Whitehouse
134669854e GFS2: Fix type mapping for demote_rq interface
Mostly the glock operations follow the type of the glock. The
one exception is the transaction glock, so we need to check for
that directly.

Reported-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-10-06 09:58:44 +01:00
Nobuhiro Iwamatsu
901c28c257 sh: Fix address calculation of Initrd
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-06 16:53:28 +09:00
Akinobu Mita
bde40898c8 sh: fix uninitialized spinlock
The spinlock in traps_64.c is used without initialization.
This fixes it by declaring DEFINE_SPINLOCK() and makes the spinlock static
variable.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-06 16:53:27 +09:00
Paul Mundt
6966fed9d8 sh: intc: Fix build with IRQ balancing disabled.
The balancing stubs obviously need to be static inline..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-06 16:44:10 +09:00
Paul Mundt
33fc1a211c sh: intc: Add missing files.
The Kconfig and Makefile were overlooked, add those in now to improve
odds of building.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-06 15:38:16 +09:00
Jeremy Fitzhardinge
161b0275e2 x86, mm: Add RESERVE_BRK_ARRAY() helper
This is useful when converting static arrays into boot-time brk
allocated objects.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
LKML-Reference: <4C805EEA.1080205@goop.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-10-05 22:16:54 -07:00
Yinghai Lu
16c36f743b x86, memblock: Remove __memblock_x86_find_in_range_size()
Fold it into memblock_x86_find_in_range(), and change bad_addr_size()
to check_reserve_memblock().

So whole memblock_x86_find_in_range_size() code is more readable.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4CAA4DEC.4000401@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-10-05 21:45:43 -07:00
Yinghai Lu
f1af98c762 memblock: Fix wraparound in find_region()
When trying to find huge range for crashkernel, get

[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/mm/memblock.c:248 memblock_x86_reserve_range+0x40/0x7a()
[    0.000000] Hardware name: Sun Fire x4800
[    0.000000] memblock_x86_reserve_range: wrong range [0xffffffff37000000, 0x137000000)
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.36-rc5-tip-yh-01876-g1cac214-dirty #59
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff82816f7e>] ? memblock_x86_reserve_range+0x40/0x7a
[    0.000000]  [<ffffffff81078c2d>] warn_slowpath_common+0x85/0x9e
[    0.000000]  [<ffffffff81078d38>] warn_slowpath_fmt+0x6e/0x70
[    0.000000]  [<ffffffff8281e77c>] ? memblock_find_region+0x40/0x78
[    0.000000]  [<ffffffff8281eb1f>] ? memblock_find_base+0x9a/0xb9
[    0.000000]  [<ffffffff82816f7e>] memblock_x86_reserve_range+0x40/0x7a
[    0.000000]  [<ffffffff8280452c>] setup_arch+0x99d/0xb2a
[    0.000000]  [<ffffffff810a3e02>] ? trace_hardirqs_off+0xd/0xf
[    0.000000]  [<ffffffff81cec7d8>] ? _raw_spin_unlock_irqrestore+0x3d/0x4c
[    0.000000]  [<ffffffff827ffcec>] start_kernel+0xde/0x3f1
[    0.000000]  [<ffffffff827ff2d4>] x86_64_start_reservations+0xa0/0xa4
[    0.000000]  [<ffffffff827ff3de>] x86_64_start_kernel+0x106/0x10d
[    0.000000] ---[ end trace a7919e7f17c0a725 ]---
[    0.000000] Reserving 8192MB of memory at 17592186041200MB for crashkernel (System RAM: 526336MB)

This is caused by a wraparound in the test due to size > end;
explicitly check for this condition and fail.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4CAA4DD3.1080401@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-10-05 21:45:35 -07:00
Yinghai Lu
1d931264af x86-32, memblock: Make add_highpages honor early reserved ranges
Originally the only early reserved range that is overlapped with high
pages is "KVA RAM", but we already do remove that from the active ranges.

However, It turns out Xen could have that kind of overlapping to support memory
ballooning.x

So we need to make add_highpage_with_active_regions() to subtract
memblock reserved just like low ram; this is the proper design anyway.

In this patch, refactering get_freel_all_memory_range() to make it can
be used by add_highpage_with_active_regions().  Also we don't need to
remove "KVA RAM" from active ranges.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4CABB183.1040607@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-10-05 21:44:35 -07:00
Yinghai Lu
9f4c13964b x86, memblock: Fix crashkernel allocation
Cai Qian found crashkernel is broken with the x86 memblock changes.

1. crashkernel=128M@32M always reported that range is used, even if
   the first kernel is small and does not usethat range

2. we always got following report when using "kexec -p"
	Could not find a free area of memory of a000 bytes...
	locate_hole failed

The root cause is that generic memblock_find_in_range() will try to
allocate from the top of the range, whereas the kexec code was written
assuming that allocation was always near the bottom and that it could
blindly extend memory upward.  Unfortunately the kexec code doesn't
have a system for requesting the range that it really needs, so this
is subject to probabilistic failures.

This patch hacks around the problem by limiting the target range
heuristically to below the traditional bzImage max range.  This number
is arbitrary and not always correct, and a much better result would be
obtained by having kexec communicate this number based on the kernel
header information and any appropriate command line options.

Reported-and-Bisected-by: CAI Qian <caiqian@redhat.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4CABAF2A.5090501@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-10-05 21:43:14 -07:00
Alex Deucher
2126d0a4a2 drm/radeon/kms: make sure blit addr masks are 64 bit
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-06 14:18:48 +10:00
Rasesh Mody
b7ee31c5af bna: scope and dead code cleanup
As suggested by Stephen Hemminger:
1) Made functions and data structures static wherever possible.
2) Removed unused code.

Signed-off-by: Debashis Dutt <ddutt@brocade.com>
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05 20:39:39 -07:00
Rasesh Mody
e2fa6f2ef6 bna: fix interrupt handling
This fix handles the case when IRQ handler is called (for shared IRQs)
even before the driver is ready to handle interrupts.

Signed-off-by: Debashis Dutt <ddutt@brocade.com>
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05 20:39:38 -07:00
Eric Dumazet
ebc0ffae5d fib: RCU conversion of fib_lookup()
fib_lookup() converted to be called in RCU protected context, no
reference taken and released on a contended cache line (fib_clntref)

fib_table_lookup() and fib_semantic_match() get an additional parameter.

struct fib_info gets an rcu_head field, and is freed after an rcu grace
period.

Stress test :
(Sending 160.000.000 UDP frames on same neighbour,
IP route cache disabled, dual E5540 @2.53GHz,
32bit kernel, FIB_HASH) (about same results for FIB_TRIE)

Before patch :

real	1m31.199s
user	0m13.761s
sys	23m24.780s

After patch:

real	1m5.375s
user	0m14.997s
sys	15m50.115s

Before patch Profile :

13044.00 15.4% __ip_route_output_key vmlinux
 8438.00 10.0% dst_destroy           vmlinux
 5983.00  7.1% fib_semantic_match    vmlinux
 5410.00  6.4% fib_rules_lookup      vmlinux
 4803.00  5.7% neigh_lookup          vmlinux
 4420.00  5.2% _raw_spin_lock        vmlinux
 3883.00  4.6% rt_set_nexthop        vmlinux
 3261.00  3.9% _raw_read_lock        vmlinux
 2794.00  3.3% fib_table_lookup      vmlinux
 2374.00  2.8% neigh_resolve_output  vmlinux
 2153.00  2.5% dst_alloc             vmlinux
 1502.00  1.8% _raw_read_lock_bh     vmlinux
 1484.00  1.8% kmem_cache_alloc      vmlinux
 1407.00  1.7% eth_header            vmlinux
 1406.00  1.7% ipv4_dst_destroy      vmlinux
 1298.00  1.5% __copy_from_user_ll   vmlinux
 1174.00  1.4% dev_queue_xmit        vmlinux
 1000.00  1.2% ip_output             vmlinux

After patch Profile :

13712.00 15.8% dst_destroy             vmlinux
 8548.00  9.9% __ip_route_output_key   vmlinux
 7017.00  8.1% neigh_lookup            vmlinux
 4554.00  5.3% fib_semantic_match      vmlinux
 4067.00  4.7% _raw_read_lock          vmlinux
 3491.00  4.0% dst_alloc               vmlinux
 3186.00  3.7% neigh_resolve_output    vmlinux
 3103.00  3.6% fib_table_lookup        vmlinux
 2098.00  2.4% _raw_read_lock_bh       vmlinux
 2081.00  2.4% kmem_cache_alloc        vmlinux
 2013.00  2.3% _raw_spin_lock          vmlinux
 1763.00  2.0% __copy_from_user_ll     vmlinux
 1763.00  2.0% ip_output               vmlinux
 1761.00  2.0% ipv4_dst_destroy        vmlinux
 1631.00  1.9% eth_header              vmlinux
 1440.00  1.7% _raw_read_unlock_bh     vmlinux

Reference results, if IP route cache is enabled :

real	0m29.718s
user	0m10.845s
sys	7m37.341s

25213.00 29.5% __ip_route_output_key   vmlinux
 9011.00 10.5% dst_release             vmlinux
 4817.00  5.6% ip_push_pending_frames  vmlinux
 4232.00  5.0% ip_finish_output        vmlinux
 3940.00  4.6% udp_sendmsg             vmlinux
 3730.00  4.4% __copy_from_user_ll     vmlinux
 3716.00  4.4% ip_route_output_flow    vmlinux
 2451.00  2.9% __xfrm_lookup           vmlinux
 2221.00  2.6% ip_append_data          vmlinux
 1718.00  2.0% _raw_spin_lock_bh       vmlinux
 1655.00  1.9% __alloc_skb             vmlinux
 1572.00  1.8% sock_wfree              vmlinux
 1345.00  1.6% kfree                   vmlinux

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05 20:39:38 -07:00